|  | /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) | 
|  | * All rights reserved. | 
|  | * | 
|  | * This package is an SSL implementation written | 
|  | * by Eric Young (eay@cryptsoft.com). | 
|  | * The implementation was written so as to conform with Netscapes SSL. | 
|  | * | 
|  | * This library is free for commercial and non-commercial use as long as | 
|  | * the following conditions are aheared to.  The following conditions | 
|  | * apply to all code found in this distribution, be it the RC4, RSA, | 
|  | * lhash, DES, etc., code; not just the SSL code.  The SSL documentation | 
|  | * included with this distribution is covered by the same copyright terms | 
|  | * except that the holder is Tim Hudson (tjh@cryptsoft.com). | 
|  | * | 
|  | * Copyright remains Eric Young's, and as such any Copyright notices in | 
|  | * the code are not to be removed. | 
|  | * If this package is used in a product, Eric Young should be given attribution | 
|  | * as the author of the parts of the library used. | 
|  | * This can be in the form of a textual message at program startup or | 
|  | * in documentation (online or textual) provided with the package. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * 3. All advertising materials mentioning features or use of this software | 
|  | *    must display the following acknowledgement: | 
|  | *    "This product includes cryptographic software written by | 
|  | *     Eric Young (eay@cryptsoft.com)" | 
|  | *    The word 'cryptographic' can be left out if the rouines from the library | 
|  | *    being used are not cryptographic related :-). | 
|  | * 4. If you include any Windows specific code (or a derivative thereof) from | 
|  | *    the apps directory (application code) you must include an acknowledgement: | 
|  | *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND | 
|  | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
|  | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
|  | * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE | 
|  | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | 
|  | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | 
|  | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | * | 
|  | * The licence and distribution terms for any publically available version or | 
|  | * derivative of this code cannot be changed.  i.e. this code cannot simply be | 
|  | * copied and put under another distribution licence | 
|  | * [including the GNU Public Licence.] */ | 
|  |  | 
|  | #include <openssl/bio.h> | 
|  |  | 
|  | #include <assert.h> | 
|  | #include <errno.h> | 
|  | #include <string.h> | 
|  |  | 
|  | #if !defined(OPENSSL_WINDOWS) | 
|  | #include <sys/socket.h> | 
|  | #include <netinet/in.h> | 
|  | #include <arpa/inet.h> | 
|  | #include <unistd.h> | 
|  | #else | 
|  | OPENSSL_MSVC_PRAGMA(warning(push, 3)) | 
|  | #include <winsock2.h> | 
|  | #include <ws2tcpip.h> | 
|  | OPENSSL_MSVC_PRAGMA(warning(pop)) | 
|  | #endif | 
|  |  | 
|  | #include <openssl/buf.h> | 
|  | #include <openssl/err.h> | 
|  | #include <openssl/mem.h> | 
|  |  | 
|  | #include "internal.h" | 
|  |  | 
|  |  | 
|  | enum { | 
|  | BIO_CONN_S_BEFORE, | 
|  | BIO_CONN_S_BLOCKED_CONNECT, | 
|  | BIO_CONN_S_OK, | 
|  | }; | 
|  |  | 
|  | typedef struct bio_connect_st { | 
|  | int state; | 
|  |  | 
|  | char *param_hostname; | 
|  | char *param_port; | 
|  | int nbio; | 
|  |  | 
|  | unsigned short port; | 
|  |  | 
|  | struct sockaddr_storage them; | 
|  | socklen_t them_length; | 
|  |  | 
|  | /* the file descriptor is kept in bio->num in order to match the socket | 
|  | * BIO. */ | 
|  |  | 
|  | /* info_callback is called when the connection is initially made | 
|  | * callback(BIO,state,ret);  The callback should return 'ret', state is for | 
|  | * compatibility with the SSL info_callback. */ | 
|  | int (*info_callback)(const BIO *bio, int state, int ret); | 
|  | } BIO_CONNECT; | 
|  |  | 
|  | #if !defined(OPENSSL_WINDOWS) | 
|  | static int closesocket(int sock) { | 
|  | return close(sock); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* split_host_and_port sets |*out_host| and |*out_port| to the host and port | 
|  | * parsed from |name|. It returns one on success or zero on error. Even when | 
|  | * successful, |*out_port| may be NULL on return if no port was specified. */ | 
|  | static int split_host_and_port(char **out_host, char **out_port, const char *name) { | 
|  | const char *host, *port = NULL; | 
|  | size_t host_len = 0; | 
|  |  | 
|  | *out_host = NULL; | 
|  | *out_port = NULL; | 
|  |  | 
|  | if (name[0] == '[') {  /* bracketed IPv6 address */ | 
|  | const char *close = strchr(name, ']'); | 
|  | if (close == NULL) { | 
|  | return 0; | 
|  | } | 
|  | host = name + 1; | 
|  | host_len = close - host; | 
|  | if (close[1] == ':') {  /* [IP]:port */ | 
|  | port = close + 2; | 
|  | } else if (close[1] != 0) { | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | const char *colon = strchr(name, ':'); | 
|  | if (colon == NULL || strchr(colon + 1, ':') != NULL) {  /* IPv6 address */ | 
|  | host = name; | 
|  | host_len = strlen(name); | 
|  | } else {  /* host:port */ | 
|  | host = name; | 
|  | host_len = colon - name; | 
|  | port = colon + 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | *out_host = BUF_strndup(host, host_len); | 
|  | if (*out_host == NULL) { | 
|  | return 0; | 
|  | } | 
|  | if (port == NULL) { | 
|  | *out_port = NULL; | 
|  | return 1; | 
|  | } | 
|  | *out_port = OPENSSL_strdup(port); | 
|  | if (*out_port == NULL) { | 
|  | OPENSSL_free(*out_host); | 
|  | *out_host = NULL; | 
|  | return 0; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int conn_state(BIO *bio, BIO_CONNECT *c) { | 
|  | int ret = -1, i; | 
|  | int (*cb)(const BIO *, int, int) = NULL; | 
|  |  | 
|  | if (c->info_callback != NULL) { | 
|  | cb = c->info_callback; | 
|  | } | 
|  |  | 
|  | for (;;) { | 
|  | switch (c->state) { | 
|  | case BIO_CONN_S_BEFORE: | 
|  | /* If there's a hostname and a port, assume that both are | 
|  | * exactly what they say. If there is only a hostname, try | 
|  | * (just once) to split it into a hostname and port. */ | 
|  |  | 
|  | if (c->param_hostname == NULL) { | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_NO_HOSTNAME_SPECIFIED); | 
|  | goto exit_loop; | 
|  | } | 
|  |  | 
|  | if (c->param_port == NULL) { | 
|  | char *host, *port; | 
|  | if (!split_host_and_port(&host, &port, c->param_hostname) || | 
|  | port == NULL) { | 
|  | OPENSSL_free(host); | 
|  | OPENSSL_free(port); | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_NO_PORT_SPECIFIED); | 
|  | ERR_add_error_data(2, "host=", c->param_hostname); | 
|  | goto exit_loop; | 
|  | } | 
|  |  | 
|  | OPENSSL_free(c->param_port); | 
|  | c->param_port = port; | 
|  | OPENSSL_free(c->param_hostname); | 
|  | c->param_hostname = host; | 
|  | } | 
|  |  | 
|  | if (!bio_ip_and_port_to_socket_and_addr( | 
|  | &bio->num, &c->them, &c->them_length, c->param_hostname, | 
|  | c->param_port)) { | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_UNABLE_TO_CREATE_SOCKET); | 
|  | ERR_add_error_data(4, "host=", c->param_hostname, ":", c->param_port); | 
|  | goto exit_loop; | 
|  | } | 
|  |  | 
|  | if (c->nbio) { | 
|  | if (!bio_socket_nbio(bio->num, 1)) { | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_ERROR_SETTING_NBIO); | 
|  | ERR_add_error_data(4, "host=", c->param_hostname, ":", | 
|  | c->param_port); | 
|  | goto exit_loop; | 
|  | } | 
|  | } | 
|  |  | 
|  | i = 1; | 
|  | ret = setsockopt(bio->num, SOL_SOCKET, SO_KEEPALIVE, (char *)&i, | 
|  | sizeof(i)); | 
|  | if (ret < 0) { | 
|  | OPENSSL_PUT_SYSTEM_ERROR(); | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_KEEPALIVE); | 
|  | ERR_add_error_data(4, "host=", c->param_hostname, ":", c->param_port); | 
|  | goto exit_loop; | 
|  | } | 
|  |  | 
|  | BIO_clear_retry_flags(bio); | 
|  | ret = connect(bio->num, (struct sockaddr*) &c->them, c->them_length); | 
|  | if (ret < 0) { | 
|  | if (bio_fd_should_retry(ret)) { | 
|  | BIO_set_flags(bio, (BIO_FLAGS_IO_SPECIAL | BIO_FLAGS_SHOULD_RETRY)); | 
|  | c->state = BIO_CONN_S_BLOCKED_CONNECT; | 
|  | bio->retry_reason = BIO_RR_CONNECT; | 
|  | } else { | 
|  | OPENSSL_PUT_SYSTEM_ERROR(); | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_CONNECT_ERROR); | 
|  | ERR_add_error_data(4, "host=", c->param_hostname, ":", | 
|  | c->param_port); | 
|  | } | 
|  | goto exit_loop; | 
|  | } else { | 
|  | c->state = BIO_CONN_S_OK; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case BIO_CONN_S_BLOCKED_CONNECT: | 
|  | i = bio_sock_error(bio->num); | 
|  | if (i) { | 
|  | if (bio_fd_should_retry(ret)) { | 
|  | BIO_set_flags(bio, (BIO_FLAGS_IO_SPECIAL | BIO_FLAGS_SHOULD_RETRY)); | 
|  | c->state = BIO_CONN_S_BLOCKED_CONNECT; | 
|  | bio->retry_reason = BIO_RR_CONNECT; | 
|  | ret = -1; | 
|  | } else { | 
|  | BIO_clear_retry_flags(bio); | 
|  | OPENSSL_PUT_SYSTEM_ERROR(); | 
|  | OPENSSL_PUT_ERROR(BIO, BIO_R_NBIO_CONNECT_ERROR); | 
|  | ERR_add_error_data(4, "host=", c->param_hostname, ":", c->param_port); | 
|  | ret = 0; | 
|  | } | 
|  | goto exit_loop; | 
|  | } else { | 
|  | c->state = BIO_CONN_S_OK; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case BIO_CONN_S_OK: | 
|  | ret = 1; | 
|  | goto exit_loop; | 
|  | default: | 
|  | assert(0); | 
|  | goto exit_loop; | 
|  | } | 
|  |  | 
|  | if (cb != NULL) { | 
|  | ret = cb((BIO *)bio, c->state, ret); | 
|  | if (ret == 0) { | 
|  | goto end; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | exit_loop: | 
|  | if (cb != NULL) { | 
|  | ret = cb((BIO *)bio, c->state, ret); | 
|  | } | 
|  |  | 
|  | end: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static BIO_CONNECT *BIO_CONNECT_new(void) { | 
|  | BIO_CONNECT *ret = OPENSSL_malloc(sizeof(BIO_CONNECT)); | 
|  |  | 
|  | if (ret == NULL) { | 
|  | return NULL; | 
|  | } | 
|  | memset(ret, 0, sizeof(BIO_CONNECT)); | 
|  |  | 
|  | ret->state = BIO_CONN_S_BEFORE; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void BIO_CONNECT_free(BIO_CONNECT *c) { | 
|  | if (c == NULL) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | OPENSSL_free(c->param_hostname); | 
|  | OPENSSL_free(c->param_port); | 
|  | OPENSSL_free(c); | 
|  | } | 
|  |  | 
|  | static int conn_new(BIO *bio) { | 
|  | bio->init = 0; | 
|  | bio->num = -1; | 
|  | bio->flags = 0; | 
|  | bio->ptr = (char *)BIO_CONNECT_new(); | 
|  | return bio->ptr != NULL; | 
|  | } | 
|  |  | 
|  | static void conn_close_socket(BIO *bio) { | 
|  | BIO_CONNECT *c = (BIO_CONNECT *) bio->ptr; | 
|  |  | 
|  | if (bio->num == -1) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Only do a shutdown if things were established */ | 
|  | if (c->state == BIO_CONN_S_OK) { | 
|  | shutdown(bio->num, 2); | 
|  | } | 
|  | closesocket(bio->num); | 
|  | bio->num = -1; | 
|  | } | 
|  |  | 
|  | static int conn_free(BIO *bio) { | 
|  | if (bio == NULL) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (bio->shutdown) { | 
|  | conn_close_socket(bio); | 
|  | } | 
|  |  | 
|  | BIO_CONNECT_free((BIO_CONNECT*) bio->ptr); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int conn_read(BIO *bio, char *out, int out_len) { | 
|  | int ret = 0; | 
|  | BIO_CONNECT *data; | 
|  |  | 
|  | data = (BIO_CONNECT *)bio->ptr; | 
|  | if (data->state != BIO_CONN_S_OK) { | 
|  | ret = conn_state(bio, data); | 
|  | if (ret <= 0) { | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | bio_clear_socket_error(); | 
|  | ret = recv(bio->num, out, out_len, 0); | 
|  | BIO_clear_retry_flags(bio); | 
|  | if (ret <= 0) { | 
|  | if (bio_fd_should_retry(ret)) { | 
|  | BIO_set_retry_read(bio); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int conn_write(BIO *bio, const char *in, int in_len) { | 
|  | int ret; | 
|  | BIO_CONNECT *data; | 
|  |  | 
|  | data = (BIO_CONNECT *)bio->ptr; | 
|  | if (data->state != BIO_CONN_S_OK) { | 
|  | ret = conn_state(bio, data); | 
|  | if (ret <= 0) { | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | bio_clear_socket_error(); | 
|  | ret = send(bio->num, in, in_len, 0); | 
|  | BIO_clear_retry_flags(bio); | 
|  | if (ret <= 0) { | 
|  | if (bio_fd_should_retry(ret)) { | 
|  | BIO_set_retry_write(bio); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static long conn_ctrl(BIO *bio, int cmd, long num, void *ptr) { | 
|  | int *ip; | 
|  | long ret = 1; | 
|  | BIO_CONNECT *data; | 
|  |  | 
|  | data = (BIO_CONNECT *)bio->ptr; | 
|  |  | 
|  | switch (cmd) { | 
|  | case BIO_CTRL_RESET: | 
|  | ret = 0; | 
|  | data->state = BIO_CONN_S_BEFORE; | 
|  | conn_close_socket(bio); | 
|  | bio->flags = 0; | 
|  | break; | 
|  | case BIO_C_DO_STATE_MACHINE: | 
|  | /* use this one to start the connection */ | 
|  | if (data->state != BIO_CONN_S_OK) { | 
|  | ret = (long)conn_state(bio, data); | 
|  | } else { | 
|  | ret = 1; | 
|  | } | 
|  | break; | 
|  | case BIO_C_SET_CONNECT: | 
|  | if (ptr != NULL) { | 
|  | bio->init = 1; | 
|  | if (num == 0) { | 
|  | OPENSSL_free(data->param_hostname); | 
|  | data->param_hostname = BUF_strdup(ptr); | 
|  | if (data->param_hostname == NULL) { | 
|  | ret = 0; | 
|  | } | 
|  | } else if (num == 1) { | 
|  | OPENSSL_free(data->param_port); | 
|  | data->param_port = BUF_strdup(ptr); | 
|  | if (data->param_port == NULL) { | 
|  | ret = 0; | 
|  | } | 
|  | } else { | 
|  | ret = 0; | 
|  | } | 
|  | } | 
|  | break; | 
|  | case BIO_C_SET_NBIO: | 
|  | data->nbio = (int)num; | 
|  | break; | 
|  | case BIO_C_GET_FD: | 
|  | if (bio->init) { | 
|  | ip = (int *)ptr; | 
|  | if (ip != NULL) { | 
|  | *ip = bio->num; | 
|  | } | 
|  | ret = bio->num; | 
|  | } else { | 
|  | ret = -1; | 
|  | } | 
|  | break; | 
|  | case BIO_CTRL_GET_CLOSE: | 
|  | ret = bio->shutdown; | 
|  | break; | 
|  | case BIO_CTRL_SET_CLOSE: | 
|  | bio->shutdown = (int)num; | 
|  | break; | 
|  | case BIO_CTRL_PENDING: | 
|  | case BIO_CTRL_WPENDING: | 
|  | ret = 0; | 
|  | break; | 
|  | case BIO_CTRL_FLUSH: | 
|  | break; | 
|  | case BIO_CTRL_SET_CALLBACK: { | 
|  | #if 0 /* FIXME: Should this be used?  -- Richard Levitte */ | 
|  | OPENSSL_PUT_ERROR(BIO, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | 
|  | ret = -1; | 
|  | #else | 
|  | ret = 0; | 
|  | #endif | 
|  | } break; | 
|  | case BIO_CTRL_GET_CALLBACK: { | 
|  | int (**fptr)(const BIO *bio, int state, int xret); | 
|  | fptr = (int (**)(const BIO *bio, int state, int xret))ptr; | 
|  | *fptr = data->info_callback; | 
|  | } break; | 
|  | default: | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | return (ret); | 
|  | } | 
|  |  | 
|  | static long conn_callback_ctrl(BIO *bio, int cmd, bio_info_cb fp) { | 
|  | long ret = 1; | 
|  | BIO_CONNECT *data; | 
|  |  | 
|  | data = (BIO_CONNECT *)bio->ptr; | 
|  |  | 
|  | switch (cmd) { | 
|  | case BIO_CTRL_SET_CALLBACK: { | 
|  | data->info_callback = (int (*)(const struct bio_st *, int, int))fp; | 
|  | } break; | 
|  | default: | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int conn_puts(BIO *bp, const char *str) { | 
|  | return conn_write(bp, str, strlen(str)); | 
|  | } | 
|  |  | 
|  | BIO *BIO_new_connect(const char *hostname) { | 
|  | BIO *ret; | 
|  |  | 
|  | ret = BIO_new(BIO_s_connect()); | 
|  | if (ret == NULL) { | 
|  | return NULL; | 
|  | } | 
|  | if (!BIO_set_conn_hostname(ret, hostname)) { | 
|  | BIO_free(ret); | 
|  | return NULL; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const BIO_METHOD methods_connectp = { | 
|  | BIO_TYPE_CONNECT, "socket connect",         conn_write, conn_read, | 
|  | conn_puts,        NULL /* connect_gets, */, conn_ctrl,  conn_new, | 
|  | conn_free,        conn_callback_ctrl, | 
|  | }; | 
|  |  | 
|  | const BIO_METHOD *BIO_s_connect(void) { return &methods_connectp; } | 
|  |  | 
|  | int BIO_set_conn_hostname(BIO *bio, const char *name) { | 
|  | return BIO_ctrl(bio, BIO_C_SET_CONNECT, 0, (void*) name); | 
|  | } | 
|  |  | 
|  | int BIO_set_conn_port(BIO *bio, const char *port_str) { | 
|  | return BIO_ctrl(bio, BIO_C_SET_CONNECT, 1, (void*) port_str); | 
|  | } | 
|  |  | 
|  | int BIO_set_conn_int_port(BIO *bio, const int *port) { | 
|  | char buf[DECIMAL_SIZE(int) + 1]; | 
|  | BIO_snprintf(buf, sizeof(buf), "%d", *port); | 
|  | return BIO_set_conn_port(bio, buf); | 
|  | } | 
|  |  | 
|  | int BIO_set_nbio(BIO *bio, int on) { | 
|  | return BIO_ctrl(bio, BIO_C_SET_NBIO, on, NULL); | 
|  | } | 
|  |  | 
|  | int BIO_do_connect(BIO *bio) { | 
|  | return BIO_ctrl(bio, BIO_C_DO_STATE_MACHINE, 0, NULL); | 
|  | } |