| #! /usr/bin/env perl |
| # Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved. |
| # |
| # Licensed under the OpenSSL license (the "License"). You may not use |
| # this file except in compliance with the License. You can obtain a copy |
| # in the file LICENSE in the source distribution or at |
| # https://www.openssl.org/source/license.html |
| |
| # |
| # ==================================================================== |
| # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL |
| # project. The module is, however, dual licensed under OpenSSL and |
| # CRYPTOGAMS licenses depending on where you obtain it. For further |
| # details see http://www.openssl.org/~appro/cryptogams/. |
| # ==================================================================== |
| # |
| # This module implements support for ARMv8 AES instructions. The |
| # module is endian-agnostic in sense that it supports both big- and |
| # little-endian cases. As does it support both 32- and 64-bit modes |
| # of operation. Latter is achieved by limiting amount of utilized |
| # registers to 16, which implies additional NEON load and integer |
| # instructions. This has no effect on mighty Apple A7, where results |
| # are literally equal to the theoretical estimates based on AES |
| # instruction latencies and issue rates. On Cortex-A53, an in-order |
| # execution core, this costs up to 10-15%, which is partially |
| # compensated by implementing dedicated code path for 128-bit |
| # CBC encrypt case. On Cortex-A57 parallelizable mode performance |
| # seems to be limited by sheer amount of NEON instructions... |
| # |
| # Performance in cycles per byte processed with 128-bit key: |
| # |
| # CBC enc CBC dec CTR |
| # Apple A7 2.39 1.20 1.20 |
| # Cortex-A53 1.32 1.29 1.46 |
| # Cortex-A57(*) 1.95 0.85 0.93 |
| # Denver 1.96 0.86 0.80 |
| # Mongoose 1.33 1.20 1.20 |
| # |
| # (*) original 3.64/1.34/1.32 results were for r0p0 revision |
| # and are still same even for updated module; |
| |
| $flavour = shift; |
| $output = shift; |
| |
| $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; |
| ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or |
| ( $xlate="${dir}../../../perlasm/arm-xlate.pl" and -f $xlate) or |
| die "can't locate arm-xlate.pl"; |
| |
| open OUT,"| \"$^X\" $xlate $flavour $output"; |
| *STDOUT=*OUT; |
| |
| $prefix="aes_hw"; |
| |
| $code=<<___; |
| #include <openssl/arm_arch.h> |
| |
| #if __ARM_MAX_ARCH__>=7 |
| .text |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| #if !defined(__clang__) || defined(BORINGSSL_CLANG_SUPPORTS_DOT_ARCH) |
| .arch armv8-a+crypto |
| #endif |
| ___ |
| $code.=<<___ if ($flavour !~ /64/); |
| .arch armv7-a // don't confuse not-so-latest binutils with argv8 :-) |
| .fpu neon |
| .code 32 |
| #undef __thumb2__ |
| ___ |
| |
| # Assembler mnemonics are an eclectic mix of 32- and 64-bit syntax, |
| # NEON is mostly 32-bit mnemonics, integer - mostly 64. Goal is to |
| # maintain both 32- and 64-bit codes within single module and |
| # transliterate common code to either flavour with regex vodoo. |
| # |
| {{{ |
| my ($inp,$bits,$out,$ptr,$rounds)=("x0","w1","x2","x3","w12"); |
| my ($zero,$rcon,$mask,$in0,$in1,$tmp,$key)= |
| $flavour=~/64/? map("q$_",(0..6)) : map("q$_",(0..3,8..10)); |
| |
| |
| $code.=<<___; |
| .align 5 |
| .Lrcon: |
| .long 0x01,0x01,0x01,0x01 |
| .long 0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d // rotate-n-splat |
| .long 0x1b,0x1b,0x1b,0x1b |
| |
| .globl ${prefix}_set_encrypt_key |
| .type ${prefix}_set_encrypt_key,%function |
| .align 5 |
| ${prefix}_set_encrypt_key: |
| .Lenc_key: |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| stp x29,x30,[sp,#-16]! |
| add x29,sp,#0 |
| ___ |
| $code.=<<___; |
| mov $ptr,#-1 |
| cmp $inp,#0 |
| b.eq .Lenc_key_abort |
| cmp $out,#0 |
| b.eq .Lenc_key_abort |
| mov $ptr,#-2 |
| cmp $bits,#128 |
| b.lt .Lenc_key_abort |
| cmp $bits,#256 |
| b.gt .Lenc_key_abort |
| tst $bits,#0x3f |
| b.ne .Lenc_key_abort |
| |
| adr $ptr,.Lrcon |
| cmp $bits,#192 |
| |
| veor $zero,$zero,$zero |
| vld1.8 {$in0},[$inp],#16 |
| mov $bits,#8 // reuse $bits |
| vld1.32 {$rcon,$mask},[$ptr],#32 |
| |
| b.lt .Loop128 |
| b.eq .L192 |
| b .L256 |
| |
| .align 4 |
| .Loop128: |
| vtbl.8 $key,{$in0},$mask |
| vext.8 $tmp,$zero,$in0,#12 |
| vst1.32 {$in0},[$out],#16 |
| aese $key,$zero |
| subs $bits,$bits,#1 |
| |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $key,$key,$rcon |
| veor $in0,$in0,$tmp |
| vshl.u8 $rcon,$rcon,#1 |
| veor $in0,$in0,$key |
| b.ne .Loop128 |
| |
| vld1.32 {$rcon},[$ptr] |
| |
| vtbl.8 $key,{$in0},$mask |
| vext.8 $tmp,$zero,$in0,#12 |
| vst1.32 {$in0},[$out],#16 |
| aese $key,$zero |
| |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $key,$key,$rcon |
| veor $in0,$in0,$tmp |
| vshl.u8 $rcon,$rcon,#1 |
| veor $in0,$in0,$key |
| |
| vtbl.8 $key,{$in0},$mask |
| vext.8 $tmp,$zero,$in0,#12 |
| vst1.32 {$in0},[$out],#16 |
| aese $key,$zero |
| |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $key,$key,$rcon |
| veor $in0,$in0,$tmp |
| veor $in0,$in0,$key |
| vst1.32 {$in0},[$out] |
| add $out,$out,#0x50 |
| |
| mov $rounds,#10 |
| b .Ldone |
| |
| .align 4 |
| .L192: |
| vld1.8 {$in1},[$inp],#8 |
| vmov.i8 $key,#8 // borrow $key |
| vst1.32 {$in0},[$out],#16 |
| vsub.i8 $mask,$mask,$key // adjust the mask |
| |
| .Loop192: |
| vtbl.8 $key,{$in1},$mask |
| vext.8 $tmp,$zero,$in0,#12 |
| vst1.32 {$in1},[$out],#8 |
| aese $key,$zero |
| subs $bits,$bits,#1 |
| |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in0,$in0,$tmp |
| |
| vdup.32 $tmp,${in0}[3] |
| veor $tmp,$tmp,$in1 |
| veor $key,$key,$rcon |
| vext.8 $in1,$zero,$in1,#12 |
| vshl.u8 $rcon,$rcon,#1 |
| veor $in1,$in1,$tmp |
| veor $in0,$in0,$key |
| veor $in1,$in1,$key |
| vst1.32 {$in0},[$out],#16 |
| b.ne .Loop192 |
| |
| mov $rounds,#12 |
| add $out,$out,#0x20 |
| b .Ldone |
| |
| .align 4 |
| .L256: |
| vld1.8 {$in1},[$inp] |
| mov $bits,#7 |
| mov $rounds,#14 |
| vst1.32 {$in0},[$out],#16 |
| |
| .Loop256: |
| vtbl.8 $key,{$in1},$mask |
| vext.8 $tmp,$zero,$in0,#12 |
| vst1.32 {$in1},[$out],#16 |
| aese $key,$zero |
| subs $bits,$bits,#1 |
| |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in0,$in0,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $key,$key,$rcon |
| veor $in0,$in0,$tmp |
| vshl.u8 $rcon,$rcon,#1 |
| veor $in0,$in0,$key |
| vst1.32 {$in0},[$out],#16 |
| b.eq .Ldone |
| |
| vdup.32 $key,${in0}[3] // just splat |
| vext.8 $tmp,$zero,$in1,#12 |
| aese $key,$zero |
| |
| veor $in1,$in1,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in1,$in1,$tmp |
| vext.8 $tmp,$zero,$tmp,#12 |
| veor $in1,$in1,$tmp |
| |
| veor $in1,$in1,$key |
| b .Loop256 |
| |
| .Ldone: |
| str $rounds,[$out] |
| mov $ptr,#0 |
| |
| .Lenc_key_abort: |
| mov x0,$ptr // return value |
| `"ldr x29,[sp],#16" if ($flavour =~ /64/)` |
| ret |
| .size ${prefix}_set_encrypt_key,.-${prefix}_set_encrypt_key |
| |
| .globl ${prefix}_set_decrypt_key |
| .type ${prefix}_set_decrypt_key,%function |
| .align 5 |
| ${prefix}_set_decrypt_key: |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| stp x29,x30,[sp,#-16]! |
| add x29,sp,#0 |
| ___ |
| $code.=<<___ if ($flavour !~ /64/); |
| stmdb sp!,{r4,lr} |
| ___ |
| $code.=<<___; |
| bl .Lenc_key |
| |
| cmp x0,#0 |
| b.ne .Ldec_key_abort |
| |
| sub $out,$out,#240 // restore original $out |
| mov x4,#-16 |
| add $inp,$out,x12,lsl#4 // end of key schedule |
| |
| vld1.32 {v0.16b},[$out] |
| vld1.32 {v1.16b},[$inp] |
| vst1.32 {v0.16b},[$inp],x4 |
| vst1.32 {v1.16b},[$out],#16 |
| |
| .Loop_imc: |
| vld1.32 {v0.16b},[$out] |
| vld1.32 {v1.16b},[$inp] |
| aesimc v0.16b,v0.16b |
| aesimc v1.16b,v1.16b |
| vst1.32 {v0.16b},[$inp],x4 |
| vst1.32 {v1.16b},[$out],#16 |
| cmp $inp,$out |
| b.hi .Loop_imc |
| |
| vld1.32 {v0.16b},[$out] |
| aesimc v0.16b,v0.16b |
| vst1.32 {v0.16b},[$inp] |
| |
| eor x0,x0,x0 // return value |
| .Ldec_key_abort: |
| ___ |
| $code.=<<___ if ($flavour !~ /64/); |
| ldmia sp!,{r4,pc} |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| ldp x29,x30,[sp],#16 |
| ret |
| ___ |
| $code.=<<___; |
| .size ${prefix}_set_decrypt_key,.-${prefix}_set_decrypt_key |
| ___ |
| }}} |
| {{{ |
| sub gen_block () { |
| my $dir = shift; |
| my ($e,$mc) = $dir eq "en" ? ("e","mc") : ("d","imc"); |
| my ($inp,$out,$key)=map("x$_",(0..2)); |
| my $rounds="w3"; |
| my ($rndkey0,$rndkey1,$inout)=map("q$_",(0..3)); |
| |
| $code.=<<___; |
| .globl ${prefix}_${dir}crypt |
| .type ${prefix}_${dir}crypt,%function |
| .align 5 |
| ${prefix}_${dir}crypt: |
| ldr $rounds,[$key,#240] |
| vld1.32 {$rndkey0},[$key],#16 |
| vld1.8 {$inout},[$inp] |
| sub $rounds,$rounds,#2 |
| vld1.32 {$rndkey1},[$key],#16 |
| |
| .Loop_${dir}c: |
| aes$e $inout,$rndkey0 |
| aes$mc $inout,$inout |
| vld1.32 {$rndkey0},[$key],#16 |
| subs $rounds,$rounds,#2 |
| aes$e $inout,$rndkey1 |
| aes$mc $inout,$inout |
| vld1.32 {$rndkey1},[$key],#16 |
| b.gt .Loop_${dir}c |
| |
| aes$e $inout,$rndkey0 |
| aes$mc $inout,$inout |
| vld1.32 {$rndkey0},[$key] |
| aes$e $inout,$rndkey1 |
| veor $inout,$inout,$rndkey0 |
| |
| vst1.8 {$inout},[$out] |
| ret |
| .size ${prefix}_${dir}crypt,.-${prefix}_${dir}crypt |
| ___ |
| } |
| &gen_block("en"); |
| &gen_block("de"); |
| }}} |
| {{{ |
| my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); my $enc="w5"; |
| my ($rounds,$cnt,$key_,$step,$step1)=($enc,"w6","x7","x8","x12"); |
| my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7)); |
| |
| my ($dat,$tmp,$rndzero_n_last)=($dat0,$tmp0,$tmp1); |
| my ($key4,$key5,$key6,$key7)=("x6","x12","x14",$key); |
| |
| ### q8-q15 preloaded key schedule |
| |
| $code.=<<___; |
| .globl ${prefix}_cbc_encrypt |
| .type ${prefix}_cbc_encrypt,%function |
| .align 5 |
| ${prefix}_cbc_encrypt: |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| stp x29,x30,[sp,#-16]! |
| add x29,sp,#0 |
| ___ |
| $code.=<<___ if ($flavour !~ /64/); |
| mov ip,sp |
| stmdb sp!,{r4-r8,lr} |
| vstmdb sp!,{d8-d15} @ ABI specification says so |
| ldmia ip,{r4-r5} @ load remaining args |
| ___ |
| $code.=<<___; |
| subs $len,$len,#16 |
| mov $step,#16 |
| b.lo .Lcbc_abort |
| cclr $step,eq |
| |
| cmp $enc,#0 // en- or decrypting? |
| ldr $rounds,[$key,#240] |
| and $len,$len,#-16 |
| vld1.8 {$ivec},[$ivp] |
| vld1.8 {$dat},[$inp],$step |
| |
| vld1.32 {q8-q9},[$key] // load key schedule... |
| sub $rounds,$rounds,#6 |
| add $key_,$key,x5,lsl#4 // pointer to last 7 round keys |
| sub $rounds,$rounds,#2 |
| vld1.32 {q10-q11},[$key_],#32 |
| vld1.32 {q12-q13},[$key_],#32 |
| vld1.32 {q14-q15},[$key_],#32 |
| vld1.32 {$rndlast},[$key_] |
| |
| add $key_,$key,#32 |
| mov $cnt,$rounds |
| b.eq .Lcbc_dec |
| |
| cmp $rounds,#2 |
| veor $dat,$dat,$ivec |
| veor $rndzero_n_last,q8,$rndlast |
| b.eq .Lcbc_enc128 |
| |
| vld1.32 {$in0-$in1},[$key_] |
| add $key_,$key,#16 |
| add $key4,$key,#16*4 |
| add $key5,$key,#16*5 |
| aese $dat,q8 |
| aesmc $dat,$dat |
| add $key6,$key,#16*6 |
| add $key7,$key,#16*7 |
| b .Lenter_cbc_enc |
| |
| .align 4 |
| .Loop_cbc_enc: |
| aese $dat,q8 |
| aesmc $dat,$dat |
| vst1.8 {$ivec},[$out],#16 |
| .Lenter_cbc_enc: |
| aese $dat,q9 |
| aesmc $dat,$dat |
| aese $dat,$in0 |
| aesmc $dat,$dat |
| vld1.32 {q8},[$key4] |
| cmp $rounds,#4 |
| aese $dat,$in1 |
| aesmc $dat,$dat |
| vld1.32 {q9},[$key5] |
| b.eq .Lcbc_enc192 |
| |
| aese $dat,q8 |
| aesmc $dat,$dat |
| vld1.32 {q8},[$key6] |
| aese $dat,q9 |
| aesmc $dat,$dat |
| vld1.32 {q9},[$key7] |
| nop |
| |
| .Lcbc_enc192: |
| aese $dat,q8 |
| aesmc $dat,$dat |
| subs $len,$len,#16 |
| aese $dat,q9 |
| aesmc $dat,$dat |
| cclr $step,eq |
| aese $dat,q10 |
| aesmc $dat,$dat |
| aese $dat,q11 |
| aesmc $dat,$dat |
| vld1.8 {q8},[$inp],$step |
| aese $dat,q12 |
| aesmc $dat,$dat |
| veor q8,q8,$rndzero_n_last |
| aese $dat,q13 |
| aesmc $dat,$dat |
| vld1.32 {q9},[$key_] // re-pre-load rndkey[1] |
| aese $dat,q14 |
| aesmc $dat,$dat |
| aese $dat,q15 |
| veor $ivec,$dat,$rndlast |
| b.hs .Loop_cbc_enc |
| |
| vst1.8 {$ivec},[$out],#16 |
| b .Lcbc_done |
| |
| .align 5 |
| .Lcbc_enc128: |
| vld1.32 {$in0-$in1},[$key_] |
| aese $dat,q8 |
| aesmc $dat,$dat |
| b .Lenter_cbc_enc128 |
| .Loop_cbc_enc128: |
| aese $dat,q8 |
| aesmc $dat,$dat |
| vst1.8 {$ivec},[$out],#16 |
| .Lenter_cbc_enc128: |
| aese $dat,q9 |
| aesmc $dat,$dat |
| subs $len,$len,#16 |
| aese $dat,$in0 |
| aesmc $dat,$dat |
| cclr $step,eq |
| aese $dat,$in1 |
| aesmc $dat,$dat |
| aese $dat,q10 |
| aesmc $dat,$dat |
| aese $dat,q11 |
| aesmc $dat,$dat |
| vld1.8 {q8},[$inp],$step |
| aese $dat,q12 |
| aesmc $dat,$dat |
| aese $dat,q13 |
| aesmc $dat,$dat |
| aese $dat,q14 |
| aesmc $dat,$dat |
| veor q8,q8,$rndzero_n_last |
| aese $dat,q15 |
| veor $ivec,$dat,$rndlast |
| b.hs .Loop_cbc_enc128 |
| |
| vst1.8 {$ivec},[$out],#16 |
| b .Lcbc_done |
| ___ |
| { |
| my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9)); |
| $code.=<<___; |
| .align 5 |
| .Lcbc_dec: |
| vld1.8 {$dat2},[$inp],#16 |
| subs $len,$len,#32 // bias |
| add $cnt,$rounds,#2 |
| vorr $in1,$dat,$dat |
| vorr $dat1,$dat,$dat |
| vorr $in2,$dat2,$dat2 |
| b.lo .Lcbc_dec_tail |
| |
| vorr $dat1,$dat2,$dat2 |
| vld1.8 {$dat2},[$inp],#16 |
| vorr $in0,$dat,$dat |
| vorr $in1,$dat1,$dat1 |
| vorr $in2,$dat2,$dat2 |
| |
| .Loop3x_cbc_dec: |
| aesd $dat0,q8 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q8 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q8 |
| aesimc $dat2,$dat2 |
| vld1.32 {q8},[$key_],#16 |
| subs $cnt,$cnt,#2 |
| aesd $dat0,q9 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q9 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q9 |
| aesimc $dat2,$dat2 |
| vld1.32 {q9},[$key_],#16 |
| b.gt .Loop3x_cbc_dec |
| |
| aesd $dat0,q8 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q8 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q8 |
| aesimc $dat2,$dat2 |
| veor $tmp0,$ivec,$rndlast |
| subs $len,$len,#0x30 |
| veor $tmp1,$in0,$rndlast |
| mov.lo x6,$len // x6, $cnt, is zero at this point |
| aesd $dat0,q9 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q9 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q9 |
| aesimc $dat2,$dat2 |
| veor $tmp2,$in1,$rndlast |
| add $inp,$inp,x6 // $inp is adjusted in such way that |
| // at exit from the loop $dat1-$dat2 |
| // are loaded with last "words" |
| vorr $ivec,$in2,$in2 |
| mov $key_,$key |
| aesd $dat0,q12 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q12 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q12 |
| aesimc $dat2,$dat2 |
| vld1.8 {$in0},[$inp],#16 |
| aesd $dat0,q13 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q13 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q13 |
| aesimc $dat2,$dat2 |
| vld1.8 {$in1},[$inp],#16 |
| aesd $dat0,q14 |
| aesimc $dat0,$dat0 |
| aesd $dat1,q14 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q14 |
| aesimc $dat2,$dat2 |
| vld1.8 {$in2},[$inp],#16 |
| aesd $dat0,q15 |
| aesd $dat1,q15 |
| aesd $dat2,q15 |
| vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0] |
| add $cnt,$rounds,#2 |
| veor $tmp0,$tmp0,$dat0 |
| veor $tmp1,$tmp1,$dat1 |
| veor $dat2,$dat2,$tmp2 |
| vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1] |
| vst1.8 {$tmp0},[$out],#16 |
| vorr $dat0,$in0,$in0 |
| vst1.8 {$tmp1},[$out],#16 |
| vorr $dat1,$in1,$in1 |
| vst1.8 {$dat2},[$out],#16 |
| vorr $dat2,$in2,$in2 |
| b.hs .Loop3x_cbc_dec |
| |
| cmn $len,#0x30 |
| b.eq .Lcbc_done |
| nop |
| |
| .Lcbc_dec_tail: |
| aesd $dat1,q8 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q8 |
| aesimc $dat2,$dat2 |
| vld1.32 {q8},[$key_],#16 |
| subs $cnt,$cnt,#2 |
| aesd $dat1,q9 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q9 |
| aesimc $dat2,$dat2 |
| vld1.32 {q9},[$key_],#16 |
| b.gt .Lcbc_dec_tail |
| |
| aesd $dat1,q8 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q8 |
| aesimc $dat2,$dat2 |
| aesd $dat1,q9 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q9 |
| aesimc $dat2,$dat2 |
| aesd $dat1,q12 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q12 |
| aesimc $dat2,$dat2 |
| cmn $len,#0x20 |
| aesd $dat1,q13 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q13 |
| aesimc $dat2,$dat2 |
| veor $tmp1,$ivec,$rndlast |
| aesd $dat1,q14 |
| aesimc $dat1,$dat1 |
| aesd $dat2,q14 |
| aesimc $dat2,$dat2 |
| veor $tmp2,$in1,$rndlast |
| aesd $dat1,q15 |
| aesd $dat2,q15 |
| b.eq .Lcbc_dec_one |
| veor $tmp1,$tmp1,$dat1 |
| veor $tmp2,$tmp2,$dat2 |
| vorr $ivec,$in2,$in2 |
| vst1.8 {$tmp1},[$out],#16 |
| vst1.8 {$tmp2},[$out],#16 |
| b .Lcbc_done |
| |
| .Lcbc_dec_one: |
| veor $tmp1,$tmp1,$dat2 |
| vorr $ivec,$in2,$in2 |
| vst1.8 {$tmp1},[$out],#16 |
| |
| .Lcbc_done: |
| vst1.8 {$ivec},[$ivp] |
| .Lcbc_abort: |
| ___ |
| } |
| $code.=<<___ if ($flavour !~ /64/); |
| vldmia sp!,{d8-d15} |
| ldmia sp!,{r4-r8,pc} |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| ldr x29,[sp],#16 |
| ret |
| ___ |
| $code.=<<___; |
| .size ${prefix}_cbc_encrypt,.-${prefix}_cbc_encrypt |
| ___ |
| }}} |
| {{{ |
| my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); |
| my ($rounds,$cnt,$key_)=("w5","w6","x7"); |
| my ($ctr,$tctr0,$tctr1,$tctr2)=map("w$_",(8..10,12)); |
| my $step="x12"; # aliases with $tctr2 |
| |
| my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7)); |
| my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9)); |
| |
| my ($dat,$tmp)=($dat0,$tmp0); |
| |
| ### q8-q15 preloaded key schedule |
| |
| $code.=<<___; |
| .globl ${prefix}_ctr32_encrypt_blocks |
| .type ${prefix}_ctr32_encrypt_blocks,%function |
| .align 5 |
| ${prefix}_ctr32_encrypt_blocks: |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| stp x29,x30,[sp,#-16]! |
| add x29,sp,#0 |
| ___ |
| $code.=<<___ if ($flavour !~ /64/); |
| mov ip,sp |
| stmdb sp!,{r4-r10,lr} |
| vstmdb sp!,{d8-d15} @ ABI specification says so |
| ldr r4, [ip] @ load remaining arg |
| ___ |
| $code.=<<___; |
| ldr $rounds,[$key,#240] |
| |
| ldr $ctr, [$ivp, #12] |
| vld1.32 {$dat0},[$ivp] |
| |
| vld1.32 {q8-q9},[$key] // load key schedule... |
| sub $rounds,$rounds,#4 |
| mov $step,#16 |
| cmp $len,#2 |
| add $key_,$key,x5,lsl#4 // pointer to last 5 round keys |
| sub $rounds,$rounds,#2 |
| vld1.32 {q12-q13},[$key_],#32 |
| vld1.32 {q14-q15},[$key_],#32 |
| vld1.32 {$rndlast},[$key_] |
| add $key_,$key,#32 |
| mov $cnt,$rounds |
| cclr $step,lo |
| #ifndef __ARMEB__ |
| rev $ctr, $ctr |
| #endif |
| vorr $dat1,$dat0,$dat0 |
| add $tctr1, $ctr, #1 |
| vorr $dat2,$dat0,$dat0 |
| add $ctr, $ctr, #2 |
| vorr $ivec,$dat0,$dat0 |
| rev $tctr1, $tctr1 |
| vmov.32 ${dat1}[3],$tctr1 |
| b.ls .Lctr32_tail |
| rev $tctr2, $ctr |
| sub $len,$len,#3 // bias |
| vmov.32 ${dat2}[3],$tctr2 |
| b .Loop3x_ctr32 |
| |
| .align 4 |
| .Loop3x_ctr32: |
| aese $dat0,q8 |
| aesmc $dat0,$dat0 |
| aese $dat1,q8 |
| aesmc $dat1,$dat1 |
| aese $dat2,q8 |
| aesmc $dat2,$dat2 |
| vld1.32 {q8},[$key_],#16 |
| subs $cnt,$cnt,#2 |
| aese $dat0,q9 |
| aesmc $dat0,$dat0 |
| aese $dat1,q9 |
| aesmc $dat1,$dat1 |
| aese $dat2,q9 |
| aesmc $dat2,$dat2 |
| vld1.32 {q9},[$key_],#16 |
| b.gt .Loop3x_ctr32 |
| |
| aese $dat0,q8 |
| aesmc $tmp0,$dat0 |
| aese $dat1,q8 |
| aesmc $tmp1,$dat1 |
| vld1.8 {$in0},[$inp],#16 |
| vorr $dat0,$ivec,$ivec |
| aese $dat2,q8 |
| aesmc $dat2,$dat2 |
| vld1.8 {$in1},[$inp],#16 |
| vorr $dat1,$ivec,$ivec |
| aese $tmp0,q9 |
| aesmc $tmp0,$tmp0 |
| aese $tmp1,q9 |
| aesmc $tmp1,$tmp1 |
| vld1.8 {$in2},[$inp],#16 |
| mov $key_,$key |
| aese $dat2,q9 |
| aesmc $tmp2,$dat2 |
| vorr $dat2,$ivec,$ivec |
| add $tctr0,$ctr,#1 |
| aese $tmp0,q12 |
| aesmc $tmp0,$tmp0 |
| aese $tmp1,q12 |
| aesmc $tmp1,$tmp1 |
| veor $in0,$in0,$rndlast |
| add $tctr1,$ctr,#2 |
| aese $tmp2,q12 |
| aesmc $tmp2,$tmp2 |
| veor $in1,$in1,$rndlast |
| add $ctr,$ctr,#3 |
| aese $tmp0,q13 |
| aesmc $tmp0,$tmp0 |
| aese $tmp1,q13 |
| aesmc $tmp1,$tmp1 |
| veor $in2,$in2,$rndlast |
| rev $tctr0,$tctr0 |
| aese $tmp2,q13 |
| aesmc $tmp2,$tmp2 |
| vmov.32 ${dat0}[3], $tctr0 |
| rev $tctr1,$tctr1 |
| aese $tmp0,q14 |
| aesmc $tmp0,$tmp0 |
| aese $tmp1,q14 |
| aesmc $tmp1,$tmp1 |
| vmov.32 ${dat1}[3], $tctr1 |
| rev $tctr2,$ctr |
| aese $tmp2,q14 |
| aesmc $tmp2,$tmp2 |
| vmov.32 ${dat2}[3], $tctr2 |
| subs $len,$len,#3 |
| aese $tmp0,q15 |
| aese $tmp1,q15 |
| aese $tmp2,q15 |
| |
| veor $in0,$in0,$tmp0 |
| vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0] |
| vst1.8 {$in0},[$out],#16 |
| veor $in1,$in1,$tmp1 |
| mov $cnt,$rounds |
| vst1.8 {$in1},[$out],#16 |
| veor $in2,$in2,$tmp2 |
| vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1] |
| vst1.8 {$in2},[$out],#16 |
| b.hs .Loop3x_ctr32 |
| |
| adds $len,$len,#3 |
| b.eq .Lctr32_done |
| cmp $len,#1 |
| mov $step,#16 |
| cclr $step,eq |
| |
| .Lctr32_tail: |
| aese $dat0,q8 |
| aesmc $dat0,$dat0 |
| aese $dat1,q8 |
| aesmc $dat1,$dat1 |
| vld1.32 {q8},[$key_],#16 |
| subs $cnt,$cnt,#2 |
| aese $dat0,q9 |
| aesmc $dat0,$dat0 |
| aese $dat1,q9 |
| aesmc $dat1,$dat1 |
| vld1.32 {q9},[$key_],#16 |
| b.gt .Lctr32_tail |
| |
| aese $dat0,q8 |
| aesmc $dat0,$dat0 |
| aese $dat1,q8 |
| aesmc $dat1,$dat1 |
| aese $dat0,q9 |
| aesmc $dat0,$dat0 |
| aese $dat1,q9 |
| aesmc $dat1,$dat1 |
| vld1.8 {$in0},[$inp],$step |
| aese $dat0,q12 |
| aesmc $dat0,$dat0 |
| aese $dat1,q12 |
| aesmc $dat1,$dat1 |
| vld1.8 {$in1},[$inp] |
| aese $dat0,q13 |
| aesmc $dat0,$dat0 |
| aese $dat1,q13 |
| aesmc $dat1,$dat1 |
| veor $in0,$in0,$rndlast |
| aese $dat0,q14 |
| aesmc $dat0,$dat0 |
| aese $dat1,q14 |
| aesmc $dat1,$dat1 |
| veor $in1,$in1,$rndlast |
| aese $dat0,q15 |
| aese $dat1,q15 |
| |
| cmp $len,#1 |
| veor $in0,$in0,$dat0 |
| veor $in1,$in1,$dat1 |
| vst1.8 {$in0},[$out],#16 |
| b.eq .Lctr32_done |
| vst1.8 {$in1},[$out] |
| |
| .Lctr32_done: |
| ___ |
| $code.=<<___ if ($flavour !~ /64/); |
| vldmia sp!,{d8-d15} |
| ldmia sp!,{r4-r10,pc} |
| ___ |
| $code.=<<___ if ($flavour =~ /64/); |
| ldr x29,[sp],#16 |
| ret |
| ___ |
| $code.=<<___; |
| .size ${prefix}_ctr32_encrypt_blocks,.-${prefix}_ctr32_encrypt_blocks |
| ___ |
| }}} |
| $code.=<<___; |
| #endif |
| ___ |
| ######################################## |
| if ($flavour =~ /64/) { ######## 64-bit code |
| my %opcode = ( |
| "aesd" => 0x4e285800, "aese" => 0x4e284800, |
| "aesimc"=> 0x4e287800, "aesmc" => 0x4e286800 ); |
| |
| local *unaes = sub { |
| my ($mnemonic,$arg)=@_; |
| |
| $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o && |
| sprintf ".inst\t0x%08x\t//%s %s", |
| $opcode{$mnemonic}|$1|($2<<5), |
| $mnemonic,$arg; |
| }; |
| |
| foreach(split("\n",$code)) { |
| s/\`([^\`]*)\`/eval($1)/geo; |
| |
| s/\bq([0-9]+)\b/"v".($1<8?$1:$1+8).".16b"/geo; # old->new registers |
| s/@\s/\/\//o; # old->new style commentary |
| |
| #s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo or |
| s/cclr\s+([wx])([^,]+),\s*([a-z]+)/csel $1$2,$1zr,$1$2,$3/o or |
| s/mov\.([a-z]+)\s+([wx][0-9]+),\s*([wx][0-9]+)/csel $2,$3,$2,$1/o or |
| s/vmov\.i8/movi/o or # fix up legacy mnemonics |
| s/vext\.8/ext/o or |
| s/vrev32\.8/rev32/o or |
| s/vtst\.8/cmtst/o or |
| s/vshr/ushr/o or |
| s/^(\s+)v/$1/o or # strip off v prefix |
| s/\bbx\s+lr\b/ret/o; |
| |
| # fix up remainig legacy suffixes |
| s/\.[ui]?8//o; |
| m/\],#8/o and s/\.16b/\.8b/go; |
| s/\.[ui]?32//o and s/\.16b/\.4s/go; |
| s/\.[ui]?64//o and s/\.16b/\.2d/go; |
| s/\.[42]([sd])\[([0-3])\]/\.$1\[$2\]/o; |
| |
| print $_,"\n"; |
| } |
| } else { ######## 32-bit code |
| my %opcode = ( |
| "aesd" => 0xf3b00340, "aese" => 0xf3b00300, |
| "aesimc"=> 0xf3b003c0, "aesmc" => 0xf3b00380 ); |
| |
| local *unaes = sub { |
| my ($mnemonic,$arg)=@_; |
| |
| if ($arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o) { |
| my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19) |
| |(($2&7)<<1) |(($2&8)<<2); |
| # since ARMv7 instructions are always encoded little-endian. |
| # correct solution is to use .inst directive, but older |
| # assemblers don't implement it:-( |
| sprintf ".byte\t0x%02x,0x%02x,0x%02x,0x%02x\t@ %s %s", |
| $word&0xff,($word>>8)&0xff, |
| ($word>>16)&0xff,($word>>24)&0xff, |
| $mnemonic,$arg; |
| } |
| }; |
| |
| sub unvtbl { |
| my $arg=shift; |
| |
| $arg =~ m/q([0-9]+),\s*\{q([0-9]+)\},\s*q([0-9]+)/o && |
| sprintf "vtbl.8 d%d,{q%d},d%d\n\t". |
| "vtbl.8 d%d,{q%d},d%d", 2*$1,$2,2*$3, 2*$1+1,$2,2*$3+1; |
| } |
| |
| sub unvdup32 { |
| my $arg=shift; |
| |
| $arg =~ m/q([0-9]+),\s*q([0-9]+)\[([0-3])\]/o && |
| sprintf "vdup.32 q%d,d%d[%d]",$1,2*$2+($3>>1),$3&1; |
| } |
| |
| sub unvmov32 { |
| my $arg=shift; |
| |
| $arg =~ m/q([0-9]+)\[([0-3])\],(.*)/o && |
| sprintf "vmov.32 d%d[%d],%s",2*$1+($2>>1),$2&1,$3; |
| } |
| |
| foreach(split("\n",$code)) { |
| s/\`([^\`]*)\`/eval($1)/geo; |
| |
| s/\b[wx]([0-9]+)\b/r$1/go; # new->old registers |
| s/\bv([0-9])\.[12468]+[bsd]\b/q$1/go; # new->old registers |
| s/\/\/\s?/@ /o; # new->old style commentary |
| |
| # fix up remainig new-style suffixes |
| s/\{q([0-9]+)\},\s*\[(.+)\],#8/sprintf "{d%d},[$2]!",2*$1/eo or |
| s/\],#[0-9]+/]!/o; |
| |
| s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo or |
| s/cclr\s+([^,]+),\s*([a-z]+)/mov$2 $1,#0/o or |
| s/vtbl\.8\s+(.*)/unvtbl($1)/geo or |
| s/vdup\.32\s+(.*)/unvdup32($1)/geo or |
| s/vmov\.32\s+(.*)/unvmov32($1)/geo or |
| s/^(\s+)b\./$1b/o or |
| s/^(\s+)mov\./$1mov/o or |
| s/^(\s+)ret/$1bx\tlr/o; |
| |
| print $_,"\n"; |
| } |
| } |
| |
| close STDOUT; |
