blob: af32b3d5641699e238deec7e2c6390acbb47a9d1 [file] [log] [blame]
/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
*
* Portions of the attached software ("Contribution") are developed by
* SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
*
* The Contribution is licensed pursuant to the Eric Young open source
* license provided above.
*
* The binary polynomial arithmetic software is originally written by
* Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
* Laboratories. */
#ifndef OPENSSL_HEADER_BN_INTERNAL_H
#define OPENSSL_HEADER_BN_INTERNAL_H
#include <openssl/base.h>
#if defined(OPENSSL_X86_64) && defined(_MSC_VER)
OPENSSL_MSVC_PRAGMA(warning(push, 3))
#include <intrin.h>
OPENSSL_MSVC_PRAGMA(warning(pop))
#pragma intrinsic(__umulh, _umul128)
#endif
#include "../../internal.h"
#if defined(__cplusplus)
extern "C" {
#endif
#if defined(OPENSSL_64_BIT)
#if defined(BORINGSSL_HAS_UINT128)
// MSVC doesn't support two-word integers on 64-bit.
#define BN_ULLONG uint128_t
#if defined(BORINGSSL_CAN_DIVIDE_UINT128)
#define BN_CAN_DIVIDE_ULLONG
#endif
#endif
#define BN_BITS2 64
#define BN_BYTES 8
#define BN_BITS4 32
#define BN_MASK2 (0xffffffffffffffffUL)
#define BN_MASK2l (0xffffffffUL)
#define BN_MASK2h (0xffffffff00000000UL)
#define BN_MASK2h1 (0xffffffff80000000UL)
#define BN_MONT_CTX_N0_LIMBS 1
#define BN_DEC_CONV (10000000000000000000UL)
#define BN_DEC_NUM 19
#define TOBN(hi, lo) ((BN_ULONG)(hi) << 32 | (lo))
#elif defined(OPENSSL_32_BIT)
#define BN_ULLONG uint64_t
#define BN_CAN_DIVIDE_ULLONG
#define BN_BITS2 32
#define BN_BYTES 4
#define BN_BITS4 16
#define BN_MASK2 (0xffffffffUL)
#define BN_MASK2l (0xffffUL)
#define BN_MASK2h1 (0xffff8000UL)
#define BN_MASK2h (0xffff0000UL)
// On some 32-bit platforms, Montgomery multiplication is done using 64-bit
// arithmetic with SIMD instructions. On such platforms, |BN_MONT_CTX::n0|
// needs to be two words long. Only certain 32-bit platforms actually make use
// of n0[1] and shorter R value would suffice for the others. However,
// currently only the assembly files know which is which.
#define BN_MONT_CTX_N0_LIMBS 2
#define BN_DEC_CONV (1000000000UL)
#define BN_DEC_NUM 9
#define TOBN(hi, lo) (lo), (hi)
#else
#error "Must define either OPENSSL_32_BIT or OPENSSL_64_BIT"
#endif
#if !defined(OPENSSL_NO_ASM) && (defined(__GNUC__) || defined(__clang__))
#define BN_CAN_USE_INLINE_ASM
#endif
// |BN_mod_exp_mont_consttime| is based on the assumption that the L1 data
// cache line width of the target processor is at least the following value.
#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH 64
// The number of |BN_ULONG|s needed for the |BN_mod_exp_mont_consttime| stack-
// allocated storage buffer. The buffer is just the right size for the RSAZ
// and is about ~1KB larger than what's necessary (4480 bytes) for 1024-bit
// inputs.
#define MOD_EXP_CTIME_STORAGE_LEN \
(((320u * 3u) + (32u * 9u * 16u)) / sizeof(BN_ULONG))
#define STATIC_BIGNUM(x) \
{ \
(BN_ULONG *)(x), sizeof(x) / sizeof(BN_ULONG), \
sizeof(x) / sizeof(BN_ULONG), 0, BN_FLG_STATIC_DATA \
}
#if defined(BN_ULLONG)
#define Lw(t) ((BN_ULONG)(t))
#define Hw(t) ((BN_ULONG)((t) >> BN_BITS2))
#endif
// bn_minimal_width returns the minimal value of |bn->top| which fits the
// value of |bn|.
int bn_minimal_width(const BIGNUM *bn);
// bn_set_minimal_width sets |bn->width| to |bn_minimal_width(bn)|. If |bn| is
// zero, |bn->neg| is set to zero.
void bn_set_minimal_width(BIGNUM *bn);
// bn_wexpand ensures that |bn| has at least |words| works of space without
// altering its value. It returns one on success or zero on allocation
// failure.
int bn_wexpand(BIGNUM *bn, size_t words);
// bn_expand acts the same as |bn_wexpand|, but takes a number of bits rather
// than a number of words.
int bn_expand(BIGNUM *bn, size_t bits);
// bn_resize_words adjusts |bn->top| to be |words|. It returns one on success
// and zero on allocation error or if |bn|'s value is too large.
OPENSSL_EXPORT int bn_resize_words(BIGNUM *bn, size_t words);
// bn_select_words sets |r| to |a| if |mask| is all ones or |b| if |mask| is
// all zeros.
void bn_select_words(BN_ULONG *r, BN_ULONG mask, const BN_ULONG *a,
const BN_ULONG *b, size_t num);
// bn_set_words sets |bn| to the value encoded in the |num| words in |words|,
// least significant word first.
int bn_set_words(BIGNUM *bn, const BN_ULONG *words, size_t num);
// bn_fits_in_words returns one if |bn| may be represented in |num| words, plus
// a sign bit, and zero otherwise.
int bn_fits_in_words(const BIGNUM *bn, size_t num);
// bn_copy_words copies the value of |bn| to |out| and returns one if the value
// is representable in |num| words. Otherwise, it returns zero.
int bn_copy_words(BN_ULONG *out, size_t num, const BIGNUM *bn);
// bn_mul_add_words multiples |ap| by |w|, adds the result to |rp|, and places
// the result in |rp|. |ap| and |rp| must both be |num| words long. It returns
// the carry word of the operation. |ap| and |rp| may be equal but otherwise may
// not alias.
BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, size_t num,
BN_ULONG w);
// bn_mul_words multiples |ap| by |w| and places the result in |rp|. |ap| and
// |rp| must both be |num| words long. It returns the carry word of the
// operation. |ap| and |rp| may be equal but otherwise may not alias.
BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, size_t num, BN_ULONG w);
// bn_sqr_words sets |rp[2*i]| and |rp[2*i+1]| to |ap[i]|'s square, for all |i|
// up to |num|. |ap| is an array of |num| words and |rp| an array of |2*num|
// words. |ap| and |rp| may not alias.
//
// This gives the contribution of the |ap[i]*ap[i]| terms when squaring |ap|.
void bn_sqr_words(BN_ULONG *rp, const BN_ULONG *ap, size_t num);
// bn_add_words adds |ap| to |bp| and places the result in |rp|, each of which
// are |num| words long. It returns the carry bit, which is one if the operation
// overflowed and zero otherwise. Any pair of |ap|, |bp|, and |rp| may be equal
// to each other but otherwise may not alias.
BN_ULONG bn_add_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
size_t num);
// bn_sub_words subtracts |bp| from |ap| and places the result in |rp|. It
// returns the borrow bit, which is one if the computation underflowed and zero
// otherwise. Any pair of |ap|, |bp|, and |rp| may be equal to each other but
// otherwise may not alias.
BN_ULONG bn_sub_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
size_t num);
// bn_mul_comba4 sets |r| to the product of |a| and |b|.
void bn_mul_comba4(BN_ULONG r[8], const BN_ULONG a[4], const BN_ULONG b[4]);
// bn_mul_comba8 sets |r| to the product of |a| and |b|.
void bn_mul_comba8(BN_ULONG r[16], const BN_ULONG a[8], const BN_ULONG b[8]);
// bn_sqr_comba8 sets |r| to |a|^2.
void bn_sqr_comba8(BN_ULONG r[16], const BN_ULONG a[4]);
// bn_sqr_comba4 sets |r| to |a|^2.
void bn_sqr_comba4(BN_ULONG r[8], const BN_ULONG a[4]);
// bn_less_than_words returns one if |a| < |b| and zero otherwise, where |a|
// and |b| both are |len| words long. It runs in constant time.
int bn_less_than_words(const BN_ULONG *a, const BN_ULONG *b, size_t len);
// bn_in_range_words returns one if |min_inclusive| <= |a| < |max_exclusive|,
// where |a| and |max_exclusive| both are |len| words long. |a| and
// |max_exclusive| are treated as secret.
int bn_in_range_words(const BN_ULONG *a, BN_ULONG min_inclusive,
const BN_ULONG *max_exclusive, size_t len);
// bn_rand_range_words sets |out| to a uniformly distributed random number from
// |min_inclusive| to |max_exclusive|. Both |out| and |max_exclusive| are |len|
// words long.
//
// This function runs in time independent of the result, but |min_inclusive| and
// |max_exclusive| are public data. (Information about the range is unavoidably
// leaked by how many iterations it took to select a number.)
int bn_rand_range_words(BN_ULONG *out, BN_ULONG min_inclusive,
const BN_ULONG *max_exclusive, size_t len,
const uint8_t additional_data[32]);
// bn_range_secret_range behaves like |BN_rand_range_ex|, but treats
// |max_exclusive| as secret. Because of this constraint, the distribution of
// values returned is more complex.
//
// Rather than repeatedly generating values until one is in range, which would
// leak information, it generates one value. If the value is in range, it sets
// |*out_is_uniform| to one. Otherwise, it sets |*out_is_uniform| to zero,
// fixing up the value to force it in range.
//
// The subset of calls to |bn_rand_secret_range| which set |*out_is_uniform| to
// one are uniformly distributed in the target range. Calls overall are not.
// This function is intended for use in situations where the extra values are
// still usable and where the number of iterations needed to reach the target
// number of uniform outputs may be blinded for negligible probabilities of
// timing leaks.
//
// Although this function treats |max_exclusive| as secret, it treats the number
// of bits in |max_exclusive| as public.
int bn_rand_secret_range(BIGNUM *r, int *out_is_uniform, BN_ULONG min_inclusive,
const BIGNUM *max_exclusive);
#if !defined(OPENSSL_NO_ASM) && \
(defined(OPENSSL_X86) || defined(OPENSSL_X86_64) || \
defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64))
#define OPENSSL_BN_ASM_MONT
// bn_mul_mont writes |ap| * |bp| mod |np| to |rp|, each |num| words
// long. Inputs and outputs are in Montgomery form. |n0| is a pointer to the
// corresponding field in |BN_MONT_CTX|. It returns one if |bn_mul_mont| handles
// inputs of this size and zero otherwise.
//
// TODO(davidben): The x86_64 implementation expects a 32-bit input and masks
// off upper bits. The aarch64 implementation expects a 64-bit input and does
// not. |size_t| is the safer option but not strictly correct for x86_64. But
// this function implicitly already has a bound on the size of |num| because it
// internally creates |num|-sized stack allocation.
//
// See also discussion in |ToWord| in abi_test.h for notes on smaller-than-word
// inputs.
int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
const BN_ULONG *np, const BN_ULONG *n0, size_t num);
#endif
#if !defined(OPENSSL_NO_ASM) && defined(OPENSSL_X86_64)
#define OPENSSL_BN_ASM_MONT5
// bn_mul_mont_gather5 multiples loads index |power| of |table|, multiplies it
// by |ap| modulo |np|, and stores the result in |rp|. The values are |num|
// words long and represented in Montgomery form. |n0| is a pointer to the
// corresponding field in |BN_MONT_CTX|.
void bn_mul_mont_gather5(BN_ULONG *rp, const BN_ULONG *ap,
const BN_ULONG *table, const BN_ULONG *np,
const BN_ULONG *n0, int num, int power);
// bn_scatter5 stores |inp| to index |power| of |table|. |inp| and each entry of
// |table| are |num| words long. |power| must be less than 32. |table| must be
// 32*|num| words long.
void bn_scatter5(const BN_ULONG *inp, size_t num, BN_ULONG *table,
size_t power);
// bn_gather5 loads index |power| of |table| and stores it in |out|. |out| and
// each entry of |table| are |num| words long. |power| must be less than 32.
void bn_gather5(BN_ULONG *out, size_t num, BN_ULONG *table, size_t power);
// bn_power5 squares |ap| five times and multiplies it by the value stored at
// index |power| of |table|, modulo |np|. It stores the result in |rp|. The
// values are |num| words long and represented in Montgomery form. |n0| is a
// pointer to the corresponding field in |BN_MONT_CTX|. |num| must be divisible
// by 8.
void bn_power5(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *table,
const BN_ULONG *np, const BN_ULONG *n0, int num, int power);
// bn_from_montgomery converts |ap| from Montgomery form modulo |np| and writes
// the result in |rp|, each of which is |num| words long. It returns one on
// success and zero if it cannot handle inputs of length |num|. |n0| is a
// pointer to the corresponding field in |BN_MONT_CTX|.
int bn_from_montgomery(BN_ULONG *rp, const BN_ULONG *ap,
const BN_ULONG *not_used, const BN_ULONG *np,
const BN_ULONG *n0, int num);
#endif // !OPENSSL_NO_ASM && OPENSSL_X86_64
uint64_t bn_mont_n0(const BIGNUM *n);
// bn_mod_exp_base_2_consttime calculates r = 2**p (mod n). |p| must be larger
// than log_2(n); i.e. 2**p must be larger than |n|. |n| must be positive and
// odd. |p| and the bit width of |n| are assumed public, but |n| is otherwise
// treated as secret.
int bn_mod_exp_base_2_consttime(BIGNUM *r, unsigned p, const BIGNUM *n,
BN_CTX *ctx);
#if defined(OPENSSL_X86_64) && defined(_MSC_VER)
#define BN_UMULT_LOHI(low, high, a, b) ((low) = _umul128((a), (b), &(high)))
#endif
#if !defined(BN_ULLONG) && !defined(BN_UMULT_LOHI)
#error "Either BN_ULLONG or BN_UMULT_LOHI must be defined on every platform."
#endif
// bn_jacobi returns the Jacobi symbol of |a| and |b| (which is -1, 0 or 1), or
// -2 on error.
int bn_jacobi(const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
// bn_is_bit_set_words returns one if bit |bit| is set in |a| and zero
// otherwise.
int bn_is_bit_set_words(const BN_ULONG *a, size_t num, unsigned bit);
// bn_one_to_montgomery sets |r| to one in Montgomery form. It returns one on
// success and zero on error. This function treats the bit width of the modulus
// as public.
int bn_one_to_montgomery(BIGNUM *r, const BN_MONT_CTX *mont, BN_CTX *ctx);
// bn_less_than_montgomery_R returns one if |bn| is less than the Montgomery R
// value for |mont| and zero otherwise.
int bn_less_than_montgomery_R(const BIGNUM *bn, const BN_MONT_CTX *mont);
// bn_mod_u16_consttime returns |bn| mod |d|, ignoring |bn|'s sign bit. It runs
// in time independent of the value of |bn|, but it treats |d| as public.
OPENSSL_EXPORT uint16_t bn_mod_u16_consttime(const BIGNUM *bn, uint16_t d);
// bn_odd_number_is_obviously_composite returns one if |bn| is divisible by one
// of the first several odd primes and zero otherwise.
int bn_odd_number_is_obviously_composite(const BIGNUM *bn);
// A BN_MILLER_RABIN stores state common to each Miller-Rabin iteration. It is
// initialized within an existing |BN_CTX| scope and may not be used after
// that scope is released with |BN_CTX_end|. Field names match those in FIPS
// 186-4, section C.3.1.
typedef struct {
// w1 is w-1.
BIGNUM *w1;
// m is (w-1)/2^a.
BIGNUM *m;
// one_mont is 1 (mod w) in Montgomery form.
BIGNUM *one_mont;
// w1_mont is w-1 (mod w) in Montgomery form.
BIGNUM *w1_mont;
// w_bits is BN_num_bits(w).
int w_bits;
// a is the largest integer such that 2^a divides w-1.
int a;
} BN_MILLER_RABIN;
// bn_miller_rabin_init initializes |miller_rabin| for testing if |mont->N| is
// prime. It returns one on success and zero on error.
OPENSSL_EXPORT int bn_miller_rabin_init(BN_MILLER_RABIN *miller_rabin,
const BN_MONT_CTX *mont, BN_CTX *ctx);
// bn_miller_rabin_iteration performs one Miller-Rabin iteration, checking if
// |b| is a composite witness for |mont->N|. |miller_rabin| must have been
// initialized with |bn_miller_rabin_setup|. On success, it returns one and sets
// |*out_is_possibly_prime| to one if |mont->N| may still be prime or zero if
// |b| shows it is composite. On allocation or internal failure, it returns
// zero.
OPENSSL_EXPORT int bn_miller_rabin_iteration(
const BN_MILLER_RABIN *miller_rabin, int *out_is_possibly_prime,
const BIGNUM *b, const BN_MONT_CTX *mont, BN_CTX *ctx);
// bn_rshift1_words sets |r| to |a| >> 1, where both arrays are |num| bits wide.
void bn_rshift1_words(BN_ULONG *r, const BN_ULONG *a, size_t num);
// bn_rshift_words sets |r| to |a| >> |shift|, where both arrays are |num| bits
// wide.
void bn_rshift_words(BN_ULONG *r, const BN_ULONG *a, unsigned shift,
size_t num);
// bn_rshift_secret_shift behaves like |BN_rshift| but runs in time independent
// of both |a| and |n|.
OPENSSL_EXPORT int bn_rshift_secret_shift(BIGNUM *r, const BIGNUM *a,
unsigned n, BN_CTX *ctx);
// bn_reduce_once sets |r| to |a| mod |m| where 0 <= |a| < 2*|m|. It returns
// zero if |a| < |m| and a mask of all ones if |a| >= |m|. Each array is |num|
// words long, but |a| has an additional word specified by |carry|. |carry| must
// be zero or one, as implied by the bounds on |a|.
//
// |r|, |a|, and |m| may not alias. Use |bn_reduce_once_in_place| if |r| and |a|
// must alias.
BN_ULONG bn_reduce_once(BN_ULONG *r, const BN_ULONG *a, BN_ULONG carry,
const BN_ULONG *m, size_t num);
// bn_reduce_once_in_place behaves like |bn_reduce_once| but acts in-place on
// |r|, using |tmp| as scratch space. |r|, |tmp|, and |m| may not alias.
BN_ULONG bn_reduce_once_in_place(BN_ULONG *r, BN_ULONG carry, const BN_ULONG *m,
BN_ULONG *tmp, size_t num);
// Constant-time non-modular arithmetic.
//
// The following functions implement non-modular arithmetic in constant-time
// and pessimally set |r->width| to the largest possible word size.
//
// Note this means that, e.g., repeatedly multiplying by one will cause widths
// to increase without bound. The corresponding public API functions minimize
// their outputs to avoid regressing calculator consumers.
// bn_uadd_consttime behaves like |BN_uadd|, but it pessimally sets
// |r->width| = |a->width| + |b->width| + 1.
int bn_uadd_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
// bn_usub_consttime behaves like |BN_usub|, but it pessimally sets
// |r->width| = |a->width|.
int bn_usub_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
// bn_abs_sub_consttime sets |r| to the absolute value of |a| - |b|, treating
// both inputs as secret. It returns one on success and zero on error.
OPENSSL_EXPORT int bn_abs_sub_consttime(BIGNUM *r, const BIGNUM *a,
const BIGNUM *b, BN_CTX *ctx);
// bn_mul_consttime behaves like |BN_mul|, but it rejects negative inputs and
// pessimally sets |r->width| to |a->width| + |b->width|, to avoid leaking
// information about |a| and |b|.
int bn_mul_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
// bn_sqrt_consttime behaves like |BN_sqrt|, but it pessimally sets |r->width|
// to 2*|a->width|, to avoid leaking information about |a| and |b|.
int bn_sqr_consttime(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx);
// bn_div_consttime behaves like |BN_div|, but it rejects negative inputs and
// treats both inputs, including their magnitudes, as secret. It is, as a
// result, much slower than |BN_div| and should only be used for rare operations
// where Montgomery reduction is not available.
//
// Note that |quotient->width| will be set pessimally to |numerator->width|.
OPENSSL_EXPORT int bn_div_consttime(BIGNUM *quotient, BIGNUM *remainder,
const BIGNUM *numerator,
const BIGNUM *divisor, BN_CTX *ctx);
// bn_is_relatively_prime checks whether GCD(|x|, |y|) is one. On success, it
// returns one and sets |*out_relatively_prime| to one if the GCD was one and
// zero otherwise. On error, it returns zero.
OPENSSL_EXPORT int bn_is_relatively_prime(int *out_relatively_prime,
const BIGNUM *x, const BIGNUM *y,
BN_CTX *ctx);
// bn_lcm_consttime sets |r| to LCM(|a|, |b|). It returns one and success and
// zero on error. |a| and |b| are both treated as secret.
OPENSSL_EXPORT int bn_lcm_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
BN_CTX *ctx);
// Constant-time modular arithmetic.
//
// The following functions implement basic constant-time modular arithmetic.
// bn_mod_add_words sets |r| to |a| + |b| (mod |m|), using |tmp| as scratch
// space. Each array is |num| words long. |a| and |b| must be < |m|. Any pair of
// |r|, |a|, and |b| may alias.
void bn_mod_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
const BN_ULONG *m, BN_ULONG *tmp, size_t num);
// bn_mod_add_consttime acts like |BN_mod_add_quick| but takes a |BN_CTX|.
int bn_mod_add_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
const BIGNUM *m, BN_CTX *ctx);
// bn_mod_sub_words sets |r| to |a| - |b| (mod |m|), using |tmp| as scratch
// space. Each array is |num| words long. |a| and |b| must be < |m|. Any pair of
// |r|, |a|, and |b| may alias.
void bn_mod_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
const BN_ULONG *m, BN_ULONG *tmp, size_t num);
// bn_mod_sub_consttime acts like |BN_mod_sub_quick| but takes a |BN_CTX|.
int bn_mod_sub_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
const BIGNUM *m, BN_CTX *ctx);
// bn_mod_lshift1_consttime acts like |BN_mod_lshift1_quick| but takes a
// |BN_CTX|.
int bn_mod_lshift1_consttime(BIGNUM *r, const BIGNUM *a, const BIGNUM *m,
BN_CTX *ctx);
// bn_mod_lshift_consttime acts like |BN_mod_lshift_quick| but takes a |BN_CTX|.
int bn_mod_lshift_consttime(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m,
BN_CTX *ctx);
// bn_mod_inverse_consttime sets |r| to |a|^-1, mod |n|. |a| must be non-
// negative and less than |n|. It returns one on success and zero on error. On
// failure, if the failure was caused by |a| having no inverse mod |n| then
// |*out_no_inverse| will be set to one; otherwise it will be set to zero.
//
// This function treats both |a| and |n| as secret, provided they are both non-
// zero and the inverse exists. It should only be used for even moduli where
// none of the less general implementations are applicable.
OPENSSL_EXPORT int bn_mod_inverse_consttime(BIGNUM *r, int *out_no_inverse,
const BIGNUM *a, const BIGNUM *n,
BN_CTX *ctx);
// bn_mod_inverse_prime sets |out| to the modular inverse of |a| modulo |p|,
// computed with Fermat's Little Theorem. It returns one on success and zero on
// error. If |mont_p| is NULL, one will be computed temporarily.
int bn_mod_inverse_prime(BIGNUM *out, const BIGNUM *a, const BIGNUM *p,
BN_CTX *ctx, const BN_MONT_CTX *mont_p);
// bn_mod_inverse_secret_prime behaves like |bn_mod_inverse_prime| but uses
// |BN_mod_exp_mont_consttime| instead of |BN_mod_exp_mont| in hopes of
// protecting the exponent.
int bn_mod_inverse_secret_prime(BIGNUM *out, const BIGNUM *a, const BIGNUM *p,
BN_CTX *ctx, const BN_MONT_CTX *mont_p);
// Low-level operations for small numbers.
//
// The following functions implement algorithms suitable for use with scalars
// and field elements in elliptic curves. They rely on the number being small
// both to stack-allocate various temporaries and because they do not implement
// optimizations useful for the larger values used in RSA.
// BN_SMALL_MAX_WORDS is the largest size input these functions handle. This
// limit allows temporaries to be more easily stack-allocated. This limit is set
// to accommodate P-521.
#if defined(OPENSSL_32_BIT)
#define BN_SMALL_MAX_WORDS 17
#else
#define BN_SMALL_MAX_WORDS 9
#endif
// bn_mul_small sets |r| to |a|*|b|. |num_r| must be |num_a| + |num_b|. |r| may
// not alias with |a| or |b|.
void bn_mul_small(BN_ULONG *r, size_t num_r, const BN_ULONG *a, size_t num_a,
const BN_ULONG *b, size_t num_b);
// bn_sqr_small sets |r| to |a|^2. |num_a| must be at most |BN_SMALL_MAX_WORDS|.
// |num_r| must be |num_a|*2. |r| and |a| may not alias.
void bn_sqr_small(BN_ULONG *r, size_t num_r, const BN_ULONG *a, size_t num_a);
// In the following functions, the modulus must be at most |BN_SMALL_MAX_WORDS|
// words long.
// bn_to_montgomery_small sets |r| to |a| translated to the Montgomery domain.
// |r| and |a| are |num| words long, which must be |mont->N.width|. |a| must be
// fully reduced and may alias |r|.
void bn_to_montgomery_small(BN_ULONG *r, const BN_ULONG *a, size_t num,
const BN_MONT_CTX *mont);
// bn_from_montgomery_small sets |r| to |a| translated out of the Montgomery
// domain. |r| and |a| are |num_r| and |num_a| words long, respectively. |num_r|
// must be |mont->N.width|. |a| must be at most |mont->N|^2 and may alias |r|.
//
// Unlike most of these functions, only |num_r| is bounded by
// |BN_SMALL_MAX_WORDS|. |num_a| may exceed it, but must be at most 2 * |num_r|.
void bn_from_montgomery_small(BN_ULONG *r, size_t num_r, const BN_ULONG *a,
size_t num_a, const BN_MONT_CTX *mont);
// bn_mod_mul_montgomery_small sets |r| to |a| * |b| mod |mont->N|. Both inputs
// and outputs are in the Montgomery domain. Each array is |num| words long,
// which must be |mont->N.width|. Any two of |r|, |a|, and |b| may alias. |a|
// and |b| must be reduced on input.
void bn_mod_mul_montgomery_small(BN_ULONG *r, const BN_ULONG *a,
const BN_ULONG *b, size_t num,
const BN_MONT_CTX *mont);
// bn_mod_exp_mont_small sets |r| to |a|^|p| mod |mont->N|. It returns one on
// success and zero on programmer or internal error. Both inputs and outputs are
// in the Montgomery domain. |r| and |a| are |num| words long, which must be
// |mont->N.width| and at most |BN_SMALL_MAX_WORDS|. |a| must be fully-reduced.
// This function runs in time independent of |a|, but |p| and |mont->N| are
// public values. |a| must be fully-reduced and may alias with |r|.
//
// Note this function differs from |BN_mod_exp_mont| which uses Montgomery
// reduction but takes input and output outside the Montgomery domain. Combine
// this function with |bn_from_montgomery_small| and |bn_to_montgomery_small|
// if necessary.
void bn_mod_exp_mont_small(BN_ULONG *r, const BN_ULONG *a, size_t num,
const BN_ULONG *p, size_t num_p,
const BN_MONT_CTX *mont);
// bn_mod_inverse0_prime_mont_small sets |r| to |a|^-1 mod |mont->N|. If |a| is
// zero, |r| is set to zero. |mont->N| must be a prime. |r| and |a| are |num|
// words long, which must be |mont->N.width| and at most |BN_SMALL_MAX_WORDS|.
// |a| must be fully-reduced and may alias |r|. This function runs in time
// independent of |a|, but |mont->N| is a public value.
void bn_mod_inverse0_prime_mont_small(BN_ULONG *r, const BN_ULONG *a,
size_t num, const BN_MONT_CTX *mont);
#if defined(__cplusplus)
} // extern C
#endif
#endif // OPENSSL_HEADER_BN_INTERNAL_H