| // Copyright 2005-2016 The OpenSSL Project Authors. All Rights Reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include <openssl/ssl.h> | |
| #include <assert.h> | |
| #include <limits.h> | |
| #include <stdint.h> | |
| #include <string.h> | |
| #include <algorithm> | |
| #include <openssl/err.h> | |
| #include <openssl/mem.h> | |
| #include <openssl/nid.h> | |
| #include "../crypto/internal.h" | |
| #include "internal.h" | |
| BSSL_NAMESPACE_BEGIN | |
| namespace { | |
| inline uint64_t ToMicros(const OPENSSL_timeval& now) { | |
| uint64_t us = now.tv_sec; | |
| us *= 1000000; | |
| us += now.tv_usec; | |
| return us; | |
| } | |
| } // namespace | |
| DTLS1_STATE::DTLS1_STATE() | |
| : has_change_cipher_spec(false), | |
| outgoing_messages_complete(false), | |
| flight_has_reply(false), | |
| handshake_write_overflow(false), | |
| handshake_read_overflow(false), | |
| sending_flight(false), | |
| sending_ack(false), | |
| pending_flush(false), | |
| queued_key_update(QueuedKeyUpdate::kNone) {} | |
| DTLS1_STATE::~DTLS1_STATE() {} | |
| bool DTLS1_STATE::Init() { | |
| // Set up the initial epochs. | |
| read_epoch.aead = SSLAEADContext::CreateNullCipher(); | |
| write_epoch.aead = SSLAEADContext::CreateNullCipher(); | |
| if (read_epoch.aead == nullptr || write_epoch.aead == nullptr) { | |
| return false; | |
| } | |
| return true; | |
| } | |
| bool dtls1_new(SSLImpl *ssl) { | |
| if (!tls_new(ssl)) { | |
| return false; | |
| } | |
| UniquePtr<DTLS1_STATE> d1 = MakeUnique<DTLS1_STATE>(); | |
| if (!d1 || !d1->Init()) { | |
| tls_free(ssl); | |
| return false; | |
| } | |
| ssl->d1 = d1.release(); | |
| return true; | |
| } | |
| void dtls1_free(SSLImpl *ssl) { | |
| tls_free(ssl); | |
| if (ssl == nullptr) { | |
| return; | |
| } | |
| Delete(ssl->d1); | |
| ssl->d1 = nullptr; | |
| } | |
| void DTLSTimer::StartMicroseconds(OPENSSL_timeval now, uint64_t microseconds) { | |
| start_time_ = ToMicros(now); | |
| duration_ = microseconds; | |
| } | |
| void DTLSTimer::Stop() { duration_ = kNever; } | |
| bool DTLSTimer::IsExpired(OPENSSL_timeval now) const { | |
| return MicrosecondsRemaining(now) == 0; | |
| } | |
| bool DTLSTimer::IsSet() const { | |
| return duration_ != kNever; | |
| } | |
| uint64_t DTLSTimer::MicrosecondsRemaining(OPENSSL_timeval now) const { | |
| if (!IsSet()) { | |
| return kNever; | |
| } | |
| uint64_t now_us = ToMicros(now); | |
| uint64_t expire_us = start_time_ + duration_; | |
| if (now_us > expire_us) { | |
| return 0; | |
| } | |
| uint64_t remain_us = expire_us - now_us; | |
| // If remaining time is less than 15 ms, return 0 to prevent issues because of | |
| // small divergences with socket timeouts. | |
| if (remain_us < 15000) { | |
| return 0; | |
| } | |
| return remain_us; | |
| } | |
| void dtls1_stop_timer(SSLImpl *ssl) { | |
| ssl->d1->num_timeouts = 0; | |
| ssl->d1->retransmit_timer.Stop(); | |
| ssl->d1->timeout_duration_ms = ssl->initial_timeout_duration_ms; | |
| } | |
| BSSL_NAMESPACE_END | |
| using namespace bssl; | |
| void DTLSv1_set_initial_timeout_duration(SSL *ssl, uint32_t duration_ms) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!SSL_is_dtls(ssl_impl)) { | |
| return; | |
| } | |
| // Modify the initial value for next flight. | |
| ssl_impl->initial_timeout_duration_ms = duration_ms; | |
| // Retransmit timer increase by factor of 2 at each timeout. | |
| uint32_t timeout_duration_ms = duration_ms << ssl_impl->d1->num_timeouts; | |
| if (timeout_duration_ms < duration_ms) { | |
| timeout_duration_ms = uint32_t{60000}; | |
| } else { | |
| timeout_duration_ms = std::min(timeout_duration_ms, uint32_t{60000}); | |
| } | |
| // Modify the value used for next timeout. | |
| ssl_impl->d1->timeout_duration_ms = timeout_duration_ms; | |
| // Modify retransmit timer. | |
| if (ssl_impl->d1->retransmit_timer.IsSet()) { | |
| ssl_impl->d1->retransmit_timer.UpdateDuration( | |
| uint64_t{timeout_duration_ms} * 1000); | |
| } | |
| // Modify ack timer. | |
| if (ssl_impl->d1->ack_timer.IsSet()) { | |
| ssl_impl->d1->ack_timer.UpdateDuration(uint64_t{timeout_duration_ms} * | |
| 1000 / 4); | |
| } | |
| } | |
| int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!SSL_is_dtls(ssl_impl)) { | |
| return 0; | |
| } | |
| OPENSSL_timeval now = ssl_ctx_get_current_time(ssl_impl->ctx.get()); | |
| uint64_t remaining_usec = | |
| ssl_impl->d1->retransmit_timer.MicrosecondsRemaining(now); | |
| remaining_usec = std::min(remaining_usec, | |
| ssl_impl->d1->ack_timer.MicrosecondsRemaining(now)); | |
| if (remaining_usec == DTLSTimer::kNever) { | |
| return 0; // No timeout is set. | |
| } | |
| uint64_t remaining_sec = remaining_usec / 1000000; | |
| remaining_usec %= 1000000; | |
| // `timeval` uses `time_t`, which may be 32-bit. | |
| const auto kTvSecMax = std::numeric_limits<decltype(out->tv_sec)>::max(); | |
| if (remaining_sec > static_cast<uint64_t>(kTvSecMax)) { | |
| out->tv_sec = kTvSecMax; // Saturate the output. | |
| out->tv_usec = 999999; | |
| } else { | |
| out->tv_sec = static_cast<decltype(out->tv_sec)>(remaining_sec); | |
| } | |
| out->tv_usec = remaining_usec; | |
| return 1; | |
| } | |
| int DTLSv1_handle_timeout(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_reset_error_state(ssl_impl); | |
| if (!SSL_is_dtls(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return -1; | |
| } | |
| if (!ssl_impl->d1->ack_timer.IsSet() && | |
| !ssl_impl->d1->retransmit_timer.IsSet()) { | |
| // No timers are running. Don't bother querying the clock. | |
| return 0; | |
| } | |
| OPENSSL_timeval now = ssl_ctx_get_current_time(ssl_impl->ctx.get()); | |
| bool any_timer_expired = false; | |
| if (ssl_impl->d1->ack_timer.IsExpired(now)) { | |
| any_timer_expired = true; | |
| ssl_impl->d1->sending_ack = true; | |
| ssl_impl->d1->ack_timer.Stop(); | |
| } | |
| if (ssl_impl->d1->retransmit_timer.IsExpired(now)) { | |
| any_timer_expired = true; | |
| ssl_impl->d1->sending_flight = true; | |
| ssl_impl->d1->retransmit_timer.Stop(); | |
| ssl_impl->d1->num_timeouts++; | |
| // Reduce MTU after 2 unsuccessful retransmissions. | |
| if (ssl_impl->d1->num_timeouts > DTLS1_MTU_TIMEOUTS && | |
| !(SSL_get_options(ssl_impl) & SSL_OP_NO_QUERY_MTU)) { | |
| long mtu = BIO_ctrl(ssl_impl->wbio.get(), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, | |
| 0, nullptr); | |
| if (mtu >= 0 && mtu <= (1 << 30) && (unsigned)mtu >= dtls1_min_mtu()) { | |
| ssl_impl->d1->mtu = (unsigned)mtu; | |
| } | |
| } | |
| } | |
| if (!any_timer_expired) { | |
| return 0; | |
| } | |
| return dtls1_flush(ssl_impl); | |
| } |