| /* ssl/ssl.h */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. |
| * ECC cipher suite support in OpenSSL originally developed by |
| * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. |
| */ |
| /* ==================================================================== |
| * Copyright 2005 Nokia. All rights reserved. |
| * |
| * The portions of the attached software ("Contribution") is developed by |
| * Nokia Corporation and is licensed pursuant to the OpenSSL open source |
| * license. |
| * |
| * The Contribution, originally written by Mika Kousa and Pasi Eronen of |
| * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites |
| * support (see RFC 4279) to OpenSSL. |
| * |
| * No patent licenses or other rights except those expressly stated in |
| * the OpenSSL open source license shall be deemed granted or received |
| * expressly, by implication, estoppel, or otherwise. |
| * |
| * No assurances are provided by Nokia that the Contribution does not |
| * infringe the patent or other intellectual property rights of any third |
| * party or that the license provides you with all the necessary rights |
| * to make use of the Contribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN |
| * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA |
| * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY |
| * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR |
| * OTHERWISE. |
| */ |
| |
| #ifndef HEADER_SSL_H |
| #define HEADER_SSL_H |
| |
| #include <openssl/base.h> |
| |
| #include <openssl/bio.h> |
| #include <openssl/buf.h> |
| #include <openssl/hmac.h> |
| #include <openssl/lhash.h> |
| #include <openssl/pem.h> |
| #include <openssl/x509.h> |
| |
| /* Some code expected to get the threading functions by including ssl.h. */ |
| #include <openssl/thread.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| /* SSLeay version number for ASN.1 encoding of the session information */ |
| /* Version 0 - initial version |
| * Version 1 - added the optional peer certificate |
| */ |
| #define SSL_SESSION_ASN1_VERSION 0x0001 |
| |
| /* text strings for the ciphers */ |
| #define SSL_TXT_NULL_WITH_MD5 SSL2_TXT_NULL_WITH_MD5 |
| #define SSL_TXT_RC4_128_WITH_MD5 SSL2_TXT_RC4_128_WITH_MD5 |
| #define SSL_TXT_RC4_128_EXPORT40_WITH_MD5 SSL2_TXT_RC4_128_EXPORT40_WITH_MD5 |
| #define SSL_TXT_RC2_128_CBC_WITH_MD5 SSL2_TXT_RC2_128_CBC_WITH_MD5 |
| #define SSL_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 SSL2_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 |
| #define SSL_TXT_IDEA_128_CBC_WITH_MD5 SSL2_TXT_IDEA_128_CBC_WITH_MD5 |
| #define SSL_TXT_DES_64_CBC_WITH_MD5 SSL2_TXT_DES_64_CBC_WITH_MD5 |
| #define SSL_TXT_DES_64_CBC_WITH_SHA SSL2_TXT_DES_64_CBC_WITH_SHA |
| #define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5 |
| #define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA |
| |
| /* VRS Additional Kerberos5 entries |
| */ |
| #define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA |
| #define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA |
| #define SSL_TXT_KRB5_RC4_128_SHA SSL3_TXT_KRB5_RC4_128_SHA |
| #define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA |
| #define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 |
| #define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 |
| #define SSL_TXT_KRB5_RC4_128_MD5 SSL3_TXT_KRB5_RC4_128_MD5 |
| #define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5 |
| |
| #define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA |
| #define SSL_TXT_KRB5_RC2_40_CBC_SHA SSL3_TXT_KRB5_RC2_40_CBC_SHA |
| #define SSL_TXT_KRB5_RC4_40_SHA SSL3_TXT_KRB5_RC4_40_SHA |
| #define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 |
| #define SSL_TXT_KRB5_RC2_40_CBC_MD5 SSL3_TXT_KRB5_RC2_40_CBC_MD5 |
| #define SSL_TXT_KRB5_RC4_40_MD5 SSL3_TXT_KRB5_RC4_40_MD5 |
| |
| #define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA |
| #define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 |
| #define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA |
| #define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 |
| #define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA |
| #define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 |
| #define SSL_MAX_KRB5_PRINCIPAL_LENGTH 256 |
| |
| #define SSL_MAX_SSL_SESSION_ID_LENGTH 32 |
| #define SSL_MAX_SID_CTX_LENGTH 32 |
| |
| #define SSL_MIN_RSA_MODULUS_LENGTH_IN_BYTES (512/8) |
| #define SSL_MAX_KEY_ARG_LENGTH 8 |
| #define SSL_MAX_MASTER_KEY_LENGTH 48 |
| |
| |
| /* These are used to specify which ciphers to use and not to use */ |
| |
| #define SSL_TXT_EXP40 "EXPORT40" |
| #define SSL_TXT_EXP56 "EXPORT56" |
| #define SSL_TXT_LOW "LOW" |
| #define SSL_TXT_MEDIUM "MEDIUM" |
| #define SSL_TXT_HIGH "HIGH" |
| #define SSL_TXT_FIPS "FIPS" |
| |
| #define SSL_TXT_kFZA "kFZA" /* unused! */ |
| #define SSL_TXT_aFZA "aFZA" /* unused! */ |
| #define SSL_TXT_eFZA "eFZA" /* unused! */ |
| #define SSL_TXT_FZA "FZA" /* unused! */ |
| |
| #define SSL_TXT_aNULL "aNULL" |
| #define SSL_TXT_eNULL "eNULL" |
| #define SSL_TXT_NULL "NULL" |
| |
| #define SSL_TXT_kRSA "kRSA" |
| #define SSL_TXT_kDHr "kDHr" |
| #define SSL_TXT_kDHd "kDHd" |
| #define SSL_TXT_kDH "kDH" |
| #define SSL_TXT_kEDH "kEDH" |
| #define SSL_TXT_kKRB5 "kKRB5" |
| #define SSL_TXT_kECDHr "kECDHr" |
| #define SSL_TXT_kECDHe "kECDHe" |
| #define SSL_TXT_kECDH "kECDH" |
| #define SSL_TXT_kEECDH "kEECDH" |
| #define SSL_TXT_kPSK "kPSK" |
| #define SSL_TXT_kGOST "kGOST" |
| #define SSL_TXT_kSRP "kSRP" |
| |
| #define SSL_TXT_aRSA "aRSA" |
| #define SSL_TXT_aDSS "aDSS" |
| #define SSL_TXT_aDH "aDH" |
| #define SSL_TXT_aECDH "aECDH" |
| #define SSL_TXT_aKRB5 "aKRB5" |
| #define SSL_TXT_aECDSA "aECDSA" |
| #define SSL_TXT_aPSK "aPSK" |
| #define SSL_TXT_aGOST94 "aGOST94" |
| #define SSL_TXT_aGOST01 "aGOST01" |
| #define SSL_TXT_aGOST "aGOST" |
| |
| #define SSL_TXT_DSS "DSS" |
| #define SSL_TXT_DH "DH" |
| #define SSL_TXT_EDH "EDH" /* same as "kEDH:-ADH" */ |
| #define SSL_TXT_ADH "ADH" |
| #define SSL_TXT_RSA "RSA" |
| #define SSL_TXT_ECDH "ECDH" |
| #define SSL_TXT_EECDH "EECDH" /* same as "kEECDH:-AECDH" */ |
| #define SSL_TXT_AECDH "AECDH" |
| #define SSL_TXT_ECDSA "ECDSA" |
| #define SSL_TXT_KRB5 "KRB5" |
| #define SSL_TXT_PSK "PSK" |
| #define SSL_TXT_SRP "SRP" |
| |
| #define SSL_TXT_DES "DES" |
| #define SSL_TXT_3DES "3DES" |
| #define SSL_TXT_RC4 "RC4" |
| #define SSL_TXT_RC2 "RC2" |
| #define SSL_TXT_IDEA "IDEA" |
| #define SSL_TXT_SEED "SEED" |
| #define SSL_TXT_AES128 "AES128" |
| #define SSL_TXT_AES256 "AES256" |
| #define SSL_TXT_AES "AES" |
| #define SSL_TXT_AES_GCM "AESGCM" |
| #define SSL_TXT_CAMELLIA128 "CAMELLIA128" |
| #define SSL_TXT_CAMELLIA256 "CAMELLIA256" |
| #define SSL_TXT_CAMELLIA "CAMELLIA" |
| #define SSL_TXT_CHACHA20 "CHACHA20" |
| |
| #define SSL_TXT_MD5 "MD5" |
| #define SSL_TXT_SHA1 "SHA1" |
| #define SSL_TXT_SHA "SHA" /* same as "SHA1" */ |
| #define SSL_TXT_GOST94 "GOST94" |
| #define SSL_TXT_GOST89MAC "GOST89MAC" |
| #define SSL_TXT_SHA256 "SHA256" |
| #define SSL_TXT_SHA384 "SHA384" |
| |
| #define SSL_TXT_SSLV2 "SSLv2" |
| #define SSL_TXT_SSLV3 "SSLv3" |
| #define SSL_TXT_TLSV1 "TLSv1" |
| #define SSL_TXT_TLSV1_1 "TLSv1.1" |
| #define SSL_TXT_TLSV1_2 "TLSv1.2" |
| |
| #define SSL_TXT_EXP "EXP" |
| #define SSL_TXT_EXPORT "EXPORT" |
| |
| #define SSL_TXT_ALL "ALL" |
| |
| /* |
| * COMPLEMENTOF* definitions. These identifiers are used to (de-select) |
| * ciphers normally not being used. |
| * Example: "RC4" will activate all ciphers using RC4 including ciphers |
| * without authentication, which would normally disabled by DEFAULT (due |
| * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" |
| * will make sure that it is also disabled in the specific selection. |
| * COMPLEMENTOF* identifiers are portable between version, as adjustments |
| * to the default cipher setup will also be included here. |
| * |
| * COMPLEMENTOFDEFAULT does not experience the same special treatment that |
| * DEFAULT gets, as only selection is being done and no sorting as needed |
| * for DEFAULT. |
| */ |
| #define SSL_TXT_CMPALL "COMPLEMENTOFALL" |
| #define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" |
| |
| /* The following cipher list is used by default. |
| * It also is substituted when an application-defined cipher list string |
| * starts with 'DEFAULT'. */ |
| #define SSL_DEFAULT_CIPHER_LIST "ALL:!aNULL:!eNULL:!SSLv2" |
| /* As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always |
| * starts with a reasonable order, and all we have to do for DEFAULT is |
| * throwing out anonymous and unencrypted ciphersuites! |
| * (The latter are not actually enabled by ALL, but "ALL:RSA" would enable |
| * some of them.) |
| */ |
| |
| /* Used in SSL_set_shutdown()/SSL_get_shutdown(); */ |
| #define SSL_SENT_SHUTDOWN 1 |
| #define SSL_RECEIVED_SHUTDOWN 2 |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 |
| #define SSL_FILETYPE_PEM X509_FILETYPE_PEM |
| |
| /* This is needed to stop compilers complaining about the |
| * 'struct ssl_st *' function parameters used to prototype callbacks |
| * in SSL_CTX. */ |
| typedef struct ssl_st *ssl_crock_st; |
| typedef struct tls_session_ticket_ext_st TLS_SESSION_TICKET_EXT; |
| typedef struct ssl_method_st SSL_METHOD; |
| typedef struct ssl_cipher_st SSL_CIPHER; |
| typedef struct ssl_session_st SSL_SESSION; |
| typedef struct tls_sigalgs_st TLS_SIGALGS; |
| typedef struct ssl_conf_ctx_st SSL_CONF_CTX; |
| |
| DECLARE_STACK_OF(SSL_CIPHER) |
| |
| /* SRTP protection profiles for use with the use_srtp extension (RFC 5764)*/ |
| typedef struct srtp_protection_profile_st |
| { |
| const char *name; |
| unsigned long id; |
| } SRTP_PROTECTION_PROFILE; |
| |
| DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE) |
| |
| typedef int (*tls_session_ticket_ext_cb_fn)(SSL *s, const unsigned char *data, int len, void *arg); |
| typedef int (*tls_session_secret_cb_fn)(SSL *s, void *secret, int *secret_len, STACK_OF(SSL_CIPHER) *peer_ciphers, SSL_CIPHER **cipher, void *arg); |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| /* Callbacks and structures for handling custom TLS Extensions: |
| * cli_ext_first_cb - sends data for ClientHello TLS Extension |
| * cli_ext_second_cb - receives data from ServerHello TLS Extension |
| * srv_ext_first_cb - receives data from ClientHello TLS Extension |
| * srv_ext_second_cb - sends data for ServerHello TLS Extension |
| * |
| * All these functions return nonzero on success. Zero will terminate |
| * the handshake (and return a specific TLS Fatal alert, if the function |
| * declaration has an "al" parameter). -1 for the "sending" functions |
| * will cause the TLS Extension to be omitted. |
| * |
| * "ext_type" is a TLS "ExtensionType" from 0-65535. |
| * "in" is a pointer to TLS "extension_data" being provided to the cb. |
| * "out" is used by the callback to return a pointer to "extension data" |
| * which OpenSSL will later copy into the TLS handshake. The contents |
| * of this buffer should not be changed until the handshake is complete. |
| * "inlen" and "outlen" are TLS Extension lengths from 0-65535. |
| * "al" is a TLS "AlertDescription" from 0-255 which WILL be sent as a |
| * fatal TLS alert, if the callback returns zero. |
| */ |
| typedef int (*custom_cli_ext_first_cb_fn)(SSL *s, unsigned short ext_type, |
| const unsigned char **out, |
| unsigned short *outlen, void *arg); |
| typedef int (*custom_cli_ext_second_cb_fn)(SSL *s, unsigned short ext_type, |
| const unsigned char *in, |
| unsigned short inlen, int *al, |
| void *arg); |
| |
| typedef int (*custom_srv_ext_first_cb_fn)(SSL *s, unsigned short ext_type, |
| const unsigned char *in, |
| unsigned short inlen, int *al, |
| void *arg); |
| typedef int (*custom_srv_ext_second_cb_fn)(SSL *s, unsigned short ext_type, |
| const unsigned char **out, |
| unsigned short *outlen, void *arg); |
| |
| typedef struct { |
| unsigned short ext_type; |
| custom_cli_ext_first_cb_fn fn1; |
| custom_cli_ext_second_cb_fn fn2; |
| void *arg; |
| } custom_cli_ext_record; |
| |
| typedef struct { |
| unsigned short ext_type; |
| custom_srv_ext_first_cb_fn fn1; |
| custom_srv_ext_second_cb_fn fn2; |
| void *arg; |
| } custom_srv_ext_record; |
| #endif |
| |
| #ifndef OPENSSL_NO_SSL_INTERN |
| |
| /* used to hold info on the particular ciphers used */ |
| struct ssl_cipher_st |
| { |
| int valid; |
| const char *name; /* text name */ |
| unsigned long id; /* id, 4 bytes, first is version */ |
| |
| /* changed in 0.9.9: these four used to be portions of a single value 'algorithms' */ |
| unsigned long algorithm_mkey; /* key exchange algorithm */ |
| unsigned long algorithm_auth; /* server authentication */ |
| unsigned long algorithm_enc; /* symmetric encryption */ |
| unsigned long algorithm_mac; /* symmetric authentication */ |
| unsigned long algorithm_ssl; /* (major) protocol version */ |
| |
| unsigned long algo_strength; /* strength and export flags */ |
| unsigned long algorithm2; /* Extra flags. See SSL2_CF_* in ssl2.h |
| and algorithm2 section in |
| ssl_locl.h */ |
| int strength_bits; /* Number of bits really used */ |
| int alg_bits; /* Number of bits for algorithm */ |
| }; |
| |
| |
| /* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */ |
| struct ssl_method_st |
| { |
| int version; |
| int (*ssl_new)(SSL *s); |
| void (*ssl_clear)(SSL *s); |
| void (*ssl_free)(SSL *s); |
| int (*ssl_accept)(SSL *s); |
| int (*ssl_connect)(SSL *s); |
| int (*ssl_read)(SSL *s,void *buf,int len); |
| int (*ssl_peek)(SSL *s,void *buf,int len); |
| int (*ssl_write)(SSL *s,const void *buf,int len); |
| int (*ssl_shutdown)(SSL *s); |
| int (*ssl_renegotiate)(SSL *s); |
| int (*ssl_renegotiate_check)(SSL *s); |
| long (*ssl_get_message)(SSL *s, int st1, int stn, int mt, long |
| max, int *ok); |
| int (*ssl_read_bytes)(SSL *s, int type, unsigned char *buf, int len, |
| int peek); |
| int (*ssl_write_bytes)(SSL *s, int type, const void *buf_, int len); |
| int (*ssl_dispatch_alert)(SSL *s); |
| long (*ssl_ctrl)(SSL *s,int cmd,long larg,void *parg); |
| long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,void *parg); |
| const SSL_CIPHER *(*get_cipher_by_char)(const unsigned char *ptr); |
| int (*put_cipher_by_char)(const SSL_CIPHER *cipher,unsigned char *ptr); |
| int (*ssl_pending)(const SSL *s); |
| int (*num_ciphers)(void); |
| const SSL_CIPHER *(*get_cipher)(unsigned ncipher); |
| const struct ssl_method_st *(*get_ssl_method)(int version); |
| long (*get_timeout)(void); |
| struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ |
| int (*ssl_version)(void); |
| long (*ssl_callback_ctrl)(SSL *s, int cb_id, void (*fp)(void)); |
| long (*ssl_ctx_callback_ctrl)(SSL_CTX *s, int cb_id, void (*fp)(void)); |
| }; |
| |
| /* Lets make this into an ASN.1 type structure as follows |
| * SSL_SESSION_ID ::= SEQUENCE { |
| * version INTEGER, -- structure version number |
| * SSLversion INTEGER, -- SSL version number |
| * Cipher OCTET STRING, -- the 3 byte cipher ID |
| * Session_ID OCTET STRING, -- the Session ID |
| * Master_key OCTET STRING, -- the master key |
| * KRB5_principal OCTET STRING -- optional Kerberos principal |
| * Key_Arg [ 0 ] IMPLICIT OCTET STRING, -- the optional Key argument |
| * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time |
| * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds |
| * Peer [ 3 ] EXPLICIT X509, -- optional Peer Certificate |
| * Session_ID_context [ 4 ] EXPLICIT OCTET STRING, -- the Session ID context |
| * Verify_result [ 5 ] EXPLICIT INTEGER, -- X509_V_... code for `Peer' |
| * HostName [ 6 ] EXPLICIT OCTET STRING, -- optional HostName from servername TLS extension |
| * PSK_identity_hint [ 7 ] EXPLICIT OCTET STRING, -- optional PSK identity hint |
| * PSK_identity [ 8 ] EXPLICIT OCTET STRING, -- optional PSK identity |
| * Ticket_lifetime_hint [9] EXPLICIT INTEGER, -- server's lifetime hint for session ticket |
| * Ticket [10] EXPLICIT OCTET STRING, -- session ticket (clients only) |
| * Compression_meth [11] EXPLICIT OCTET STRING, -- optional compression method |
| * SRP_username [ 12 ] EXPLICIT OCTET STRING -- optional SRP username |
| * Peer SHA256 [13] EXPLICIT OCTET STRING, -- optional SHA256 hash of Peer certifiate |
| * } |
| * Look in ssl/ssl_asn1.c for more details |
| * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-). |
| */ |
| struct ssl_session_st |
| { |
| int ssl_version; /* what ssl version session info is |
| * being kept in here? */ |
| |
| /* only really used in SSLv2 */ |
| unsigned int key_arg_length; |
| unsigned char key_arg[SSL_MAX_KEY_ARG_LENGTH]; |
| int master_key_length; |
| unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; |
| /* session_id - valid? */ |
| unsigned int session_id_length; |
| unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; |
| /* this is used to determine whether the session is being reused in |
| * the appropriate context. It is up to the application to set this, |
| * via SSL_new */ |
| unsigned int sid_ctx_length; |
| unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| |
| #ifndef OPENSSL_NO_PSK |
| char *psk_identity_hint; |
| char *psk_identity; |
| #endif |
| /* Used to indicate that session resumption is not allowed. |
| * Applications can also set this bit for a new session via |
| * not_resumable_session_cb to disable session caching and tickets. */ |
| int not_resumable; |
| |
| /* The cert is the certificate used to establish this connection */ |
| struct sess_cert_st /* SESS_CERT */ *sess_cert; |
| |
| /* This is the cert for the other end. |
| * On clients, it will be the same as sess_cert->peer_key->x509 |
| * (the latter is not enough as sess_cert is not retained |
| * in the external representation of sessions, see ssl_asn1.c). */ |
| X509 *peer; |
| /* when app_verify_callback accepts a session where the peer's certificate |
| * is not ok, we must remember the error for session reuse: */ |
| long verify_result; /* only for servers */ |
| |
| int references; |
| long timeout; |
| long time; |
| |
| unsigned int compress_meth; /* Need to lookup the method */ |
| |
| const SSL_CIPHER *cipher; |
| unsigned long cipher_id; /* when ASN.1 loaded, this |
| * needs to be used to load |
| * the 'cipher' structure */ |
| |
| STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */ |
| |
| CRYPTO_EX_DATA ex_data; /* application specific data */ |
| |
| /* These are used to make removal of session-ids more |
| * efficient and to implement a maximum cache size. */ |
| struct ssl_session_st *prev,*next; |
| #ifndef OPENSSL_NO_TLSEXT |
| char *tlsext_hostname; |
| #ifndef OPENSSL_NO_EC |
| size_t tlsext_ecpointformatlist_length; |
| unsigned char *tlsext_ecpointformatlist; /* peer's list */ |
| size_t tlsext_ellipticcurvelist_length; |
| unsigned char *tlsext_ellipticcurvelist; /* peer's list */ |
| #endif /* OPENSSL_NO_EC */ |
| /* RFC4507 info */ |
| unsigned char *tlsext_tick; /* Session ticket */ |
| size_t tlsext_ticklen; /* Session ticket length */ |
| long tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */ |
| #endif |
| char peer_sha256_valid; /* Non-zero if peer_sha256 is valid */ |
| unsigned char peer_sha256[SHA256_DIGEST_LENGTH]; /* SHA256 of peer certificate */ |
| #ifndef OPENSSL_NO_TLSEXT |
| /* Used by client: the proof for this session. |
| * We store it outside the sess_cert structure, since the proof |
| * is received before the certificate. */ |
| unsigned char *audit_proof; |
| size_t audit_proof_length; |
| #endif |
| |
| /* original_handshake_hash contains the handshake hash (either |
| * SHA-1+MD5 or SHA-2, depending on TLS version) for the original, full |
| * handshake that created a session. This is used by Channel IDs during |
| * resumption. */ |
| unsigned char original_handshake_hash[EVP_MAX_MD_SIZE]; |
| unsigned int original_handshake_hash_len; |
| }; |
| |
| #endif |
| |
| #define SSL_OP_MICROSOFT_SESS_ID_BUG 0x00000001L |
| #define SSL_OP_NETSCAPE_CHALLENGE_BUG 0x00000002L |
| /* Allow initial connection to servers that don't support RI */ |
| #define SSL_OP_LEGACY_SERVER_CONNECT 0x00000004L |
| #define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0x00000008L |
| #define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0x00000010L |
| #define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L |
| #define SSL_OP_SAFARI_ECDHE_ECDSA_BUG 0x00000040L |
| #define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0x00000080L |
| #define SSL_OP_TLS_D5_BUG 0x00000100L |
| #define SSL_OP_TLS_BLOCK_PADDING_BUG 0x00000200L |
| |
| /* Hasn't done anything since OpenSSL 0.9.7h, retained for compatibility */ |
| #define SSL_OP_MSIE_SSLV2_RSA_PADDING 0x0 |
| |
| /* SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS is vestigial. Previously it disabled the |
| * insertion of empty records in CBC mode, but the empty records were commonly |
| * misinterpreted as EOF by other TLS stacks and so this was disabled by |
| * SSL_OP_ALL. |
| * |
| * This has been replaced by 1/n-1 record splitting, which is enabled by |
| * SSL_MODE_CBC_RECORD_SPLITTING in SSL_set_mode. This involves sending a |
| * one-byte record rather than an empty record and has much better |
| * compatibility. */ |
| #define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0x00000800L /* added in 0.9.6e */ |
| |
| /* SSL_OP_ALL: various bug workarounds that should be rather harmless. |
| * This used to be 0x000FFFFFL before 0.9.7. */ |
| #define SSL_OP_ALL 0x80000BFFL |
| |
| /* DTLS options */ |
| #define SSL_OP_NO_QUERY_MTU 0x00001000L |
| /* Turn on Cookie Exchange (on relevant for servers) */ |
| #define SSL_OP_COOKIE_EXCHANGE 0x00002000L |
| /* Don't use RFC4507 ticket extension */ |
| #define SSL_OP_NO_TICKET 0x00004000L |
| /* Use Cisco's "speshul" version of DTLS_BAD_VER (as client) */ |
| #define SSL_OP_CISCO_ANYCONNECT 0x00008000L |
| |
| /* As server, disallow session resumption on renegotiation */ |
| #define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0x00010000L |
| /* Don't use compression even if supported */ |
| #define SSL_OP_NO_COMPRESSION 0x00020000L |
| /* Permit unsafe legacy renegotiation */ |
| #define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0x00040000L |
| /* If set, always create a new key when using tmp_ecdh parameters */ |
| #define SSL_OP_SINGLE_ECDH_USE 0x00080000L |
| /* If set, always create a new key when using tmp_dh parameters */ |
| #define SSL_OP_SINGLE_DH_USE 0x00100000L |
| /* Set to always use the tmp_rsa key when doing RSA operations, |
| * even when this violates protocol specs */ |
| #define SSL_OP_EPHEMERAL_RSA 0x00200000L |
| /* Set on servers to choose the cipher according to the server's |
| * preferences */ |
| #define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L |
| /* If set, a server will allow a client to issue a SSLv3.0 version number |
| * as latest version supported in the premaster secret, even when TLSv1.0 |
| * (version 3.1) was announced in the client hello. Normally this is |
| * forbidden to prevent version rollback attacks. */ |
| #define SSL_OP_TLS_ROLLBACK_BUG 0x00800000L |
| |
| #define SSL_OP_NO_SSLv2 0x01000000L |
| #define SSL_OP_NO_SSLv3 0x02000000L |
| #define SSL_OP_NO_TLSv1 0x04000000L |
| #define SSL_OP_NO_TLSv1_2 0x08000000L |
| #define SSL_OP_NO_TLSv1_1 0x10000000L |
| |
| #define SSL_OP_NO_DTLSv1 0x04000000L |
| #define SSL_OP_NO_DTLSv1_2 0x08000000L |
| |
| #define SSL_OP_NO_SSL_MASK (SSL_OP_NO_SSLv2|SSL_OP_NO_SSLv3|\ |
| SSL_OP_NO_TLSv1|SSL_OP_NO_TLSv1_1|SSL_OP_NO_TLSv1_2) |
| |
| /* These next two were never actually used for anything since SSLeay |
| * zap so we have some more flags. |
| */ |
| /* The next flag deliberately changes the ciphertest, this is a check |
| * for the PKCS#1 attack */ |
| #define SSL_OP_PKCS1_CHECK_1 0x0 |
| #define SSL_OP_PKCS1_CHECK_2 0x0 |
| |
| #define SSL_OP_NETSCAPE_CA_DN_BUG 0x20000000L |
| #define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x40000000L |
| /* Make server add server-hello extension from early version of |
| * cryptopro draft, when GOST ciphersuite is negotiated. |
| * Required for interoperability with CryptoPro CSP 3.x |
| */ |
| #define SSL_OP_CRYPTOPRO_TLSEXT_BUG 0x80000000L |
| |
| /* Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success |
| * when just a single record has been written): */ |
| #define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L |
| /* Make it possible to retry SSL_write() with changed buffer location |
| * (buffer contents must stay the same!); this is not the default to avoid |
| * the misconception that non-blocking SSL_write() behaves like |
| * non-blocking write(): */ |
| #define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L |
| /* Never bother the application with retries if the transport |
| * is blocking: */ |
| #define SSL_MODE_AUTO_RETRY 0x00000004L |
| /* Don't attempt to automatically build certificate chain */ |
| #define SSL_MODE_NO_AUTO_CHAIN 0x00000008L |
| /* Save RAM by releasing read and write buffers when they're empty. (SSL3 and |
| * TLS only.) "Released" buffers are put onto a free-list in the context or |
| * just freed (depending on the context's setting for freelist_max_len). Also |
| * frees up RAM by releasing the list of client ciphersuites as soon as |
| * possible (SSL3 and TLS only). This stops SSL_get_shared_ciphers from |
| * working. */ |
| #define SSL_MODE_RELEASE_BUFFERS 0x00000010L |
| |
| /* Send the current time in the Random fields of the ClientHello and |
| * ServerHello records for compatibility with hypothetical implementations |
| * that require it. |
| */ |
| #define SSL_MODE_SEND_CLIENTHELLO_TIME 0x00000020L |
| #define SSL_MODE_SEND_SERVERHELLO_TIME 0x00000040L |
| |
| /* Cert related flags */ |
| /* Many implementations ignore some aspects of the TLS standards such as |
| * enforcing certifcate chain algorithms. When this is set we enforce them. |
| */ |
| #define SSL_CERT_FLAG_TLS_STRICT 0x00000001L |
| |
| /* Suite B modes, takes same values as certificate verify flags */ |
| #define SSL_CERT_FLAG_SUITEB_128_LOS_ONLY 0x10000 |
| /* Suite B 192 bit only mode */ |
| #define SSL_CERT_FLAG_SUITEB_192_LOS 0x20000 |
| /* Suite B 128 bit mode allowing 192 bit algorithms */ |
| #define SSL_CERT_FLAG_SUITEB_128_LOS 0x30000 |
| |
| /* Perform all sorts of protocol violations for testing purposes */ |
| #define SSL_CERT_FLAG_BROKEN_PROTOCOL 0x10000000 |
| |
| /* Flags for building certificate chains */ |
| /* Treat any existing certificates as untrusted CAs */ |
| #define SSL_BUILD_CHAIN_FLAG_UNTRUSTED 0x1 |
| /* Don't include root CA in chain */ |
| #define SSL_BUILD_CHAIN_FLAG_NO_ROOT 0x2 |
| /* Just check certificates already there */ |
| #define SSL_BUILD_CHAIN_FLAG_CHECK 0x4 |
| /* Ignore verification errors */ |
| #define SSL_BUILD_CHAIN_FLAG_IGNORE_ERROR 0x8 |
| /* Clear verification errors from queue */ |
| #define SSL_BUILD_CHAIN_FLAG_CLEAR_ERROR 0x10 |
| |
| /* Flags returned by SSL_check_chain */ |
| /* Certificate can be used with this session */ |
| #define CERT_PKEY_VALID 0x1 |
| /* Certificate can also be used for signing */ |
| #define CERT_PKEY_SIGN 0x2 |
| /* EE certificate signing algorithm OK */ |
| #define CERT_PKEY_EE_SIGNATURE 0x10 |
| /* CA signature algorithms OK */ |
| #define CERT_PKEY_CA_SIGNATURE 0x20 |
| /* EE certificate parameters OK */ |
| #define CERT_PKEY_EE_PARAM 0x40 |
| /* CA certificate parameters OK */ |
| #define CERT_PKEY_CA_PARAM 0x80 |
| /* Signing explicitly allowed as opposed to SHA1 fallback */ |
| #define CERT_PKEY_EXPLICIT_SIGN 0x100 |
| /* Client CA issuer names match (always set for server cert) */ |
| #define CERT_PKEY_ISSUER_NAME 0x200 |
| /* Cert type matches client types (always set for server cert) */ |
| #define CERT_PKEY_CERT_TYPE 0x400 |
| /* Cert chain suitable to Suite B */ |
| #define CERT_PKEY_SUITEB 0x800 |
| |
| #define SSL_CONF_FLAG_CMDLINE 0x1 |
| #define SSL_CONF_FLAG_FILE 0x2 |
| #define SSL_CONF_FLAG_CLIENT 0x4 |
| #define SSL_CONF_FLAG_SERVER 0x8 |
| #define SSL_CONF_FLAG_SHOW_ERRORS 0x10 |
| #define SSL_CONF_FLAG_CERTIFICATE 0x20 |
| /* Configuration value types */ |
| #define SSL_CONF_TYPE_UNKNOWN 0x0 |
| #define SSL_CONF_TYPE_STRING 0x1 |
| #define SSL_CONF_TYPE_FILE 0x2 |
| #define SSL_CONF_TYPE_DIR 0x3 |
| |
| /* When set, clients may send application data before receipt of CCS |
| * and Finished. This mode enables full-handshakes to 'complete' in |
| * one RTT. */ |
| #define SSL_MODE_HANDSHAKE_CUTTHROUGH 0x00000080L |
| |
| /* When set, TLS 1.0 and SSLv3, multi-byte, CBC records will be split in two: |
| * the first record will contain a single byte and the second will contain the |
| * rest of the bytes. This effectively randomises the IV and prevents BEAST |
| * attacks. */ |
| #define SSL_MODE_CBC_RECORD_SPLITTING 0x00000100L |
| |
| /* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, |
| * they cannot be used to clear bits. */ |
| |
| #define SSL_CTX_set_options(ctx,op) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL) |
| #define SSL_CTX_clear_options(ctx,op) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_OPTIONS,(op),NULL) |
| #define SSL_CTX_get_options(ctx) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL) |
| #define SSL_set_options(ssl,op) \ |
| SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL) |
| #define SSL_clear_options(ssl,op) \ |
| SSL_ctrl((ssl),SSL_CTRL_CLEAR_OPTIONS,(op),NULL) |
| #define SSL_get_options(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL) |
| |
| #define SSL_CTX_set_mode(ctx,op) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL) |
| #define SSL_CTX_clear_mode(ctx,op) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_MODE,(op),NULL) |
| #define SSL_CTX_get_mode(ctx) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL) |
| #define SSL_clear_mode(ssl,op) \ |
| SSL_ctrl((ssl),SSL_CTRL_CLEAR_MODE,(op),NULL) |
| #define SSL_set_mode(ssl,op) \ |
| SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL) |
| #define SSL_get_mode(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL) |
| #define SSL_set_mtu(ssl, mtu) \ |
| SSL_ctrl((ssl),SSL_CTRL_SET_MTU,(mtu),NULL) |
| |
| #define SSL_get_secure_renegotiation_support(ssl) \ |
| SSL_ctrl((SSL*) (ssl), SSL_CTRL_GET_RI_SUPPORT, 0, NULL) |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| #define SSL_heartbeat(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_TLS_EXT_SEND_HEARTBEAT,0,NULL) |
| #endif |
| |
| #define SSL_CTX_set_cert_flags(ctx,op) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_CERT_FLAGS,(op),NULL) |
| #define SSL_set_cert_flags(s,op) \ |
| SSL_ctrl((s),SSL_CTRL_CERT_FLAGS,(op),NULL) |
| #define SSL_CTX_clear_cert_flags(ctx,op) \ |
| SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_CERT_FLAGS,(op),NULL) |
| #define SSL_clear_cert_flags(s,op) \ |
| SSL_ctrl((s),SSL_CTRL_CLEAR_CERT_FLAGS,(op),NULL) |
| |
| void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); |
| void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); |
| #define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) |
| #define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) |
| |
| |
| struct ssl_aead_ctx_st; |
| typedef struct ssl_aead_ctx_st SSL_AEAD_CTX; |
| |
| #if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32) |
| #define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */ |
| #else |
| #define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */ |
| #endif |
| |
| #define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024*20) |
| |
| /* This callback type is used inside SSL_CTX, SSL, and in the functions that set |
| * them. It is used to override the generation of SSL/TLS session IDs in a |
| * server. Return value should be zero on an error, non-zero to proceed. Also, |
| * callbacks should themselves check if the id they generate is unique otherwise |
| * the SSL handshake will fail with an error - callbacks can do this using the |
| * 'ssl' value they're passed by; |
| * SSL_has_matching_session_id(ssl, id, *id_len) |
| * The length value passed in is set at the maximum size the session ID can be. |
| * In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback |
| * can alter this length to be less if desired, but under SSLv2 session IDs are |
| * supposed to be fixed at 16 bytes so the id will be padded after the callback |
| * returns in this case. It is also an error for the callback to set the size to |
| * zero. */ |
| typedef int (*GEN_SESSION_CB)(const SSL *ssl, unsigned char *id, |
| unsigned int *id_len); |
| |
| /* ssl_early_callback_ctx is passed to certain callbacks that are called very |
| * early on during the server handshake. At this point, much of the SSL* |
| * hasn't been filled out and only the ClientHello can be depended on. */ |
| struct ssl_early_callback_ctx |
| { |
| SSL *ssl; |
| const unsigned char *client_hello; size_t client_hello_len; |
| const unsigned char *session_id; size_t session_id_len; |
| const unsigned char *cipher_suites; size_t cipher_suites_len; |
| const unsigned char *compression_methods;size_t compression_methods_len; |
| const unsigned char *extensions; size_t extensions_len; |
| }; |
| |
| /* SSL_early_callback_ctx_extension_get searches the extensions in |ctx| for |
| * an extension of the given type. If not found, it returns zero. Otherwise |
| * it sets |out_data| to point to the extension contents (not including the type |
| * and length bytes), sets |out_len| to the length of the extension contents |
| * and returns one. */ |
| char |
| SSL_early_callback_ctx_extension_get(const struct ssl_early_callback_ctx *ctx, |
| uint16_t extension_type, |
| const unsigned char **out_data, |
| size_t *out_len); |
| |
| typedef struct ssl_comp_st SSL_COMP; |
| |
| #ifndef OPENSSL_NO_SSL_INTERN |
| |
| struct ssl_comp_st |
| { |
| int id; |
| const char *name; |
| char *method; |
| }; |
| |
| DECLARE_STACK_OF(SSL_COMP) |
| DECLARE_LHASH_OF(SSL_SESSION); |
| |
| /* ssl_cipher_preference_list_st contains a list of SSL_CIPHERs with |
| * equal-preference groups. For TLS clients, the groups are moot because the |
| * server picks the cipher and groups cannot be expressed on the wire. However, |
| * for servers, the equal-preference groups allow the client's preferences to |
| * be partially respected. (This only has an effect with |
| * SSL_OP_CIPHER_SERVER_PREFERENCE). |
| * |
| * The equal-preference groups are expressed by grouping SSL_CIPHERs together. |
| * All elements of a group have the same priority: no ordering is expressed |
| * within a group. |
| * |
| * The values in |ciphers| are in one-to-one correspondence with |
| * |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of |
| * bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to |
| * indicate that the corresponding SSL_CIPHER is not the last element of a |
| * group, or 0 to indicate that it is. |
| * |
| * For example, if |in_group_flags| contains all zeros then that indicates a |
| * traditional, fully-ordered preference. Every SSL_CIPHER is the last element |
| * of the group (i.e. they are all in a one-element group). |
| * |
| * For a more complex example, consider: |
| * ciphers: A B C D E F |
| * in_group_flags: 1 1 0 0 1 0 |
| * |
| * That would express the following, order: |
| * |
| * A E |
| * B -> D -> F |
| * C |
| */ |
| struct ssl_cipher_preference_list_st |
| { |
| STACK_OF(SSL_CIPHER) *ciphers; |
| unsigned char *in_group_flags; |
| }; |
| |
| struct ssl_ctx_st |
| { |
| const SSL_METHOD *method; |
| |
| struct ssl_cipher_preference_list_st *cipher_list; |
| /* same as above but sorted for lookup */ |
| STACK_OF(SSL_CIPHER) *cipher_list_by_id; |
| /* cipher_list_tls11 is the list of ciphers when TLS 1.1 or greater is |
| * in use. This only applies to server connections as, for clients, the |
| * version number is known at connect time and so the cipher list can |
| * be set then. */ |
| struct ssl_cipher_preference_list_st *cipher_list_tls11; |
| |
| struct x509_store_st /* X509_STORE */ *cert_store; |
| LHASH_OF(SSL_SESSION) *sessions; |
| /* Most session-ids that will be cached, default is |
| * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */ |
| unsigned long session_cache_size; |
| struct ssl_session_st *session_cache_head; |
| struct ssl_session_st *session_cache_tail; |
| |
| /* This can have one of 2 values, ored together, |
| * SSL_SESS_CACHE_CLIENT, |
| * SSL_SESS_CACHE_SERVER, |
| * Default is SSL_SESSION_CACHE_SERVER, which means only |
| * SSL_accept which cache SSL_SESSIONS. */ |
| int session_cache_mode; |
| |
| /* If timeout is not 0, it is the default timeout value set |
| * when SSL_new() is called. This has been put in to make |
| * life easier to set things up */ |
| long session_timeout; |
| |
| /* If this callback is not null, it will be called each |
| * time a session id is added to the cache. If this function |
| * returns 1, it means that the callback will do a |
| * SSL_SESSION_free() when it has finished using it. Otherwise, |
| * on 0, it means the callback has finished with it. |
| * If remove_session_cb is not null, it will be called when |
| * a session-id is removed from the cache. After the call, |
| * OpenSSL will SSL_SESSION_free() it. */ |
| int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess); |
| void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess); |
| SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, |
| unsigned char *data,int len,int *copy); |
| |
| struct |
| { |
| int sess_connect; /* SSL new conn - started */ |
| int sess_connect_renegotiate;/* SSL reneg - requested */ |
| int sess_connect_good; /* SSL new conne/reneg - finished */ |
| int sess_accept; /* SSL new accept - started */ |
| int sess_accept_renegotiate;/* SSL reneg - requested */ |
| int sess_accept_good; /* SSL accept/reneg - finished */ |
| int sess_miss; /* session lookup misses */ |
| int sess_timeout; /* reuse attempt on timeouted session */ |
| int sess_cache_full; /* session removed due to full cache */ |
| int sess_hit; /* session reuse actually done */ |
| int sess_cb_hit; /* session-id that was not |
| * in the cache was |
| * passed back via the callback. This |
| * indicates that the application is |
| * supplying session-id's from other |
| * processes - spooky :-) */ |
| } stats; |
| |
| int references; |
| |
| /* if defined, these override the X509_verify_cert() calls */ |
| int (*app_verify_callback)(X509_STORE_CTX *, void *); |
| void *app_verify_arg; |
| /* before OpenSSL 0.9.7, 'app_verify_arg' was ignored |
| * ('app_verify_callback' was called with just one argument) */ |
| |
| /* Default password callback. */ |
| pem_password_cb *default_passwd_callback; |
| |
| /* Default password callback user data. */ |
| void *default_passwd_callback_userdata; |
| |
| /* get client cert callback */ |
| int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey); |
| |
| /* get channel id callback */ |
| void (*channel_id_cb)(SSL *ssl, EVP_PKEY **pkey); |
| |
| /* cookie generate callback */ |
| int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie, |
| unsigned int *cookie_len); |
| |
| /* verify cookie callback */ |
| int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie, |
| unsigned int cookie_len); |
| |
| CRYPTO_EX_DATA ex_data; |
| |
| const EVP_MD *rsa_md5;/* For SSLv2 - name is 'ssl2-md5' */ |
| const EVP_MD *md5; /* For SSLv3/TLSv1 'ssl3-md5' */ |
| const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */ |
| |
| STACK_OF(X509) *extra_certs; |
| STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ |
| |
| |
| /* Default values used when no per-SSL value is defined follow */ |
| |
| void (*info_callback)(const SSL *ssl,int type,int val); /* used if SSL's info_callback is NULL */ |
| |
| /* what we put in client cert requests */ |
| STACK_OF(X509_NAME) *client_CA; |
| |
| |
| /* Default values to use in SSL structures follow (these are copied by SSL_new) */ |
| |
| unsigned long options; |
| unsigned long mode; |
| long max_cert_list; |
| |
| struct cert_st /* CERT */ *cert; |
| int read_ahead; |
| |
| /* callback that allows applications to peek at protocol messages */ |
| void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); |
| void *msg_callback_arg; |
| |
| int verify_mode; |
| unsigned int sid_ctx_length; |
| unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */ |
| |
| /* Default generate session ID callback. */ |
| GEN_SESSION_CB generate_session_id; |
| |
| X509_VERIFY_PARAM *param; |
| |
| /* select_certificate_cb is called before most ClientHello processing |
| * and before the decision whether to resume a session is made. |
| * It may return one to continue the handshake or zero to cause the |
| * handshake loop to return with an error and cause SSL_get_error to |
| * return SSL_ERROR_PENDING_CERTIFICATE. */ |
| int (*select_certificate_cb) (const struct ssl_early_callback_ctx *); |
| |
| #if 0 |
| int purpose; /* Purpose setting */ |
| int trust; /* Trust setting */ |
| #endif |
| |
| int quiet_shutdown; |
| |
| /* Maximum amount of data to send in one fragment. |
| * actual record size can be more than this due to |
| * padding and MAC overheads. |
| */ |
| unsigned int max_send_fragment; |
| |
| #ifndef OPENSSL_ENGINE |
| /* Engine to pass requests for client certs to |
| */ |
| ENGINE *client_cert_engine; |
| #endif |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| /* TLS extensions servername callback */ |
| int (*tlsext_servername_callback)(SSL*, int *, void *); |
| void *tlsext_servername_arg; |
| /* RFC 4507 session ticket keys */ |
| unsigned char tlsext_tick_key_name[16]; |
| unsigned char tlsext_tick_hmac_key[16]; |
| unsigned char tlsext_tick_aes_key[16]; |
| /* Callback to support customisation of ticket key setting */ |
| int (*tlsext_ticket_key_cb)(SSL *ssl, |
| unsigned char *name, unsigned char *iv, |
| EVP_CIPHER_CTX *ectx, |
| HMAC_CTX *hctx, int enc); |
| |
| /* certificate status request info */ |
| /* Callback for status request */ |
| int (*tlsext_status_cb)(SSL *ssl, void *arg); |
| void *tlsext_status_arg; |
| |
| /* draft-rescorla-tls-opaque-prf-input-00.txt information */ |
| int (*tlsext_opaque_prf_input_callback)(SSL *, void *peerinput, size_t len, void *arg); |
| void *tlsext_opaque_prf_input_callback_arg; |
| #endif |
| |
| #ifndef OPENSSL_NO_PSK |
| char *psk_identity_hint; |
| unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, |
| unsigned int max_identity_len, unsigned char *psk, |
| unsigned int max_psk_len); |
| unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, |
| unsigned char *psk, unsigned int max_psk_len); |
| #endif |
| |
| #ifndef OPENSSL_NO_BUF_FREELISTS |
| #define SSL_MAX_BUF_FREELIST_LEN_DEFAULT 32 |
| unsigned int freelist_max_len; |
| struct ssl3_buf_freelist_st *wbuf_freelist; |
| struct ssl3_buf_freelist_st *rbuf_freelist; |
| /* retain_only_sha256_of_client_certs is true if we should compute the |
| * SHA256 hash of the peer's certifiate and then discard it to save |
| * memory and session space. Only effective on the server side. */ |
| char retain_only_sha256_of_client_certs; |
| #endif |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| |
| # ifndef OPENSSL_NO_NEXTPROTONEG |
| /* Next protocol negotiation information */ |
| /* (for experimental NPN extension). */ |
| |
| /* For a server, this contains a callback function by which the set of |
| * advertised protocols can be provided. */ |
| int (*next_protos_advertised_cb)(SSL *s, const unsigned char **buf, |
| unsigned int *len, void *arg); |
| void *next_protos_advertised_cb_arg; |
| /* For a client, this contains a callback function that selects the |
| * next protocol from the list provided by the server. */ |
| int (*next_proto_select_cb)(SSL *s, unsigned char **out, |
| unsigned char *outlen, |
| const unsigned char *in, |
| unsigned int inlen, |
| void *arg); |
| void *next_proto_select_cb_arg; |
| # endif |
| |
| /* ALPN information |
| * (we are in the process of transitioning from NPN to ALPN.) */ |
| |
| /* For a server, this contains a callback function that allows the |
| * server to select the protocol for the connection. |
| * out: on successful return, this must point to the raw protocol |
| * name (without the length prefix). |
| * outlen: on successful return, this contains the length of |*out|. |
| * in: points to the client's list of supported protocols in |
| * wire-format. |
| * inlen: the length of |in|. */ |
| int (*alpn_select_cb)(SSL *s, |
| const unsigned char **out, |
| unsigned char *outlen, |
| const unsigned char* in, |
| unsigned int inlen, |
| void *arg); |
| void *alpn_select_cb_arg; |
| |
| /* For a client, this contains the list of supported protocols in wire |
| * format. */ |
| unsigned char* alpn_client_proto_list; |
| unsigned alpn_client_proto_list_len; |
| |
| /* SRTP profiles we are willing to do from RFC 5764 */ |
| STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; |
| # ifndef OPENSSL_NO_EC |
| /* EC extension values inherited by SSL structure */ |
| size_t tlsext_ecpointformatlist_length; |
| unsigned char *tlsext_ecpointformatlist; |
| size_t tlsext_ellipticcurvelist_length; |
| unsigned char *tlsext_ellipticcurvelist; |
| # endif /* OPENSSL_NO_EC */ |
| int (*tlsext_authz_server_audit_proof_cb)(SSL *s, void *arg); |
| void *tlsext_authz_server_audit_proof_cb_arg; |
| #endif |
| |
| /* Arrays containing the callbacks for custom TLS Extensions. */ |
| custom_cli_ext_record *custom_cli_ext_records; |
| size_t custom_cli_ext_records_count; |
| custom_srv_ext_record *custom_srv_ext_records; |
| size_t custom_srv_ext_records_count; |
| |
| /* If true, a client will advertise the Channel ID extension and a |
| * server will echo it. */ |
| char tlsext_channel_id_enabled; |
| /* tlsext_channel_id_enabled_new is a hack to support both old and new |
| * ChannelID signatures. It indicates that a client should advertise the |
| * new ChannelID extension number. */ |
| char tlsext_channel_id_enabled_new; |
| /* The client's Channel ID private key. */ |
| EVP_PKEY *tlsext_channel_id_private; |
| |
| }; |
| |
| #endif |
| |
| #define SSL_SESS_CACHE_OFF 0x0000 |
| #define SSL_SESS_CACHE_CLIENT 0x0001 |
| #define SSL_SESS_CACHE_SERVER 0x0002 |
| #define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER) |
| #define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 |
| /* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */ |
| #define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 |
| #define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 |
| #define SSL_SESS_CACHE_NO_INTERNAL \ |
| (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE) |
| |
| LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx); |
| #define SSL_CTX_sess_number(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL) |
| #define SSL_CTX_sess_connect(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT,0,NULL) |
| #define SSL_CTX_sess_connect_good(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_GOOD,0,NULL) |
| #define SSL_CTX_sess_connect_renegotiate(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_RENEGOTIATE,0,NULL) |
| #define SSL_CTX_sess_accept(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT,0,NULL) |
| #define SSL_CTX_sess_accept_renegotiate(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_RENEGOTIATE,0,NULL) |
| #define SSL_CTX_sess_accept_good(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_GOOD,0,NULL) |
| #define SSL_CTX_sess_hits(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_HIT,0,NULL) |
| #define SSL_CTX_sess_cb_hits(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CB_HIT,0,NULL) |
| #define SSL_CTX_sess_misses(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_MISSES,0,NULL) |
| #define SSL_CTX_sess_timeouts(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_TIMEOUTS,0,NULL) |
| #define SSL_CTX_sess_cache_full(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CACHE_FULL,0,NULL) |
| /* SSL_CTX_enable_tls_channel_id configures a TLS server to accept TLS client |
| * IDs from clients. Returns 1 on success. */ |
| #define SSL_CTX_enable_tls_channel_id(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_CHANNEL_ID,0,NULL) |
| |
| void SSL_CTX_sess_set_new_cb(SSL_CTX *ctx, int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess)); |
| int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))(struct ssl_st *ssl, SSL_SESSION *sess); |
| void SSL_CTX_sess_set_remove_cb(SSL_CTX *ctx, void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess)); |
| void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))(struct ssl_ctx_st *ctx, SSL_SESSION *sess); |
| void SSL_CTX_sess_set_get_cb(SSL_CTX *ctx, SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, unsigned char *data,int len,int *copy)); |
| SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))(struct ssl_st *ssl, unsigned char *Data, int len, int *copy); |
| /* SSL_magic_pending_session_ptr returns a magic SSL_SESSION* which indicates |
| * that the session isn't currently unavailable. SSL_get_error will then return |
| * SSL_ERROR_PENDING_SESSION and the handshake can be retried later when the |
| * lookup has completed. */ |
| SSL_SESSION *SSL_magic_pending_session_ptr(void); |
| void SSL_CTX_set_info_callback(SSL_CTX *ctx, void (*cb)(const SSL *ssl,int type,int val)); |
| void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl,int type,int val); |
| void SSL_CTX_set_client_cert_cb(SSL_CTX *ctx, int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey)); |
| int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx))(SSL *ssl, X509 **x509, EVP_PKEY **pkey); |
| void SSL_CTX_set_channel_id_cb(SSL_CTX *ctx, void (*channel_id_cb)(SSL *ssl, EVP_PKEY **pkey)); |
| void (*SSL_CTX_get_channel_id_cb(SSL_CTX *ctx))(SSL *ssl, EVP_PKEY **pkey); |
| #ifndef OPENSSL_NO_ENGINE |
| int SSL_CTX_set_client_cert_engine(SSL_CTX *ctx, ENGINE *e); |
| #endif |
| void SSL_CTX_set_cookie_generate_cb(SSL_CTX *ctx, int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len)); |
| void SSL_CTX_set_cookie_verify_cb(SSL_CTX *ctx, int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int cookie_len)); |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| void SSL_CTX_set_next_protos_advertised_cb(SSL_CTX *s, |
| int (*cb) (SSL *ssl, |
| const unsigned char **out, |
| unsigned int *outlen, |
| void *arg), void *arg); |
| void SSL_CTX_set_next_proto_select_cb(SSL_CTX *s, |
| int (*cb) (SSL *ssl, unsigned char **out, |
| unsigned char *outlen, |
| const unsigned char *in, |
| unsigned int inlen, void *arg), |
| void *arg); |
| void SSL_get0_next_proto_negotiated(const SSL *s, |
| const unsigned char **data, unsigned *len); |
| #endif |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| int SSL_select_next_proto(unsigned char **out, unsigned char *outlen, |
| const unsigned char *in, unsigned int inlen, |
| const unsigned char *client, unsigned int client_len); |
| #endif |
| |
| #define OPENSSL_NPN_UNSUPPORTED 0 |
| #define OPENSSL_NPN_NEGOTIATED 1 |
| #define OPENSSL_NPN_NO_OVERLAP 2 |
| |
| int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const unsigned char* protos, |
| unsigned protos_len); |
| int SSL_set_alpn_protos(SSL *ssl, const unsigned char* protos, |
| unsigned protos_len); |
| void SSL_CTX_set_alpn_select_cb(SSL_CTX* ctx, |
| int (*cb) (SSL *ssl, |
| const unsigned char **out, |
| unsigned char *outlen, |
| const unsigned char *in, |
| unsigned int inlen, |
| void *arg), |
| void *arg); |
| void SSL_get0_alpn_selected(const SSL *ssl, const unsigned char **data, |
| unsigned *len); |
| |
| #ifndef OPENSSL_NO_PSK |
| /* the maximum length of the buffer given to callbacks containing the |
| * resulting identity/psk */ |
| #define PSK_MAX_IDENTITY_LEN 128 |
| #define PSK_MAX_PSK_LEN 256 |
| void SSL_CTX_set_psk_client_callback(SSL_CTX *ctx, |
| unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, |
| char *identity, unsigned int max_identity_len, unsigned char *psk, |
| unsigned int max_psk_len)); |
| void SSL_set_psk_client_callback(SSL *ssl, |
| unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, |
| char *identity, unsigned int max_identity_len, unsigned char *psk, |
| unsigned int max_psk_len)); |
| void SSL_CTX_set_psk_server_callback(SSL_CTX *ctx, |
| unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, |
| unsigned char *psk, unsigned int max_psk_len)); |
| void SSL_set_psk_server_callback(SSL *ssl, |
| unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, |
| unsigned char *psk, unsigned int max_psk_len)); |
| int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint); |
| int SSL_use_psk_identity_hint(SSL *s, const char *identity_hint); |
| const char *SSL_get_psk_identity_hint(const SSL *s); |
| const char *SSL_get_psk_identity(const SSL *s); |
| #endif |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| /* Register callbacks to handle custom TLS Extensions as client or server. |
| * |
| * Returns nonzero on success. You cannot register twice for the same |
| * extension number, and registering for an extension number already |
| * handled by OpenSSL will succeed, but the callbacks will not be invoked. |
| * |
| * NULL can be registered for any callback function. For the client |
| * functions, a NULL custom_cli_ext_first_cb_fn sends an empty ClientHello |
| * Extension, and a NULL custom_cli_ext_second_cb_fn ignores the ServerHello |
| * response (if any). |
| * |
| * For the server functions, a NULL custom_srv_ext_first_cb_fn means the |
| * ClientHello extension's data will be ignored, but the extension will still |
| * be noted and custom_srv_ext_second_cb_fn will still be invoked. A NULL |
| * custom_srv_ext_second_cb doesn't send a ServerHello extension. |
| */ |
| int SSL_CTX_set_custom_cli_ext(SSL_CTX *ctx, unsigned short ext_type, |
| custom_cli_ext_first_cb_fn fn1, |
| custom_cli_ext_second_cb_fn fn2, void *arg); |
| |
| int SSL_CTX_set_custom_srv_ext(SSL_CTX *ctx, unsigned short ext_type, |
| custom_srv_ext_first_cb_fn fn1, |
| custom_srv_ext_second_cb_fn fn2, void *arg); |
| #endif |
| |
| #define SSL_NOTHING 1 |
| #define SSL_WRITING 2 |
| #define SSL_READING 3 |
| #define SSL_X509_LOOKUP 4 |
| #define SSL_CHANNEL_ID_LOOKUP 5 |
| #define SSL_PENDING_SESSION 7 |
| #define SSL_CERTIFICATE_SELECTION_PENDING 8 |
| |
| /* These will only be used when doing non-blocking IO */ |
| #define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING) |
| #define SSL_want_read(s) (SSL_want(s) == SSL_READING) |
| #define SSL_want_write(s) (SSL_want(s) == SSL_WRITING) |
| #define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP) |
| #define SSL_want_channel_id_lookup(s) (SSL_want(s) == SSL_CHANNEL_ID_LOOKUP) |
| #define SSL_want_session(s) (SSL_want(s) == SSL_PENDING_SESSION) |
| #define SSL_want_certificate(s) (SSL_want(s) == SSL_CERTIFICATE_SELECTION_PENDING) |
| |
| #define SSL_MAC_FLAG_READ_MAC_STREAM 1 |
| #define SSL_MAC_FLAG_WRITE_MAC_STREAM 2 |
| |
| #ifndef OPENSSL_NO_SSL_INTERN |
| |
| struct ssl_st |
| { |
| /* protocol version |
| * (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, DTLS1_VERSION) |
| */ |
| int version; |
| int type; /* SSL_ST_CONNECT or SSL_ST_ACCEPT */ |
| |
| const SSL_METHOD *method; /* SSLv3 */ |
| |
| /* There are 2 BIO's even though they are normally both the |
| * same. This is so data can be read and written to different |
| * handlers */ |
| |
| #ifndef OPENSSL_NO_BIO |
| BIO *rbio; /* used by SSL_read */ |
| BIO *wbio; /* used by SSL_write */ |
| BIO *bbio; /* used during session-id reuse to concatenate |
| * messages */ |
| #else |
| char *rbio; /* used by SSL_read */ |
| char *wbio; /* used by SSL_write */ |
| char *bbio; |
| #endif |
| /* This holds a variable that indicates what we were doing |
| * when a 0 or -1 is returned. This is needed for |
| * non-blocking IO so we know what request needs re-doing when |
| * in SSL_accept or SSL_connect */ |
| int rwstate; |
| |
| /* true when we are actually in SSL_accept() or SSL_connect() */ |
| int in_handshake; |
| int (*handshake_func)(SSL *); |
| |
| /* Imagine that here's a boolean member "init" that is |
| * switched as soon as SSL_set_{accept/connect}_state |
| * is called for the first time, so that "state" and |
| * "handshake_func" are properly initialized. But as |
| * handshake_func is == 0 until then, we use this |
| * test instead of an "init" member. |
| */ |
| |
| int server; /* are we the server side? - mostly used by SSL_clear*/ |
| |
| int new_session;/* Generate a new session or reuse an old one. |
| * NB: For servers, the 'new' session may actually be a previously |
| * cached session or even the previous session unless |
| * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */ |
| int quiet_shutdown;/* don't send shutdown packets */ |
| int shutdown; /* we have shut things down, 0x01 sent, 0x02 |
| * for received */ |
| int state; /* where we are */ |
| int rstate; /* where we are when reading */ |
| |
| BUF_MEM *init_buf; /* buffer used during init */ |
| void *init_msg; /* pointer to handshake message body, set by ssl3_get_message() */ |
| int init_num; /* amount read/written */ |
| int init_off; /* amount read/written */ |
| |
| /* used internally to point at a raw packet */ |
| unsigned char *packet; |
| unsigned int packet_length; |
| |
| struct ssl2_state_st *s2; /* SSLv2 variables */ |
| struct ssl3_state_st *s3; /* SSLv3 variables */ |
| struct dtls1_state_st *d1; /* DTLSv1 variables */ |
| |
| int read_ahead; /* Read as many input bytes as possible |
| * (for non-blocking reads) */ |
| |
| /* callback that allows applications to peek at protocol messages */ |
| void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); |
| void *msg_callback_arg; |
| |
| int hit; /* reusing a previous session */ |
| |
| X509_VERIFY_PARAM *param; |
| |
| #if 0 |
| int purpose; /* Purpose setting */ |
| int trust; /* Trust setting */ |
| #endif |
| |
| /* crypto */ |
| struct ssl_cipher_preference_list_st *cipher_list; |
| STACK_OF(SSL_CIPHER) *cipher_list_by_id; |
| |
| /* These are the ones being used, the ones in SSL_SESSION are |
| * the ones to be 'copied' into these ones */ |
| int mac_flags; |
| SSL_AEAD_CTX *aead_read_ctx; /* AEAD context. If non-NULL, then |
| |enc_read_ctx| and |read_hash| are |
| ignored. */ |
| EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ |
| EVP_MD_CTX *read_hash; /* used for mac generation */ |
| char *expand; |
| |
| SSL_AEAD_CTX *aead_write_ctx; /* AEAD context. If non-NULL, then |
| |enc_write_ctx| and |write_hash| are |
| ignored. */ |
| EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ |
| EVP_MD_CTX *write_hash; /* used for mac generation */ |
| char *compress; |
| |
| /* session info */ |
| |
| /* client cert? */ |
| /* This is used to hold the server certificate used */ |
| struct cert_st /* CERT */ *cert; |
| |
| /* the session_id_context is used to ensure sessions are only reused |
| * in the appropriate context */ |
| unsigned int sid_ctx_length; |
| unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| |
| /* This can also be in the session once a session is established */ |
| SSL_SESSION *session; |
| |
| /* Default generate session ID callback. */ |
| GEN_SESSION_CB generate_session_id; |
| |
| /* Used in SSL2 and SSL3 */ |
| int verify_mode; /* 0 don't care about verify failure. |
| * 1 fail if verify fails */ |
| int (*verify_callback)(int ok,X509_STORE_CTX *ctx); /* fail if callback returns 0 */ |
| |
| void (*info_callback)(const SSL *ssl,int type,int val); /* optional informational callback */ |
| |
| int error; /* error bytes to be written */ |
| int error_code; /* actual code */ |
| |
| #ifndef OPENSSL_NO_PSK |
| /* PSK identity hint is stored here only to enable setting a hint on an SSL object before an |
| * SSL_SESSION is associated with it. Once an SSL_SESSION is associated with this SSL object, |
| * the psk_identity_hint from the session takes precedence over this one. */ |
| char *psk_identity_hint; |
| unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, |
| unsigned int max_identity_len, unsigned char *psk, |
| unsigned int max_psk_len); |
| unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, |
| unsigned char *psk, unsigned int max_psk_len); |
| #endif |
| |
| SSL_CTX *ctx; |
| /* set this flag to 1 and a sleep(1) is put into all SSL_read() |
| * and SSL_write() calls, good for nbio debuging :-) */ |
| int debug; |
| |
| /* extra application data */ |
| long verify_result; |
| CRYPTO_EX_DATA ex_data; |
| |
| /* for server side, keep the list of CA_dn we can use */ |
| STACK_OF(X509_NAME) *client_CA; |
| |
| int references; |
| unsigned long options; /* protocol behaviour */ |
| unsigned long mode; /* API behaviour */ |
| long max_cert_list; |
| int first_packet; |
| int client_version; /* what was passed, used for |
| * SSLv3/TLS rollback check */ |
| unsigned int max_send_fragment; |
| #ifndef OPENSSL_NO_TLSEXT |
| /* TLS extension debug callback */ |
| void (*tlsext_debug_cb)(SSL *s, int client_server, int type, |
| unsigned char *data, int len, |
| void *arg); |
| void *tlsext_debug_arg; |
| char *tlsext_hostname; |
| int servername_done; /* no further mod of servername |
| 0 : call the servername extension callback. |
| 1 : prepare 2, allow last ack just after in server callback. |
| 2 : don't call servername callback, no ack in server hello |
| */ |
| /* certificate status request info */ |
| /* Status type or -1 if no status type */ |
| int tlsext_status_type; |
| /* Expect OCSP CertificateStatus message */ |
| int tlsext_status_expected; |
| /* OCSP status request only */ |
| STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids; |
| X509_EXTENSIONS *tlsext_ocsp_exts; |
| /* OCSP response received or to be sent */ |
| unsigned char *tlsext_ocsp_resp; |
| int tlsext_ocsp_resplen; |
| |
| /* RFC4507 session ticket expected to be received or sent */ |
| int tlsext_ticket_expected; |
| #ifndef OPENSSL_NO_EC |
| size_t tlsext_ecpointformatlist_length; |
| unsigned char *tlsext_ecpointformatlist; /* our list */ |
| size_t tlsext_ellipticcurvelist_length; |
| unsigned char *tlsext_ellipticcurvelist; /* our list */ |
| #endif /* OPENSSL_NO_EC */ |
| |
| /* draft-rescorla-tls-opaque-prf-input-00.txt information to be used for handshakes */ |
| void *tlsext_opaque_prf_input; |
| size_t tlsext_opaque_prf_input_len; |
| |
| /* TLS Session Ticket extension override */ |
| TLS_SESSION_TICKET_EXT *tlsext_session_ticket; |
| |
| /* TLS Session Ticket extension callback */ |
| tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb; |
| void *tls_session_ticket_ext_cb_arg; |
| |
| /* TLS pre-shared secret session resumption */ |
| tls_session_secret_cb_fn tls_session_secret_cb; |
| void *tls_session_secret_cb_arg; |
| |
| SSL_CTX * initial_ctx; /* initial ctx, used to store sessions */ |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| /* Next protocol negotiation. For the client, this is the protocol that |
| * we sent in NextProtocol and is set when handling ServerHello |
| * extensions. |
| * |
| * For a server, this is the client's selected_protocol from |
| * NextProtocol and is set when handling the NextProtocol message, |
| * before the Finished message. */ |
| unsigned char *next_proto_negotiated; |
| unsigned char next_proto_negotiated_len; |
| #endif |
| |
| #define session_ctx initial_ctx |
| |
| STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; /* What we'll do */ |
| SRTP_PROTECTION_PROFILE *srtp_profile; /* What's been chosen */ |
| |
| unsigned int tlsext_heartbeat; /* Is use of the Heartbeat extension negotiated? |
| 0: disabled |
| 1: enabled |
| 2: enabled, but not allowed to send Requests |
| */ |
| unsigned int tlsext_hb_pending; /* Indicates if a HeartbeatRequest is in flight */ |
| unsigned int tlsext_hb_seq; /* HeartbeatRequest sequence number */ |
| |
| /* Copied from the SSL_CTX. For a server, means that we'll accept |
| * Channel IDs from clients. For a client, means that we'll advertise |
| * support. */ |
| char tlsext_channel_id_enabled; |
| /* The client's Channel ID private key. */ |
| EVP_PKEY *tlsext_channel_id_private; |
| |
| /* For a client, this contains the list of supported protocols in wire |
| * format. */ |
| unsigned char* alpn_client_proto_list; |
| unsigned alpn_client_proto_list_len; |
| #else |
| #define session_ctx ctx |
| #endif /* OPENSSL_NO_TLSEXT */ |
| |
| int renegotiate;/* 1 if we are renegotiating. |
| * 2 if we are a server and are inside a handshake |
| * (i.e. not just sending a HelloRequest) */ |
| |
| #ifndef OPENSSL_NO_DANE |
| unsigned char *tlsa_record; |
| int tlsa_witness; |
| #endif |
| }; |
| |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #include <openssl/ssl2.h> |
| #include <openssl/ssl3.h> |
| #include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */ |
| #include <openssl/dtls1.h> /* Datagram TLS */ |
| #include <openssl/ssl23.h> |
| #include <openssl/srtp.h> /* Support for the use_srtp extension */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* compatibility */ |
| #define SSL_set_app_data(s,arg) (SSL_set_ex_data(s,0,(char *)arg)) |
| #define SSL_get_app_data(s) (SSL_get_ex_data(s,0)) |
| #define SSL_SESSION_set_app_data(s,a) (SSL_SESSION_set_ex_data(s,0,(char *)a)) |
| #define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s,0)) |
| #define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx,0)) |
| #define SSL_CTX_set_app_data(ctx,arg) (SSL_CTX_set_ex_data(ctx,0,(char *)arg)) |
| |
| /* The following are the possible values for ssl->state are are |
| * used to indicate where we are up to in the SSL connection establishment. |
| * The macros that follow are about the only things you should need to use |
| * and even then, only when using non-blocking IO. |
| * It can also be useful to work out where you were when the connection |
| * failed */ |
| |
| #define SSL_ST_CONNECT 0x1000 |
| #define SSL_ST_ACCEPT 0x2000 |
| #define SSL_ST_MASK 0x0FFF |
| #define SSL_ST_INIT (SSL_ST_CONNECT|SSL_ST_ACCEPT) |
| #define SSL_ST_BEFORE 0x4000 |
| #define SSL_ST_OK 0x03 |
| #define SSL_ST_RENEGOTIATE (0x04|SSL_ST_INIT) |
| |
| #define SSL_CB_LOOP 0x01 |
| #define SSL_CB_EXIT 0x02 |
| #define SSL_CB_READ 0x04 |
| #define SSL_CB_WRITE 0x08 |
| #define SSL_CB_ALERT 0x4000 /* used in callback */ |
| #define SSL_CB_READ_ALERT (SSL_CB_ALERT|SSL_CB_READ) |
| #define SSL_CB_WRITE_ALERT (SSL_CB_ALERT|SSL_CB_WRITE) |
| #define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT|SSL_CB_LOOP) |
| #define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT|SSL_CB_EXIT) |
| #define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT|SSL_CB_LOOP) |
| #define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT|SSL_CB_EXIT) |
| #define SSL_CB_HANDSHAKE_START 0x10 |
| #define SSL_CB_HANDSHAKE_DONE 0x20 |
| |
| /* Is the SSL_connection established? */ |
| #define SSL_get_state(a) SSL_state(a) |
| #define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK) |
| #define SSL_in_init(a) ((SSL_state(a)&SSL_ST_INIT) && \ |
| !SSL_cutthrough_complete(a)) |
| #define SSL_in_before(a) (SSL_state(a)&SSL_ST_BEFORE) |
| #define SSL_in_connect_init(a) (SSL_state(a)&SSL_ST_CONNECT) |
| #define SSL_in_accept_init(a) (SSL_state(a)&SSL_ST_ACCEPT) |
| int SSL_cutthrough_complete(const SSL *s); |
| |
| /* The following 2 states are kept in ssl->rstate when reads fail, |
| * you should not need these */ |
| #define SSL_ST_READ_HEADER 0xF0 |
| #define SSL_ST_READ_BODY 0xF1 |
| #define SSL_ST_READ_DONE 0xF2 |
| |
| /* Obtain latest Finished message |
| * -- that we sent (SSL_get_finished) |
| * -- that we expected from peer (SSL_get_peer_finished). |
| * Returns length (0 == no Finished so far), copies up to 'count' bytes. */ |
| size_t SSL_get_finished(const SSL *s, void *buf, size_t count); |
| size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count); |
| |
| /* use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 3 options |
| * are 'ored' with SSL_VERIFY_PEER if they are desired */ |
| #define SSL_VERIFY_NONE 0x00 |
| #define SSL_VERIFY_PEER 0x01 |
| #define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02 |
| #define SSL_VERIFY_CLIENT_ONCE 0x04 |
| #define SSL_VERIFY_PEER_IF_NO_OBC 0x08 |
| |
| #define OpenSSL_add_ssl_algorithms() SSL_library_init() |
| #define SSLeay_add_ssl_algorithms() SSL_library_init() |
| |
| /* this is for backward compatibility */ |
| #if 0 /* NEW_SSLEAY */ |
| #define SSL_CTX_set_default_verify(a,b,c) SSL_CTX_set_verify(a,b,c) |
| #define SSL_set_pref_cipher(c,n) SSL_set_cipher_list(c,n) |
| #define SSL_add_session(a,b) SSL_CTX_add_session((a),(b)) |
| #define SSL_remove_session(a,b) SSL_CTX_remove_session((a),(b)) |
| #define SSL_flush_sessions(a,b) SSL_CTX_flush_sessions((a),(b)) |
| #endif |
| /* More backward compatibility */ |
| #define SSL_get_cipher(s) \ |
| SSL_CIPHER_get_name(SSL_get_current_cipher(s)) |
| #define SSL_get_cipher_bits(s,np) \ |
| SSL_CIPHER_get_bits(SSL_get_current_cipher(s),np) |
| #define SSL_get_cipher_version(s) \ |
| SSL_CIPHER_get_version(SSL_get_current_cipher(s)) |
| #define SSL_get_cipher_name(s) \ |
| SSL_CIPHER_get_name(SSL_get_current_cipher(s)) |
| #define SSL_get_time(a) SSL_SESSION_get_time(a) |
| #define SSL_set_time(a,b) SSL_SESSION_set_time((a),(b)) |
| #define SSL_get_timeout(a) SSL_SESSION_get_timeout(a) |
| #define SSL_set_timeout(a,b) SSL_SESSION_set_timeout((a),(b)) |
| |
| #define d2i_SSL_SESSION_bio(bp,s_id) ASN1_d2i_bio_of(SSL_SESSION,SSL_SESSION_new,d2i_SSL_SESSION,bp,s_id) |
| #define i2d_SSL_SESSION_bio(bp,s_id) ASN1_i2d_bio_of(SSL_SESSION,i2d_SSL_SESSION,bp,s_id) |
| |
| DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION) |
| |
| #define SSL_AD_REASON_OFFSET 1000 /* offset to get SSL_R_... value from SSL_AD_... */ |
| |
| /* These alert types are for SSLv3 and TLSv1 */ |
| #define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY |
| #define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */ |
| #define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC /* fatal */ |
| #define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED |
| #define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW |
| #define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE/* fatal */ |
| #define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE/* fatal */ |
| #define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not for TLS */ |
| #define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE |
| #define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE |
| #define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED |
| #define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED |
| #define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN |
| #define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */ |
| #define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */ |
| #define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */ |
| #define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR /* fatal */ |
| #define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR |
| #define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION/* fatal */ |
| #define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */ |
| #define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY/* fatal */ |
| #define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR /* fatal */ |
| #define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED |
| #define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION |
| #define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION |
| #define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE |
| #define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME |
| #define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE |
| #define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE |
| #define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY /* fatal */ |
| #define SSL_AD_INAPPROPRIATE_FALLBACK SSL3_AD_INAPPROPRIATE_FALLBACK /* fatal */ |
| |
| #define SSL_ERROR_NONE 0 |
| #define SSL_ERROR_SSL 1 |
| #define SSL_ERROR_WANT_READ 2 |
| #define SSL_ERROR_WANT_WRITE 3 |
| #define SSL_ERROR_WANT_X509_LOOKUP 4 |
| #define SSL_ERROR_SYSCALL 5 /* look at error stack/return value/errno */ |
| #define SSL_ERROR_ZERO_RETURN 6 |
| #define SSL_ERROR_WANT_CONNECT 7 |
| #define SSL_ERROR_WANT_ACCEPT 8 |
| #define SSL_ERROR_WANT_CHANNEL_ID_LOOKUP 9 |
| #define SSL_ERROR_PENDING_SESSION 11 |
| #define SSL_ERROR_PENDING_CERTIFICATE 12 |
| |
| #define SSL_CTRL_NEED_TMP_RSA 1 |
| #define SSL_CTRL_SET_TMP_RSA 2 |
| #define SSL_CTRL_SET_TMP_DH 3 |
| #define SSL_CTRL_SET_TMP_ECDH 4 |
| #define SSL_CTRL_SET_TMP_RSA_CB 5 |
| #define SSL_CTRL_SET_TMP_DH_CB 6 |
| #define SSL_CTRL_SET_TMP_ECDH_CB 7 |
| |
| #define SSL_CTRL_GET_SESSION_REUSED 8 |
| #define SSL_CTRL_GET_CLIENT_CERT_REQUEST 9 |
| #define SSL_CTRL_GET_NUM_RENEGOTIATIONS 10 |
| #define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 11 |
| #define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 12 |
| #define SSL_CTRL_GET_FLAGS 13 |
| #define SSL_CTRL_EXTRA_CHAIN_CERT 14 |
| |
| #define SSL_CTRL_SET_MSG_CALLBACK 15 |
| #define SSL_CTRL_SET_MSG_CALLBACK_ARG 16 |
| |
| /* only applies to datagram connections */ |
| #define SSL_CTRL_SET_MTU 17 |
| /* Stats */ |
| #define SSL_CTRL_SESS_NUMBER 20 |
| #define SSL_CTRL_SESS_CONNECT 21 |
| #define SSL_CTRL_SESS_CONNECT_GOOD 22 |
| #define SSL_CTRL_SESS_CONNECT_RENEGOTIATE 23 |
| #define SSL_CTRL_SESS_ACCEPT 24 |
| #define SSL_CTRL_SESS_ACCEPT_GOOD 25 |
| #define SSL_CTRL_SESS_ACCEPT_RENEGOTIATE 26 |
| #define SSL_CTRL_SESS_HIT 27 |
| #define SSL_CTRL_SESS_CB_HIT 28 |
| #define SSL_CTRL_SESS_MISSES 29 |
| #define SSL_CTRL_SESS_TIMEOUTS 30 |
| #define SSL_CTRL_SESS_CACHE_FULL 31 |
| #define SSL_CTRL_OPTIONS 32 |
| #define SSL_CTRL_MODE 33 |
| |
| #define SSL_CTRL_GET_READ_AHEAD 40 |
| #define SSL_CTRL_SET_READ_AHEAD 41 |
| #define SSL_CTRL_SET_SESS_CACHE_SIZE 42 |
| #define SSL_CTRL_GET_SESS_CACHE_SIZE 43 |
| #define SSL_CTRL_SET_SESS_CACHE_MODE 44 |
| #define SSL_CTRL_GET_SESS_CACHE_MODE 45 |
| |
| #define SSL_CTRL_GET_MAX_CERT_LIST 50 |
| #define SSL_CTRL_SET_MAX_CERT_LIST 51 |
| |
| #define SSL_CTRL_SET_MAX_SEND_FRAGMENT 52 |
| |
| /* see tls1.h for macros based on these */ |
| #ifndef OPENSSL_NO_TLSEXT |
| #define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB 53 |
| #define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG 54 |
| #define SSL_CTRL_SET_TLSEXT_HOSTNAME 55 |
| #define SSL_CTRL_SET_TLSEXT_DEBUG_CB 56 |
| #define SSL_CTRL_SET_TLSEXT_DEBUG_ARG 57 |
| #define SSL_CTRL_GET_TLSEXT_TICKET_KEYS 58 |
| #define SSL_CTRL_SET_TLSEXT_TICKET_KEYS 59 |
| #define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT 60 |
| #define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB 61 |
| #define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB_ARG 62 |
| #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB 63 |
| #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB_ARG 64 |
| #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_TYPE 65 |
| #define SSL_CTRL_GET_TLSEXT_STATUS_REQ_EXTS 66 |
| #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_EXTS 67 |
| #define SSL_CTRL_GET_TLSEXT_STATUS_REQ_IDS 68 |
| #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_IDS 69 |
| #define SSL_CTRL_GET_TLSEXT_STATUS_REQ_OCSP_RESP 70 |
| #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_OCSP_RESP 71 |
| |
| #define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB 72 |
| |
| #define SSL_CTRL_SET_TLS_EXT_SRP_USERNAME_CB 75 |
| #define SSL_CTRL_SET_SRP_VERIFY_PARAM_CB 76 |
| #define SSL_CTRL_SET_SRP_GIVE_CLIENT_PWD_CB 77 |
| |
| #define SSL_CTRL_SET_SRP_ARG 78 |
| #define SSL_CTRL_SET_TLS_EXT_SRP_USERNAME 79 |
| #define SSL_CTRL_SET_TLS_EXT_SRP_STRENGTH 80 |
| #define SSL_CTRL_SET_TLS_EXT_SRP_PASSWORD 81 |
| #ifndef OPENSSL_NO_HEARTBEATS |
| #define SSL_CTRL_TLS_EXT_SEND_HEARTBEAT 85 |
| #define SSL_CTRL_GET_TLS_EXT_HEARTBEAT_PENDING 86 |
| #define SSL_CTRL_SET_TLS_EXT_HEARTBEAT_NO_REQUESTS 87 |
| #endif |
| /* Callback for verifying audit proofs (client only) */ |
| #define SSL_CTRL_SET_TLSEXT_AUTHZ_SERVER_AUDIT_PROOF_CB 95 |
| #define SSL_CTRL_SET_TLSEXT_AUTHZ_SERVER_AUDIT_PROOF_CB_ARG 96 |
| #endif /* OPENSSL_NO_TLSEXT */ |
| |
| #define DTLS_CTRL_GET_TIMEOUT 73 |
| #define DTLS_CTRL_HANDLE_TIMEOUT 74 |
| #define DTLS_CTRL_LISTEN 75 |
| |
| #define SSL_CTRL_GET_RI_SUPPORT 76 |
| #define SSL_CTRL_CLEAR_OPTIONS 77 |
| #define SSL_CTRL_CLEAR_MODE 78 |
| |
| #define SSL_CTRL_GET_EXTRA_CHAIN_CERTS 82 |
| #define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS 83 |
| |
| #define SSL_CTRL_CHAIN 88 |
| #define SSL_CTRL_CHAIN_CERT 89 |
| |
| #define SSL_CTRL_GET_CURVES 90 |
| #define SSL_CTRL_SET_CURVES 91 |
| #define SSL_CTRL_SET_CURVES_LIST 92 |
| #define SSL_CTRL_GET_SHARED_CURVE 93 |
| #define SSL_CTRL_SET_ECDH_AUTO 94 |
| #define SSL_CTRL_SET_SIGALGS 97 |
| #define SSL_CTRL_SET_SIGALGS_LIST 98 |
| #define SSL_CTRL_CERT_FLAGS 99 |
| #define SSL_CTRL_CLEAR_CERT_FLAGS 100 |
| #define SSL_CTRL_SET_CLIENT_SIGALGS 101 |
| #define SSL_CTRL_SET_CLIENT_SIGALGS_LIST 102 |
| #define SSL_CTRL_GET_CLIENT_CERT_TYPES 103 |
| #define SSL_CTRL_SET_CLIENT_CERT_TYPES 104 |
| #define SSL_CTRL_BUILD_CERT_CHAIN 105 |
| #define SSL_CTRL_SET_VERIFY_CERT_STORE 106 |
| #define SSL_CTRL_SET_CHAIN_CERT_STORE 107 |
| #define SSL_CTRL_GET_PEER_SIGNATURE_NID 108 |
| #define SSL_CTRL_GET_SERVER_TMP_KEY 109 |
| #define SSL_CTRL_GET_RAW_CIPHERLIST 110 |
| #define SSL_CTRL_GET_EC_POINT_FORMATS 111 |
| #define SSL_CTRL_GET_TLSA_RECORD 112 |
| #define SSL_CTRL_SET_TLSA_RECORD 113 |
| #define SSL_CTRL_PULL_TLSA_RECORD 114 |
| |
| #define SSL_CTRL_GET_CHAIN_CERTS 115 |
| #define SSL_CTRL_SELECT_CURRENT_CERT 116 |
| |
| #define SSL_CTRL_CHANNEL_ID 117 |
| #define SSL_CTRL_GET_CHANNEL_ID 118 |
| #define SSL_CTRL_SET_CHANNEL_ID 119 |
| |
| #define DTLSv1_get_timeout(ssl, arg) \ |
| SSL_ctrl(ssl,DTLS_CTRL_GET_TIMEOUT,0, (void *)arg) |
| #define DTLSv1_handle_timeout(ssl) \ |
| SSL_ctrl(ssl,DTLS_CTRL_HANDLE_TIMEOUT,0, NULL) |
| #define DTLSv1_listen(ssl, peer) \ |
| SSL_ctrl(ssl,DTLS_CTRL_LISTEN,0, (void *)peer) |
| |
| #define SSL_session_reused(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL) |
| #define SSL_num_renegotiations(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_GET_NUM_RENEGOTIATIONS,0,NULL) |
| #define SSL_clear_num_renegotiations(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS,0,NULL) |
| #define SSL_total_renegotiations(ssl) \ |
| SSL_ctrl((ssl),SSL_CTRL_GET_TOTAL_RENEGOTIATIONS,0,NULL) |
| |
| #define SSL_CTX_need_tmp_RSA(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL) |
| #define SSL_CTX_set_tmp_rsa(ctx,rsa) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) |
| #define SSL_CTX_set_tmp_dh(ctx,dh) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh) |
| #define SSL_CTX_set_tmp_ecdh(ctx,ecdh) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) |
| |
| #define SSL_need_tmp_RSA(ssl) \ |
| SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL) |
| #define SSL_set_tmp_rsa(ssl,rsa) \ |
| SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) |
| #define SSL_set_tmp_dh(ssl,dh) \ |
| SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh) |
| #define SSL_set_tmp_ecdh(ssl,ecdh) \ |
| SSL_ctrl(ssl,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) |
| |
| /* SSL_enable_tls_channel_id either configures a TLS server to accept TLS client |
| * IDs from clients, or configure a client to send TLS client IDs to server. |
| * Returns 1 on success. */ |
| #define SSL_enable_tls_channel_id(s) \ |
| SSL_ctrl(s,SSL_CTRL_CHANNEL_ID,0,NULL) |
| /* SSL_set1_tls_channel_id configures a TLS client to send a TLS Channel ID to |
| * compatible servers. private_key must be a P-256 EVP_PKEY*. Returns 1 on |
| * success. */ |
| #define SSL_set1_tls_channel_id(s, private_key) \ |
| SSL_ctrl(s,SSL_CTRL_SET_CHANNEL_ID,0,(void*)private_key) |
| #define SSL_CTX_set1_tls_channel_id(ctx, private_key) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CHANNEL_ID,0,(void*)private_key) |
| /* SSL_get_tls_channel_id gets the client's TLS Channel ID from a server SSL* |
| * and copies up to the first |channel_id_len| bytes into |channel_id|. The |
| * Channel ID consists of the client's P-256 public key as an (x,y) pair where |
| * each is a 32-byte, big-endian field element. Returns 0 if the client didn't |
| * offer a Channel ID and the length of the complete Channel ID otherwise. */ |
| #define SSL_get_tls_channel_id(ctx, channel_id, channel_id_len) \ |
| SSL_ctrl(ctx,SSL_CTRL_GET_CHANNEL_ID,channel_id_len,(void*)channel_id) |
| |
| #define SSL_CTX_add_extra_chain_cert(ctx,x509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509) |
| #define SSL_CTX_get_extra_chain_certs(ctx,px509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_EXTRA_CHAIN_CERTS,0,px509) |
| #define SSL_CTX_get_extra_chain_certs_only(ctx,px509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_EXTRA_CHAIN_CERTS,1,px509) |
| #define SSL_CTX_clear_extra_chain_certs(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS,0,NULL) |
| |
| #define SSL_CTX_set0_chain(ctx,sk) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN,0,(char *)sk) |
| #define SSL_CTX_set1_chain(ctx,sk) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN,1,(char *)sk) |
| #define SSL_CTX_add0_chain_cert(ctx,x509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN_CERT,0,(char *)x509) |
| #define SSL_CTX_add1_chain_cert(ctx,x509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN_CERT,1,(char *)x509) |
| #define SSL_CTX_get0_chain_certs(ctx,px509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_CHAIN_CERTS,0,px509) |
| #define SSL_CTX_clear_chain_certs(ctx) \ |
| SSL_CTX_set0_chain(ctx,NULL) |
| #define SSL_CTX_build_cert_chain(ctx, flags) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_BUILD_CERT_CHAIN, flags, NULL) |
| #define SSL_CTX_select_current_cert(ctx,x509) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SELECT_CURRENT_CERT,0,(char *)x509) |
| |
| #define SSL_CTX_set0_verify_cert_store(ctx,st) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_VERIFY_CERT_STORE,0,(char *)st) |
| #define SSL_CTX_set1_verify_cert_store(ctx,st) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_VERIFY_CERT_STORE,1,(char *)st) |
| #define SSL_CTX_set0_chain_cert_store(ctx,st) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CHAIN_CERT_STORE,0,(char *)st) |
| #define SSL_CTX_set1_chain_cert_store(ctx,st) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CHAIN_CERT_STORE,1,(char *)st) |
| |
| #define SSL_set0_chain(ctx,sk) \ |
| SSL_ctrl(ctx,SSL_CTRL_CHAIN,0,(char *)sk) |
| #define SSL_set1_chain(ctx,sk) \ |
| SSL_ctrl(ctx,SSL_CTRL_CHAIN,1,(char *)sk) |
| #define SSL_add0_chain_cert(ctx,x509) \ |
| SSL_ctrl(ctx,SSL_CTRL_CHAIN_CERT,0,(char *)x509) |
| #define SSL_add1_chain_cert(ctx,x509) \ |
| SSL_ctrl(ctx,SSL_CTRL_CHAIN_CERT,1,(char *)x509) |
| #define SSL_get0_chain_certs(ctx,px509) \ |
| SSL_ctrl(ctx,SSL_CTRL_GET_CHAIN_CERTS,0,px509) |
| #define SSL_clear_chain_certs(ctx) \ |
| SSL_set0_chain(ctx,NULL) |
| #define SSL_build_cert_chain(s, flags) \ |
| SSL_ctrl(s,SSL_CTRL_BUILD_CERT_CHAIN, flags, NULL) |
| #define SSL_select_current_cert(ctx,x509) \ |
| SSL_ctrl(ctx,SSL_CTRL_SELECT_CURRENT_CERT,0,(char *)x509) |
| |
| #define SSL_set0_verify_cert_store(s,st) \ |
| SSL_ctrl(s,SSL_CTRL_SET_VERIFY_CERT_STORE,0,(char *)st) |
| #define SSL_set1_verify_cert_store(s,st) \ |
| SSL_ctrl(s,SSL_CTRL_SET_VERIFY_CERT_STORE,1,(char *)st) |
| #define SSL_set0_chain_cert_store(s,st) \ |
| SSL_ctrl(s,SSL_CTRL_SET_CHAIN_CERT_STORE,0,(char *)st) |
| #define SSL_set1_chain_cert_store(s,st) \ |
| SSL_ctrl(s,SSL_CTRL_SET_CHAIN_CERT_STORE,1,(char *)st) |
| |
| #define SSL_get1_curves(ctx, s) \ |
| SSL_ctrl(ctx,SSL_CTRL_GET_CURVES,0,(char *)s) |
| #define SSL_CTX_set1_curves(ctx, clist, clistlen) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CURVES,clistlen,(char *)clist) |
| #define SSL_CTX_set1_curves_list(ctx, s) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CURVES_LIST,0,(char *)s) |
| #define SSL_set1_curves(ctx, clist, clistlen) \ |
| SSL_ctrl(ctx,SSL_CTRL_SET_CURVES,clistlen,(char *)clist) |
| #define SSL_set1_curves_list(ctx, s) \ |
| SSL_ctrl(ctx,SSL_CTRL_SET_CURVES_LIST,0,(char *)s) |
| #define SSL_get_shared_curve(s, n) \ |
| SSL_ctrl(s,SSL_CTRL_GET_SHARED_CURVE,n,NULL) |
| #define SSL_CTX_set_ecdh_auto(ctx, onoff) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_ECDH_AUTO,onoff,NULL) |
| #define SSL_set_ecdh_auto(s, onoff) \ |
| SSL_ctrl(s,SSL_CTRL_SET_ECDH_AUTO,onoff,NULL) |
| |
| #define SSL_CTX_set1_sigalgs(ctx, slist, slistlen) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SIGALGS,slistlen,(int *)slist) |
| #define SSL_CTX_set1_sigalgs_list(ctx, s) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SIGALGS_LIST,0,(char *)s) |
| #define SSL_set1_sigalgs(ctx, slist, slistlen) \ |
| SSL_ctrl(ctx,SSL_CTRL_SET_SIGALGS,clistlen,(int *)slist) |
| #define SSL_set1_sigalgs_list(ctx, s) \ |
| SSL_ctrl(ctx,SSL_CTRL_SET_SIGALGS_LIST,0,(char *)s) |
| |
| #define SSL_CTX_set1_client_sigalgs(ctx, slist, slistlen) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS,slistlen,(int *)slist) |
| #define SSL_CTX_set1_client_sigalgs_list(ctx, s) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS_LIST,0,(char *)s) |
| #define SSL_set1_client_sigalgs(ctx, slist, slistlen) \ |
| SSL_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS,clistlen,(int *)slist) |
| #define SSL_set1_client_sigalgs_list(ctx, s) \ |
| SSL_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS_LIST,0,(char *)s) |
| |
| #define SSL_get0_certificate_types(s, clist) \ |
| SSL_ctrl(s, SSL_CTRL_GET_CLIENT_CERT_TYPES, 0, (char *)clist) |
| |
| #define SSL_CTX_set1_client_certificate_types(ctx, clist, clistlen) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CLIENT_CERT_TYPES,clistlen,(char *)clist) |
| #define SSL_set1_client_certificate_types(s, clist, clistlen) \ |
| SSL_ctrl(s,SSL_CTRL_SET_CLIENT_CERT_TYPES,clistlen,(char *)clist) |
| |
| #define SSL_get_peer_signature_nid(s, pn) \ |
| SSL_ctrl(s,SSL_CTRL_GET_PEER_SIGNATURE_NID,0,pn) |
| |
| #define SSL_get_server_tmp_key(s, pk) \ |
| SSL_ctrl(s,SSL_CTRL_GET_SERVER_TMP_KEY,0,pk) |
| |
| #define SSL_get0_raw_cipherlist(s, plst) \ |
| SSL_ctrl(s,SSL_CTRL_GET_RAW_CIPHERLIST,0,(char *)plst) |
| |
| #define SSL_get0_ec_point_formats(s, plst) \ |
| SSL_ctrl(s,SSL_CTRL_GET_EC_POINT_FORMATS,0,(char *)plst) |
| |
| #ifndef OPENSSL_NO_BIO |
| BIO_METHOD *BIO_f_ssl(void); |
| BIO *BIO_new_ssl(SSL_CTX *ctx,int client); |
| BIO *BIO_new_ssl_connect(SSL_CTX *ctx); |
| BIO *BIO_new_buffer_ssl_connect(SSL_CTX *ctx); |
| int BIO_ssl_copy_session_id(BIO *to,BIO *from); |
| void BIO_ssl_shutdown(BIO *ssl_bio); |
| |
| #endif |
| |
| int SSL_CTX_set_cipher_list(SSL_CTX *,const char *str); |
| int SSL_CTX_set_cipher_list_tls11(SSL_CTX *,const char *str); |
| SSL_CTX *SSL_CTX_new(const SSL_METHOD *meth); |
| void SSL_CTX_free(SSL_CTX *); |
| long SSL_CTX_set_timeout(SSL_CTX *ctx,long t); |
| long SSL_CTX_get_timeout(const SSL_CTX *ctx); |
| X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *); |
| void SSL_CTX_set_cert_store(SSL_CTX *,X509_STORE *); |
| int SSL_want(const SSL *s); |
| int SSL_clear(SSL *s); |
| |
| void SSL_CTX_flush_sessions(SSL_CTX *ctx,long tm); |
| |
| const SSL_CIPHER *SSL_get_current_cipher(const SSL *s); |
| int SSL_CIPHER_get_bits(const SSL_CIPHER *c,int *alg_bits); |
| const char * SSL_CIPHER_get_version(const SSL_CIPHER *c); |
| const char * SSL_CIPHER_get_name(const SSL_CIPHER *c); |
| unsigned long SSL_CIPHER_get_id(const SSL_CIPHER *c); |
| |
| int SSL_get_fd(const SSL *s); |
| int SSL_get_rfd(const SSL *s); |
| int SSL_get_wfd(const SSL *s); |
| const char * SSL_get_cipher_list(const SSL *s,int n); |
| char * SSL_get_shared_ciphers(const SSL *s, char *buf, int len); |
| int SSL_get_read_ahead(const SSL * s); |
| int SSL_pending(const SSL *s); |
| #ifndef OPENSSL_NO_SOCK |
| int SSL_set_fd(SSL *s, int fd); |
| int SSL_set_rfd(SSL *s, int fd); |
| int SSL_set_wfd(SSL *s, int fd); |
| #endif |
| #ifndef OPENSSL_NO_BIO |
| void SSL_set_bio(SSL *s, BIO *rbio,BIO *wbio); |
| BIO * SSL_get_rbio(const SSL *s); |
| BIO * SSL_get_wbio(const SSL *s); |
| #endif |
| int SSL_set_cipher_list(SSL *s, const char *str); |
| void SSL_set_read_ahead(SSL *s, int yes); |
| int SSL_get_verify_mode(const SSL *s); |
| int SSL_get_verify_depth(const SSL *s); |
| int (*SSL_get_verify_callback(const SSL *s))(int,X509_STORE_CTX *); |
| void SSL_set_verify(SSL *s, int mode, |
| int (*callback)(int ok,X509_STORE_CTX *ctx)); |
| void SSL_set_verify_depth(SSL *s, int depth); |
| void SSL_set_cert_cb(SSL *s, int (*cb)(SSL *ssl, void *arg), void *arg); |
| #ifndef OPENSSL_NO_RSA |
| int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); |
| #endif |
| int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len); |
| int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey); |
| int SSL_use_PrivateKey_ASN1(int pk,SSL *ssl, const unsigned char *d, long len); |
| int SSL_use_certificate(SSL *ssl, X509 *x); |
| int SSL_use_certificate_ASN1(SSL *ssl, const unsigned char *d, int len); |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| /* Set authz data for the current active cert. */ |
| int SSL_CTX_use_authz(SSL_CTX *ctx, unsigned char *authz, size_t authz_length); |
| int SSL_use_authz(SSL *ssl, unsigned char *authz, size_t authz_length); |
| /* Get the authz of type 'type' associated with the current active cert. */ |
| const unsigned char *SSL_CTX_get_authz_data(SSL_CTX *ctx, unsigned char type, |
| size_t *data_length); |
| #ifndef OPENSSL_NO_STDIO |
| int SSL_CTX_use_authz_file(SSL_CTX *ctx, const char *file); |
| int SSL_use_authz_file(SSL *ssl, const char *file); |
| #endif |
| |
| /* Set serverinfo data for the current active cert. */ |
| int SSL_CTX_use_serverinfo(SSL_CTX *ctx, const unsigned char *serverinfo, |
| size_t serverinfo_length); |
| #ifndef OPENSSL_NO_STDIO |
| int SSL_CTX_use_serverinfo_file(SSL_CTX *ctx, const char *file); |
| #endif /* NO_STDIO */ |
| |
| #endif |
| |
| #ifndef OPENSSL_NO_STDIO |
| int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); |
| int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); |
| int SSL_use_certificate_file(SSL *ssl, const char *file, int type); |
| int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type); |
| int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type); |
| int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type); |
| int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* PEM type */ |
| STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); |
| int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, |
| const char *file); |
| #ifndef OPENSSL_SYS_VMS |
| #ifndef OPENSSL_SYS_MACINTOSH_CLASSIC /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */ |
| int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, |
| const char *dir); |
| #endif |
| #endif |
| |
| #endif |
| |
| void SSL_load_error_strings(void ); |
| const char *SSL_state_string(const SSL *s); |
| const char *SSL_rstate_string(const SSL *s); |
| const char *SSL_state_string_long(const SSL *s); |
| const char *SSL_rstate_string_long(const SSL *s); |
| long SSL_SESSION_get_time(const SSL_SESSION *s); |
| long SSL_SESSION_set_time(SSL_SESSION *s, long t); |
| long SSL_SESSION_get_timeout(const SSL_SESSION *s); |
| long SSL_SESSION_set_timeout(SSL_SESSION *s, long t); |
| void SSL_copy_session_id(SSL *to,const SSL *from); |
| X509 *SSL_SESSION_get0_peer(SSL_SESSION *s); |
| int SSL_SESSION_set1_id_context(SSL_SESSION *s,const unsigned char *sid_ctx, |
| unsigned int sid_ctx_len); |
| |
| SSL_SESSION *SSL_SESSION_new(void); |
| const unsigned char *SSL_SESSION_get_id(const SSL_SESSION *s, |
| unsigned int *len); |
| unsigned int SSL_SESSION_get_compress_id(const SSL_SESSION *s); |
| #ifndef OPENSSL_NO_FP_API |
| int SSL_SESSION_print_fp(FILE *fp,const SSL_SESSION *ses); |
| #endif |
| #ifndef OPENSSL_NO_BIO |
| int SSL_SESSION_print(BIO *fp,const SSL_SESSION *ses); |
| #endif |
| #ifndef OPENSSL_NO_TLSEXT |
| unsigned char *SSL_SESSION_get_tlsext_authz_server_audit_proof(SSL_SESSION *s, |
| size_t *proof_length); |
| #endif |
| void SSL_SESSION_free(SSL_SESSION *ses); |
| int i2d_SSL_SESSION(SSL_SESSION *in,unsigned char **pp); |
| int SSL_set_session(SSL *to, SSL_SESSION *session); |
| int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c); |
| int SSL_CTX_remove_session(SSL_CTX *,SSL_SESSION *c); |
| int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB); |
| int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB); |
| int SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id, |
| unsigned int id_len); |
| SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a,const unsigned char **pp, |
| long length); |
| |
| #ifdef HEADER_X509_H |
| X509 * SSL_get_peer_certificate(const SSL *s); |
| #endif |
| |
| STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *s); |
| |
| int SSL_CTX_get_verify_mode(const SSL_CTX *ctx); |
| int SSL_CTX_get_verify_depth(const SSL_CTX *ctx); |
| int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(int,X509_STORE_CTX *); |
| void SSL_CTX_set_verify(SSL_CTX *ctx,int mode, |
| int (*callback)(int, X509_STORE_CTX *)); |
| void SSL_CTX_set_verify_depth(SSL_CTX *ctx,int depth); |
| void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *,void *), void *arg); |
| void SSL_CTX_set_cert_cb(SSL_CTX *c, int (*cb)(SSL *ssl, void *arg), void *arg); |
| #ifndef OPENSSL_NO_RSA |
| int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); |
| #endif |
| int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const unsigned char *d, long len); |
| int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey); |
| int SSL_CTX_use_PrivateKey_ASN1(int pk,SSL_CTX *ctx, |
| const unsigned char *d, long len); |
| int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x); |
| int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const unsigned char *d); |
| |
| void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb); |
| void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *u); |
| |
| int SSL_CTX_check_private_key(const SSL_CTX *ctx); |
| int SSL_check_private_key(const SSL *ctx); |
| |
| int SSL_CTX_set_session_id_context(SSL_CTX *ctx,const unsigned char *sid_ctx, |
| unsigned int sid_ctx_len); |
| |
| SSL * SSL_new(SSL_CTX *ctx); |
| int SSL_set_session_id_context(SSL *ssl,const unsigned char *sid_ctx, |
| unsigned int sid_ctx_len); |
| |
| int SSL_CTX_set_purpose(SSL_CTX *s, int purpose); |
| int SSL_set_purpose(SSL *s, int purpose); |
| int SSL_CTX_set_trust(SSL_CTX *s, int trust); |
| int SSL_set_trust(SSL *s, int trust); |
| |
| int SSL_CTX_set1_param(SSL_CTX *ctx, X509_VERIFY_PARAM *vpm); |
| int SSL_set1_param(SSL *ssl, X509_VERIFY_PARAM *vpm); |
| |
| X509_VERIFY_PARAM *SSL_CTX_get0_param(SSL_CTX *ctx); |
| X509_VERIFY_PARAM *SSL_get0_param(SSL *ssl); |
| |
| void SSL_certs_clear(SSL *s); |
| void SSL_free(SSL *ssl); |
| int SSL_accept(SSL *ssl); |
| int SSL_connect(SSL *ssl); |
| int SSL_read(SSL *ssl,void *buf,int num); |
| int SSL_peek(SSL *ssl,void *buf,int num); |
| int SSL_write(SSL *ssl,const void *buf,int num); |
| long SSL_ctrl(SSL *ssl,int cmd, long larg, void *parg); |
| long SSL_callback_ctrl(SSL *, int, void (*)(void)); |
| long SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, void *parg); |
| long SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)(void)); |
| |
| int SSL_get_error(const SSL *s,int ret_code); |
| const char *SSL_get_version(const SSL *s); |
| |
| int SSL_CIPHER_is_AES(const SSL_CIPHER *c); |
| int SSL_CIPHER_has_MD5_HMAC(const SSL_CIPHER *c); |
| int SSL_CIPHER_is_AESGCM(const SSL_CIPHER *c); |
| int SSL_CIPHER_is_CHACHA20POLY1305(const SSL_CIPHER *c); |
| |
| /* This sets the 'default' SSL version that SSL_new() will create */ |
| int SSL_CTX_set_ssl_version(SSL_CTX *ctx, const SSL_METHOD *meth); |
| |
| const SSL_METHOD *SSLv3_method(void); /* SSLv3 */ |
| const SSL_METHOD *SSLv3_server_method(void); /* SSLv3 */ |
| const SSL_METHOD *SSLv3_client_method(void); /* SSLv3 */ |
| |
| const SSL_METHOD *SSLv23_method(void); /* SSLv3 but can rollback to v2 */ |
| const SSL_METHOD *SSLv23_server_method(void); /* SSLv3 but can rollback to v2 */ |
| const SSL_METHOD *SSLv23_client_method(void); /* SSLv3 but can rollback to v2 */ |
| |
| const SSL_METHOD *TLSv1_method(void); /* TLSv1.0 */ |
| const SSL_METHOD *TLSv1_server_method(void); /* TLSv1.0 */ |
| const SSL_METHOD *TLSv1_client_method(void); /* TLSv1.0 */ |
| |
| const SSL_METHOD *TLSv1_1_method(void); /* TLSv1.1 */ |
| const SSL_METHOD *TLSv1_1_server_method(void); /* TLSv1.1 */ |
| const SSL_METHOD *TLSv1_1_client_method(void); /* TLSv1.1 */ |
| |
| const SSL_METHOD *TLSv1_2_method(void); /* TLSv1.2 */ |
| const SSL_METHOD *TLSv1_2_server_method(void); /* TLSv1.2 */ |
| const SSL_METHOD *TLSv1_2_client_method(void); /* TLSv1.2 */ |
| |
| |
| const SSL_METHOD *DTLSv1_method(void); /* DTLSv1.0 */ |
| const SSL_METHOD *DTLSv1_server_method(void); /* DTLSv1.0 */ |
| const SSL_METHOD *DTLSv1_client_method(void); /* DTLSv1.0 */ |
| |
| const SSL_METHOD *DTLSv1_2_method(void); /* DTLSv1.2 */ |
| const SSL_METHOD *DTLSv1_2_server_method(void); /* DTLSv1.2 */ |
| const SSL_METHOD *DTLSv1_2_client_method(void); /* DTLSv1.2 */ |
| |
| const SSL_METHOD *DTLS_method(void); /* DTLS 1.0 and 1.2 */ |
| const SSL_METHOD *DTLS_server_method(void); /* DTLS 1.0 and 1.2 */ |
| const SSL_METHOD *DTLS_client_method(void); /* DTLS 1.0 and 1.2 */ |
| |
| STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s); |
| |
| int SSL_do_handshake(SSL *s); |
| int SSL_renegotiate(SSL *s); |
| int SSL_renegotiate_abbreviated(SSL *s); |
| int SSL_renegotiate_pending(SSL *s); |
| int SSL_shutdown(SSL *s); |
| |
| const SSL_METHOD *SSL_CTX_get_ssl_method(SSL_CTX *ctx); |
| const SSL_METHOD *SSL_get_ssl_method(SSL *s); |
| int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method); |
| const char *SSL_alert_type_string_long(int value); |
| const char *SSL_alert_type_string(int value); |
| const char *SSL_alert_desc_string_long(int value); |
| const char *SSL_alert_desc_string(int value); |
| |
| void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list); |
| void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); |
| STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s); |
| STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(const SSL_CTX *s); |
| int SSL_add_client_CA(SSL *ssl,X509 *x); |
| int SSL_CTX_add_client_CA(SSL_CTX *ctx,X509 *x); |
| |
| void SSL_get_client_certificate_types(const SSL *s, const unsigned char **ctype, |
| size_t *ctype_num); |
| |
| void SSL_set_connect_state(SSL *s); |
| void SSL_set_accept_state(SSL *s); |
| |
| long SSL_get_default_timeout(const SSL *s); |
| |
| int SSL_library_init(void ); |
| |
| const char *SSL_CIPHER_description(const SSL_CIPHER *,char *buf,int size); |
| STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk); |
| |
| X509 *SSL_get_certificate(const SSL *ssl); |
| /* EVP_PKEY */ struct evp_pkey_st *SSL_get_privatekey(const SSL *ssl); |
| |
| X509 *SSL_CTX_get0_certificate(const SSL_CTX *ctx); |
| EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx); |
| |
| void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx,int mode); |
| int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx); |
| void SSL_set_quiet_shutdown(SSL *ssl,int mode); |
| int SSL_get_quiet_shutdown(const SSL *ssl); |
| void SSL_set_shutdown(SSL *ssl,int mode); |
| int SSL_get_shutdown(const SSL *ssl); |
| int SSL_version(const SSL *ssl); |
| int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx); |
| int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile, |
| const char *CApath); |
| #define SSL_get0_session SSL_get_session /* just peek at pointer */ |
| SSL_SESSION *SSL_get_session(const SSL *ssl); |
| SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */ |
| SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl); |
| SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX* ctx); |
| void SSL_set_info_callback(SSL *ssl, |
| void (*cb)(const SSL *ssl,int type,int val)); |
| void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl,int type,int val); |
| int SSL_state(const SSL *ssl); |
| void SSL_set_state(SSL *ssl, int state); |
| |
| void SSL_set_verify_result(SSL *ssl,long v); |
| long SSL_get_verify_result(const SSL *ssl); |
| |
| int SSL_set_ex_data(SSL *ssl,int idx,void *data); |
| void *SSL_get_ex_data(const SSL *ssl,int idx); |
| int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, |
| CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); |
| |
| int SSL_SESSION_set_ex_data(SSL_SESSION *ss,int idx,void *data); |
| void *SSL_SESSION_get_ex_data(const SSL_SESSION *ss,int idx); |
| int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, |
| CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); |
| |
| int SSL_CTX_set_ex_data(SSL_CTX *ssl,int idx,void *data); |
| void *SSL_CTX_get_ex_data(const SSL_CTX *ssl,int idx); |
| int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, |
| CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); |
| |
| int SSL_get_ex_data_X509_STORE_CTX_idx(void ); |
| |
| #define SSL_CTX_sess_set_cache_size(ctx,t) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_SIZE,t,NULL) |
| #define SSL_CTX_sess_get_cache_size(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_SIZE,0,NULL) |
| #define SSL_CTX_set_session_cache_mode(ctx,m) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_MODE,m,NULL) |
| #define SSL_CTX_get_session_cache_mode(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_MODE,0,NULL) |
| |
| #define SSL_CTX_get_default_read_ahead(ctx) SSL_CTX_get_read_ahead(ctx) |
| #define SSL_CTX_set_default_read_ahead(ctx,m) SSL_CTX_set_read_ahead(ctx,m) |
| #define SSL_CTX_get_read_ahead(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL) |
| #define SSL_CTX_set_read_ahead(ctx,m) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL) |
| #define SSL_CTX_get_max_cert_list(ctx) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) |
| #define SSL_CTX_set_max_cert_list(ctx,m) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) |
| #define SSL_get_max_cert_list(ssl) \ |
| SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) |
| #define SSL_set_max_cert_list(ssl,m) \ |
| SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) |
| |
| #define SSL_CTX_set_max_send_fragment(ctx,m) \ |
| SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL) |
| #define SSL_set_max_send_fragment(ssl,m) \ |
| SSL_ctrl(ssl,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL) |
| |
| /* NB: the keylength is only applicable when is_export is true */ |
| #ifndef OPENSSL_NO_RSA |
| void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx, |
| RSA *(*cb)(SSL *ssl,int is_export, |
| int keylength)); |
| |
| void SSL_set_tmp_rsa_callback(SSL *ssl, |
| RSA *(*cb)(SSL *ssl,int is_export, |
| int keylength)); |
| #endif |
| #ifndef OPENSSL_NO_DH |
| void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx, |
| DH *(*dh)(SSL *ssl,int is_export, |
| int keylength)); |
| void SSL_set_tmp_dh_callback(SSL *ssl, |
| DH *(*dh)(SSL *ssl,int is_export, |
| int keylength)); |
| #endif |
| #ifndef OPENSSL_NO_ECDH |
| void SSL_CTX_set_tmp_ecdh_callback(SSL_CTX *ctx, |
| EC_KEY *(*ecdh)(SSL *ssl,int is_export, |
| int keylength)); |
| void SSL_set_tmp_ecdh_callback(SSL *ssl, |
| EC_KEY *(*ecdh)(SSL *ssl,int is_export, |
| int keylength)); |
| #endif |
| |
| const void *SSL_get_current_compression(SSL *s); |
| const void *SSL_get_current_expansion(SSL *s); |
| const char *SSL_COMP_get_name(const void *comp); |
| void *SSL_COMP_get_compression_methods(void); |
| int SSL_COMP_add_compression_method(int id,void *cm); |
| |
| const SSL_CIPHER *SSL_CIPHER_find(SSL *ssl, const unsigned char *ptr); |
| |
| /* TLS extensions functions */ |
| int SSL_set_session_ticket_ext(SSL *s, void *ext_data, int ext_len); |
| |
| int SSL_set_session_ticket_ext_cb(SSL *s, tls_session_ticket_ext_cb_fn cb, |
| void *arg); |
| |
| /* Pre-shared secret session resumption functions */ |
| int SSL_set_session_secret_cb(SSL *s, tls_session_secret_cb_fn tls_session_secret_cb, void *arg); |
| |
| void SSL_set_debug(SSL *s, int debug); |
| int SSL_cache_hit(SSL *s); |
| int SSL_is_server(SSL *s); |
| |
| /* SSL_get_structure_sizes returns the sizes of the SSL, SSL_CTX and |
| * SSL_SESSION structures so that a test can ensure that outside code agrees on |
| * these values. */ |
| void SSL_get_structure_sizes(size_t* ssl_size, size_t* ssl_ctx_size, |
| size_t* ssl_session_size); |
| |
| SSL_CONF_CTX *SSL_CONF_CTX_new(void); |
| int SSL_CONF_CTX_finish(SSL_CONF_CTX *cctx); |
| void SSL_CONF_CTX_free(SSL_CONF_CTX *cctx); |
| unsigned int SSL_CONF_CTX_set_flags(SSL_CONF_CTX *cctx, unsigned int flags); |
| unsigned int SSL_CONF_CTX_clear_flags(SSL_CONF_CTX *cctx, unsigned int flags); |
| int SSL_CONF_CTX_set1_prefix(SSL_CONF_CTX *cctx, const char *pre); |
| |
| void SSL_CONF_CTX_set_ssl(SSL_CONF_CTX *cctx, SSL *ssl); |
| void SSL_CONF_CTX_set_ssl_ctx(SSL_CONF_CTX *cctx, SSL_CTX *ctx); |
| |
| int SSL_CONF_cmd(SSL_CONF_CTX *cctx, const char *cmd, const char *value); |
| int SSL_CONF_cmd_argv(SSL_CONF_CTX *cctx, int *pargc, char ***pargv); |
| int SSL_CONF_cmd_value_type(SSL_CONF_CTX *cctx, const char *cmd); |
| |
| #ifndef OPENSSL_NO_SSL_TRACE |
| void SSL_trace(int write_p, int version, int content_type, |
| const void *buf, size_t len, SSL *ssl, void *arg); |
| const char *SSL_CIPHER_standard_name(const SSL_CIPHER *c); |
| #endif |
| |
| /* BEGIN ERROR CODES */ |
| /* The following lines are auto generated by the script mkerr.pl. Any changes |
| * made after this point may be overwritten when the script is next run. |
| */ |
| void ERR_load_SSL_strings(void); |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| #define SSL_F_SSL_use_PrivateKey_file 100 |
| #define SSL_F_dtls1_write_app_data_bytes 101 |
| #define SSL_F_ssl_cipher_process_rulestr 102 |
| #define SSL_F_SSL_set_session_id_context 103 |
| #define SSL_F_SSL_read 104 |
| #define SSL_F_ssl_cert_new 105 |
| #define SSL_F_dtls1_heartbeat 106 |
| #define SSL_F_ssl3_digest_cached_records 107 |
| #define SSL_F_SSL_set_wfd 108 |
| #define SSL_F_SSL_CTX_use_serverinfo 109 |
| #define SSL_F_ssl_set_pkey 110 |
| #define SSL_F_SSL_CTX_use_certificate 111 |
| #define SSL_F_dtls1_read_bytes 112 |
| #define SSL_F_ssl23_write 113 |
| #define SSL_F_ssl3_check_client_hello 114 |
| #define SSL_F_SSL_use_certificate_ASN1 115 |
| #define SSL_F_ssl_verify_cert_chain 116 |
| #define SSL_F_ssl_parse_serverhello_renegotiate_ext 117 |
| #define SSL_F_ssl_undefined_const_function 118 |
| #define SSL_F_ssl3_get_server_certificate 119 |
| #define SSL_F_tls1_get_server_supplemental_data 120 |
| #define SSL_F_dtls1_buffer_record 121 |
| #define SSL_F_ssl_prepare_clienthello_tlsext 122 |
| #define SSL_F_ssl3_get_server_hello 123 |
| #define SSL_F_ssl3_send_client_key_exchange 124 |
| #define SSL_F_ssl3_write_bytes 125 |
| #define SSL_F_SSL_use_RSAPrivateKey_file 126 |
| #define SSL_F_ssl_bad_method 127 |
| #define SSL_F_ssl3_connect 128 |
| #define SSL_F_dtls1_connect 129 |
| #define SSL_F_SSL_use_RSAPrivateKey 130 |
| #define SSL_F_tls1_PRF 131 |
| #define SSL_F_ssl_bytes_to_cipher_list 132 |
| #define SSL_F_ssl3_do_change_cipher_spec 133 |
| #define SSL_F_SSL_SESSION_set1_id_context 134 |
| #define SSL_F_ssl_add_serverhello_tlsext 135 |
| #define SSL_F_read_authz 136 |
| #define SSL_F_ssl3_get_client_hello 137 |
| #define SSL_F_ssl3_get_certificate_request 138 |
| #define SSL_F_authz_find_data 139 |
| #define SSL_F_ssl_add_cert_to_buf 140 |
| #define SSL_F_ssl_add_serverhello_renegotiate_ext 141 |
| #define SSL_F_ssl3_get_message 142 |
| #define SSL_F_ssl_check_srvr_ecc_cert_and_alg 143 |
| #define SSL_F_ssl_parse_clienthello_tlsext 144 |
| #define SSL_F_SSL_add_file_cert_subjects_to_stack 145 |
| #define SSL_F_ssl3_ctx_ctrl 146 |
| #define SSL_F_ssl3_get_record 147 |
| #define SSL_F_SSL_CTX_use_RSAPrivateKey 148 |
| #define SSL_F_SSL_use_certificate_file 149 |
| #define SSL_F_SSL_CTX_use_serverinfo_file 150 |
| #define SSL_F_SSL_load_client_CA_file 151 |
| #define SSL_F_dtls1_preprocess_fragment 152 |
| #define SSL_F_SSL_CTX_check_private_key 153 |
| #define SSL_F_ssl3_get_cert_status 154 |
| #define SSL_F_printf 155 |
| #define SSL_F_SSL_CTX_new 156 |
| #define SSL_F_ssl23_accept 157 |
| #define SSL_F_SSL_use_authz 158 |
| #define SSL_F_ssl_undefined_function 159 |
| #define SSL_F_dtls1_send_hello_verify_request 160 |
| #define SSL_F_ssl_build_cert_chain 161 |
| #define SSL_F_SSL_SESSION_print_fp 162 |
| #define SSL_F_tls1_change_cipher_state 163 |
| #define SSL_F_tls12_check_peer_sigalg 164 |
| #define SSL_F_ssl_sess_cert_new 165 |
| #define SSL_F_ssl3_read_bytes 166 |
| #define SSL_F_dtls1_get_hello_verify 167 |
| #define SSL_F_tls1_cert_verify_mac 168 |
| #define SSL_F_ssl23_client_hello 169 |
| #define SSL_F_SSL_shutdown 170 |
| #define SSL_F_ssl_init_wbio_buffer 171 |
| #define SSL_F_SSL_use_certificate 172 |
| #define SSL_F_SSL_CTX_use_RSAPrivateKey_ASN1 173 |
| #define SSL_F_ssl_set_authz 174 |
| #define SSL_F_ssl23_peek 175 |
| #define SSL_F_SSL_use_psk_identity_hint 176 |
| #define SSL_F_ssl3_get_cert_verify 177 |
| #define SSL_F_ssl_ctx_make_profiles 178 |
| #define SSL_F_ssl_add_clienthello_use_srtp_ext 179 |
| #define SSL_F_ssl3_get_client_key_exchange 180 |
| #define SSL_F_do_ssl3_write 181 |
| #define SSL_F_ssl3_handshake_mac 182 |
| #define SSL_F_tls1_setup_key_block 183 |
| #define SSL_F_SSL_set_fd 184 |
| #define SSL_F_SSL_check_private_key 185 |
| #define SSL_F_ssl3_send_client_verify 186 |
| #define SSL_F_ssl3_write_pending 187 |
| #define SSL_F_ssl_cert_inst 188 |
| #define SSL_F_ssl3_change_cipher_state 189 |
| #define SSL_F_ssl23_get_server_hello 190 |
| #define SSL_F_SSL_write 191 |
| #define SSL_F_ssl_get_sign_pkey 192 |
| #define SSL_F_ssl_set_cert 193 |
| #define SSL_F_SSL_CTX_use_RSAPrivateKey_file 194 |
| #define SSL_F_SSL_CTX_use_authz 195 |
| #define SSL_F_ssl_get_new_session 196 |
| #define SSL_F_SSL_set_session_ticket_ext 197 |
| #define SSL_F_ssl_add_clienthello_renegotiate_ext 198 |
| #define SSL_F_ssl3_send_server_key_exchange 199 |
| #define SSL_F_fprintf 200 |
| #define SSL_F_ssl3_get_new_session_ticket 201 |
| #define SSL_F_SSL_CTX_use_certificate_ASN1 202 |
| #define SSL_F_ssl_add_cert_chain 203 |
| #define SSL_F_ssl_create_cipher_list 204 |
| #define SSL_F_ssl3_callback_ctrl 205 |
| #define SSL_F_SSL_CTX_set_cipher_list 206 |
| #define SSL_F_ssl3_send_certificate_request 207 |
| #define SSL_F_SSL_use_PrivateKey_ASN1 208 |
| #define SSL_F_SSL_CTX_use_certificate_chain_file 209 |
| #define SSL_F_SSL_SESSION_new 210 |
| #define SSL_F_check_suiteb_cipher_list 211 |
| #define SSL_F_ssl_scan_clienthello_tlsext 212 |
| #define SSL_F_ssl3_client_hello 213 |
| #define SSL_F_SSL_use_RSAPrivateKey_ASN1 214 |
| #define SSL_F_ssl3_ctrl 215 |
| #define SSL_F_ssl3_setup_write_buffer 216 |
| #define SSL_F_ssl_parse_serverhello_use_srtp_ext 217 |
| #define SSL_F_ssl3_get_key_exchange 218 |
| #define SSL_F_ssl3_send_server_hello 219 |
| #define SSL_F_SSL_add_dir_cert_subjects_to_stack 220 |
| #define SSL_F_ssl_check_serverhello_tlsext 221 |
| #define SSL_F_ssl3_get_server_done 222 |
| #define SSL_F_ssl3_check_cert_and_algorithm 223 |
| #define SSL_F_do_dtls1_write 224 |
| #define SSL_F_dtls1_check_timeout_num 225 |
| #define SSL_F_tls1_export_keying_material 226 |
| #define SSL_F_SSL_CTX_set_session_id_context 227 |
| #define SSL_F_SSL_set_rfd 228 |
| #define SSL_F_ssl3_send_client_certificate 229 |
| #define SSL_F_ssl_cert_dup 230 |
| #define SSL_F_dtls1_process_record 231 |
| #define SSL_F_ssl_new 232 |
| #define SSL_F_ssl_get_server_cert_index 233 |
| #define SSL_F_tls1_send_server_supplemental_data 234 |
| #define SSL_F_D2I_SSL_SESSION 235 |
| #define SSL_F_ssl_cipher_strength_sort 236 |
| #define SSL_F_dtls1_get_message 237 |
| #define SSL_F_ssl23_connect 238 |
| #define SSL_F_tls1_heartbeat 239 |
| #define SSL_F_ssl3_read_n 240 |
| #define SSL_F_ssl_get_prev_session 241 |
| #define SSL_F_ssl_parse_clienthello_renegotiate_ext 242 |
| #define SSL_F_ssl3_setup_read_buffer 243 |
| #define SSL_F_SSL_CTX_set_ssl_version 244 |
| #define SSL_F_SSL_peek 245 |
| #define SSL_F_ssl3_send_server_certificate 246 |
| #define SSL_F_SSL_do_handshake 247 |
| #define SSL_F_ssl_undefined_void_function 248 |
| #define SSL_F_ssl_add_serverhello_use_srtp_ext 249 |
| #define SSL_F_fclose 250 |
| #define SSL_F_SSL_use_PrivateKey 251 |
| #define SSL_F_SSL_CTX_use_certificate_file 252 |
| #define SSL_F_SSL_CTX_use_PrivateKey 253 |
| #define SSL_F_SSL_set_session 254 |
| #define SSL_F_SSL_CTX_use_psk_identity_hint 255 |
| #define SSL_F_ssl_scan_serverhello_tlsext 256 |
| #define SSL_F_ssl23_read 257 |
| #define SSL_F_ssl_parse_clienthello_use_srtp_ext 258 |
| #define SSL_F_ssl3_accept 259 |
| #define SSL_F_ssl3_get_client_certificate 260 |
| #define SSL_F_SSL_CTX_use_PrivateKey_ASN1 261 |
| #define SSL_F_dtls1_get_message_fragment 262 |
| #define SSL_F_SSL_clear 263 |
| #define SSL_F_dtls1_accept 264 |
| #define SSL_F_ssl3_get_next_proto 265 |
| #define SSL_F_SSL_set_cipher_list 266 |
| #define SSL_F_ssl_add_clienthello_tlsext 267 |
| #define SSL_F_ssl23_get_client_hello 268 |
| #define SSL_F_SSL_CTX_use_PrivateKey_file 269 |
| #define SSL_F_ssl3_get_finished 270 |
| #define SSL_F_ssl3_generate_key_block 271 |
| #define SSL_F_ssl3_setup_key_block 272 |
| #define SSL_F_SSL_new 273 |
| #define SSL_F_ssl_parse_serverhello_tlsext 274 |
| #define SSL_F_ssl3_get_channel_id 275 |
| #define SSL_F_ssl3_send_channel_id 276 |
| #define SSL_F_SSL_CTX_set_cipher_list_tls11 277 |
| #define SSL_F_tls1_change_cipher_state_cipher 278 |
| #define SSL_F_tls1_change_cipher_state_aead 279 |
| #define SSL_F_tls1_aead_ctx_init 280 |
| #define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 100 |
| #define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 101 |
| #define SSL_R_INVALID_NULL_CMD_NAME 102 |
| #define SSL_R_BAD_RSA_DECRYPT 103 |
| #define SSL_R_NO_SHARED_CIPHER 104 |
| #define SSL_R_BAD_PSK_IDENTITY_HINT_LENGTH 105 |
| #define SSL_R_SSL_HANDSHAKE_FAILURE 106 |
| #define SSL_R_INVALID_TICKET_KEYS_LENGTH 107 |
| #define SSL_R_PEER_ERROR 108 |
| #define SSL_R_ECC_CERT_NOT_FOR_SIGNING 109 |
| #define SSL_R_INCONSISTENT_COMPRESSION 110 |
| #define SSL_R_BAD_HELLO_REQUEST 111 |
| #define SSL_R_NULL_SSL_METHOD_PASSED 112 |
| #define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 113 |
| #define SSL_R_BAD_ECDSA_SIGNATURE 114 |
| #define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION 115 |
| #define SSL_R_BAD_DH_PUB_KEY_LENGTH 116 |
| #define SSL_R_COMPRESSED_LENGTH_TOO_LONG 117 |
| #define SSL_R_APP_DATA_IN_HANDSHAKE 118 |
| #define SSL_R_NO_PEM_EXTENSIONS 119 |
| #define SSL_R_BAD_SRP_B_LENGTH 120 |
| #define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 121 |
| #define SSL_R_UNABLE_TO_DECODE_DH_CERTS 122 |
| #define SSL_R_MISSING_SRP_PARAM 123 |
| #define SSL_R_MISSING_RSA_SIGNING_CERT 124 |
| #define SSL_R_MISSING_DSA_SIGNING_CERT 125 |
| #define SSL_R_ONLY_TLS_1_2_ALLOWED_IN_SUITEB_MODE 126 |
| #define SSL_R_UNEXPECTED_RECORD 127 |
| #define SSL_R_BAD_DIGEST_LENGTH 128 |
| #define SSL_R_READ_TIMEOUT_EXPIRED 129 |
| #define SSL_R_KRB5_C_GET_CRED 130 |
| #define SSL_R_NULL_SSL_CTX 131 |
| #define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 132 |
| #define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 133 |
| #define SSL_R_ERROR_GENERATING_TMP_RSA_KEY 134 |
| #define SSL_R_SSL3_SESSION_ID_TOO_LONG 135 |
| #define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 136 |
| #define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO 137 |
| #define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 138 |
| #define SSL_R_COOKIE_MISMATCH 139 |
| #define SSL_R_UNINITIALIZED 140 |
| #define SSL_R_BAD_CHANGE_CIPHER_SPEC 141 |
| #define SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES 142 |
| #define SSL_R_BAD_SRP_G_LENGTH 143 |
| #define SSL_R_NO_CERTIFICATE_ASSIGNED 144 |
| #define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 145 |
| #define SSL_R_PEM_NAME_TOO_SHORT 146 |
| #define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 147 |
| #define SSL_R_PROTOCOL_IS_SHUTDOWN 148 |
| #define SSL_R_UNABLE_TO_FIND_SSL_METHOD 149 |
| #define SSL_R_WRONG_MESSAGE_TYPE 150 |
| #define SSL_R_BAD_RSA_MODULUS_LENGTH 151 |
| #define SSL_R_PUBLIC_KEY_IS_NOT_RSA 152 |
| #define SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE 153 |
| #define SSL_R_NO_CLIENT_CERT_RECEIVED 154 |
| #define SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST 155 |
| #define SSL_R_CERT_LENGTH_MISMATCH 156 |
| #define SSL_R_MISSING_EXPORT_TMP_DH_KEY 157 |
| #define SSL_R_DUPLICATE_COMPRESSION_ID 158 |
| #define SSL_R_SSL3_EXT_INVALID_ECPOINTFORMAT 159 |
| #define SSL_R_REUSE_CIPHER_LIST_NOT_ZERO 160 |
| #define SSL_R_DATA_LENGTH_TOO_LONG 161 |
| #define SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER 162 |
| #define SSL_R_WRONG_SIGNATURE_LENGTH 163 |
| #define SSL_R_SSL2_CONNECTION_ID_TOO_LONG 164 |
| #define SSL_R_WRONG_VERSION_NUMBER 165 |
| #define SSL_R_RECORD_TOO_LARGE 166 |
| #define SSL_R_BIO_NOT_SET 167 |
| #define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES 168 |
| #define SSL_R_TLSV1_ALERT_DECODE_ERROR 169 |
| #define SSL_R_UNKNOWN_PKEY_TYPE 170 |
| #define SSL_R_CIPHER_CODE_WRONG_LENGTH 171 |
| #define SSL_R_SSL_SESSION_ID_CONFLICT 172 |
| #define SSL_R_INVALID_COMMAND 173 |
| #define SSL_R_NO_PROTOCOLS_AVAILABLE 174 |
| #define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 175 |
| #define SSL_R_LIBRARY_BUG 176 |
| #define SSL_R_UNSUPPORTED_CIPHER 177 |
| #define SSL_R_REUSE_CERT_TYPE_NOT_ZERO 178 |
| #define SSL_R_WRONG_SIGNATURE_TYPE 179 |
| #define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST 180 |
| #define SSL_R_PSK_NO_SERVER_CB 181 |
| #define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG 182 |
| #define SSL_R_INVALID_TRUST 183 |
| #define SSL_R_PARSE_TLSEXT 184 |
| #define SSL_R_NO_SRTP_PROFILES 185 |
| #define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 186 |
| #define SSL_R_UNKNOWN_STATE 187 |
| #define SSL_R_UNKNOWN_CERTIFICATE_TYPE 188 |
| #define SSL_R_WRONG_CIPHER_RETURNED 189 |
| #define SSL_R_BAD_DH_G_LENGTH 190 |
| #define SSL_R_BAD_ALERT_RECORD 191 |
| #define SSL_R_CIPHER_TABLE_SRC_ERROR 192 |
| #define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 193 |
| #define SSL_R_UNKNOWN_REMOTE_ERROR_TYPE 194 |
| #define SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE 195 |
| #define SSL_R_MESSAGE_TOO_LONG 196 |
| #define SSL_R_BAD_RSA_SIGNATURE 197 |
| #define SSL_R_X509_LIB 198 |
| #define SSL_R_BAD_SRP_N_LENGTH 199 |
| #define SSL_R_BAD_SSL_SESSION_ID_LENGTH 200 |
| #define SSL_R_UNKNOWN_CIPHER_TYPE 201 |
| #define SSL_R_BAD_DH_P_LENGTH 202 |
| #define SSL_R_MISSING_DH_RSA_CERT 203 |
| #define SSL_R_NO_METHOD_SPECIFIED 204 |
| #define SSL_R_EMPTY_SRTP_PROTECTION_PROFILE_LIST 205 |
| #define SSL_R_MULTIPLE_SGC_RESTARTS 206 |
| #define SSL_R_UNABLE_TO_DECODE_ECDH_CERTS 207 |
| #define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 208 |
| #define SSL_R_SSL3_EXT_INVALID_SERVERNAME 209 |
| #define SSL_R_BAD_SRP_S_LENGTH 210 |
| #define SSL_R_MISSING_TMP_RSA_KEY 211 |
| #define SSL_R_PSK_NO_CLIENT_CB 212 |
| #define SSL_R_PEM_NAME_BAD_PREFIX 213 |
| #define SSL_R_BAD_CHECKSUM 214 |
| #define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 215 |
| #define SSL_R_NO_CIPHER_MATCH 216 |
| #define SSL_R_MISSING_TMP_DH_KEY 217 |
| #define SSL_R_UNSUPPORTED_STATUS_TYPE 218 |
| #define SSL_R_UNKNOWN_AUTHZ_DATA_TYPE 219 |
| #define SSL_R_CONNECTION_TYPE_NOT_SET 220 |
| #define SSL_R_MISSING_DH_KEY 221 |
| #define SSL_R_CHANNEL_ID_NOT_P256 222 |
| #define SSL_R_UNKNOWN_SUPPLEMENTAL_DATA_TYPE 223 |
| #define SSL_R_UNKNOWN_PROTOCOL 224 |
| #define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 225 |
| #define SSL_R_KRB5_S_TKT_SKEW 226 |
| #define SSL_R_PUBLIC_KEY_NOT_RSA 227 |
| #define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 228 |
| #define SSL_R_GOST_NOT_SUPPORTED 229 |
| #define SSL_R_KRB5_C_CC_PRINC 230 |
| #define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 231 |
| #define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 232 |
| #define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 233 |
| #define SSL_R_INVALID_PURPOSE 234 |
| #define SSL_R_KRB5_C_MK_REQ 235 |
| #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 236 |
| #define SSL_R_BAD_SRTP_MKI_VALUE 237 |
| #define SSL_R_EVP_DIGESTSIGNINIT_FAILED 238 |
| #define SSL_R_DIGEST_CHECK_FAILED 239 |
| #define SSL_R_BAD_SRP_A_LENGTH 240 |
| #define SSL_R_SERVERHELLO_TLSEXT 241 |
| #define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 242 |
| #define SSL_R_NO_CIPHERS_AVAILABLE 243 |
| #define SSL_R_COMPRESSION_FAILURE 244 |
| #define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 245 |
| #define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 246 |
| #define SSL_R_BAD_RSA_ENCRYPT 247 |
| #define SSL_R_EXCESSIVE_MESSAGE_SIZE 248 |
| #define SSL_R_INVALID_COMPRESSION_ALGORITHM 249 |
| #define SSL_R_SHORT_READ 250 |
| #define SSL_R_TLSV1_ALERT_ACCESS_DENIED 251 |
| #define SSL_R_CA_DN_LENGTH_MISMATCH 252 |
| #define SSL_R_BAD_ECC_CERT 253 |
| #define SSL_R_NON_SSLV2_INITIAL_PACKET 254 |
| #define SSL_R_SSL_SESSION_ID_IS_DIFFERENT 255 |
| #define SSL_R_MISSING_TMP_RSA_PKEY 256 |
| #define SSL_R_BN_LIB 257 |
| #define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 258 |
| #define SSL_R_MISSING_RSA_ENCRYPTING_CERT 259 |
| #define SSL_R_NO_RENEGOTIATION 260 |
| #define SSL_R_NO_COMPRESSION_SPECIFIED 261 |
| #define SSL_R_WRONG_CERTIFICATE_TYPE 262 |
| #define SSL_R_TLSV1_UNRECOGNIZED_NAME 263 |
| #define SSL_R_CHANNEL_ID_SIGNATURE_INVALID 264 |
| #define SSL_R_READ_BIO_NOT_SET 265 |
| #define SSL_R_SSL23_DOING_SESSION_ID_REUSE 266 |
| #define SSL_R_RENEGOTIATE_EXT_TOO_LONG 267 |
| #define SSL_R_INVALID_CHALLENGE_LENGTH 268 |
| #define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 269 |
| #define SSL_R_LIBRARY_HAS_NO_CIPHERS 270 |
| #define SSL_R_WRONG_CURVE 271 |
| #define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 272 |
| #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 273 |
| #define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 274 |
| #define SSL_R_ECC_CERT_NOT_FOR_KEY_AGREEMENT 275 |
| #define SSL_R_MISSING_RSA_CERTIFICATE 276 |
| #define SSL_R_NO_P256_SUPPORT 277 |
| #define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 278 |
| #define SSL_R_INVALID_SERVERINFO_DATA 279 |
| #define SSL_R_GOT_CHANNEL_ID_BEFORE_A_CCS 280 |
| #define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 281 |
| #define SSL_R_KRB5_S_BAD_TICKET 282 |
| #define SSL_R_EVP_DIGESTSIGNFINAL_FAILED 283 |
| #define SSL_R_PACKET_LENGTH_TOO_LONG 284 |
| #define SSL_R_BAD_STATE 285 |
| #define SSL_R_USE_SRTP_NOT_NEGOTIATED 286 |
| #define SSL_R_BAD_RSA_E_LENGTH 287 |
| #define SSL_R_ILLEGAL_PADDING 288 |
| #define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE 289 |
| #define SSL_R_BAD_VALUE 290 |
| #define SSL_R_ECC_CERT_SHOULD_HAVE_RSA_SIGNATURE 291 |
| #define SSL_R_COMPRESSION_DISABLED 292 |
| #define SSL_R_BAD_DECOMPRESSION 293 |
| #define SSL_R_CHALLENGE_IS_DIFFERENT 294 |
| #define SSL_R_NO_CLIENT_CERT_METHOD 295 |
| #define SSL_R_SRTP_PROTECTION_PROFILE_LIST_TOO_LONG 296 |
| #define SSL_R_INVALID_MESSAGE 297 |
| #define SSL_R_HTTPS_PROXY_REQUEST 298 |
| #define SSL_R_AUTHZ_DATA_TOO_LARGE 299 |
| #define SSL_R_KRB5_S_TKT_EXPIRED 300 |
| #define SSL_R_NO_CERTIFICATE_SPECIFIED 301 |
| #define SSL_R_ECC_CERT_SHOULD_HAVE_SHA1_SIGNATURE 302 |
| #define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 303 |
| #define SSL_R_INVALID_STATUS_RESPONSE 304 |
| #define SSL_R_TLS_ILLEGAL_EXPORTER_LABEL 305 |
| #define SSL_R_ONLY_DTLS_1_2_ALLOWED_IN_SUITEB_MODE 306 |
| #define SSL_R_MISSING_TMP_ECDH_KEY 307 |
| #define SSL_R_CERTIFICATE_VERIFY_FAILED 308 |
| #define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER 309 |
| #define SSL_R_RENEGOTIATION_ENCODING_ERR 310 |
| #define SSL_R_NO_PRIVATEKEY 311 |
| #define SSL_R_TLS_HEARTBEAT_PENDING 312 |
| #define SSL_R_READ_WRONG_PACKET_TYPE 313 |
| #define SSL_R_SSL3_SESSION_ID_TOO_SHORT 314 |
| #define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES 315 |
| #define SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS 316 |
| #define SSL_R_HTTP_REQUEST 317 |
| #define SSL_R_KRB5_S_INIT 318 |
| #define SSL_R_TLSV1_ALERT_USER_CANCELLED 319 |
| #define SSL_R_RECORD_LENGTH_MISMATCH 320 |
| #define SSL_R_BAD_LENGTH 321 |
| #define SSL_R_NO_REQUIRED_DIGEST 322 |
| #define SSL_R_KRB5 323 |
| #define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 324 |
| #define SSL_R_CCS_RECEIVED_EARLY 325 |
| #define SSL_R_MISSING_ECDSA_SIGNING_CERT 326 |
| #define SSL_R_D2I_ECDSA_SIG 327 |
| #define SSL_R_PATH_TOO_LONG 328 |
| #define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 329 |
| #define SSL_R_UNSUPPORTED_DIGEST_TYPE 330 |
| #define SSL_R_OLD_SESSION_COMPRESSION_ALGORITHM_NOT_RETURNED 331 |
| #define SSL_R_PEER_ERROR_CERTIFICATE 332 |
| #define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS 333 |
| #define SSL_R_NO_CERTIFICATE_SET 334 |
| #define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 335 |
| #define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 336 |
| #define SSL_R_NO_CERTIFICATES_RETURNED 337 |
| #define SSL_R_BAD_WRITE_RETRY 338 |
| #define SSL_R_BAD_SSL_FILETYPE 339 |
| #define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE 340 |
| #define SSL_R_NO_CIPHERS_SPECIFIED 341 |
| #define SSL_R_LENGTH_MISMATCH 342 |
| #define SSL_R_NO_CIPHERS_PASSED 343 |
| #define SSL_R_NO_VERIFY_CALLBACK 344 |
| #define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 345 |
| #define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 346 |
| #define SSL_R_WRONG_NUMBER_OF_KEY_BITS 347 |
| #define SSL_R_UNEXPECTED_MESSAGE 348 |
| #define SSL_R_MISSING_DH_DSA_CERT 349 |
| #define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 350 |
| #define SSL_R_OPAQUE_PRF_INPUT_TOO_LONG 351 |
| #define SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES 352 |
| #define SSL_R_ILLEGAL_SUITEB_DIGEST 353 |
| #define SSL_R_NO_SHARED_SIGATURE_ALGORITHMS 354 |
| #define SSL_R_CLIENTHELLO_TLSEXT 355 |
| #define SSL_R_INVALID_AUTHZ_DATA 356 |
| #define SSL_R_BAD_RESPONSE_ARGUMENT 357 |
| #define SSL_R_PUBLIC_KEY_ENCRYPT_ERROR 358 |
| #define SSL_R_REQUIRED_CIPHER_MISSING 359 |
| #define SSL_R_INVALID_AUDIT_PROOF 360 |
| #define SSL_R_PSK_IDENTITY_NOT_FOUND 361 |
| #define SSL_R_UNKNOWN_ALERT_TYPE 362 |
| #define SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER 363 |
| #define SSL_R_TLSV1_ALERT_UNKNOWN_CA 364 |
| #define SSL_R_BAD_AUTHENTICATION_TYPE 365 |
| #define SSL_R_DECRYPTION_FAILED 366 |
| #define SSL_R_WRONG_SSL_VERSION 367 |
| #define SSL_R_NO_CERTIFICATE_RETURNED 368 |
| #define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 369 |
| #define SSL_R_CA_DN_TOO_LONG 370 |
| #define SSL_R_GOT_A_FIN_BEFORE_A_CCS 371 |
| #define SSL_R_COMPRESSION_LIBRARY_ERROR 372 |
| #define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 373 |
| #define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS 374 |
| #define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 375 |
| #define SSL_R_BAD_ECPOINT 376 |
| #define SSL_R_BAD_HANDSHAKE_LENGTH 377 |
| #define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 378 |
| #define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 379 |
| #define SSL_R_KRB5_S_RD_REQ 380 |
| #define SSL_R_PEER_ERROR_NO_CERTIFICATE 381 |
| #define SSL_R_PRE_MAC_LENGTH_TOO_LONG 382 |
| #define SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS 383 |
| #define SSL_R_UNKNOWN_DIGEST 384 |
| #define SSL_R_WRONG_SIGNATURE_SIZE 385 |
| #define SSL_R_SIGNATURE_ALGORITHMS_ERROR 386 |
| #define SSL_R_REQUIRED_COMPRESSSION_ALGORITHM_MISSING 387 |
| #define SSL_R_BAD_SIGNATURE 388 |
| #define SSL_R_BAD_PACKET_LENGTH 389 |
| #define SSL_R_CANNOT_SERIALIZE_PUBLIC_KEY 390 |
| #define SSL_R_RENEGOTIATION_MISMATCH 391 |
| #define SSL_R_BAD_MAC_LENGTH 392 |
| #define SSL_R_NO_PUBLICKEY 393 |
| #define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 394 |
| #define SSL_R_BAD_MAC_DECODE 395 |
| #define SSL_R_NO_PRIVATE_KEY_ASSIGNED 396 |
| #define SSL_R_EXTRA_DATA_IN_MESSAGE 397 |
| #define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 398 |
| #define SSL_R_CONNECTION_ID_IS_DIFFERENT 399 |
| #define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 400 |
| #define SSL_R_TLS_HEARTBEAT_PEER_DOESNT_ACCEPT 401 |
| #define SSL_R_MISSING_VERIFY_MESSAGE 402 |
| #define SSL_R_BAD_DSA_SIGNATURE 403 |
| #define SSL_R_UNKNOWN_SSL_VERSION 404 |
| #define SSL_R_KEY_ARG_TOO_LONG 405 |
| #define SSL_R_KRB5_C_INIT 406 |
| #define SSL_R_NO_CIPHER_LIST 407 |
| #define SSL_R_PEER_ERROR_NO_CIPHER 408 |
| #define SSL_R_UNKNOWN_CMD_NAME 409 |
| #define SSL_R_UNKNOWN_CIPHER_RETURNED 410 |
| #define SSL_R_RECORD_TOO_SMALL 411 |
| #define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 412 |
| #define SSL_R_UNSUPPORTED_SSL_VERSION 413 |
| #define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 414 |
| #define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY 415 |
| #define SSL_R_MISSING_EXPORT_TMP_RSA_KEY 416 |
| #define SSL_R_BAD_DATA 417 |
| #define SSL_R_KRB5_S_TKT_NYV 418 |
| #define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 419 |
| #define SSL_R_BAD_PROTOCOL_VERSION_NUMBER 420 |
| #define SSL_R_BAD_MESSAGE_TYPE 421 |
| #define SSL_R_MISSING_ECDH_CERT 422 |
| #define SSL_R_UNSUPPORTED_PROTOCOL 423 |
| #define SSL_R_SRP_A_CALC 424 |
| #define SSL_R_WRITE_BIO_NOT_SET 425 |
| #define SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE 426 |
| #define SSL_R_LENGTH_TOO_SHORT 427 |
| #define SSL_R_CERT_CB_ERROR 428 |
| #define SSL_R_DTLS_MESSAGE_TOO_BIG 429 |
| #define SSL_R_INVALID_SRP_USERNAME 430 |
| #define SSL_R_TOO_MANY_EMPTY_FRAGMENTS 431 |
| #define SSL_R_NESTED_GROUP 432 |
| #define SSL_R_UNEXPECTED_GROUP_CLOSE 433 |
| #define SSL_R_UNEXPECTED_OPERATOR_IN_GROUP 434 |
| #define SSL_R_MIXED_SPECIAL_OPERATOR_WITH_GROUPS 435 |
| #define SSL_R_INAPPROPRIATE_FALLBACK 436 |
| #define SSL_R_CLIENTHELLO_PARSE_FAILED 437 |
| #define SSL_R_CONNECTION_REJECTED 438 |
| |
| #endif |
