| // Copyright 2016 The BoringSSL Authors | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include "internal.h" | |
| #if !defined(OPENSSL_NO_ASM) && defined(OPENSSL_ARM) && \ | |
| defined(OPENSSL_LINUX) && !defined(OPENSSL_STATIC_ARMCAP) | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <sys/auxv.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include <openssl/mem.h> | |
| #include "cpu_arm_linux.h" | |
| static int open_eintr(const char *path, int flags) { | |
| int ret; | |
| do { | |
| ret = open(path, flags); | |
| } while (ret < 0 && errno == EINTR); | |
| return ret; | |
| } | |
| static ssize_t read_eintr(int fd, void *out, size_t len) { | |
| ssize_t ret; | |
| do { | |
| ret = read(fd, out, len); | |
| } while (ret < 0 && errno == EINTR); | |
| return ret; | |
| } | |
| // read_file opens |path| and reads until end-of-file. On success, it returns | |
| // one and sets |*out_ptr| and |*out_len| to a newly-allocated buffer with the | |
| // contents. Otherwise, it returns zero. | |
| static int read_file(char **out_ptr, size_t *out_len, const char *path) { | |
| int fd = open_eintr(path, O_RDONLY); | |
| if (fd < 0) { | |
| return 0; | |
| } | |
| static const size_t kReadSize = 1024; | |
| int ret = 0; | |
| size_t cap = kReadSize, len = 0; | |
| char *buf = reinterpret_cast<char *>(OPENSSL_malloc(cap)); | |
| if (buf == NULL) { | |
| goto err; | |
| } | |
| for (;;) { | |
| if (cap - len < kReadSize) { | |
| size_t new_cap = cap * 2; | |
| if (new_cap < cap) { | |
| goto err; | |
| } | |
| char *new_buf = reinterpret_cast<char *>(OPENSSL_realloc(buf, new_cap)); | |
| if (new_buf == NULL) { | |
| goto err; | |
| } | |
| buf = new_buf; | |
| cap = new_cap; | |
| } | |
| ssize_t bytes_read = read_eintr(fd, buf + len, kReadSize); | |
| if (bytes_read < 0) { | |
| goto err; | |
| } | |
| if (bytes_read == 0) { | |
| break; | |
| } | |
| len += bytes_read; | |
| } | |
| *out_ptr = buf; | |
| *out_len = len; | |
| ret = 1; | |
| buf = NULL; | |
| err: | |
| OPENSSL_free(buf); | |
| close(fd); | |
| return ret; | |
| } | |
| static int g_needs_hwcap2_workaround; | |
| void OPENSSL_cpuid_setup(void) { | |
| // We ignore the return value of |read_file| and proceed with an empty | |
| // /proc/cpuinfo on error. If |getauxval| works, we will still detect | |
| // capabilities. | |
| char *cpuinfo_data = NULL; | |
| size_t cpuinfo_len = 0; | |
| read_file(&cpuinfo_data, &cpuinfo_len, "/proc/cpuinfo"); | |
| STRING_PIECE cpuinfo; | |
| cpuinfo.data = cpuinfo_data; | |
| cpuinfo.len = cpuinfo_len; | |
| // Matching OpenSSL, only report other features if NEON is present. | |
| unsigned long hwcap = getauxval(AT_HWCAP); | |
| if (hwcap & CRYPTO_HWCAP_NEON) { | |
| #if defined(HWCAP_ARM_NEON) | |
| static_assert(HWCAP_ARM_NEON == CRYPTO_HWCAP_NEON, | |
| "CRYPTO_HWCAP values must match Linux"); | |
| #endif | |
| OPENSSL_armcap_P |= ARMV7_NEON; | |
| // Some ARMv8 Android devices don't expose AT_HWCAP2. Fall back to | |
| // /proc/cpuinfo. See https://crbug.com/boringssl/46. As of February 2021, | |
| // this is now rare (see Chrome's Net.NeedsHWCAP2Workaround metric), but AES | |
| // and PMULL extensions are very useful, so we still carry the workaround | |
| // for now. | |
| unsigned long hwcap2 = getauxval(AT_HWCAP2); | |
| if (hwcap2 == 0) { | |
| hwcap2 = crypto_get_arm_hwcap2_from_cpuinfo(&cpuinfo); | |
| g_needs_hwcap2_workaround = hwcap2 != 0; | |
| } | |
| // HWCAP2_* values, without the "CRYPTO_" prefix, are exposed through | |
| // <sys/auxv.h> in some versions of glibc(>= 2.41). Assert that we don't | |
| // diverge from those values. | |
| if (hwcap2 & CRYPTO_HWCAP2_AES) { | |
| #if defined(HWCAP2_AES) | |
| static_assert(HWCAP2_AES == CRYPTO_HWCAP2_AES, | |
| "CRYPTO_HWCAP2 values must match Linux"); | |
| #endif | |
| OPENSSL_armcap_P |= ARMV8_AES; | |
| } | |
| if (hwcap2 & CRYPTO_HWCAP2_PMULL) { | |
| #if defined(HWCAP2_PMULL) | |
| static_assert(HWCAP2_PMULL == CRYPTO_HWCAP2_PMULL, | |
| "CRYPTO_HWCAP2 values must match Linux"); | |
| #endif | |
| OPENSSL_armcap_P |= ARMV8_PMULL; | |
| } | |
| if (hwcap2 & CRYPTO_HWCAP2_SHA1) { | |
| #if defined(HWCAP2_SHA1) | |
| static_assert(HWCAP2_SHA1 == CRYPTO_HWCAP2_SHA1, | |
| "CRYPTO_HWCAP2 values must match Linux"); | |
| #endif | |
| OPENSSL_armcap_P |= ARMV8_SHA1; | |
| } | |
| if (hwcap2 & CRYPTO_HWCAP2_SHA2) { | |
| #if defined(HWCAP2_SHA2) | |
| static_assert(HWCAP2_SHA2 == CRYPTO_HWCAP2_SHA2, | |
| "CRYPTO_HWCAP2 values must match Linux"); | |
| #endif | |
| OPENSSL_armcap_P |= ARMV8_SHA256; | |
| } | |
| } | |
| OPENSSL_free(cpuinfo_data); | |
| } | |
| int CRYPTO_has_broken_NEON(void) { return 0; } | |
| int CRYPTO_needs_hwcap2_workaround(void) { | |
| OPENSSL_init_cpuid(); | |
| return g_needs_hwcap2_workaround; | |
| } | |
| #endif // OPENSSL_ARM && OPENSSL_LINUX && !OPENSSL_STATIC_ARMCAP |