blob: 50fe9bdf7ae38807be0e6b8f673fa1277283304f [file] [log] [blame]
/* ssl/ssl.h */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
* ECC cipher suite support in OpenSSL originally developed by
* SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
*/
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
* The portions of the attached software ("Contribution") is developed by
* Nokia Corporation and is licensed pursuant to the OpenSSL open source
* license.
*
* The Contribution, originally written by Mika Kousa and Pasi Eronen of
* Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
* support (see RFC 4279) to OpenSSL.
*
* No patent licenses or other rights except those expressly stated in
* the OpenSSL open source license shall be deemed granted or received
* expressly, by implication, estoppel, or otherwise.
*
* No assurances are provided by Nokia that the Contribution does not
* infringe the patent or other intellectual property rights of any third
* party or that the license provides you with all the necessary rights
* to make use of the Contribution.
*
* THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
* ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
* SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
* OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
* OTHERWISE.
*/
#ifndef OPENSSL_HEADER_SSL_H
#define OPENSSL_HEADER_SSL_H
#include <openssl/base.h>
#include <openssl/bio.h>
#include <openssl/buf.h>
#include <openssl/hmac.h>
#include <openssl/lhash.h>
#include <openssl/pem.h>
#include <openssl/thread.h>
#include <openssl/x509.h>
#if !defined(OPENSSL_WINDOWS)
#include <sys/time.h>
#endif
/* wpa_supplicant expects to get the version functions from ssl.h */
#include <openssl/crypto.h>
/* Forward-declare struct timeval. On Windows, it is defined in winsock2.h and
* Windows headers define too many macros to be included in public headers.
* However, only a forward declaration is needed. */
struct timeval;
#if defined(__cplusplus)
extern "C" {
#endif
/* SSL implementation. */
/* Initialization. */
/* SSL_library_init initializes the crypto and SSL libraries and returns one. */
OPENSSL_EXPORT int SSL_library_init(void);
/* Cipher suites. */
/* An SSL_CIPHER represents a cipher suite. */
typedef struct ssl_cipher_st {
/* name is the OpenSSL name for the cipher. */
const char *name;
/* id is the cipher suite value bitwise OR-d with 0x03000000. */
uint32_t id;
/* The following are internal fields. See ssl/internal.h for their values. */
uint32_t algorithm_mkey;
uint32_t algorithm_auth;
uint32_t algorithm_enc;
uint32_t algorithm_mac;
uint32_t algorithm_ssl;
uint32_t algo_strength;
uint32_t algorithm_prf;
/* strength_bits is the strength of the cipher in bits. */
int strength_bits;
/* alg_bits is the number of bits of key material used by the algorithm. */
int alg_bits;
} SSL_CIPHER;
DECLARE_STACK_OF(SSL_CIPHER)
/* SSL_get_cipher_by_value returns the structure representing a TLS cipher
* suite based on its assigned number, or NULL if unknown. See
* https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-4. */
OPENSSL_EXPORT const SSL_CIPHER *SSL_get_cipher_by_value(uint16_t value);
/* SSL_CIPHER_get_id returns |cipher|'s id. It may be cast to a |uint16_t| to
* get the cipher suite value. */
OPENSSL_EXPORT uint32_t SSL_CIPHER_get_id(const SSL_CIPHER *cipher);
/* SSL_CIPHER_is_AES returns one if |cipher| uses AES (either GCM or CBC
* mode). */
OPENSSL_EXPORT int SSL_CIPHER_is_AES(const SSL_CIPHER *cipher);
/* SSL_CIPHER_has_MD5_HMAC returns one if |cipher| uses HMAC-MD5. */
OPENSSL_EXPORT int SSL_CIPHER_has_MD5_HMAC(const SSL_CIPHER *cipher);
/* SSL_CIPHER_is_AESGCM returns one if |cipher| uses AES-GCM. */
OPENSSL_EXPORT int SSL_CIPHER_is_AESGCM(const SSL_CIPHER *cipher);
/* SSL_CIPHER_is_CHACHA20POLY1305 returns one if |cipher| uses
* CHACHA20_POLY1305. */
OPENSSL_EXPORT int SSL_CIPHER_is_CHACHA20POLY1305(const SSL_CIPHER *cipher);
/* SSL_CIPHER_get_name returns the OpenSSL name of |cipher|. */
OPENSSL_EXPORT const char *SSL_CIPHER_get_name(const SSL_CIPHER *cipher);
/* SSL_CIPHER_get_kx_name returns a string that describes the key-exchange
* method used by |cipher|. For example, "ECDHE_ECDSA". */
OPENSSL_EXPORT const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher);
/* SSL_CIPHER_get_rfc_name returns a newly-allocated string with the standard
* name for |cipher| or NULL on error. For example,
* "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256". The caller is responsible for
* calling |OPENSSL_free| on the result. */
OPENSSL_EXPORT char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher);
/* SSL_CIPHER_get_bits returns the strength, in bits, of |cipher|. If
* |out_alg_bits| is not NULL, it writes the number of bits consumed by the
* symmetric algorithm to |*out_alg_bits|. */
OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
int *out_alg_bits);
/* SSL contexts. */
/* An SSL_METHOD selects whether to use TLS or DTLS. */
typedef struct ssl_method_st SSL_METHOD;
/* TLS_method is the |SSL_METHOD| used for TLS (and SSLv3) connections. */
OPENSSL_EXPORT const SSL_METHOD *TLS_method(void);
/* DTLS_method is the |SSL_METHOD| used for DTLS connections. */
OPENSSL_EXPORT const SSL_METHOD *DTLS_method(void);
/* SSL_CTX_new returns a newly-allocated |SSL_CTX| with default settings or NULL
* on error. An |SSL_CTX| manages shared state and configuration between
* multiple TLS or DTLS connections. */
OPENSSL_EXPORT SSL_CTX *SSL_CTX_new(const SSL_METHOD *method);
/* SSL_CTX_free releases memory associated with |ctx|. */
OPENSSL_EXPORT void SSL_CTX_free(SSL_CTX *ctx);
/* SSL connections. */
/* SSL_new returns a newly-allocated |SSL| using |ctx| or NULL on error. An
* |SSL| object represents a single TLS or DTLS connection. It inherits settings
* from |ctx| at the time of creation. Settings may also be individually
* configured on the connection.
*
* On creation, an |SSL| is not configured to be either a client or server. Call
* |SSL_set_connect_state| or |SSL_set_accept_state| to set this. */
OPENSSL_EXPORT SSL *SSL_new(SSL_CTX *ctx);
/* SSL_free releases memory associated with |ssl|. */
OPENSSL_EXPORT void SSL_free(SSL *ssl);
/* SSL_set_connect_state configures |ssl| to be a client. */
OPENSSL_EXPORT void SSL_set_connect_state(SSL *ssl);
/* SSL_set_accept_state configures |ssl| to be a server. */
OPENSSL_EXPORT void SSL_set_accept_state(SSL *ssl);
/* Protocol versions. */
#define DTLS1_VERSION_MAJOR 0xfe
#define SSL3_VERSION_MAJOR 0x03
#define SSL3_VERSION 0x0300
#define TLS1_VERSION 0x0301
#define TLS1_1_VERSION 0x0302
#define TLS1_2_VERSION 0x0303
#define DTLS1_VERSION 0xfeff
#define DTLS1_2_VERSION 0xfefd
/* SSL_CTX_set_min_version sets the minimum protocol version for |ctx| to
* |version|. */
OPENSSL_EXPORT void SSL_CTX_set_min_version(SSL_CTX *ctx, uint16_t version);
/* SSL_CTX_set_max_version sets the maximum protocol version for |ctx| to
* |version|. */
OPENSSL_EXPORT void SSL_CTX_set_max_version(SSL_CTX *ctx, uint16_t version);
/* SSL_set_min_version sets the minimum protocol version for |ssl| to
* |version|. */
OPENSSL_EXPORT void SSL_set_min_version(SSL *ssl, uint16_t version);
/* SSL_set_max_version sets the maximum protocol version for |ssl| to
* |version|. */
OPENSSL_EXPORT void SSL_set_max_version(SSL *ssl, uint16_t version);
/* Options.
*
* Options configure protocol behavior. */
/* SSL_OP_LEGACY_SERVER_CONNECT allows initial connections to servers that don't
* support the renegotiation_info extension (RFC 5746). It is on by default. */
#define SSL_OP_LEGACY_SERVER_CONNECT 0x00000004L
/* SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER allows for record sizes |SSL3_RT_MAX_EXTRA|
* bytes above the maximum record size. */
#define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L
/* SSL_OP_TLS_D5_BUG accepts an RSAClientKeyExchange in TLS encoded as in SSL3
* (i.e. without a length prefix). */
#define SSL_OP_TLS_D5_BUG 0x00000100L
/* SSL_OP_ALL enables the above bug workarounds that are enabled by many
* consumers.
* TODO(davidben): Determine which of the remaining may be removed now. */
#define SSL_OP_ALL 0x00000BFFL
/* SSL_OP_NO_QUERY_MTU, in DTLS, disables querying the MTU from the underlying
* |BIO|. Instead, the MTU is configured with |SSL_set_mtu|. */
#define SSL_OP_NO_QUERY_MTU 0x00001000L
/* SSL_OP_NO_TICKET disables session ticket support (RFC 4507). */
#define SSL_OP_NO_TICKET 0x00004000L
/* SSL_OP_CIPHER_SERVER_PREFERENCE configures servers to select ciphers and
* ECDHE curves according to the server's preferences instead of the
* client's. */
#define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L
/* The following flags toggle individual protocol versions. This is deprecated.
* Use |SSL_CTX_set_min_version| and |SSL_CTX_set_max_version| instead. */
#define SSL_OP_NO_SSLv3 0x02000000L
#define SSL_OP_NO_TLSv1 0x04000000L
#define SSL_OP_NO_TLSv1_2 0x08000000L
#define SSL_OP_NO_TLSv1_1 0x10000000L
#define SSL_OP_NO_DTLSv1 SSL_OP_NO_TLSv1
#define SSL_OP_NO_DTLSv1_2 SSL_OP_NO_TLSv1_2
/* The following flags do nothing and are included only to make it easier to
* compile code with BoringSSL. */
#define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0
#define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0
#define SSL_OP_EPHEMERAL_RSA 0
#define SSL_OP_MICROSOFT_SESS_ID_BUG 0
#define SSL_OP_MSIE_SSLV2_RSA_PADDING 0
#define SSL_OP_NETSCAPE_CA_DN_BUG 0
#define SSL_OP_NETSCAPE_CHALLENGE_BUG 0
#define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0
#define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0
#define SSL_OP_NO_COMPRESSION 0
#define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0
#define SSL_OP_NO_SSLv2 0
#define SSL_OP_PKCS1_CHECK_1 0
#define SSL_OP_PKCS1_CHECK_2 0
#define SSL_OP_SINGLE_DH_USE 0
#define SSL_OP_SINGLE_ECDH_USE 0
#define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0
#define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0
#define SSL_OP_TLS_BLOCK_PADDING_BUG 0
#define SSL_OP_TLS_ROLLBACK_BUG 0
/* SSL_CTX_set_options enables all options set in |options| (which should be one
* or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a
* bitmask representing the resulting enabled options. */
OPENSSL_EXPORT uint32_t SSL_CTX_set_options(SSL_CTX *ctx, uint32_t options);
/* SSL_CTX_clear_options disables all options set in |options| (which should be
* one or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a
* bitmask representing the resulting enabled options. */
OPENSSL_EXPORT uint32_t SSL_CTX_clear_options(SSL_CTX *ctx, uint32_t options);
/* SSL_CTX_get_options returns a bitmask of |SSL_OP_*| values that represent all
* the options enabled for |ctx|. */
OPENSSL_EXPORT uint32_t SSL_CTX_get_options(const SSL_CTX *ctx);
/* SSL_set_options enables all options set in |options| (which should be one or
* more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a bitmask
* representing the resulting enabled options. */
OPENSSL_EXPORT uint32_t SSL_set_options(SSL *ssl, uint32_t options);
/* SSL_clear_options disables all options set in |options| (which should be one
* or more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a
* bitmask representing the resulting enabled options. */
OPENSSL_EXPORT uint32_t SSL_clear_options(SSL *ssl, uint32_t options);
/* SSL_get_options returns a bitmask of |SSL_OP_*| values that represent all the
* options enabled for |ssl|. */
OPENSSL_EXPORT uint32_t SSL_get_options(const SSL *ssl);
/* Modes.
*
* Modes configure API behavior. */
/* SSL_MODE_ENABLE_PARTIAL_WRITE allows |SSL_write| to complete with a partial
* result when the only part of the input was written in a single record. */
#define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L
/* SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER allows retrying an incomplete |SSL_write|
* with a different buffer. However, |SSL_write| still assumes the buffer
* contents are unchanged. This is not the default to avoid the misconception
* that non-blocking |SSL_write| behaves like non-blocking |write|. */
#define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L
/* SSL_MODE_NO_AUTO_CHAIN disables automatically building a certificate chain
* before sending certificates to the peer.
* TODO(davidben): Remove this behavior. https://crbug.com/486295. */
#define SSL_MODE_NO_AUTO_CHAIN 0x00000008L
/* SSL_MODE_ENABLE_FALSE_START allows clients to send application data before
* receipt of CCS and Finished. This mode enables full-handshakes to 'complete'
* in one RTT. See draft-bmoeller-tls-falsestart-01. */
#define SSL_MODE_ENABLE_FALSE_START 0x00000080L
/* Deprecated: SSL_MODE_HANDSHAKE_CUTTHROUGH is the same as
* SSL_MODE_ENABLE_FALSE_START. */
#define SSL_MODE_HANDSHAKE_CUTTHROUGH SSL_MODE_ENABLE_FALSE_START
/* SSL_MODE_CBC_RECORD_SPLITTING causes multi-byte CBC records in SSL 3.0 and
* TLS 1.0 to be split in two: the first record will contain a single byte and
* the second will contain the remainder. This effectively randomises the IV and
* prevents BEAST attacks. */
#define SSL_MODE_CBC_RECORD_SPLITTING 0x00000100L
/* SSL_MODE_NO_SESSION_CREATION will cause any attempts to create a session to
* fail with SSL_R_SESSION_MAY_NOT_BE_CREATED. This can be used to enforce that
* session resumption is used for a given SSL*. */
#define SSL_MODE_NO_SESSION_CREATION 0x00000200L
/* SSL_MODE_SEND_FALLBACK_SCSV sends TLS_FALLBACK_SCSV in the ClientHello.
* To be set only by applications that reconnect with a downgraded protocol
* version; see RFC 7507 for details.
*
* DO NOT ENABLE THIS if your application attempts a normal handshake. Only use
* this in explicit fallback retries, following the guidance in RFC 7507. */
#define SSL_MODE_SEND_FALLBACK_SCSV 0x00000400L
/* The following flags do nothing and are included only to make it easier to
* compile code with BoringSSL. */
#define SSL_MODE_AUTO_RETRY 0
#define SSL_MODE_RELEASE_BUFFERS 0
#define SSL_MODE_SEND_CLIENTHELLO_TIME 0
#define SSL_MODE_SEND_SERVERHELLO_TIME 0
/* SSL_CTX_set_mode enables all modes set in |mode| (which should be one or more
* of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a bitmask
* representing the resulting enabled modes. */
OPENSSL_EXPORT uint32_t SSL_CTX_set_mode(SSL_CTX *ctx, uint32_t mode);
/* SSL_CTX_clear_mode disables all modes set in |mode| (which should be one or
* more of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a
* bitmask representing the resulting enabled modes. */
OPENSSL_EXPORT uint32_t SSL_CTX_clear_mode(SSL_CTX *ctx, uint32_t mode);
/* SSL_CTX_get_mode returns a bitmask of |SSL_MODE_*| values that represent all
* the modes enabled for |ssl|. */
OPENSSL_EXPORT uint32_t SSL_CTX_get_mode(const SSL_CTX *ctx);
/* SSL_set_mode enables all modes set in |mode| (which should be one or more of
* the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask
* representing the resulting enabled modes. */
OPENSSL_EXPORT uint32_t SSL_set_mode(SSL *ssl, uint32_t mode);
/* SSL_clear_mode disables all modes set in |mode| (which should be one or more
* of the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask
* representing the resulting enabled modes. */
OPENSSL_EXPORT uint32_t SSL_clear_mode(SSL *ssl, uint32_t mode);
/* SSL_get_mode returns a bitmask of |SSL_MODE_*| values that represent all the
* modes enabled for |ssl|. */
OPENSSL_EXPORT uint32_t SSL_get_mode(const SSL *ssl);
/* Configuring certificates and private keys.
*
* These functions configure the connection's leaf certificate, private key, and
* certificate chain. The certificate chain is ordered leaf to root (as sent on
* the wire) but does not include the leaf. Both client and server certificates
* use these functions.
*
* Certificates and keys may be configured before the handshake or dynamically
* in the early callback and certificate callback. */
/* SSL_CTX_use_certificate sets |ctx|'s leaf certificate to |x509|. It returns
* one on success and zero on failure. */
OPENSSL_EXPORT int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x509);
/* SSL_use_certificate sets |ssl|'s leaf certificate to |x509|. It returns one
* on success and zero on failure. */
OPENSSL_EXPORT int SSL_use_certificate(SSL *ssl, X509 *x509);
/* SSL_CTX_use_PrivateKey sets |ctx|'s private key to |pkey|. It returns one on
* success and zero on failure. */
OPENSSL_EXPORT int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey);
/* SSL_use_PrivateKey sets |ssl|'s private key to |pkey|. It returns one on
* success and zero on failure. */
OPENSSL_EXPORT int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey);
/* SSL_CTX_set0_chain sets |ctx|'s certificate chain, excluding the leaf, to
* |chain|. On success, it returns one and takes ownership of |chain|.
* Otherwise, it returns zero. */
OPENSSL_EXPORT int SSL_CTX_set0_chain(SSL_CTX *ctx, STACK_OF(X509) *chain);
/* SSL_CTX_set1_chain sets |ctx|'s certificate chain, excluding the leaf, to
* |chain|. It returns one on success and zero on failure. The caller retains
* ownership of |chain| and may release it freely. */
OPENSSL_EXPORT int SSL_CTX_set1_chain(SSL_CTX *ctx, STACK_OF(X509) *chain);
/* SSL_set0_chain sets |ssl|'s certificate chain, excluding the leaf, to
* |chain|. On success, it returns one and takes ownership of |chain|.
* Otherwise, it returns zero. */
OPENSSL_EXPORT int SSL_set0_chain(SSL *ssl, STACK_OF(X509) *chain);
/* SSL_set1_chain sets |ssl|'s certificate chain, excluding the leaf, to
* |chain|. It returns one on success and zero on failure. The caller retains
* ownership of |chain| and may release it freely. */
OPENSSL_EXPORT int SSL_set1_chain(SSL *ssl, STACK_OF(X509) *chain);
/* SSL_CTX_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On
* success, it returns one and takes ownership of |x509|. Otherwise, it returns
* zero. */
OPENSSL_EXPORT int SSL_CTX_add0_chain_cert(SSL_CTX *ctx, X509 *x509);
/* SSL_CTX_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It
* returns one on success and zero on failure. The caller retains ownership of
* |x509| and may release it freely. */
OPENSSL_EXPORT int SSL_CTX_add1_chain_cert(SSL_CTX *ctx, X509 *x509);
/* SSL_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On success,
* it returns one and takes ownership of |x509|. Otherwise, it returns zero. */
OPENSSL_EXPORT int SSL_add0_chain_cert(SSL *ssl, X509 *x509);
/* SSL_CTX_add_extra_chain_cert calls |SSL_CTX_add0_chain_cert|. */
OPENSSL_EXPORT int SSL_CTX_add_extra_chain_cert(SSL_CTX *ctx, X509 *x509);
/* SSL_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It returns
* one on success and zero on failure. The caller retains ownership of |x509|
* and may release it freely. */
OPENSSL_EXPORT int SSL_add1_chain_cert(SSL *ssl, X509 *x509);
/* SSL_CTX_clear_chain_certs clears |ctx|'s certificate chain and returns
* one. */
OPENSSL_EXPORT int SSL_CTX_clear_chain_certs(SSL_CTX *ctx);
/* SSL_CTX_clear_extra_chain_certs calls |SSL_CTX_clear_chain_certs|. */
OPENSSL_EXPORT int SSL_CTX_clear_extra_chain_certs(SSL_CTX *ctx);
/* SSL_clear_chain_certs clears |ssl|'s certificate chain and returns one. */
OPENSSL_EXPORT int SSL_clear_chain_certs(SSL *ssl);
/* SSL_CTX_set_cert_cb sets a callback that is called to select a certificate.
* The callback returns one on success, zero on internal error, and a negative
* number on failure or to pause the handshake. If the handshake is paused,
* |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|. */
OPENSSL_EXPORT void SSL_CTX_set_cert_cb(SSL_CTX *ctx,
int (*cb)(SSL *ssl, void *arg),
void *arg);
/* SSL_set_cert_cb sets a callback that is called to select a certificate. The
* callback returns one on success, zero on internal error, and a negative
* number on failure or to pause the handshake. If the handshake is paused,
* |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|. */
OPENSSL_EXPORT void SSL_set_cert_cb(SSL *ssl, int (*cb)(SSL *ssl, void *arg),
void *arg);
/* SSL_certs_clear resets the private key, leaf certificate, and certificate
* chain of |ssl|. */
OPENSSL_EXPORT void SSL_certs_clear(SSL *ssl);
/* SSL_CTX_check_private_key returns one if the certificate and private key
* configured in |ctx| are consistent and zero otherwise. */
OPENSSL_EXPORT int SSL_CTX_check_private_key(const SSL_CTX *ctx);
/* SSL_check_private_key returns one if the certificate and private key
* configured in |ssl| are consistent and zero otherwise. */
OPENSSL_EXPORT int SSL_check_private_key(const SSL *ssl);
/* SSL_CTX_get0_certificate returns |ctx|'s leaf certificate. */
OPENSSL_EXPORT X509 *SSL_CTX_get0_certificate(const SSL_CTX *ctx);
/* SSL_get_certificate returns |ssl|'s leaf certificate. */
OPENSSL_EXPORT X509 *SSL_get_certificate(const SSL *ssl);
/* SSL_CTX_get0_privatekey returns |ctx|'s private key. */
OPENSSL_EXPORT EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx);
/* SSL_get_privatekey returns |ssl|'s private key. */
OPENSSL_EXPORT EVP_PKEY *SSL_get_privatekey(const SSL *ssl);
/* SSL_CTX_get0_chain_certs sets |*out_chain| to |ctx|'s certificate chain and
* returns one. */
OPENSSL_EXPORT int SSL_CTX_get0_chain_certs(const SSL_CTX *ctx,
STACK_OF(X509) **out_chain);
/* SSL_CTX_get_extra_chain_certs calls |SSL_CTX_get0_chain_certs|. */
OPENSSL_EXPORT int SSL_CTX_get_extra_chain_certs(const SSL_CTX *ctx,
STACK_OF(X509) **out_chain);
/* SSL_get0_chain_certs sets |*out_chain| to |ssl|'s certificate chain and
* returns one. */
OPENSSL_EXPORT int SSL_get0_chain_certs(const SSL *ssl,
STACK_OF(X509) **out_chain);
/* SSL_CTX_set_ocsp_response sets the OCSP reponse that is sent to clients
* which request it. It returns one on success and zero on error. The caller
* retains ownership of |response|. */
OPENSSL_EXPORT int SSL_CTX_set_ocsp_response(SSL_CTX *ctx,
const uint8_t *response,
size_t response_len);
/* Certificate and private key convenience functions. */
/* SSL_CTX_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one
* on success and zero on failure. */
OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa);
/* SSL_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one on
* success and zero on failure. */
OPENSSL_EXPORT int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa);
/* The following functions configure certificates or private keys but take as
* input DER-encoded structures. They return one on success and zero on
* failure. */
OPENSSL_EXPORT int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len,
const uint8_t *d);
OPENSSL_EXPORT int SSL_use_certificate_ASN1(SSL *ssl, const uint8_t *der,
int len);
OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_ASN1(int pk, SSL_CTX *ctx,
const uint8_t *d, long len);
OPENSSL_EXPORT int SSL_use_PrivateKey_ASN1(int type, SSL *ssl,
const uint8_t *d, long len);
OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx,
const uint8_t *der,
size_t der_len);
OPENSSL_EXPORT int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, const uint8_t *der,
size_t der_len);
/* The following functions configure certificates or private keys but take as
* input files to read from. They return one on success and zero on failure. The
* |type| parameter is one of the |SSL_FILETYPE_*| values and determines whether
* the file's contents are read as PEM or DER. */
#define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1
#define SSL_FILETYPE_PEM X509_FILETYPE_PEM
OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx,
const char *file,
int type);
OPENSSL_EXPORT int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file,
int type);
OPENSSL_EXPORT int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file,
int type);
OPENSSL_EXPORT int SSL_use_certificate_file(SSL *ssl, const char *file,
int type);
OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file,
int type);
OPENSSL_EXPORT int SSL_use_PrivateKey_file(SSL *ssl, const char *file,
int type);
/* SSL_CTX_use_certificate_file configures certificates for |ctx|. It reads the
* contents of |file| as a PEM-encoded leaf certificate followed optionally by
* the certificate chain to send to the peer. It returns one on success and zero
* on failure. */
OPENSSL_EXPORT int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx,
const char *file);
/* Custom private keys. */
enum ssl_private_key_result_t {
ssl_private_key_success,
ssl_private_key_retry,
ssl_private_key_failure,
};
/* SSL_PRIVATE_KEY_METHOD describes private key hooks. This is used to off-load
* signing operations to a custom, potentially asynchronous, backend. */
typedef struct ssl_private_key_method_st {
/* type returns either |EVP_PKEY_RSA| or |EVP_PKEY_EC| to denote the type of
* key used by |ssl|. */
int (*type)(SSL *ssl);
/* supports_digest returns one if the key used by |ssl| supports signing
* digests of type |md| and zero otherwise. */
int (*supports_digest)(SSL *ssl, const EVP_MD *md);
/* max_signature_len returns the maximum length of a signature signed by the
* key used by |ssl|. This must be a constant value for a given |ssl|. */
size_t (*max_signature_len)(SSL *ssl);
/* sign signs |in_len| bytes of digest from |in|. |md| is the hash function
* used to calculate |in|. On success, it returns |ssl_private_key_success|
* and writes at most |max_out| bytes of signature data to |out|. On failure,
* it returns |ssl_private_key_failure|. If the operation has not completed,
* it returns |ssl_private_key_retry|. |sign| should arrange for the
* high-level operation on |ssl| to be retried when the operation is
* completed. This will result in a call to |sign_complete|.
*
* If the key is an RSA key, implementations must use PKCS#1 padding. |in| is
* the digest itself, so the DigestInfo prefix, if any, must be prepended by
* |sign|. If |md| is |EVP_md5_sha1|, there is no prefix.
*
* It is an error to call |sign| while another private key operation is in
* progress on |ssl|. */
enum ssl_private_key_result_t (*sign)(SSL *ssl, uint8_t *out, size_t *out_len,
size_t max_out, const EVP_MD *md,
const uint8_t *in, size_t in_len);
/* sign_complete completes a pending |sign| operation. If the operation has
* completed, it returns |ssl_private_key_success| and writes the result to
* |out| as in |sign|. Otherwise, it returns |ssl_private_key_failure| on
* failure and |ssl_private_key_retry| if the operation is still in progress.
*
* |sign_complete| may be called arbitrarily many times before completion, but
* it is an error to call |sign_complete| if there is no pending |sign|
* operation in progress on |ssl|. */
enum ssl_private_key_result_t (*sign_complete)(SSL *ssl, uint8_t *out,
size_t *out_len, size_t max_out);
} SSL_PRIVATE_KEY_METHOD;
/* SSL_use_private_key_method configures a custom private key on |ssl|.
* |key_method| must remain valid for the lifetime of |ssl|. */
OPENSSL_EXPORT void SSL_set_private_key_method(
SSL *ssl, const SSL_PRIVATE_KEY_METHOD *key_method);
/* Connection information. */
/* SSL_get_tls_unique writes at most |max_out| bytes of the tls-unique value
* for |ssl| to |out| and sets |*out_len| to the number of bytes written. It
* returns one on success or zero on error. In general |max_out| should be at
* least 12.
*
* This function will always fail if the initial handshake has not completed.
* The tls-unique value will change after a renegotiation but, since
* renegotiations can be initiated by the server at any point, the higher-level
* protocol must either leave them disabled or define states in which the
* tls-unique value can be read.
*
* The tls-unique value is defined by
* https://tools.ietf.org/html/rfc5929#section-3.1. Due to a weakness in the
* TLS protocol, tls-unique is broken for resumed connections unless the
* Extended Master Secret extension is negotiated. Thus this function will
* return zero if |ssl| performed session resumption unless EMS was used when
* negotiating the original session. */
OPENSSL_EXPORT int SSL_get_tls_unique(const SSL *ssl, uint8_t *out,
size_t *out_len, size_t max_out);
/* Custom extensions.
*
* The custom extension functions allow TLS extensions to be added to
* ClientHello and ServerHello messages. */
/* SSL_custom_ext_add_cb is a callback function that is called when the
* ClientHello (for clients) or ServerHello (for servers) is constructed. In
* the case of a server, this callback will only be called for a given
* extension if the ClientHello contained that extension – it's not possible to
* inject extensions into a ServerHello that the client didn't request.
*
* When called, |extension_value| will contain the extension number that is
* being considered for addition (so that a single callback can handle multiple
* extensions). If the callback wishes to include the extension, it must set
* |*out| to point to |*out_len| bytes of extension contents and return one. In
* this case, the corresponding |SSL_custom_ext_free_cb| callback will later be
* called with the value of |*out| once that data has been copied.
*
* If the callback does not wish to add an extension it must return zero.
*
* Alternatively, the callback can abort the connection by setting
* |*out_alert_value| to a TLS alert number and returning -1. */
typedef int (*SSL_custom_ext_add_cb)(SSL *ssl, unsigned extension_value,
const uint8_t **out, size_t *out_len,
int *out_alert_value, void *add_arg);
/* SSL_custom_ext_free_cb is a callback function that is called by OpenSSL iff
* an |SSL_custom_ext_add_cb| callback previously returned one. In that case,
* this callback is called and passed the |out| pointer that was returned by
* the add callback. This is to free any dynamically allocated data created by
* the add callback. */
typedef void (*SSL_custom_ext_free_cb)(SSL *ssl, unsigned extension_value,
const uint8_t *out, void *add_arg);
/* SSL_custom_ext_parse_cb is a callback function that is called by OpenSSL to
* parse an extension from the peer: that is from the ServerHello for a client
* and from the ClientHello for a server.
*
* When called, |extension_value| will contain the extension number and the
* contents of the extension are |contents_len| bytes at |contents|.
*
* The callback must return one to continue the handshake. Otherwise, if it
* returns zero, a fatal alert with value |*out_alert_value| is sent and the
* handshake is aborted. */
typedef int (*SSL_custom_ext_parse_cb)(SSL *ssl, unsigned extension_value,
const uint8_t *contents,
size_t contents_len,
int *out_alert_value, void *parse_arg);
/* SSL_extension_supported returns one iff OpenSSL internally handles
* extensions of type |extension_value|. This can be used to avoid registering
* custom extension handlers for extensions that a future version of OpenSSL
* may handle internally. */
OPENSSL_EXPORT int SSL_extension_supported(unsigned extension_value);
/* SSL_CTX_add_client_custom_ext registers callback functions for handling
* custom TLS extensions for client connections.
*
* If |add_cb| is NULL then an empty extension will be added in each
* ClientHello. Otherwise, see the comment for |SSL_custom_ext_add_cb| about
* this callback.
*
* The |free_cb| may be NULL if |add_cb| doesn't dynamically allocate data that
* needs to be freed.
*
* It returns one on success or zero on error. It's always an error to register
* callbacks for the same extension twice, or to register callbacks for an
* extension that OpenSSL handles internally. See |SSL_extension_supported| to
* discover, at runtime, which extensions OpenSSL handles internally. */
OPENSSL_EXPORT int SSL_CTX_add_client_custom_ext(
SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb,
SSL_custom_ext_free_cb free_cb, void *add_arg,
SSL_custom_ext_parse_cb parse_cb, void *parse_arg);
/* SSL_CTX_add_server_custom_ext is the same as
* |SSL_CTX_add_client_custom_ext|, but for server connections.
*
* Unlike on the client side, if |add_cb| is NULL no extension will be added.
* The |add_cb|, if any, will only be called if the ClientHello contained a
* matching extension. */
OPENSSL_EXPORT int SSL_CTX_add_server_custom_ext(
SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb,
SSL_custom_ext_free_cb free_cb, void *add_arg,
SSL_custom_ext_parse_cb parse_cb, void *parse_arg);
/* Session tickets. */
/* SSL_CTX_get_tlsext_ticket_keys writes |ctx|'s session ticket key material to
* |len| bytes of |out|. It returns one on success and zero if |len| is not
* 48. If |out| is NULL, it returns 48 instead. */
OPENSSL_EXPORT int SSL_CTX_get_tlsext_ticket_keys(SSL_CTX *ctx, void *out,
size_t len);
/* SSL_CTX_set_tlsext_ticket_keys sets |ctx|'s session ticket key material to
* |len| bytes of |in|. It returns one on success and zero if |len| is not
* 48. If |in| is NULL, it returns 48 instead. */
OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_keys(SSL_CTX *ctx, const void *in,
size_t len);
/* SSL_TICKET_KEY_NAME_LEN is the length of the key name prefix of a session
* ticket. */
#define SSL_TICKET_KEY_NAME_LEN 16
/* SSL_CTX_set_tlsext_ticket_key_cb sets the ticket callback to |callback| and
* returns one. |callback| will be called when encrypting a new ticket and when
* decrypting a ticket from the client.
*
* In both modes, |ctx| and |hmac_ctx| will already have been initialized with
* |EVP_CIPHER_CTX_init| and |HMAC_CTX_init|, respectively. |callback|
* configures |hmac_ctx| with an HMAC digest and key, and configures |ctx|
* for encryption or decryption, based on the mode.
*
* When encrypting a new ticket, |encrypt| will be one. It writes a public
* 16-byte key name to |key_name| and a fresh IV to |iv|. The output IV length
* must match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode,
* |callback| returns 1 on success and -1 on error.
*
* When decrypting a ticket, |encrypt| will be zero. |key_name| will point to a
* 16-byte key name and |iv| points to an IV. The length of the IV consumed must
* match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode,
* |callback| returns -1 to abort the handshake, 0 if decrypting the ticket
* failed, and 1 or 2 on success. If it returns 2, the ticket will be renewed.
* This may be used to re-key the ticket.
*
* WARNING: |callback| wildly breaks the usual return value convention and is
* called in two different modes. */
OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_key_cb(
SSL_CTX *ctx, int (*callback)(SSL *ssl, uint8_t *key_name, uint8_t *iv,
EVP_CIPHER_CTX *ctx, HMAC_CTX *hmac_ctx,
int encrypt));
/* Underdocumented functions.
*
* Functions below here haven't been touched up and may be underdocumented. */
/* SSLeay version number for ASN.1 encoding of the session information */
/* Version 0 - initial version
* Version 1 - added the optional peer certificate. */
#define SSL_SESSION_ASN1_VERSION 0x0001
#define SSL_MAX_SSL_SESSION_ID_LENGTH 32
#define SSL_MAX_SID_CTX_LENGTH 32
#define SSL_MAX_MASTER_KEY_LENGTH 48
/* These are used to specify which ciphers to use and not to use */
#define SSL_TXT_MEDIUM "MEDIUM"
#define SSL_TXT_HIGH "HIGH"
#define SSL_TXT_FIPS "FIPS"
#define SSL_TXT_kRSA "kRSA"
#define SSL_TXT_kDHE "kDHE"
#define SSL_TXT_kEDH "kEDH" /* same as "kDHE" */
#define SSL_TXT_kECDHE "kECDHE"
#define SSL_TXT_kEECDH "kEECDH" /* same as "kECDHE" */
#define SSL_TXT_kPSK "kPSK"
#define SSL_TXT_aRSA "aRSA"
#define SSL_TXT_aECDSA "aECDSA"
#define SSL_TXT_aPSK "aPSK"
#define SSL_TXT_DH "DH"
#define SSL_TXT_DHE "DHE" /* same as "kDHE" */
#define SSL_TXT_EDH "EDH" /* same as "DHE" */
#define SSL_TXT_RSA "RSA"
#define SSL_TXT_ECDH "ECDH"
#define SSL_TXT_ECDHE "ECDHE" /* same as "kECDHE" */
#define SSL_TXT_EECDH "EECDH" /* same as "ECDHE" */
#define SSL_TXT_ECDSA "ECDSA"
#define SSL_TXT_PSK "PSK"
#define SSL_TXT_3DES "3DES"
#define SSL_TXT_RC4 "RC4"
#define SSL_TXT_AES128 "AES128"
#define SSL_TXT_AES256 "AES256"
#define SSL_TXT_AES "AES"
#define SSL_TXT_AES_GCM "AESGCM"
#define SSL_TXT_CHACHA20 "CHACHA20"
#define SSL_TXT_MD5 "MD5"
#define SSL_TXT_SHA1 "SHA1"
#define SSL_TXT_SHA "SHA" /* same as "SHA1" */
#define SSL_TXT_SHA256 "SHA256"
#define SSL_TXT_SHA384 "SHA384"
#define SSL_TXT_SSLV3 "SSLv3"
#define SSL_TXT_TLSV1 "TLSv1"
#define SSL_TXT_TLSV1_1 "TLSv1.1"
#define SSL_TXT_TLSV1_2 "TLSv1.2"
#define SSL_TXT_ALL "ALL"
/* COMPLEMENTOF* definitions. These identifiers are used to (de-select) ciphers
* normally not being used.
*
* Example: "RC4" will activate all ciphers using RC4 including ciphers without
* authentication, which would normally disabled by DEFAULT (due the "!ADH"
* being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" will make sure
* that it is also disabled in the specific selection. COMPLEMENTOF*
* identifiers are portable between version, as adjustments to the default
* cipher setup will also be included here.
*
* COMPLEMENTOFDEFAULT does not experience the same special treatment that
* DEFAULT gets, as only selection is being done and no sorting as needed for
* DEFAULT. */
#define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT"
/* The following cipher list is used by default. It also is substituted when an
* application-defined cipher list string starts with 'DEFAULT'. */
#define SSL_DEFAULT_CIPHER_LIST "ALL"
/* As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always
* starts with a reasonable order, and all we have to do for DEFAULT is
* throwing out anonymous and unencrypted ciphersuites! (The latter are not
* actually enabled by ALL, but "ALL:RSA" would enable some of them.) */
/* Used in SSL_set_shutdown()/SSL_get_shutdown(); */
#define SSL_SENT_SHUTDOWN 1
#define SSL_RECEIVED_SHUTDOWN 2
typedef struct ssl_protocol_method_st SSL_PROTOCOL_METHOD;
typedef struct ssl_session_st SSL_SESSION;
typedef struct ssl_conf_ctx_st SSL_CONF_CTX;
typedef struct ssl3_enc_method SSL3_ENC_METHOD;
/* SRTP protection profiles for use with the use_srtp extension (RFC 5764). */
typedef struct srtp_protection_profile_st {
const char *name;
unsigned long id;
} SRTP_PROTECTION_PROFILE;
DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE)
/* An SSL_SESSION represents an SSL session that may be resumed in an
* abbreviated handshake. */
struct ssl_session_st {
int ssl_version; /* what ssl version session info is being kept in here? */
int master_key_length;
uint8_t master_key[SSL_MAX_MASTER_KEY_LENGTH];
/* session_id - valid? */
unsigned int session_id_length;
uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH];
/* this is used to determine whether the session is being reused in
* the appropriate context. It is up to the application to set this,
* via SSL_new */
unsigned int sid_ctx_length;
uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH];
char *psk_identity;
/* Used to indicate that session resumption is not allowed. Applications can
* also set this bit for a new session via not_resumable_session_cb to
* disable session caching and tickets. */
int not_resumable;
/* The cert is the certificate used to establish this connection
*
* TODO(davidben): Remove this field. It is not serialized as part of the
* session, but some APIs access it. Certificate-related fields, where not
* redundant with |peer|, should be added to the session. Others should
* probably not be retained across resumptions. */
struct sess_cert_st /* SESS_CERT */ *sess_cert;
/* This is the cert for the other end. On clients, it will be the same as
* sess_cert->peer_key->x509 (the latter is not enough as sess_cert is not
* retained in the external representation of sessions, see ssl_asn1.c). */
X509 *peer;
/* when app_verify_callback accepts a session where the peer's certificate is
* not ok, we must remember the error for session reuse: */
long verify_result; /* only for servers */
CRYPTO_refcount_t references;
long timeout;
long time;
const SSL_CIPHER *cipher;
/* key_exchange_info contains an indication of the size of the asymmetric
* primitive used in the handshake that created this session. In the event
* that two asymmetric operations are used, this value applies to the one
* that controls the confidentiality of the connection. Its interpretation
* depends on the primitive that was used; as specified by the cipher suite:
* DHE: the size, in bits, of the multiplicative group.
* RSA: the size, in bits, of the modulus.
* ECDHE: the TLS id for the curve.
*
* A zero indicates that the value is unknown. */
uint32_t key_exchange_info;
CRYPTO_EX_DATA ex_data; /* application specific data */
/* These are used to make removal of session-ids more efficient and to
* implement a maximum cache size. */
SSL_SESSION *prev, *next;
char *tlsext_hostname;
/* RFC4507 info */
uint8_t *tlsext_tick; /* Session ticket */
size_t tlsext_ticklen; /* Session ticket length */
uint32_t tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */
size_t tlsext_signed_cert_timestamp_list_length;
uint8_t *tlsext_signed_cert_timestamp_list; /* Server's list. */
/* The OCSP response that came with the session. */
size_t ocsp_response_length;
uint8_t *ocsp_response;
char peer_sha256_valid; /* Non-zero if peer_sha256 is valid */
uint8_t
peer_sha256[SHA256_DIGEST_LENGTH]; /* SHA256 of peer certificate */
/* original_handshake_hash contains the handshake hash (either SHA-1+MD5 or
* SHA-2, depending on TLS version) for the original, full handshake that
* created a session. This is used by Channel IDs during resumption. */
uint8_t original_handshake_hash[EVP_MAX_MD_SIZE];
unsigned int original_handshake_hash_len;
/* extended_master_secret is true if the master secret in this session was
* generated using EMS and thus isn't vulnerable to the Triple Handshake
* attack. */
char extended_master_secret;
};
/* SSL_set_mtu sets the |ssl|'s MTU in DTLS to |mtu|. It returns one on success
* and zero on failure. */
OPENSSL_EXPORT int SSL_set_mtu(SSL *ssl, unsigned mtu);
/* SSL_get_secure_renegotiation_support returns one if the peer supports secure
* renegotiation (RFC 5746) and zero otherwise. */
OPENSSL_EXPORT int SSL_get_secure_renegotiation_support(const SSL *ssl);
/* SSL_CTX_set_msg_callback installs |cb| as the message callback for |ctx|.
* This callback will be called when sending or receiving low-level record
* headers, complete handshake messages, ChangeCipherSpec, and alerts.
* |write_p| is one for outgoing messages and zero for incoming messages.
*
* For each record header, |cb| is called with |version| = 0 and |content_type|
* = |SSL3_RT_HEADER|. The |len| bytes from |buf| contain the header. Note that
* this does not include the record body. If the record is sealed, the length
* in the header is the length of the ciphertext.
*
* For each handshake message, ChangeCipherSpec, and alert, |version| is the
* protocol version and |content_type| is the corresponding record type. The
* |len| bytes from |buf| contain the handshake message, one-byte
* ChangeCipherSpec body, and two-byte alert, respectively. */
OPENSSL_EXPORT void SSL_CTX_set_msg_callback(
SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg));
/* SSL_CTX_set_msg_callback_arg sets the |arg| parameter of the message
* callback. */
OPENSSL_EXPORT void SSL_CTX_set_msg_callback_arg(SSL_CTX *ctx, void *arg);
/* SSL_set_msg_callback installs |cb| as the message callback of |ssl|. See
* |SSL_CTX_set_msg_callback| for when this callback is called. */
OPENSSL_EXPORT void SSL_set_msg_callback(
SSL *ssl, void (*cb)(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg));
/* SSL_set_msg_callback_arg sets the |arg| parameter of the message callback. */
OPENSSL_EXPORT void SSL_set_msg_callback_arg(SSL *ssl, void *arg);
/* SSL_CTX_set_keylog_bio sets configures all SSL objects attached to |ctx| to
* log session material to |keylog_bio|. This is intended for debugging use
* with tools like Wireshark. |ctx| takes ownership of |keylog_bio|.
*
* The format is described in
* https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format. */
OPENSSL_EXPORT void SSL_CTX_set_keylog_bio(SSL_CTX *ctx, BIO *keylog_bio);
struct ssl_aead_ctx_st;
typedef struct ssl_aead_ctx_st SSL_AEAD_CTX;
#define SSL_MAX_CERT_LIST_DEFAULT 1024 * 100 /* 100k max cert list */
#define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024 * 20)
#define SSL_DEFAULT_SESSION_TIMEOUT (2 * 60 * 60)
/* This callback type is used inside SSL_CTX, SSL, and in the functions that
* set them. It is used to override the generation of SSL/TLS session IDs in a
* server. Return value should be zero on an error, non-zero to proceed. Also,
* callbacks should themselves check if the id they generate is unique
* otherwise the SSL handshake will fail with an error - callbacks can do this
* using the 'ssl' value they're passed by;
* SSL_has_matching_session_id(ssl, id, *id_len)
* The length value passed in is set at the maximum size the session ID can be.
* In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback
* can alter this length to be less if desired, but under SSLv2 session IDs are
* supposed to be fixed at 16 bytes so the id will be padded after the callback
* returns in this case. It is also an error for the callback to set the size
* to zero. */
typedef int (*GEN_SESSION_CB)(const SSL *ssl, uint8_t *id,
unsigned int *id_len);
/* ssl_early_callback_ctx is passed to certain callbacks that are called very
* early on during the server handshake. At this point, much of the SSL* hasn't
* been filled out and only the ClientHello can be depended on. */
struct ssl_early_callback_ctx {
SSL *ssl;
const uint8_t *client_hello;
size_t client_hello_len;
const uint8_t *session_id;
size_t session_id_len;
const uint8_t *cipher_suites;
size_t cipher_suites_len;
const uint8_t *compression_methods;
size_t compression_methods_len;
const uint8_t *extensions;
size_t extensions_len;
};
/* SSL_early_callback_ctx_extension_get searches the extensions in |ctx| for an
* extension of the given type. If not found, it returns zero. Otherwise it
* sets |out_data| to point to the extension contents (not including the type
* and length bytes), sets |out_len| to the length of the extension contents
* and returns one. */
OPENSSL_EXPORT char SSL_early_callback_ctx_extension_get(
const struct ssl_early_callback_ctx *ctx, uint16_t extension_type,
const uint8_t **out_data, size_t *out_len);
typedef struct ssl_comp_st SSL_COMP;
struct ssl_comp_st {
int id;
const char *name;
char *method;
};
DECLARE_STACK_OF(SSL_COMP)
DECLARE_LHASH_OF(SSL_SESSION)
/* ssl_cipher_preference_list_st contains a list of SSL_CIPHERs with
* equal-preference groups. For TLS clients, the groups are moot because the
* server picks the cipher and groups cannot be expressed on the wire. However,
* for servers, the equal-preference groups allow the client's preferences to
* be partially respected. (This only has an effect with
* SSL_OP_CIPHER_SERVER_PREFERENCE).
*
* The equal-preference groups are expressed by grouping SSL_CIPHERs together.
* All elements of a group have the same priority: no ordering is expressed
* within a group.
*
* The values in |ciphers| are in one-to-one correspondence with
* |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of
* bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to
* indicate that the corresponding SSL_CIPHER is not the last element of a
* group, or 0 to indicate that it is.
*
* For example, if |in_group_flags| contains all zeros then that indicates a
* traditional, fully-ordered preference. Every SSL_CIPHER is the last element
* of the group (i.e. they are all in a one-element group).
*
* For a more complex example, consider:
* ciphers: A B C D E F
* in_group_flags: 1 1 0 0 1 0
*
* That would express the following, order:
*
* A E
* B -> D -> F
* C
*/
struct ssl_cipher_preference_list_st {
STACK_OF(SSL_CIPHER) *ciphers;
uint8_t *in_group_flags;
};
struct ssl_ctx_st {
const SSL_PROTOCOL_METHOD *method;
/* lock is used to protect various operations on this object. */
CRYPTO_MUTEX lock;
/* max_version is the maximum acceptable protocol version. If zero, the
* maximum supported version, currently (D)TLS 1.2, is used. */
uint16_t max_version;
/* min_version is the minimum acceptable protocl version. If zero, the
* minimum supported version, currently SSL 3.0 and DTLS 1.0, is used */
uint16_t min_version;
struct ssl_cipher_preference_list_st *cipher_list;
/* same as above but sorted for lookup */
STACK_OF(SSL_CIPHER) *cipher_list_by_id;
/* cipher_list_tls11 is the list of ciphers when TLS 1.1 or greater is in
* use. This only applies to server connections as, for clients, the version
* number is known at connect time and so the cipher list can be set then. */
struct ssl_cipher_preference_list_st *cipher_list_tls11;
X509_STORE *cert_store;
LHASH_OF(SSL_SESSION) *sessions;
/* Most session-ids that will be cached, default is
* SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */
unsigned long session_cache_size;
SSL_SESSION *session_cache_head;
SSL_SESSION *session_cache_tail;
/* handshakes_since_cache_flush is the number of successful handshakes since
* the last cache flush. */
int handshakes_since_cache_flush;
/* This can have one of 2 values, ored together,
* SSL_SESS_CACHE_CLIENT,
* SSL_SESS_CACHE_SERVER,
* Default is SSL_SESSION_CACHE_SERVER, which means only
* SSL_accept which cache SSL_SESSIONS. */
int session_cache_mode;
/* If timeout is not 0, it is the default timeout value set when SSL_new() is
* called. This has been put in to make life easier to set things up */
long session_timeout;
/* If this callback is not null, it will be called each time a session id is
* added to the cache. If this function returns 1, it means that the
* callback will do a SSL_SESSION_free() when it has finished using it.
* Otherwise, on 0, it means the callback has finished with it. If
* remove_session_cb is not null, it will be called when a session-id is
* removed from the cache. After the call, OpenSSL will SSL_SESSION_free()
* it. */
int (*new_session_cb)(SSL *ssl, SSL_SESSION *sess);
void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *sess);
SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *data, int len,
int *copy);
CRYPTO_refcount_t references;
/* if defined, these override the X509_verify_cert() calls */
int (*app_verify_callback)(X509_STORE_CTX *, void *);
void *app_verify_arg;
/* before OpenSSL 0.9.7, 'app_verify_arg' was ignored ('app_verify_callback'
* was called with just one argument) */
/* Default password callback. */
pem_password_cb *default_passwd_callback;
/* Default password callback user data. */
void *default_passwd_callback_userdata;
/* get client cert callback */
int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey);
/* get channel id callback */
void (*channel_id_cb)(SSL *ssl, EVP_PKEY **pkey);
CRYPTO_EX_DATA ex_data;
/* custom_*_extensions stores any callback sets for custom extensions. Note
* that these pointers will be NULL if the stack would otherwise be empty. */
STACK_OF(SSL_CUSTOM_EXTENSION) *client_custom_extensions;
STACK_OF(SSL_CUSTOM_EXTENSION) *server_custom_extensions;
/* Default values used when no per-SSL value is defined follow */
void (*info_callback)(const SSL *ssl, int type,
int val); /* used if SSL's info_callback is NULL */
/* what we put in client cert requests */
STACK_OF(X509_NAME) *client_CA;
/* Default values to use in SSL structures follow (these are copied by
* SSL_new) */
uint32_t options;
uint32_t mode;
uint32_t max_cert_list;
struct cert_st /* CERT */ *cert;
/* callback that allows applications to peek at protocol messages */
void (*msg_callback)(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg);
void *msg_callback_arg;
int verify_mode;
unsigned int sid_ctx_length;
uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH];
int (*default_verify_callback)(
int ok, X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */
/* Default generate session ID callback. */
GEN_SESSION_CB generate_session_id;
X509_VERIFY_PARAM *param;
/* select_certificate_cb is called before most ClientHello processing and
* before the decision whether to resume a session is made. It may return one
* to continue the handshake or zero to cause the handshake loop to return
* with an error and cause SSL_get_error to return
* SSL_ERROR_PENDING_CERTIFICATE. Note: when the handshake loop is resumed, it
* will not call the callback a second time. */
int (*select_certificate_cb)(const struct ssl_early_callback_ctx *);
/* dos_protection_cb is called once the resumption decision for a ClientHello
* has been made. It returns one to continue the handshake or zero to
* abort. */
int (*dos_protection_cb) (const struct ssl_early_callback_ctx *);
/* quiet_shutdown is true if the connection should not send a close_notify on
* shutdown. */
int quiet_shutdown;
/* Maximum amount of data to send in one fragment. actual record size can be
* more than this due to padding and MAC overheads. */
uint16_t max_send_fragment;
/* TLS extensions servername callback */
int (*tlsext_servername_callback)(SSL *, int *, void *);
void *tlsext_servername_arg;
/* RFC 4507 session ticket keys */
uint8_t tlsext_tick_key_name[SSL_TICKET_KEY_NAME_LEN];
uint8_t tlsext_tick_hmac_key[16];
uint8_t tlsext_tick_aes_key[16];
/* Callback to support customisation of ticket key setting */
int (*tlsext_ticket_key_cb)(SSL *ssl, uint8_t *name, uint8_t *iv,
EVP_CIPHER_CTX *ectx, HMAC_CTX *hctx, int enc);
/* Server-only: psk_identity_hint is the default identity hint to send in
* PSK-based key exchanges. */
char *psk_identity_hint;
unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
char *identity,
unsigned int max_identity_len,
uint8_t *psk, unsigned int max_psk_len);
unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
uint8_t *psk, unsigned int max_psk_len);
/* retain_only_sha256_of_client_certs is true if we should compute the SHA256
* hash of the peer's certifiate and then discard it to save memory and
* session space. Only effective on the server side. */
char retain_only_sha256_of_client_certs;
/* Next protocol negotiation information */
/* (for experimental NPN extension). */
/* For a server, this contains a callback function by which the set of
* advertised protocols can be provided. */
int (*next_protos_advertised_cb)(SSL *s, const uint8_t **buf,
unsigned int *len, void *arg);
void *next_protos_advertised_cb_arg;
/* For a client, this contains a callback function that selects the
* next protocol from the list provided by the server. */
int (*next_proto_select_cb)(SSL *s, uint8_t **out, uint8_t *outlen,
const uint8_t *in, unsigned int inlen, void *arg);
void *next_proto_select_cb_arg;
/* ALPN information
* (we are in the process of transitioning from NPN to ALPN.) */
/* For a server, this contains a callback function that allows the
* server to select the protocol for the connection.
* out: on successful return, this must point to the raw protocol
* name (without the length prefix).
* outlen: on successful return, this contains the length of |*out|.
* in: points to the client's list of supported protocols in
* wire-format.
* inlen: the length of |in|. */
int (*alpn_select_cb)(SSL *s, const uint8_t **out, uint8_t *outlen,
const uint8_t *in, unsigned int inlen, void *arg);
void *alpn_select_cb_arg;
/* For a client, this contains the list of supported protocols in wire
* format. */
uint8_t *alpn_client_proto_list;
unsigned alpn_client_proto_list_len;
/* SRTP profiles we are willing to do from RFC 5764 */
STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;
/* EC extension values inherited by SSL structure */
size_t tlsext_ellipticcurvelist_length;
uint16_t *tlsext_ellipticcurvelist;
/* If true, a client will advertise the Channel ID extension and a server
* will echo it. */
char tlsext_channel_id_enabled;
/* The client's Channel ID private key. */
EVP_PKEY *tlsext_channel_id_private;
/* If true, a client will request certificate timestamps. */
char signed_cert_timestamps_enabled;
/* If true, a client will request a stapled OCSP response. */
char ocsp_stapling_enabled;
/* OCSP response to be sent to the client, if requested. */
uint8_t *ocsp_response;
size_t ocsp_response_length;
/* If not NULL, session key material will be logged to this BIO for debugging
* purposes. The format matches NSS's and is readable by Wireshark. */
BIO *keylog_bio;
/* current_time_cb, if not NULL, is the function to use to get the current
* time. It sets |*out_clock| to the current time. */
void (*current_time_cb)(const SSL *ssl, struct timeval *out_clock);
};
OPENSSL_EXPORT LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx);
/* SSL_CTX_sess_number returns the number of sessions in |ctx|'s internal
* session cache. */
OPENSSL_EXPORT size_t SSL_CTX_sess_number(const SSL_CTX *ctx);
OPENSSL_EXPORT void SSL_CTX_sess_set_new_cb(
SSL_CTX *ctx, int (*new_session_cb)(SSL *ssl, SSL_SESSION *sess));
OPENSSL_EXPORT int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))(SSL *ssl,
SSL_SESSION *sess);
OPENSSL_EXPORT void SSL_CTX_sess_set_remove_cb(
SSL_CTX *ctx,
void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *sess));
OPENSSL_EXPORT void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))(
SSL_CTX *ctx, SSL_SESSION *sess);
OPENSSL_EXPORT void SSL_CTX_sess_set_get_cb(
SSL_CTX *ctx,
SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *data, int len,
int *copy));
OPENSSL_EXPORT SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))(
SSL *ssl, uint8_t *data, int len, int *copy);
/* SSL_magic_pending_session_ptr returns a magic SSL_SESSION* which indicates
* that the session isn't currently unavailable. SSL_get_error will then return
* SSL_ERROR_PENDING_SESSION and the handshake can be retried later when the
* lookup has completed. */
OPENSSL_EXPORT SSL_SESSION *SSL_magic_pending_session_ptr(void);
OPENSSL_EXPORT void SSL_CTX_set_info_callback(SSL_CTX *ctx,
void (*cb)(const SSL *ssl,
int type, int val));
OPENSSL_EXPORT void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl,
int type,
int val);
OPENSSL_EXPORT void SSL_CTX_set_client_cert_cb(
SSL_CTX *ctx,
int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey));
OPENSSL_EXPORT int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx))(SSL *ssl,
X509 **x509,
EVP_PKEY **pkey);
OPENSSL_EXPORT void SSL_CTX_set_channel_id_cb(
SSL_CTX *ctx, void (*channel_id_cb)(SSL *ssl, EVP_PKEY **pkey));
OPENSSL_EXPORT void (*SSL_CTX_get_channel_id_cb(SSL_CTX *ctx))(SSL *ssl,
EVP_PKEY **pkey);
/* SSL_enable_signed_cert_timestamps causes |ssl| (which must be the client end
* of a connection) to request SCTs from the server. See
* https://tools.ietf.org/html/rfc6962. It returns one. */
OPENSSL_EXPORT int SSL_enable_signed_cert_timestamps(SSL *ssl);
/* SSL_CTX_enable_signed_cert_timestamps enables SCT requests on all client SSL
* objects created from |ctx|. */
OPENSSL_EXPORT void SSL_CTX_enable_signed_cert_timestamps(SSL_CTX *ctx);
/* SSL_enable_ocsp_stapling causes |ssl| (which must be the client end of a
* connection) to request a stapled OCSP response from the server. It returns
* one. */
OPENSSL_EXPORT int SSL_enable_ocsp_stapling(SSL *ssl);
/* SSL_CTX_enable_ocsp_stapling enables OCSP stapling on all client SSL objects
* created from |ctx|. */
OPENSSL_EXPORT void SSL_CTX_enable_ocsp_stapling(SSL_CTX *ctx);
/* SSL_get0_signed_cert_timestamp_list sets |*out| and |*out_len| to point to
* |*out_len| bytes of SCT information from the server. This is only valid if
* |ssl| is a client. The SCT information is a SignedCertificateTimestampList
* (including the two leading length bytes).
* See https://tools.ietf.org/html/rfc6962#section-3.3
* If no SCT was received then |*out_len| will be zero on return.
*
* WARNING: the returned data is not guaranteed to be well formed. */
OPENSSL_EXPORT void SSL_get0_signed_cert_timestamp_list(const SSL *ssl,
const uint8_t **out,
size_t *out_len);
/* SSL_get0_ocsp_response sets |*out| and |*out_len| to point to |*out_len|
* bytes of an OCSP response from the server. This is the DER encoding of an
* OCSPResponse type as defined in RFC 2560.
*
* WARNING: the returned data is not guaranteed to be well formed. */
OPENSSL_EXPORT void SSL_get0_ocsp_response(const SSL *ssl, const uint8_t **out,
size_t *out_len);
OPENSSL_EXPORT void SSL_CTX_set_next_protos_advertised_cb(
SSL_CTX *s,
int (*cb)(SSL *ssl, const uint8_t **out, unsigned int *outlen, void *arg),
void *arg);
OPENSSL_EXPORT void SSL_CTX_set_next_proto_select_cb(
SSL_CTX *s, int (*cb)(SSL *ssl, uint8_t **out, uint8_t *outlen,
const uint8_t *in, unsigned int inlen, void *arg),
void *arg);
OPENSSL_EXPORT void SSL_get0_next_proto_negotiated(const SSL *s,
const uint8_t **data,
unsigned *len);
OPENSSL_EXPORT int SSL_select_next_proto(uint8_t **out, uint8_t *outlen,
const uint8_t *in, unsigned int inlen,
const uint8_t *client,
unsigned int client_len);
#define OPENSSL_NPN_UNSUPPORTED 0
#define OPENSSL_NPN_NEGOTIATED 1
#define OPENSSL_NPN_NO_OVERLAP 2
/* SSL_CTX_set_alpn_protos sets the ALPN protocol list on |ctx| to |protos|.
* |protos| must be in wire-format (i.e. a series of non-empty, 8-bit
* length-prefixed strings). It returns zero on success and one on failure.
*
* WARNING: this function is dangerous because it breaks the usual return value
* convention. */
OPENSSL_EXPORT int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos,
unsigned protos_len);
/* SSL_set_alpn_protos sets the ALPN protocol list on |ssl| to |protos|.
* |protos| must be in wire-format (i.e. a series of non-empty, 8-bit
* length-prefixed strings). It returns zero on success and one on failure.
*
* WARNING: this function is dangerous because it breaks the usual return value
* convention. */
OPENSSL_EXPORT int SSL_set_alpn_protos(SSL *ssl, const uint8_t *protos,
unsigned protos_len);
OPENSSL_EXPORT void SSL_CTX_set_alpn_select_cb(
SSL_CTX *ctx, int (*cb)(SSL *ssl, const uint8_t **out, uint8_t *outlen,
const uint8_t *in, unsigned int inlen, void *arg),
void *arg);
OPENSSL_EXPORT void SSL_get0_alpn_selected(const SSL *ssl, const uint8_t **data,
unsigned *len);
/* SSL_set_reject_peer_renegotiations controls whether renegotiation attempts by
* the peer are rejected. It may be set at any point in a connection's lifetime
* to control future renegotiations programmatically. By default, renegotiations
* are rejected. (Renegotiations requested by a client are always rejected.) */
OPENSSL_EXPORT void SSL_set_reject_peer_renegotiations(SSL *ssl, int reject);
/* the maximum length of the buffer given to callbacks containing the resulting
* identity/psk */
#define PSK_MAX_IDENTITY_LEN 128
#define PSK_MAX_PSK_LEN 256
OPENSSL_EXPORT void SSL_CTX_set_psk_client_callback(
SSL_CTX *ctx,
unsigned int (*psk_client_callback)(
SSL *ssl, const char *hint, char *identity,
unsigned int max_identity_len, uint8_t *psk, unsigned int max_psk_len));
OPENSSL_EXPORT void SSL_set_psk_client_callback(
SSL *ssl, unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
char *identity,
unsigned int max_identity_len,
uint8_t *psk,
unsigned int max_psk_len));
OPENSSL_EXPORT void SSL_CTX_set_psk_server_callback(
SSL_CTX *ctx,
unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
uint8_t *psk,
unsigned int max_psk_len));
OPENSSL_EXPORT void SSL_set_psk_server_callback(
SSL *ssl,
unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
uint8_t *psk,
unsigned int max_psk_len));
OPENSSL_EXPORT int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx,
const char *identity_hint);
OPENSSL_EXPORT int SSL_use_psk_identity_hint(SSL *s, const char *identity_hint);
OPENSSL_EXPORT const char *SSL_get_psk_identity_hint(const SSL *s);
OPENSSL_EXPORT const char *SSL_get_psk_identity(const SSL *s);
#define SSL_NOTHING 1
#define SSL_WRITING 2
#define SSL_READING 3
#define SSL_X509_LOOKUP 4
#define SSL_CHANNEL_ID_LOOKUP 5
#define SSL_PENDING_SESSION 7
#define SSL_CERTIFICATE_SELECTION_PENDING 8
#define SSL_PRIVATE_KEY_OPERATION 9
/* These will only be used when doing non-blocking IO */
#define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING)
#define SSL_want_read(s) (SSL_want(s) == SSL_READING)
#define SSL_want_write(s) (SSL_want(s) == SSL_WRITING)
#define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP)
#define SSL_want_channel_id_lookup(s) (SSL_want(s) == SSL_CHANNEL_ID_LOOKUP)
#define SSL_want_session(s) (SSL_want(s) == SSL_PENDING_SESSION)
#define SSL_want_certificate(s) \
(SSL_want(s) == SSL_CERTIFICATE_SELECTION_PENDING)
#define SSL_want_private_key_operation(s) \
(SSL_want(s) == SSL_PRIVATE_KEY_OPERATION)
struct ssl_st {
/* version is the protocol version. */
int version;
/* method is the method table corresponding to the current protocol (DTLS or
* TLS). */
const SSL_PROTOCOL_METHOD *method;
/* enc_method is the method table corresponding to the current protocol
* version. */
const SSL3_ENC_METHOD *enc_method;
/* max_version is the maximum acceptable protocol version. If zero, the
* maximum supported version, currently (D)TLS 1.2, is used. */
uint16_t max_version;
/* min_version is the minimum acceptable protocl version. If zero, the
* minimum supported version, currently SSL 3.0 and DTLS 1.0, is used */
uint16_t min_version;
/* There are 2 BIO's even though they are normally both the same. This is so
* data can be read and written to different handlers */
BIO *rbio; /* used by SSL_read */
BIO *wbio; /* used by SSL_write */
BIO *bbio; /* used during session-id reuse to concatenate
* messages */
/* This holds a variable that indicates what we were doing when a 0 or -1 is
* returned. This is needed for non-blocking IO so we know what request
* needs re-doing when in SSL_accept or SSL_connect */
int rwstate;
/* true when we are actually in SSL_accept() or SSL_connect() */
int in_handshake;
int (*handshake_func)(SSL *);
/* Imagine that here's a boolean member "init" that is switched as soon as
* SSL_set_{accept/connect}_state is called for the first time, so that
* "state" and "handshake_func" are properly initialized. But as
* handshake_func is == 0 until then, we use this test instead of an "init"
* member. */
/* server is true iff the this SSL* is the server half. Note: before the SSL*
* is initialized by either SSL_set_accept_state or SSL_set_connect_state,
* the side is not determined. In this state, server is always false. */
int server;
/* quiet_shutdown is true if the connection should not send a close_notify on
* shutdown. */
int quiet_shutdown;
int shutdown; /* we have shut things down, 0x01 sent, 0x02
* for received */
int state; /* where we are */
BUF_MEM *init_buf; /* buffer used during init */
uint8_t *init_msg; /* pointer to handshake message body, set by
ssl3_get_message() */
int init_num; /* amount read/written */
int init_off; /* amount read/written */
struct ssl3_state_st *s3; /* SSLv3 variables */
struct dtls1_state_st *d1; /* DTLSv1 variables */
/* callback that allows applications to peek at protocol messages */
void (*msg_callback)(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg);
void *msg_callback_arg;
int hit; /* reusing a previous session */
X509_VERIFY_PARAM *param;
/* crypto */
struct ssl_cipher_preference_list_st *cipher_list;
STACK_OF(SSL_CIPHER) *cipher_list_by_id;
SSL_AEAD_CTX *aead_read_ctx;
SSL_AEAD_CTX *aead_write_ctx;
/* session info */
/* client cert? */
/* This is used to hold the server certificate used */
struct cert_st /* CERT */ *cert;
/* the session_id_context is used to ensure sessions are only reused
* in the appropriate context */
unsigned int sid_ctx_length;
uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH];
/* This can also be in the session once a session is established */
SSL_SESSION *session;
/* Default generate session ID callback. */
GEN_SESSION_CB generate_session_id;
/* Used in SSL2 and SSL3 */
int verify_mode; /* 0 don't care about verify failure.
* 1 fail if verify fails */
int (*verify_callback)(int ok,
X509_STORE_CTX *ctx); /* fail if callback returns 0 */
void (*info_callback)(const SSL *ssl, int type,
int val); /* optional informational callback */
/* Server-only: psk_identity_hint is the identity hint to send in
* PSK-based key exchanges. */
char *psk_identity_hint;
unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
char *identity,
unsigned int max_identity_len,
uint8_t *psk, unsigned int max_psk_len);
unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
uint8_t *psk, unsigned int max_psk_len);
SSL_CTX *ctx;
/* extra application data */
long verify_result;
CRYPTO_EX_DATA ex_data;
/* for server side, keep the list of CA_dn we can use */
STACK_OF(X509_NAME) *client_CA;
uint32_t options; /* protocol behaviour */
uint32_t mode; /* API behaviour */
uint32_t max_cert_list;
int client_version; /* what was passed, used for
* SSLv3/TLS rollback check */
uint16_t max_send_fragment;
char *tlsext_hostname;
/* RFC4507 session ticket expected to be received or sent */
int tlsext_ticket_expected;
size_t tlsext_ellipticcurvelist_length;
uint16_t *tlsext_ellipticcurvelist; /* our list */
SSL_CTX *initial_ctx; /* initial ctx, used to store sessions */
/* Next protocol negotiation. For the client, this is the protocol that we
* sent in NextProtocol and is set when handling ServerHello extensions.
*
* For a server, this is the client's selected_protocol from NextProtocol and
* is set when handling the NextProtocol message, before the Finished
* message. */
uint8_t *next_proto_negotiated;
size_t next_proto_negotiated_len;
/* srtp_profiles is the list of configured SRTP protection profiles for
* DTLS-SRTP. */
STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;
/* srtp_profile is the selected SRTP protection profile for
* DTLS-SRTP. */
const SRTP_PROTECTION_PROFILE *srtp_profile;
/* Copied from the SSL_CTX. For a server, means that we'll accept Channel IDs
* from clients. For a client, means that we'll advertise support. */
char tlsext_channel_id_enabled;
/* The client's Channel ID private key. */
EVP_PKEY *tlsext_channel_id_private;
/* Enable signed certificate time stamps. Currently client only. */
char signed_cert_timestamps_enabled;
/* ocsp_stapling_enabled is only used by client connections and indicates
* whether OCSP stapling will be requested. */
char ocsp_stapling_enabled;
/* For a client, this contains the list of supported protocols in wire
* format. */
uint8_t *alpn_client_proto_list;
unsigned alpn_client_proto_list_len;
/* accept_peer_renegotiations, if one, accepts renegotiation attempts from the
* peer. Otherwise, they will be rejected with a fatal error. */
char accept_peer_renegotiations;
/* These fields are always NULL and exist only to keep wpa_supplicant happy
* about the change to EVP_AEAD. They are only needed for EAP-FAST, which we
* don't support. */
EVP_CIPHER_CTX *enc_read_ctx;
EVP_MD_CTX *read_hash;
};
/* compatibility */
#define SSL_set_app_data(s, arg) (SSL_set_ex_data(s, 0, (char *)arg))
#define SSL_get_app_data(s) (SSL_get_ex_data(s, 0))
#define SSL_SESSION_set_app_data(s, a) \
(SSL_SESSION_set_ex_data(s, 0, (char *)a))
#define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s, 0))
#define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx, 0))
#define SSL_CTX_set_app_data(ctx, arg) \
(SSL_CTX_set_ex_data(ctx, 0, (char *)arg))
/* The following are the possible values for ssl->state are are used to
* indicate where we are up to in the SSL connection establishment. The macros
* that follow are about the only things you should need to use and even then,
* only when using non-blocking IO. It can also be useful to work out where you
* were when the connection failed */
#define SSL_ST_CONNECT 0x1000
#define SSL_ST_ACCEPT 0x2000
#define SSL_ST_MASK 0x0FFF
#define SSL_ST_INIT (SSL_ST_CONNECT | SSL_ST_ACCEPT)
#define SSL_ST_OK 0x03
#define SSL_ST_RENEGOTIATE (0x04 | SSL_ST_INIT)
#define SSL_CB_LOOP 0x01
#define SSL_CB_EXIT 0x02
#define SSL_CB_READ 0x04
#define SSL_CB_WRITE 0x08
#define SSL_CB_ALERT 0x4000 /* used in callback */
#define SSL_CB_READ_ALERT (SSL_CB_ALERT | SSL_CB_READ)
#define SSL_CB_WRITE_ALERT (SSL_CB_ALERT | SSL_CB_WRITE)
#define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT | SSL_CB_LOOP)
#define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT | SSL_CB_EXIT)
#define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT | SSL_CB_LOOP)
#define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT | SSL_CB_EXIT)
#define SSL_CB_HANDSHAKE_START 0x10
#define SSL_CB_HANDSHAKE_DONE 0x20
/* Is the SSL_connection established? */
#define SSL_get_state(a) SSL_state(a)
#define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK)
#define SSL_in_init(a) (SSL_state(a) & SSL_ST_INIT)
#define SSL_in_connect_init(a) (SSL_state(a) & SSL_ST_CONNECT)
#define SSL_in_accept_init(a) (SSL_state(a) & SSL_ST_ACCEPT)
/* SSL_in_false_start returns one if |s| has a pending unfinished handshake that
* is in False Start. |SSL_write| may be called at this point without waiting
* for the peer, but |SSL_read| will require the handshake to be completed. */
OPENSSL_EXPORT int SSL_in_false_start(const SSL *s);
/* Obtain latest Finished message
* -- that we sent (SSL_get_finished)
* -- that we expected from peer (SSL_get_peer_finished).
* Returns length (0 == no Finished so far), copies up to 'count' bytes. */
OPENSSL_EXPORT size_t SSL_get_finished(const SSL *s, void *buf, size_t count);
OPENSSL_EXPORT size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count);
/* use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 3 options
* are 'ored' with SSL_VERIFY_PEER if they are desired */
#define SSL_VERIFY_NONE 0x00
#define SSL_VERIFY_PEER 0x01
#define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02
/* SSL_VERIFY_CLIENT_ONCE does nothing. */
#define SSL_VERIFY_CLIENT_ONCE 0x04
#define SSL_VERIFY_PEER_IF_NO_OBC 0x08
#define OpenSSL_add_ssl_algorithms() SSL_library_init()
#define SSLeay_add_ssl_algorithms() SSL_library_init()
/* For backward compatibility */
#define SSL_get_cipher(s) SSL_CIPHER_get_name(SSL_get_current_cipher(s))
#define SSL_get_cipher_bits(s, np) \
SSL_CIPHER_get_bits(SSL_get_current_cipher(s), np)
#define SSL_get_cipher_version(s) \
SSL_CIPHER_get_version(SSL_get_current_cipher(s))
#define SSL_get_cipher_name(s) SSL_CIPHER_get_name(SSL_get_current_cipher(s))
#define SSL_get_time(a) SSL_SESSION_get_time(a)
#define SSL_set_time(a, b) SSL_SESSION_set_time((a), (b))
#define SSL_get_timeout(a) SSL_SESSION_get_timeout(a)
#define SSL_set_timeout(a, b) SSL_SESSION_set_timeout((a), (b))
#define d2i_SSL_SESSION_bio(bp, s_id) \
ASN1_d2i_bio_of(SSL_SESSION, SSL_SESSION_new, d2i_SSL_SESSION, bp, s_id)
#define i2d_SSL_SESSION_bio(bp, s_id) \
ASN1_i2d_bio_of(SSL_SESSION, i2d_SSL_SESSION, bp, s_id)
DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION)
/* make_errors.go reserves error codes above 1000 for manually-assigned errors.
* This value must be kept in sync with reservedReasonCode in make_errors.h */
#define SSL_AD_REASON_OFFSET \
1000 /* offset to get SSL_R_... value from SSL_AD_... */
/* These alert types are for SSLv3 and TLSv1 */
#define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY
#define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */
#define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC /* fatal */
#define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED
#define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW
#define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE /* fatal */
#define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE /* fatal */
#define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not for TLS */
#define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE
#define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE
#define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED
#define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED
#define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN
#define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */
#define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */
#define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */
#define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR /* fatal */
#define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR
#define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION /* fatal */
#define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */
#define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY /* fatal */
#define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR /* fatal */
#define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED
#define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION
#define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION
#define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE
#define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME
#define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE \
TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE
#define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE
#define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY /* fatal */
#define SSL_AD_INAPPROPRIATE_FALLBACK SSL3_AD_INAPPROPRIATE_FALLBACK /* fatal */
#define SSL_ERROR_NONE 0
#define SSL_ERROR_SSL 1
#define SSL_ERROR_WANT_READ 2
#define SSL_ERROR_WANT_WRITE 3
#define SSL_ERROR_WANT_X509_LOOKUP 4
#define SSL_ERROR_SYSCALL 5 /* look at error stack/return value/errno */
#define SSL_ERROR_ZERO_RETURN 6
#define SSL_ERROR_WANT_CONNECT 7
#define SSL_ERROR_WANT_ACCEPT 8
#define SSL_ERROR_WANT_CHANNEL_ID_LOOKUP 9
#define SSL_ERROR_PENDING_SESSION 11
#define SSL_ERROR_PENDING_CERTIFICATE 12
#define SSL_ERROR_WANT_PRIVATE_KEY_OPERATION 13
/* DTLSv1_get_timeout queries the next DTLS handshake timeout. If there is a
* timeout in progress, it sets |*out| to the time remaining and returns one.
* Otherwise, it returns zero.
*
* When the timeout expires, call |DTLSv1_handle_timeout| to handle the
* retransmit behavior.
*
* NOTE: This function must be queried again whenever the handshake state
* machine changes, including when |DTLSv1_handle_timeout| is called. */
OPENSSL_EXPORT int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out);
/* DTLSv1_handle_timeout is called when a DTLS handshake timeout expires. If no
* timeout had expired, it returns 0. Otherwise, it retransmits the previous
* flight of handshake messages and returns 1. If too many timeouts had expired
* without progress or an error occurs, it returns -1.
*
* NOTE: The caller's external timer should be compatible with the one |ssl|
* queries within some fudge factor. Otherwise, the call will be a no-op, but
* |DTLSv1_get_timeout| will return an updated timeout.
*
* WARNING: This function breaks the usual return value convention. */
OPENSSL_EXPORT int DTLSv1_handle_timeout(SSL *ssl);
/* SSL_session_reused returns one if |ssl| performed an abbreviated handshake
* and zero otherwise.
*
* TODO(davidben): Hammer down the semantics of this API while a handshake,
* initial or renego, is in progress. */
OPENSSL_EXPORT int SSL_session_reused(const SSL *ssl);
/* SSL_total_renegotiations returns the total number of renegotiation handshakes
* peformed by |ssl|. This includes the pending renegotiation, if any. */
OPENSSL_EXPORT int SSL_total_renegotiations(const SSL *ssl);
/* SSL_CTX_set_tmp_dh configures |ctx| to use the group from |dh| as the group
* for DHE. Only the group is used, so |dh| needn't have a keypair. It returns
* one on success and zero on error. */
OPENSSL_EXPORT int SSL_CTX_set_tmp_dh(SSL_CTX *ctx, const DH *dh);
/* SSL_set_tmp_dh configures |ssl| to use the group from |dh| as the group for
* DHE. Only the group is used, so |dh| needn't have a keypair. It returns one
* on success and zero on error. */
OPENSSL_EXPORT int SSL_set_tmp_dh(SSL *ssl, const DH *dh);
/* SSL_CTX_set_tmp_ecdh configures |ctx| to use the curve from |ecdh| as the
* curve for ephemeral ECDH keys. For historical reasons, this API expects an
* |EC_KEY|, but only the curve is used. It returns one on success and zero on
* error. If unset, an appropriate curve will be chosen automatically. (This is
* recommended.) */
OPENSSL_EXPORT int SSL_CTX_set_tmp_ecdh(SSL_CTX *ctx, const EC_KEY *ec_key);
/* SSL_set_tmp_ecdh configures |ssl| to use the curve from |ecdh| as the curve
* for ephemeral ECDH keys. For historical reasons, this API expects an
* |EC_KEY|, but only the curve is used. It returns one on success and zero on
* error. If unset, an appropriate curve will be chosen automatically. (This is
* recommended.) */
OPENSSL_EXPORT int SSL_set_tmp_ecdh(SSL *ssl, const EC_KEY *ec_key);
/* SSL_CTX_enable_tls_channel_id either configures a TLS server to accept TLS
* client IDs from clients, or configures a client to send TLS client IDs to
* a server. It returns one. */
OPENSSL_EXPORT int SSL_CTX_enable_tls_channel_id(SSL_CTX *ctx);
/* SSL_enable_tls_channel_id either configures a TLS server to accept TLS
* client IDs from clients, or configure a client to send TLS client IDs to
* server. It returns one. */
OPENSSL_EXPORT int SSL_enable_tls_channel_id(SSL *ssl);
/* SSL_CTX_set1_tls_channel_id configures a TLS client to send a TLS Channel ID
* to compatible servers. |private_key| must be a P-256 EC key. It returns one
* on success and zero on error. */
OPENSSL_EXPORT int SSL_CTX_set1_tls_channel_id(SSL_CTX *ctx,
EVP_PKEY *private_key);
/* SSL_set1_tls_channel_id configures a TLS client to send a TLS Channel ID to
* compatible servers. |private_key| must be a P-256 EC key. It returns one on
* success and zero on error. */
OPENSSL_EXPORT int SSL_set1_tls_channel_id(SSL *ssl, EVP_PKEY *private_key);
/* SSL_get_tls_channel_id gets the client's TLS Channel ID from a server SSL*
* and copies up to the first |max_out| bytes into |out|. The Channel ID
* consists of the client's P-256 public key as an (x,y) pair where each is a
* 32-byte, big-endian field element. It returns 0 if the client didn't offer a
* Channel ID and the length of the complete Channel ID otherwise. */
OPENSSL_EXPORT size_t SSL_get_tls_channel_id(SSL *ssl, uint8_t *out,
size_t max_out);
/* SSL_get0_certificate_types, for a client, sets |*out_types| to an array
* containing the client certificate types requested by a server. It returns the
* length of the array. */
OPENSSL_EXPORT size_t SSL_get0_certificate_types(SSL *ssl,
const uint8_t **out_types);
/* SSL_CTX_set1_curves sets the preferred curves for |ctx| to be |curves|. Each
* element of |curves| should be a curve nid. It returns one on success and
* zero on failure. */
OPENSSL_EXPORT int SSL_CTX_set1_curves(SSL_CTX *ctx, const int *curves,
size_t curves_len);
/* SSL_set1_curves sets the preferred curves for |ssl| to be |curves|. Each
* element of |curves| should be a curve nid. It returns one on success and
* zero on failure. */
OPENSSL_EXPORT int SSL_set1_curves(SSL *ssl, const int *curves,
size_t curves_len);
OPENSSL_EXPORT int SSL_CTX_set_cipher_list(SSL_CTX *, const char *str);
OPENSSL_EXPORT int SSL_CTX_set_cipher_list_tls11(SSL_CTX *, const char *str);
OPENSSL_EXPORT long SSL_CTX_set_timeout(SSL_CTX *ctx, long t);
OPENSSL_EXPORT long SSL_CTX_get_timeout(const SSL_CTX *ctx);
OPENSSL_EXPORT X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *);
OPENSSL_EXPORT void SSL_CTX_set_cert_store(SSL_CTX *, X509_STORE *);
OPENSSL_EXPORT int SSL_want(const SSL *s);
OPENSSL_EXPORT void SSL_CTX_flush_sessions(SSL_CTX *ctx, long tm);
/* SSL_get_current_cipher returns the cipher used in the current outgoing
* connection state, or NULL if the null cipher is active. */
OPENSSL_EXPORT const SSL_CIPHER *SSL_get_current_cipher(const SSL *s);
OPENSSL_EXPORT int SSL_get_fd(const SSL *s);
OPENSSL_EXPORT int SSL_get_rfd(const SSL *s);
OPENSSL_EXPORT int SSL_get_wfd(const SSL *s);
OPENSSL_EXPORT const char *SSL_get_cipher_list(const SSL *s, int n);
OPENSSL_EXPORT int SSL_pending(const SSL *s);
OPENSSL_EXPORT int SSL_set_fd(SSL *s, int fd);
OPENSSL_EXPORT int SSL_set_rfd(SSL *s, int fd);
OPENSSL_EXPORT int SSL_set_wfd(SSL *s, int fd);
OPENSSL_EXPORT void SSL_set_bio(SSL *s, BIO *rbio, BIO *wbio);
OPENSSL_EXPORT BIO *SSL_get_rbio(const SSL *s);
OPENSSL_EXPORT BIO *SSL_get_wbio(const SSL *s);
OPENSSL_EXPORT int SSL_set_cipher_list(SSL *s, const char *str);
OPENSSL_EXPORT int SSL_get_verify_mode(const SSL *s);
OPENSSL_EXPORT int SSL_get_verify_depth(const SSL *s);
OPENSSL_EXPORT int (*SSL_get_verify_callback(const SSL *s))(int,
X509_STORE_CTX *);
OPENSSL_EXPORT void SSL_set_verify(SSL *s, int mode,
int (*callback)(int ok,
X509_STORE_CTX *ctx));
OPENSSL_EXPORT void SSL_set_verify_depth(SSL *s, int depth);
OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file);
OPENSSL_EXPORT int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *
stackCAs,
const char *file);
OPENSSL_EXPORT int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *
stackCAs,
const char *dir);
/* SSL_load_error_strings does nothing. */
OPENSSL_EXPORT void SSL_load_error_strings(void);
OPENSSL_EXPORT const char *SSL_state_string(const SSL *s);
OPENSSL_EXPORT const char *SSL_state_string_long(const SSL *s);
OPENSSL_EXPORT long SSL_SESSION_get_time(const SSL_SESSION *s);
OPENSSL_EXPORT long SSL_SESSION_set_time(SSL_SESSION *s, long t);
OPENSSL_EXPORT long SSL_SESSION_get_timeout(const SSL_SESSION *s);
OPENSSL_EXPORT long SSL_SESSION_set_timeout(SSL_SESSION *s, long t);
/* SSL_SESSION_get_key_exchange_info returns a value that describes the
* strength of the asymmetric operation that provides confidentiality to
* |session|. Its interpretation depends on the operation used. See the
* documentation for this value in the |SSL_SESSION| structure. */
OPENSSL_EXPORT uint32_t SSL_SESSION_get_key_exchange_info(SSL_SESSION *session);
OPENSSL_EXPORT X509 *SSL_SESSION_get0_peer(SSL_SESSION *s);
OPENSSL_EXPORT int SSL_SESSION_set1_id_context(SSL_SESSION *s,
const uint8_t *sid_ctx,
unsigned int sid_ctx_len);
OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_new(void);
OPENSSL_EXPORT const uint8_t *SSL_SESSION_get_id(const SSL_SESSION *s,
unsigned int *len);
OPENSSL_EXPORT int SSL_SESSION_print_fp(FILE *fp, const SSL_SESSION *ses);
OPENSSL_EXPORT int SSL_SESSION_print(BIO *fp, const SSL_SESSION *ses);
/* SSL_SESSION_up_ref, if |session| is not NULL, increments the reference count
* of |session|. It then returns |session|. */
OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_up_ref(SSL_SESSION *session);
/* SSL_SESSION_free decrements the reference count of |session|. If it reaches
* zero, all data referenced by |session| and |session| itself are released. */
OPENSSL_EXPORT void SSL_SESSION_free(SSL_SESSION *session);
OPENSSL_EXPORT int SSL_set_session(SSL *to, SSL_SESSION *session);
OPENSSL_EXPORT int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c);
OPENSSL_EXPORT int SSL_CTX_remove_session(SSL_CTX *, SSL_SESSION *c);
OPENSSL_EXPORT int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB);
OPENSSL_EXPORT int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB);
OPENSSL_EXPORT int SSL_has_matching_session_id(const SSL *ssl,
const uint8_t *id,
unsigned int id_len);
/* SSL_SESSION_to_bytes serializes |in| into a newly allocated buffer and sets
* |*out_data| to that buffer and |*out_len| to its length. The caller takes
* ownership of the buffer and must call |OPENSSL_free| when done. It returns
* one on success and zero on error. */
OPENSSL_EXPORT int SSL_SESSION_to_bytes(SSL_SESSION *in, uint8_t **out_data,
size_t *out_len);
/* SSL_SESSION_to_bytes_for_ticket serializes |in|, but excludes the session
* identification information, namely the session ID and ticket. */
OPENSSL_EXPORT int SSL_SESSION_to_bytes_for_ticket(SSL_SESSION *in,
uint8_t **out_data,
size_t *out_len);
/* SSL_SESSION_from_bytes parses |in_len| bytes from |in| as an SSL_SESSION. It
* returns a newly-allocated |SSL_SESSION| on success or NULL on error. */
OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_from_bytes(const uint8_t *in,
size_t in_len);
/* Deprecated: i2d_SSL_SESSION serializes |in| to the bytes pointed to by
* |*pp|. On success, it returns the number of bytes written and advances |*pp|
* by that many bytes. On failure, it returns -1. If |pp| is NULL, no bytes are
* written and only the length is returned.
*
* Use |SSL_SESSION_to_bytes| instead. */
OPENSSL_EXPORT int i2d_SSL_SESSION(SSL_SESSION *in, uint8_t **pp);
/* Deprecated: d2i_SSL_SESSION parses a serialized session from the |length|
* bytes pointed to by |*pp|. It returns the new |SSL_SESSION| and advances
* |*pp| by the number of bytes consumed on success and NULL on failure. The
* caller takes ownership of the new session and must call |SSL_SESSION_free|
* when done.
*
* If |a| is non-NULL, |*a| is released and set the new |SSL_SESSION|.
*
* Use |SSL_SESSION_from_bytes| instead. */
OPENSSL_EXPORT SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a, const uint8_t **pp,
long length);
OPENSSL_EXPORT X509 *SSL_get_peer_certificate(const SSL *s);
OPENSSL_EXPORT STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *s);
OPENSSL_EXPORT int SSL_CTX_get_verify_mode(const SSL_CTX *ctx);
OPENSSL_EXPORT int SSL_CTX_get_verify_depth(const SSL_CTX *ctx);
OPENSSL_EXPORT int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(
int, X509_STORE_CTX *);
OPENSSL_EXPORT void SSL_CTX_set_verify(SSL_CTX *ctx, int mode,
int (*callback)(int, X509_STORE_CTX *));
OPENSSL_EXPORT void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth);
OPENSSL_EXPORT void SSL_CTX_set_cert_verify_callback(
SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *, void *), void *arg);
OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx,
pem_password_cb *cb);
OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx,
void *u);
OPENSSL_EXPORT int SSL_CTX_set_session_id_context(SSL_CTX *ctx,
const uint8_t *sid_ctx,
unsigned int sid_ctx_len);
OPENSSL_EXPORT int SSL_set_session_id_context(SSL *ssl, const uint8_t *sid_ctx,
unsigned int sid_ctx_len);
OPENSSL_EXPORT int SSL_CTX_set_purpose(SSL_CTX *s, int purpose);
OPENSSL_EXPORT int SSL_set_purpose(SSL *s, int purpose);
OPENSSL_EXPORT int SSL_CTX_set_trust(SSL_CTX *s, int trust);
OPENSSL_EXPORT int SSL_set_trust(SSL *s, int trust);
OPENSSL_EXPORT int SSL_CTX_set1_param(SSL_CTX *ctx, X509_VERIFY_PARAM *vpm);
OPENSSL_EXPORT int SSL_set1_param(SSL *ssl, X509_VERIFY_PARAM *vpm);
OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_CTX_get0_param(SSL_CTX *ctx);
OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_get0_param(SSL *ssl);
OPENSSL_EXPORT int SSL_accept(SSL *ssl);
OPENSSL_EXPORT int SSL_connect(SSL *ssl);
OPENSSL_EXPORT int SSL_read(SSL *ssl, void *buf, int num);
OPENSSL_EXPORT int SSL_peek(SSL *ssl, void *buf, int num);
OPENSSL_EXPORT int SSL_write(SSL *ssl, const void *buf, int num);
OPENSSL_EXPORT int SSL_get_error(const SSL *s, int ret_code);
/* SSL_get_version returns a string describing the TLS version used by |s|. For
* example, "TLSv1.2" or "SSLv3". */
OPENSSL_EXPORT const char *SSL_get_version(const SSL *s);
/* SSL_SESSION_get_version returns a string describing the TLS version used by
* |sess|. For example, "TLSv1.2" or "SSLv3". */
OPENSSL_EXPORT const char *SSL_SESSION_get_version(const SSL_SESSION *sess);
/* SSL_get_curve_name returns a human-readable name for the elliptic curve
* specified by the given TLS curve id, or NULL if the curve if unknown. */
OPENSSL_EXPORT const char* SSL_get_curve_name(uint16_t curve_id);
OPENSSL_EXPORT STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s);
OPENSSL_EXPORT int SSL_do_handshake(SSL *s);
/* SSL_renegotiate_pending returns one if |ssl| is in the middle of a
* renegotiation. */
OPENSSL_EXPORT int SSL_renegotiate_pending(SSL *ssl);
OPENSSL_EXPORT int SSL_shutdown(SSL *s);
OPENSSL_EXPORT const char *SSL_alert_type_string_long(int value);
OPENSSL_EXPORT const char *SSL_alert_type_string(int value);
OPENSSL_EXPORT const char *SSL_alert_desc_string_long(int value);
OPENSSL_EXPORT const char *SSL_alert_desc_string(int value);
OPENSSL_EXPORT void SSL_set_client_CA_list(SSL *s,
STACK_OF(X509_NAME) *name_list);
OPENSSL_EXPORT void SSL_CTX_set_client_CA_list(SSL_CTX *ctx,
STACK_OF(X509_NAME) *name_list);
OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s);
OPENSSL_EXPORT STACK_OF(X509_NAME) *
SSL_CTX_get_client_CA_list(const SSL_CTX *s);
OPENSSL_EXPORT int SSL_add_client_CA(SSL *ssl, X509 *x);
OPENSSL_EXPORT int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *x);
OPENSSL_EXPORT long SSL_get_default_timeout(const SSL *s);
OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk);
OPENSSL_EXPORT void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx, int mode);
OPENSSL_EXPORT int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx);
OPENSSL_EXPORT void SSL_set_quiet_shutdown(SSL *ssl, int mode);
OPENSSL_EXPORT int SSL_get_quiet_shutdown(const SSL *ssl);
OPENSSL_EXPORT void SSL_set_shutdown(SSL *ssl, int mode);
OPENSSL_EXPORT int SSL_get_shutdown(const SSL *ssl);
OPENSSL_EXPORT int SSL_version(const SSL *ssl);
OPENSSL_EXPORT int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx);
OPENSSL_EXPORT int SSL_CTX_load_verify_locations(SSL_CTX *ctx,
const char *CAfile,
const char *CApath);
#define SSL_get0_session SSL_get_session /* just peek at pointer */
OPENSSL_EXPORT SSL_SESSION *SSL_get_session(const SSL *ssl);
OPENSSL_EXPORT SSL_SESSION *SSL_get1_session(
SSL *ssl); /* obtain a reference count */
OPENSSL_EXPORT SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl);
OPENSSL_EXPORT SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx);
OPENSSL_EXPORT void SSL_set_info_callback(SSL *ssl,
void (*cb)(const SSL *ssl, int type,
int val));
OPENSSL_EXPORT void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl,
int type, int val);
OPENSSL_EXPORT int SSL_state(const SSL *ssl);
OPENSSL_EXPORT void SSL_set_verify_result(SSL *ssl, long v);
OPENSSL_EXPORT long SSL_get_verify_result(const SSL *ssl);
OPENSSL_EXPORT int SSL_set_ex_data(SSL *ssl, int idx, void *data);
OPENSSL_EXPORT void *SSL_get_ex_data(const SSL *ssl, int idx);
OPENSSL_EXPORT int SSL_get_ex_new_index(long argl, void *argp,
CRYPTO_EX_new *new_func,
CRYPTO_EX_dup *dup_func,
CRYPTO_EX_free *free_func);
OPENSSL_EXPORT int SSL_SESSION_set_ex_data(SSL_SESSION *ss, int idx,
void *data);
OPENSSL_EXPORT void *SSL_SESSION_get_ex_data(const SSL_SESSION *ss, int idx);
OPENSSL_EXPORT int SSL_SESSION_get_ex_new_index(long argl, void *argp,
CRYPTO_EX_new *new_func,
CRYPTO_EX_dup *dup_func,
CRYPTO_EX_free *free_func);
OPENSSL_EXPORT int SSL_CTX_set_ex_data(SSL_CTX *ssl, int idx, void *data);
OPENSSL_EXPORT void *SSL_CTX_get_ex_data(const SSL_CTX *ssl, int idx);
OPENSSL_EXPORT int SSL_CTX_get_ex_new_index(long argl, void *argp,
CRYPTO_EX_new *new_func,
CRYPTO_EX_dup *dup_func,
CRYPTO_EX_free *free_func);
OPENSSL_EXPORT int SSL_get_ex_data_X509_STORE_CTX_idx(void);
/* SSL_CTX_sess_set_cache_size sets the maximum size of |ctx|'s session cache to
* |size|. It returns the previous value. */
OPENSSL_EXPORT unsigned long SSL_CTX_sess_set_cache_size(SSL_CTX *ctx,
unsigned long size);
/* SSL_CTX_sess_get_cache_size returns the maximum size of |ctx|'s session
* cache. */
OPENSSL_EXPORT unsigned long SSL_CTX_sess_get_cache_size(const SSL_CTX *ctx);
/* SSL_SESS_CACHE_* are the possible session cache mode bits.
* TODO(davidben): Document. */
#define SSL_SESS_CACHE_OFF 0x0000
#define SSL_SESS_CACHE_CLIENT 0x0001
#define SSL_SESS_CACHE_SERVER 0x0002
#define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_SERVER)
#define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080
#define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100
#define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200
#define SSL_SESS_CACHE_NO_INTERNAL \
(SSL_SESS_CACHE_NO_INTERNAL_LOOKUP | SSL_SESS_CACHE_NO_INTERNAL_STORE)
/* SSL_CTX_set_session_cache_mode sets the session cache mode bits for |ctx| to
* |mode|. It returns the previous value. */
OPENSSL_EXPORT int SSL_CTX_set_session_cache_mode(SSL_CTX *ctx, int mode);
/* SSL_CTX_get_session_cache_mode returns the session cache mode bits for
* |ctx| */
OPENSSL_EXPORT int SSL_CTX_get_session_cache_mode(const SSL_CTX *ctx);
/* SSL_CTX_get_max_cert_list returns the maximum length, in bytes, of a peer
* certificate chain accepted by |ctx|. */
OPENSSL_EXPORT size_t SSL_CTX_get_max_cert_list(const SSL_CTX *ctx);
/* SSL_CTX_set_max_cert_list sets the maximum length, in bytes, of a peer
* certificate chain to |max_cert_list|. This affects how much memory may be
* consumed during the handshake. */
OPENSSL_EXPORT void SSL_CTX_set_max_cert_list(SSL_CTX *ctx,
size_t max_cert_list);
/* SSL_get_max_cert_list returns the maximum length, in bytes, of a peer
* certificate chain accepted by |ssl|. */
OPENSSL_EXPORT size_t SSL_get_max_cert_list(const SSL *ssl);
/* SSL_set_max_cert_list sets the maximum length, in bytes, of a peer
* certificate chain to |max_cert_list|. This affects how much memory may be
* consumed during the handshake. */
OPENSSL_EXPORT void SSL_set_max_cert_list(SSL *ssl, size_t max_cert_list);
/* SSL_CTX_set_max_send_fragment sets the maximum length, in bytes, of records
* sent by |ctx|. Beyond this length, handshake messages and application data
* will be split into multiple records. */
OPENSSL_EXPORT void SSL_CTX_set_max_send_fragment(SSL_CTX *ctx,
size_t max_send_fragment);
/* SSL_set_max_send_fragment sets the maximum length, in bytes, of records
* sent by |ssl|. Beyond this length, handshake messages and application data
* will be split into multiple records. */
OPENSSL_EXPORT void SSL_set_max_send_fragment(SSL *ssl,
size_t max_send_fragment);
/* SSL_CTX_set_tmp_dh_callback configures |ctx| to use |callback| to determine
* the group for DHE ciphers. |callback| should ignore |is_export| and
* |keylength| and return a |DH| of the selected group or NULL on error. Only
* the parameters are used, so the |DH| needn't have a generated keypair.
*
* WARNING: The caller does not take ownership of the resulting |DH|, so
* |callback| must save and release the object elsewhere. */
OPENSSL_EXPORT void SSL_CTX_set_tmp_dh_callback(
SSL_CTX *ctx, DH *(*callback)(SSL *ssl, int is_export, int keylength));
/* SSL_set_tmp_dh_callback configures |ssl| to use |callback| to determine the
* group for DHE ciphers. |callback| should ignore |is_export| and |keylength|
* and return a |DH| of the selected group or NULL on error. Only the
* parameters are used, so the |DH| needn't have a generated keypair.
*
* WARNING: The caller does not take ownership of the resulting |DH|, so
* |callback| must save and release the object elsewhere. */
OPENSSL_EXPORT void SSL_set_tmp_dh_callback(SSL *ssl,
DH *(*dh)(SSL *ssl, int is_export,
int keylength));
/* SSL_CTX_set_tmp_ecdh_callback configures |ctx| to use |callback| to determine
* the curve for ephemeral ECDH keys. |callback| should ignore |is_export| and
* |keylength| and return an |EC_KEY| of the selected curve or NULL on
* error. Only the curve is used, so the |EC_KEY| needn't have a generated
* keypair.
*
* If the callback is unset, an appropriate curve will be chosen automatically.
* (This is recommended.)
*
* WARNING: The caller does not take ownership of the resulting |EC_KEY|, so
* |callback| must save and release the object elsewhere. */
OPENSSL_EXPORT void SSL_CTX_set_tmp_ecdh_callback(
SSL_CTX *ctx, EC_KEY *(*callback)(SSL *ssl, int is_export, int keylength));
/* SSL_set_tmp_ecdh_callback configures |ssl| to use |callback| to determine the
* curve for ephemeral ECDH keys. |callback| should ignore |is_export| and
* |keylength| and return an |EC_KEY| of the selected curve or NULL on
* error. Only the curve is used, so the |EC_KEY| needn't have a generated
* keypair.
*
* If the callback is unset, an appropriate curve will be chosen automatically.
* (This is recommended.)
*
* WARNING: The caller does not take ownership of the resulting |EC_KEY|, so
* |callback| must save and release the object elsewhere. */
OPENSSL_EXPORT void SSL_set_tmp_ecdh_callback(
SSL *ssl, EC_KEY *(*callback)(SSL *ssl, int is_export, int keylength));
typedef void COMP_METHOD;
/* SSL_get_current_compression returns NULL. */
OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_compression(SSL *s);
/* SSL_get_current_expansion returns NULL. */
OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_expansion(SSL *s);
OPENSSL_EXPORT int SSL_cache_hit(SSL *s);
OPENSSL_EXPORT int SSL_is_server(SSL *s);
/* SSL_CTX_set_dos_protection_cb sets a callback that is called once the
* resumption decision for a ClientHello has been made. It can return 1 to
* allow the handshake to continue or zero to cause the handshake to abort. */
OPENSSL_EXPORT void SSL_CTX_set_dos_protection_cb(
SSL_CTX *ctx, int (*cb)(const struct ssl_early_callback_ctx *));
/* SSL_get_structure_sizes returns the sizes of the SSL, SSL_CTX and
* SSL_SESSION structures so that a test can ensure that outside code agrees on
* these values. */
OPENSSL_EXPORT void SSL_get_structure_sizes(size_t *ssl_size,
size_t *ssl_ctx_size,
size_t *ssl_session_size);
/* ERR_load_SSL_strings does nothing. */
OPENSSL_EXPORT void ERR_load_SSL_strings(void);
/* SSL_get_rc4_state sets |*read_key| and |*write_key| to the RC4 states for
* the read and write directions. It returns one on success or zero if |ssl|
* isn't using an RC4-based cipher suite. */
OPENSSL_EXPORT int SSL_get_rc4_state(const SSL *ssl, const RC4_KEY **read_key,
const RC4_KEY **write_key);
/* Deprecated functions. */
/* SSL_CIPHER_description writes a description of |cipher| into |buf| and
* returns |buf|. If |buf| is NULL, it returns a newly allocated string, to be
* freed with |OPENSSL_free|, or NULL on error.
*
* The description includes a trailing newline and has the form:
* AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
*
* Consider |SSL_CIPHER_get_name| or |SSL_CIPHER_get_rfc_name| instead. */
OPENSSL_EXPORT const char *SSL_CIPHER_description(const SSL_CIPHER *cipher,
char *buf, int len);
/* SSL_CIPHER_get_version returns the string "TLSv1/SSLv3". */
OPENSSL_EXPORT const char *SSL_CIPHER_get_version(const SSL_CIPHER *cipher);
/* SSL_COMP_get_compression_methods returns NULL. */
OPENSSL_EXPORT COMP_METHOD *SSL_COMP_get_compression_methods(void);
/* SSL_COMP_add_compression_method returns one. */
OPENSSL_EXPORT int SSL_COMP_add_compression_method(int id, COMP_METHOD *cm);
/* SSL_COMP_get_name returns NULL. */
OPENSSL_EXPORT const char *SSL_COMP_get_name(const COMP_METHOD *comp);
/* SSLv23_method calls |TLS_method|. */
OPENSSL_EXPORT const SSL_METHOD *SSLv23_method(void);
/* Version-specific methods behave exactly like |TLS_method| and |DTLS_method|
* except they also call |SSL_CTX_set_min_version| and |SSL_CTX_set_max_version|
* to lock connections to that protocol version. */
OPENSSL_EXPORT const SSL_METHOD *SSLv3_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLSv1_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_method(void);
/* Client- and server-specific methods call their corresponding generic
* methods. */
OPENSSL_EXPORT const SSL_METHOD *SSLv23_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *SSLv23_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *SSLv3_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *SSLv3_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLS_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLS_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLSv1_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLSv1_client_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_server_method(void);
OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_client_method(void);
/* SSL_clear resets |ssl| to allow another connection and returns one on success
* or zero on failure. It returns most configuration state but releases memory
* associated with the current connection.
*
* Free |ssl| and create a new one instead. */
OPENSSL_EXPORT int SSL_clear(SSL *ssl);
/* SSL_CTX_set_tmp_rsa_callback does nothing. */
OPENSSL_EXPORT void SSL_CTX_set_tmp_rsa_callback(
SSL_CTX *ctx, RSA *(*cb)(SSL *ssl, int is_export, int keylength));
/* SSL_set_tmp_rsa_callback does nothing. */
OPENSSL_EXPORT void SSL_set_tmp_rsa_callback(SSL *ssl,
RSA *(*cb)(SSL *ssl, int is_export,
int keylength));
/* SSL_CTX_sess_connect returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_connect(const SSL_CTX *ctx);
/* SSL_CTX_sess_connect_good returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_connect_good(const SSL_CTX *ctx);
/* SSL_CTX_sess_connect_renegotiate returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_connect_renegotiate(const SSL_CTX *ctx);
/* SSL_CTX_sess_accept returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_accept(const SSL_CTX *ctx);
/* SSL_CTX_sess_accept_renegotiate returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_accept_renegotiate(const SSL_CTX *ctx);
/* SSL_CTX_sess_accept_good returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_accept_good(const SSL_CTX *ctx);
/* SSL_CTX_sess_hits returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_hits(const SSL_CTX *ctx);
/* SSL_CTX_sess_cb_hits returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_cb_hits(const SSL_CTX *ctx);
/* SSL_CTX_sess_misses returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_misses(const SSL_CTX *ctx);
/* SSL_CTX_sess_timeouts returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_timeouts(const SSL_CTX *ctx);
/* SSL_CTX_sess_cache_full returns zero. */
OPENSSL_EXPORT int SSL_CTX_sess_cache_full(const SSL_CTX *ctx);
/* SSL_cutthrough_complete calls |SSL_in_false_start|. */
OPENSSL_EXPORT int SSL_cutthrough_complete(const SSL *s);
/* SSL_num_renegotiations calls |SSL_total_renegotiations|. */
OPENSSL_EXPORT int SSL_num_renegotiations(const SSL *ssl);
/* SSL_CTX_need_tmp_RSA returns zero. */
OPENSSL_EXPORT int SSL_CTX_need_tmp_RSA(const SSL_CTX *ctx);
/* SSL_need_tmp_RSA returns zero. */
OPENSSL_EXPORT int SSL_need_tmp_RSA(const SSL *ssl);
/* SSL_CTX_set_tmp_rsa returns one. */
OPENSSL_EXPORT int SSL_CTX_set_tmp_rsa(SSL_CTX *ctx, const RSA *rsa);
/* SSL_set_tmp_rsa returns one. */
OPENSSL_EXPORT int SSL_set_tmp_rsa(SSL *ssl, const RSA *rsa);
/* SSL_CTX_get_read_ahead returns zero. */
OPENSSL_EXPORT int SSL_CTX_get_read_ahead(const SSL_CTX *ctx);
/* SSL_CTX_set_read_ahead does nothing. */
OPENSSL_EXPORT void SSL_CTX_set_read_ahead(SSL_CTX *ctx, int yes);
/* SSL_get_read_ahead returns zero. */
OPENSSL_EXPORT int SSL_get_read_ahead(const SSL *s);
/* SSL_set_read_ahead does nothing. */
OPENSSL_EXPORT void SSL_set_read_ahead(SSL *s, int yes);
/* SSL_renegotiate put an error on the error queue and returns zero. */
OPENSSL_EXPORT int SSL_renegotiate(SSL *ssl);
/* SSL_set_state does nothing. */
OPENSSL_EXPORT void SSL_set_state(SSL *ssl, int state);
/* Android compatibility section.
*
* These functions are declared, temporarily, for Android because
* wpa_supplicant will take a little time to sync with upstream. Outside of
* Android they'll have no definition. */
#define SSL_F_SSL_SET_SESSION_TICKET_EXT doesnt_exist
OPENSSL_EXPORT int SSL_set_session_ticket_ext(SSL *s, void *ext_data,
int ext_len);
OPENSSL_EXPORT int SSL_set_session_secret_cb(SSL *s, void *cb, void *arg);
OPENSSL_EXPORT int SSL_set_session_ticket_ext_cb(SSL *s, void *cb, void *arg);
OPENSSL_EXPORT int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method);
#define OPENSSL_VERSION_TEXT "BoringSSL"
#define SSLEAY_VERSION 0
/* SSLeay_version is a compatibility function that returns the string
* "BoringSSL". */
OPENSSL_EXPORT const char *SSLeay_version(int unused);
/* Preprocessor compatibility section.
*
* Historically, a number of APIs were implemented in OpenSSL as macros and
* constants to 'ctrl' functions. To avoid breaking #ifdefs in consumers, this
* section defines a number of legacy macros.
*
* Although using either the CTRL values or their wrapper macros in #ifdefs is
* still supported, the CTRL values may not be passed to |SSL_ctrl| and
* |SSL_CTX_ctrl|. Call the functions (previously wrapper macros) instead. */
#define DTLS_CTRL_GET_TIMEOUT doesnt_exist
#define DTLS_CTRL_HANDLE_TIMEOUT doesnt_exist
#define SSL_CTRL_CHAIN doesnt_exist
#define SSL_CTRL_CHAIN_CERT doesnt_exist
#define SSL_CTRL_CHANNEL_ID doesnt_exist
#define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS doesnt_exist
#define SSL_CTRL_CLEAR_MODE doesnt_exist
#define SSL_CTRL_CLEAR_OPTIONS doesnt_exist
#define SSL_CTRL_EXTRA_CHAIN_CERT doesnt_exist
#define SSL_CTRL_GET_CHAIN_CERTS doesnt_exist
#define SSL_CTRL_GET_CHANNEL_ID doesnt_exist
#define SSL_CTRL_GET_CLIENT_CERT_TYPES doesnt_exist
#define SSL_CTRL_GET_EXTRA_CHAIN_CERTS doesnt_exist
#define SSL_CTRL_GET_MAX_CERT_LIST doesnt_exist
#define SSL_CTRL_GET_NUM_RENEGOTIATIONS doesnt_exist
#define SSL_CTRL_GET_READ_AHEAD doesnt_exist
#define SSL_CTRL_GET_RI_SUPPORT doesnt_exist
#define SSL_CTRL_GET_SESSION_REUSED doesnt_exist
#define SSL_CTRL_GET_SESS_CACHE_MODE doesnt_exist
#define SSL_CTRL_GET_SESS_CACHE_SIZE doesnt_exist
#define SSL_CTRL_GET_TLSEXT_TICKET_KEYS doesnt_exist
#define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS doesnt_exist
#define SSL_CTRL_MODE doesnt_exist
#define SSL_CTRL_NEED_TMP_RSA doesnt_exist
#define SSL_CTRL_OPTIONS doesnt_exist
#define SSL_CTRL_SESS_NUMBER doesnt_exist
#define SSL_CTRL_SET_CHANNEL_ID doesnt_exist
#define SSL_CTRL_SET_CURVES doesnt_exist
#define SSL_CTRL_SET_MAX_CERT_LIST doesnt_exist
#define SSL_CTRL_SET_MAX_SEND_FRAGMENT doesnt_exist
#define SSL_CTRL_SET_MSG_CALLBACK doesnt_exist
#define SSL_CTRL_SET_MSG_CALLBACK_ARG doesnt_exist
#define SSL_CTRL_SET_MTU doesnt_exist
#define SSL_CTRL_SET_READ_AHEAD doesnt_exist
#define SSL_CTRL_SET_SESS_CACHE_MODE doesnt_exist
#define SSL_CTRL_SET_SESS_CACHE_SIZE doesnt_exist
#define SSL_CTRL_SET_TLSEXT_HOSTNAME doesnt_exist
#define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG doesnt_exist
#define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB doesnt_exist
#define SSL_CTRL_SET_TLSEXT_TICKET_KEYS doesnt_exist
#define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB doesnt_exist
#define SSL_CTRL_SET_TMP_DH doesnt_exist
#define SSL_CTRL_SET_TMP_DH_CB doesnt_exist
#define SSL_CTRL_SET_TMP_ECDH doesnt_exist
#define SSL_CTRL_SET_TMP_ECDH_CB doesnt_exist
#define SSL_CTRL_SET_TMP_RSA doesnt_exist
#define SSL_CTRL_SET_TMP_RSA_CB doesnt_exist
#define DTLSv1_get_timeout DTLSv1_get_timeout
#define DTLSv1_handle_timeout DTLSv1_handle_timeout
#define SSL_CTX_add0_chain_cert SSL_CTX_add0_chain_cert
#define SSL_CTX_add1_chain_cert SSL_CTX_add1_chain_cert
#define SSL_CTX_add_extra_chain_cert SSL_CTX_add_extra_chain_cert
#define SSL_CTX_clear_extra_chain_certs SSL_CTX_clear_extra_chain_certs
#define SSL_CTX_clear_chain_certs SSL_CTX_clear_chain_certs
#define SSL_CTX_clear_mode SSL_CTX_clear_mode
#define SSL_CTX_clear_options SSL_CTX_clear_options
#define SSL_CTX_enable_tls_channel_id SSL_CTX_enable_tls_channel_id
#define SSL_CTX_get0_chain_certs SSL_CTX_get0_chain_certs
#define SSL_CTX_get_extra_chain_certs SSL_CTX_get_extra_chain_certs
#define SSL_CTX_get_max_cert_list SSL_CTX_get_max_cert_list
#define SSL_CTX_get_mode SSL_CTX_get_mode
#define SSL_CTX_get_options SSL_CTX_get_options
#define SSL_CTX_get_read_ahead SSL_CTX_get_read_ahead
#define SSL_CTX_get_session_cache_mode SSL_CTX_get_session_cache_mode
#define SSL_CTX_get_tlsext_ticket_keys SSL_CTX_get_tlsext_ticket_keys
#define SSL_CTX_need_tmp_RSA SSL_CTX_need_tmp_RSA
#define SSL_CTX_sess_get_cache_size SSL_CTX_sess_get_cache_size
#define SSL_CTX_sess_number SSL_CTX_sess_number
#define SSL_CTX_sess_set_cache_size SSL_CTX_sess_set_cache_size
#define SSL_CTX_set0_chain SSL_CTX_set0_chain
#define SSL_CTX_set1_chain SSL_CTX_set1_chain
#define SSL_CTX_set1_curves SSL_CTX_set1_curves
#define SSL_CTX_set1_tls_channel_id SSL_CTX_set1_tls_channel_id
#define SSL_CTX_set_max_cert_list SSL_CTX_set_max_cert_list
#define SSL_CTX_set_max_send_fragment SSL_CTX_set_max_send_fragment
#define SSL_CTX_set_mode SSL_CTX_set_mode
#define SSL_CTX_set_msg_callback_arg SSL_CTX_set_msg_callback_arg
#define SSL_CTX_set_options SSL_CTX_set_options
#define SSL_CTX_set_read_ahead SSL_CTX_set_read_ahead
#define SSL_CTX_set_session_cache_mode SSL_CTX_set_session_cache_mode
#define SSL_CTX_set_tlsext_servername_arg SSL_CTX_set_tlsext_servername_arg
#define SSL_CTX_set_tlsext_servername_callback \
SSL_CTX_set_tlsext_servername_callback
#define SSL_CTX_set_tlsext_ticket_key_cb SSL_CTX_set_tlsext_ticket_key_cb
#define SSL_CTX_set_tlsext_ticket_keys SSL_CTX_set_tlsext_ticket_keys
#define SSL_CTX_set_tmp_dh SSL_CTX_set_tmp_dh
#define SSL_CTX_set_tmp_ecdh SSL_CTX_set_tmp_ecdh
#define SSL_CTX_set_tmp_rsa SSL_CTX_set_tmp_rsa
#define SSL_add0_chain_cert SSL_add0_chain_cert
#define SSL_add1_chain_cert SSL_add1_chain_cert
#define SSL_clear_chain_certs SSL_clear_chain_certs
#define SSL_clear_mode SSL_clear_mode
#define SSL_clear_options SSL_clear_options
#define SSL_enable_tls_channel_id SSL_enable_tls_channel_id
#define SSL_get0_certificate_types SSL_get0_certificate_types
#define SSL_get0_chain_certs SSL_get0_chain_certs
#define SSL_get_max_cert_list SSL_get_max_cert_list
#define SSL_get_mode SSL_get_mode
#define SSL_get_options SSL_get_options
#define SSL_get_secure_renegotiation_support \
SSL_get_secure_renegotiation_support
#define SSL_get_tls_channel_id SSL_get_tls_channel_id
#define SSL_need_tmp_RSA SSL_need_tmp_RSA
#define SSL_num_renegotiations SSL_num_renegotiations
#define SSL_session_reused SSL_session_reused
#define SSL_set0_chain SSL_set0_chain
#define SSL_set1_chain SSL_set1_chain
#define SSL_set1_curves SSL_set1_curves
#define SSL_set1_tls_channel_id SSL_set1_tls_channel_id
#define SSL_set_max_cert_list SSL_set_max_cert_list
#define SSL_set_max_send_fragment SSL_set_max_send_fragment
#define SSL_set_mode SSL_set_mode
#define SSL_set_msg_callback_arg SSL_set_msg_callback_arg
#define SSL_set_mtu SSL_set_mtu
#define SSL_set_options SSL_set_options
#define SSL_set_tlsext_host_name SSL_set_tlsext_host_name
#define SSL_set_tmp_dh SSL_set_tmp_dh
#define SSL_set_tmp_ecdh SSL_set_tmp_ecdh
#define SSL_set_tmp_rsa SSL_set_tmp_rsa
#define SSL_total_renegotiations SSL_total_renegotiations
#if defined(__cplusplus)
} /* extern C */
#endif
/* Library consumers assume these headers are included by ssl.h, but they depend
* on ssl.h, so include them after all declarations.
*
* TODO(davidben): The separation between ssl.h and these version-specific
* headers introduces circular dependencies and is inconsistent. The function
* declarations should move to ssl.h. Many of the constants can probably be
* pruned or unexported. */
#include <openssl/ssl3.h>
#include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */
#include <openssl/srtp.h> /* Support for the use_srtp extension */
/* BEGIN ERROR CODES */
/* The following lines are auto generated by the script make_errors.go. Any
* changes made after this point may be overwritten when the script is next run.
*/
#define SSL_R_APP_DATA_IN_HANDSHAKE 100
#define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 101
#define SSL_R_BAD_ALERT 102
#define SSL_R_BAD_CHANGE_CIPHER_SPEC 103
#define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 104
#define SSL_R_BAD_DH_P_LENGTH 105
#define SSL_R_BAD_DIGEST_LENGTH 106
#define SSL_R_BAD_ECC_CERT 107
#define SSL_R_BAD_ECPOINT 108
#define SSL_R_BAD_HANDSHAKE_LENGTH 109
#define SSL_R_BAD_HANDSHAKE_RECORD 110
#define SSL_R_BAD_HELLO_REQUEST 111
#define SSL_R_BAD_LENGTH 112
#define SSL_R_BAD_PACKET_LENGTH 113
#define SSL_R_BAD_RSA_ENCRYPT 114
#define SSL_R_BAD_SIGNATURE 115
#define SSL_R_BAD_SRTP_MKI_VALUE 116
#define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST 117
#define SSL_R_BAD_SSL_FILETYPE 118
#define SSL_R_BAD_WRITE_RETRY 119
#define SSL_R_BIO_NOT_SET 120
#define SSL_R_BN_LIB 121
#define SSL_R_CANNOT_SERIALIZE_PUBLIC_KEY 122
#define SSL_R_CA_DN_LENGTH_MISMATCH 123
#define SSL_R_CA_DN_TOO_LONG 124
#define SSL_R_CCS_RECEIVED_EARLY 125
#define SSL_R_CERTIFICATE_VERIFY_FAILED 126
#define SSL_R_CERT_CB_ERROR 127
#define SSL_R_CERT_LENGTH_MISMATCH 128
#define SSL_R_CHANNEL_ID_NOT_P256 129
#define SSL_R_CHANNEL_ID_SIGNATURE_INVALID 130
#define SSL_R_CIPHER_CODE_WRONG_LENGTH 131
#define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 132
#define SSL_R_CLIENTHELLO_PARSE_FAILED 133
#define SSL_R_CLIENTHELLO_TLSEXT 134
#define SSL_R_CONNECTION_REJECTED 135
#define SSL_R_CONNECTION_TYPE_NOT_SET 136
#define SSL_R_COOKIE_MISMATCH 137
#define SSL_R_D2I_ECDSA_SIG 138
#define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 139
#define SSL_R_DATA_LENGTH_TOO_LONG 140
#define SSL_R_DECODE_ERROR 141
#define SSL_R_DECRYPTION_FAILED 142
#define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 143
#define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 144
#define SSL_R_DIGEST_CHECK_FAILED 145
#define SSL_R_DTLS_MESSAGE_TOO_BIG 146
#define SSL_R_ECC_CERT_NOT_FOR_SIGNING 147
#define SSL_R_EMPTY_SRTP_PROTECTION_PROFILE_LIST 148
#define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 149
#define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 150
#define SSL_R_EVP_DIGESTSIGNFINAL_FAILED 151
#define SSL_R_EVP_DIGESTSIGNINIT_FAILED 152
#define SSL_R_EXCESSIVE_MESSAGE_SIZE 153
#define SSL_R_EXTRA_DATA_IN_MESSAGE 154
#define SSL_R_GOT_A_FIN_BEFORE_A_CCS 155
#define SSL_R_GOT_CHANNEL_ID_BEFORE_A_CCS 156
#define SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS 157
#define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION 158
#define SSL_R_HANDSHAKE_FAILURE_ON_CLIENT_HELLO 159
#define SSL_R_HANDSHAKE_RECORD_BEFORE_CCS 160
#define SSL_R_HTTPS_PROXY_REQUEST 161
#define SSL_R_HTTP_REQUEST 162
#define SSL_R_INAPPROPRIATE_FALLBACK 163
#define SSL_R_INVALID_COMMAND 164
#define SSL_R_INVALID_MESSAGE 165
#define SSL_R_INVALID_SSL_SESSION 166
#define SSL_R_INVALID_TICKET_KEYS_LENGTH 167
#define SSL_R_LENGTH_MISMATCH 168
#define SSL_R_LIBRARY_HAS_NO_CIPHERS 169
#define SSL_R_MISSING_DH_KEY 170
#define SSL_R_MISSING_ECDSA_SIGNING_CERT 171
#define SSL_R_MISSING_RSA_CERTIFICATE 172
#define SSL_R_MISSING_RSA_ENCRYPTING_CERT 173
#define SSL_R_MISSING_RSA_SIGNING_CERT 174
#define SSL_R_MISSING_TMP_DH_KEY 175
#define SSL_R_MISSING_TMP_ECDH_KEY 176
#define SSL_R_MIXED_SPECIAL_OPERATOR_WITH_GROUPS 177
#define SSL_R_MTU_TOO_SMALL 178
#define SSL_R_NESTED_GROUP 179
#define SSL_R_NO_CERTIFICATES_RETURNED 180
#define SSL_R_NO_CERTIFICATE_ASSIGNED 181
#define SSL_R_NO_CERTIFICATE_SET 182
#define SSL_R_NO_CIPHERS_AVAILABLE 183
#define SSL_R_NO_CIPHERS_PASSED 184
#define SSL_R_NO_CIPHERS_SPECIFIED 185
#define SSL_R_NO_CIPHER_MATCH 186
#define SSL_R_NO_COMPRESSION_SPECIFIED 187
#define SSL_R_NO_METHOD_SPECIFIED 188
#define SSL_R_NO_P256_SUPPORT 189
#define SSL_R_NO_PRIVATE_KEY_ASSIGNED 190
#define SSL_R_NO_RENEGOTIATION 191
#define SSL_R_NO_REQUIRED_DIGEST 192
#define SSL_R_NO_SHARED_CIPHER 193
#define SSL_R_NO_SHARED_SIGATURE_ALGORITHMS 194
#define SSL_R_NO_SRTP_PROFILES 195
#define SSL_R_NULL_SSL_CTX 196
#define SSL_R_NULL_SSL_METHOD_PASSED 197
#define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 198
#define SSL_R_PACKET_LENGTH_TOO_LONG 199
#define SSL_R_PARSE_TLSEXT 200
#define SSL_R_PATH_TOO_LONG 201
#define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 202
#define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 203
#define SSL_R_PROTOCOL_IS_SHUTDOWN 204
#define SSL_R_PSK_IDENTITY_NOT_FOUND 205
#define SSL_R_PSK_NO_CLIENT_CB 206
#define SSL_R_PSK_NO_SERVER_CB 207
#define SSL_R_READ_BIO_NOT_SET 208
#define SSL_R_READ_TIMEOUT_EXPIRED 209
#define SSL_R_RECORD_LENGTH_MISMATCH 210
#define SSL_R_RECORD_TOO_LARGE 211
#define SSL_R_RENEGOTIATE_EXT_TOO_LONG 212
#define SSL_R_RENEGOTIATION_ENCODING_ERR 213
#define SSL_R_RENEGOTIATION_MISMATCH 214
#define SSL_R_REQUIRED_CIPHER_MISSING 215
#define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 216
#define SSL_R_SERVERHELLO_TLSEXT 217
#define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 218
#define SSL_R_SESSION_MAY_NOT_BE_CREATED 219
#define SSL_R_SIGNATURE_ALGORITHMS_ERROR 220
#define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES 221
#define SSL_R_SRTP_PROTECTION_PROFILE_LIST_TOO_LONG 222
#define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE 223
#define SSL_R_SSL3_EXT_INVALID_SERVERNAME 224
#define SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE 225
#define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 226
#define SSL_R_SSL_HANDSHAKE_FAILURE 227
#define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 228
#define SSL_R_SSL_SESSION_ID_CONFLICT 229
#define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 230
#define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 231
#define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 232
#define SSL_R_TLS_ILLEGAL_EXPORTER_LABEL 233
#define SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST 234
#define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 235
#define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 236
#define SSL_R_TOO_MANY_EMPTY_FRAGMENTS 237
#define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 238
#define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239
#define SSL_R_UNEXPECTED_GROUP_CLOSE 240
#define SSL_R_UNEXPECTED_MESSAGE 241
#define SSL_R_UNEXPECTED_OPERATOR_IN_GROUP 242
#define SSL_R_UNEXPECTED_RECORD 243
#define SSL_R_UNINITIALIZED 244
#define SSL_R_UNKNOWN_ALERT_TYPE 245
#define SSL_R_UNKNOWN_CERTIFICATE_TYPE 246
#define SSL_R_UNKNOWN_CIPHER_RETURNED 247
#define SSL_R_UNKNOWN_CIPHER_TYPE 248
#define SSL_R_UNKNOWN_DIGEST 249
#define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 250
#define SSL_R_UNKNOWN_PROTOCOL 251
#define SSL_R_UNKNOWN_SSL_VERSION 252
#define SSL_R_UNKNOWN_STATE 253
#define SSL_R_UNPROCESSED_HANDSHAKE_DATA 254
#define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 255
#define SSL_R_UNSUPPORTED_CIPHER 256
#define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257
#define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 258
#define SSL_R_UNSUPPORTED_PROTOCOL 259
#define SSL_R_UNSUPPORTED_SSL_VERSION 260
#define SSL_R_USE_SRTP_NOT_NEGOTIATED 261
#define SSL_R_WRONG_CERTIFICATE_TYPE 262
#define SSL_R_WRONG_CIPHER_RETURNED 263
#define SSL_R_WRONG_CURVE 264
#define SSL_R_WRONG_MESSAGE_TYPE 265
#define SSL_R_WRONG_SIGNATURE_TYPE 266
#define SSL_R_WRONG_SSL_VERSION 267
#define SSL_R_WRONG_VERSION_NUMBER 268
#define SSL_R_X509_LIB 269
#define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 270
#define SSL_R_FRAGMENT_MISMATCH 271
#define SSL_R_BUFFER_TOO_SMALL 272
#define SSL_R_OLD_SESSION_VERSION_NOT_RETURNED 273
#define SSL_R_OUTPUT_ALIASES_INPUT 274
#define SSL_R_RESUMED_EMS_SESSION_WITHOUT_EMS_EXTENSION 275
#define SSL_R_EMS_STATE_INCONSISTENT 276
#define SSL_R_RESUMED_NON_EMS_SESSION_WITH_EMS_EXTENSION 277
#define SSL_R_TOO_MANY_WARNING_ALERTS 278
#define SSL_R_UNEXPECTED_EXTENSION 279
#define SSL_R_SIGNATURE_ALGORITHMS_EXTENSION_SENT_BY_SERVER 280
#define SSL_R_ERROR_ADDING_EXTENSION 281
#define SSL_R_ERROR_PARSING_EXTENSION 282
#define SSL_R_MISSING_EXTENSION 283
#define SSL_R_CUSTOM_EXTENSION_CONTENTS_TOO_LARGE 284
#define SSL_R_CUSTOM_EXTENSION_ERROR 285
#define SSL_R_SSLV3_ALERT_CLOSE_NOTIFY 1000
#define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010
#define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020
#define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021
#define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022
#define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030
#define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040
#define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041
#define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042
#define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043
#define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044
#define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045
#define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046
#define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047
#define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048
#define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049
#define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050
#define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051
#define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060
#define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070
#define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071
#define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080
#define SSL_R_TLSV1_ALERT_INAPPROPRIATE_FALLBACK 1086
#define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090
#define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100
#define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 1110
#define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 1111
#define SSL_R_TLSV1_UNRECOGNIZED_NAME 1112
#define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 1113
#define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 1114
#endif /* OPENSSL_HEADER_SSL_H */