blob: fc2f2b0ae44323f31e426ff4effb7a1f8eb9ba23 [file] [log] [blame]
/* ssl/ssl3.h */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
* ECC cipher suite support in OpenSSL originally developed by
* SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
*/
#ifndef HEADER_SSL3_H
#define HEADER_SSL3_H
#include <openssl/buf.h>
#include <openssl/evp.h>
#include <openssl/ssl.h>
#ifdef __cplusplus
extern "C" {
#endif
/* Signalling cipher suite value: from draft-ietf-tls-renegotiation-03.txt */
#define SSL3_CK_SCSV 0x030000FF
/* Fallback signalling cipher suite value: not IANA assigned.
* See https://tools.ietf.org/html/draft-bmoeller-tls-downgrade-scsv-01 */
#define SSL3_CK_FALLBACK_SCSV 0x03005600
#define SSL3_CK_RSA_NULL_MD5 0x03000001
#define SSL3_CK_RSA_NULL_SHA 0x03000002
#define SSL3_CK_RSA_RC4_40_MD5 0x03000003
#define SSL3_CK_RSA_RC4_128_MD5 0x03000004
#define SSL3_CK_RSA_RC4_128_SHA 0x03000005
#define SSL3_CK_RSA_RC2_40_MD5 0x03000006
#define SSL3_CK_RSA_IDEA_128_SHA 0x03000007
#define SSL3_CK_RSA_DES_40_CBC_SHA 0x03000008
#define SSL3_CK_RSA_DES_64_CBC_SHA 0x03000009
#define SSL3_CK_RSA_DES_192_CBC3_SHA 0x0300000A
#define SSL3_CK_DH_DSS_DES_40_CBC_SHA 0x0300000B
#define SSL3_CK_DH_DSS_DES_64_CBC_SHA 0x0300000C
#define SSL3_CK_DH_DSS_DES_192_CBC3_SHA 0x0300000D
#define SSL3_CK_DH_RSA_DES_40_CBC_SHA 0x0300000E
#define SSL3_CK_DH_RSA_DES_64_CBC_SHA 0x0300000F
#define SSL3_CK_DH_RSA_DES_192_CBC3_SHA 0x03000010
#define SSL3_CK_EDH_DSS_DES_40_CBC_SHA 0x03000011
#define SSL3_CK_EDH_DSS_DES_64_CBC_SHA 0x03000012
#define SSL3_CK_EDH_DSS_DES_192_CBC3_SHA 0x03000013
#define SSL3_CK_EDH_RSA_DES_40_CBC_SHA 0x03000014
#define SSL3_CK_EDH_RSA_DES_64_CBC_SHA 0x03000015
#define SSL3_CK_EDH_RSA_DES_192_CBC3_SHA 0x03000016
#define SSL3_CK_ADH_RC4_40_MD5 0x03000017
#define SSL3_CK_ADH_RC4_128_MD5 0x03000018
#define SSL3_CK_ADH_DES_40_CBC_SHA 0x03000019
#define SSL3_CK_ADH_DES_64_CBC_SHA 0x0300001A
#define SSL3_CK_ADH_DES_192_CBC_SHA 0x0300001B
#if 0
#define SSL3_CK_FZA_DMS_NULL_SHA 0x0300001C
#define SSL3_CK_FZA_DMS_FZA_SHA 0x0300001D
#if 0 /* Because it clashes with KRB5, is never used any more, and is safe
to remove according to David Hopwood <david.hopwood@zetnet.co.uk>
of the ietf-tls list */
#define SSL3_CK_FZA_DMS_RC4_SHA 0x0300001E
#endif
#endif
/* VRS Additional Kerberos5 entries
*/
#define SSL3_CK_KRB5_DES_64_CBC_SHA 0x0300001E
#define SSL3_CK_KRB5_DES_192_CBC3_SHA 0x0300001F
#define SSL3_CK_KRB5_RC4_128_SHA 0x03000020
#define SSL3_CK_KRB5_IDEA_128_CBC_SHA 0x03000021
#define SSL3_CK_KRB5_DES_64_CBC_MD5 0x03000022
#define SSL3_CK_KRB5_DES_192_CBC3_MD5 0x03000023
#define SSL3_CK_KRB5_RC4_128_MD5 0x03000024
#define SSL3_CK_KRB5_IDEA_128_CBC_MD5 0x03000025
#define SSL3_CK_KRB5_DES_40_CBC_SHA 0x03000026
#define SSL3_CK_KRB5_RC2_40_CBC_SHA 0x03000027
#define SSL3_CK_KRB5_RC4_40_SHA 0x03000028
#define SSL3_CK_KRB5_DES_40_CBC_MD5 0x03000029
#define SSL3_CK_KRB5_RC2_40_CBC_MD5 0x0300002A
#define SSL3_CK_KRB5_RC4_40_MD5 0x0300002B
#define SSL3_TXT_RSA_NULL_MD5 "NULL-MD5"
#define SSL3_TXT_RSA_NULL_SHA "NULL-SHA"
#define SSL3_TXT_RSA_RC4_40_MD5 "EXP-RC4-MD5"
#define SSL3_TXT_RSA_RC4_128_MD5 "RC4-MD5"
#define SSL3_TXT_RSA_RC4_128_SHA "RC4-SHA"
#define SSL3_TXT_RSA_RC2_40_MD5 "EXP-RC2-CBC-MD5"
#define SSL3_TXT_RSA_IDEA_128_SHA "IDEA-CBC-SHA"
#define SSL3_TXT_RSA_DES_40_CBC_SHA "EXP-DES-CBC-SHA"
#define SSL3_TXT_RSA_DES_64_CBC_SHA "DES-CBC-SHA"
#define SSL3_TXT_RSA_DES_192_CBC3_SHA "DES-CBC3-SHA"
#define SSL3_TXT_DH_DSS_DES_40_CBC_SHA "EXP-DH-DSS-DES-CBC-SHA"
#define SSL3_TXT_DH_DSS_DES_64_CBC_SHA "DH-DSS-DES-CBC-SHA"
#define SSL3_TXT_DH_DSS_DES_192_CBC3_SHA "DH-DSS-DES-CBC3-SHA"
#define SSL3_TXT_DH_RSA_DES_40_CBC_SHA "EXP-DH-RSA-DES-CBC-SHA"
#define SSL3_TXT_DH_RSA_DES_64_CBC_SHA "DH-RSA-DES-CBC-SHA"
#define SSL3_TXT_DH_RSA_DES_192_CBC3_SHA "DH-RSA-DES-CBC3-SHA"
#define SSL3_TXT_EDH_DSS_DES_40_CBC_SHA "EXP-EDH-DSS-DES-CBC-SHA"
#define SSL3_TXT_EDH_DSS_DES_64_CBC_SHA "EDH-DSS-DES-CBC-SHA"
#define SSL3_TXT_EDH_DSS_DES_192_CBC3_SHA "EDH-DSS-DES-CBC3-SHA"
#define SSL3_TXT_EDH_RSA_DES_40_CBC_SHA "EXP-EDH-RSA-DES-CBC-SHA"
#define SSL3_TXT_EDH_RSA_DES_64_CBC_SHA "EDH-RSA-DES-CBC-SHA"
#define SSL3_TXT_EDH_RSA_DES_192_CBC3_SHA "EDH-RSA-DES-CBC3-SHA"
#define SSL3_TXT_ADH_RC4_40_MD5 "EXP-ADH-RC4-MD5"
#define SSL3_TXT_ADH_RC4_128_MD5 "ADH-RC4-MD5"
#define SSL3_TXT_ADH_DES_40_CBC_SHA "EXP-ADH-DES-CBC-SHA"
#define SSL3_TXT_ADH_DES_64_CBC_SHA "ADH-DES-CBC-SHA"
#define SSL3_TXT_ADH_DES_192_CBC_SHA "ADH-DES-CBC3-SHA"
#if 0
#define SSL3_TXT_FZA_DMS_NULL_SHA "FZA-NULL-SHA"
#define SSL3_TXT_FZA_DMS_FZA_SHA "FZA-FZA-CBC-SHA"
#define SSL3_TXT_FZA_DMS_RC4_SHA "FZA-RC4-SHA"
#endif
#define SSL3_TXT_KRB5_DES_64_CBC_SHA "KRB5-DES-CBC-SHA"
#define SSL3_TXT_KRB5_DES_192_CBC3_SHA "KRB5-DES-CBC3-SHA"
#define SSL3_TXT_KRB5_RC4_128_SHA "KRB5-RC4-SHA"
#define SSL3_TXT_KRB5_IDEA_128_CBC_SHA "KRB5-IDEA-CBC-SHA"
#define SSL3_TXT_KRB5_DES_64_CBC_MD5 "KRB5-DES-CBC-MD5"
#define SSL3_TXT_KRB5_DES_192_CBC3_MD5 "KRB5-DES-CBC3-MD5"
#define SSL3_TXT_KRB5_RC4_128_MD5 "KRB5-RC4-MD5"
#define SSL3_TXT_KRB5_IDEA_128_CBC_MD5 "KRB5-IDEA-CBC-MD5"
#define SSL3_TXT_KRB5_DES_40_CBC_SHA "EXP-KRB5-DES-CBC-SHA"
#define SSL3_TXT_KRB5_RC2_40_CBC_SHA "EXP-KRB5-RC2-CBC-SHA"
#define SSL3_TXT_KRB5_RC4_40_SHA "EXP-KRB5-RC4-SHA"
#define SSL3_TXT_KRB5_DES_40_CBC_MD5 "EXP-KRB5-DES-CBC-MD5"
#define SSL3_TXT_KRB5_RC2_40_CBC_MD5 "EXP-KRB5-RC2-CBC-MD5"
#define SSL3_TXT_KRB5_RC4_40_MD5 "EXP-KRB5-RC4-MD5"
#define SSL3_SSL_SESSION_ID_LENGTH 32
#define SSL3_MAX_SSL_SESSION_ID_LENGTH 32
#define SSL3_MASTER_SECRET_SIZE 48
#define SSL3_RANDOM_SIZE 32
#define SSL3_SESSION_ID_SIZE 32
#define SSL3_RT_HEADER_LENGTH 5
#define SSL3_HM_HEADER_LENGTH 4
#ifndef SSL3_ALIGN_PAYLOAD
/* Some will argue that this increases memory footprint, but it's
* not actually true. Point is that malloc has to return at least
* 64-bit aligned pointers, meaning that allocating 5 bytes wastes
* 3 bytes in either case. Suggested pre-gaping simply moves these
* wasted bytes from the end of allocated region to its front,
* but makes data payload aligned, which improves performance:-) */
# define SSL3_ALIGN_PAYLOAD 8
#else
# if (SSL3_ALIGN_PAYLOAD&(SSL3_ALIGN_PAYLOAD-1))!=0
# error "insane SSL3_ALIGN_PAYLOAD"
# undef SSL3_ALIGN_PAYLOAD
# endif
#endif
/* This is the maximum MAC (digest) size used by the SSL library.
* Currently maximum of 20 is used by SHA1, but we reserve for
* future extension for 512-bit hashes.
*/
#define SSL3_RT_MAX_MD_SIZE 64
/* Maximum block size used in all ciphersuites. Currently 16 for AES.
*/
#define SSL_RT_MAX_CIPHER_BLOCK_SIZE 16
#define SSL3_RT_MAX_EXTRA (16384)
/* Maximum plaintext length: defined by SSL/TLS standards */
#define SSL3_RT_MAX_PLAIN_LENGTH 16384
/* Maximum compression overhead: defined by SSL/TLS standards */
#define SSL3_RT_MAX_COMPRESSED_OVERHEAD 1024
/* The standards give a maximum encryption overhead of 1024 bytes.
* In practice the value is lower than this. The overhead is the maximum
* number of padding bytes (256) plus the mac size.
*/
#define SSL3_RT_MAX_ENCRYPTED_OVERHEAD (256 + SSL3_RT_MAX_MD_SIZE)
/* OpenSSL currently only uses a padding length of at most one block so
* the send overhead is smaller.
*/
#define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \
(SSL_RT_MAX_CIPHER_BLOCK_SIZE + SSL3_RT_MAX_MD_SIZE)
/* If compression isn't used don't include the compression overhead */
#define SSL3_RT_MAX_COMPRESSED_LENGTH \
(SSL3_RT_MAX_PLAIN_LENGTH+SSL3_RT_MAX_COMPRESSED_OVERHEAD)
#define SSL3_RT_MAX_ENCRYPTED_LENGTH \
(SSL3_RT_MAX_ENCRYPTED_OVERHEAD+SSL3_RT_MAX_COMPRESSED_LENGTH)
#define SSL3_RT_MAX_PACKET_SIZE \
(SSL3_RT_MAX_ENCRYPTED_LENGTH+SSL3_RT_HEADER_LENGTH)
#define SSL3_MD_CLIENT_FINISHED_CONST "\x43\x4C\x4E\x54"
#define SSL3_MD_SERVER_FINISHED_CONST "\x53\x52\x56\x52"
#define SSL3_VERSION 0x0300
#define SSL3_VERSION_MAJOR 0x03
#define SSL3_VERSION_MINOR 0x00
#define SSL3_RT_CHANGE_CIPHER_SPEC 20
#define SSL3_RT_ALERT 21
#define SSL3_RT_HANDSHAKE 22
#define SSL3_RT_APPLICATION_DATA 23
/* Pseudo content types to indicate additional parameters */
#define TLS1_RT_CRYPTO 0x1000
#define TLS1_RT_CRYPTO_PREMASTER (TLS1_RT_CRYPTO | 0x1)
#define TLS1_RT_CRYPTO_CLIENT_RANDOM (TLS1_RT_CRYPTO | 0x2)
#define TLS1_RT_CRYPTO_SERVER_RANDOM (TLS1_RT_CRYPTO | 0x3)
#define TLS1_RT_CRYPTO_MASTER (TLS1_RT_CRYPTO | 0x4)
#define TLS1_RT_CRYPTO_READ 0x0000
#define TLS1_RT_CRYPTO_WRITE 0x0100
#define TLS1_RT_CRYPTO_MAC (TLS1_RT_CRYPTO | 0x5)
#define TLS1_RT_CRYPTO_KEY (TLS1_RT_CRYPTO | 0x6)
#define TLS1_RT_CRYPTO_IV (TLS1_RT_CRYPTO | 0x7)
#define TLS1_RT_CRYPTO_FIXED_IV (TLS1_RT_CRYPTO | 0x8)
/* Pseudo content type for SSL/TLS header info */
#define SSL3_RT_HEADER 0x100
#define SSL3_AL_WARNING 1
#define SSL3_AL_FATAL 2
#define SSL3_AD_CLOSE_NOTIFY 0
#define SSL3_AD_UNEXPECTED_MESSAGE 10 /* fatal */
#define SSL3_AD_BAD_RECORD_MAC 20 /* fatal */
#define SSL3_AD_DECOMPRESSION_FAILURE 30 /* fatal */
#define SSL3_AD_HANDSHAKE_FAILURE 40 /* fatal */
#define SSL3_AD_NO_CERTIFICATE 41
#define SSL3_AD_BAD_CERTIFICATE 42
#define SSL3_AD_UNSUPPORTED_CERTIFICATE 43
#define SSL3_AD_CERTIFICATE_REVOKED 44
#define SSL3_AD_CERTIFICATE_EXPIRED 45
#define SSL3_AD_CERTIFICATE_UNKNOWN 46
#define SSL3_AD_ILLEGAL_PARAMETER 47 /* fatal */
#define SSL3_AD_INAPPROPRIATE_FALLBACK 86 /* fatal */
#ifndef OPENSSL_NO_SSL_INTERN
typedef struct ssl3_record_st
{
/*r */ int type; /* type of record */
/*rw*/ unsigned int length; /* How many bytes available */
/*r */ unsigned int off; /* read/write offset into 'buf' */
/*rw*/ unsigned char *data; /* pointer to the record data */
/*rw*/ unsigned char *input; /* where the decode bytes are */
/*r */ unsigned long epoch; /* epoch number, needed by DTLS1 */
/*r */ unsigned char seq_num[8]; /* sequence number, needed by DTLS1 */
} SSL3_RECORD;
typedef struct ssl3_buffer_st
{
unsigned char *buf; /* at least SSL3_RT_MAX_PACKET_SIZE bytes,
* see ssl3_setup_buffers() */
size_t len; /* buffer size */
int offset; /* where to 'copy from' */
int left; /* how many bytes left */
} SSL3_BUFFER;
#endif
#define SSL3_CT_RSA_SIGN 1
#define SSL3_CT_DSS_SIGN 2
#define SSL3_CT_RSA_FIXED_DH 3
#define SSL3_CT_DSS_FIXED_DH 4
#define SSL3_CT_RSA_EPHEMERAL_DH 5
#define SSL3_CT_DSS_EPHEMERAL_DH 6
#define SSL3_CT_FORTEZZA_DMS 20
#define SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS 0x0001
#define SSL3_FLAGS_DELAY_CLIENT_FINISHED 0x0002
#define SSL3_FLAGS_POP_BUFFER 0x0004
#define TLS1_FLAGS_TLS_PADDING_BUG 0x0008
#define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010
#define TLS1_FLAGS_KEEP_HANDSHAKE 0x0020
#define SSL3_FLAGS_CCS_OK 0x0080
/* SSL3_FLAGS_SGC_RESTART_DONE is set when we
* restart a handshake because of MS SGC and so prevents us
* from restarting the handshake in a loop. It's reset on a
* renegotiation, so effectively limits the client to one restart
* per negotiation. This limits the possibility of a DDoS
* attack where the client handshakes in a loop using SGC to
* restart. Servers which permit renegotiation can still be
* effected, but we can't prevent that.
*/
#define SSL3_FLAGS_SGC_RESTART_DONE 0x0040
#ifndef OPENSSL_NO_SSL_INTERN
typedef struct ssl3_state_st
{
long flags;
int delay_buf_pop_ret;
unsigned char read_sequence[8];
int read_mac_secret_size;
unsigned char read_mac_secret[EVP_MAX_MD_SIZE];
unsigned char write_sequence[8];
int write_mac_secret_size;
unsigned char write_mac_secret[EVP_MAX_MD_SIZE];
unsigned char server_random[SSL3_RANDOM_SIZE];
unsigned char client_random[SSL3_RANDOM_SIZE];
/* flags for countermeasure against known-IV weakness */
int need_record_splitting;
int record_split_done;
/* The value of 'extra' when the buffers were initialized */
int init_extra;
SSL3_BUFFER rbuf; /* read IO goes into here */
SSL3_BUFFER wbuf; /* write IO goes into here */
SSL3_RECORD rrec; /* each decoded record goes in here */
SSL3_RECORD wrec; /* goes out from here */
/* storage for Alert/Handshake protocol data received but not
* yet processed by ssl3_read_bytes: */
unsigned char alert_fragment[2];
unsigned int alert_fragment_len;
unsigned char handshake_fragment[4];
unsigned int handshake_fragment_len;
/* partial write - check the numbers match */
unsigned int wnum; /* number of bytes sent so far */
int wpend_tot; /* number bytes written */
int wpend_type;
int wpend_ret; /* number of bytes submitted */
const unsigned char *wpend_buf;
/* used during startup, digest all incoming/outgoing packets */
BIO *handshake_buffer;
/* When set of handshake digests is determined, buffer is hashed
* and freed and MD_CTX-es for all required digests are stored in
* this array */
EVP_MD_CTX **handshake_dgst;
/* this is set whenerver we see a change_cipher_spec message
* come in when we are not looking for one */
int change_cipher_spec;
int warn_alert;
int fatal_alert;
/* we allow one fatal and one warning alert to be outstanding,
* send close alert via the warning alert */
int alert_dispatch;
unsigned char send_alert[2];
/* This flag is set when we should renegotiate ASAP, basically when
* there is no more data in the read or write buffers */
int renegotiate;
int total_renegotiations;
int num_renegotiations;
int in_read_app_data;
/* State pertaining to the pending handshake.
*
* TODO(davidben): State is current spread all over the place. Move
* pending handshake state here so it can be managed separately from
* established connection state in case of renegotiations.
*/
struct {
/* actually only needs to be 16+20 */
unsigned char cert_verify_md[EVP_MAX_MD_SIZE*2];
/* actually only need to be 16+20 for SSLv3 and 12 for TLS */
unsigned char finish_md[EVP_MAX_MD_SIZE*2];
int finish_md_len;
unsigned char peer_finish_md[EVP_MAX_MD_SIZE*2];
int peer_finish_md_len;
unsigned long message_size;
int message_type;
/* used to hold the new cipher we are going to use */
const SSL_CIPHER *new_cipher;
#ifndef OPENSSL_NO_DH
DH *dh;
#endif
#ifndef OPENSSL_NO_ECDH
EC_KEY *ecdh; /* holds short lived ECDH key */
#endif
/* used when SSL_ST_FLUSH_DATA is entered */
int next_state;
int reuse_message;
/* Client-only: cert_req determines if a client certificate is
* to be sent. This is 0 if no client Certificate message is to
* be sent, 1 if there is a client certificate, and 2 to send an
* empty client Certificate message. */
int cert_req;
/* Client-only: ca_names contains the list of CAs received in a
* CertificateRequest message. */
STACK_OF(X509_NAME) *ca_names;
/* Client-only: certificate_types contains the set of
* certificate types received in a CertificateRequest
* message. */
unsigned char *certificate_types;
size_t num_certificate_types;
int use_rsa_tmp;
int key_block_length;
unsigned char *key_block;
const EVP_CIPHER *new_sym_enc;
const EVP_AEAD *new_aead;
const EVP_MD *new_hash;
int new_mac_pkey_type;
int new_mac_secret_size;
/* Server-only: cert_request is true if a client certificate was
* requested. */
int cert_request;
} tmp;
/* Connection binding to prevent renegotiation attacks */
unsigned char previous_client_finished[EVP_MAX_MD_SIZE];
unsigned char previous_client_finished_len;
unsigned char previous_server_finished[EVP_MAX_MD_SIZE];
unsigned char previous_server_finished_len;
int send_connection_binding; /* TODOEKR */
#ifndef OPENSSL_NO_NEXTPROTONEG
/* Set if we saw the Next Protocol Negotiation extension from our peer. */
int next_proto_neg_seen;
#endif
/* ALPN information
* (we are in the process of transitioning from NPN to ALPN.) */
/* In a server these point to the selected ALPN protocol after the
* ClientHello has been processed. In a client these contain the
* protocol that the server selected once the ServerHello has been
* processed. */
uint8_t *alpn_selected;
size_t alpn_selected_len;
/* In a client, this means that the server supported Channel ID and that
* a Channel ID was sent. In a server it means that we echoed support
* for Channel IDs and that tlsext_channel_id will be valid after the
* handshake. */
char tlsext_channel_id_valid;
/* tlsext_channel_id_new means that the updated Channel ID extension
* was negotiated. This is a temporary hack in the code to support both
* forms of Channel ID extension while we transition to the new format,
* which fixed a security issue. */
char tlsext_channel_id_new;
/* For a server:
* If |tlsext_channel_id_valid| is true, then this contains the
* verified Channel ID from the client: a P256 point, (x,y), where
* each are big-endian values. */
unsigned char tlsext_channel_id[64];
} SSL3_STATE;
#endif
/* SSLv3 */
/*client */
/* extra state */
#define SSL3_ST_CW_FLUSH (0x100|SSL_ST_CONNECT)
#define SSL3_ST_CUTTHROUGH_COMPLETE (0x101|SSL_ST_CONNECT)
/* write to server */
#define SSL3_ST_CW_CLNT_HELLO_A (0x110|SSL_ST_CONNECT)
#define SSL3_ST_CW_CLNT_HELLO_B (0x111|SSL_ST_CONNECT)
/* read from server */
#define SSL3_ST_CR_SRVR_HELLO_A (0x120|SSL_ST_CONNECT)
#define SSL3_ST_CR_SRVR_HELLO_B (0x121|SSL_ST_CONNECT)
#define DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A (0x126|SSL_ST_CONNECT)
#define DTLS1_ST_CR_HELLO_VERIFY_REQUEST_B (0x127|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_A (0x130|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_B (0x131|SSL_ST_CONNECT)
#define SSL3_ST_CR_KEY_EXCH_A (0x140|SSL_ST_CONNECT)
#define SSL3_ST_CR_KEY_EXCH_B (0x141|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_REQ_A (0x150|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_REQ_B (0x151|SSL_ST_CONNECT)
#define SSL3_ST_CR_SRVR_DONE_A (0x160|SSL_ST_CONNECT)
#define SSL3_ST_CR_SRVR_DONE_B (0x161|SSL_ST_CONNECT)
/* write to server */
#define SSL3_ST_CW_CERT_A (0x170|SSL_ST_CONNECT)
#define SSL3_ST_CW_CERT_B (0x171|SSL_ST_CONNECT)
#define SSL3_ST_CW_CERT_C (0x172|SSL_ST_CONNECT)
#define SSL3_ST_CW_CERT_D (0x173|SSL_ST_CONNECT)
#define SSL3_ST_CW_KEY_EXCH_A (0x180|SSL_ST_CONNECT)
#define SSL3_ST_CW_KEY_EXCH_B (0x181|SSL_ST_CONNECT)
#define SSL3_ST_CW_CERT_VRFY_A (0x190|SSL_ST_CONNECT)
#define SSL3_ST_CW_CERT_VRFY_B (0x191|SSL_ST_CONNECT)
#define SSL3_ST_CW_CHANGE_A (0x1A0|SSL_ST_CONNECT)
#define SSL3_ST_CW_CHANGE_B (0x1A1|SSL_ST_CONNECT)
#ifndef OPENSSL_NO_NEXTPROTONEG
#define SSL3_ST_CW_NEXT_PROTO_A (0x200|SSL_ST_CONNECT)
#define SSL3_ST_CW_NEXT_PROTO_B (0x201|SSL_ST_CONNECT)
#endif
#define SSL3_ST_CW_CHANNEL_ID_A (0x220|SSL_ST_CONNECT)
#define SSL3_ST_CW_CHANNEL_ID_B (0x221|SSL_ST_CONNECT)
#define SSL3_ST_CW_FINISHED_A (0x1B0|SSL_ST_CONNECT)
#define SSL3_ST_CW_FINISHED_B (0x1B1|SSL_ST_CONNECT)
/* read from server */
#define SSL3_ST_CR_CHANGE_A (0x1C0|SSL_ST_CONNECT)
#define SSL3_ST_CR_CHANGE_B (0x1C1|SSL_ST_CONNECT)
#define SSL3_ST_CR_FINISHED_A (0x1D0|SSL_ST_CONNECT)
#define SSL3_ST_CR_FINISHED_B (0x1D1|SSL_ST_CONNECT)
#define SSL3_ST_CR_SESSION_TICKET_A (0x1E0|SSL_ST_CONNECT)
#define SSL3_ST_CR_SESSION_TICKET_B (0x1E1|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_STATUS_A (0x1F0|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_STATUS_B (0x1F1|SSL_ST_CONNECT)
/* server */
/* extra state */
#define SSL3_ST_SW_FLUSH (0x100|SSL_ST_ACCEPT)
/* read from client */
/* Do not change the number values, they do matter */
#define SSL3_ST_SR_CLNT_HELLO_A (0x110|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CLNT_HELLO_B (0x111|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CLNT_HELLO_C (0x112|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CLNT_HELLO_D (0x115|SSL_ST_ACCEPT)
/* write to client */
#define DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A (0x113|SSL_ST_ACCEPT)
#define DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B (0x114|SSL_ST_ACCEPT)
#define SSL3_ST_SW_HELLO_REQ_A (0x120|SSL_ST_ACCEPT)
#define SSL3_ST_SW_HELLO_REQ_B (0x121|SSL_ST_ACCEPT)
#define SSL3_ST_SW_HELLO_REQ_C (0x122|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SRVR_HELLO_A (0x130|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SRVR_HELLO_B (0x131|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CERT_A (0x140|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CERT_B (0x141|SSL_ST_ACCEPT)
#define SSL3_ST_SW_KEY_EXCH_A (0x150|SSL_ST_ACCEPT)
#define SSL3_ST_SW_KEY_EXCH_B (0x151|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CERT_REQ_A (0x160|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CERT_REQ_B (0x161|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SRVR_DONE_A (0x170|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SRVR_DONE_B (0x171|SSL_ST_ACCEPT)
/* read from client */
#define SSL3_ST_SR_CERT_A (0x180|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CERT_B (0x181|SSL_ST_ACCEPT)
#define SSL3_ST_SR_KEY_EXCH_A (0x190|SSL_ST_ACCEPT)
#define SSL3_ST_SR_KEY_EXCH_B (0x191|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CERT_VRFY_A (0x1A0|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CERT_VRFY_B (0x1A1|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CHANGE_A (0x1B0|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CHANGE_B (0x1B1|SSL_ST_ACCEPT)
#ifndef OPENSSL_NO_NEXTPROTONEG
#define SSL3_ST_SR_NEXT_PROTO_A (0x210|SSL_ST_ACCEPT)
#define SSL3_ST_SR_NEXT_PROTO_B (0x211|SSL_ST_ACCEPT)
#endif
#define SSL3_ST_SR_POST_CLIENT_CERT (0x1BF|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CHANNEL_ID_A (0x230|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CHANNEL_ID_B (0x231|SSL_ST_ACCEPT)
#define SSL3_ST_SR_FINISHED_A (0x1C0|SSL_ST_ACCEPT)
#define SSL3_ST_SR_FINISHED_B (0x1C1|SSL_ST_ACCEPT)
/* write to client */
#define SSL3_ST_SW_CHANGE_A (0x1D0|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CHANGE_B (0x1D1|SSL_ST_ACCEPT)
#define SSL3_ST_SW_FINISHED_A (0x1E0|SSL_ST_ACCEPT)
#define SSL3_ST_SW_FINISHED_B (0x1E1|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SESSION_TICKET_A (0x1F0|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SESSION_TICKET_B (0x1F1|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CERT_STATUS_A (0x200|SSL_ST_ACCEPT)
#define SSL3_ST_SW_CERT_STATUS_B (0x201|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SUPPLEMENTAL_DATA_A (0x220|SSL_ST_ACCEPT)
#define SSL3_ST_SW_SUPPLEMENTAL_DATA_B (0x221|SSL_ST_ACCEPT)
#define SSL3_MT_HELLO_REQUEST 0
#define SSL3_MT_CLIENT_HELLO 1
#define SSL3_MT_SERVER_HELLO 2
#define SSL3_MT_NEWSESSION_TICKET 4
#define SSL3_MT_CERTIFICATE 11
#define SSL3_MT_SERVER_KEY_EXCHANGE 12
#define SSL3_MT_CERTIFICATE_REQUEST 13
#define SSL3_MT_SERVER_DONE 14
#define SSL3_MT_CERTIFICATE_VERIFY 15
#define SSL3_MT_CLIENT_KEY_EXCHANGE 16
#define SSL3_MT_FINISHED 20
#define SSL3_MT_CERTIFICATE_STATUS 22
#define SSL3_MT_SUPPLEMENTAL_DATA 23
#ifndef OPENSSL_NO_NEXTPROTONEG
#define SSL3_MT_NEXT_PROTO 67
#endif
#define SSL3_MT_ENCRYPTED_EXTENSIONS 203
#define DTLS1_MT_HELLO_VERIFY_REQUEST 3
#define SSL3_MT_CCS 1
/* These are used when changing over to a new cipher */
#define SSL3_CC_READ 0x01
#define SSL3_CC_WRITE 0x02
#define SSL3_CC_CLIENT 0x10
#define SSL3_CC_SERVER 0x20
#define SSL3_CHANGE_CIPHER_CLIENT_WRITE (SSL3_CC_CLIENT|SSL3_CC_WRITE)
#define SSL3_CHANGE_CIPHER_SERVER_READ (SSL3_CC_SERVER|SSL3_CC_READ)
#define SSL3_CHANGE_CIPHER_CLIENT_READ (SSL3_CC_CLIENT|SSL3_CC_READ)
#define SSL3_CHANGE_CIPHER_SERVER_WRITE (SSL3_CC_SERVER|SSL3_CC_WRITE)
#ifdef __cplusplus
}
#endif
#endif