| // Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // https://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #ifndef OPENSSL_HEADER_PEM_H |
| #define OPENSSL_HEADER_PEM_H |
| |
| #include <openssl/base64.h> |
| #include <openssl/bio.h> |
| #include <openssl/cipher.h> |
| #include <openssl/digest.h> |
| #include <openssl/evp.h> |
| #include <openssl/pkcs7.h> |
| #include <openssl/stack.h> |
| #include <openssl/x509.h> |
| |
| // For compatibility with open-iscsi, which assumes that it can get |
| // |OPENSSL_malloc| from pem.h or err.h |
| #include <openssl/crypto.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| #define PEM_BUFSIZE 1024 |
| |
| #define PEM_STRING_X509_OLD "X509 CERTIFICATE" |
| #define PEM_STRING_X509 "CERTIFICATE" |
| #define PEM_STRING_X509_PAIR "CERTIFICATE PAIR" |
| #define PEM_STRING_X509_TRUSTED "TRUSTED CERTIFICATE" |
| #define PEM_STRING_X509_REQ_OLD "NEW CERTIFICATE REQUEST" |
| #define PEM_STRING_X509_REQ "CERTIFICATE REQUEST" |
| #define PEM_STRING_X509_CRL "X509 CRL" |
| #define PEM_STRING_EVP_PKEY "ANY PRIVATE KEY" |
| #define PEM_STRING_PUBLIC "PUBLIC KEY" |
| #define PEM_STRING_RSA "RSA PRIVATE KEY" |
| #define PEM_STRING_RSA_PUBLIC "RSA PUBLIC KEY" |
| #define PEM_STRING_DSA "DSA PRIVATE KEY" |
| #define PEM_STRING_DSA_PUBLIC "DSA PUBLIC KEY" |
| #define PEM_STRING_EC "EC PRIVATE KEY" |
| #define PEM_STRING_PKCS7 "PKCS7" |
| #define PEM_STRING_PKCS7_SIGNED "PKCS #7 SIGNED DATA" |
| #define PEM_STRING_PKCS8 "ENCRYPTED PRIVATE KEY" |
| #define PEM_STRING_PKCS8INF "PRIVATE KEY" |
| #define PEM_STRING_DHPARAMS "DH PARAMETERS" |
| #define PEM_STRING_SSL_SESSION "SSL SESSION PARAMETERS" |
| #define PEM_STRING_DSAPARAMS "DSA PARAMETERS" |
| #define PEM_STRING_ECDSA_PUBLIC "ECDSA PUBLIC KEY" |
| #define PEM_STRING_ECPRIVATEKEY "EC PRIVATE KEY" |
| #define PEM_STRING_CMS "CMS" |
| |
| // enc_type is one off |
| #define PEM_TYPE_ENCRYPTED 10 |
| #define PEM_TYPE_MIC_ONLY 20 |
| #define PEM_TYPE_MIC_CLEAR 30 |
| #define PEM_TYPE_CLEAR 40 |
| |
| // These macros make the PEM_read/PEM_write functions easier to maintain and |
| // write. Now they are all implemented with either: |
| // IMPLEMENT_PEM_rw(...) or IMPLEMENT_PEM_rw_cb(...) |
| |
| |
| #define IMPLEMENT_PEM_read_fp(name, type, str, asn1) \ |
| static void *pem_read_##name##_d2i(void **x, const unsigned char **inp, \ |
| long len) { \ |
| return d2i_##asn1((type **)x, inp, len); \ |
| } \ |
| OPENSSL_EXPORT type *PEM_read_##name(FILE *fp, type **x, \ |
| pem_password_cb *cb, void *u) { \ |
| return (type *)PEM_ASN1_read(pem_read_##name##_d2i, str, fp, (void **)x, \ |
| cb, u); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_fp(name, type, str, asn1) \ |
| static int pem_write_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_##name(FILE *fp, type *x) { \ |
| return PEM_ASN1_write(pem_write_##name##_i2d, str, fp, x, NULL, NULL, 0, \ |
| NULL, NULL); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_fp_const(name, type, str, asn1) \ |
| static int pem_write_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((const type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_##name(FILE *fp, const type *x) { \ |
| return PEM_ASN1_write(pem_write_##name##_i2d, str, fp, (void *)x, NULL, \ |
| NULL, 0, NULL, NULL); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_cb_fp(name, type, str, asn1) \ |
| static int pem_write_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_##name( \ |
| FILE *fp, type *x, const EVP_CIPHER *enc, const unsigned char *pass, \ |
| int pass_len, pem_password_cb *cb, void *u) { \ |
| return PEM_ASN1_write(pem_write_##name##_i2d, str, fp, x, enc, pass, \ |
| pass_len, cb, u); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_cb_fp_const(name, type, str, asn1) \ |
| static int pem_write_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((const type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_##name( \ |
| FILE *fp, type *x, const EVP_CIPHER *enc, const unsigned char *pass, \ |
| int pass_len, pem_password_cb *cb, void *u) { \ |
| return PEM_ASN1_write(pem_write_##name##_i2d, str, fp, x, enc, pass, \ |
| pass_len, cb, u); \ |
| } |
| |
| |
| #define IMPLEMENT_PEM_read_bio(name, type, str, asn1) \ |
| static void *pem_read_bio_##name##_d2i(void **x, const unsigned char **inp, \ |
| long len) { \ |
| return d2i_##asn1((type **)x, inp, len); \ |
| } \ |
| OPENSSL_EXPORT type *PEM_read_bio_##name(BIO *bp, type **x, \ |
| pem_password_cb *cb, void *u) { \ |
| return (type *)PEM_ASN1_read_bio(pem_read_bio_##name##_d2i, str, bp, \ |
| (void **)x, cb, u); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_bio(name, type, str, asn1) \ |
| static int pem_write_bio_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_bio_##name(BIO *bp, type *x) { \ |
| return PEM_ASN1_write_bio(pem_write_bio_##name##_i2d, str, bp, x, NULL, \ |
| NULL, 0, NULL, NULL); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_bio_const(name, type, str, asn1) \ |
| static int pem_write_bio_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((const type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_bio_##name(BIO *bp, const type *x) { \ |
| return PEM_ASN1_write_bio(pem_write_bio_##name##_i2d, str, bp, (void *)x, \ |
| NULL, NULL, 0, NULL, NULL); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_cb_bio(name, type, str, asn1) \ |
| static int pem_write_bio_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_bio_##name( \ |
| BIO *bp, type *x, const EVP_CIPHER *enc, const unsigned char *pass, \ |
| int pass_len, pem_password_cb *cb, void *u) { \ |
| return PEM_ASN1_write_bio(pem_write_bio_##name##_i2d, str, bp, x, enc, \ |
| pass, pass_len, cb, u); \ |
| } |
| |
| #define IMPLEMENT_PEM_write_cb_bio_const(name, type, str, asn1) \ |
| static int pem_write_bio_##name##_i2d(const void *x, unsigned char **outp) { \ |
| return i2d_##asn1((const type *)x, outp); \ |
| } \ |
| OPENSSL_EXPORT int PEM_write_bio_##name( \ |
| BIO *bp, type *x, const EVP_CIPHER *enc, const unsigned char *pass, \ |
| int pass_len, pem_password_cb *cb, void *u) { \ |
| return PEM_ASN1_write_bio(pem_write_bio_##name##_i2d, str, bp, (void *)x, \ |
| enc, pass, pass_len, cb, u); \ |
| } |
| |
| #define IMPLEMENT_PEM_write(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_bio(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_fp(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_write_const(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_bio_const(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_fp_const(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_write_cb(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_cb_bio(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_cb_fp(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_write_cb_const(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_cb_bio_const(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_cb_fp_const(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_read(name, type, str, asn1) \ |
| IMPLEMENT_PEM_read_bio(name, type, str, asn1) \ |
| IMPLEMENT_PEM_read_fp(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_rw(name, type, str, asn1) \ |
| IMPLEMENT_PEM_read(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_rw_const(name, type, str, asn1) \ |
| IMPLEMENT_PEM_read(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_const(name, type, str, asn1) |
| |
| #define IMPLEMENT_PEM_rw_cb(name, type, str, asn1) \ |
| IMPLEMENT_PEM_read(name, type, str, asn1) \ |
| IMPLEMENT_PEM_write_cb(name, type, str, asn1) |
| |
| // These are the same except they are for the declarations |
| |
| #define DECLARE_PEM_read_fp(name, type) \ |
| OPENSSL_EXPORT type *PEM_read_##name(FILE *fp, type **x, \ |
| pem_password_cb *cb, void *u); |
| |
| #define DECLARE_PEM_write_fp(name, type) \ |
| OPENSSL_EXPORT int PEM_write_##name(FILE *fp, type *x); |
| |
| #define DECLARE_PEM_write_fp_const(name, type) \ |
| OPENSSL_EXPORT int PEM_write_##name(FILE *fp, const type *x); |
| |
| #define DECLARE_PEM_write_cb_fp(name, type) \ |
| OPENSSL_EXPORT int PEM_write_##name( \ |
| FILE *fp, type *x, const EVP_CIPHER *enc, const unsigned char *pass, \ |
| int pass_len, pem_password_cb *cb, void *u); |
| |
| #define DECLARE_PEM_read_bio(name, type) \ |
| OPENSSL_EXPORT type *PEM_read_bio_##name(BIO *bp, type **x, \ |
| pem_password_cb *cb, void *u); |
| |
| #define DECLARE_PEM_write_bio(name, type) \ |
| OPENSSL_EXPORT int PEM_write_bio_##name(BIO *bp, type *x); |
| |
| #define DECLARE_PEM_write_bio_const(name, type) \ |
| OPENSSL_EXPORT int PEM_write_bio_##name(BIO *bp, const type *x); |
| |
| #define DECLARE_PEM_write_cb_bio(name, type) \ |
| OPENSSL_EXPORT int PEM_write_bio_##name( \ |
| BIO *bp, type *x, const EVP_CIPHER *enc, const unsigned char *pass, \ |
| int pass_len, pem_password_cb *cb, void *u); |
| |
| |
| #define DECLARE_PEM_write(name, type) \ |
| DECLARE_PEM_write_bio(name, type) \ |
| DECLARE_PEM_write_fp(name, type) |
| |
| #define DECLARE_PEM_write_const(name, type) \ |
| DECLARE_PEM_write_bio_const(name, type) \ |
| DECLARE_PEM_write_fp_const(name, type) |
| |
| #define DECLARE_PEM_write_cb(name, type) \ |
| DECLARE_PEM_write_cb_bio(name, type) \ |
| DECLARE_PEM_write_cb_fp(name, type) |
| |
| #define DECLARE_PEM_read(name, type) \ |
| DECLARE_PEM_read_bio(name, type) \ |
| DECLARE_PEM_read_fp(name, type) |
| |
| #define DECLARE_PEM_rw(name, type) \ |
| DECLARE_PEM_read(name, type) \ |
| DECLARE_PEM_write(name, type) |
| |
| #define DECLARE_PEM_rw_const(name, type) \ |
| DECLARE_PEM_read(name, type) \ |
| DECLARE_PEM_write_const(name, type) |
| |
| #define DECLARE_PEM_rw_cb(name, type) \ |
| DECLARE_PEM_read(name, type) \ |
| DECLARE_PEM_write_cb(name, type) |
| |
| // "userdata": new with OpenSSL 0.9.4 |
| typedef int pem_password_cb(char *buf, int size, int rwflag, void *userdata); |
| |
| // PEM_read_bio reads from |bp|, until the next PEM block. If one is found, it |
| // returns one and sets |*name|, |*header|, and |*data| to newly-allocated |
| // buffers containing the PEM type, the header block, and the decoded data, |
| // respectively. |*name| and |*header| are NUL-terminated C strings, while |
| // |*data| has |*len| bytes. The caller must release each of |*name|, |*header|, |
| // and |*data| with |OPENSSL_free| when done. If no PEM block is found, this |
| // function returns zero and pushes |PEM_R_NO_START_LINE| to the error queue. If |
| // one is found, but there is an error decoding it, it returns zero and pushes |
| // some other error to the error queue. |
| OPENSSL_EXPORT int PEM_read_bio(BIO *bp, char **name, char **header, |
| unsigned char **data, long *len); |
| |
| // PEM_write_bio writes a PEM block to |bp|, containing |len| bytes from |data| |
| // as data. |name| and |hdr| are NUL-terminated C strings containing the PEM |
| // type and header block, respectively. This function returns zero on error and |
| // the number of bytes written on success. |
| OPENSSL_EXPORT int PEM_write_bio(BIO *bp, const char *name, const char *hdr, |
| const unsigned char *data, long len); |
| |
| OPENSSL_EXPORT int PEM_bytes_read_bio(unsigned char **pdata, long *plen, |
| char **pnm, const char *name, BIO *bp, |
| pem_password_cb *cb, void *u); |
| OPENSSL_EXPORT void *PEM_ASN1_read_bio(d2i_of_void *d2i, const char *name, |
| BIO *bp, void **x, pem_password_cb *cb, |
| void *u); |
| OPENSSL_EXPORT int PEM_ASN1_write_bio(i2d_of_void *i2d, const char *name, |
| BIO *bp, void *x, const EVP_CIPHER *enc, |
| const unsigned char *pass, int pass_len, |
| pem_password_cb *cb, void *u); |
| |
| // PEM_X509_INFO_read_bio reads PEM blocks from |bp| and decodes any |
| // certificates, CRLs, and private keys found. It returns a |
| // |STACK_OF(X509_INFO)| structure containing the results, or NULL on error. |
| // |
| // If |sk| is NULL, the result on success will be a newly-allocated |
| // |STACK_OF(X509_INFO)| structure which should be released with |
| // |sk_X509_INFO_pop_free| and |X509_INFO_free| when done. |
| // |
| // If |sk| is non-NULL, it appends the results to |sk| instead and returns |sk| |
| // on success. In this case, the caller retains ownership of |sk| in both |
| // success and failure. |
| // |
| // This function will decrypt any encrypted certificates in |bp|, using |cb|, |
| // but it will not decrypt encrypted private keys. Encrypted private keys are |
| // instead represented as placeholder |X509_INFO| objects with an empty |x_pkey| |
| // field. This allows this function to be used with inputs with unencrypted |
| // certificates, but encrypted passwords, without knowing the password. However, |
| // it also means that this function cannot be used to decrypt the private key |
| // when the password is known. |
| // |
| // WARNING: If the input contains "TRUSTED CERTIFICATE" PEM blocks, this |
| // function parses auxiliary properties as in |d2i_X509_AUX|. Passing untrusted |
| // input to this function allows an attacker to influence those properties. See |
| // |d2i_X509_AUX| for details. |
| OPENSSL_EXPORT STACK_OF(X509_INFO) *PEM_X509_INFO_read_bio( |
| BIO *bp, STACK_OF(X509_INFO) *sk, pem_password_cb *cb, void *u); |
| |
| // PEM_X509_INFO_read behaves like |PEM_X509_INFO_read_bio| but reads from a |
| // |FILE|. |
| OPENSSL_EXPORT STACK_OF(X509_INFO) *PEM_X509_INFO_read(FILE *fp, |
| STACK_OF(X509_INFO) *sk, |
| pem_password_cb *cb, |
| void *u); |
| |
| OPENSSL_EXPORT int PEM_read(FILE *fp, char **name, char **header, |
| unsigned char **data, long *len); |
| OPENSSL_EXPORT int PEM_write(FILE *fp, const char *name, const char *hdr, |
| const unsigned char *data, long len); |
| OPENSSL_EXPORT void *PEM_ASN1_read(d2i_of_void *d2i, const char *name, FILE *fp, |
| void **x, pem_password_cb *cb, void *u); |
| OPENSSL_EXPORT int PEM_ASN1_write(i2d_of_void *i2d, const char *name, FILE *fp, |
| void *x, const EVP_CIPHER *enc, |
| const unsigned char *pass, int pass_len, |
| pem_password_cb *callback, void *u); |
| |
| // PEM_def_callback treats |userdata| as a string and copies it into |buf|, |
| // assuming its |size| is sufficient. Returns the length of the string, or -1 on |
| // error. Error cases the buffer being too small, or |buf| and |userdata| being |
| // NULL. Note that this is different from OpenSSL, which prompts for a password. |
| OPENSSL_EXPORT int PEM_def_callback(char *buf, int size, int rwflag, |
| void *userdata); |
| |
| |
| DECLARE_PEM_rw(X509, X509) |
| |
| // TODO(crbug.com/boringssl/426): When documenting these, copy the warning |
| // about auxiliary properties from |PEM_X509_INFO_read_bio|. |
| DECLARE_PEM_rw(X509_AUX, X509) |
| |
| DECLARE_PEM_rw(X509_REQ, X509_REQ) |
| DECLARE_PEM_write(X509_REQ_NEW, X509_REQ) |
| |
| DECLARE_PEM_rw(X509_CRL, X509_CRL) |
| |
| DECLARE_PEM_rw(PKCS7, PKCS7) |
| DECLARE_PEM_rw(PKCS8, X509_SIG) |
| |
| DECLARE_PEM_rw(PKCS8_PRIV_KEY_INFO, PKCS8_PRIV_KEY_INFO) |
| |
| DECLARE_PEM_rw_cb(RSAPrivateKey, RSA) |
| |
| DECLARE_PEM_rw_const(RSAPublicKey, RSA) |
| DECLARE_PEM_rw(RSA_PUBKEY, RSA) |
| |
| #ifndef OPENSSL_NO_DSA |
| |
| DECLARE_PEM_rw_cb(DSAPrivateKey, DSA) |
| |
| DECLARE_PEM_rw(DSA_PUBKEY, DSA) |
| |
| DECLARE_PEM_rw_const(DSAparams, DSA) |
| |
| #endif |
| |
| DECLARE_PEM_rw_cb(ECPrivateKey, EC_KEY) |
| DECLARE_PEM_rw(EC_PUBKEY, EC_KEY) |
| |
| |
| DECLARE_PEM_rw_const(DHparams, DH) |
| |
| |
| DECLARE_PEM_rw_cb(PrivateKey, EVP_PKEY) |
| |
| DECLARE_PEM_rw(PUBKEY, EVP_PKEY) |
| |
| OPENSSL_EXPORT int PEM_write_bio_PKCS8PrivateKey_nid(BIO *bp, const EVP_PKEY *x, |
| int nid, const char *pass, |
| int pass_len, |
| pem_password_cb *cb, |
| void *u); |
| OPENSSL_EXPORT int PEM_write_bio_PKCS8PrivateKey(BIO *bp, const EVP_PKEY *x, |
| const EVP_CIPHER *enc, |
| const char *pass, int pass_len, |
| pem_password_cb *cb, void *u); |
| OPENSSL_EXPORT int i2d_PKCS8PrivateKey_bio(BIO *bp, const EVP_PKEY *x, |
| const EVP_CIPHER *enc, |
| const char *pass, int pass_len, |
| pem_password_cb *cb, void *u); |
| OPENSSL_EXPORT int i2d_PKCS8PrivateKey_nid_bio(BIO *bp, const EVP_PKEY *x, |
| int nid, const char *pass, |
| int pass_len, |
| pem_password_cb *cb, void *u); |
| OPENSSL_EXPORT EVP_PKEY *d2i_PKCS8PrivateKey_bio(BIO *bp, EVP_PKEY **x, |
| pem_password_cb *cb, void *u); |
| |
| OPENSSL_EXPORT int i2d_PKCS8PrivateKey_fp(FILE *fp, const EVP_PKEY *x, |
| const EVP_CIPHER *enc, |
| const char *pass, int pass_len, |
| pem_password_cb *cb, void *u); |
| OPENSSL_EXPORT int i2d_PKCS8PrivateKey_nid_fp(FILE *fp, const EVP_PKEY *x, |
| int nid, const char *pass, |
| int pass_len, pem_password_cb *cb, |
| void *u); |
| OPENSSL_EXPORT int PEM_write_PKCS8PrivateKey_nid(FILE *fp, const EVP_PKEY *x, |
| int nid, const char *pass, |
| int pass_len, |
| pem_password_cb *cb, void *u); |
| |
| OPENSSL_EXPORT EVP_PKEY *d2i_PKCS8PrivateKey_fp(FILE *fp, EVP_PKEY **x, |
| pem_password_cb *cb, void *u); |
| |
| OPENSSL_EXPORT int PEM_write_PKCS8PrivateKey(FILE *fp, const EVP_PKEY *x, |
| const EVP_CIPHER *enc, |
| const char *pass, int pass_len, |
| pem_password_cb *cd, void *u); |
| |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #define PEM_R_BAD_BASE64_DECODE 100 |
| #define PEM_R_BAD_DECRYPT 101 |
| #define PEM_R_BAD_END_LINE 102 |
| #define PEM_R_BAD_IV_CHARS 103 |
| #define PEM_R_BAD_PASSWORD_READ 104 |
| #define PEM_R_CIPHER_IS_NULL 105 |
| #define PEM_R_ERROR_CONVERTING_PRIVATE_KEY 106 |
| #define PEM_R_NOT_DEK_INFO 107 |
| #define PEM_R_NOT_ENCRYPTED 108 |
| #define PEM_R_NOT_PROC_TYPE 109 |
| #define PEM_R_NO_START_LINE 110 |
| #define PEM_R_READ_KEY 111 |
| #define PEM_R_SHORT_HEADER 112 |
| #define PEM_R_UNSUPPORTED_CIPHER 113 |
| #define PEM_R_UNSUPPORTED_ENCRYPTION 114 |
| #define PEM_R_UNSUPPORTED_PROC_TYPE_VERSION 115 |
| |
| #endif // OPENSSL_HEADER_PEM_H |
