| // Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include <openssl/evp.h> | |
| #include <assert.h> | |
| #include <string.h> | |
| #include <openssl/err.h> | |
| #include <openssl/mem.h> | |
| #include <openssl/nid.h> | |
| #include "../internal.h" | |
| #include "internal.h" | |
| // Node depends on |EVP_R_NOT_XOF_OR_INVALID_LENGTH|. | |
| // | |
| // TODO(davidben): Fix Node to not touch the error queue itself and remove this. | |
| OPENSSL_DECLARE_ERROR_REASON(EVP, NOT_XOF_OR_INVALID_LENGTH) | |
| // The HPKE module uses the EVP error namespace, but it lives in another | |
| // directory. | |
| OPENSSL_DECLARE_ERROR_REASON(EVP, EMPTY_PSK) | |
| EVP_PKEY *EVP_PKEY_new(void) { | |
| EVP_PKEY *ret = | |
| reinterpret_cast<EVP_PKEY *>(OPENSSL_zalloc(sizeof(EVP_PKEY))); | |
| if (ret == NULL) { | |
| return NULL; | |
| } | |
| ret->type = EVP_PKEY_NONE; | |
| ret->references = 1; | |
| return ret; | |
| } | |
| static void free_it(EVP_PKEY *pkey) { | |
| if (pkey->ameth && pkey->ameth->pkey_free) { | |
| pkey->ameth->pkey_free(pkey); | |
| pkey->pkey = NULL; | |
| pkey->type = EVP_PKEY_NONE; | |
| } | |
| } | |
| void EVP_PKEY_free(EVP_PKEY *pkey) { | |
| if (pkey == NULL) { | |
| return; | |
| } | |
| if (!CRYPTO_refcount_dec_and_test_zero(&pkey->references)) { | |
| return; | |
| } | |
| free_it(pkey); | |
| OPENSSL_free(pkey); | |
| } | |
| int EVP_PKEY_up_ref(EVP_PKEY *pkey) { | |
| CRYPTO_refcount_inc(&pkey->references); | |
| return 1; | |
| } | |
| int EVP_PKEY_is_opaque(const EVP_PKEY *pkey) { | |
| if (pkey->ameth && pkey->ameth->pkey_opaque) { | |
| return pkey->ameth->pkey_opaque(pkey); | |
| } | |
| return 0; | |
| } | |
| int EVP_PKEY_cmp(const EVP_PKEY *a, const EVP_PKEY *b) { | |
| if (a->type != b->type) { | |
| return -1; | |
| } | |
| if (a->ameth) { | |
| int ret; | |
| // Compare parameters if the algorithm has them | |
| if (a->ameth->param_cmp) { | |
| ret = a->ameth->param_cmp(a, b); | |
| if (ret <= 0) { | |
| return ret; | |
| } | |
| } | |
| if (a->ameth->pub_cmp) { | |
| return a->ameth->pub_cmp(a, b); | |
| } | |
| } | |
| return -2; | |
| } | |
| int EVP_PKEY_copy_parameters(EVP_PKEY *to, const EVP_PKEY *from) { | |
| if (to->type == EVP_PKEY_NONE) { | |
| evp_pkey_set_method(to, from->ameth); | |
| } else if (to->type != from->type) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_DIFFERENT_KEY_TYPES); | |
| return 0; | |
| } | |
| if (EVP_PKEY_missing_parameters(from)) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_MISSING_PARAMETERS); | |
| return 0; | |
| } | |
| // Once set, parameters may not change. | |
| if (!EVP_PKEY_missing_parameters(to)) { | |
| if (EVP_PKEY_cmp_parameters(to, from) == 1) { | |
| return 1; | |
| } | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_DIFFERENT_PARAMETERS); | |
| return 0; | |
| } | |
| if (from->ameth && from->ameth->param_copy) { | |
| return from->ameth->param_copy(to, from); | |
| } | |
| // TODO(https://crbug.com/boringssl/536): If the algorithm takes no | |
| // parameters, copying them should vacuously succeed. | |
| return 0; | |
| } | |
| int EVP_PKEY_missing_parameters(const EVP_PKEY *pkey) { | |
| if (pkey->ameth && pkey->ameth->param_missing) { | |
| return pkey->ameth->param_missing(pkey); | |
| } | |
| return 0; | |
| } | |
| int EVP_PKEY_size(const EVP_PKEY *pkey) { | |
| if (pkey && pkey->ameth && pkey->ameth->pkey_size) { | |
| return pkey->ameth->pkey_size(pkey); | |
| } | |
| return 0; | |
| } | |
| int EVP_PKEY_bits(const EVP_PKEY *pkey) { | |
| if (pkey && pkey->ameth && pkey->ameth->pkey_bits) { | |
| return pkey->ameth->pkey_bits(pkey); | |
| } | |
| return 0; | |
| } | |
| int EVP_PKEY_id(const EVP_PKEY *pkey) { return pkey->type; } | |
| // evp_pkey_asn1_find returns the ASN.1 method table for the given |nid|, which | |
| // should be one of the |EVP_PKEY_*| values. It returns NULL if |nid| is | |
| // unknown. | |
| static const EVP_PKEY_ASN1_METHOD *evp_pkey_asn1_find(int nid) { | |
| switch (nid) { | |
| case EVP_PKEY_RSA: | |
| return &rsa_asn1_meth; | |
| case EVP_PKEY_EC: | |
| return &ec_asn1_meth; | |
| case EVP_PKEY_DSA: | |
| return &dsa_asn1_meth; | |
| case EVP_PKEY_ED25519: | |
| return &ed25519_asn1_meth; | |
| case EVP_PKEY_X25519: | |
| return &x25519_asn1_meth; | |
| default: | |
| return NULL; | |
| } | |
| } | |
| void evp_pkey_set_method(EVP_PKEY *pkey, const EVP_PKEY_ASN1_METHOD *method) { | |
| free_it(pkey); | |
| pkey->ameth = method; | |
| pkey->type = pkey->ameth->pkey_id; | |
| } | |
| int EVP_PKEY_type(int nid) { | |
| // In OpenSSL, this was used to map between type aliases. BoringSSL supports | |
| // no type aliases, so this function is just the identity. | |
| return nid; | |
| } | |
| int EVP_PKEY_assign(EVP_PKEY *pkey, int type, void *key) { | |
| // This function can only be used to assign RSA, DSA, EC, and DH keys. Other | |
| // key types have internal representations which are not exposed through the | |
| // public API. | |
| switch (type) { | |
| case EVP_PKEY_RSA: | |
| return EVP_PKEY_assign_RSA(pkey, reinterpret_cast<RSA *>(key)); | |
| case EVP_PKEY_DSA: | |
| return EVP_PKEY_assign_DSA(pkey, reinterpret_cast<DSA *>(key)); | |
| case EVP_PKEY_EC: | |
| return EVP_PKEY_assign_EC_KEY(pkey, reinterpret_cast<EC_KEY *>(key)); | |
| case EVP_PKEY_DH: | |
| return EVP_PKEY_assign_DH(pkey, reinterpret_cast<DH *>(key)); | |
| } | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_UNSUPPORTED_ALGORITHM); | |
| ERR_add_error_dataf("algorithm %d", type); | |
| return 0; | |
| } | |
| int EVP_PKEY_set_type(EVP_PKEY *pkey, int type) { | |
| if (pkey && pkey->pkey) { | |
| // This isn't strictly necessary, but historically |EVP_PKEY_set_type| would | |
| // clear |pkey| even if |evp_pkey_asn1_find| failed, so we preserve that | |
| // behavior. | |
| free_it(pkey); | |
| } | |
| const EVP_PKEY_ASN1_METHOD *ameth = evp_pkey_asn1_find(type); | |
| if (ameth == NULL) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_UNSUPPORTED_ALGORITHM); | |
| ERR_add_error_dataf("algorithm %d", type); | |
| return 0; | |
| } | |
| if (pkey) { | |
| evp_pkey_set_method(pkey, ameth); | |
| } | |
| return 1; | |
| } | |
| EVP_PKEY *EVP_PKEY_new_raw_private_key(int type, ENGINE *unused, | |
| const uint8_t *in, size_t len) { | |
| // To avoid pulling in all key types, look for specifically the key types that | |
| // support |set_priv_raw|. | |
| const EVP_PKEY_ASN1_METHOD *method; | |
| switch (type) { | |
| case EVP_PKEY_X25519: | |
| method = &x25519_asn1_meth; | |
| break; | |
| case EVP_PKEY_ED25519: | |
| method = &ed25519_asn1_meth; | |
| break; | |
| default: | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_UNSUPPORTED_ALGORITHM); | |
| return nullptr; | |
| } | |
| bssl::UniquePtr<EVP_PKEY> ret(EVP_PKEY_new()); | |
| if (ret == nullptr) { | |
| return nullptr; | |
| } | |
| evp_pkey_set_method(ret.get(), method); | |
| if (!ret->ameth->set_priv_raw(ret.get(), in, len)) { | |
| return nullptr; | |
| } | |
| return ret.release(); | |
| } | |
| EVP_PKEY *EVP_PKEY_new_raw_public_key(int type, ENGINE *unused, | |
| const uint8_t *in, size_t len) { | |
| // To avoid pulling in all key types, look for specifically the key types that | |
| // support |set_pub_raw|. | |
| const EVP_PKEY_ASN1_METHOD *method; | |
| switch (type) { | |
| case EVP_PKEY_X25519: | |
| method = &x25519_asn1_meth; | |
| break; | |
| case EVP_PKEY_ED25519: | |
| method = &ed25519_asn1_meth; | |
| break; | |
| default: | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_UNSUPPORTED_ALGORITHM); | |
| return nullptr; | |
| } | |
| bssl::UniquePtr<EVP_PKEY> ret(EVP_PKEY_new()); | |
| if (ret == nullptr) { | |
| return nullptr; | |
| } | |
| evp_pkey_set_method(ret.get(), method); | |
| if (!ret->ameth->set_pub_raw(ret.get(), in, len)) { | |
| return nullptr; | |
| } | |
| return ret.release(); | |
| } | |
| int EVP_PKEY_get_raw_private_key(const EVP_PKEY *pkey, uint8_t *out, | |
| size_t *out_len) { | |
| if (pkey->ameth->get_priv_raw == NULL) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_OPERATION_NOT_SUPPORTED_FOR_THIS_KEYTYPE); | |
| return 0; | |
| } | |
| return pkey->ameth->get_priv_raw(pkey, out, out_len); | |
| } | |
| int EVP_PKEY_get_raw_public_key(const EVP_PKEY *pkey, uint8_t *out, | |
| size_t *out_len) { | |
| if (pkey->ameth->get_pub_raw == NULL) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_OPERATION_NOT_SUPPORTED_FOR_THIS_KEYTYPE); | |
| return 0; | |
| } | |
| return pkey->ameth->get_pub_raw(pkey, out, out_len); | |
| } | |
| int EVP_PKEY_cmp_parameters(const EVP_PKEY *a, const EVP_PKEY *b) { | |
| if (a->type != b->type) { | |
| return -1; | |
| } | |
| if (a->ameth && a->ameth->param_cmp) { | |
| return a->ameth->param_cmp(a, b); | |
| } | |
| // TODO(https://crbug.com/boringssl/536): If the algorithm doesn't use | |
| // parameters, they should compare as vacuously equal. | |
| return -2; | |
| } | |
| int EVP_PKEY_CTX_set_signature_md(EVP_PKEY_CTX *ctx, const EVP_MD *md) { | |
| return EVP_PKEY_CTX_ctrl(ctx, -1, EVP_PKEY_OP_TYPE_SIG, EVP_PKEY_CTRL_MD, 0, | |
| (void *)md); | |
| } | |
| int EVP_PKEY_CTX_get_signature_md(EVP_PKEY_CTX *ctx, const EVP_MD **out_md) { | |
| return EVP_PKEY_CTX_ctrl(ctx, -1, EVP_PKEY_OP_TYPE_SIG, EVP_PKEY_CTRL_GET_MD, | |
| 0, (void *)out_md); | |
| } | |
| void *EVP_PKEY_get0(const EVP_PKEY *pkey) { | |
| // Node references, but never calls this function, so for now we return NULL. | |
| // If other projects require complete support, call |EVP_PKEY_get0_RSA|, etc., | |
| // rather than reading |pkey->pkey| directly. This avoids problems if our | |
| // internal representation does not match the type the caller expects from | |
| // OpenSSL. | |
| return NULL; | |
| } | |
| void OpenSSL_add_all_algorithms(void) {} | |
| void OPENSSL_add_all_algorithms_conf(void) {} | |
| void OpenSSL_add_all_ciphers(void) {} | |
| void OpenSSL_add_all_digests(void) {} | |
| void EVP_cleanup(void) {} | |
| int EVP_PKEY_set1_tls_encodedpoint(EVP_PKEY *pkey, const uint8_t *in, | |
| size_t len) { | |
| if (pkey->ameth->set1_tls_encodedpoint == NULL) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_OPERATION_NOT_SUPPORTED_FOR_THIS_KEYTYPE); | |
| return 0; | |
| } | |
| return pkey->ameth->set1_tls_encodedpoint(pkey, in, len); | |
| } | |
| size_t EVP_PKEY_get1_tls_encodedpoint(const EVP_PKEY *pkey, uint8_t **out_ptr) { | |
| if (pkey->ameth->get1_tls_encodedpoint == NULL) { | |
| OPENSSL_PUT_ERROR(EVP, EVP_R_OPERATION_NOT_SUPPORTED_FOR_THIS_KEYTYPE); | |
| return 0; | |
| } | |
| return pkey->ameth->get1_tls_encodedpoint(pkey, out_ptr); | |
| } | |
| int EVP_PKEY_base_id(const EVP_PKEY *pkey) { | |
| // OpenSSL has two notions of key type because it supports multiple OIDs for | |
| // the same algorithm: NID_rsa vs NID_rsaEncryption and five distinct spelling | |
| // of DSA. We do not support these, so the base ID is simply the ID. | |
| return EVP_PKEY_id(pkey); | |
| } |