| // Copyright 2017 The BoringSSL Authors | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #ifndef OPENSSL_HEADER_CRYPTO_FIPSMODULE_AES_INTERNAL_H | |
| #define OPENSSL_HEADER_CRYPTO_FIPSMODULE_AES_INTERNAL_H | |
| #include <stdlib.h> | |
| #include "../../internal.h" | |
| #include "../bcm_interface.h" | |
| BSSL_NAMESPACE_BEGIN | |
| // block128_f is the type of an AES block cipher implementation. | |
| // | |
| // Unlike upstream OpenSSL, it and the other functions in this file hard-code | |
| // `AES_KEY`. It is undefined in C to call a function pointer with anything | |
| // other than the original type. Thus we either must match `block128_f` to the | |
| // type signature of `BCM_aes_encrypt` and friends or pass in `void*` wrapper | |
| // functions. | |
| // | |
| // These functions are called exclusively with AES, so we use the former. | |
| typedef void (*block128_f)(const uint8_t in[16], uint8_t out[16], | |
| const AES_KEY *key); | |
| // ctr128_f is the type of a function that performs CTR-mode encryption. | |
| typedef void (*ctr128_f)(const uint8_t *in, uint8_t *out, size_t blocks, | |
| const AES_KEY *key, const uint8_t ivec[16]); | |
| // aes_ctr_set_key initialises `*aes_key` using `key_bytes` bytes from `key`, | |
| // where `key_bytes` must either be 16, 24 or 32. If not NULL, `*out_block` is | |
| // set to a function that encrypts single blocks. If not NULL, `*out_is_hwaes` | |
| // is set to whether the hardware AES implementation was used. It returns a | |
| // function for optimised CTR-mode. | |
| ctr128_f aes_ctr_set_key(AES_KEY *aes_key, int *out_is_hwaes, | |
| block128_f *out_block, const uint8_t *key, | |
| size_t key_bytes); | |
| // AES implementations. | |
| #if !defined(OPENSSL_NO_ASM) | |
| #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) | |
| #define HWAES | |
| #define HWAES_ECB | |
| inline int hwaes_capable() { return CRYPTO_is_AESNI_capable(); } | |
| #define VPAES | |
| #define VPAES_CBC | |
| inline int vpaes_capable() { return CRYPTO_is_SSSE3_capable(); } | |
| #elif defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64) | |
| #define HWAES | |
| inline int hwaes_capable() { return CRYPTO_is_ARMv8_AES_capable(); } | |
| #if defined(OPENSSL_ARM) | |
| #define BSAES | |
| #define VPAES | |
| inline int bsaes_capable() { return CRYPTO_is_NEON_capable(); } | |
| inline int vpaes_capable() { return CRYPTO_is_NEON_capable(); } | |
| #endif | |
| #if defined(OPENSSL_AARCH64) | |
| #define VPAES | |
| #define VPAES_CBC | |
| inline int vpaes_capable() { return CRYPTO_is_NEON_capable(); } | |
| #endif | |
| #endif | |
| #endif // !NO_ASM | |
| #if defined(HWAES) | |
| extern "C" int aes_hw_set_encrypt_key(const uint8_t *user_key, int bits, | |
| AES_KEY *key); | |
| extern "C" int aes_hw_set_decrypt_key(const uint8_t *user_key, int bits, | |
| AES_KEY *key); | |
| extern "C" void aes_hw_encrypt(const uint8_t *in, uint8_t *out, | |
| const AES_KEY *key); | |
| extern "C" void aes_hw_decrypt(const uint8_t *in, uint8_t *out, | |
| const AES_KEY *key); | |
| extern "C" void aes_hw_cbc_encrypt(const uint8_t *in, uint8_t *out, | |
| size_t length, const AES_KEY *key, | |
| uint8_t *ivec, int enc); | |
| extern "C" void aes_hw_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16]); | |
| #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) | |
| // On x86 and x86_64, `aes_hw_set_decrypt_key` is implemented in terms of | |
| // `aes_hw_set_encrypt_key` and a conversion function. | |
| extern "C" void aes_hw_encrypt_key_to_decrypt_key(AES_KEY *key); | |
| // There are two variants of this function, one which uses aeskeygenassist | |
| // ("base") and one which uses aesenclast + pshufb ("alt"). aesenclast is | |
| // overall faster but is slower on some older processors. It doesn't use AVX, | |
| // but AVX is used as a proxy to detecting this. See | |
| // https://groups.google.com/g/mailing.openssl.dev/c/OuFXwW4NfO8/m/7d2ZXVjkxVkJ | |
| // | |
| // TODO(davidben): It is unclear if the aeskeygenassist version is still | |
| // worthwhile. However, the aesenclast version requires SSSE3. SSSE3 long | |
| // predates AES-NI, but it's not clear if AES-NI implies SSSE3. In OpenSSL, the | |
| // CCM AES-NI assembly seems to assume it does. | |
| inline int aes_hw_set_encrypt_key_alt_capable() { | |
| return hwaes_capable() && CRYPTO_is_SSSE3_capable(); | |
| } | |
| inline int aes_hw_set_encrypt_key_alt_preferred() { | |
| return hwaes_capable() && CRYPTO_is_AVX_capable(); | |
| } | |
| extern "C" int aes_hw_set_encrypt_key_base(const uint8_t *user_key, int bits, | |
| AES_KEY *key); | |
| extern "C" int aes_hw_set_encrypt_key_alt(const uint8_t *user_key, int bits, | |
| AES_KEY *key); | |
| #endif // OPENSSL_X86 || OPENSSL_X86_64 | |
| #else | |
| // If HWAES isn't defined then we provide dummy functions for each of the hwaes | |
| // functions. | |
| inline int hwaes_capable() { return 0; } | |
| inline int aes_hw_set_encrypt_key(const uint8_t *user_key, int bits, | |
| AES_KEY *key) { | |
| abort(); | |
| } | |
| inline int aes_hw_set_decrypt_key(const uint8_t *user_key, int bits, | |
| AES_KEY *key) { | |
| abort(); | |
| } | |
| inline void aes_hw_encrypt(const uint8_t *in, uint8_t *out, | |
| const AES_KEY *key) { | |
| abort(); | |
| } | |
| inline void aes_hw_decrypt(const uint8_t *in, uint8_t *out, | |
| const AES_KEY *key) { | |
| abort(); | |
| } | |
| inline void aes_hw_cbc_encrypt(const uint8_t *in, uint8_t *out, size_t length, | |
| const AES_KEY *key, uint8_t *ivec, int enc) { | |
| abort(); | |
| } | |
| inline void aes_hw_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16]) { | |
| abort(); | |
| } | |
| #endif // !HWAES | |
| #if defined(HWAES_ECB) | |
| extern "C" void aes_hw_ecb_encrypt(const uint8_t *in, uint8_t *out, | |
| size_t length, const AES_KEY *key, int enc); | |
| #endif // HWAES_ECB | |
| #if defined(BSAES) | |
| // Note `bsaes_cbc_encrypt` requires `enc` to be zero. | |
| extern "C" void bsaes_cbc_encrypt(const uint8_t *in, uint8_t *out, | |
| size_t length, const AES_KEY *key, | |
| uint8_t ivec[16], int enc); | |
| extern "C" void bsaes_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16]); | |
| // VPAES to BSAES conversions are available on all BSAES platforms. | |
| extern "C" void vpaes_encrypt_key_to_bsaes(AES_KEY *out_bsaes, | |
| const AES_KEY *vpaes); | |
| extern "C" void vpaes_decrypt_key_to_bsaes(AES_KEY *out_bsaes, | |
| const AES_KEY *vpaes); | |
| void vpaes_ctr32_encrypt_blocks_with_bsaes(const uint8_t *in, uint8_t *out, | |
| size_t blocks, const AES_KEY *key, | |
| const uint8_t ivec[16]); | |
| #endif // !BSAES | |
| #if defined(VPAES) | |
| // On platforms where VPAES gets defined (just above), then these functions are | |
| // provided by asm. | |
| extern "C" int vpaes_set_encrypt_key(const uint8_t *userKey, int bits, | |
| AES_KEY *key); | |
| extern "C" int vpaes_set_decrypt_key(const uint8_t *userKey, int bits, | |
| AES_KEY *key); | |
| extern "C" void vpaes_encrypt(const uint8_t *in, uint8_t *out, | |
| const AES_KEY *key); | |
| extern "C" void vpaes_decrypt(const uint8_t *in, uint8_t *out, | |
| const AES_KEY *key); | |
| #if defined(VPAES_CBC) | |
| extern "C" void vpaes_cbc_encrypt(const uint8_t *in, uint8_t *out, | |
| size_t length, const AES_KEY *key, | |
| uint8_t *ivec, int enc); | |
| #endif | |
| extern "C" void vpaes_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16]); | |
| #else | |
| inline int vpaes_capable() { return 0; } | |
| // On other platforms, vpaes_capable() will always return false and so the | |
| // following will never be called. | |
| inline int vpaes_set_encrypt_key(const uint8_t *userKey, int bits, | |
| AES_KEY *key) { | |
| abort(); | |
| } | |
| inline int vpaes_set_decrypt_key(const uint8_t *userKey, int bits, | |
| AES_KEY *key) { | |
| abort(); | |
| } | |
| inline void vpaes_encrypt(const uint8_t *in, uint8_t *out, const AES_KEY *key) { | |
| abort(); | |
| } | |
| inline void vpaes_decrypt(const uint8_t *in, uint8_t *out, const AES_KEY *key) { | |
| abort(); | |
| } | |
| inline void vpaes_cbc_encrypt(const uint8_t *in, uint8_t *out, size_t length, | |
| const AES_KEY *key, uint8_t *ivec, int enc) { | |
| abort(); | |
| } | |
| inline void vpaes_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16]) { | |
| abort(); | |
| } | |
| #endif // !VPAES | |
| int aes_nohw_set_encrypt_key(const uint8_t *key, unsigned bits, | |
| AES_KEY *aeskey); | |
| int aes_nohw_set_decrypt_key(const uint8_t *key, unsigned bits, | |
| AES_KEY *aeskey); | |
| void aes_nohw_encrypt(const uint8_t *in, uint8_t *out, const AES_KEY *key); | |
| void aes_nohw_decrypt(const uint8_t *in, uint8_t *out, const AES_KEY *key); | |
| void aes_nohw_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, | |
| size_t blocks, const AES_KEY *key, | |
| const uint8_t ivec[16]); | |
| void aes_nohw_cbc_encrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t *ivec, int enc); | |
| // Modes | |
| inline void CRYPTO_xor16(uint8_t out[16], const uint8_t a[16], | |
| const uint8_t b[16]) { | |
| // TODO(davidben): Ideally we'd leave this to the compiler, which could use | |
| // vector registers, etc. But the compiler doesn't know that `in` and `out` | |
| // cannot partially alias. `restrict` is slightly two strict (we allow exact | |
| // aliasing), but perhaps in-place could be a separate function? | |
| static_assert(16 % sizeof(crypto_word_t) == 0, | |
| "block cannot be evenly divided into words"); | |
| for (size_t i = 0; i < 16; i += sizeof(crypto_word_t)) { | |
| CRYPTO_store_word_le( | |
| out + i, CRYPTO_load_word_le(a + i) ^ CRYPTO_load_word_le(b + i)); | |
| } | |
| } | |
| // CTR. | |
| // CRYPTO_ctr128_encrypt_ctr32 encrypts (or decrypts, it's the same in CTR mode) | |
| // `len` bytes from `in` to `out` using `block` in counter mode. There's no | |
| // requirement that `len` be a multiple of any value and any partial blocks are | |
| // stored in `ecount_buf` and `*num`, which must be zeroed before the initial | |
| // call. The counter is a 128-bit, big-endian value in `ivec` and is | |
| // incremented by this function. If the counter overflows, it wraps around. | |
| // `ctr` must be a function that performs CTR mode but only deals with the lower | |
| // 32 bits of the counter. | |
| void CRYPTO_ctr128_encrypt_ctr32(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| uint8_t ecount_buf[16], unsigned *num, | |
| ctr128_f ctr); | |
| // GCM. | |
| // | |
| // This API differs from the upstream API slightly. The `GCM128_CONTEXT` does | |
| // not have a `key` pointer that points to the key as upstream's version does. | |
| // Instead, every function takes a `key` parameter. This way `GCM128_CONTEXT` | |
| // can be safely copied. Additionally, `gcm_key` is split into a separate | |
| // struct. | |
| // gcm_impl_t specifies an assembly implementation of AES-GCM. | |
| enum gcm_impl_t { | |
| gcm_separate = 0, // No combined AES-GCM, but may have AES-CTR and GHASH. | |
| gcm_x86_aesni, | |
| gcm_x86_vaes_avx2, | |
| gcm_x86_vaes_avx512, | |
| gcm_arm64_aes, | |
| gcm_arm64_aes_eor3, | |
| }; | |
| typedef struct { uint64_t hi,lo; } u128; | |
| // gmult_func multiplies `Xi` by the GCM key and writes the result back to | |
| // `Xi`. | |
| typedef void (*gmult_func)(uint8_t Xi[16], const u128 Htable[16]); | |
| // ghash_func repeatedly multiplies `Xi` by the GCM key and adds in blocks from | |
| // `inp`. The result is written back to `Xi` and the `len` argument must be a | |
| // multiple of 16. | |
| typedef void (*ghash_func)(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *inp, size_t len); | |
| typedef struct gcm128_key_st { | |
| u128 Htable[16]; | |
| gmult_func gmult; | |
| ghash_func ghash; | |
| AES_KEY aes; | |
| ctr128_f ctr; | |
| block128_f block; | |
| enum gcm_impl_t impl; | |
| } GCM128_KEY; | |
| // GCM128_CONTEXT contains state for a single GCM operation. The structure | |
| // should be zero-initialized before use. | |
| typedef struct { | |
| // The following 5 names follow names in GCM specification | |
| uint8_t Yi[16]; | |
| uint8_t EKi[16]; | |
| uint8_t EK0[16]; | |
| struct { | |
| uint64_t aad; | |
| uint64_t msg; | |
| } len; | |
| uint8_t Xi[16]; | |
| unsigned mres, ares; | |
| } GCM128_CONTEXT; | |
| #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) | |
| // crypto_gcm_clmul_enabled returns one if the CLMUL implementation of GCM is | |
| // used. | |
| int crypto_gcm_clmul_enabled(); | |
| #endif | |
| // CRYPTO_ghash_init writes a precomputed table of powers of `gcm_key` to | |
| // `out_table` and sets `*out_mult` and `*out_hash` to (potentially hardware | |
| // accelerated) functions for performing operations in the GHASH field. | |
| void CRYPTO_ghash_init(gmult_func *out_mult, ghash_func *out_hash, | |
| u128 out_table[16], const uint8_t gcm_key[16]); | |
| // CRYPTO_gcm128_init_aes_key initialises `gcm_key` to with AES key `key`. | |
| void CRYPTO_gcm128_init_aes_key(GCM128_KEY *gcm_key, const uint8_t *key, | |
| size_t key_bytes); | |
| // CRYPTO_gcm128_init_ctx initializes `ctx` to encrypt with `key` and `iv`. | |
| void CRYPTO_gcm128_init_ctx(const GCM128_KEY *key, GCM128_CONTEXT *ctx, | |
| const uint8_t *iv, size_t iv_len); | |
| // CRYPTO_gcm128_aad adds to the authenticated data for an instance of GCM. | |
| // This must be called before and data is encrypted. `key` must be the same | |
| // value that was passed to `CRYPTO_gcm128_init_ctx`. It returns one on success | |
| // and zero otherwise. | |
| int CRYPTO_gcm128_aad(const GCM128_KEY *key, GCM128_CONTEXT *ctx, | |
| const uint8_t *aad, size_t aad_len); | |
| // CRYPTO_gcm128_encrypt encrypts `len` bytes from `in` to `out`. `key` must be | |
| // the same value that was passed to `CRYPTO_gcm128_init_ctx`. It returns one on | |
| // success and zero otherwise. | |
| int CRYPTO_gcm128_encrypt(const GCM128_KEY *key, GCM128_CONTEXT *ctx, | |
| const uint8_t *in, uint8_t *out, size_t len); | |
| // CRYPTO_gcm128_decrypt decrypts `len` bytes from `in` to `out`. `key` must be | |
| // the same value that was passed to `CRYPTO_gcm128_init_ctx`. It returns one on | |
| // success and zero otherwise. | |
| int CRYPTO_gcm128_decrypt(const GCM128_KEY *key, GCM128_CONTEXT *ctx, | |
| const uint8_t *in, uint8_t *out, size_t len); | |
| // CRYPTO_gcm128_finish calculates the authenticator and compares it against | |
| // `len` bytes of `tag`. `key` must be the same value that was passed to | |
| // `CRYPTO_gcm128_init_ctx`. It returns one on success and zero otherwise. | |
| int CRYPTO_gcm128_finish(const GCM128_KEY *key, GCM128_CONTEXT *ctx, | |
| const uint8_t *tag, size_t len); | |
| // CRYPTO_gcm128_tag calculates the authenticator and copies it into `tag`. | |
| // The minimum of `len` and 16 bytes are copied into `tag`. `key` must be the | |
| // same value that was passed to `CRYPTO_gcm128_init_ctx`. | |
| void CRYPTO_gcm128_tag(const GCM128_KEY *key, GCM128_CONTEXT *ctx, uint8_t *tag, | |
| size_t len); | |
| // GCM assembly. | |
| void gcm_init_nohw(u128 Htable[16], const uint64_t H[2]); | |
| void gcm_gmult_nohw(uint8_t Xi[16], const u128 Htable[16]); | |
| void gcm_ghash_nohw(uint8_t Xi[16], const u128 Htable[16], const uint8_t *inp, | |
| size_t len); | |
| #if !defined(OPENSSL_NO_ASM) | |
| #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) | |
| #define GCM_FUNCREF | |
| extern "C" void gcm_init_clmul(u128 Htable[16], const uint64_t Xi[2]); | |
| extern "C" void gcm_gmult_clmul(uint8_t Xi[16], const u128 Htable[16]); | |
| extern "C" void gcm_ghash_clmul(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *inp, size_t len); | |
| void gcm_init_ssse3(u128 Htable[16], const uint64_t Xi[2]); | |
| extern "C" void gcm_gmult_ssse3(uint8_t Xi[16], const u128 Htable[16]); | |
| extern "C" void gcm_ghash_ssse3(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *in, size_t len); | |
| #if defined(OPENSSL_X86_64) | |
| #define GHASH_ASM_X86_64 | |
| extern "C" void gcm_init_avx(u128 Htable[16], const uint64_t Xi[2]); | |
| extern "C" void gcm_gmult_avx(uint8_t Xi[16], const u128 Htable[16]); | |
| extern "C" void gcm_ghash_avx(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *in, size_t len); | |
| #define HW_GCM | |
| extern "C" size_t aesni_gcm_encrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| const u128 Htable[16], uint8_t Xi[16]); | |
| extern "C" size_t aesni_gcm_decrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| const u128 Htable[16], uint8_t Xi[16]); | |
| extern "C" void gcm_init_vpclmulqdq_avx2(u128 Htable[16], const uint64_t H[2]); | |
| extern "C" void gcm_gmult_vpclmulqdq_avx2(uint8_t Xi[16], | |
| const u128 Htable[16]); | |
| extern "C" void gcm_ghash_vpclmulqdq_avx2(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *in, size_t len); | |
| extern "C" void aes_gcm_enc_update_vaes_avx2(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16], | |
| const u128 Htable[16], | |
| uint8_t Xi[16]); | |
| extern "C" void aes_gcm_dec_update_vaes_avx2(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16], | |
| const u128 Htable[16], | |
| uint8_t Xi[16]); | |
| extern "C" void gcm_init_vpclmulqdq_avx512(u128 Htable[16], | |
| const uint64_t H[2]); | |
| extern "C" void gcm_gmult_vpclmulqdq_avx512(uint8_t Xi[16], | |
| const u128 Htable[16]); | |
| extern "C" void gcm_ghash_vpclmulqdq_avx512(uint8_t Xi[16], | |
| const u128 Htable[16], | |
| const uint8_t *in, size_t len); | |
| extern "C" void aes_gcm_enc_update_vaes_avx512(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16], | |
| const u128 Htable[16], | |
| uint8_t Xi[16]); | |
| extern "C" void aes_gcm_dec_update_vaes_avx512(const uint8_t *in, uint8_t *out, | |
| size_t len, const AES_KEY *key, | |
| const uint8_t ivec[16], | |
| const u128 Htable[16], | |
| uint8_t Xi[16]); | |
| #endif // OPENSSL_X86_64 | |
| #if defined(OPENSSL_X86) | |
| #define GHASH_ASM_X86 | |
| #endif // OPENSSL_X86 | |
| #elif defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64) | |
| #define GHASH_ASM_ARM | |
| #define GCM_FUNCREF | |
| inline int gcm_pmull_capable() { return CRYPTO_is_ARMv8_PMULL_capable(); } | |
| inline int gcm_eor3_capable() { | |
| // SHA3 and EOR3 belong to the same ISA extension. | |
| return CRYPTO_is_ARMv8_PMULL_capable() && CRYPTO_is_ARMv8_SHA3_capable(); | |
| } | |
| extern "C" void gcm_init_v8(u128 Htable[16], const uint64_t H[2]); | |
| extern "C" void gcm_gmult_v8(uint8_t Xi[16], const u128 Htable[16]); | |
| extern "C" void gcm_ghash_v8(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *inp, size_t len); | |
| inline int gcm_neon_capable() { return CRYPTO_is_NEON_capable(); } | |
| extern "C" void gcm_init_neon(u128 Htable[16], const uint64_t H[2]); | |
| extern "C" void gcm_gmult_neon(uint8_t Xi[16], const u128 Htable[16]); | |
| extern "C" void gcm_ghash_neon(uint8_t Xi[16], const u128 Htable[16], | |
| const uint8_t *inp, size_t len); | |
| #if defined(OPENSSL_AARCH64) | |
| #define HW_GCM | |
| // These functions are defined in aesv8-gcm-armv8.pl. | |
| extern "C" void aes_gcm_enc_kernel(const uint8_t *in, uint64_t in_bits, | |
| void *out, void *Xi, uint8_t *ivec, | |
| const AES_KEY *key, const u128 Htable[16]); | |
| extern "C" void aes_gcm_dec_kernel(const uint8_t *in, uint64_t in_bits, | |
| void *out, void *Xi, uint8_t *ivec, | |
| const AES_KEY *key, const u128 Htable[16]); | |
| extern "C" void aes_gcm_enc_kernel_eor3(const uint8_t *in, uint64_t in_bits, | |
| void *out, void *Xi, uint8_t *ivec, | |
| const AES_KEY *key, | |
| const u128 Htable[16]); | |
| extern "C" void aes_gcm_dec_kernel_eor3(const uint8_t *in, uint64_t in_bits, | |
| void *out, void *Xi, uint8_t *ivec, | |
| const AES_KEY *key, | |
| const u128 Htable[16]); | |
| #endif | |
| #endif | |
| #endif // OPENSSL_NO_ASM | |
| // CBC. | |
| // cbc128_f is the type of a function that performs CBC-mode encryption. | |
| typedef void (*cbc128_f)(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], int enc); | |
| // CRYPTO_cbc128_encrypt encrypts `len` bytes from `in` to `out` using the | |
| // given IV and block cipher in CBC mode. The input need not be a multiple of | |
| // 128 bits long, but the output will round up to the nearest 128 bit multiple, | |
| // zero padding the input if needed. The IV will be updated on return. | |
| void CRYPTO_cbc128_encrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| block128_f block); | |
| // CRYPTO_cbc128_decrypt decrypts `len` bytes from `in` to `out` using the | |
| // given IV and block cipher in CBC mode. If `len` is not a multiple of 128 | |
| // bits then only that many bytes will be written, but a multiple of 128 bits | |
| // is always read from `in`. The IV will be updated on return. | |
| void CRYPTO_cbc128_decrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| block128_f block); | |
| // OFB. | |
| // CRYPTO_ofb128_encrypt encrypts (or decrypts, it's the same with OFB mode) | |
| // `len` bytes from `in` to `out` using `block` in OFB mode. There's no | |
| // requirement that `len` be a multiple of any value and any partial blocks are | |
| // stored in `ivec` and `*num`, the latter must be zero before the initial | |
| // call. | |
| void CRYPTO_ofb128_encrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], unsigned *num, | |
| block128_f block); | |
| // CFB. | |
| // CRYPTO_cfb128_encrypt encrypts (or decrypts, if `enc` is zero) `len` bytes | |
| // from `in` to `out` using `block` in CFB mode. There's no requirement that | |
| // `len` be a multiple of any value and any partial blocks are stored in `ivec` | |
| // and `*num`, the latter must be zero before the initial call. | |
| void CRYPTO_cfb128_encrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], unsigned *num, | |
| int enc, block128_f block); | |
| // CRYPTO_cfb128_8_encrypt encrypts (or decrypts, if `enc` is zero) `len` bytes | |
| // from `in` to `out` using `block` in CFB-8 mode. Prior to the first call | |
| // `num` should be set to zero. | |
| void CRYPTO_cfb128_8_encrypt(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| unsigned *num, int enc, block128_f block); | |
| // CRYPTO_cfb128_1_encrypt encrypts (or decrypts, if `enc` is zero) `len` bytes | |
| // from `in` to `out` using `block` in CFB-1 mode. Prior to the first call | |
| // `num` should be set to zero. | |
| void CRYPTO_cfb128_1_encrypt(const uint8_t *in, uint8_t *out, size_t bits, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| unsigned *num, int enc, block128_f block); | |
| size_t CRYPTO_cts128_encrypt_block(const uint8_t *in, uint8_t *out, size_t len, | |
| const AES_KEY *key, uint8_t ivec[16], | |
| block128_f block); | |
| BSSL_NAMESPACE_END | |
| #endif // OPENSSL_HEADER_CRYPTO_FIPSMODULE_AES_INTERNAL_H |