| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. |
| * |
| * Portions of the attached software ("Contribution") are developed by |
| * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project. |
| * |
| * The Contribution is licensed pursuant to the OpenSSL open source |
| * license provided above. |
| * |
| * ECC cipher suite support in OpenSSL originally written by |
| * Vipul Gupta and Sumit Gupta of Sun Microsystems Laboratories. |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2005 Nokia. All rights reserved. |
| * |
| * The portions of the attached software ("Contribution") is developed by |
| * Nokia Corporation and is licensed pursuant to the OpenSSL open source |
| * license. |
| * |
| * The Contribution, originally written by Mika Kousa and Pasi Eronen of |
| * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites |
| * support (see RFC 4279) to OpenSSL. |
| * |
| * No patent licenses or other rights except those expressly stated in |
| * the OpenSSL open source license shall be deemed granted or received |
| * expressly, by implication, estoppel, or otherwise. |
| * |
| * No assurances are provided by Nokia that the Contribution does not |
| * infringe the patent or other intellectual property rights of any third |
| * party or that the license provides you with all the necessary rights |
| * to make use of the Contribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN |
| * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA |
| * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY |
| * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR |
| * OTHERWISE. */ |
| |
| #define REUSE_CIPHER_BUG |
| #define NETSCAPE_HANG_BUG |
| |
| #include <stdio.h> |
| |
| #include <openssl/bn.h> |
| #include <openssl/buf.h> |
| #include <openssl/cipher.h> |
| #include <openssl/dh.h> |
| #include <openssl/ec.h> |
| #include <openssl/ecdsa.h> |
| #include <openssl/evp.h> |
| #include <openssl/hmac.h> |
| #include <openssl/md5.h> |
| #include <openssl/mem.h> |
| #include <openssl/obj.h> |
| #include <openssl/rand.h> |
| #include <openssl/sha.h> |
| #include <openssl/x509.h> |
| |
| #include "ssl_locl.h" |
| #include "../crypto/dh/internal.h" |
| |
| static const SSL_METHOD *ssl3_get_server_method(int ver); |
| |
| static const SSL_METHOD *ssl3_get_server_method(int ver) |
| { |
| if (ver == SSL3_VERSION) |
| return(SSLv3_server_method()); |
| else |
| return(NULL); |
| } |
| |
| IMPLEMENT_ssl3_meth_func(SSLv3_server_method, |
| ssl3_accept, |
| ssl_undefined_function, |
| ssl3_get_server_method) |
| |
| int ssl3_accept(SSL *s) |
| { |
| BUF_MEM *buf; |
| unsigned long alg_k; |
| unsigned long alg_a; |
| void (*cb)(const SSL *ssl,int type,int val)=NULL; |
| int ret= -1; |
| int new_state,state,skip=0; |
| |
| ERR_clear_error(); |
| ERR_clear_system_error(); |
| |
| if (s->info_callback != NULL) |
| cb=s->info_callback; |
| else if (s->ctx->info_callback != NULL) |
| cb=s->ctx->info_callback; |
| |
| /* init things to blank */ |
| s->in_handshake++; |
| if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s); |
| |
| if (s->cert == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_accept, SSL_R_NO_CERTIFICATE_SET); |
| return(-1); |
| } |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| /* If we're awaiting a HeartbeatResponse, pretend we |
| * already got and don't await it anymore, because |
| * Heartbeats don't make sense during handshakes anyway. |
| */ |
| if (s->tlsext_hb_pending) |
| { |
| s->tlsext_hb_pending = 0; |
| s->tlsext_hb_seq++; |
| } |
| #endif |
| |
| for (;;) |
| { |
| state=s->state; |
| |
| switch (s->state) |
| { |
| case SSL_ST_RENEGOTIATE: |
| s->renegotiate=1; |
| /* s->state=SSL_ST_ACCEPT; */ |
| |
| case SSL_ST_BEFORE: |
| case SSL_ST_ACCEPT: |
| case SSL_ST_BEFORE|SSL_ST_ACCEPT: |
| case SSL_ST_OK|SSL_ST_ACCEPT: |
| |
| s->server=1; |
| if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1); |
| |
| if ((s->version>>8) != 3) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_accept, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| s->type=SSL_ST_ACCEPT; |
| |
| if (s->init_buf == NULL) |
| { |
| if ((buf=BUF_MEM_new()) == NULL) |
| { |
| ret= -1; |
| goto end; |
| } |
| if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) |
| { |
| ret= -1; |
| goto end; |
| } |
| s->init_buf=buf; |
| } |
| |
| if (!ssl3_setup_buffers(s)) |
| { |
| ret= -1; |
| goto end; |
| } |
| |
| s->init_num=0; |
| s->s3->flags &= ~SSL3_FLAGS_SGC_RESTART_DONE; |
| s->s3->flags &= ~TLS1_FLAGS_SKIP_CERT_VERIFY; |
| |
| if (s->state != SSL_ST_RENEGOTIATE) |
| { |
| /* Ok, we now need to push on a buffering BIO so that |
| * the output is sent in a way that TCP likes :-) |
| */ |
| if (!ssl_init_wbio_buffer(s,1)) { ret= -1; goto end; } |
| |
| ssl3_init_finished_mac(s); |
| s->state=SSL3_ST_SR_CLNT_HELLO_A; |
| s->ctx->stats.sess_accept++; |
| } |
| else if (!s->s3->send_connection_binding && |
| !(s->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION)) |
| { |
| /* Server attempting to renegotiate with |
| * client that doesn't support secure |
| * renegotiation. |
| */ |
| OPENSSL_PUT_ERROR(SSL, ssl3_accept, SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED); |
| ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_HANDSHAKE_FAILURE); |
| ret = -1; |
| goto end; |
| } |
| else |
| { |
| /* s->state == SSL_ST_RENEGOTIATE, |
| * we will just send a HelloRequest */ |
| s->ctx->stats.sess_accept_renegotiate++; |
| s->state=SSL3_ST_SW_HELLO_REQ_A; |
| } |
| break; |
| |
| case SSL3_ST_SW_HELLO_REQ_A: |
| case SSL3_ST_SW_HELLO_REQ_B: |
| |
| s->shutdown=0; |
| ret=ssl3_send_hello_request(s); |
| if (ret <= 0) goto end; |
| s->s3->tmp.next_state=SSL3_ST_SW_HELLO_REQ_C; |
| s->state=SSL3_ST_SW_FLUSH; |
| s->init_num=0; |
| |
| ssl3_init_finished_mac(s); |
| break; |
| |
| case SSL3_ST_SW_HELLO_REQ_C: |
| s->state=SSL_ST_OK; |
| break; |
| |
| case SSL3_ST_SR_CLNT_HELLO_A: |
| case SSL3_ST_SR_CLNT_HELLO_B: |
| case SSL3_ST_SR_CLNT_HELLO_C: |
| case SSL3_ST_SR_CLNT_HELLO_D: |
| s->shutdown=0; |
| ret=ssl3_get_client_hello(s); |
| if (ret == PENDING_SESSION) { |
| s->state = SSL3_ST_SR_CLNT_HELLO_D; |
| s->rwstate = SSL_PENDING_SESSION; |
| goto end; |
| } |
| if (ret <= 0) goto end; |
| s->renegotiate = 2; |
| s->state=SSL3_ST_SW_SRVR_HELLO_A; |
| s->init_num=0; |
| break; |
| |
| case SSL3_ST_SW_SRVR_HELLO_A: |
| case SSL3_ST_SW_SRVR_HELLO_B: |
| ret=ssl3_send_server_hello(s); |
| if (ret <= 0) goto end; |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s->hit) |
| { |
| if (s->tlsext_ticket_expected) |
| s->state=SSL3_ST_SW_SESSION_TICKET_A; |
| else |
| s->state=SSL3_ST_SW_CHANGE_A; |
| } |
| #else |
| if (s->hit) |
| s->state=SSL3_ST_SW_CHANGE_A; |
| #endif |
| else |
| #ifndef OPENSSL_NO_TLSEXT |
| s->state = SSL3_ST_SW_SUPPLEMENTAL_DATA_A; |
| #else |
| s->state = SSL3_ST_SW_CERT_A; |
| #endif |
| s->init_num = 0; |
| break; |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| case SSL3_ST_SW_SUPPLEMENTAL_DATA_A: |
| case SSL3_ST_SW_SUPPLEMENTAL_DATA_B: |
| /* We promised to send an audit proof in the hello. */ |
| if (s->s3->tlsext_authz_promised_to_client) |
| { |
| ret = tls1_send_server_supplemental_data(s); |
| if (ret <= 0) goto end; |
| } |
| else |
| skip = 1; |
| |
| s->state = SSL3_ST_SW_CERT_A; |
| s->init_num = 0; |
| break; |
| #endif |
| |
| case SSL3_ST_SW_CERT_A: |
| case SSL3_ST_SW_CERT_B: |
| /* Check if it is anon DH or anon ECDH, */ |
| /* non-RSA PSK or KRB5 or SRP */ |
| if (!(s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) |
| /* Among PSK ciphersuites only RSA_PSK uses server certificate */ |
| && !(s->s3->tmp.new_cipher->algorithm_auth & SSL_aPSK && |
| !(s->s3->tmp.new_cipher->algorithm_mkey & SSL_kRSA)) |
| && !(s->s3->tmp.new_cipher->algorithm_auth & SSL_aKRB5)) |
| { |
| ret=ssl3_send_server_certificate(s); |
| if (ret <= 0) goto end; |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s->tlsext_status_expected) |
| s->state=SSL3_ST_SW_CERT_STATUS_A; |
| else |
| s->state=SSL3_ST_SW_KEY_EXCH_A; |
| } |
| else |
| { |
| skip = 1; |
| s->state=SSL3_ST_SW_KEY_EXCH_A; |
| } |
| #else |
| } |
| else |
| skip=1; |
| |
| s->state=SSL3_ST_SW_KEY_EXCH_A; |
| #endif |
| s->init_num=0; |
| break; |
| |
| case SSL3_ST_SW_KEY_EXCH_A: |
| case SSL3_ST_SW_KEY_EXCH_B: |
| alg_k = s->s3->tmp.new_cipher->algorithm_mkey; |
| alg_a = s->s3->tmp.new_cipher->algorithm_auth; |
| |
| /* clear this, it may get reset by |
| * send_server_key_exchange */ |
| if ((s->options & SSL_OP_EPHEMERAL_RSA) |
| ) |
| /* option SSL_OP_EPHEMERAL_RSA sends temporary RSA key |
| * even when forbidden by protocol specs |
| * (handshake may fail as clients are not required to |
| * be able to handle this) */ |
| s->s3->tmp.use_rsa_tmp=1; |
| else |
| s->s3->tmp.use_rsa_tmp=0; |
| |
| |
| /* only send if a DH key exchange, fortezza or |
| * RSA but we have a sign only certificate |
| * |
| * PSK: may send PSK identity hints |
| * |
| * For ECC ciphersuites, we send a serverKeyExchange |
| * message only if the cipher suite is either |
| * ECDH-anon or ECDHE. In other cases, the |
| * server certificate contains the server's |
| * public key for key exchange. |
| */ |
| if (s->s3->tmp.use_rsa_tmp |
| /* PSK: send ServerKeyExchange if either: |
| * - PSK identity hint is provided, or |
| * - the key exchange is kEECDH. */ |
| #ifndef OPENSSL_NO_PSK |
| || ((alg_a & SSL_aPSK) && ((alg_k & SSL_kEECDH) || s->ctx->psk_identity_hint)) |
| #endif |
| || (alg_k & SSL_kEDH) |
| || (alg_k & SSL_kEECDH) |
| || ((alg_k & SSL_kRSA) |
| && (s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey == NULL |
| || (SSL_C_IS_EXPORT(s->s3->tmp.new_cipher) |
| && EVP_PKEY_size(s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey)*8 > SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher) |
| ) |
| ) |
| ) |
| ) |
| { |
| ret=ssl3_send_server_key_exchange(s); |
| if (ret <= 0) goto end; |
| } |
| else |
| skip=1; |
| |
| s->state=SSL3_ST_SW_CERT_REQ_A; |
| s->init_num=0; |
| break; |
| |
| case SSL3_ST_SW_CERT_REQ_A: |
| case SSL3_ST_SW_CERT_REQ_B: |
| if (/* don't request cert unless asked for it: */ |
| !(s->verify_mode & SSL_VERIFY_PEER) || |
| /* Don't request a certificate if an obc was presented */ |
| ((s->verify_mode & SSL_VERIFY_PEER_IF_NO_OBC) && |
| s->s3->tlsext_channel_id_valid) || |
| /* if SSL_VERIFY_CLIENT_ONCE is set, |
| * don't request cert during re-negotiation: */ |
| ((s->session->peer != NULL) && |
| (s->verify_mode & SSL_VERIFY_CLIENT_ONCE)) || |
| /* never request cert in anonymous ciphersuites |
| * (see section "Certificate request" in SSL 3 drafts |
| * and in RFC 2246): */ |
| ((s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) && |
| /* ... except when the application insists on verification |
| * (against the specs, but s3_clnt.c accepts this for SSL 3) */ |
| !(s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)) || |
| /* never request cert in Kerberos ciphersuites */ |
| (s->s3->tmp.new_cipher->algorithm_auth & SSL_aKRB5) |
| /* With normal PSK Certificates and |
| * Certificate Requests are omitted */ |
| || (s->s3->tmp.new_cipher->algorithm_mkey & SSL_kPSK)) |
| { |
| /* no cert request */ |
| skip=1; |
| s->s3->tmp.cert_request=0; |
| s->state=SSL3_ST_SW_SRVR_DONE_A; |
| if (s->s3->handshake_buffer) |
| if (!ssl3_digest_cached_records(s)) |
| return -1; |
| } |
| else |
| { |
| s->s3->tmp.cert_request=1; |
| ret=ssl3_send_certificate_request(s); |
| if (ret <= 0) goto end; |
| #ifndef NETSCAPE_HANG_BUG |
| s->state=SSL3_ST_SW_SRVR_DONE_A; |
| #else |
| s->state=SSL3_ST_SW_FLUSH; |
| s->s3->tmp.next_state=SSL3_ST_SR_CERT_A; |
| #endif |
| s->init_num=0; |
| } |
| break; |
| |
| case SSL3_ST_SW_SRVR_DONE_A: |
| case SSL3_ST_SW_SRVR_DONE_B: |
| ret=ssl3_send_server_done(s); |
| if (ret <= 0) goto end; |
| s->s3->tmp.next_state=SSL3_ST_SR_CERT_A; |
| s->state=SSL3_ST_SW_FLUSH; |
| s->init_num=0; |
| break; |
| |
| case SSL3_ST_SW_FLUSH: |
| |
| /* This code originally checked to see if |
| * any data was pending using BIO_CTRL_INFO |
| * and then flushed. This caused problems |
| * as documented in PR#1939. The proposed |
| * fix doesn't completely resolve this issue |
| * as buggy implementations of BIO_CTRL_PENDING |
| * still exist. So instead we just flush |
| * unconditionally. |
| */ |
| |
| s->rwstate=SSL_WRITING; |
| if (BIO_flush(s->wbio) <= 0) |
| { |
| ret= -1; |
| goto end; |
| } |
| s->rwstate=SSL_NOTHING; |
| |
| s->state=s->s3->tmp.next_state; |
| break; |
| |
| case SSL3_ST_SR_CERT_A: |
| case SSL3_ST_SR_CERT_B: |
| /* Check for second client hello (MS SGC) */ |
| ret = ssl3_check_client_hello(s); |
| if (ret <= 0) |
| goto end; |
| if (ret == 2) |
| s->state = SSL3_ST_SR_CLNT_HELLO_C; |
| else { |
| if (s->s3->tmp.cert_request) |
| { |
| ret=ssl3_get_client_certificate(s); |
| if (ret <= 0) goto end; |
| } |
| s->init_num=0; |
| s->state=SSL3_ST_SR_KEY_EXCH_A; |
| } |
| break; |
| |
| case SSL3_ST_SR_KEY_EXCH_A: |
| case SSL3_ST_SR_KEY_EXCH_B: |
| ret=ssl3_get_client_key_exchange(s); |
| if (ret <= 0) |
| goto end; |
| if (ret == 2) |
| { |
| /* For the ECDH ciphersuites when |
| * the client sends its ECDH pub key in |
| * a certificate, the CertificateVerify |
| * message is not sent. |
| * Also for GOST ciphersuites when |
| * the client uses its key from the certificate |
| * for key exchange. |
| */ |
| s->init_num = 0; |
| s->state=SSL3_ST_SR_POST_CLIENT_CERT; |
| } |
| else if (SSL_USE_SIGALGS(s)) |
| { |
| s->state=SSL3_ST_SR_CERT_VRFY_A; |
| s->init_num=0; |
| if (!s->session->peer) |
| break; |
| /* For sigalgs freeze the handshake buffer |
| * at this point and digest cached records. |
| */ |
| if (!s->s3->handshake_buffer) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_accept, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| s->s3->flags |= TLS1_FLAGS_KEEP_HANDSHAKE; |
| if (!ssl3_digest_cached_records(s)) |
| return -1; |
| } |
| else |
| { |
| int offset=0; |
| int dgst_num; |
| |
| s->state=SSL3_ST_SR_CERT_VRFY_A; |
| s->init_num=0; |
| |
| /* We need to get hashes here so if there is |
| * a client cert, it can be verified |
| * FIXME - digest processing for CertificateVerify |
| * should be generalized. But it is next step |
| */ |
| if (s->s3->handshake_buffer) |
| if (!ssl3_digest_cached_records(s)) |
| return -1; |
| for (dgst_num=0; dgst_num<SSL_MAX_DIGEST;dgst_num++) |
| if (s->s3->handshake_dgst[dgst_num]) |
| { |
| int dgst_size; |
| |
| s->method->ssl3_enc->cert_verify_mac(s,EVP_MD_CTX_type(s->s3->handshake_dgst[dgst_num]),&(s->s3->tmp.cert_verify_md[offset])); |
| dgst_size=EVP_MD_CTX_size(s->s3->handshake_dgst[dgst_num]); |
| if (dgst_size < 0) |
| { |
| ret = -1; |
| goto end; |
| } |
| offset+=dgst_size; |
| } |
| } |
| break; |
| |
| case SSL3_ST_SR_CERT_VRFY_A: |
| case SSL3_ST_SR_CERT_VRFY_B: |
| |
| /* we should decide if we expected this one */ |
| ret=ssl3_get_cert_verify(s); |
| if (ret <= 0) goto end; |
| |
| s->state=SSL3_ST_SR_POST_CLIENT_CERT; |
| s->init_num=0; |
| break; |
| |
| case SSL3_ST_SR_POST_CLIENT_CERT: { |
| char next_proto_neg = 0; |
| char channel_id = 0; |
| #if !defined(OPENSSL_NO_TLSEXT) |
| # if !defined(OPENSSL_NO_NEXTPROTONEG) |
| next_proto_neg = s->s3->next_proto_neg_seen; |
| # endif |
| channel_id = s->s3->tlsext_channel_id_valid; |
| #endif |
| |
| if (next_proto_neg) |
| s->state=SSL3_ST_SR_NEXT_PROTO_A; |
| else if (channel_id) |
| s->state=SSL3_ST_SR_CHANNEL_ID_A; |
| else |
| s->state=SSL3_ST_SR_FINISHED_A; |
| break; |
| } |
| |
| #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG) |
| case SSL3_ST_SR_NEXT_PROTO_A: |
| case SSL3_ST_SR_NEXT_PROTO_B: |
| ret=ssl3_get_next_proto(s); |
| if (ret <= 0) goto end; |
| s->init_num = 0; |
| if (s->s3->tlsext_channel_id_valid) |
| s->state=SSL3_ST_SR_CHANNEL_ID_A; |
| else |
| s->state=SSL3_ST_SR_FINISHED_A; |
| break; |
| #endif |
| |
| #if !defined(OPENSSL_NO_TLSEXT) |
| case SSL3_ST_SR_CHANNEL_ID_A: |
| case SSL3_ST_SR_CHANNEL_ID_B: |
| ret=ssl3_get_channel_id(s); |
| if (ret <= 0) goto end; |
| s->init_num = 0; |
| s->state=SSL3_ST_SR_FINISHED_A; |
| break; |
| #endif |
| |
| case SSL3_ST_SR_FINISHED_A: |
| case SSL3_ST_SR_FINISHED_B: |
| ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A, |
| SSL3_ST_SR_FINISHED_B); |
| if (ret <= 0) goto end; |
| if (s->hit) |
| s->state=SSL_ST_OK; |
| #ifndef OPENSSL_NO_TLSEXT |
| else if (s->tlsext_ticket_expected) |
| s->state=SSL3_ST_SW_SESSION_TICKET_A; |
| #endif |
| else |
| s->state=SSL3_ST_SW_CHANGE_A; |
| /* If this is a full handshake with ChannelID then |
| * record the hashshake hashes in |s->session| in case |
| * we need them to verify a ChannelID signature on a |
| * resumption of this session in the future. */ |
| if (!s->hit && s->s3->tlsext_channel_id_new) |
| { |
| ret = tls1_record_handshake_hashes_for_channel_id(s); |
| if (ret <= 0) goto end; |
| } |
| s->init_num=0; |
| break; |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| case SSL3_ST_SW_SESSION_TICKET_A: |
| case SSL3_ST_SW_SESSION_TICKET_B: |
| ret=ssl3_send_newsession_ticket(s); |
| if (ret <= 0) goto end; |
| s->state=SSL3_ST_SW_CHANGE_A; |
| s->init_num=0; |
| break; |
| |
| case SSL3_ST_SW_CERT_STATUS_A: |
| case SSL3_ST_SW_CERT_STATUS_B: |
| ret=ssl3_send_cert_status(s); |
| if (ret <= 0) goto end; |
| s->state=SSL3_ST_SW_KEY_EXCH_A; |
| s->init_num=0; |
| break; |
| |
| #endif |
| |
| case SSL3_ST_SW_CHANGE_A: |
| case SSL3_ST_SW_CHANGE_B: |
| |
| s->session->cipher=s->s3->tmp.new_cipher; |
| if (!s->method->ssl3_enc->setup_key_block(s)) |
| { ret= -1; goto end; } |
| |
| ret=ssl3_send_change_cipher_spec(s, |
| SSL3_ST_SW_CHANGE_A,SSL3_ST_SW_CHANGE_B); |
| |
| if (ret <= 0) goto end; |
| s->state=SSL3_ST_SW_FINISHED_A; |
| s->init_num=0; |
| |
| if (!s->method->ssl3_enc->change_cipher_state(s, |
| SSL3_CHANGE_CIPHER_SERVER_WRITE)) |
| { |
| ret= -1; |
| goto end; |
| } |
| |
| break; |
| |
| case SSL3_ST_SW_FINISHED_A: |
| case SSL3_ST_SW_FINISHED_B: |
| ret=ssl3_send_finished(s, |
| SSL3_ST_SW_FINISHED_A,SSL3_ST_SW_FINISHED_B, |
| s->method->ssl3_enc->server_finished_label, |
| s->method->ssl3_enc->server_finished_label_len); |
| if (ret <= 0) goto end; |
| s->state=SSL3_ST_SW_FLUSH; |
| if (s->hit) |
| s->s3->tmp.next_state=SSL3_ST_SR_POST_CLIENT_CERT; |
| else |
| s->s3->tmp.next_state=SSL_ST_OK; |
| s->init_num=0; |
| break; |
| |
| case SSL_ST_OK: |
| /* clean a few things up */ |
| ssl3_cleanup_key_block(s); |
| |
| BUF_MEM_free(s->init_buf); |
| s->init_buf=NULL; |
| |
| /* remove buffering on output */ |
| ssl_free_wbio_buffer(s); |
| |
| s->init_num=0; |
| |
| /* If we aren't retaining peer certificates then we can |
| * discard it now. */ |
| if (s->session->peer && s->ctx->retain_only_sha256_of_client_certs) |
| { |
| X509_free(s->session->peer); |
| s->session->peer = NULL; |
| } |
| |
| if (s->renegotiate == 2) /* skipped if we just sent a HelloRequest */ |
| { |
| s->renegotiate=0; |
| s->new_session=0; |
| |
| ssl_update_cache(s,SSL_SESS_CACHE_SERVER); |
| |
| s->ctx->stats.sess_accept_good++; |
| /* s->server=1; */ |
| s->handshake_func=ssl3_accept; |
| |
| if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_DONE,1); |
| } |
| |
| ret = 1; |
| goto end; |
| /* break; */ |
| |
| default: |
| OPENSSL_PUT_ERROR(SSL, ssl3_accept, SSL_R_UNKNOWN_STATE); |
| ret= -1; |
| goto end; |
| /* break; */ |
| } |
| |
| if (!s->s3->tmp.reuse_message && !skip) |
| { |
| if (s->debug) |
| { |
| if ((ret=BIO_flush(s->wbio)) <= 0) |
| goto end; |
| } |
| |
| |
| if ((cb != NULL) && (s->state != state)) |
| { |
| new_state=s->state; |
| s->state=state; |
| cb(s,SSL_CB_ACCEPT_LOOP,1); |
| s->state=new_state; |
| } |
| } |
| skip=0; |
| } |
| end: |
| /* BIO_flush(s->wbio); */ |
| |
| s->in_handshake--; |
| if (cb != NULL) |
| cb(s,SSL_CB_ACCEPT_EXIT,ret); |
| return(ret); |
| } |
| |
| int ssl3_send_hello_request(SSL *s) |
| { |
| |
| if (s->state == SSL3_ST_SW_HELLO_REQ_A) |
| { |
| ssl_set_handshake_header(s, SSL3_MT_HELLO_REQUEST, 0); |
| s->state=SSL3_ST_SW_HELLO_REQ_B; |
| } |
| |
| /* SSL3_ST_SW_HELLO_REQ_B */ |
| return ssl_do_write(s); |
| } |
| |
| int ssl3_check_client_hello(SSL *s) |
| { |
| int ok; |
| long n; |
| |
| /* this function is called when we really expect a Certificate message, |
| * so permit appropriate message length */ |
| n=s->method->ssl_get_message(s, |
| SSL3_ST_SR_CERT_A, |
| SSL3_ST_SR_CERT_B, |
| -1, |
| s->max_cert_list, |
| &ok); |
| if (!ok) return((int)n); |
| s->s3->tmp.reuse_message = 1; |
| if (s->s3->tmp.message_type == SSL3_MT_CLIENT_HELLO) |
| { |
| /* We only allow the client to restart the handshake once per |
| * negotiation. */ |
| if (s->s3->flags & SSL3_FLAGS_SGC_RESTART_DONE) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_check_client_hello, SSL_R_MULTIPLE_SGC_RESTARTS); |
| return -1; |
| } |
| /* Throw away what we have done so far in the current handshake, |
| * which will now be aborted. (A full SSL_clear would be too much.) */ |
| #ifndef OPENSSL_NO_DH |
| if (s->s3->tmp.dh != NULL) |
| { |
| DH_free(s->s3->tmp.dh); |
| s->s3->tmp.dh = NULL; |
| } |
| #endif |
| #ifndef OPENSSL_NO_ECDH |
| if (s->s3->tmp.ecdh != NULL) |
| { |
| EC_KEY_free(s->s3->tmp.ecdh); |
| s->s3->tmp.ecdh = NULL; |
| } |
| #endif |
| s->s3->flags |= SSL3_FLAGS_SGC_RESTART_DONE; |
| return 2; |
| } |
| return 1; |
| } |
| |
| int ssl3_get_client_hello(SSL *s) |
| { |
| int i,j,ok,al=SSL_AD_INTERNAL_ERROR,ret= -1; |
| unsigned int cookie_len; |
| long n; |
| unsigned long id; |
| unsigned char *p,*d; |
| SSL_CIPHER *c; |
| STACK_OF(SSL_CIPHER) *ciphers=NULL; |
| |
| if (s->state == SSL3_ST_SR_CLNT_HELLO_C) |
| goto retry_cert; |
| |
| /* We do this so that we will respond with our native type. |
| * If we are TLSv1 and we get SSLv3, we will respond with TLSv1, |
| * This down switching should be handled by a different method. |
| * If we are SSLv3, we will respond with SSLv3, even if prompted with |
| * TLSv1. |
| */ |
| if (s->state == SSL3_ST_SR_CLNT_HELLO_A |
| ) |
| { |
| s->state=SSL3_ST_SR_CLNT_HELLO_B; |
| } |
| if (s->state != SSL3_ST_SR_CLNT_HELLO_D) |
| { |
| s->first_packet=1; |
| n=s->method->ssl_get_message(s, |
| SSL3_ST_SR_CLNT_HELLO_B, |
| SSL3_ST_SR_CLNT_HELLO_C, |
| SSL3_MT_CLIENT_HELLO, |
| SSL3_RT_MAX_PLAIN_LENGTH, |
| &ok); |
| |
| if (!ok) return((int)n); |
| s->first_packet=0; |
| } |
| else |
| { |
| /* We have previously parsed the ClientHello message, and can't |
| * call ssl_get_message again without hashing the message into |
| * the Finished digest again. */ |
| n = s->init_num; |
| } |
| |
| d=p=(unsigned char *)s->init_msg; |
| |
| /* use version from inside client hello, not from record header |
| * (may differ: see RFC 2246, Appendix E, second paragraph) */ |
| s->client_version=(((int)p[0])<<8)|(int)p[1]; |
| p+=2; |
| |
| if (SSL_IS_DTLS(s) ? (s->client_version > s->version && |
| s->method->version != DTLS_ANY_VERSION) |
| : (s->client_version < s->version)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_WRONG_VERSION_NUMBER); |
| if ((s->client_version>>8) == SSL3_VERSION_MAJOR && |
| !s->enc_write_ctx && !s->write_hash) |
| { |
| /* similar to ssl3_get_record, send alert using remote version number */ |
| s->version = s->client_version; |
| } |
| al = SSL_AD_PROTOCOL_VERSION; |
| goto f_err; |
| } |
| |
| /* If we require cookies and this ClientHello doesn't |
| * contain one, just return since we do not want to |
| * allocate any memory yet. So check cookie length... |
| */ |
| if (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE) |
| { |
| unsigned int session_length, cookie_length; |
| |
| session_length = *(p + SSL3_RANDOM_SIZE); |
| cookie_length = *(p + SSL3_RANDOM_SIZE + session_length + 1); |
| |
| if (cookie_length == 0) |
| return 1; |
| } |
| |
| /* load the client random */ |
| memcpy(s->s3->client_random,p,SSL3_RANDOM_SIZE); |
| p+=SSL3_RANDOM_SIZE; |
| |
| /* get the session-id */ |
| j= *(p++); |
| |
| s->hit=0; |
| /* Versions before 0.9.7 always allow clients to resume sessions in renegotiation. |
| * 0.9.7 and later allow this by default, but optionally ignore resumption requests |
| * with flag SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION (it's a new flag rather |
| * than a change to default behavior so that applications relying on this for security |
| * won't even compile against older library versions). |
| * |
| * 1.0.1 and later also have a function SSL_renegotiate_abbreviated() to request |
| * renegotiation but not a new session (s->new_session remains unset): for servers, |
| * this essentially just means that the SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION |
| * setting will be ignored. |
| */ |
| if ((s->new_session && (s->options & SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION))) |
| { |
| if (!ssl_get_new_session(s,1)) |
| goto err; |
| } |
| else |
| { |
| i=ssl_get_prev_session(s, p, j, d + n); |
| if (i == 1) |
| { /* previous session */ |
| s->hit=1; |
| } |
| else if (i == -1) |
| goto err; |
| else if (i == PENDING_SESSION) |
| { |
| ret = PENDING_SESSION; |
| goto err; |
| } |
| else /* i == 0 */ |
| { |
| if (!ssl_get_new_session(s,1)) |
| goto err; |
| } |
| } |
| |
| p+=j; |
| |
| if (SSL_IS_DTLS(s)) |
| { |
| /* cookie stuff */ |
| cookie_len = *(p++); |
| |
| /* |
| * The ClientHello may contain a cookie even if the |
| * HelloVerify message has not been sent--make sure that it |
| * does not cause an overflow. |
| */ |
| if ( cookie_len > sizeof(s->d1->rcvd_cookie)) |
| { |
| /* too much data */ |
| al = SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_COOKIE_MISMATCH); |
| goto f_err; |
| } |
| |
| /* verify the cookie if appropriate option is set. */ |
| if ((SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE) && |
| cookie_len > 0) |
| { |
| memcpy(s->d1->rcvd_cookie, p, cookie_len); |
| |
| if ( s->ctx->app_verify_cookie_cb != NULL) |
| { |
| if ( s->ctx->app_verify_cookie_cb(s, s->d1->rcvd_cookie, |
| cookie_len) == 0) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_COOKIE_MISMATCH); |
| goto f_err; |
| } |
| /* else cookie verification succeeded */ |
| } |
| else if ( memcmp(s->d1->rcvd_cookie, s->d1->cookie, |
| s->d1->cookie_len) != 0) /* default verification */ |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_COOKIE_MISMATCH); |
| goto f_err; |
| } |
| /* Set to -2 so if successful we return 2 */ |
| ret = -2; |
| } |
| |
| p += cookie_len; |
| if (s->method->version == DTLS_ANY_VERSION) |
| { |
| /* Select version to use */ |
| if (s->client_version <= DTLS1_2_VERSION && |
| !(s->options & SSL_OP_NO_DTLSv1_2)) |
| { |
| s->version = DTLS1_2_VERSION; |
| s->method = DTLSv1_2_server_method(); |
| } |
| else if (tls1_suiteb(s)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_ONLY_DTLS_1_2_ALLOWED_IN_SUITEB_MODE); |
| s->version = s->client_version; |
| al = SSL_AD_PROTOCOL_VERSION; |
| goto f_err; |
| } |
| else if (s->client_version <= DTLS1_VERSION && |
| !(s->options & SSL_OP_NO_DTLSv1)) |
| { |
| s->version = DTLS1_VERSION; |
| s->method = DTLSv1_server_method(); |
| } |
| else |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_WRONG_VERSION_NUMBER); |
| s->version = s->client_version; |
| al = SSL_AD_PROTOCOL_VERSION; |
| goto f_err; |
| } |
| s->session->ssl_version = s->version; |
| } |
| } |
| |
| n2s(p,i); |
| if ((i == 0) && (j != 0)) |
| { |
| /* we need a cipher if we are not resuming a session */ |
| al=SSL_AD_ILLEGAL_PARAMETER; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_NO_CIPHERS_SPECIFIED); |
| goto f_err; |
| } |
| if ((p+i) >= (d+n)) |
| { |
| /* not enough data */ |
| al=SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_LENGTH_MISMATCH); |
| goto f_err; |
| } |
| if ((i > 0) && (ssl_bytes_to_cipher_list(s,p,i,&(ciphers)) |
| == NULL)) |
| { |
| goto err; |
| } |
| p+=i; |
| |
| /* If it is a hit, check that the cipher is in the list */ |
| if ((s->hit) && (i > 0)) |
| { |
| j=0; |
| id=s->session->cipher->id; |
| |
| #ifdef CIPHER_DEBUG |
| printf("client sent %d ciphers\n",sk_num(ciphers)); |
| #endif |
| for (i=0; i<sk_SSL_CIPHER_num(ciphers); i++) |
| { |
| c=sk_SSL_CIPHER_value(ciphers,i); |
| #ifdef CIPHER_DEBUG |
| printf("client [%2d of %2d]:%s\n", |
| i,sk_num(ciphers),SSL_CIPHER_get_name(c)); |
| #endif |
| if (c->id == id) |
| { |
| j=1; |
| break; |
| } |
| } |
| /* Disabled because it can be used in a ciphersuite downgrade |
| * attack: CVE-2010-4180. |
| */ |
| #if 0 |
| if (j == 0 && (s->options & SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG) && (sk_SSL_CIPHER_num(ciphers) == 1)) |
| { |
| /* Special case as client bug workaround: the previously used cipher may |
| * not be in the current list, the client instead might be trying to |
| * continue using a cipher that before wasn't chosen due to server |
| * preferences. We'll have to reject the connection if the cipher is not |
| * enabled, though. */ |
| c = sk_SSL_CIPHER_value(ciphers, 0); |
| if (sk_SSL_CIPHER_find(SSL_get_ciphers(s), c) >= 0) |
| { |
| s->session->cipher = c; |
| j = 1; |
| } |
| } |
| #endif |
| if (j == 0) |
| { |
| /* we need to have the cipher in the cipher |
| * list if we are asked to reuse it */ |
| al=SSL_AD_ILLEGAL_PARAMETER; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_REQUIRED_CIPHER_MISSING); |
| goto f_err; |
| } |
| } |
| |
| /* compression */ |
| i= *(p++); |
| if ((p+i) > (d+n)) |
| { |
| /* not enough data */ |
| al=SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_LENGTH_MISMATCH); |
| goto f_err; |
| } |
| for (j=0; j<i; j++) |
| { |
| if (p[j] == 0) break; |
| } |
| |
| p+=i; |
| if (j >= i) |
| { |
| /* no compress */ |
| al=SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_NO_COMPRESSION_SPECIFIED); |
| goto f_err; |
| } |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| /* TLS extensions*/ |
| if (s->version >= SSL3_VERSION) |
| { |
| if (!ssl_parse_clienthello_tlsext(s,&p,d,n)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_PARSE_TLSEXT); |
| goto err; |
| } |
| } |
| |
| /* Check if we want to use external pre-shared secret for this |
| * handshake for not reused session only. We need to generate |
| * server_random before calling tls_session_secret_cb in order to allow |
| * SessionTicket processing to use it in key derivation. */ |
| { |
| unsigned char *pos; |
| pos=s->s3->server_random; |
| if (ssl_fill_hello_random(s, 1, pos, SSL3_RANDOM_SIZE) <= 0) |
| { |
| goto f_err; |
| } |
| } |
| |
| if (!s->hit && s->version >= TLS1_VERSION && s->tls_session_secret_cb) |
| { |
| SSL_CIPHER *pref_cipher=NULL; |
| |
| s->session->master_key_length=sizeof(s->session->master_key); |
| if(s->tls_session_secret_cb(s, s->session->master_key, &s->session->master_key_length, |
| ciphers, &pref_cipher, s->tls_session_secret_cb_arg)) |
| { |
| s->hit=1; |
| s->session->ciphers=ciphers; |
| s->session->verify_result=X509_V_OK; |
| |
| ciphers=NULL; |
| |
| /* check if some cipher was preferred by call back */ |
| pref_cipher=pref_cipher ? pref_cipher : ssl3_choose_cipher(s, s->session->ciphers, ssl_get_cipher_preferences(s)); |
| if (pref_cipher == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_NO_SHARED_CIPHER); |
| goto f_err; |
| } |
| |
| s->session->cipher=pref_cipher; |
| |
| if (s->cipher_list) |
| ssl_cipher_preference_list_free(s->cipher_list); |
| |
| if (s->cipher_list_by_id) |
| sk_SSL_CIPHER_free(s->cipher_list_by_id); |
| |
| s->cipher_list = ssl_cipher_preference_list_from_ciphers(s->session->ciphers); |
| s->cipher_list_by_id = sk_SSL_CIPHER_dup(s->session->ciphers); |
| } |
| } |
| #endif |
| |
| /* Worst case, we will use the NULL compression, but if we have other |
| * options, we will now look for them. We have i-1 compression |
| * algorithms from the client, starting at q. */ |
| s->s3->tmp.new_compression=NULL; |
| /* If compression is disabled we'd better not try to resume a session |
| * using compression. |
| */ |
| if (s->session->compress_meth != 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_INCONSISTENT_COMPRESSION); |
| goto f_err; |
| } |
| |
| /* Given s->session->ciphers and SSL_get_ciphers, we must |
| * pick a cipher */ |
| |
| if (!s->hit) |
| { |
| s->session->compress_meth=0; |
| if (s->session->ciphers != NULL) |
| sk_SSL_CIPHER_free(s->session->ciphers); |
| s->session->ciphers=ciphers; |
| if (ciphers == NULL) |
| { |
| al=SSL_AD_ILLEGAL_PARAMETER; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_NO_CIPHERS_PASSED); |
| goto f_err; |
| } |
| ciphers=NULL; |
| /* Let cert callback update server certificates if required */ |
| retry_cert: |
| if (s->cert->cert_cb) |
| { |
| int rv = s->cert->cert_cb(s, s->cert->cert_cb_arg); |
| if (rv == 0) |
| { |
| al=SSL_AD_INTERNAL_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_CERT_CB_ERROR); |
| goto f_err; |
| } |
| if (rv < 0) |
| { |
| s->rwstate=SSL_X509_LOOKUP; |
| return -1; |
| } |
| s->rwstate = SSL_NOTHING; |
| } |
| c=ssl3_choose_cipher(s,s->session->ciphers, |
| ssl_get_cipher_preferences(s)); |
| |
| if (c == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_NO_SHARED_CIPHER); |
| goto f_err; |
| } |
| s->s3->tmp.new_cipher=c; |
| } |
| else |
| { |
| /* Session-id reuse */ |
| #ifdef REUSE_CIPHER_BUG |
| STACK_OF(SSL_CIPHER) *sk; |
| SSL_CIPHER *nc=NULL; |
| SSL_CIPHER *ec=NULL; |
| |
| if (s->options & SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG) |
| { |
| sk=s->session->ciphers; |
| for (i=0; i<sk_SSL_CIPHER_num(sk); i++) |
| { |
| c=sk_SSL_CIPHER_value(sk,i); |
| if (c->algorithm_enc & SSL_eNULL) |
| nc=c; |
| if (SSL_C_IS_EXPORT(c)) |
| ec=c; |
| } |
| if (nc != NULL) |
| s->s3->tmp.new_cipher=nc; |
| else if (ec != NULL) |
| s->s3->tmp.new_cipher=ec; |
| else |
| s->s3->tmp.new_cipher=s->session->cipher; |
| } |
| else |
| #endif |
| s->s3->tmp.new_cipher=s->session->cipher; |
| } |
| |
| if (!SSL_USE_SIGALGS(s) || !(s->verify_mode & SSL_VERIFY_PEER)) |
| { |
| if (!ssl3_digest_cached_records(s)) |
| goto f_err; |
| } |
| |
| /* we now have the following setup. |
| * client_random |
| * cipher_list - our prefered list of ciphers |
| * ciphers - the clients prefered list of ciphers |
| * compression - basically ignored right now |
| * ssl version is set - sslv3 |
| * s->session - The ssl session has been setup. |
| * s->hit - session reuse flag |
| * s->tmp.new_cipher - the new cipher to use. |
| */ |
| |
| /* Handles TLS extensions that we couldn't check earlier */ |
| if (s->version >= SSL3_VERSION) |
| { |
| if (ssl_check_clienthello_tlsext_late(s) <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_hello, SSL_R_CLIENTHELLO_TLSEXT); |
| goto err; |
| } |
| } |
| |
| if (ret < 0) ret=-ret; |
| if (0) |
| { |
| f_err: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| } |
| err: |
| if (ciphers != NULL) sk_SSL_CIPHER_free(ciphers); |
| return ret; |
| } |
| |
| int ssl3_send_server_hello(SSL *s) |
| { |
| unsigned char *buf; |
| unsigned char *p,*d; |
| int i,sl; |
| unsigned long l; |
| |
| if (s->state == SSL3_ST_SW_SRVR_HELLO_A) |
| { |
| /* We only accept ChannelIDs on connections with ECDHE in order |
| * to avoid a known attack while we fix ChannelID itself. */ |
| if (s->s3 && |
| s->s3->tlsext_channel_id_valid && |
| (s->s3->tmp.new_cipher->algorithm_mkey & SSL_kEECDH) == 0) |
| s->s3->tlsext_channel_id_valid = 0; |
| |
| /* If this is a resumption and the original handshake didn't |
| * support ChannelID then we didn't record the original |
| * handshake hashes in the session and so cannot resume with |
| * ChannelIDs. */ |
| if (s->hit && |
| s->s3->tlsext_channel_id_new && |
| s->session->original_handshake_hash_len == 0) |
| s->s3->tlsext_channel_id_valid = 0; |
| |
| if (s->mode & SSL_MODE_RELEASE_BUFFERS) |
| { |
| /* Free s->session->ciphers in order to release memory. This |
| * breaks SSL_get_shared_ciphers(), but many servers will |
| * prefer the memory savings. |
| * |
| * It also breaks REUSE_CIPHER_BUG, which is disabled |
| * in our build. */ |
| sk_SSL_CIPHER_free(s->session->ciphers); |
| s->session->ciphers = NULL; |
| } |
| |
| buf=(unsigned char *)s->init_buf->data; |
| #ifdef OPENSSL_NO_TLSEXT |
| p=s->s3->server_random; |
| if (ssl_fill_hello_random(s, 1, p, SSL3_RANDOM_SIZE) <= 0) |
| return -1; |
| #endif |
| /* Do the message type and length last */ |
| d=p= ssl_handshake_start(s); |
| |
| *(p++)=s->version>>8; |
| *(p++)=s->version&0xff; |
| |
| /* Random stuff */ |
| memcpy(p,s->s3->server_random,SSL3_RANDOM_SIZE); |
| p+=SSL3_RANDOM_SIZE; |
| |
| /* There are several cases for the session ID to send |
| * back in the server hello: |
| * - For session reuse from the session cache, |
| * we send back the old session ID. |
| * - If stateless session reuse (using a session ticket) |
| * is successful, we send back the client's "session ID" |
| * (which doesn't actually identify the session). |
| * - If it is a new session, we send back the new |
| * session ID. |
| * - However, if we want the new session to be single-use, |
| * we send back a 0-length session ID. |
| * s->hit is non-zero in either case of session reuse, |
| * so the following won't overwrite an ID that we're supposed |
| * to send back. |
| */ |
| if (!(s->ctx->session_cache_mode & SSL_SESS_CACHE_SERVER) |
| && !s->hit) |
| s->session->session_id_length=0; |
| |
| sl=s->session->session_id_length; |
| if (sl > (int)sizeof(s->session->session_id)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_hello, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| *(p++)=sl; |
| memcpy(p,s->session->session_id,sl); |
| p+=sl; |
| |
| /* put the cipher */ |
| i=ssl3_put_cipher_by_char(s->s3->tmp.new_cipher,p); |
| p+=i; |
| |
| /* put the compression method */ |
| *(p++)=0; |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ssl_prepare_serverhello_tlsext(s) <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_hello, SSL_R_SERVERHELLO_TLSEXT); |
| return -1; |
| } |
| if ((p = ssl_add_serverhello_tlsext(s, p, buf+SSL3_RT_MAX_PLAIN_LENGTH)) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_hello, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| #endif |
| /* do the header */ |
| l=(p-d); |
| ssl_set_handshake_header(s, SSL3_MT_SERVER_HELLO, l); |
| s->state=SSL3_ST_SW_SRVR_HELLO_B; |
| } |
| |
| /* SSL3_ST_SW_SRVR_HELLO_B */ |
| return ssl_do_write(s); |
| } |
| |
| int ssl3_send_server_done(SSL *s) |
| { |
| |
| if (s->state == SSL3_ST_SW_SRVR_DONE_A) |
| { |
| ssl_set_handshake_header(s, SSL3_MT_SERVER_DONE, 0); |
| s->state = SSL3_ST_SW_SRVR_DONE_B; |
| } |
| |
| /* SSL3_ST_SW_SRVR_DONE_B */ |
| return ssl_do_write(s); |
| } |
| |
| int ssl3_send_server_key_exchange(SSL *s) |
| { |
| #ifndef OPENSSL_NO_RSA |
| unsigned char *q; |
| int j,num; |
| RSA *rsa; |
| unsigned char md_buf[MD5_DIGEST_LENGTH+SHA_DIGEST_LENGTH]; |
| unsigned int u; |
| #endif |
| #ifndef OPENSSL_NO_DH |
| DH *dh=NULL,*dhp; |
| #endif |
| #ifndef OPENSSL_NO_ECDH |
| EC_KEY *ecdh=NULL, *ecdhp; |
| unsigned char *encodedPoint = NULL; |
| int encodedlen = 0; |
| int curve_id = 0; |
| BN_CTX *bn_ctx = NULL; |
| #endif |
| EVP_PKEY *pkey; |
| const EVP_MD *md = NULL; |
| unsigned char *p,*d; |
| int al,i; |
| unsigned long alg_k; |
| unsigned long alg_a; |
| int n; |
| CERT *cert; |
| BIGNUM *r[4]; |
| int nr[4],kn; |
| BUF_MEM *buf; |
| EVP_MD_CTX md_ctx; |
| |
| EVP_MD_CTX_init(&md_ctx); |
| if (s->state == SSL3_ST_SW_KEY_EXCH_A) |
| { |
| alg_k=s->s3->tmp.new_cipher->algorithm_mkey; |
| alg_a=s->s3->tmp.new_cipher->algorithm_auth; |
| cert=s->cert; |
| |
| buf=s->init_buf; |
| |
| r[0]=r[1]=r[2]=r[3]=NULL; |
| n=0; |
| #ifndef OPENSSL_NO_PSK |
| if (alg_a & SSL_aPSK) |
| { |
| /* size for PSK identity hint */ |
| n+=2; |
| if (s->ctx->psk_identity_hint) |
| n+=strlen(s->ctx->psk_identity_hint); |
| } |
| #endif /* !OPENSSL_NO_PSK */ |
| #ifndef OPENSSL_NO_RSA |
| if (alg_k & SSL_kRSA) |
| { |
| rsa=cert->rsa_tmp; |
| if ((rsa == NULL) && (s->cert->rsa_tmp_cb != NULL)) |
| { |
| rsa=s->cert->rsa_tmp_cb(s, |
| SSL_C_IS_EXPORT(s->s3->tmp.new_cipher), |
| SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher)); |
| if(rsa == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_ERROR_GENERATING_TMP_RSA_KEY); |
| goto f_err; |
| } |
| RSA_up_ref(rsa); |
| cert->rsa_tmp=rsa; |
| } |
| if (rsa == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_MISSING_TMP_RSA_KEY); |
| goto f_err; |
| } |
| r[0]=rsa->n; |
| r[1]=rsa->e; |
| s->s3->tmp.use_rsa_tmp=1; |
| } |
| #endif |
| #ifndef OPENSSL_NO_DH |
| else if (alg_k & SSL_kEDH) |
| { |
| dhp=cert->dh_tmp; |
| if ((dhp == NULL) && (s->cert->dh_tmp_cb != NULL)) |
| dhp=s->cert->dh_tmp_cb(s, |
| SSL_C_IS_EXPORT(s->s3->tmp.new_cipher), |
| SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher)); |
| if (dhp == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_MISSING_TMP_DH_KEY); |
| goto f_err; |
| } |
| |
| if (s->s3->tmp.dh != NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| if ((dh=DHparams_dup(dhp)) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_DH_LIB); |
| goto err; |
| } |
| |
| s->s3->tmp.dh=dh; |
| if ((dhp->pub_key == NULL || |
| dhp->priv_key == NULL || |
| (s->options & SSL_OP_SINGLE_DH_USE))) |
| { |
| if(!DH_generate_key(dh)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_DH_LIB); |
| goto err; |
| } |
| } |
| else |
| { |
| dh->pub_key=BN_dup(dhp->pub_key); |
| dh->priv_key=BN_dup(dhp->priv_key); |
| if ((dh->pub_key == NULL) || |
| (dh->priv_key == NULL)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_DH_LIB); |
| goto err; |
| } |
| } |
| r[0]=dh->p; |
| r[1]=dh->g; |
| r[2]=dh->pub_key; |
| } |
| #endif |
| #ifndef OPENSSL_NO_ECDH |
| else if (alg_k & SSL_kEECDH) |
| { |
| const EC_GROUP *group; |
| |
| ecdhp=cert->ecdh_tmp; |
| if (s->cert->ecdh_tmp_auto) |
| { |
| /* Get NID of appropriate shared curve */ |
| int nid = tls1_shared_curve(s, -2); |
| if (nid != NID_undef) |
| ecdhp = EC_KEY_new_by_curve_name(nid); |
| } |
| else if ((ecdhp == NULL) && s->cert->ecdh_tmp_cb) |
| { |
| ecdhp=s->cert->ecdh_tmp_cb(s, |
| SSL_C_IS_EXPORT(s->s3->tmp.new_cipher), |
| SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher)); |
| } |
| if (ecdhp == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_MISSING_TMP_ECDH_KEY); |
| goto f_err; |
| } |
| |
| if (s->s3->tmp.ecdh != NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| /* Duplicate the ECDH structure. */ |
| if (ecdhp == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| if (s->cert->ecdh_tmp_auto) |
| ecdh = ecdhp; |
| else if ((ecdh = EC_KEY_dup(ecdhp)) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| |
| s->s3->tmp.ecdh=ecdh; |
| if ((EC_KEY_get0_public_key(ecdh) == NULL) || |
| (EC_KEY_get0_private_key(ecdh) == NULL) || |
| (s->options & SSL_OP_SINGLE_ECDH_USE)) |
| { |
| if(!EC_KEY_generate_key(ecdh)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| } |
| |
| if (((group = EC_KEY_get0_group(ecdh)) == NULL) || |
| (EC_KEY_get0_public_key(ecdh) == NULL) || |
| (EC_KEY_get0_private_key(ecdh) == NULL)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| |
| if (SSL_C_IS_EXPORT(s->s3->tmp.new_cipher) && |
| (EC_GROUP_get_degree(group) > 163)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER); |
| goto err; |
| } |
| |
| /* XXX: For now, we only support ephemeral ECDH |
| * keys over named (not generic) curves. For |
| * supported named curves, curve_id is non-zero. |
| */ |
| if ((curve_id = |
| tls1_ec_nid2curve_id(EC_GROUP_get_curve_name(group))) |
| == 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_UNSUPPORTED_ELLIPTIC_CURVE); |
| goto err; |
| } |
| |
| /* Encode the public key. |
| * First check the size of encoding and |
| * allocate memory accordingly. |
| */ |
| encodedlen = EC_POINT_point2oct(group, |
| EC_KEY_get0_public_key(ecdh), |
| POINT_CONVERSION_UNCOMPRESSED, |
| NULL, 0, NULL); |
| |
| encodedPoint = (unsigned char *) |
| OPENSSL_malloc(encodedlen*sizeof(unsigned char)); |
| bn_ctx = BN_CTX_new(); |
| if ((encodedPoint == NULL) || (bn_ctx == NULL)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| |
| encodedlen = EC_POINT_point2oct(group, |
| EC_KEY_get0_public_key(ecdh), |
| POINT_CONVERSION_UNCOMPRESSED, |
| encodedPoint, encodedlen, bn_ctx); |
| |
| if (encodedlen == 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| |
| BN_CTX_free(bn_ctx); bn_ctx=NULL; |
| |
| /* XXX: For now, we only support named (not |
| * generic) curves in ECDH ephemeral key exchanges. |
| * In this situation, we need four additional bytes |
| * to encode the entire ServerECDHParams |
| * structure. |
| */ |
| n += 4 + encodedlen; |
| |
| /* We'll generate the serverKeyExchange message |
| * explicitly so we can set these to NULLs |
| */ |
| r[0]=NULL; |
| r[1]=NULL; |
| r[2]=NULL; |
| r[3]=NULL; |
| } |
| #endif /* !OPENSSL_NO_ECDH */ |
| else if (!(alg_k & SSL_kPSK)) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE); |
| goto f_err; |
| } |
| for (i=0; i < 4 && r[i] != NULL; i++) |
| { |
| nr[i]=BN_num_bytes(r[i]); |
| n+=2+nr[i]; |
| } |
| |
| if (!(alg_a & SSL_aNULL) |
| /* Among PSK ciphersuites only RSA uses a certificate */ |
| && !((alg_a & SSL_aPSK) && !(alg_k & SSL_kRSA))) |
| { |
| if ((pkey=ssl_get_sign_pkey(s,s->s3->tmp.new_cipher,&md)) |
| == NULL) |
| { |
| al=SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| kn=EVP_PKEY_size(pkey); |
| } |
| else |
| { |
| pkey=NULL; |
| kn=0; |
| } |
| |
| if (!BUF_MEM_grow_clean(buf,n+SSL_HM_HEADER_LENGTH(s)+kn)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_LIB_BUF); |
| goto err; |
| } |
| d = p = ssl_handshake_start(s); |
| |
| for (i=0; i < 4 && r[i] != NULL; i++) |
| { |
| s2n(nr[i],p); |
| BN_bn2bin(r[i],p); |
| p+=nr[i]; |
| } |
| |
| /* Note: ECDHE PSK ciphersuites use SSL_kEECDH and SSL_aPSK. |
| * When one of them is used, the server key exchange record needs to have both |
| * the psk_identity_hint and the ServerECDHParams. */ |
| #ifndef OPENSSL_NO_PSK |
| if (alg_a & SSL_aPSK) |
| { |
| if (s->ctx->psk_identity_hint) |
| { |
| /* copy PSK identity hint */ |
| s2n(strlen(s->ctx->psk_identity_hint), p); |
| strncpy((char *)p, s->ctx->psk_identity_hint, strlen(s->ctx->psk_identity_hint)); |
| p+=strlen(s->ctx->psk_identity_hint); |
| } |
| else |
| { |
| /* No identity hint is provided. */ |
| *p = 0; |
| p += 1; |
| *p = 0; |
| p += 1; |
| } |
| } |
| #endif /* OPENSSL_NO_PSK */ |
| |
| #ifndef OPENSSL_NO_ECDH |
| if (alg_k & SSL_kEECDH) |
| { |
| /* XXX: For now, we only support named (not generic) curves. |
| * In this situation, the serverKeyExchange message has: |
| * [1 byte CurveType], [2 byte CurveName] |
| * [1 byte length of encoded point], followed by |
| * the actual encoded point itself |
| */ |
| *p = NAMED_CURVE_TYPE; |
| p += 1; |
| *p = 0; |
| p += 1; |
| *p = curve_id; |
| p += 1; |
| *p = encodedlen; |
| p += 1; |
| memcpy((unsigned char*)p, |
| (unsigned char *)encodedPoint, |
| encodedlen); |
| OPENSSL_free(encodedPoint); |
| encodedPoint = NULL; |
| p += encodedlen; |
| } |
| #endif /* OPENSSL_NO_ECDH */ |
| |
| /* not anonymous */ |
| if (pkey != NULL) |
| { |
| /* n is the length of the params, they start at &(d[4]) |
| * and p points to the space at the end. */ |
| #ifndef OPENSSL_NO_RSA |
| if (pkey->type == EVP_PKEY_RSA && !SSL_USE_SIGALGS(s)) |
| { |
| q=md_buf; |
| j=0; |
| for (num=2; num > 0; num--) |
| { |
| EVP_DigestInit_ex(&md_ctx,(num == 2) |
| ?s->ctx->md5:s->ctx->sha1, NULL); |
| EVP_DigestUpdate(&md_ctx,&(s->s3->client_random[0]),SSL3_RANDOM_SIZE); |
| EVP_DigestUpdate(&md_ctx,&(s->s3->server_random[0]),SSL3_RANDOM_SIZE); |
| EVP_DigestUpdate(&md_ctx,d,n); |
| EVP_DigestFinal_ex(&md_ctx,q, |
| (unsigned int *)&i); |
| q+=i; |
| j+=i; |
| } |
| if (RSA_sign(NID_md5_sha1, md_buf, j, |
| &(p[2]), &u, pkey->pkey.rsa) <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_LIB_RSA); |
| goto err; |
| } |
| s2n(u,p); |
| n+=u+2; |
| } |
| else |
| #endif /* OPENSSL_NO_RSA */ |
| if (md) |
| { |
| /* send signature algorithm */ |
| if (SSL_USE_SIGALGS(s)) |
| { |
| if (!tls12_get_sigandhash(p, pkey, md)) |
| { |
| /* Should never happen */ |
| al=SSL_AD_INTERNAL_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_R_INTERNAL_ERROR); |
| goto f_err; |
| } |
| p+=2; |
| } |
| #ifdef SSL_DEBUG |
| fprintf(stderr, "Using hash %s\n", |
| EVP_MD_name(md)); |
| #endif |
| EVP_SignInit_ex(&md_ctx, md, NULL); |
| EVP_SignUpdate(&md_ctx,&(s->s3->client_random[0]),SSL3_RANDOM_SIZE); |
| EVP_SignUpdate(&md_ctx,&(s->s3->server_random[0]),SSL3_RANDOM_SIZE); |
| EVP_SignUpdate(&md_ctx,d,n); |
| if (!EVP_SignFinal(&md_ctx,&(p[2]), |
| (unsigned int *)&i,pkey)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, ERR_LIB_EVP); |
| goto err; |
| } |
| s2n(i,p); |
| n+=i+2; |
| if (SSL_USE_SIGALGS(s)) |
| n+= 2; |
| } |
| else |
| { |
| /* Is this error check actually needed? */ |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_server_key_exchange, SSL_R_UNKNOWN_PKEY_TYPE); |
| goto f_err; |
| } |
| } |
| |
| ssl_set_handshake_header(s, SSL3_MT_SERVER_KEY_EXCHANGE, n); |
| } |
| |
| s->state = SSL3_ST_SW_KEY_EXCH_B; |
| EVP_MD_CTX_cleanup(&md_ctx); |
| return ssl_do_write(s); |
| f_err: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| err: |
| #ifndef OPENSSL_NO_ECDH |
| if (encodedPoint != NULL) OPENSSL_free(encodedPoint); |
| BN_CTX_free(bn_ctx); |
| #endif |
| EVP_MD_CTX_cleanup(&md_ctx); |
| return(-1); |
| } |
| |
| int ssl3_send_certificate_request(SSL *s) |
| { |
| unsigned char *p,*d; |
| int i,j,nl,off,n; |
| STACK_OF(X509_NAME) *sk=NULL; |
| X509_NAME *name; |
| BUF_MEM *buf; |
| |
| if (s->state == SSL3_ST_SW_CERT_REQ_A) |
| { |
| buf=s->init_buf; |
| |
| d=p=ssl_handshake_start(s); |
| |
| /* get the list of acceptable cert types */ |
| p++; |
| n=ssl3_get_req_cert_type(s,p); |
| d[0]=n; |
| p+=n; |
| n++; |
| |
| if (SSL_USE_SIGALGS(s)) |
| { |
| const unsigned char *psigs; |
| nl = tls12_get_psigalgs(s, &psigs); |
| s2n(nl, p); |
| memcpy(p, psigs, nl); |
| p += nl; |
| n += nl + 2; |
| } |
| |
| off=n; |
| p+=2; |
| n+=2; |
| |
| sk=SSL_get_client_CA_list(s); |
| nl=0; |
| if (sk != NULL) |
| { |
| for (i=0; i<sk_X509_NAME_num(sk); i++) |
| { |
| name=sk_X509_NAME_value(sk,i); |
| j=i2d_X509_NAME(name,NULL); |
| if (!BUF_MEM_grow_clean(buf,SSL_HM_HEADER_LENGTH(s)+n+j+2)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_send_certificate_request, ERR_R_BUF_LIB); |
| goto err; |
| } |
| p = ssl_handshake_start(s) + n; |
| if (!(s->options & SSL_OP_NETSCAPE_CA_DN_BUG)) |
| { |
| s2n(j,p); |
| i2d_X509_NAME(name,&p); |
| n+=2+j; |
| nl+=2+j; |
| } |
| else |
| { |
| d=p; |
| i2d_X509_NAME(name,&p); |
| j-=2; s2n(j,d); j+=2; |
| n+=j; |
| nl+=j; |
| } |
| } |
| } |
| /* else no CA names */ |
| p = ssl_handshake_start(s) + off; |
| s2n(nl,p); |
| |
| ssl_set_handshake_header(s, SSL3_MT_CERTIFICATE_REQUEST, n); |
| |
| #ifdef NETSCAPE_HANG_BUG |
| if (!SSL_IS_DTLS(s)) |
| { |
| p=(unsigned char *)s->init_buf->data + s->init_num; |
| /* do the header */ |
| *(p++)=SSL3_MT_SERVER_DONE; |
| *(p++)=0; |
| *(p++)=0; |
| *(p++)=0; |
| s->init_num += 4; |
| } |
| #endif |
| |
| s->state = SSL3_ST_SW_CERT_REQ_B; |
| } |
| |
| /* SSL3_ST_SW_CERT_REQ_B */ |
| return ssl_do_write(s); |
| err: |
| return(-1); |
| } |
| |
| int ssl3_get_client_key_exchange(SSL *s) |
| { |
| int i,al,ok; |
| long n; |
| unsigned long alg_k; |
| unsigned long alg_a; |
| unsigned char *p; |
| #ifndef OPENSSL_NO_RSA |
| RSA *rsa=NULL; |
| EVP_PKEY *pkey=NULL; |
| #endif |
| #ifndef OPENSSL_NO_DH |
| BIGNUM *pub=NULL; |
| DH *dh_srvr, *dh_clnt = NULL; |
| #endif |
| |
| #ifndef OPENSSL_NO_ECDH |
| EC_KEY *srvr_ecdh = NULL; |
| EVP_PKEY *clnt_pub_pkey = NULL; |
| EC_POINT *clnt_ecpoint = NULL; |
| BN_CTX *bn_ctx = NULL; |
| #ifndef OPENSSL_NO_PSK |
| unsigned int psk_len = 0; |
| unsigned char psk[PSK_MAX_PSK_LEN]; |
| #endif /* OPENSSL_NO_PSK */ |
| #endif |
| |
| n=s->method->ssl_get_message(s, |
| SSL3_ST_SR_KEY_EXCH_A, |
| SSL3_ST_SR_KEY_EXCH_B, |
| SSL3_MT_CLIENT_KEY_EXCHANGE, |
| 2048, /* ??? */ |
| &ok); |
| |
| if (!ok) return((int)n); |
| p=(unsigned char *)s->init_msg; |
| |
| alg_k=s->s3->tmp.new_cipher->algorithm_mkey; |
| alg_a=s->s3->tmp.new_cipher->algorithm_auth; |
| |
| #ifndef OPENSSL_NO_PSK |
| if (alg_a & SSL_aPSK) |
| { |
| unsigned char *t = NULL; |
| unsigned char pre_ms[PSK_MAX_PSK_LEN*2+4]; |
| unsigned int pre_ms_len = 0; |
| int psk_err = 1; |
| char tmp_id[PSK_MAX_IDENTITY_LEN+1]; |
| |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| |
| n2s(p, i); |
| if (n != i+2 && !(alg_k & SSL_kEECDH)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_LENGTH_MISMATCH); |
| goto psk_err; |
| } |
| if (i > PSK_MAX_IDENTITY_LEN) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_DATA_LENGTH_TOO_LONG); |
| goto psk_err; |
| } |
| if (s->psk_server_callback == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_PSK_NO_SERVER_CB); |
| goto psk_err; |
| } |
| |
| /* Create guaranteed NUL-terminated identity |
| * string for the callback */ |
| memcpy(tmp_id, p, i); |
| memset(tmp_id+i, 0, PSK_MAX_IDENTITY_LEN+1-i); |
| psk_len = s->psk_server_callback(s, tmp_id, psk, sizeof(psk)); |
| |
| if (psk_len > PSK_MAX_PSK_LEN) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_INTERNAL_ERROR); |
| goto psk_err; |
| } |
| else if (psk_len == 0) |
| { |
| /* PSK related to the given identity not found */ |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_PSK_IDENTITY_NOT_FOUND); |
| al=SSL_AD_UNKNOWN_PSK_IDENTITY; |
| goto psk_err; |
| } |
| if (!(alg_k & SSL_kEECDH)) |
| { |
| /* Create the shared secret now if we're not using ECDHE-PSK.*/ |
| pre_ms_len=2+psk_len+2+psk_len; |
| t = pre_ms; |
| s2n(psk_len, t); |
| memset(t, 0, psk_len); |
| t+=psk_len; |
| s2n(psk_len, t); |
| memcpy(t, psk, psk_len); |
| |
| s->session->master_key_length= |
| s->method->ssl3_enc->generate_master_secret(s, |
| s->session->master_key, pre_ms, pre_ms_len); |
| } |
| if (s->session->psk_identity != NULL) |
| OPENSSL_free(s->session->psk_identity); |
| s->session->psk_identity = BUF_strdup(tmp_id); |
| OPENSSL_cleanse(tmp_id, PSK_MAX_IDENTITY_LEN+1); |
| if (s->session->psk_identity == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto psk_err; |
| } |
| |
| if (s->session->psk_identity_hint != NULL) |
| OPENSSL_free(s->session->psk_identity_hint); |
| s->session->psk_identity_hint = BUF_strdup(s->ctx->psk_identity_hint); |
| if (s->ctx->psk_identity_hint != NULL && |
| s->session->psk_identity_hint == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto psk_err; |
| } |
| |
| p += i; |
| n -= (i + 2); |
| psk_err = 0; |
| psk_err: |
| OPENSSL_cleanse(pre_ms, sizeof(pre_ms)); |
| if (psk_err != 0) |
| goto f_err; |
| } |
| #endif /* OPENSSL_NO_PSK */ |
| |
| if (0) {} |
| #ifndef OPENSSL_NO_RSA |
| else if (alg_k & SSL_kRSA) |
| { |
| unsigned char rand_premaster_secret[SSL_MAX_MASTER_KEY_LENGTH]; |
| int decrypt_len, decrypt_good_mask; |
| unsigned char version_good; |
| size_t j; |
| |
| /* FIX THIS UP EAY EAY EAY EAY */ |
| if (s->s3->tmp.use_rsa_tmp) |
| { |
| if ((s->cert != NULL) && (s->cert->rsa_tmp != NULL)) |
| rsa=s->cert->rsa_tmp; |
| /* Don't do a callback because rsa_tmp should |
| * be sent already */ |
| if (rsa == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_MISSING_TMP_RSA_PKEY); |
| goto f_err; |
| |
| } |
| } |
| else |
| { |
| pkey=s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey; |
| if ( (pkey == NULL) || |
| (pkey->type != EVP_PKEY_RSA) || |
| (pkey->pkey.rsa == NULL)) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_MISSING_RSA_CERTIFICATE); |
| goto f_err; |
| } |
| rsa=pkey->pkey.rsa; |
| } |
| |
| /* TLS and [incidentally] DTLS{0xFEFF} */ |
| if (s->version > SSL3_VERSION && s->version != DTLS1_BAD_VER) |
| { |
| n2s(p,i); |
| if (n != i+2) |
| { |
| if (!(s->options & SSL_OP_TLS_D5_BUG)) |
| { |
| al = SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG); |
| goto f_err; |
| } |
| else |
| p-=2; |
| } |
| else |
| n=i; |
| } |
| |
| /* Reject overly short RSA ciphertext because we want to be |
| * sure that the buffer size makes it safe to iterate over the |
| * entire size of a premaster secret |
| * (SSL_MAX_MASTER_KEY_LENGTH). The actual expected size is |
| * larger due to RSA padding, but the bound is sufficient to be |
| * safe. */ |
| if (n < SSL_MAX_MASTER_KEY_LENGTH) |
| { |
| al = SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_DECRYPTION_FAILED); |
| goto f_err; |
| } |
| |
| /* We must not leak whether a decryption failure occurs because |
| * of Bleichenbacher's attack on PKCS #1 v1.5 RSA padding (see |
| * RFC 2246, section 7.4.7.1). The code follows that advice of |
| * the TLS RFC and generates a random premaster secret for the |
| * case that the decrypt fails. See |
| * https://tools.ietf.org/html/rfc5246#section-7.4.7.1 */ |
| if (RAND_pseudo_bytes(rand_premaster_secret, |
| sizeof(rand_premaster_secret)) <= 0) |
| goto err; |
| |
| decrypt_len = RSA_private_decrypt((int)n,p,p,rsa,RSA_PKCS1_PADDING); |
| ERR_clear_error(); |
| |
| /* decrypt_len should be SSL_MAX_MASTER_KEY_LENGTH. |
| * decrypt_good_mask will be zero if so and non-zero otherwise. */ |
| decrypt_good_mask = decrypt_len ^ SSL_MAX_MASTER_KEY_LENGTH; |
| |
| /* If the version in the decrypted pre-master secret is correct |
| * then version_good will be zero. The Klima-Pokorny-Rosa |
| * extension of Bleichenbacher's attack |
| * (http://eprint.iacr.org/2003/052/) exploits the version |
| * number check as a "bad version oracle". Thus version checks |
| * are done in constant time and are treated like any other |
| * decryption error. */ |
| version_good = p[0] ^ (s->client_version>>8); |
| version_good |= p[1] ^ (s->client_version&0xff); |
| |
| /* The premaster secret must contain the same version number as |
| * the ClientHello to detect version rollback attacks |
| * (strangely, the protocol does not offer such protection for |
| * DH ciphersuites). However, buggy clients exist that send the |
| * negotiated protocol version instead if the server does not |
| * support the requested protocol version. If |
| * SSL_OP_TLS_ROLLBACK_BUG is set, tolerate such clients. */ |
| if (s->options & SSL_OP_TLS_ROLLBACK_BUG) |
| { |
| unsigned char workaround_mask = version_good; |
| unsigned char workaround; |
| |
| /* workaround_mask will be 0xff if version_good is |
| * non-zero (i.e. the version match failed). Otherwise |
| * it'll be 0x00. */ |
| workaround_mask |= workaround_mask >> 4; |
| workaround_mask |= workaround_mask >> 2; |
| workaround_mask |= workaround_mask >> 1; |
| workaround_mask = ~((workaround_mask & 1) - 1); |
| |
| workaround = p[0] ^ (s->version>>8); |
| workaround |= p[1] ^ (s->version&0xff); |
| |
| /* If workaround_mask is 0xff (i.e. there was a version |
| * mismatch) then we copy the value of workaround over |
| * version_good. */ |
| version_good = (workaround & workaround_mask) | |
| (version_good & ~workaround_mask); |
| } |
| |
| /* If any bits in version_good are set then they'll poision |
| * decrypt_good_mask and cause rand_premaster_secret to be |
| * used. */ |
| decrypt_good_mask |= version_good; |
| |
| /* decrypt_good_mask will be zero iff decrypt_len == |
| * SSL_MAX_MASTER_KEY_LENGTH and the version check passed. We |
| * fold the bottom 32 bits of it with an OR so that the LSB |
| * will be zero iff everything is good. This assumes that we'll |
| * never decrypt a value > 2**31 bytes, which seems safe. */ |
| decrypt_good_mask |= decrypt_good_mask >> 16; |
| decrypt_good_mask |= decrypt_good_mask >> 8; |
| decrypt_good_mask |= decrypt_good_mask >> 4; |
| decrypt_good_mask |= decrypt_good_mask >> 2; |
| decrypt_good_mask |= decrypt_good_mask >> 1; |
| /* Now select only the LSB and subtract one. If decrypt_len == |
| * SSL_MAX_MASTER_KEY_LENGTH and the version check passed then |
| * decrypt_good_mask will be all ones. Otherwise it'll be all |
| * zeros. */ |
| decrypt_good_mask &= 1; |
| decrypt_good_mask--; |
| |
| /* Now copy rand_premaster_secret over p using |
| * decrypt_good_mask. */ |
| for (j = 0; j < sizeof(rand_premaster_secret); j++) |
| { |
| p[j] = (p[j] & decrypt_good_mask) | |
| (rand_premaster_secret[j] & ~decrypt_good_mask); |
| } |
| |
| s->session->master_key_length= |
| s->method->ssl3_enc->generate_master_secret(s, |
| s->session->master_key, |
| p,sizeof(rand_premaster_secret)); |
| OPENSSL_cleanse(p,sizeof(rand_premaster_secret)); |
| } |
| #endif |
| #ifndef OPENSSL_NO_DH |
| else if (alg_k & (SSL_kEDH|SSL_kDHr|SSL_kDHd)) |
| { |
| int idx = -1; |
| EVP_PKEY *skey = NULL; |
| if (n) |
| n2s(p,i); |
| else |
| i = 0; |
| if (n && n != i+2) |
| { |
| if (!(s->options & SSL_OP_SSLEAY_080_CLIENT_DH_BUG)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG); |
| goto err; |
| } |
| else |
| { |
| p-=2; |
| i=(int)n; |
| } |
| } |
| if (alg_k & SSL_kDHr) |
| idx = SSL_PKEY_DH_RSA; |
| else if (alg_k & SSL_kDHd) |
| idx = SSL_PKEY_DH_DSA; |
| if (idx >= 0) |
| { |
| skey = s->cert->pkeys[idx].privatekey; |
| if ((skey == NULL) || |
| (skey->type != EVP_PKEY_DH) || |
| (skey->pkey.dh == NULL)) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_MISSING_RSA_CERTIFICATE); |
| goto f_err; |
| } |
| dh_srvr = skey->pkey.dh; |
| } |
| else if (s->s3->tmp.dh == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_MISSING_TMP_DH_KEY); |
| goto f_err; |
| } |
| else |
| dh_srvr=s->s3->tmp.dh; |
| |
| if (n == 0L) |
| { |
| /* Get pubkey from cert */ |
| EVP_PKEY *clkey=X509_get_pubkey(s->session->peer); |
| if (clkey) |
| { |
| if (EVP_PKEY_cmp_parameters(clkey, skey) == 1) |
| dh_clnt = EVP_PKEY_get1_DH(clkey); |
| } |
| if (dh_clnt == NULL) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_MISSING_TMP_DH_KEY); |
| goto f_err; |
| } |
| EVP_PKEY_free(clkey); |
| pub = dh_clnt->pub_key; |
| } |
| else |
| pub=BN_bin2bn(p,i,NULL); |
| if (pub == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_BN_LIB); |
| goto err; |
| } |
| |
| i=DH_compute_key(p,pub,dh_srvr); |
| |
| if (i <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_DH_LIB); |
| BN_clear_free(pub); |
| goto err; |
| } |
| |
| DH_free(s->s3->tmp.dh); |
| s->s3->tmp.dh=NULL; |
| if (dh_clnt) |
| DH_free(dh_clnt); |
| else |
| BN_clear_free(pub); |
| pub=NULL; |
| s->session->master_key_length= |
| s->method->ssl3_enc->generate_master_secret(s, |
| s->session->master_key,p,i); |
| OPENSSL_cleanse(p,i); |
| if (dh_clnt) |
| return 2; |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_ECDH |
| else if (alg_k & (SSL_kEECDH|SSL_kECDHr|SSL_kECDHe)) |
| { |
| int ret = 1; |
| int field_size = 0; |
| const EC_KEY *tkey; |
| const EC_GROUP *group; |
| const BIGNUM *priv_key; |
| #ifndef OPENSSL_NO_PSK |
| unsigned char *pre_ms; |
| unsigned int pre_ms_len; |
| unsigned char *t; |
| #endif /* OPENSSL_NO_PSK */ |
| |
| /* initialize structures for server's ECDH key pair */ |
| if ((srvr_ecdh = EC_KEY_new()) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| /* Let's get server private key and group information */ |
| if (alg_k & (SSL_kECDHr|SSL_kECDHe)) |
| { |
| /* use the certificate */ |
| tkey = s->cert->pkeys[SSL_PKEY_ECC].privatekey->pkey.ec; |
| } |
| else |
| { |
| /* use the ephermeral values we saved when |
| * generating the ServerKeyExchange msg. |
| */ |
| tkey = s->s3->tmp.ecdh; |
| } |
| |
| group = EC_KEY_get0_group(tkey); |
| priv_key = EC_KEY_get0_private_key(tkey); |
| |
| if (!EC_KEY_set_group(srvr_ecdh, group) || |
| !EC_KEY_set_private_key(srvr_ecdh, priv_key)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_EC_LIB); |
| goto err; |
| } |
| |
| /* Let's get client's public key */ |
| if ((clnt_ecpoint = EC_POINT_new(group)) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| if (n == 0L) |
| { |
| /* Client Publickey was in Client Certificate */ |
| |
| if (alg_k & SSL_kEECDH) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_MISSING_TMP_ECDH_KEY); |
| goto f_err; |
| } |
| if (((clnt_pub_pkey=X509_get_pubkey(s->session->peer)) |
| == NULL) || |
| (clnt_pub_pkey->type != EVP_PKEY_EC)) |
| { |
| /* XXX: For now, we do not support client |
| * authentication using ECDH certificates |
| * so this branch (n == 0L) of the code is |
| * never executed. When that support is |
| * added, we ought to ensure the key |
| * received in the certificate is |
| * authorized for key agreement. |
| * ECDH_compute_key implicitly checks that |
| * the two ECDH shares are for the same |
| * group. |
| */ |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_UNABLE_TO_DECODE_ECDH_CERTS); |
| goto f_err; |
| } |
| |
| if (EC_POINT_copy(clnt_ecpoint, |
| EC_KEY_get0_public_key(clnt_pub_pkey->pkey.ec)) == 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_EC_LIB); |
| goto err; |
| } |
| ret = 2; /* Skip certificate verify processing */ |
| } |
| else |
| { |
| /* Get client's public key from encoded point |
| * in the ClientKeyExchange message. |
| */ |
| if ((bn_ctx = BN_CTX_new()) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| /* Get encoded point length */ |
| i = *p; |
| p += 1; |
| if (n != 1 + i) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_EC_LIB); |
| goto err; |
| } |
| if (EC_POINT_oct2point(group, |
| clnt_ecpoint, p, i, bn_ctx) == 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_EC_LIB); |
| goto err; |
| } |
| /* p is pointing to somewhere in the buffer |
| * currently, so set it to the start |
| */ |
| p=(unsigned char *)s->init_buf->data; |
| } |
| |
| /* Compute the shared pre-master secret */ |
| field_size = EC_GROUP_get_degree(group); |
| if (field_size <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| i = ECDH_compute_key(p, (field_size+7)/8, clnt_ecpoint, srvr_ecdh, NULL); |
| if (i <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_ECDH_LIB); |
| goto err; |
| } |
| |
| EVP_PKEY_free(clnt_pub_pkey); |
| EC_POINT_free(clnt_ecpoint); |
| EC_KEY_free(srvr_ecdh); |
| BN_CTX_free(bn_ctx); |
| EC_KEY_free(s->s3->tmp.ecdh); |
| s->s3->tmp.ecdh = NULL; |
| |
| #ifndef OPENSSL_NO_PSK |
| /* ECDHE PSK ciphersuites from RFC 5489 */ |
| if ((alg_a & SSL_aPSK) && psk_len != 0) |
| { |
| pre_ms_len = 2+psk_len+2+i; |
| pre_ms = OPENSSL_malloc(pre_ms_len); |
| if (pre_ms == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| memset(pre_ms, 0, pre_ms_len); |
| t = pre_ms; |
| s2n(psk_len, t); |
| memcpy(t, psk, psk_len); |
| t += psk_len; |
| s2n(i, t); |
| memcpy(t, p, i); |
| s->session->master_key_length = s->method->ssl3_enc \ |
| -> generate_master_secret(s, |
| s->session->master_key, pre_ms, pre_ms_len); |
| OPENSSL_cleanse(pre_ms, pre_ms_len); |
| OPENSSL_free(pre_ms); |
| } |
| #endif /* OPENSSL_NO_PSK */ |
| if (!(alg_a & SSL_aPSK)) |
| { |
| /* Compute the master secret */ |
| s->session->master_key_length = s->method->ssl3_enc \ |
| -> generate_master_secret(s, |
| s->session->master_key, p, i); |
| } |
| |
| OPENSSL_cleanse(p, i); |
| return ret; |
| } |
| #endif |
| else if (alg_k & SSL_kGOST) |
| { |
| int ret = 0; |
| EVP_PKEY_CTX *pkey_ctx; |
| EVP_PKEY *client_pub_pkey = NULL, *pk = NULL; |
| unsigned char premaster_secret[32], *start; |
| size_t outlen=32, inlen; |
| unsigned long alg_a; |
| |
| /* Get our certificate private key*/ |
| alg_a = s->s3->tmp.new_cipher->algorithm_auth; |
| if (alg_a & SSL_aGOST94) |
| pk = s->cert->pkeys[SSL_PKEY_GOST94].privatekey; |
| else if (alg_a & SSL_aGOST01) |
| pk = s->cert->pkeys[SSL_PKEY_GOST01].privatekey; |
| |
| pkey_ctx = EVP_PKEY_CTX_new(pk,NULL); |
| EVP_PKEY_decrypt_init(pkey_ctx); |
| /* If client certificate is present and is of the same type, maybe |
| * use it for key exchange. Don't mind errors from |
| * EVP_PKEY_derive_set_peer, because it is completely valid to use |
| * a client certificate for authorization only. */ |
| client_pub_pkey = X509_get_pubkey(s->session->peer); |
| if (client_pub_pkey) |
| { |
| if (EVP_PKEY_derive_set_peer(pkey_ctx, client_pub_pkey) <= 0) |
| ERR_clear_error(); |
| } |
| /* Decrypt session key */ |
| if ((*p!=( V_ASN1_SEQUENCE| V_ASN1_CONSTRUCTED))) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_DECRYPTION_FAILED); |
| goto gerr; |
| } |
| if (p[1] == 0x81) |
| { |
| start = p+3; |
| inlen = p[2]; |
| } |
| else if (p[1] < 0x80) |
| { |
| start = p+2; |
| inlen = p[1]; |
| } |
| else |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_DECRYPTION_FAILED); |
| goto gerr; |
| } |
| if (EVP_PKEY_decrypt(pkey_ctx,premaster_secret,&outlen,start,inlen) <=0) |
| |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_DECRYPTION_FAILED); |
| goto gerr; |
| } |
| /* Generate master secret */ |
| s->session->master_key_length= |
| s->method->ssl3_enc->generate_master_secret(s, |
| s->session->master_key,premaster_secret,32); |
| /* Check if pubkey from client certificate was used */ |
| if (EVP_PKEY_CTX_ctrl(pkey_ctx, -1, -1, EVP_PKEY_CTRL_PEER_KEY, 2, NULL) > 0) |
| ret = 2; |
| else |
| ret = 1; |
| gerr: |
| EVP_PKEY_free(client_pub_pkey); |
| EVP_PKEY_CTX_free(pkey_ctx); |
| if (ret) |
| return ret; |
| else |
| goto err; |
| } |
| else if (!(alg_k & SSL_kPSK)) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_key_exchange, SSL_R_UNKNOWN_CIPHER_TYPE); |
| goto f_err; |
| } |
| |
| return(1); |
| f_err: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| #if !defined(OPENSSL_NO_DH) || !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_ECDH) |
| err: |
| #endif |
| #ifndef OPENSSL_NO_ECDH |
| EVP_PKEY_free(clnt_pub_pkey); |
| EC_POINT_free(clnt_ecpoint); |
| if (srvr_ecdh != NULL) |
| EC_KEY_free(srvr_ecdh); |
| BN_CTX_free(bn_ctx); |
| #endif |
| return(-1); |
| } |
| |
| int ssl3_get_cert_verify(SSL *s) |
| { |
| EVP_PKEY *pkey=NULL; |
| unsigned char *p; |
| int al,ok,ret=0; |
| long n; |
| int type=0,i,j; |
| X509 *peer; |
| const EVP_MD *md = NULL; |
| EVP_MD_CTX mctx; |
| EVP_MD_CTX_init(&mctx); |
| |
| n=s->method->ssl_get_message(s, |
| SSL3_ST_SR_CERT_VRFY_A, |
| SSL3_ST_SR_CERT_VRFY_B, |
| -1, |
| 516, /* Enough for 4096 bit RSA key with TLS v1.2 */ |
| &ok); |
| |
| if (!ok) return((int)n); |
| |
| if (s->session->peer != NULL) |
| { |
| peer=s->session->peer; |
| pkey=X509_get_pubkey(peer); |
| type=X509_certificate_type(peer,pkey); |
| } |
| else |
| { |
| peer=NULL; |
| pkey=NULL; |
| } |
| |
| if (s->s3->tmp.message_type != SSL3_MT_CERTIFICATE_VERIFY) |
| { |
| s->s3->tmp.reuse_message=1; |
| if ((peer != NULL) && (type & EVP_PKT_SIGN)) |
| { |
| al=SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_MISSING_VERIFY_MESSAGE); |
| goto f_err; |
| } |
| ret=1; |
| goto end; |
| } |
| |
| if (peer == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_NO_CLIENT_CERT_RECEIVED); |
| al=SSL_AD_UNEXPECTED_MESSAGE; |
| goto f_err; |
| } |
| |
| if (!(type & EVP_PKT_SIGN)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE); |
| al=SSL_AD_ILLEGAL_PARAMETER; |
| goto f_err; |
| } |
| |
| if (s->s3->change_cipher_spec) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_CCS_RECEIVED_EARLY); |
| al=SSL_AD_UNEXPECTED_MESSAGE; |
| goto f_err; |
| } |
| |
| /* we now have a signature that we need to verify */ |
| p=(unsigned char *)s->init_msg; |
| /* Check for broken implementations of GOST ciphersuites */ |
| /* If key is GOST and n is exactly 64, it is bare |
| * signature without length field */ |
| if (n==64 && (pkey->type==NID_id_GostR3410_94 || |
| pkey->type == NID_id_GostR3410_2001) ) |
| { |
| i=64; |
| } |
| else |
| { |
| if (SSL_USE_SIGALGS(s)) |
| { |
| int rv = tls12_check_peer_sigalg(&md, s, p, pkey); |
| if (rv == -1) |
| { |
| al = SSL_AD_INTERNAL_ERROR; |
| goto f_err; |
| } |
| else if (rv == 0) |
| { |
| al = SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| #ifdef SSL_DEBUG |
| fprintf(stderr, "USING TLSv1.2 HASH %s\n", EVP_MD_name(md)); |
| #endif |
| p += 2; |
| n -= 2; |
| } |
| n2s(p,i); |
| n-=2; |
| if (i > n) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_LENGTH_MISMATCH); |
| al=SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| } |
| j=EVP_PKEY_size(pkey); |
| if ((i > j) || (n > j) || (n <= 0)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_WRONG_SIGNATURE_SIZE); |
| al=SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| |
| if (SSL_USE_SIGALGS(s)) |
| { |
| long hdatalen = 0; |
| char *hdata; |
| hdatalen = BIO_get_mem_data(s->s3->handshake_buffer, &hdata); |
| if (hdatalen <= 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, ERR_R_INTERNAL_ERROR); |
| al=SSL_AD_INTERNAL_ERROR; |
| goto f_err; |
| } |
| #ifdef SSL_DEBUG |
| fprintf(stderr, "Using TLS 1.2 with client verify alg %s\n", |
| EVP_MD_name(md)); |
| #endif |
| if (!EVP_VerifyInit_ex(&mctx, md, NULL) |
| || !EVP_VerifyUpdate(&mctx, hdata, hdatalen)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, ERR_R_EVP_LIB); |
| al=SSL_AD_INTERNAL_ERROR; |
| goto f_err; |
| } |
| |
| if (EVP_VerifyFinal(&mctx, p , i, pkey) <= 0) |
| { |
| al=SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_BAD_SIGNATURE); |
| goto f_err; |
| } |
| } |
| else |
| #ifndef OPENSSL_NO_RSA |
| if (pkey->type == EVP_PKEY_RSA) |
| { |
| i=RSA_verify(NID_md5_sha1, s->s3->tmp.cert_verify_md, |
| MD5_DIGEST_LENGTH+SHA_DIGEST_LENGTH, p, i, |
| pkey->pkey.rsa); |
| if (i < 0) |
| { |
| al=SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_BAD_RSA_DECRYPT); |
| goto f_err; |
| } |
| if (i == 0) |
| { |
| al=SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_BAD_RSA_SIGNATURE); |
| goto f_err; |
| } |
| } |
| else |
| #endif |
| #ifndef OPENSSL_NO_DSA |
| if (pkey->type == EVP_PKEY_DSA) |
| { |
| j=DSA_verify(pkey->save_type, |
| &(s->s3->tmp.cert_verify_md[MD5_DIGEST_LENGTH]), |
| SHA_DIGEST_LENGTH,p,i,pkey->pkey.dsa); |
| if (j <= 0) |
| { |
| /* bad signature */ |
| al=SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_BAD_DSA_SIGNATURE); |
| goto f_err; |
| } |
| } |
| else |
| #endif |
| #ifndef OPENSSL_NO_ECDSA |
| if (pkey->type == EVP_PKEY_EC) |
| { |
| j=ECDSA_verify(pkey->save_type, |
| &(s->s3->tmp.cert_verify_md[MD5_DIGEST_LENGTH]), |
| SHA_DIGEST_LENGTH,p,i,pkey->pkey.ec); |
| if (j <= 0) |
| { |
| /* bad signature */ |
| al=SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_BAD_ECDSA_SIGNATURE); |
| goto f_err; |
| } |
| } |
| else |
| #endif |
| if (pkey->type == NID_id_GostR3410_94 || pkey->type == NID_id_GostR3410_2001) |
| { unsigned char signature[64]; |
| int idx; |
| EVP_PKEY_CTX *pctx = EVP_PKEY_CTX_new(pkey,NULL); |
| EVP_PKEY_verify_init(pctx); |
| if (i!=64) { |
| fprintf(stderr,"GOST signature length is %d",i); |
| } |
| for (idx=0;idx<64;idx++) { |
| signature[63-idx]=p[idx]; |
| } |
| j=EVP_PKEY_verify(pctx,signature,64,s->s3->tmp.cert_verify_md,32); |
| EVP_PKEY_CTX_free(pctx); |
| if (j<=0) |
| { |
| al=SSL_AD_DECRYPT_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, SSL_R_BAD_ECDSA_SIGNATURE); |
| goto f_err; |
| } |
| } |
| else |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_cert_verify, ERR_R_INTERNAL_ERROR); |
| al=SSL_AD_UNSUPPORTED_CERTIFICATE; |
| goto f_err; |
| } |
| |
| |
| ret=1; |
| if (0) |
| { |
| f_err: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| } |
| end: |
| if (s->s3->handshake_buffer) |
| { |
| BIO_free(s->s3->handshake_buffer); |
| s->s3->handshake_buffer = NULL; |
| s->s3->flags &= ~TLS1_FLAGS_KEEP_HANDSHAKE; |
| } |
| EVP_MD_CTX_cleanup(&mctx); |
| EVP_PKEY_free(pkey); |
| return(ret); |
| } |
| |
| int ssl3_get_client_certificate(SSL *s) |
| { |
| int i,ok,al,ret= -1; |
| X509 *x=NULL; |
| unsigned long l,nc,llen,n; |
| const unsigned char *p,*q; |
| unsigned char *d; |
| STACK_OF(X509) *sk=NULL; |
| SHA256_CTX sha256; |
| |
| n=s->method->ssl_get_message(s, |
| SSL3_ST_SR_CERT_A, |
| SSL3_ST_SR_CERT_B, |
| -1, |
| s->max_cert_list, |
| &ok); |
| |
| if (!ok) return((int)n); |
| |
| if (s->s3->tmp.message_type == SSL3_MT_CLIENT_KEY_EXCHANGE) |
| { |
| if ( (s->verify_mode & SSL_VERIFY_PEER) && |
| (s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE); |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| goto f_err; |
| } |
| /* If tls asked for a client cert, the client must return a 0 list */ |
| if ((s->version > SSL3_VERSION) && s->s3->tmp.cert_request) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST); |
| al=SSL_AD_UNEXPECTED_MESSAGE; |
| goto f_err; |
| } |
| s->s3->tmp.reuse_message=1; |
| return(1); |
| } |
| |
| if (s->s3->tmp.message_type != SSL3_MT_CERTIFICATE) |
| { |
| al=SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_WRONG_MESSAGE_TYPE); |
| goto f_err; |
| } |
| p=d=(unsigned char *)s->init_msg; |
| |
| if ((sk=sk_X509_new_null()) == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| n2l3(p,llen); |
| if (llen+3 != n) |
| { |
| al=SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_LENGTH_MISMATCH); |
| goto f_err; |
| } |
| for (nc=0; nc<llen; ) |
| { |
| n2l3(p,l); |
| if ((l+nc+3) > llen) |
| { |
| al=SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_CERT_LENGTH_MISMATCH); |
| goto f_err; |
| } |
| |
| if (nc == 0 && s->ctx->retain_only_sha256_of_client_certs) |
| { |
| /* If this is the first certificate, and we don't want |
| * to keep peer certificates in memory, then we hash it |
| * right away. */ |
| SHA256_Init(&sha256); |
| SHA256_Update(&sha256, p, l); |
| SHA256_Final(s->session->peer_sha256, &sha256); |
| s->session->peer_sha256_valid = 1; |
| } |
| |
| q=p; |
| x=d2i_X509(NULL,&p,l); |
| if (x == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, ERR_R_ASN1_LIB); |
| goto err; |
| } |
| if (p != (q+l)) |
| { |
| al=SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_CERT_LENGTH_MISMATCH); |
| goto f_err; |
| } |
| if (!sk_X509_push(sk,x)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| x=NULL; |
| nc+=l+3; |
| } |
| |
| if (sk_X509_num(sk) <= 0) |
| { |
| /* TLS does not mind 0 certs returned */ |
| if (s->version == SSL3_VERSION) |
| { |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_NO_CERTIFICATES_RETURNED); |
| goto f_err; |
| } |
| /* Fail for TLS only if we required a certificate */ |
| else if ((s->verify_mode & SSL_VERIFY_PEER) && |
| (s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE); |
| al=SSL_AD_HANDSHAKE_FAILURE; |
| goto f_err; |
| } |
| /* No client certificate so digest cached records */ |
| if (s->s3->handshake_buffer && !ssl3_digest_cached_records(s)) |
| { |
| al=SSL_AD_INTERNAL_ERROR; |
| goto f_err; |
| } |
| } |
| else |
| { |
| i=ssl_verify_cert_chain(s,sk); |
| if (i <= 0) |
| { |
| al=ssl_verify_alarm_type(s->verify_result); |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, SSL_R_CERTIFICATE_VERIFY_FAILED); |
| goto f_err; |
| } |
| } |
| |
| if (s->session->peer != NULL) /* This should not be needed */ |
| X509_free(s->session->peer); |
| s->session->peer=sk_X509_shift(sk); |
| s->session->verify_result = s->verify_result; |
| |
| /* With the current implementation, sess_cert will always be NULL |
| * when we arrive here. */ |
| if (s->session->sess_cert == NULL) |
| { |
| s->session->sess_cert = ssl_sess_cert_new(); |
| if (s->session->sess_cert == NULL) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_client_certificate, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| } |
| if (s->session->sess_cert->cert_chain != NULL) |
| sk_X509_pop_free(s->session->sess_cert->cert_chain, X509_free); |
| s->session->sess_cert->cert_chain=sk; |
| /* Inconsistency alert: cert_chain does *not* include the |
| * peer's own certificate, while we do include it in s3_clnt.c */ |