| /* | 
 |  * Copyright 2005-2016 The OpenSSL Project Authors. All Rights Reserved. | 
 |  * | 
 |  * Licensed under the OpenSSL license (the "License").  You may not use | 
 |  * this file except in compliance with the License.  You can obtain a copy | 
 |  * in the file LICENSE in the source distribution or at | 
 |  * https://www.openssl.org/source/license.html | 
 |  */ | 
 |  | 
 | #include <openssl/ssl.h> | 
 |  | 
 | #include <assert.h> | 
 | #include <limits.h> | 
 | #include <string.h> | 
 |  | 
 | #include <openssl/err.h> | 
 | #include <openssl/mem.h> | 
 | #include <openssl/nid.h> | 
 |  | 
 | #include "../crypto/internal.h" | 
 | #include "internal.h" | 
 |  | 
 |  | 
 | BSSL_NAMESPACE_BEGIN | 
 |  | 
 | DTLS1_STATE::DTLS1_STATE() | 
 |     : has_change_cipher_spec(false), | 
 |       outgoing_messages_complete(false), | 
 |       flight_has_reply(false), | 
 |       handshake_write_overflow(false), | 
 |       handshake_read_overflow(false), | 
 |       sending_flight(false), | 
 |       sending_ack(false), | 
 |       queued_key_update(QueuedKeyUpdate::kNone) {} | 
 |  | 
 | DTLS1_STATE::~DTLS1_STATE() {} | 
 |  | 
 | bool DTLS1_STATE::Init() { | 
 |   // Set up the initial epochs. | 
 |   read_epoch.aead = SSLAEADContext::CreateNullCipher(); | 
 |   write_epoch.aead = SSLAEADContext::CreateNullCipher(); | 
 |   if (read_epoch.aead == nullptr || write_epoch.aead == nullptr) { | 
 |     return false; | 
 |   } | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | bool dtls1_new(SSL *ssl) { | 
 |   if (!tls_new(ssl)) { | 
 |     return false; | 
 |   } | 
 |   UniquePtr<DTLS1_STATE> d1 = MakeUnique<DTLS1_STATE>(); | 
 |   if (!d1 || !d1->Init()) { | 
 |     tls_free(ssl); | 
 |     return false; | 
 |   } | 
 |  | 
 |   ssl->d1 = d1.release(); | 
 |   return true; | 
 | } | 
 |  | 
 | void dtls1_free(SSL *ssl) { | 
 |   tls_free(ssl); | 
 |  | 
 |   if (ssl == NULL) { | 
 |     return; | 
 |   } | 
 |  | 
 |   Delete(ssl->d1); | 
 |   ssl->d1 = NULL; | 
 | } | 
 |  | 
 | void DTLSTimer::StartMicroseconds(OPENSSL_timeval now, uint64_t microseconds) { | 
 |   uint64_t seconds = microseconds / 1000000; | 
 |   microseconds %= 1000000; | 
 |  | 
 |   now.tv_usec += microseconds; | 
 |   if (now.tv_usec >= 1000000) { | 
 |     now.tv_usec -= 1000000; | 
 |     seconds++; | 
 |   } | 
 |  | 
 |   if (now.tv_sec > UINT64_MAX - seconds) { | 
 |     Stop(); | 
 |     return; | 
 |   } | 
 |   now.tv_sec += seconds; | 
 |   expire_time_ = now; | 
 | } | 
 |  | 
 | void DTLSTimer::Stop() { expire_time_ = {0, 0}; } | 
 |  | 
 | bool DTLSTimer::IsExpired(OPENSSL_timeval now) const { | 
 |   return MicrosecondsRemaining(now) == 0; | 
 | } | 
 |  | 
 | bool DTLSTimer::IsSet() const { | 
 |   return expire_time_.tv_sec != 0 || expire_time_.tv_usec != 0; | 
 | } | 
 |  | 
 | uint64_t DTLSTimer::MicrosecondsRemaining(OPENSSL_timeval now) const { | 
 |   if (!IsSet()) { | 
 |     return kNever; | 
 |   } | 
 |  | 
 |   if (now.tv_sec > expire_time_.tv_sec || | 
 |       (now.tv_sec == expire_time_.tv_sec && | 
 |        now.tv_usec >= expire_time_.tv_usec)) { | 
 |     return 0; | 
 |   } | 
 |  | 
 |   uint64_t sec = expire_time_.tv_sec - now.tv_sec; | 
 |   uint32_t usec; | 
 |   if (expire_time_.tv_usec >= now.tv_usec) { | 
 |     usec = expire_time_.tv_usec - now.tv_usec; | 
 |   } else { | 
 |     sec--; | 
 |     usec = expire_time_.tv_usec + 1000000 - now.tv_usec; | 
 |   } | 
 |  | 
 |   // If remaining time is less than 15 ms, return 0 to prevent issues because of | 
 |   // small divergences with socket timeouts. | 
 |   if (sec == 0 && usec < 15000) { | 
 |     return 0; | 
 |   } | 
 |  | 
 |   if (sec > UINT64_MAX / 1000000) { | 
 |     return kNever; | 
 |   } | 
 |   sec *= 1000000; | 
 |   if (sec > UINT64_MAX - usec) { | 
 |     return kNever; | 
 |   } | 
 |   return sec + usec; | 
 | } | 
 |  | 
 | void dtls1_stop_timer(SSL *ssl) { | 
 |   ssl->d1->num_timeouts = 0; | 
 |   ssl->d1->retransmit_timer.Stop(); | 
 |   ssl->d1->timeout_duration_ms = ssl->initial_timeout_duration_ms; | 
 | } | 
 |  | 
 | BSSL_NAMESPACE_END | 
 |  | 
 | using namespace bssl; | 
 |  | 
 | void DTLSv1_set_initial_timeout_duration(SSL *ssl, uint32_t duration_ms) { | 
 |   ssl->initial_timeout_duration_ms = duration_ms; | 
 | } | 
 |  | 
 | int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out) { | 
 |   if (!SSL_is_dtls(ssl)) { | 
 |     return 0; | 
 |   } | 
 |  | 
 |   OPENSSL_timeval now = ssl_ctx_get_current_time(ssl->ctx.get()); | 
 |   uint64_t remaining_usec = | 
 |       ssl->d1->retransmit_timer.MicrosecondsRemaining(now); | 
 |   remaining_usec = | 
 |       std::min(remaining_usec, ssl->d1->ack_timer.MicrosecondsRemaining(now)); | 
 |   if (remaining_usec == DTLSTimer::kNever) { | 
 |     return 0;  // No timeout is set. | 
 |   } | 
 |  | 
 |   uint64_t remaining_sec = remaining_usec / 1000000; | 
 |   remaining_usec %= 1000000; | 
 |  | 
 |   // |timeval| uses |time_t|, which may be 32-bit. | 
 |   const auto kTvSecMax = std::numeric_limits<decltype(out->tv_sec)>::max(); | 
 |   if (remaining_sec > static_cast<uint64_t>(kTvSecMax)) { | 
 |     out->tv_sec = kTvSecMax;  // Saturate the output. | 
 |     out->tv_usec = 999999; | 
 |   } else { | 
 |     out->tv_sec = static_cast<decltype(out->tv_sec)>(remaining_sec); | 
 |   } | 
 |   out->tv_usec = remaining_usec; | 
 |   return 1; | 
 | } | 
 |  | 
 | int DTLSv1_handle_timeout(SSL *ssl) { | 
 |   ssl_reset_error_state(ssl); | 
 |  | 
 |   if (!SSL_is_dtls(ssl)) { | 
 |     OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | 
 |     return -1; | 
 |   } | 
 |  | 
 |   if (!ssl->d1->ack_timer.IsSet() && !ssl->d1->retransmit_timer.IsSet()) { | 
 |     // No timers are running. Don't bother querying the clock. | 
 |     return 0; | 
 |   } | 
 |  | 
 |   OPENSSL_timeval now = ssl_ctx_get_current_time(ssl->ctx.get()); | 
 |   bool any_timer_expired = false; | 
 |   if (ssl->d1->ack_timer.IsExpired(now)) { | 
 |     any_timer_expired = true; | 
 |     ssl->d1->sending_ack = true; | 
 |     ssl->d1->ack_timer.Stop(); | 
 |   } | 
 |  | 
 |   if (ssl->d1->retransmit_timer.IsExpired(now)) { | 
 |     any_timer_expired = true; | 
 |     ssl->d1->sending_flight = true; | 
 |     ssl->d1->retransmit_timer.Stop(); | 
 |  | 
 |     ssl->d1->num_timeouts++; | 
 |     // Reduce MTU after 2 unsuccessful retransmissions. | 
 |     if (ssl->d1->num_timeouts > DTLS1_MTU_TIMEOUTS && | 
 |         !(SSL_get_options(ssl) & SSL_OP_NO_QUERY_MTU)) { | 
 |       long mtu = BIO_ctrl(ssl->wbio.get(), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, | 
 |                           nullptr); | 
 |       if (mtu >= 0 && mtu <= (1 << 30) && (unsigned)mtu >= dtls1_min_mtu()) { | 
 |         ssl->d1->mtu = (unsigned)mtu; | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |   if (!any_timer_expired) { | 
 |     return 0; | 
 |   } | 
 |  | 
 |   return dtls1_flush(ssl); | 
 | } |