| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. |
| * ECC cipher suite support in OpenSSL originally developed by |
| * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. |
| */ |
| /* ==================================================================== |
| * Copyright 2005 Nokia. All rights reserved. |
| * |
| * The portions of the attached software ("Contribution") is developed by |
| * Nokia Corporation and is licensed pursuant to the OpenSSL open source |
| * license. |
| * |
| * The Contribution, originally written by Mika Kousa and Pasi Eronen of |
| * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites |
| * support (see RFC 4279) to OpenSSL. |
| * |
| * No patent licenses or other rights except those expressly stated in |
| * the OpenSSL open source license shall be deemed granted or received |
| * expressly, by implication, estoppel, or otherwise. |
| * |
| * No assurances are provided by Nokia that the Contribution does not |
| * infringe the patent or other intellectual property rights of any third |
| * party or that the license provides you with all the necessary rights |
| * to make use of the Contribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN |
| * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA |
| * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY |
| * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR |
| * OTHERWISE. */ |
| |
| #include <stdio.h> |
| #include <assert.h> |
| |
| #include <openssl/engine.h> |
| #include <openssl/md5.h> |
| #include <openssl/mem.h> |
| #include <openssl/obj.h> |
| #include <openssl/sha.h> |
| |
| #include "ssl_locl.h" |
| |
| |
| struct handshake_digest { |
| long mask; |
| const EVP_MD *(*md_func)(void); |
| }; |
| |
| static const struct handshake_digest ssl_handshake_digests[SSL_MAX_DIGEST] = { |
| {SSL_HANDSHAKE_MAC_MD5, EVP_md5}, |
| {SSL_HANDSHAKE_MAC_SHA, EVP_sha1}, |
| {SSL_HANDSHAKE_MAC_SHA256, EVP_sha256}, |
| {SSL_HANDSHAKE_MAC_SHA384, EVP_sha384}, |
| }; |
| |
| #define CIPHER_ADD 1 |
| #define CIPHER_KILL 2 |
| #define CIPHER_DEL 3 |
| #define CIPHER_ORD 4 |
| #define CIPHER_SPECIAL 5 |
| |
| typedef struct cipher_order_st { |
| const SSL_CIPHER *cipher; |
| int active; |
| int dead; |
| int in_group; |
| struct cipher_order_st *next, *prev; |
| } CIPHER_ORDER; |
| |
| static const SSL_CIPHER cipher_aliases[] = |
| { |
| {0, SSL_TXT_ALL, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| |
| /* "COMPLEMENTOFDEFAULT" (does *not* include ciphersuites not found in |
| ALL!) */ |
| {0, SSL_TXT_CMPDEF, 0, SSL_kEDH | SSL_kEECDH, SSL_aNULL, 0, 0, 0, 0, 0, 0, |
| 0}, |
| |
| /* key exchange aliases |
| * (some of those using only a single bit here combine |
| * multiple key exchange algs according to the RFCs, |
| * e.g. kEDH combines DHE_DSS and DHE_RSA) */ |
| {0, SSL_TXT_kRSA, 0, SSL_kRSA, 0, 0, 0, 0, 0, 0, 0, 0}, |
| |
| {0, SSL_TXT_kEDH, 0, SSL_kEDH, 0, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_DH, 0, SSL_kEDH, 0, 0, 0, 0, 0, 0, 0, 0}, |
| |
| {0, SSL_TXT_kEECDH, 0, SSL_kEECDH, 0, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_ECDH, 0, SSL_kEECDH, 0, 0, 0, 0, 0, 0, 0, 0}, |
| |
| {0, SSL_TXT_kPSK, 0, SSL_kPSK, 0, 0, 0, 0, 0, 0, 0, 0}, |
| |
| /* server authentication aliases */ |
| {0, SSL_TXT_aRSA, 0, 0, SSL_aRSA, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_aNULL, 0, 0, SSL_aNULL, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_aECDSA, 0, 0, SSL_aECDSA, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_ECDSA, 0, 0, SSL_aECDSA, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_aPSK, 0, 0, SSL_aPSK, 0, 0, 0, 0, 0, 0, 0}, |
| |
| /* aliases combining key exchange and server authentication */ |
| {0, SSL_TXT_EDH, 0, SSL_kEDH, ~SSL_aNULL, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_EECDH, 0, SSL_kEECDH, ~SSL_aNULL, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_RSA, 0, SSL_kRSA, SSL_aRSA, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_ADH, 0, SSL_kEDH, SSL_aNULL, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_AECDH, 0, SSL_kEECDH, SSL_aNULL, 0, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_PSK, 0, SSL_kPSK, SSL_aPSK, 0, 0, 0, 0, 0, 0, 0}, |
| |
| /* symmetric encryption aliases */ |
| {0, SSL_TXT_3DES, 0, 0, 0, SSL_3DES, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_RC4, 0, 0, 0, SSL_RC4, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_AES128, 0, 0, 0, SSL_AES128 | SSL_AES128GCM, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_AES256, 0, 0, 0, SSL_AES256 | SSL_AES256GCM, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_AES, 0, 0, 0, SSL_AES, 0, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_AES_GCM, 0, 0, 0, SSL_AES128GCM | SSL_AES256GCM, 0, 0, 0, 0, 0, |
| 0}, |
| {0, SSL_TXT_CHACHA20, 0, 0, 0, SSL_CHACHA20POLY1305, 0, 0, 0, 0, 0, 0}, |
| |
| /* MAC aliases */ |
| {0, SSL_TXT_MD5, 0, 0, 0, 0, SSL_MD5, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_SHA1, 0, 0, 0, 0, SSL_SHA1, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_SHA, 0, 0, 0, 0, SSL_SHA1, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_SHA256, 0, 0, 0, 0, SSL_SHA256, 0, 0, 0, 0, 0}, |
| {0, SSL_TXT_SHA384, 0, 0, 0, 0, SSL_SHA384, 0, 0, 0, 0, 0}, |
| |
| /* protocol version aliases */ |
| {0, SSL_TXT_SSLV3, 0, 0, 0, 0, 0, SSL_SSLV3, 0, 0, 0, 0}, |
| {0, SSL_TXT_TLSV1, 0, 0, 0, 0, 0, SSL_TLSV1, 0, 0, 0, 0}, |
| {0, SSL_TXT_TLSV1_2, 0, 0, 0, 0, 0, SSL_TLSV1_2, 0, 0, 0, 0}, |
| |
| /* strength classes */ |
| {0, SSL_TXT_MEDIUM, 0, 0, 0, 0, 0, 0, SSL_MEDIUM, 0, 0, 0}, |
| {0, SSL_TXT_HIGH, 0, 0, 0, 0, 0, 0, SSL_HIGH, 0, 0, 0}, |
| /* FIPS 140-2 approved ciphersuite */ |
| {0, SSL_TXT_FIPS, 0, 0, 0, 0, 0, 0, SSL_FIPS, 0, 0, 0}, |
| }; |
| |
| int ssl_cipher_get_evp_aead(const EVP_AEAD **out_aead, |
| size_t *out_mac_secret_len, |
| size_t *out_fixed_iv_len, |
| const SSL_CIPHER *cipher, uint16_t version) { |
| *out_aead = NULL; |
| *out_mac_secret_len = 0; |
| *out_fixed_iv_len = 0; |
| |
| switch (cipher->algorithm_enc) { |
| case SSL_AES128GCM: |
| *out_aead = EVP_aead_aes_128_gcm(); |
| *out_fixed_iv_len = 4; |
| return 1; |
| |
| case SSL_AES256GCM: |
| *out_aead = EVP_aead_aes_256_gcm(); |
| *out_fixed_iv_len = 4; |
| return 1; |
| |
| case SSL_CHACHA20POLY1305: |
| *out_aead = EVP_aead_chacha20_poly1305(); |
| *out_fixed_iv_len = 0; |
| return 1; |
| |
| case SSL_RC4: |
| switch (cipher->algorithm_mac) { |
| case SSL_MD5: |
| if (version == SSL3_VERSION) { |
| *out_aead = EVP_aead_rc4_md5_ssl3(); |
| } else { |
| *out_aead = EVP_aead_rc4_md5_tls(); |
| } |
| *out_mac_secret_len = MD5_DIGEST_LENGTH; |
| return 1; |
| case SSL_SHA1: |
| if (version == SSL3_VERSION) { |
| *out_aead = EVP_aead_rc4_sha1_ssl3(); |
| } else { |
| *out_aead = EVP_aead_rc4_sha1_tls(); |
| } |
| *out_mac_secret_len = SHA_DIGEST_LENGTH; |
| return 1; |
| default: |
| return 0; |
| } |
| |
| case SSL_AES128: |
| switch (cipher->algorithm_mac) { |
| case SSL_SHA1: |
| if (version == SSL3_VERSION) { |
| *out_aead = EVP_aead_aes_128_cbc_sha1_ssl3(); |
| *out_fixed_iv_len = 16; |
| } else if (version == TLS1_VERSION) { |
| *out_aead = EVP_aead_aes_128_cbc_sha1_tls_implicit_iv(); |
| *out_fixed_iv_len = 16; |
| } else { |
| *out_aead = EVP_aead_aes_128_cbc_sha1_tls(); |
| } |
| *out_mac_secret_len = SHA_DIGEST_LENGTH; |
| return 1; |
| case SSL_SHA256: |
| *out_aead = EVP_aead_aes_128_cbc_sha256_tls(); |
| *out_mac_secret_len = SHA256_DIGEST_LENGTH; |
| return 1; |
| default: |
| return 0; |
| } |
| |
| case SSL_AES256: |
| switch (cipher->algorithm_mac) { |
| case SSL_SHA1: |
| if (version == SSL3_VERSION) { |
| *out_aead = EVP_aead_aes_256_cbc_sha1_ssl3(); |
| *out_fixed_iv_len = 16; |
| } else if (version == TLS1_VERSION) { |
| *out_aead = EVP_aead_aes_256_cbc_sha1_tls_implicit_iv(); |
| *out_fixed_iv_len = 16; |
| } else { |
| *out_aead = EVP_aead_aes_256_cbc_sha1_tls(); |
| } |
| *out_mac_secret_len = SHA_DIGEST_LENGTH; |
| return 1; |
| case SSL_SHA256: |
| *out_aead = EVP_aead_aes_256_cbc_sha256_tls(); |
| *out_mac_secret_len = SHA256_DIGEST_LENGTH; |
| return 1; |
| case SSL_SHA384: |
| *out_aead = EVP_aead_aes_256_cbc_sha384_tls(); |
| *out_mac_secret_len = SHA384_DIGEST_LENGTH; |
| return 1; |
| default: |
| return 0; |
| } |
| |
| case SSL_3DES: |
| switch (cipher->algorithm_mac) { |
| case SSL_SHA1: |
| if (version == SSL3_VERSION) { |
| *out_aead = EVP_aead_des_ede3_cbc_sha1_ssl3(); |
| *out_fixed_iv_len = 8; |
| } else if (version == TLS1_VERSION) { |
| *out_aead = EVP_aead_des_ede3_cbc_sha1_tls_implicit_iv(); |
| *out_fixed_iv_len = 8; |
| } else { |
| *out_aead = EVP_aead_des_ede3_cbc_sha1_tls(); |
| } |
| *out_mac_secret_len = SHA_DIGEST_LENGTH; |
| return 1; |
| default: |
| return 0; |
| } |
| |
| default: |
| return 0; |
| } |
| } |
| |
| int ssl_get_handshake_digest(size_t idx, long *mask, const EVP_MD **md) { |
| if (idx >= SSL_MAX_DIGEST) { |
| return 0; |
| } |
| *mask = ssl_handshake_digests[idx].mask; |
| *md = ssl_handshake_digests[idx].md_func(); |
| return 1; |
| } |
| |
| #define ITEM_SEP(a) \ |
| (((a) == ':') || ((a) == ' ') || ((a) == ';') || ((a) == ',')) |
| |
| static void ll_append_tail(CIPHER_ORDER **head, CIPHER_ORDER *curr, |
| CIPHER_ORDER **tail) { |
| if (curr == *tail) { |
| return; |
| } |
| if (curr == *head) { |
| *head = curr->next; |
| } |
| if (curr->prev != NULL) { |
| curr->prev->next = curr->next; |
| } |
| if (curr->next != NULL) { |
| curr->next->prev = curr->prev; |
| } |
| (*tail)->next = curr; |
| curr->prev = *tail; |
| curr->next = NULL; |
| *tail = curr; |
| } |
| |
| static void ll_append_head(CIPHER_ORDER **head, CIPHER_ORDER *curr, |
| CIPHER_ORDER **tail) { |
| if (curr == *head) { |
| return; |
| } |
| if (curr == *tail) { |
| *tail = curr->prev; |
| } |
| if (curr->next != NULL) { |
| curr->next->prev = curr->prev; |
| } |
| if (curr->prev != NULL) { |
| curr->prev->next = curr->next; |
| } |
| (*head)->prev = curr; |
| curr->next = *head; |
| curr->prev = NULL; |
| *head = curr; |
| } |
| |
| static void ssl_cipher_collect_ciphers(const SSL_PROTOCOL_METHOD *ssl_method, |
| int num_of_ciphers, |
| CIPHER_ORDER *co_list, |
| CIPHER_ORDER **head_p, |
| CIPHER_ORDER **tail_p) { |
| int i, co_list_num; |
| const SSL_CIPHER *c; |
| |
| /* We have num_of_ciphers descriptions compiled in, depending on the method |
| * selected (SSLv2 and/or SSLv3, TLSv1 etc). These will later be sorted in a |
| * linked list with at most num entries. */ |
| |
| /* Get the initial list of ciphers */ |
| co_list_num = 0; /* actual count of ciphers */ |
| for (i = 0; i < num_of_ciphers; i++) { |
| c = ssl_method->get_cipher(i); |
| /* drop those that use any of that is not available */ |
| if (c != NULL && c->valid) { |
| co_list[co_list_num].cipher = c; |
| co_list[co_list_num].next = NULL; |
| co_list[co_list_num].prev = NULL; |
| co_list[co_list_num].active = 0; |
| co_list[co_list_num].in_group = 0; |
| co_list_num++; |
| } |
| } |
| |
| /* Prepare linked list from list entries. */ |
| if (co_list_num > 0) { |
| co_list[0].prev = NULL; |
| |
| if (co_list_num > 1) { |
| co_list[0].next = &co_list[1]; |
| |
| for (i = 1; i < co_list_num - 1; i++) { |
| co_list[i].prev = &co_list[i - 1]; |
| co_list[i].next = &co_list[i + 1]; |
| } |
| |
| co_list[co_list_num - 1].prev = &co_list[co_list_num - 2]; |
| } |
| |
| co_list[co_list_num - 1].next = NULL; |
| |
| *head_p = &co_list[0]; |
| *tail_p = &co_list[co_list_num - 1]; |
| } |
| } |
| |
| static void ssl_cipher_collect_aliases(const SSL_CIPHER **ca_list, |
| int num_of_group_aliases, |
| CIPHER_ORDER *head) { |
| CIPHER_ORDER *ciph_curr; |
| const SSL_CIPHER **ca_curr; |
| int i; |
| |
| /* First, add the real ciphers as already collected. */ |
| ciph_curr = head; |
| ca_curr = ca_list; |
| while (ciph_curr != NULL) { |
| *ca_curr = ciph_curr->cipher; |
| ca_curr++; |
| ciph_curr = ciph_curr->next; |
| } |
| |
| /* Now we add the available ones from the cipher_aliases[] table. They |
| * represent either one or more algorithms, some of which in any affected |
| * category must be supported (set in enabled_mask), or represent a cipher |
| * strength value (will be added in any case because algorithms=0). */ |
| for (i = 0; i < num_of_group_aliases; i++) { |
| *ca_curr = cipher_aliases + i; |
| ca_curr++; |
| } |
| |
| *ca_curr = NULL; /* end of list */ |
| } |
| |
| static void ssl_cipher_apply_rule( |
| unsigned long cipher_id, unsigned long alg_mkey, unsigned long alg_auth, |
| unsigned long alg_enc, unsigned long alg_mac, unsigned long alg_ssl, |
| unsigned long algo_strength, int rule, int strength_bits, int in_group, |
| CIPHER_ORDER **head_p, CIPHER_ORDER **tail_p) { |
| CIPHER_ORDER *head, *tail, *curr, *next, *last; |
| const SSL_CIPHER *cp; |
| int reverse = 0; |
| |
| if (rule == CIPHER_DEL) { |
| /* needed to maintain sorting between currently deleted ciphers */ |
| reverse = 1; |
| } |
| |
| head = *head_p; |
| tail = *tail_p; |
| |
| if (reverse) { |
| next = tail; |
| last = head; |
| } else { |
| next = head; |
| last = tail; |
| } |
| |
| curr = NULL; |
| for (;;) { |
| if (curr == last) { |
| break; |
| } |
| |
| curr = next; |
| if (curr == NULL) { |
| break; |
| } |
| |
| next = reverse ? curr->prev : curr->next; |
| cp = curr->cipher; |
| |
| /* Selection criteria is either the value of strength_bits |
| * or the algorithms used. */ |
| if (strength_bits >= 0) { |
| if (strength_bits != cp->strength_bits) { |
| continue; |
| } |
| } else { |
| if ((alg_mkey && !(alg_mkey & cp->algorithm_mkey)) || |
| (alg_auth && !(alg_auth & cp->algorithm_auth)) || |
| (alg_enc && !(alg_enc & cp->algorithm_enc)) || |
| (alg_mac && !(alg_mac & cp->algorithm_mac)) || |
| (alg_ssl && !(alg_ssl & cp->algorithm_ssl)) || |
| (algo_strength && !(algo_strength & cp->algo_strength))) { |
| continue; |
| } |
| } |
| |
| /* add the cipher if it has not been added yet. */ |
| if (rule == CIPHER_ADD) { |
| /* reverse == 0 */ |
| if (!curr->active) { |
| ll_append_tail(&head, curr, &tail); |
| curr->active = 1; |
| curr->in_group = in_group; |
| } |
| } |
| |
| /* Move the added cipher to this location */ |
| else if (rule == CIPHER_ORD) { |
| /* reverse == 0 */ |
| if (curr->active) { |
| ll_append_tail(&head, curr, &tail); |
| curr->in_group = 0; |
| } |
| } else if (rule == CIPHER_DEL) { |
| /* reverse == 1 */ |
| if (curr->active) { |
| /* most recently deleted ciphersuites get best positions |
| * for any future CIPHER_ADD (note that the CIPHER_DEL loop |
| * works in reverse to maintain the order) */ |
| ll_append_head(&head, curr, &tail); |
| curr->active = 0; |
| curr->in_group = 0; |
| } |
| } else if (rule == CIPHER_KILL) { |
| /* reverse == 0 */ |
| if (head == curr) { |
| head = curr->next; |
| } else { |
| curr->prev->next = curr->next; |
| } |
| |
| if (tail == curr) { |
| tail = curr->prev; |
| } |
| curr->active = 0; |
| if (curr->next != NULL) { |
| curr->next->prev = curr->prev; |
| } |
| if (curr->prev != NULL) { |
| curr->prev->next = curr->next; |
| } |
| curr->next = NULL; |
| curr->prev = NULL; |
| } |
| } |
| |
| *head_p = head; |
| *tail_p = tail; |
| } |
| |
| static int ssl_cipher_strength_sort(CIPHER_ORDER **head_p, |
| CIPHER_ORDER **tail_p) { |
| int max_strength_bits, i, *number_uses; |
| CIPHER_ORDER *curr; |
| |
| /* This routine sorts the ciphers with descending strength. The sorting must |
| * keep the pre-sorted sequence, so we apply the normal sorting routine as |
| * '+' movement to the end of the list. */ |
| max_strength_bits = 0; |
| curr = *head_p; |
| while (curr != NULL) { |
| if (curr->active && curr->cipher->strength_bits > max_strength_bits) { |
| max_strength_bits = curr->cipher->strength_bits; |
| } |
| curr = curr->next; |
| } |
| |
| number_uses = OPENSSL_malloc((max_strength_bits + 1) * sizeof(int)); |
| if (!number_uses) { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_strength_sort, ERR_R_MALLOC_FAILURE); |
| return 0; |
| } |
| memset(number_uses, 0, (max_strength_bits + 1) * sizeof(int)); |
| |
| /* Now find the strength_bits values actually used. */ |
| curr = *head_p; |
| while (curr != NULL) { |
| if (curr->active) { |
| number_uses[curr->cipher->strength_bits]++; |
| } |
| curr = curr->next; |
| } |
| |
| /* Go through the list of used strength_bits values in descending order. */ |
| for (i = max_strength_bits; i >= 0; i--) { |
| if (number_uses[i] > 0) { |
| ssl_cipher_apply_rule(0, 0, 0, 0, 0, 0, 0, CIPHER_ORD, i, 0, head_p, |
| tail_p); |
| } |
| } |
| |
| OPENSSL_free(number_uses); |
| return 1; |
| } |
| |
| static int ssl_cipher_process_rulestr(const char *rule_str, |
| CIPHER_ORDER **head_p, |
| CIPHER_ORDER **tail_p, |
| const SSL_CIPHER **ca_list) { |
| unsigned long alg_mkey, alg_auth, alg_enc, alg_mac, alg_ssl, algo_strength; |
| const char *l, *buf; |
| int j, multi, found, rule, retval, ok, buflen, in_group = 0, has_group = 0; |
| unsigned long cipher_id = 0; |
| char ch; |
| |
| retval = 1; |
| l = rule_str; |
| for (;;) { |
| ch = *l; |
| |
| if (ch == '\0') { |
| break; /* done */ |
| } |
| |
| if (in_group) { |
| if (ch == ']') { |
| if (!in_group) { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, |
| SSL_R_UNEXPECTED_GROUP_CLOSE); |
| retval = found = in_group = 0; |
| break; |
| } |
| if (*tail_p) { |
| (*tail_p)->in_group = 0; |
| } |
| in_group = 0; |
| l++; |
| continue; |
| } |
| |
| if (ch == '|') { |
| rule = CIPHER_ADD; |
| l++; |
| continue; |
| } else if (!(ch >= 'a' && ch <= 'z') && !(ch >= 'A' && ch <= 'Z') && |
| !(ch >= '0' && ch <= '9')) { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, |
| SSL_R_UNEXPECTED_OPERATOR_IN_GROUP); |
| retval = found = in_group = 0; |
| break; |
| } else { |
| rule = CIPHER_ADD; |
| } |
| } else if (ch == '-') { |
| rule = CIPHER_DEL; |
| l++; |
| } else if (ch == '+') { |
| rule = CIPHER_ORD; |
| l++; |
| } else if (ch == '!') { |
| rule = CIPHER_KILL; |
| l++; |
| } else if (ch == '@') { |
| rule = CIPHER_SPECIAL; |
| l++; |
| } else if (ch == '[') { |
| if (in_group) { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, SSL_R_NESTED_GROUP); |
| retval = found = in_group = 0; |
| break; |
| } |
| in_group = 1; |
| has_group = 1; |
| l++; |
| continue; |
| } else { |
| rule = CIPHER_ADD; |
| } |
| |
| /* If preference groups are enabled, the only legal operator is +. |
| * Otherwise the in_group bits will get mixed up. */ |
| if (has_group && rule != CIPHER_ADD) { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, |
| SSL_R_MIXED_SPECIAL_OPERATOR_WITH_GROUPS); |
| retval = found = in_group = 0; |
| break; |
| } |
| |
| if (ITEM_SEP(ch)) { |
| l++; |
| continue; |
| } |
| |
| alg_mkey = 0; |
| alg_auth = 0; |
| alg_enc = 0; |
| alg_mac = 0; |
| alg_ssl = 0; |
| algo_strength = 0; |
| |
| for (;;) { |
| ch = *l; |
| buf = l; |
| buflen = 0; |
| while (((ch >= 'A') && (ch <= 'Z')) || ((ch >= '0') && (ch <= '9')) || |
| ((ch >= 'a') && (ch <= 'z')) || (ch == '-') || (ch == '.')) { |
| ch = *(++l); |
| buflen++; |
| } |
| |
| if (buflen == 0) { |
| /* We hit something we cannot deal with, it is no command or separator |
| * nor alphanumeric, so we call this an error. */ |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, |
| SSL_R_INVALID_COMMAND); |
| retval = found = in_group = 0; |
| l++; |
| break; |
| } |
| |
| if (rule == CIPHER_SPECIAL) { |
| found = 0; /* unused -- avoid compiler warning */ |
| break; /* special treatment */ |
| } |
| |
| /* check for multi-part specification */ |
| if (ch == '+') { |
| multi = 1; |
| l++; |
| } else { |
| multi = 0; |
| } |
| |
| /* Now search for the cipher alias in the ca_list. Be careful with the |
| * strncmp, because the "buflen" limitation will make the rule "ADH:SOME" |
| * and the cipher "ADH-MY-CIPHER" look like a match for buflen=3. So |
| * additionally check whether the cipher name found has the correct |
| * length. We can save a strlen() call: just checking for the '\0' at the |
| * right place is sufficient, we have to strncmp() anyway. (We cannot use |
| * strcmp(), because buf is not '\0' terminated.) */ |
| j = found = 0; |
| cipher_id = 0; |
| while (ca_list[j]) { |
| if (!strncmp(buf, ca_list[j]->name, buflen) && |
| (ca_list[j]->name[buflen] == '\0')) { |
| found = 1; |
| break; |
| } else { |
| j++; |
| } |
| } |
| |
| if (!found) { |
| break; /* ignore this entry */ |
| } |
| |
| if (ca_list[j]->algorithm_mkey) { |
| if (alg_mkey) { |
| alg_mkey &= ca_list[j]->algorithm_mkey; |
| if (!alg_mkey) { |
| found = 0; |
| break; |
| } |
| } else { |
| alg_mkey = ca_list[j]->algorithm_mkey; |
| } |
| } |
| |
| if (ca_list[j]->algorithm_auth) { |
| if (alg_auth) { |
| alg_auth &= ca_list[j]->algorithm_auth; |
| if (!alg_auth) { |
| found = 0; |
| break; |
| } |
| } else { |
| alg_auth = ca_list[j]->algorithm_auth; |
| } |
| } |
| |
| if (ca_list[j]->algorithm_enc) { |
| if (alg_enc) { |
| alg_enc &= ca_list[j]->algorithm_enc; |
| if (!alg_enc) { |
| found = 0; |
| break; |
| } |
| } else { |
| alg_enc = ca_list[j]->algorithm_enc; |
| } |
| } |
| |
| if (ca_list[j]->algorithm_mac) { |
| if (alg_mac) { |
| alg_mac &= ca_list[j]->algorithm_mac; |
| if (!alg_mac) { |
| found = 0; |
| break; |
| } |
| } else { |
| alg_mac = ca_list[j]->algorithm_mac; |
| } |
| } |
| |
| if (ca_list[j]->algo_strength) { |
| if (algo_strength) { |
| algo_strength &= ca_list[j]->algo_strength; |
| if (!algo_strength) { |
| found = 0; |
| break; |
| } |
| } else { |
| algo_strength |= ca_list[j]->algo_strength; |
| } |
| } |
| |
| if (ca_list[j]->valid) { |
| /* explicit ciphersuite found; its protocol version does not become |
| * part of the search pattern! */ |
| cipher_id = ca_list[j]->id; |
| } else { |
| /* not an explicit ciphersuite; only in this case, the protocol version |
| * is considered part of the search pattern. */ |
| if (ca_list[j]->algorithm_ssl) { |
| if (alg_ssl) { |
| alg_ssl &= ca_list[j]->algorithm_ssl; |
| if (!alg_ssl) { |
| found = 0; |
| break; |
| } |
| } else { |
| alg_ssl = ca_list[j]->algorithm_ssl; |
| } |
| } |
| } |
| |
| if (!multi) { |
| break; |
| } |
| } |
| |
| /* Ok, we have the rule, now apply it. */ |
| if (rule == CIPHER_SPECIAL) { |
| /* special command */ |
| ok = 0; |
| if (buflen == 8 && !strncmp(buf, "STRENGTH", 8)) { |
| ok = ssl_cipher_strength_sort(head_p, tail_p); |
| } else { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, |
| SSL_R_INVALID_COMMAND); |
| } |
| |
| if (ok == 0) { |
| retval = 0; |
| } |
| |
| /* We do not support any "multi" options together with "@", so throw away |
| * the rest of the command, if any left, until end or ':' is found. */ |
| while (*l != '\0' && !ITEM_SEP(*l)) { |
| l++; |
| } |
| } else if (found) { |
| ssl_cipher_apply_rule(cipher_id, alg_mkey, alg_auth, alg_enc, alg_mac, |
| alg_ssl, algo_strength, rule, -1, in_group, head_p, |
| tail_p); |
| } else { |
| while (*l != '\0' && !ITEM_SEP(*l)) { |
| l++; |
| } |
| } |
| } |
| |
| if (in_group) { |
| OPENSSL_PUT_ERROR(SSL, ssl_cipher_process_rulestr, SSL_R_INVALID_COMMAND); |
| retval = 0; |
| } |
| |
| return retval; |
| } |
| |
| STACK_OF(SSL_CIPHER) * |
| ssl_create_cipher_list(const SSL_PROTOCOL_METHOD *ssl_method, |
| struct ssl_cipher_preference_list_st **cipher_list, |
| STACK_OF(SSL_CIPHER) * *cipher_list_by_id, |
| const char *rule_str, CERT *c) { |
| int ok, num_of_ciphers, num_of_alias_max, num_of_group_aliases; |
| STACK_OF(SSL_CIPHER) *cipherstack = NULL, *tmp_cipher_list = NULL; |
| const char *rule_p; |
| CIPHER_ORDER *co_list = NULL, *head = NULL, *tail = NULL, *curr; |
| const SSL_CIPHER **ca_list = NULL; |
| uint8_t *in_group_flags = NULL; |
| unsigned int num_in_group_flags = 0; |
| struct ssl_cipher_preference_list_st *pref_list = NULL; |
| |
| /* Return with error if nothing to do. */ |
| if (rule_str == NULL || cipher_list == NULL) { |
| return NULL; |
| } |
| |
| /* Now we have to collect the available ciphers from the compiled in ciphers. |
| * We cannot get more than the number compiled in, so it is used for |
| * allocation. */ |
| num_of_ciphers = ssl_method->num_ciphers(); |
| co_list = |
| (CIPHER_ORDER *)OPENSSL_malloc(sizeof(CIPHER_ORDER) * num_of_ciphers); |
| if (co_list == NULL) { |
| OPENSSL_PUT_ERROR(SSL, ssl_create_cipher_list, ERR_R_MALLOC_FAILURE); |
| return NULL; |
| } |
| |
| ssl_cipher_collect_ciphers(ssl_method, num_of_ciphers, co_list, &head, &tail); |
| |
| /* Now arrange all ciphers by preference: |
| * TODO(davidben): Compute this order once and copy it. */ |
| |
| /* Everything else being equal, prefer ECDHE_ECDSA then ECDHE_RSA over other |
| * key exchange mechanisms */ |
| ssl_cipher_apply_rule(0, SSL_kEECDH, SSL_aECDSA, 0, 0, 0, 0, CIPHER_ADD, -1, |
| 0, &head, &tail); |
| ssl_cipher_apply_rule(0, SSL_kEECDH, 0, 0, 0, 0, 0, CIPHER_ADD, -1, 0, &head, |
| &tail); |
| ssl_cipher_apply_rule(0, SSL_kEECDH, 0, 0, 0, 0, 0, CIPHER_DEL, -1, 0, &head, |
| &tail); |
| |
| /* Order the bulk ciphers. First the preferred AEAD ciphers. We prefer |
| * CHACHA20 unless there is hardware support for fast and constant-time |
| * AES_GCM. */ |
| if (EVP_has_aes_hardware()) { |
| ssl_cipher_apply_rule(0, 0, 0, SSL_AES256GCM, 0, 0, 0, CIPHER_ADD, -1, 0, |
| &head, &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_AES128GCM, 0, 0, 0, CIPHER_ADD, -1, 0, |
| &head, &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_CHACHA20POLY1305, 0, 0, 0, CIPHER_ADD, |
| -1, 0, &head, &tail); |
| } else { |
| ssl_cipher_apply_rule(0, 0, 0, SSL_CHACHA20POLY1305, 0, 0, 0, CIPHER_ADD, |
| -1, 0, &head, &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_AES256GCM, 0, 0, 0, CIPHER_ADD, -1, 0, |
| &head, &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_AES128GCM, 0, 0, 0, CIPHER_ADD, -1, 0, |
| &head, &tail); |
| } |
| |
| /* Then the legacy non-AEAD ciphers: AES_256_CBC, AES-128_CBC, RC4_128_SHA, |
| * RC4_128_MD5, 3DES_EDE_CBC_SHA. */ |
| ssl_cipher_apply_rule(0, 0, 0, SSL_AES256, 0, 0, 0, CIPHER_ADD, -1, 0, &head, |
| &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_AES128, 0, 0, 0, CIPHER_ADD, -1, 0, &head, |
| &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_RC4, ~SSL_MD5, 0, 0, CIPHER_ADD, -1, 0, |
| &head, &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_RC4, SSL_MD5, 0, 0, CIPHER_ADD, -1, 0, |
| &head, &tail); |
| ssl_cipher_apply_rule(0, 0, 0, SSL_3DES, 0, 0, 0, CIPHER_ADD, -1, 0, &head, |
| &tail); |
| |
| /* Temporarily enable everything else for sorting */ |
| ssl_cipher_apply_rule(0, 0, 0, 0, 0, 0, 0, CIPHER_ADD, -1, 0, &head, &tail); |
| |
| /* Move ciphers without forward secrecy to the end. */ |
| ssl_cipher_apply_rule(0, ~(SSL_kEDH | SSL_kEECDH), 0, 0, 0, 0, 0, CIPHER_ORD, |
| -1, 0, &head, &tail); |
| |
| /* Move anonymous ciphers to the end. Usually, these will remain disabled. |
| * (For applications that allow them, they aren't too bad, but we prefer |
| * authenticated ciphers.) |
| * TODO(davidben): Remove them altogether? */ |
| ssl_cipher_apply_rule(0, 0, SSL_aNULL, 0, 0, 0, 0, CIPHER_ORD, -1, 0, &head, |
| &tail); |
| |
| /* Now disable everything (maintaining the ordering!) */ |
| ssl_cipher_apply_rule(0, 0, 0, 0, 0, 0, 0, CIPHER_DEL, -1, 0, &head, &tail); |
| |
| /* We also need cipher aliases for selecting based on the rule_str. There |
| * might be two types of entries in the rule_str: 1) names of ciphers |
| * themselves 2) aliases for groups of ciphers. For 1) we need the available |
| * ciphers and for 2) the cipher groups of cipher_aliases added together in |
| * one list (otherwise we would be happy with just the cipher_aliases |
| * table). */ |
| num_of_group_aliases = sizeof(cipher_aliases) / sizeof(SSL_CIPHER); |
| num_of_alias_max = num_of_ciphers + num_of_group_aliases + 1; |
| ca_list = OPENSSL_malloc(sizeof(SSL_CIPHER *) * num_of_alias_max); |
| if (ca_list == NULL) { |
| OPENSSL_PUT_ERROR(SSL, ssl_create_cipher_list, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| ssl_cipher_collect_aliases(ca_list, num_of_group_aliases, head); |
| |
| /* If the rule_string begins with DEFAULT, apply the default rule before |
| * using the (possibly available) additional rules. */ |
| ok = 1; |
| rule_p = rule_str; |
| if (strncmp(rule_str, "DEFAULT", 7) == 0) { |
| ok = ssl_cipher_process_rulestr(SSL_DEFAULT_CIPHER_LIST, &head, &tail, |
| ca_list); |
| rule_p += 7; |
| if (*rule_p == ':') { |
| rule_p++; |
| } |
| } |
| |
| if (ok && strlen(rule_p) > 0) { |
| ok = ssl_cipher_process_rulestr(rule_p, &head, &tail, ca_list); |
| } |
| |
| OPENSSL_free((void *)ca_list); /* Not needed anymore */ |
| |
| if (!ok) { |
| goto err; |
| } |
| |
| /* Allocate new "cipherstack" for the result, return with error |
| * if we cannot get one. */ |
| cipherstack = sk_SSL_CIPHER_new_null(); |
| if (cipherstack == NULL) { |
| goto err; |
| } |
| |
| in_group_flags = OPENSSL_malloc(num_of_ciphers); |
| if (!in_group_flags) { |
| goto err; |
| } |
| |
| /* The cipher selection for the list is done. The ciphers are added |
| * to the resulting precedence to the STACK_OF(SSL_CIPHER). */ |
| for (curr = head; curr != NULL; curr = curr->next) { |
| if (curr->active) { |
| if (!sk_SSL_CIPHER_push(cipherstack, curr->cipher)) { |
| goto err; |
| } |
| in_group_flags[num_in_group_flags++] = curr->in_group; |
| } |
| } |
| OPENSSL_free(co_list); /* Not needed any longer */ |
| co_list = NULL; |
| |
| tmp_cipher_list = sk_SSL_CIPHER_dup(cipherstack); |
| if (tmp_cipher_list == NULL) { |
| goto err; |
| } |
| pref_list = OPENSSL_malloc(sizeof(struct ssl_cipher_preference_list_st)); |
| if (!pref_list) { |
| goto err; |
| } |
| pref_list->ciphers = cipherstack; |
| pref_list->in_group_flags = OPENSSL_malloc(num_in_group_flags); |
| if (!pref_list->in_group_flags) { |
| goto err; |
| } |
| memcpy(pref_list->in_group_flags, in_group_flags, num_in_group_flags); |
| OPENSSL_free(in_group_flags); |
| in_group_flags = NULL; |
| if (*cipher_list != NULL) { |
| ssl_cipher_preference_list_free(*cipher_list); |
| } |
| *cipher_list = pref_list; |
| pref_list = NULL; |
| |
| if (cipher_list_by_id != NULL) { |
| if (*cipher_list_by_id != NULL) { |
| sk_SSL_CIPHER_free(*cipher_list_by_id); |
| } |
| *cipher_list_by_id = tmp_cipher_list; |
| tmp_cipher_list = NULL; |
| (void) sk_SSL_CIPHER_set_cmp_func(*cipher_list_by_id, ssl_cipher_ptr_id_cmp); |
| |
| sk_SSL_CIPHER_sort(*cipher_list_by_id); |
| } else { |
| sk_SSL_CIPHER_free(tmp_cipher_list); |
| tmp_cipher_list = NULL; |
| } |
| |
| return cipherstack; |
| |
| err: |
| if (co_list) { |
| OPENSSL_free(co_list); |
| } |
| if (in_group_flags) { |
| OPENSSL_free(in_group_flags); |
| } |
| if (cipherstack) { |
| sk_SSL_CIPHER_free(cipherstack); |
| } |
| if (tmp_cipher_list) { |
| sk_SSL_CIPHER_free(tmp_cipher_list); |
| } |
| if (pref_list && pref_list->in_group_flags) { |
| OPENSSL_free(pref_list->in_group_flags); |
| } |
| if (pref_list) { |
| OPENSSL_free(pref_list); |
| } |
| return NULL; |
| } |
| |
| const char *SSL_CIPHER_description(const SSL_CIPHER *cipher, char *buf, |
| int len) { |
| const char *ver; |
| const char *kx, *au, *enc, *mac; |
| unsigned long alg_mkey, alg_auth, alg_enc, alg_mac, alg_ssl; |
| static const char *format = "%-23s %s Kx=%-8s Au=%-4s Enc=%-9s Mac=%-4s\n"; |
| |
| alg_mkey = cipher->algorithm_mkey; |
| alg_auth = cipher->algorithm_auth; |
| alg_enc = cipher->algorithm_enc; |
| alg_mac = cipher->algorithm_mac; |
| alg_ssl = cipher->algorithm_ssl; |
| |
| if (alg_ssl & SSL_SSLV3) { |
| ver = "SSLv3"; |
| } else if (alg_ssl & SSL_TLSV1_2) { |
| ver = "TLSv1.2"; |
| } else { |
| ver = "unknown"; |
| } |
| |
| switch (alg_mkey) { |
| case SSL_kRSA: |
| kx = "RSA"; |
| break; |
| |
| case SSL_kEDH: |
| kx = "DH"; |
| break; |
| |
| case SSL_kEECDH: |
| kx = "ECDH"; |
| break; |
| |
| case SSL_kPSK: |
| kx = "PSK"; |
| break; |
| |
| default: |
| kx = "unknown"; |
| } |
| |
| switch (alg_auth) { |
| case SSL_aRSA: |
| au = "RSA"; |
| break; |
| |
| case SSL_aNULL: |
| au = "None"; |
| break; |
| |
| case SSL_aECDSA: |
| au = "ECDSA"; |
| break; |
| |
| case SSL_aPSK: |
| au = "PSK"; |
| break; |
| |
| default: |
| au = "unknown"; |
| break; |
| } |
| |
| switch (alg_enc) { |
| case SSL_3DES: |
| enc = "3DES(168)"; |
| break; |
| |
| case SSL_RC4: |
| enc = "RC4(128)"; |
| break; |
| |
| case SSL_AES128: |
| enc = "AES(128)"; |
| break; |
| |
| case SSL_AES256: |
| enc = "AES(256)"; |
| break; |
| |
| case SSL_AES128GCM: |
| enc = "AESGCM(128)"; |
| break; |
| |
| case SSL_AES256GCM: |
| enc = "AESGCM(256)"; |
| break; |
| |
| case SSL_CHACHA20POLY1305: |
| enc = "ChaCha20-Poly1305"; |
| break; |
| |
| default: |
| enc = "unknown"; |
| break; |
| } |
| |
| switch (alg_mac) { |
| case SSL_MD5: |
| mac = "MD5"; |
| break; |
| |
| case SSL_SHA1: |
| mac = "SHA1"; |
| break; |
| |
| case SSL_SHA256: |
| mac = "SHA256"; |
| break; |
| |
| case SSL_SHA384: |
| mac = "SHA384"; |
| break; |
| |
| case SSL_AEAD: |
| mac = "AEAD"; |
| break; |
| |
| default: |
| mac = "unknown"; |
| break; |
| } |
| |
| if (buf == NULL) { |
| len = 128; |
| buf = OPENSSL_malloc(len); |
| if (buf == NULL) { |
| return NULL; |
| } |
| } else if (len < 128) { |
| return "Buffer too small"; |
| } |
| |
| BIO_snprintf(buf, len, format, cipher->name, ver, kx, au, enc, mac); |
| return buf; |
| } |
| |
| int SSL_CIPHER_is_AES(const SSL_CIPHER *c) { |
| return (c->algorithm_enc & SSL_AES) != 0; |
| } |
| |
| int SSL_CIPHER_has_MD5_HMAC(const SSL_CIPHER *c) { |
| return (c->algorithm_mac & SSL_MD5) != 0; |
| } |
| |
| int SSL_CIPHER_is_AESGCM(const SSL_CIPHER *c) { |
| return (c->algorithm_mac & (SSL_AES128GCM | SSL_AES256GCM)) != 0; |
| } |
| |
| int SSL_CIPHER_is_CHACHA20POLY1305(const SSL_CIPHER *c) { |
| return (c->algorithm_enc & SSL_CHACHA20POLY1305) != 0; |
| } |
| |
| const char *SSL_CIPHER_get_version(const SSL_CIPHER *c) { |
| int i; |
| |
| if (c == NULL) { |
| return "(NONE)"; |
| } |
| |
| i = (int)(c->id >> 24L); |
| if (i == 3) { |
| return "TLSv1/SSLv3"; |
| } else if (i == 2) { |
| return "SSLv2"; |
| } else { |
| return "unknown"; |
| } |
| } |
| |
| /* return the actual cipher being used */ |
| const char *SSL_CIPHER_get_name(const SSL_CIPHER *c) { |
| if (c != NULL) { |
| return c->name; |
| } |
| |
| return "(NONE)"; |
| } |
| |
| const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher) { |
| if (cipher == NULL) { |
| return ""; |
| } |
| |
| switch (cipher->algorithm_mkey) { |
| case SSL_kRSA: |
| return "RSA"; |
| |
| case SSL_kEDH: |
| switch (cipher->algorithm_auth) { |
| case SSL_aRSA: |
| return "DHE_RSA"; |
| case SSL_aNULL: |
| return "DH_anon"; |
| default: |
| assert(0); |
| return "UNKNOWN"; |
| } |
| |
| case SSL_kEECDH: |
| switch (cipher->algorithm_auth) { |
| case SSL_aECDSA: |
| return "ECDHE_ECDSA"; |
| case SSL_aRSA: |
| return "ECDHE_RSA"; |
| case SSL_aPSK: |
| return "ECDHE_PSK"; |
| case SSL_aNULL: |
| return "ECDH_anon"; |
| default: |
| assert(0); |
| return "UNKNOWN"; |
| } |
| |
| case SSL_kPSK: |
| assert(cipher->algorithm_auth == SSL_aPSK); |
| return "PSK"; |
| |
| default: |
| assert(0); |
| return "UNKNOWN"; |
| } |
| } |
| |
| static const char *ssl_cipher_get_enc_name(const SSL_CIPHER *cipher) { |
| switch (cipher->algorithm_enc) { |
| case SSL_3DES: |
| return "3DES_EDE_CBC"; |
| case SSL_RC4: |
| return "RC4"; |
| case SSL_AES128: |
| return "AES_128_CBC"; |
| case SSL_AES256: |
| return "AES_256_CBC"; |
| case SSL_AES128GCM: |
| return "AES_128_GCM"; |
| case SSL_AES256GCM: |
| return "AES_256_GCM"; |
| case SSL_CHACHA20POLY1305: |
| return "CHACHA20_POLY1305"; |
| break; |
| default: |
| assert(0); |
| return "UNKNOWN"; |
| } |
| } |
| |
| static const char *ssl_cipher_get_prf_name(const SSL_CIPHER *cipher) { |
| if ((cipher->algorithm2 & TLS1_PRF) == TLS1_PRF) { |
| /* Before TLS 1.2, the PRF component is the hash used in the HMAC, which is |
| * only ever MD5 or SHA-1. */ |
| switch (cipher->algorithm_mac) { |
| case SSL_MD5: |
| return "MD5"; |
| case SSL_SHA1: |
| return "SHA"; |
| default: |
| assert(0); |
| return "UNKNOWN"; |
| } |
| } else if (cipher->algorithm2 & TLS1_PRF_SHA256) { |
| return "SHA256"; |
| } else if (cipher->algorithm2 & TLS1_PRF_SHA384) { |
| return "SHA384"; |
| } else { |
| assert(0); |
| return "UNKNOWN"; |
| } |
| } |
| |
| char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher) { |
| if (cipher == NULL) { |
| return NULL; |
| } |
| |
| const char *kx_name = SSL_CIPHER_get_kx_name(cipher); |
| const char *enc_name = ssl_cipher_get_enc_name(cipher); |
| const char *prf_name = ssl_cipher_get_prf_name(cipher); |
| |
| /* The final name is TLS_{kx_name}_WITH_{enc_name}_{prf_name}. */ |
| size_t len = 4 + strlen(kx_name) + 6 + strlen(enc_name) + 1 + |
| strlen(prf_name) + 1; |
| char *ret = OPENSSL_malloc(len); |
| if (ret == NULL) { |
| return NULL; |
| } |
| if (BUF_strlcpy(ret, "TLS_", len) >= len || |
| BUF_strlcat(ret, kx_name, len) >= len || |
| BUF_strlcat(ret, "_WITH_", len) >= len || |
| BUF_strlcat(ret, enc_name, len) >= len || |
| BUF_strlcat(ret, "_", len) >= len || |
| BUF_strlcat(ret, prf_name, len) >= len) { |
| assert(0); |
| OPENSSL_free(ret); |
| return NULL; |
| } |
| assert(strlen(ret) + 1 == len); |
| return ret; |
| } |
| |
| /* number of bits for symmetric cipher */ |
| int SSL_CIPHER_get_bits(const SSL_CIPHER *c, int *alg_bits) { |
| int ret = 0; |
| |
| if (c != NULL) { |
| if (alg_bits != NULL) { |
| *alg_bits = c->alg_bits; |
| } |
| ret = c->strength_bits; |
| } |
| |
| return ret; |
| } |
| |
| unsigned long SSL_CIPHER_get_id(const SSL_CIPHER *c) { return c->id; } |
| |
| void *SSL_COMP_get_compression_methods(void) { return NULL; } |
| |
| int SSL_COMP_add_compression_method(int id, void *cm) { return 1; } |
| |
| const char *SSL_COMP_get_name(const void *comp) { return NULL; } |
| |
| /* For a cipher return the index corresponding to the certificate type */ |
| int ssl_cipher_get_cert_index(const SSL_CIPHER *c) { |
| unsigned long alg_a = c->algorithm_auth; |
| |
| if (alg_a & SSL_aECDSA) { |
| return SSL_PKEY_ECC; |
| } else if (alg_a & SSL_aRSA) { |
| return SSL_PKEY_RSA_ENC; |
| } |
| |
| return -1; |
| } |
| |
| /* ssl_cipher_has_server_public_key returns 1 if |cipher| involves a server |
| * public key in the key exchange, sent in a server Certificate message. |
| * Otherwise it returns 0. */ |
| int ssl_cipher_has_server_public_key(const SSL_CIPHER *cipher) { |
| /* Anonymous ciphers do not include a server certificate. */ |
| if (cipher->algorithm_auth & SSL_aNULL) { |
| return 0; |
| } |
| |
| /* Neither do PSK ciphers, except for RSA_PSK. */ |
| if ((cipher->algorithm_auth & SSL_aPSK) && |
| !(cipher->algorithm_mkey & SSL_kRSA)) { |
| return 0; |
| } |
| |
| /* All other ciphers include it. */ |
| return 1; |
| } |
| |
| /* ssl_cipher_requires_server_key_exchange returns 1 if |cipher| requires a |
| * ServerKeyExchange message. Otherwise it returns 0. |
| * |
| * Unlike ssl_cipher_has_server_public_key, some ciphers take optional |
| * ServerKeyExchanges. PSK and RSA_PSK only use the ServerKeyExchange to |
| * communicate a psk_identity_hint, so it is optional. */ |
| int ssl_cipher_requires_server_key_exchange(const SSL_CIPHER *cipher) { |
| /* Ephemeral Diffie-Hellman key exchanges require a ServerKeyExchange. */ |
| if (cipher->algorithm_mkey & SSL_kEDH || cipher->algorithm_mkey & SSL_kEECDH) { |
| return 1; |
| } |
| |
| /* It is optional in all others. */ |
| return 0; |
| } |