| /* Copyright (c) 2019, Google Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ |
| |
| #ifndef OPENSSL_HEADER_TRUST_TOKEN_INTERNAL_H |
| #define OPENSSL_HEADER_TRUST_TOKEN_INTERNAL_H |
| |
| #include <openssl/base.h> |
| #include <openssl/ec.h> |
| #include <openssl/ec_key.h> |
| #include <openssl/nid.h> |
| |
| #include "../fipsmodule/ec/internal.h" |
| |
| #include <openssl/trust_token.h> |
| |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| |
| // For the following cryptographic schemes, we use P-384 instead of our usual |
| // choice of P-256. See Appendix I of |
| // https://eprint.iacr.org/2020/072/20200324:214215 which describes two attacks |
| // which may affect smaller curves. In particular, p-1 for P-256 is smooth, |
| // giving a low complexity for the p-1 attack. P-384's p-1 has a 281-bit prime |
| // factor, |
| // 3055465788140352002733946906144561090641249606160407884365391979704929268480326390471. |
| // This lower-bounds the p-1 attack at O(2^140). The p+1 attack is lower-bounded |
| // by O(p^(1/3)) or O(2^128), so we do not need to check the smoothness of p+1. |
| |
| |
| // TRUST_TOKEN_NONCE_SIZE is the size of nonces used as part of the Trust_Token |
| // protocol. |
| #define TRUST_TOKEN_NONCE_SIZE 64 |
| |
| typedef struct { |
| // TODO(https://crbug.com/boringssl/334): These should store |EC_PRECOMP| so |
| // that |TRUST_TOKEN_finish_issuance| can use |ec_point_mul_scalar_precomp|. |
| EC_AFFINE pub0; |
| EC_AFFINE pub1; |
| EC_AFFINE pubs; |
| } TRUST_TOKEN_CLIENT_KEY; |
| |
| typedef struct { |
| EC_SCALAR x0; |
| EC_SCALAR y0; |
| EC_SCALAR x1; |
| EC_SCALAR y1; |
| EC_SCALAR xs; |
| EC_SCALAR ys; |
| EC_AFFINE pub0; |
| EC_PRECOMP pub0_precomp; |
| EC_AFFINE pub1; |
| EC_PRECOMP pub1_precomp; |
| EC_AFFINE pubs; |
| EC_PRECOMP pubs_precomp; |
| } TRUST_TOKEN_ISSUER_KEY; |
| |
| // TRUST_TOKEN_PRETOKEN represents the intermediate state a client keeps during |
| // a Trust_Token issuance operation. |
| typedef struct pmb_pretoken_st { |
| uint8_t salt[TRUST_TOKEN_NONCE_SIZE]; |
| uint8_t t[TRUST_TOKEN_NONCE_SIZE]; |
| EC_SCALAR r; |
| EC_AFFINE Tp; |
| } TRUST_TOKEN_PRETOKEN; |
| |
| // TRUST_TOKEN_PRETOKEN_free releases the memory associated with |token|. |
| OPENSSL_EXPORT void TRUST_TOKEN_PRETOKEN_free(TRUST_TOKEN_PRETOKEN *token); |
| |
| DEFINE_STACK_OF(TRUST_TOKEN_PRETOKEN) |
| |
| |
| // PMBTokens. |
| // |
| // PMBTokens is described in https://eprint.iacr.org/2020/072/20200324:214215 |
| // and provides anonymous tokens with private metadata. We implement the |
| // construction with validity verification, described in appendix H, |
| // construction 6. |
| |
| // The following functions implement the corresponding |TRUST_TOKENS_METHOD| |
| // functions for |TRUST_TOKENS_experiment_v1|'s PMBTokens construction which |
| // uses P-384. |
| int pmbtoken_exp1_generate_key(CBB *out_private, CBB *out_public); |
| int pmbtoken_exp1_derive_key_from_secret(CBB *out_private, CBB *out_public, |
| const uint8_t *secret, |
| size_t secret_len); |
| int pmbtoken_exp1_client_key_from_bytes(TRUST_TOKEN_CLIENT_KEY *key, |
| const uint8_t *in, size_t len); |
| int pmbtoken_exp1_issuer_key_from_bytes(TRUST_TOKEN_ISSUER_KEY *key, |
| const uint8_t *in, size_t len); |
| STACK_OF(TRUST_TOKEN_PRETOKEN) *pmbtoken_exp1_blind(CBB *cbb, size_t count, |
| int include_message, |
| const uint8_t *msg, |
| size_t msg_len); |
| int pmbtoken_exp1_sign(const TRUST_TOKEN_ISSUER_KEY *key, CBB *cbb, CBS *cbs, |
| size_t num_requested, size_t num_to_issue, |
| uint8_t private_metadata); |
| STACK_OF(TRUST_TOKEN) *pmbtoken_exp1_unblind( |
| const TRUST_TOKEN_CLIENT_KEY *key, |
| const STACK_OF(TRUST_TOKEN_PRETOKEN) *pretokens, CBS *cbs, size_t count, |
| uint32_t key_id); |
| int pmbtoken_exp1_read(const TRUST_TOKEN_ISSUER_KEY *key, |
| uint8_t out_nonce[TRUST_TOKEN_NONCE_SIZE], |
| uint8_t *out_private_metadata, const uint8_t *token, |
| size_t token_len, int include_message, |
| const uint8_t *msg, size_t msg_len); |
| |
| // pmbtoken_exp1_get_h_for_testing returns H in uncompressed coordinates. This |
| // function is used to confirm H was computed as expected. |
| OPENSSL_EXPORT int pmbtoken_exp1_get_h_for_testing(uint8_t out[97]); |
| |
| // The following functions implement the corresponding |TRUST_TOKENS_METHOD| |
| // functions for |TRUST_TOKENS_experiment_v2|'s PMBTokens construction which |
| // uses P-384. |
| int pmbtoken_exp2_generate_key(CBB *out_private, CBB *out_public); |
| int pmbtoken_exp2_derive_key_from_secret(CBB *out_private, CBB *out_public, |
| const uint8_t *secret, |
| size_t secret_len); |
| int pmbtoken_exp2_client_key_from_bytes(TRUST_TOKEN_CLIENT_KEY *key, |
| const uint8_t *in, size_t len); |
| int pmbtoken_exp2_issuer_key_from_bytes(TRUST_TOKEN_ISSUER_KEY *key, |
| const uint8_t *in, size_t len); |
| STACK_OF(TRUST_TOKEN_PRETOKEN) *pmbtoken_exp2_blind(CBB *cbb, size_t count, |
| int include_message, |
| const uint8_t *msg, |
| size_t msg_len); |
| int pmbtoken_exp2_sign(const TRUST_TOKEN_ISSUER_KEY *key, CBB *cbb, CBS *cbs, |
| size_t num_requested, size_t num_to_issue, |
| uint8_t private_metadata); |
| STACK_OF(TRUST_TOKEN) *pmbtoken_exp2_unblind( |
| const TRUST_TOKEN_CLIENT_KEY *key, |
| const STACK_OF(TRUST_TOKEN_PRETOKEN) *pretokens, CBS *cbs, size_t count, |
| uint32_t key_id); |
| int pmbtoken_exp2_read(const TRUST_TOKEN_ISSUER_KEY *key, |
| uint8_t out_nonce[TRUST_TOKEN_NONCE_SIZE], |
| uint8_t *out_private_metadata, const uint8_t *token, |
| size_t token_len, int include_message, |
| const uint8_t *msg, size_t msg_len); |
| |
| // pmbtoken_exp2_get_h_for_testing returns H in uncompressed coordinates. This |
| // function is used to confirm H was computed as expected. |
| OPENSSL_EXPORT int pmbtoken_exp2_get_h_for_testing(uint8_t out[97]); |
| |
| |
| // VOPRF. |
| // |
| // VOPRFs are described in https://tools.ietf.org/html/draft-irtf-cfrg-voprf-04 |
| // and provide anonymous tokens. This implementation uses TrustToken DSTs and |
| // the DLEQ batching primitive from |
| // https://eprint.iacr.org/2020/072/20200324:214215. |
| // VOPRF only uses the |pub|' field of the TRUST_TOKEN_CLIENT_KEY and |
| // |xs|/|pubs| fields of the TRUST_TOKEN_ISSUER_KEY. |
| |
| // The following functions implement the corresponding |TRUST_TOKENS_METHOD| |
| // functions for |TRUST_TOKENS_experiment_v2|'s VOPRF construction which uses |
| // P-384. |
| int voprf_exp2_generate_key(CBB *out_private, CBB *out_public); |
| int voprf_exp2_derive_key_from_secret(CBB *out_private, CBB *out_public, |
| const uint8_t *secret, size_t secret_len); |
| int voprf_exp2_client_key_from_bytes(TRUST_TOKEN_CLIENT_KEY *key, |
| const uint8_t *in, size_t len); |
| int voprf_exp2_issuer_key_from_bytes(TRUST_TOKEN_ISSUER_KEY *key, |
| const uint8_t *in, size_t len); |
| STACK_OF(TRUST_TOKEN_PRETOKEN) *voprf_exp2_blind(CBB *cbb, size_t count, |
| int include_message, |
| const uint8_t *msg, |
| size_t msg_len); |
| int voprf_exp2_sign(const TRUST_TOKEN_ISSUER_KEY *key, CBB *cbb, CBS *cbs, |
| size_t num_requested, size_t num_to_issue, |
| uint8_t private_metadata); |
| STACK_OF(TRUST_TOKEN) *voprf_exp2_unblind( |
| const TRUST_TOKEN_CLIENT_KEY *key, |
| const STACK_OF(TRUST_TOKEN_PRETOKEN) *pretokens, CBS *cbs, size_t count, |
| uint32_t key_id); |
| int voprf_exp2_read(const TRUST_TOKEN_ISSUER_KEY *key, |
| uint8_t out_nonce[TRUST_TOKEN_NONCE_SIZE], |
| uint8_t *out_private_metadata, const uint8_t *token, |
| size_t token_len, int include_message, const uint8_t *msg, |
| size_t msg_len); |
| |
| |
| // Trust Tokens internals. |
| |
| struct trust_token_method_st { |
| // generate_key generates a fresh keypair and writes their serialized |
| // forms into |out_private| and |out_public|. It returns one on success and |
| // zero on failure. |
| int (*generate_key)(CBB *out_private, CBB *out_public); |
| |
| // derive_key_from_secret deterministically derives a keypair based on |
| // |secret| and writes their serialized forms into |out_private| and |
| // |out_public|. It returns one on success and zero on failure. |
| int (*derive_key_from_secret)(CBB *out_private, CBB *out_public, |
| const uint8_t *secret, size_t secret_len); |
| |
| // client_key_from_bytes decodes a client key from |in| and sets |key| |
| // to the resulting key. It returns one on success and zero |
| // on failure. |
| int (*client_key_from_bytes)(TRUST_TOKEN_CLIENT_KEY *key, const uint8_t *in, |
| size_t len); |
| |
| // issuer_key_from_bytes decodes a issuer key from |in| and sets |key| |
| // to the resulting key. It returns one on success and zero |
| // on failure. |
| int (*issuer_key_from_bytes)(TRUST_TOKEN_ISSUER_KEY *key, const uint8_t *in, |
| size_t len); |
| |
| // blind generates a new issuance request for |count| tokens. If |
| // |include_message| is set, then |msg| is used to derive the token nonces. On |
| // success, it returns a newly-allocated |STACK_OF(TRUST_TOKEN_PRETOKEN)| and |
| // writes a request to the issuer to |cbb|. On failure, it returns NULL. The |
| // |STACK_OF(TRUST_TOKEN_PRETOKEN)|s should be passed to |pmbtoken_unblind| |
| // when the server responds. |
| // |
| // This function implements the AT.Usr0 operation. |
| STACK_OF(TRUST_TOKEN_PRETOKEN) *(*blind)(CBB *cbb, size_t count, |
| int include_message, |
| const uint8_t *msg, size_t msg_len); |
| |
| // sign parses a request for |num_requested| tokens from |cbs| and |
| // issues |num_to_issue| tokens with |key| and a private metadata value of |
| // |private_metadata|. It then writes the response to |cbb|. It returns one on |
| // success and zero on failure. |
| // |
| // This function implements the AT.Sig operation. |
| int (*sign)(const TRUST_TOKEN_ISSUER_KEY *key, CBB *cbb, CBS *cbs, |
| size_t num_requested, size_t num_to_issue, |
| uint8_t private_metadata); |
| |
| // unblind processes an issuance response for |count| tokens from |cbs| |
| // and unblinds the signed tokens. |pretokens| are the pre-tokens returned |
| // from the corresponding |blind| call. On success, the function returns a |
| // newly-allocated |STACK_OF(TRUST_TOKEN)| containing the resulting tokens. |
| // Each token's serialization will have |key_id| prepended. Otherwise, it |
| // returns NULL. |
| // |
| // This function implements the AT.Usr1 operation. |
| STACK_OF(TRUST_TOKEN) *(*unblind)( |
| const TRUST_TOKEN_CLIENT_KEY *key, |
| const STACK_OF(TRUST_TOKEN_PRETOKEN) *pretokens, CBS *cbs, size_t count, |
| uint32_t key_id); |
| |
| // read parses a token from |token| and verifies it using |key|. If |
| // |include_message| is set, then the nonce is derived from |msg| and the salt |
| // in the token. On success, it returns one and stores the nonce and private |
| // metadata bit in |out_nonce| and |*out_private_metadata|. Otherwise, it |
| // returns zero. Note that, unlike the output of |unblind|, |token| does not |
| // have a four-byte key ID prepended. |
| int (*read)(const TRUST_TOKEN_ISSUER_KEY *key, |
| uint8_t out_nonce[TRUST_TOKEN_NONCE_SIZE], |
| uint8_t *out_private_metadata, const uint8_t *token, |
| size_t token_len, int include_message, const uint8_t *msg, |
| size_t msg_len); |
| |
| // whether the construction supports private metadata. |
| int has_private_metadata; |
| |
| // max keys that can be configured. |
| size_t max_keys; |
| |
| // whether the SRR is part of the protocol. |
| int has_srr; |
| }; |
| |
| // Structure representing a single Trust Token public key with the specified ID. |
| struct trust_token_client_key_st { |
| uint32_t id; |
| TRUST_TOKEN_CLIENT_KEY key; |
| }; |
| |
| // Structure representing a single Trust Token private key with the specified |
| // ID. |
| struct trust_token_issuer_key_st { |
| uint32_t id; |
| TRUST_TOKEN_ISSUER_KEY key; |
| }; |
| |
| struct trust_token_client_st { |
| const TRUST_TOKEN_METHOD *method; |
| |
| // max_batchsize is the maximum supported batchsize. |
| uint16_t max_batchsize; |
| |
| // keys is the set of public keys that are supported by the client for |
| // issuance/redemptions. |
| struct trust_token_client_key_st keys[6]; |
| |
| // num_keys is the number of keys currently configured. |
| size_t num_keys; |
| |
| // pretokens is the intermediate state during an active issuance. |
| STACK_OF(TRUST_TOKEN_PRETOKEN) *pretokens; |
| |
| // srr_key is the public key used to verify the signature of the SRR. |
| EVP_PKEY *srr_key; |
| }; |
| |
| |
| struct trust_token_issuer_st { |
| const TRUST_TOKEN_METHOD *method; |
| |
| // max_batchsize is the maximum supported batchsize. |
| uint16_t max_batchsize; |
| |
| // keys is the set of private keys that are supported by the issuer for |
| // issuance/redemptions. The public metadata is an index into this list of |
| // keys. |
| struct trust_token_issuer_key_st keys[6]; |
| |
| // num_keys is the number of keys currently configured. |
| size_t num_keys; |
| |
| // srr_key is the private key used to sign the SRR. |
| EVP_PKEY *srr_key; |
| |
| // metadata_key is the secret material used to encode the private metadata bit |
| // in the SRR. |
| uint8_t *metadata_key; |
| size_t metadata_key_len; |
| }; |
| |
| |
| #if defined(__cplusplus) |
| } // extern C |
| |
| extern "C++" { |
| |
| BSSL_NAMESPACE_BEGIN |
| |
| BORINGSSL_MAKE_DELETER(TRUST_TOKEN_PRETOKEN, TRUST_TOKEN_PRETOKEN_free) |
| |
| BSSL_NAMESPACE_END |
| |
| } // extern C++ |
| #endif |
| |
| #endif // OPENSSL_HEADER_TRUST_TOKEN_INTERNAL_H |