| // Copyright 2024 The BoringSSL Authors | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #ifndef OPENSSL_HEADER_MLKEM_H | |
| #define OPENSSL_HEADER_MLKEM_H | |
| #include <openssl/base.h> // IWYU pragma: export | |
| #if defined(__cplusplus) | |
| extern "C" { | |
| #endif | |
| // ML-KEM-768. | |
| // | |
| // This implements the Module-Lattice-Based Key-Encapsulation Mechanism from | |
| // https://csrc.nist.gov/pubs/fips/204/final | |
| // MLKEM768_public_key contains an ML-KEM-768 public key. The contents of this | |
| // object should never leave the address space since the format is unstable. | |
| struct MLKEM768_public_key { | |
| union { | |
| uint8_t bytes[512 * (3 + 9) + 32 + 32]; | |
| uint16_t alignment; | |
| } opaque; | |
| }; | |
| // MLKEM768_private_key contains an ML-KEM-768 private key. The contents of this | |
| // object should never leave the address space since the format is unstable. | |
| struct MLKEM768_private_key { | |
| union { | |
| uint8_t bytes[512 * (3 + 3 + 9) + 32 + 32 + 32]; | |
| uint16_t alignment; | |
| } opaque; | |
| }; | |
| // MLKEM768_PUBLIC_KEY_BYTES is the number of bytes in an encoded ML-KEM-768 | |
| // public key. | |
| #define MLKEM768_PUBLIC_KEY_BYTES 1184 | |
| // MLKEM_SEED_BYTES is the number of bytes in an ML-KEM seed. | |
| #define MLKEM_SEED_BYTES 64 | |
| // MLKEM768_generate_key generates a random public/private key pair, writes the | |
| // encoded public key to |out_encoded_public_key| and sets |out_private_key| to | |
| // the private key. If |optional_out_seed| is not NULL then the seed used to | |
| // generate the private key is written to it. | |
| OPENSSL_EXPORT void MLKEM768_generate_key( | |
| uint8_t out_encoded_public_key[MLKEM768_PUBLIC_KEY_BYTES], | |
| uint8_t optional_out_seed[MLKEM_SEED_BYTES], | |
| struct MLKEM768_private_key *out_private_key); | |
| // MLKEM768_private_key_from_seed derives a private key from a seed that was | |
| // generated by |MLKEM768_generate_key|. It fails and returns 0 if |seed_len| is | |
| // incorrect, otherwise it writes |*out_private_key| and returns 1. | |
| OPENSSL_EXPORT int MLKEM768_private_key_from_seed( | |
| struct MLKEM768_private_key *out_private_key, const uint8_t *seed, | |
| size_t seed_len); | |
| // MLKEM768_public_from_private sets |*out_public_key| to the public key that | |
| // corresponds to |private_key|. (This is faster than parsing the output of | |
| // |MLKEM768_generate_key| if, for some reason, you need to encapsulate to a key | |
| // that was just generated.) | |
| OPENSSL_EXPORT void MLKEM768_public_from_private( | |
| struct MLKEM768_public_key *out_public_key, | |
| const struct MLKEM768_private_key *private_key); | |
| // MLKEM768_CIPHERTEXT_BYTES is number of bytes in the ML-KEM-768 ciphertext. | |
| #define MLKEM768_CIPHERTEXT_BYTES 1088 | |
| // MLKEM_SHARED_SECRET_BYTES is the number of bytes in an ML-KEM shared secret. | |
| #define MLKEM_SHARED_SECRET_BYTES 32 | |
| // MLKEM768_encap encrypts a random shared secret for |public_key|, writes the | |
| // ciphertext to |out_ciphertext|, and writes the random shared secret to | |
| // |out_shared_secret|. | |
| OPENSSL_EXPORT void MLKEM768_encap( | |
| uint8_t out_ciphertext[MLKEM768_CIPHERTEXT_BYTES], | |
| uint8_t out_shared_secret[MLKEM_SHARED_SECRET_BYTES], | |
| const struct MLKEM768_public_key *public_key); | |
| // MLKEM768_decap decrypts a shared secret from |ciphertext| using |private_key| | |
| // and writes it to |out_shared_secret|. If |ciphertext_len| is incorrect it | |
| // returns 0, otherwise it returns 1. If |ciphertext| is invalid (but of the | |
| // correct length), |out_shared_secret| is filled with a key that will always be | |
| // the same for the same |ciphertext| and |private_key|, but which appears to be | |
| // random unless one has access to |private_key|. These alternatives occur in | |
| // constant time. Any subsequent symmetric encryption using |out_shared_secret| | |
| // must use an authenticated encryption scheme in order to discover the | |
| // decapsulation failure. | |
| OPENSSL_EXPORT int MLKEM768_decap( | |
| uint8_t out_shared_secret[MLKEM_SHARED_SECRET_BYTES], | |
| const uint8_t *ciphertext, size_t ciphertext_len, | |
| const struct MLKEM768_private_key *private_key); | |
| // Serialisation of keys. | |
| // MLKEM768_marshal_public_key serializes |public_key| to |out| in the standard | |
| // format for ML-KEM-768 public keys. It returns one on success or zero on | |
| // allocation error. | |
| OPENSSL_EXPORT int MLKEM768_marshal_public_key( | |
| CBB *out, const struct MLKEM768_public_key *public_key); | |
| // MLKEM768_parse_public_key parses a public key, in the format generated by | |
| // |MLKEM768_marshal_public_key|, from |in| and writes the result to | |
| // |out_public_key|. It returns one on success or zero on parse error or if | |
| // there are trailing bytes in |in|. | |
| OPENSSL_EXPORT int MLKEM768_parse_public_key( | |
| struct MLKEM768_public_key *out_public_key, CBS *in); | |
| // ML-KEM-1024 | |
| // | |
| // ML-KEM-1024 also exists. You should prefer ML-KEM-768 where possible. | |
| // MLKEM1024_public_key contains an ML-KEM-1024 public key. The contents of this | |
| // object should never leave the address space since the format is unstable. | |
| struct MLKEM1024_public_key { | |
| union { | |
| uint8_t bytes[512 * (4 + 16) + 32 + 32]; | |
| uint16_t alignment; | |
| } opaque; | |
| }; | |
| // MLKEM1024_private_key contains a ML-KEM-1024 private key. The contents of | |
| // this object should never leave the address space since the format is | |
| // unstable. | |
| struct MLKEM1024_private_key { | |
| union { | |
| uint8_t bytes[512 * (4 + 4 + 16) + 32 + 32 + 32]; | |
| uint16_t alignment; | |
| } opaque; | |
| }; | |
| // MLKEM1024_PUBLIC_KEY_BYTES is the number of bytes in an encoded ML-KEM-1024 | |
| // public key. | |
| #define MLKEM1024_PUBLIC_KEY_BYTES 1568 | |
| // MLKEM1024_generate_key generates a random public/private key pair, writes the | |
| // encoded public key to |out_encoded_public_key| and sets |out_private_key| to | |
| // the private key. If |optional_out_seed| is not NULL then the seed used to | |
| // generate the private key is written to it. | |
| OPENSSL_EXPORT void MLKEM1024_generate_key( | |
| uint8_t out_encoded_public_key[MLKEM1024_PUBLIC_KEY_BYTES], | |
| uint8_t optional_out_seed[MLKEM_SEED_BYTES], | |
| struct MLKEM1024_private_key *out_private_key); | |
| // MLKEM1024_private_key_from_seed derives a private key from a seed that was | |
| // generated by |MLKEM1024_generate_key|. It fails and returns 0 if |seed_len| | |
| // is incorrect, otherwise it writes |*out_private_key| and returns 1. | |
| OPENSSL_EXPORT int MLKEM1024_private_key_from_seed( | |
| struct MLKEM1024_private_key *out_private_key, const uint8_t *seed, | |
| size_t seed_len); | |
| // MLKEM1024_public_from_private sets |*out_public_key| to the public key that | |
| // corresponds to |private_key|. (This is faster than parsing the output of | |
| // |MLKEM1024_generate_key| if, for some reason, you need to encapsulate to a | |
| // key that was just generated.) | |
| OPENSSL_EXPORT void MLKEM1024_public_from_private( | |
| struct MLKEM1024_public_key *out_public_key, | |
| const struct MLKEM1024_private_key *private_key); | |
| // MLKEM1024_CIPHERTEXT_BYTES is number of bytes in the ML-KEM-1024 ciphertext. | |
| #define MLKEM1024_CIPHERTEXT_BYTES 1568 | |
| // MLKEM1024_encap encrypts a random shared secret for |public_key|, writes the | |
| // ciphertext to |out_ciphertext|, and writes the random shared secret to | |
| // |out_shared_secret|. | |
| OPENSSL_EXPORT void MLKEM1024_encap( | |
| uint8_t out_ciphertext[MLKEM1024_CIPHERTEXT_BYTES], | |
| uint8_t out_shared_secret[MLKEM_SHARED_SECRET_BYTES], | |
| const struct MLKEM1024_public_key *public_key); | |
| // MLKEM1024_decap decrypts a shared secret from |ciphertext| using | |
| // |private_key| and writes it to |out_shared_secret|. If |ciphertext_len| is | |
| // incorrect it returns 0, otherwise it returns 1. If |ciphertext| is invalid | |
| // (but of the correct length), |out_shared_secret| is filled with a key that | |
| // will always be the same for the same |ciphertext| and |private_key|, but | |
| // which appears to be random unless one has access to |private_key|. These | |
| // alternatives occur in constant time. Any subsequent symmetric encryption | |
| // using |out_shared_secret| must use an authenticated encryption scheme in | |
| // order to discover the decapsulation failure. | |
| OPENSSL_EXPORT int MLKEM1024_decap( | |
| uint8_t out_shared_secret[MLKEM_SHARED_SECRET_BYTES], | |
| const uint8_t *ciphertext, size_t ciphertext_len, | |
| const struct MLKEM1024_private_key *private_key); | |
| // Serialisation of ML-KEM-1024 keys. | |
| // MLKEM1024_marshal_public_key serializes |public_key| to |out| in the standard | |
| // format for ML-KEM-1024 public keys. It returns one on success or zero on | |
| // allocation error. | |
| OPENSSL_EXPORT int MLKEM1024_marshal_public_key( | |
| CBB *out, const struct MLKEM1024_public_key *public_key); | |
| // MLKEM1024_parse_public_key parses a public key, in the format generated by | |
| // |MLKEM1024_marshal_public_key|, from |in| and writes the result to | |
| // |out_public_key|. It returns one on success or zero on parse error or if | |
| // there are trailing bytes in |in|. | |
| OPENSSL_EXPORT int MLKEM1024_parse_public_key( | |
| struct MLKEM1024_public_key *out_public_key, CBS *in); | |
| #if defined(__cplusplus) | |
| } // extern C | |
| #endif | |
| #endif // OPENSSL_HEADER_MLKEM_H |