| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] */ |
| |
| #ifndef OPENSSL_HEADER_BIO_H |
| #define OPENSSL_HEADER_BIO_H |
| |
| #include <openssl/base.h> |
| |
| #include <stdarg.h> |
| #include <stdio.h> /* For FILE */ |
| |
| #include <openssl/ex_data.h> |
| #include <openssl/stack.h> |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| |
| /* BIO abstracts over a file-descriptor like interface. */ |
| |
| |
| /* Allocation and freeing. */ |
| |
| DEFINE_STACK_OF(BIO); |
| |
| /* BIO_new creates a new BIO with the given type and a reference count of one. |
| * It returns the fresh |BIO|, or NULL on error. */ |
| BIO *BIO_new(const BIO_METHOD *type); |
| |
| /* BIO_free decrements the reference count of |bio|. If the reference count |
| * drops to zero, it (optionally) calls the BIO's callback with |BIO_CB_FREE|, |
| * frees the ex_data and then, if the BIO has a destroy callback for the |
| * method, calls it. Finally it frees |bio| itself. It then repeats that for |
| * the next BIO in the chain, if any. |
| * |
| * It returns one on success or zero otherwise. */ |
| int BIO_free(BIO *bio); |
| |
| /* BIO_vfree performs the same actions as |BIO_free|, but has a void return |
| * value. This is provided for API-compat. |
| * |
| * TODO(fork): remove. */ |
| void BIO_vfree(BIO *bio); |
| |
| |
| /* Basic I/O. */ |
| |
| /* BIO_read attempts to read |len| bytes into |data|. It returns the number of |
| * bytes read, zero on EOF, or a negative number on error. */ |
| int BIO_read(BIO *bio, void *data, int len); |
| |
| /* BIO_gets "reads a line" from |bio| and puts at most |size| bytes into |buf|. |
| * It returns the number of bytes read or a negative number on error. The |
| * phrase "reads a line" is in quotes in the previous sentence because the |
| * exact operation depends on the BIO's method. For example, a digest BIO will |
| * return the digest in response to a |BIO_gets| call. |
| * |
| * TODO(fork): audit the set of BIOs that we end up needing. If all actually |
| * return a line for this call, remove the warning above. */ |
| int BIO_gets(BIO *bio, char *buf, int size); |
| |
| /* BIO_write writes |len| bytes from |data| to BIO. It returns the number of |
| * bytes written or a negative number on error. */ |
| int BIO_write(BIO *bio, const void *data, int len); |
| |
| /* BIO_puts writes a NUL terminated string from |buf| to |bio|. It returns the |
| * number of bytes written or a negative number on error. */ |
| int BIO_puts(BIO *bio, const char *buf); |
| |
| /* BIO_flush flushes any buffered output. It returns one on success and zero |
| * otherwise. */ |
| int BIO_flush(BIO *bio); |
| |
| |
| /* Low-level control functions. |
| * |
| * These are generic functions for sending control requests to a BIO. In |
| * general one should use the wrapper functions like |BIO_get_close|. */ |
| |
| /* BIO_ctrl sends the control request |cmd| to |bio|. The |cmd| argument should |
| * be one of the |BIO_C_*| values. */ |
| long BIO_ctrl(BIO *bio, int cmd, long larg, void *parg); |
| |
| /* BIO_ptr_ctrl acts like |BIO_ctrl| but passes the address of a |void*| |
| * pointer as |parg| and returns the value that is written to it, or NULL if |
| * the control request returns <= 0. */ |
| char *BIO_ptr_ctrl(BIO *bp, int cmd, long larg); |
| |
| /* BIO_int_ctrl acts like |BIO_ctrl| but passes the address of a copy of |iarg| |
| * as |parg|. */ |
| long BIO_int_ctrl(BIO *bp, int cmd, long larg, int iarg); |
| |
| /* BIO_reset resets |bio| to its initial state, the precise meaning of which |
| * depends on the concrete type of |bio|. It returns one on success and zero |
| * otherwise. */ |
| int BIO_reset(BIO *bio); |
| |
| /* BIO_set_flags ORs |flags| with |bio->flags|. */ |
| void BIO_set_flags(BIO *bio, int flags); |
| |
| /* BIO_test_flags returns |bio->flags| AND |flags|. */ |
| int BIO_test_flags(const BIO *bio, int flags); |
| |
| /* BIO_should_read returns non-zero if |bio| encountered a temporary error |
| * while reading (i.e. EAGAIN), indicating that the caller should retry the |
| * read. */ |
| int BIO_should_read(const BIO *bio); |
| |
| /* BIO_should_write returns non-zero if |bio| encountered a temporary error |
| * while writing (i.e. EAGAIN), indicating that the caller should retry the |
| * write. */ |
| int BIO_should_write(const BIO *bio); |
| |
| /* BIO_should_retry returns non-zero if the reason that caused a failed I/O |
| * operation is temporary and thus the operation should be retried. Otherwise, |
| * it was a permanent error and it returns zero. */ |
| int BIO_should_retry(const BIO *bio); |
| |
| /* BIO_should_io_special returns non-zero if |bio| encountered a temporary |
| * error while performing a special I/O operation, indicating that the caller |
| * should retry. The operation that caused the error is returned by |
| * |BIO_get_retry_reason|. */ |
| int BIO_should_io_special(const BIO *bio); |
| |
| /* BIO_RR_SSL_X509_LOOKUP indicates that an SSL BIO blocked because the SSL |
| * library returned with SSL_ERROR_WANT_X509_LOOKUP. |
| * |
| * TODO(fork): remove. */ |
| #define BIO_RR_SSL_X509_LOOKUP 0x01 |
| |
| /* BIO_RR_CONNECT indicates that a connect would have blocked */ |
| #define BIO_RR_CONNECT 0x02 |
| |
| /* BIO_RR_ACCEPT indicates that an accept would have blocked */ |
| #define BIO_RR_ACCEPT 0x03 |
| |
| /* BIO_RR_SSL_CHANNEL_ID_LOOKUP indicates that the ChannelID code cannot find |
| * a private key for a TLS connection. */ |
| #define BIO_RR_SSL_CHANNEL_ID_LOOKUP 0x04 |
| |
| /* BIO_get_retry_reason returns the special I/O operation that needs to be |
| * retried. The return value is one of the |BIO_RR_*| values. */ |
| int BIO_get_retry_reason(const BIO *bio); |
| |
| /* BIO_clear_flags ANDs |bio->flags| with the bitwise-complement of |flags|. */ |
| void BIO_clear_flags(BIO *bio, int flags); |
| |
| /* BIO_set_retry_read sets the |BIO_FLAGS_READ| and |BIO_FLAGS_SHOULD_RETRY| |
| * flags on |bio|. */ |
| void BIO_set_retry_read(BIO *bio); |
| |
| /* BIO_set_retry_read sets the |BIO_FLAGS_WRITE| and |BIO_FLAGS_SHOULD_RETRY| |
| * flags on |bio|. */ |
| void BIO_set_retry_write(BIO *bio); |
| |
| /* BIO_get_retry_flags gets the |BIO_FLAGS_READ|, |BIO_FLAGS_WRITE|, |
| * |BIO_FLAGS_IO_SPECIAL| and |BIO_FLAGS_SHOULD_RETRY| flags from |bio|. */ |
| int BIO_get_retry_flags(BIO *bio); |
| |
| /* BIO_clear_retry_flags clears the |BIO_FLAGS_READ|, |BIO_FLAGS_WRITE|, |
| * |BIO_FLAGS_IO_SPECIAL| and |BIO_FLAGS_SHOULD_RETRY| flags from |bio|. */ |
| void BIO_clear_retry_flags(BIO *bio); |
| |
| /* BIO_method_type returns the type of |bio|, which is one of the |BIO_TYPE_*| |
| * values. */ |
| int BIO_method_type(const BIO *bio); |
| |
| /* bio_info_cb is the type of a callback function that can be called for most |
| * BIO operations. The |event| argument is one of |BIO_CB_*| and can be ORed |
| * with |BIO_CB_RETURN| if the callback is being made after the operation in |
| * question. In that case, |return_value| will contain the return value from |
| * the operation. */ |
| typedef long (*bio_info_cb)(BIO *bio, int event, const char *parg, int cmd, |
| long larg, long return_value); |
| |
| /* BIO_callback_ctrl allows the callback function to be manipulated. The |cmd| |
| * arg will generally be |BIO_CTRL_SET_CALLBACK| but arbitary command values |
| * can be interpreted by the |BIO|. */ |
| long BIO_callback_ctrl(BIO *bio, int cmd, bio_info_cb fp); |
| |
| /* BIO_pending returns the number of bytes pending to be read. */ |
| size_t BIO_pending(const BIO *bio); |
| |
| /* BIO_wpending returns the number of bytes pending to be written. */ |
| size_t BIO_wpending(const BIO *bio); |
| |
| /* BIO_set_close sets the close flag for |bio|. The meaning of which depends on |
| * the type of |bio| but, for example, a memory BIO interprets the close flag |
| * as meaning that it owns its buffer. It returns one on success and zero |
| * otherwise. */ |
| int BIO_set_close(BIO *bio, int close_flag); |
| |
| |
| /* Managing chains of BIOs. |
| * |
| * BIOs can be put into chains where the output of one is used as the input of |
| * the next etc. The most common case is a buffering BIO, which accepts and |
| * buffers writes until flushed into the next BIO in the chain. */ |
| |
| /* BIO_push adds |appended_bio| to the end of the chain with |bio| at the head. |
| * It returns |bio|. Note that |appended_bio| may be the head of a chain itself |
| * and thus this function can be used to join two chains. |
| * |
| * BIO_push takes ownership of the caller's reference to |appended_bio|. */ |
| BIO *BIO_push(BIO *bio, BIO *appended_bio); |
| |
| /* BIO_pop removes |bio| from the head of a chain and returns the next BIO in |
| * the chain, or NULL if there is no next BIO. |
| * |
| * The caller takes ownership of the chain's reference to |bio|. */ |
| BIO *BIO_pop(BIO *bio); |
| |
| /* BIO_next returns the next BIO in the chain after |bio|, or NULL if there is |
| * no such BIO. */ |
| BIO *BIO_next(BIO *bio); |
| |
| /* BIO_free_all calls |BIO_free|. |
| * |
| * TODO(fork): update callers and remove. */ |
| void BIO_free_all(BIO *bio); |
| |
| /* BIO_find_type walks a chain of BIOs and returns the first that matches |
| * |type|, which is one of the |BIO_TYPE_*| values. */ |
| BIO *BIO_find_type(BIO *bio, int type); |
| |
| /* BIO_copy_next_retry sets the retry flags and |retry_reason| of |bio| from |
| * the next BIO in the chain. */ |
| void BIO_copy_next_retry(BIO *bio); |
| |
| |
| /* Printf functions. |
| * |
| * These functions are versions of printf functions that output to a BIO rather |
| * than a FILE. */ |
| #ifdef __GNUC__ |
| #define __bio_h__attr__ __attribute__ |
| #else |
| #define __bio_h__attr__(x) |
| #endif |
| int BIO_printf(BIO *bio, const char *format, ...) |
| __bio_h__attr__((__format__(__printf__, 2, 3))); |
| |
| int BIO_vprintf(BIO *bio, const char *format, va_list args) |
| __bio_h__attr__((__format__(__printf__, 2, 0))); |
| #undef __bio_h__attr__ |
| |
| |
| /* Utility functions. */ |
| |
| /* BIO_indent prints min(|indent|, |max_indent|) spaces. It returns one on |
| * success and zero otherwise. */ |
| int BIO_indent(BIO *bio, unsigned indent, unsigned max_indent); |
| |
| /* BIO_hexdump writes a hex dump of |data| to |bio|. Each line will be indented |
| * by |indent| spaces. */ |
| int BIO_hexdump(BIO *bio, const uint8_t *data, size_t len, unsigned indent); |
| |
| /* BIO_print_errors_fp prints the current contents of the error stack to |out| |
| * using human readable strings where possible. */ |
| void BIO_print_errors_fp(FILE *out); |
| |
| /* BIO_print_errors prints the current contents of the error stack to |bio| |
| * using human readable strings where possible. */ |
| void BIO_print_errors(BIO *bio); |
| |
| |
| /* Memory BIOs. |
| * |
| * Memory BIOs can be used as a read-only source (with |BIO_new_mem_buf|) or a |
| * writable sink (with |BIO_new|, |BIO_s_mem| and |BIO_get_mem_buf|). Data |
| * written to a writable, memory BIO can be recalled by reading from it. |
| * |
| * Calling |BIO_reset| on a read-only BIO resets it to the original contents. |
| * On a writable BIO, it clears any data. |
| * |
| * If the close flag is set to |BIO_NOCLOSE| (not the default) then the |
| * underlying |BUF_MEM| will not be freed when the |BIO| is freed. |
| * |
| * Memory BIOs support |BIO_gets| and |BIO_puts|. |
| * |
| * |BIO_eof| is true if no data is in the BIO. |
| * |
| * |BIO_ctrl_pending| returns the number of bytes currently stored. */ |
| |
| /* BIO_s_mem returns a |BIO_METHOD| that uses a in-memory buffer. */ |
| const BIO_METHOD *BIO_s_mem(void); |
| |
| /* BIO_new_mem_buf creates BIO that reads and writes from |len| bytes at |buf|. |
| * It does not take ownership of |buf|. It returns the BIO or NULL on error. |
| * |
| * If |len| is negative, then |buf| is treated as a NUL-terminated string, but |
| * don't depend on this in new code. */ |
| BIO *BIO_new_mem_buf(void *buf, int len); |
| |
| /* BIO_get_mem_data sets |*contents| to point to the current contents of |bio| |
| * and returns the length of the data. */ |
| long BIO_get_mem_data(BIO *bio, char **contents); |
| |
| /* BIO_get_mem_ptr sets |*out| to a BUF_MEM containing the current contents of |
| * |bio|. It returns one on success or zero on error. */ |
| int BIO_get_mem_ptr(BIO *bio, BUF_MEM **out); |
| |
| /* BIO_set_mem_buf sets |b| as the contents of |bio|. If |take_ownership| is |
| * non-zero, then |b| will be freed when |bio| is closed. Returns one on |
| * success or zero otherwise. */ |
| int BIO_set_mem_buf(BIO *bio, BUF_MEM *b, int take_ownership); |
| |
| /* BIO_set_mem_eof_return sets the value that will be returned from reading |
| * |bio| when empty. If |eof_value| is zero then an empty memory BIO will |
| * return EOF (that is it will return zero and |BIO_should_retry| will be |
| * false). If |eof_value| is non zero then it will return |eof_value| when it |
| * is empty and it will set the read retry flag (that is |BIO_read_retry| is |
| * true). To avoid ambiguity with a normal positive return value, |eof_value| |
| * should be set to a negative value, typically -1. |
| * |
| * For a read-only BIO, the default is zero (EOF). For a writable BIO, the |
| * default is -1 so that additional data can be written once exhausted. */ |
| int BIO_set_mem_eof_return(BIO *bio, int eof_value); |
| |
| |
| /* File descriptor BIOs. |
| * |
| * File descriptor BIOs are wrappers around the system's |read| and |write| |
| * functions. If the close flag is set then then |close| is called on the |
| * underlying file descriptor when the BIO is freed. |
| * |
| * |BIO_reset| attempts to seek the file pointer to the start of file using |
| * |lseek|. |
| * |
| * |BIO_seek| sets the file pointer to position |off| from start of file using |
| * |lseek|. |
| * |
| * |BIO_tell| returns the current file position. */ |
| |
| /* BIO_s_fd returns a |BIO_METHOD| for file descriptor fds. */ |
| const BIO_METHOD *BIO_s_fd(void); |
| |
| /* BIO_new_fd creates a new file descriptor BIO wrapping |fd|. If |close_flag| |
| * is non-zero, then |fd| will be closed when the BIO is. */ |
| BIO *BIO_new_fd(int fd, int close_flag); |
| |
| /* BIO_set_fd sets the file descriptor of |bio| to |fd|. If |close_flag| is |
| * non-zero then |fd| will be closed when |bio| is. It returns one on success |
| * or zero on error. */ |
| int BIO_set_fd(BIO *bio, int fd, int close_flag); |
| |
| /* BIO_get_fd sets |*out_fd| to the file descriptor currently in use by |bio|. |
| * It returns one on success and zero on error. */ |
| int BIO_get_fd(BIO *bio, int *out_fd); |
| |
| |
| /* File BIOs. |
| * |
| * File BIOs are wrappers around a C |FILE| object. |
| * |
| * |BIO_flush| on a file BIO calls |fflush| on the wrapped stream. |
| * |
| * |BIO_reset| attempts to seek the file pointer to the start of file using |
| * |fseek|. |
| * |
| * |BIO_seek| sets the file pointer to the given position from the start of |
| * file using |fseek|. |
| * |
| * |BIO_eof| calls |feof|. |
| * |
| * Setting the close flag causes |fclose| to be called on the stream when the |
| * BIO is freed. */ |
| |
| /* BIO_s_file returns a BIO_METHOD that wraps a |FILE|. */ |
| const BIO_METHOD *BIO_s_file(void); |
| |
| /* BIO_new_file creates a file BIO by opening |filename| with the given mode. |
| * See the |fopen| manual page for details of the mode argument. */ |
| BIO *BIO_new_file(const char *filename, const char *mode); |
| |
| /* BIO_new_fp creates a new file BIO that wraps the given |FILE|. If |
| * |close_flag| is |BIO_CLOSE|, then |fclose| will be called on |stream| when |
| * the BIO is closed. */ |
| BIO *BIO_new_fp(FILE *stream, int close_flag); |
| |
| /* BIO_get_fp sets |*out_file| to the current |FILE| for |bio|. It returns one |
| * on success and zero otherwise. */ |
| int BIO_get_fp(BIO *bio, FILE **out_file); |
| |
| /* BIO_set_fp sets the |FILE| for |bio|. If |close_flag| is |BIO_CLOSE| then |
| * |fclose| will be called on |file| when |bio| is closed. It returns one on |
| * sucess and zero otherwise. */ |
| int BIO_set_fp(BIO *bio, FILE *file, int close_flag); |
| |
| /* BIO_read_filename opens |filename| for reading and sets the result as the |
| * |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE| |
| * will be closed when |bio| is freed. */ |
| int BIO_read_filename(BIO *bio, const char *filename); |
| |
| /* BIO_write_filename opens |filename| for writing and sets the result as the |
| * |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE| |
| * will be closed when |bio| is freed. */ |
| int BIO_write_filename(BIO *bio, const char *filename); |
| |
| /* BIO_append_filename opens |filename| for appending and sets the result as |
| * the |FILE| for |bio|. It returns one on success and zero otherwise. The |
| * |FILE| will be closed when |bio| is freed. */ |
| int BIO_append_filename(BIO *bio, const char *filename); |
| |
| /* BIO_rw_filename opens |filename| for reading and writing and sets the result |
| * as the |FILE| for |bio|. It returns one on success and zero otherwise. The |
| * |FILE| will be closed when |bio| is freed. */ |
| int BIO_rw_filename(BIO *bio, const char *filename); |
| |
| |
| /* Buffer BIOs. |
| * |
| * Buffer BIOs are a filter-type BIO, i.e. they are designed to be used in a |
| * chain of BIOs. They provide buffering to reduce the number of operations on |
| * the underlying BIOs. */ |
| |
| const BIO_METHOD *BIO_f_buffer(void); |
| |
| /* BIO_set_read_buffer_size sets the size, in bytes, of the read buffer and |
| * clears it. It returns one on success and zero on failure. */ |
| int BIO_set_read_buffer_size(BIO *bio, int buffer_size); |
| |
| /* BIO_set_write_buffer_size sets the size, in bytes, of the write buffer and |
| * clears it. It returns one on success and zero on failure. */ |
| int BIO_set_write_buffer_size(BIO *bio, int buffer_size); |
| |
| |
| /* Socket BIOs. */ |
| |
| const BIO_METHOD *BIO_s_socket(void); |
| |
| /* BIO_new_socket allocates and initialises a fresh BIO which will read and |
| * write to the socket |fd|. If |close_flag| is |BIO_CLOSE| then closing the |
| * BIO will close |fd|. It returns the fresh |BIO| or NULL on error. */ |
| BIO *BIO_new_socket(int fd, int close_flag); |
| |
| |
| /* Connect BIOs. |
| * |
| * A connection BIO creates a network connection and transfers data over the |
| * resulting socket. */ |
| |
| const BIO_METHOD *BIO_s_connect(void); |
| |
| /* BIO_new_connect returns a BIO that connects to the given hostname and port. |
| * The |host_and_optional_port| argument should be of the form |
| * "www.example.com" or "www.example.com:443". If the port is omitted, it must |
| * be provided with |BIO_set_conn_port|. |
| * |
| * It returns the new BIO on success, or NULL on error. */ |
| BIO *BIO_new_connect(const char *host_and_optional_port); |
| |
| /* BIO_set_conn_hostname sets |host_and_optional_port| as the hostname and |
| * optional port that |bio| will connect to. If the port is omitted, it must be |
| * provided with |BIO_set_conn_port|. |
| * |
| * It returns one on success and zero otherwise. */ |
| int BIO_set_conn_hostname(BIO *bio, const char *host_and_optional_port); |
| |
| /* BIO_set_conn_port sets |port_str| as the port or service name that |bio| |
| * will connect to. It returns one on success and zero otherwise. */ |
| int BIO_set_conn_port(BIO *bio, const char *port_str); |
| |
| /* BIO_set_nbio sets whether |bio| will use non-blocking I/O operations. It |
| * returns one on success and zero otherwise. */ |
| int BIO_set_nbio(BIO *bio, int on); |
| |
| |
| /* Datagram BIOs. |
| * |
| * TODO(fork): not implemented. */ |
| |
| #define BIO_CTRL_DGRAM_QUERY_MTU 40 /* as kernel for current MTU */ |
| |
| #define BIO_CTRL_DGRAM_SET_MTU 42 /* set cached value for MTU. want to use |
| this if asking the kernel fails */ |
| |
| #define BIO_CTRL_DGRAM_MTU_EXCEEDED 43 /* check whether the MTU was exceed in |
| the previous write operation. */ |
| |
| #define BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT \ |
| 45 /* Next DTLS handshake timeout to adjust socket timeouts */ |
| |
| #define BIO_CTRL_DGRAM_GET_PEER 46 |
| |
| #define BIO_CTRL_DGRAM_GET_FALLBACK_MTU 47 |
| |
| |
| /* BIO Pairs. |
| * |
| * BIO pairs provide a "loopback" like system: a pair of BIOs where data |
| * written to one can be read from the other and vice versa. */ |
| |
| /* BIO_new_bio_pair sets |*out1| and |*out2| to two freshly created BIOs where |
| * data written to one can be read from the other and vice versa. The |
| * |writebuf1| argument gives the size of the buffer used in |*out1| and |
| * |writebuf2| for |*out2|. It returns one on success and zero on error. */ |
| int BIO_new_bio_pair(BIO **out1, size_t writebuf1, BIO **out2, |
| size_t writebuf2); |
| |
| /* BIO_s_bio returns the method for a BIO pair. */ |
| const BIO_METHOD *BIO_s_bio(void); |
| |
| /* BIO_ctrl_get_read_request returns the number of bytes that the other side of |
| * |bio| tried (unsuccessfully) to read. */ |
| size_t BIO_ctrl_get_read_request(BIO *bio); |
| |
| /* BIO_ctrl_get_write_guarantee returns the number of bytes that |bio| (which |
| * must have been returned by |BIO_new_bio_pair|) will accept on the next |
| * |BIO_write| call. */ |
| size_t BIO_ctrl_get_write_guarantee(BIO *bio); |
| |
| /* BIO_shutdown_wr marks |bio| as closed, from the point of view of the other |
| * side of the pair. Future |BIO_write| calls on |bio| will fail. It returns |
| * one on success and zero otherwise. */ |
| int BIO_shutdown_wr(BIO *bio); |
| |
| |
| /* BIO_NOCLOSE and |BIO_CLOSE| can be used as symbolic arguments when a "close |
| * flag" is passed to a BIO function. */ |
| #define BIO_NOCLOSE 0 |
| #define BIO_CLOSE 1 |
| |
| /* These are passed to the BIO callback */ |
| #define BIO_CB_FREE 0x01 |
| #define BIO_CB_READ 0x02 |
| #define BIO_CB_WRITE 0x03 |
| #define BIO_CB_PUTS 0x04 |
| #define BIO_CB_GETS 0x05 |
| #define BIO_CB_CTRL 0x06 |
| |
| /* The callback is called before and after the underling operation, |
| * The BIO_CB_RETURN flag indicates if it is after the call */ |
| #define BIO_CB_RETURN 0x80 |
| |
| /* These are values of the |cmd| argument to |BIO_ctrl|. */ |
| #define BIO_CTRL_RESET 1 /* opt - rewind/zero etc */ |
| #define BIO_CTRL_EOF 2 /* opt - are we at the eof */ |
| #define BIO_CTRL_INFO 3 /* opt - extra tit-bits */ |
| #define BIO_CTRL_SET 4 /* man - set the 'IO' type */ |
| #define BIO_CTRL_GET 5 /* man - get the 'IO' type */ |
| #define BIO_CTRL_PUSH 6 /* opt - internal, used to signify change */ |
| #define BIO_CTRL_POP 7 /* opt - internal, used to signify change */ |
| #define BIO_CTRL_GET_CLOSE 8 /* man - set the 'close' on free */ |
| #define BIO_CTRL_SET_CLOSE 9 /* man - set the 'close' on free */ |
| #define BIO_CTRL_PENDING 10 /* opt - is their more data buffered */ |
| #define BIO_CTRL_FLUSH 11 /* opt - 'flush' buffered output */ |
| #define BIO_CTRL_WPENDING 13 /* opt - number of bytes still to write */ |
| /* callback is int cb(BIO *bio,state,ret); */ |
| #define BIO_CTRL_SET_CALLBACK 14 /* opt - set callback function */ |
| #define BIO_CTRL_GET_CALLBACK 15 /* opt - set callback function */ |
| #define BIO_CTRL_SET_FILENAME 30 /* BIO_s_file special */ |
| |
| |
| /* Private functions */ |
| |
| #define BIO_FLAGS_READ 0x01 |
| #define BIO_FLAGS_WRITE 0x02 |
| #define BIO_FLAGS_IO_SPECIAL 0x04 |
| #define BIO_FLAGS_RWS (BIO_FLAGS_READ | BIO_FLAGS_WRITE | BIO_FLAGS_IO_SPECIAL) |
| #define BIO_FLAGS_SHOULD_RETRY 0x08 |
| #define BIO_FLAGS_BASE64_NO_NL 0x100 |
| /* This is used with memory BIOs: it means we shouldn't free up or change the |
| * data in any way. */ |
| #define BIO_FLAGS_MEM_RDONLY 0x200 |
| |
| /* These are the 'types' of BIOs */ |
| #define BIO_TYPE_NONE 0 |
| #define BIO_TYPE_MEM (1 | 0x0400) |
| #define BIO_TYPE_FILE (2 | 0x0400) |
| #define BIO_TYPE_FD (4 | 0x0400 | 0x0100) |
| #define BIO_TYPE_SOCKET (5 | 0x0400 | 0x0100) |
| #define BIO_TYPE_NULL (6 | 0x0400) |
| #define BIO_TYPE_SSL (7 | 0x0200) |
| #define BIO_TYPE_MD (8 | 0x0200) /* passive filter */ |
| #define BIO_TYPE_BUFFER (9 | 0x0200) /* filter */ |
| #define BIO_TYPE_CIPHER (10 | 0x0200) /* filter */ |
| #define BIO_TYPE_BASE64 (11 | 0x0200) /* filter */ |
| #define BIO_TYPE_CONNECT (12 | 0x0400 | 0x0100) /* socket - connect */ |
| #define BIO_TYPE_ACCEPT (13 | 0x0400 | 0x0100) /* socket for accept */ |
| #define BIO_TYPE_PROXY_CLIENT (14 | 0x0200) /* client proxy BIO */ |
| #define BIO_TYPE_PROXY_SERVER (15 | 0x0200) /* server proxy BIO */ |
| #define BIO_TYPE_NBIO_TEST (16 | 0x0200) /* server proxy BIO */ |
| #define BIO_TYPE_NULL_FILTER (17 | 0x0200) |
| #define BIO_TYPE_BER (18 | 0x0200) /* BER -> bin filter */ |
| #define BIO_TYPE_BIO (19 | 0x0400) /* (half a) BIO pair */ |
| #define BIO_TYPE_LINEBUFFER (20 | 0x0200) /* filter */ |
| #define BIO_TYPE_DGRAM (21 | 0x0400 | 0x0100) |
| #define BIO_TYPE_ASN1 (22 | 0x0200) /* filter */ |
| #define BIO_TYPE_COMP (23 | 0x0200) /* filter */ |
| |
| #define BIO_TYPE_DESCRIPTOR 0x0100 /* socket, fd, connect or accept */ |
| #define BIO_TYPE_FILTER 0x0200 |
| #define BIO_TYPE_SOURCE_SINK 0x0400 |
| |
| struct bio_method_st { |
| int type; |
| const char *name; |
| int (*bwrite)(BIO *, const char *, int); |
| int (*bread)(BIO *, char *, int); |
| /* TODO(fork): remove bputs. */ |
| int (*bputs)(BIO *, const char *); |
| int (*bgets)(BIO *, char *, int); |
| long (*ctrl)(BIO *, int, long, void *); |
| int (*create)(BIO *); |
| int (*destroy)(BIO *); |
| long (*callback_ctrl)(BIO *, int, bio_info_cb); |
| }; |
| |
| struct bio_st { |
| const BIO_METHOD *method; |
| /* bio, mode, argp, argi, argl, ret */ |
| long (*callback)(struct bio_st *, int, const char *, int, long, long); |
| char *cb_arg; /* first argument for the callback */ |
| |
| /* init is non-zero if this |BIO| has been initialised. */ |
| int init; |
| /* shutdown is often used by specific |BIO_METHOD|s to determine whether |
| * they own some underlying resource. This flag can often by controlled by |
| * |BIO_set_close|. For example, whether an fd BIO closes the underlying fd |
| * when it, itself, is closed. */ |
| int shutdown; |
| int flags; |
| int retry_reason; |
| /* num is a BIO-specific value. For example, in fd BIOs it's used to store a |
| * file descriptor. */ |
| int num; |
| /* TODO(fork): reference counting is only used by the SSL BIO code. If we can |
| * dump that then we can remove this. We could also drop |
| * BIO_CTRL_PUSH/BIO_CTRL_POP. */ |
| int references; |
| void *ptr; |
| /* next_bio points to the next |BIO| in a chain. This |BIO| owns a reference |
| * to |next_bio|. */ |
| struct bio_st *next_bio; /* used by filter BIOs */ |
| /* TODO(fork): either bring back BIO_number_read and write or remove these. */ |
| unsigned long num_read; |
| unsigned long num_write; |
| |
| CRYPTO_EX_DATA ex_data; |
| }; |
| |
| #define BIO_C_SET_CONNECT 100 |
| #define BIO_C_DO_STATE_MACHINE 101 |
| #define BIO_C_SET_NBIO 102 |
| #define BIO_C_SET_PROXY_PARAM 103 |
| #define BIO_C_SET_FD 104 |
| #define BIO_C_GET_FD 105 |
| #define BIO_C_SET_FILE_PTR 106 |
| #define BIO_C_GET_FILE_PTR 107 |
| #define BIO_C_SET_FILENAME 108 |
| #define BIO_C_SET_SSL 109 |
| #define BIO_C_GET_SSL 110 |
| #define BIO_C_SET_MD 111 |
| #define BIO_C_GET_MD 112 |
| #define BIO_C_GET_CIPHER_STATUS 113 |
| #define BIO_C_SET_BUF_MEM 114 |
| #define BIO_C_GET_BUF_MEM_PTR 115 |
| #define BIO_C_GET_BUFF_NUM_LINES 116 |
| #define BIO_C_SET_BUFF_SIZE 117 |
| #define BIO_C_SET_ACCEPT 118 |
| #define BIO_C_SSL_MODE 119 |
| #define BIO_C_GET_MD_CTX 120 |
| #define BIO_C_GET_PROXY_PARAM 121 |
| #define BIO_C_SET_BUFF_READ_DATA 122 /* data to read first */ |
| #define BIO_C_GET_CONNECT 123 |
| #define BIO_C_GET_ACCEPT 124 |
| #define BIO_C_SET_SSL_RENEGOTIATE_BYTES 125 |
| #define BIO_C_GET_SSL_NUM_RENEGOTIATES 126 |
| #define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT 127 |
| #define BIO_C_FILE_SEEK 128 |
| #define BIO_C_GET_CIPHER_CTX 129 |
| #define BIO_C_SET_BUF_MEM_EOF_RETURN 130/*return end of input value*/ |
| #define BIO_C_SET_BIND_MODE 131 |
| #define BIO_C_GET_BIND_MODE 132 |
| #define BIO_C_FILE_TELL 133 |
| #define BIO_C_GET_SOCKS 134 |
| #define BIO_C_SET_SOCKS 135 |
| |
| #define BIO_C_SET_WRITE_BUF_SIZE 136/* for BIO_s_bio */ |
| #define BIO_C_GET_WRITE_BUF_SIZE 137 |
| #define BIO_C_GET_WRITE_GUARANTEE 140 |
| #define BIO_C_GET_READ_REQUEST 141 |
| #define BIO_C_SHUTDOWN_WR 142 |
| #define BIO_C_NREAD0 143 |
| #define BIO_C_NREAD 144 |
| #define BIO_C_NWRITE0 145 |
| #define BIO_C_NWRITE 146 |
| #define BIO_C_RESET_READ_REQUEST 147 |
| #define BIO_C_SET_MD_CTX 148 |
| |
| #define BIO_C_SET_PREFIX 149 |
| #define BIO_C_GET_PREFIX 150 |
| #define BIO_C_SET_SUFFIX 151 |
| #define BIO_C_GET_SUFFIX 152 |
| |
| #define BIO_C_SET_EX_ARG 153 |
| #define BIO_C_GET_EX_ARG 154 |
| |
| |
| #if defined(__cplusplus) |
| } /* extern C */ |
| #endif |
| |
| #define BIO_F_bio_make_pair 100 |
| #define BIO_F_bio_ctrl 101 |
| #define BIO_F_buffer_ctrl 102 |
| #define BIO_F_BIO_new_file 103 |
| #define BIO_F_file_read 104 |
| #define BIO_F_BIO_new 105 |
| #define BIO_F_bio_io 106 |
| #define BIO_F_BIO_new_mem_buf 107 |
| #define BIO_F_mem_write 108 |
| #define BIO_F_conn_state 109 |
| #define BIO_F_conn_ctrl 110 |
| #define BIO_F_file_ctrl 111 |
| #define BIO_F_BIO_callback_ctrl 112 |
| #define BIO_F_bio_ip_and_port_to_socket_and_addr 113 |
| #define BIO_F_bio_write 114 |
| #define BIO_F_BIO_ctrl 115 |
| #define BIO_R_UNSUPPORTED_METHOD 100 |
| #define BIO_R_NO_PORT_SPECIFIED 101 |
| #define BIO_R_NO_HOSTNAME_SPECIFIED 102 |
| #define BIO_R_IN_USE 103 |
| #define BIO_R_UNINITIALIZED 104 |
| #define BIO_R_CONNECT_ERROR 105 |
| #define BIO_R_KEEPALIVE 106 |
| #define BIO_R_BROKEN_PIPE 107 |
| #define BIO_R_NBIO_CONNECT_ERROR 108 |
| #define BIO_R_BAD_FOPEN_MODE 109 |
| #define BIO_R_ASN1_OBJECT_TOO_LONG 110 |
| #define BIO_R_INVALID_ARGUMENT 111 |
| #define BIO_R_WRITE_TO_READ_ONLY_BIO 112 |
| #define BIO_R_ERROR_SETTING_NBIO 113 |
| #define BIO_R_SYS_LIB 114 |
| #define BIO_R_NO_SUCH_FILE 115 |
| #define BIO_R_NULL_PARAMETER 116 |
| #define BIO_R_UNABLE_TO_CREATE_SOCKET 117 |
| |
| #endif /* OPENSSL_HEADER_BIO_H */ |