|  | // Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. | 
|  | // Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved. | 
|  | // | 
|  | // Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | // you may not use this file except in compliance with the License. | 
|  | // You may obtain a copy of the License at | 
|  | // | 
|  | //     https://www.apache.org/licenses/LICENSE-2.0 | 
|  | // | 
|  | // Unless required by applicable law or agreed to in writing, software | 
|  | // distributed under the License is distributed on an "AS IS" BASIS, | 
|  | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | // See the License for the specific language governing permissions and | 
|  | // limitations under the License. | 
|  |  | 
|  | #include <openssl/ssl.h> | 
|  |  | 
|  | #include <assert.h> | 
|  |  | 
|  | #include <algorithm> | 
|  | #include <utility> | 
|  |  | 
|  | #include <openssl/rand.h> | 
|  |  | 
|  | #include "../crypto/internal.h" | 
|  | #include "internal.h" | 
|  |  | 
|  |  | 
|  | BSSL_NAMESPACE_BEGIN | 
|  |  | 
|  | SSL_HANDSHAKE::SSL_HANDSHAKE(SSL *ssl_arg) | 
|  | : ssl(ssl_arg), | 
|  | transcript(SSL_is_dtls(ssl_arg)), | 
|  | inner_transcript(SSL_is_dtls(ssl_arg)), | 
|  | ech_is_inner(false), | 
|  | ech_authenticated_reject(false), | 
|  | scts_requested(false), | 
|  | handshake_finalized(false), | 
|  | accept_psk_mode(false), | 
|  | cert_request(false), | 
|  | certificate_status_expected(false), | 
|  | ocsp_stapling_requested(false), | 
|  | should_ack_sni(false), | 
|  | in_false_start(false), | 
|  | in_early_data(false), | 
|  | early_data_offered(false), | 
|  | can_early_read(false), | 
|  | can_early_write(false), | 
|  | is_early_version(false), | 
|  | next_proto_neg_seen(false), | 
|  | ticket_expected(false), | 
|  | extended_master_secret(false), | 
|  | pending_private_key_op(false), | 
|  | handback(false), | 
|  | hints_requested(false), | 
|  | cert_compression_negotiated(false), | 
|  | apply_jdk11_workaround(false), | 
|  | can_release_private_key(false), | 
|  | channel_id_negotiated(false), | 
|  | received_hello_verify_request(false), | 
|  | matched_peer_trust_anchor(false), | 
|  | peer_matched_trust_anchor(false) { | 
|  | assert(ssl); | 
|  |  | 
|  | // Draw entropy for all GREASE values at once. This avoids calling | 
|  | // |RAND_bytes| repeatedly and makes the values consistent within a | 
|  | // connection. The latter is so the second ClientHello matches after | 
|  | // HelloRetryRequest and so supported_groups and key_shares are consistent. | 
|  | RAND_bytes(grease_seed, sizeof(grease_seed)); | 
|  | } | 
|  |  | 
|  | SSL_HANDSHAKE::~SSL_HANDSHAKE() { | 
|  | ssl->ctx->x509_method->hs_flush_cached_ca_names(this); | 
|  | } | 
|  |  | 
|  | bool SSL_HANDSHAKE::GetClientHello(SSLMessage *out_msg, | 
|  | SSL_CLIENT_HELLO *out_client_hello) { | 
|  | if (!ech_client_hello_buf.empty()) { | 
|  | // If the backing buffer is non-empty, the ClientHelloInner has been set. | 
|  | out_msg->is_v2_hello = false; | 
|  | out_msg->type = SSL3_MT_CLIENT_HELLO; | 
|  | out_msg->raw = CBS(ech_client_hello_buf); | 
|  | size_t header_len = | 
|  | SSL_is_dtls(ssl) ? DTLS1_HM_HEADER_LENGTH : SSL3_HM_HEADER_LENGTH; | 
|  | out_msg->body = CBS(Span(ech_client_hello_buf).subspan(header_len)); | 
|  | } else if (!ssl->method->get_message(ssl, out_msg)) { | 
|  | // The message has already been read, so this cannot fail. | 
|  | OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (!SSL_parse_client_hello(ssl, out_client_hello, CBS_data(&out_msg->body), | 
|  | CBS_len(&out_msg->body))) { | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_DECODE_ERROR); | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | UniquePtr<SSL_HANDSHAKE> ssl_handshake_new(SSL *ssl) { | 
|  | UniquePtr<SSL_HANDSHAKE> hs = MakeUnique<SSL_HANDSHAKE>(ssl); | 
|  | if (!hs || !hs->transcript.Init()) { | 
|  | return nullptr; | 
|  | } | 
|  | hs->config = ssl->config.get(); | 
|  | if (!hs->config) { | 
|  | assert(hs->config); | 
|  | return nullptr; | 
|  | } | 
|  | return hs; | 
|  | } | 
|  |  | 
|  | bool ssl_check_message_type(SSL *ssl, const SSLMessage &msg, int type) { | 
|  | if (msg.type != type) { | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE); | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_MESSAGE); | 
|  | ERR_add_error_dataf("got type %d, wanted type %d", msg.type, type); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ssl_add_message_cbb(SSL *ssl, CBB *cbb) { | 
|  | Array<uint8_t> msg; | 
|  | if (!ssl->method->finish_message(ssl, cbb, &msg) || | 
|  | !ssl->method->add_message(ssl, std::move(msg))) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | size_t ssl_max_handshake_message_len(const SSL *ssl) { | 
|  | // kMaxMessageLen is the default maximum message size for handshakes which do | 
|  | // not accept peer certificate chains. | 
|  | static const size_t kMaxMessageLen = 16384; | 
|  |  | 
|  | if (SSL_in_init(ssl)) { | 
|  | SSL_CONFIG *config = ssl->config.get();  // SSL_in_init() implies not NULL. | 
|  | if ((!ssl->server || (config->verify_mode & SSL_VERIFY_PEER)) && | 
|  | kMaxMessageLen < ssl->max_cert_list) { | 
|  | return ssl->max_cert_list; | 
|  | } | 
|  | return kMaxMessageLen; | 
|  | } | 
|  |  | 
|  | if (ssl_protocol_version(ssl) < TLS1_3_VERSION) { | 
|  | // In TLS 1.2 and below, the largest acceptable post-handshake message is | 
|  | // a HelloRequest. | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (ssl->server) { | 
|  | // The largest acceptable post-handshake message for a server is a | 
|  | // KeyUpdate. We will never initiate post-handshake auth. | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | // Clients must accept NewSessionTicket, so allow the default size or | 
|  | // max_cert_list, whichever is greater. | 
|  | return std::max(kMaxMessageLen, size_t{ssl->max_cert_list}); | 
|  | } | 
|  |  | 
|  | bool ssl_hash_message(SSL_HANDSHAKE *hs, const SSLMessage &msg) { | 
|  | // V2ClientHello messages are pre-hashed. | 
|  | if (msg.is_v2_hello) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return hs->transcript.Update(msg.raw); | 
|  | } | 
|  |  | 
|  | bool ssl_parse_extensions(const CBS *cbs, uint8_t *out_alert, | 
|  | std::initializer_list<SSLExtension *> extensions, | 
|  | bool ignore_unknown) { | 
|  | // Reset everything. | 
|  | for (SSLExtension *ext : extensions) { | 
|  | ext->present = false; | 
|  | CBS_init(&ext->data, nullptr, 0); | 
|  | if (!ext->allowed) { | 
|  | assert(!ignore_unknown); | 
|  | } | 
|  | } | 
|  |  | 
|  | CBS copy = *cbs; | 
|  | while (CBS_len(©) != 0) { | 
|  | uint16_t type; | 
|  | CBS data; | 
|  | if (!CBS_get_u16(©, &type) || | 
|  | !CBS_get_u16_length_prefixed(©, &data)) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_PARSE_TLSEXT); | 
|  | *out_alert = SSL_AD_DECODE_ERROR; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | SSLExtension *found = nullptr; | 
|  | for (SSLExtension *ext : extensions) { | 
|  | if (type == ext->type && ext->allowed) { | 
|  | found = ext; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (found == nullptr) { | 
|  | if (ignore_unknown) { | 
|  | continue; | 
|  | } | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_EXTENSION); | 
|  | ERR_add_error_dataf("extension %u", unsigned{type}); | 
|  | *out_alert = SSL_AD_UNSUPPORTED_EXTENSION; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Duplicate ext_types are forbidden. | 
|  | if (found->present) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_DUPLICATE_EXTENSION); | 
|  | *out_alert = SSL_AD_ILLEGAL_PARAMETER; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | found->present = true; | 
|  | found->data = data; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | enum ssl_verify_result_t ssl_verify_peer_cert(SSL_HANDSHAKE *hs) { | 
|  | SSL *const ssl = hs->ssl; | 
|  | const SSL_SESSION *prev_session = ssl->s3->established_session.get(); | 
|  | if (prev_session != NULL) { | 
|  | // If renegotiating, the server must not change the server certificate. See | 
|  | // https://mitls.org/pages/attacks/3SHAKE. We never resume on renegotiation, | 
|  | // so this check is sufficient to ensure the reported peer certificate never | 
|  | // changes on renegotiation. | 
|  | assert(!ssl->server); | 
|  | if (sk_CRYPTO_BUFFER_num(prev_session->certs.get()) != | 
|  | sk_CRYPTO_BUFFER_num(hs->new_session->certs.get())) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_SERVER_CERT_CHANGED); | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_ILLEGAL_PARAMETER); | 
|  | return ssl_verify_invalid; | 
|  | } | 
|  |  | 
|  | for (size_t i = 0; i < sk_CRYPTO_BUFFER_num(hs->new_session->certs.get()); | 
|  | i++) { | 
|  | const CRYPTO_BUFFER *old_cert = | 
|  | sk_CRYPTO_BUFFER_value(prev_session->certs.get(), i); | 
|  | const CRYPTO_BUFFER *new_cert = | 
|  | sk_CRYPTO_BUFFER_value(hs->new_session->certs.get(), i); | 
|  | if (Span(CRYPTO_BUFFER_data(old_cert), CRYPTO_BUFFER_len(old_cert)) != | 
|  | Span(CRYPTO_BUFFER_data(new_cert), CRYPTO_BUFFER_len(new_cert))) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_SERVER_CERT_CHANGED); | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_ILLEGAL_PARAMETER); | 
|  | return ssl_verify_invalid; | 
|  | } | 
|  | } | 
|  |  | 
|  | // The certificate is identical, so we may skip re-verifying the | 
|  | // certificate. Since we only authenticated the previous one, copy other | 
|  | // authentication from the established session and ignore what was newly | 
|  | // received. | 
|  | hs->new_session->ocsp_response = UpRef(prev_session->ocsp_response); | 
|  | hs->new_session->signed_cert_timestamp_list = | 
|  | UpRef(prev_session->signed_cert_timestamp_list); | 
|  | hs->new_session->verify_result = prev_session->verify_result; | 
|  | return ssl_verify_ok; | 
|  | } | 
|  |  | 
|  | uint8_t alert = SSL_AD_CERTIFICATE_UNKNOWN; | 
|  | enum ssl_verify_result_t ret; | 
|  | if (hs->config->custom_verify_callback != nullptr) { | 
|  | ret = hs->config->custom_verify_callback(ssl, &alert); | 
|  | switch (ret) { | 
|  | case ssl_verify_ok: | 
|  | hs->new_session->verify_result = X509_V_OK; | 
|  | break; | 
|  | case ssl_verify_invalid: | 
|  | // If |SSL_VERIFY_NONE|, the error is non-fatal, but we keep the result. | 
|  | if (hs->config->verify_mode == SSL_VERIFY_NONE) { | 
|  | ERR_clear_error(); | 
|  | ret = ssl_verify_ok; | 
|  | } | 
|  | hs->new_session->verify_result = X509_V_ERR_APPLICATION_VERIFICATION; | 
|  | break; | 
|  | case ssl_verify_retry: | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | ret = ssl->ctx->x509_method->session_verify_cert_chain( | 
|  | hs->new_session.get(), hs, &alert) | 
|  | ? ssl_verify_ok | 
|  | : ssl_verify_invalid; | 
|  | } | 
|  |  | 
|  | if (ret == ssl_verify_invalid) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_CERTIFICATE_VERIFY_FAILED); | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, alert); | 
|  | } | 
|  |  | 
|  | // Emulate OpenSSL's client OCSP callback. OpenSSL verifies certificates | 
|  | // before it receives the OCSP, so it needs a second callback for OCSP. | 
|  | if (ret == ssl_verify_ok && !ssl->server && | 
|  | hs->config->ocsp_stapling_enabled && | 
|  | ssl->ctx->legacy_ocsp_callback != nullptr) { | 
|  | int cb_ret = | 
|  | ssl->ctx->legacy_ocsp_callback(ssl, ssl->ctx->legacy_ocsp_callback_arg); | 
|  | if (cb_ret <= 0) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_OCSP_CB_ERROR); | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, | 
|  | cb_ret == 0 ? SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE | 
|  | : SSL_AD_INTERNAL_ERROR); | 
|  | ret = ssl_verify_invalid; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | // Verifies a stored certificate when resuming a session. A few things are | 
|  | // different from verify_peer_cert: | 
|  | // 1. We can't be renegotiating if we're resuming a session. | 
|  | // 2. The session is immutable, so we don't support verify_mode == | 
|  | // SSL_VERIFY_NONE | 
|  | // 3. We don't call the OCSP callback. | 
|  | // 4. We only support custom verify callbacks. | 
|  | enum ssl_verify_result_t ssl_reverify_peer_cert(SSL_HANDSHAKE *hs, | 
|  | bool send_alert) { | 
|  | SSL *const ssl = hs->ssl; | 
|  | assert(ssl->s3->established_session == nullptr); | 
|  | assert(hs->config->verify_mode != SSL_VERIFY_NONE); | 
|  |  | 
|  | uint8_t alert = SSL_AD_CERTIFICATE_UNKNOWN; | 
|  | enum ssl_verify_result_t ret = ssl_verify_invalid; | 
|  | if (hs->config->custom_verify_callback != nullptr) { | 
|  | ret = hs->config->custom_verify_callback(ssl, &alert); | 
|  | } | 
|  |  | 
|  | if (ret == ssl_verify_invalid) { | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_CERTIFICATE_VERIFY_FAILED); | 
|  | if (send_alert) { | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, alert); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static uint16_t grease_index_to_value(const SSL_HANDSHAKE *hs, | 
|  | enum ssl_grease_index_t index) { | 
|  | // This generates a random value of the form 0xωaωa, for all 0 ≤ ω < 16. | 
|  | uint16_t ret = hs->grease_seed[index]; | 
|  | ret = (ret & 0xf0) | 0x0a; | 
|  | ret |= ret << 8; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | uint16_t ssl_get_grease_value(const SSL_HANDSHAKE *hs, | 
|  | enum ssl_grease_index_t index) { | 
|  | uint16_t ret = grease_index_to_value(hs, index); | 
|  | if (index == ssl_grease_extension2 && | 
|  | ret == grease_index_to_value(hs, ssl_grease_extension1)) { | 
|  | // The two fake extensions must not have the same value. GREASE values are | 
|  | // of the form 0x1a1a, 0x2a2a, 0x3a3a, etc., so XOR to generate a different | 
|  | // one. | 
|  | ret ^= 0x1010; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | enum ssl_hs_wait_t ssl_get_finished(SSL_HANDSHAKE *hs) { | 
|  | SSL *const ssl = hs->ssl; | 
|  | SSLMessage msg; | 
|  | if (!ssl->method->get_message(ssl, &msg)) { | 
|  | return ssl_hs_read_message; | 
|  | } | 
|  |  | 
|  | if (!ssl_check_message_type(ssl, msg, SSL3_MT_FINISHED)) { | 
|  | return ssl_hs_error; | 
|  | } | 
|  |  | 
|  | // Snapshot the finished hash before incorporating the new message. | 
|  | uint8_t finished[EVP_MAX_MD_SIZE]; | 
|  | size_t finished_len; | 
|  | if (!hs->transcript.GetFinishedMAC(finished, &finished_len, | 
|  | ssl_handshake_session(hs), !ssl->server) || | 
|  | !ssl_hash_message(hs, msg)) { | 
|  | return ssl_hs_error; | 
|  | } | 
|  |  | 
|  | bool finished_ok = CBS_mem_equal(&msg.body, finished, finished_len); | 
|  | if (CRYPTO_fuzzer_mode_enabled()) { | 
|  | finished_ok = true; | 
|  | } | 
|  | if (!finished_ok) { | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_DECRYPT_ERROR); | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_DIGEST_CHECK_FAILED); | 
|  | return ssl_hs_error; | 
|  | } | 
|  |  | 
|  | // Copy the Finished so we can use it for renegotiation checks. | 
|  | if (finished_len > ssl->s3->previous_client_finished.capacity() || | 
|  | finished_len > ssl->s3->previous_server_finished.capacity()) { | 
|  | OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | 
|  | return ssl_hs_error; | 
|  | } | 
|  |  | 
|  | if (ssl->server) { | 
|  | ssl->s3->previous_client_finished.CopyFrom(Span(finished, finished_len)); | 
|  | } else { | 
|  | ssl->s3->previous_server_finished.CopyFrom(Span(finished, finished_len)); | 
|  | } | 
|  |  | 
|  | // The Finished message should be the end of a flight. | 
|  | if (ssl->method->has_unprocessed_handshake_data(ssl)) { | 
|  | ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE); | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_EXCESS_HANDSHAKE_DATA); | 
|  | return ssl_hs_error; | 
|  | } | 
|  |  | 
|  | ssl->method->next_message(ssl); | 
|  | return ssl_hs_ok; | 
|  | } | 
|  |  | 
|  | bool ssl_send_finished(SSL_HANDSHAKE *hs) { | 
|  | SSL *const ssl = hs->ssl; | 
|  | const SSL_SESSION *session = ssl_handshake_session(hs); | 
|  |  | 
|  | uint8_t finished_buf[EVP_MAX_MD_SIZE]; | 
|  | size_t finished_len; | 
|  | if (!hs->transcript.GetFinishedMAC(finished_buf, &finished_len, session, | 
|  | ssl->server)) { | 
|  | return false; | 
|  | } | 
|  | auto finished = Span(finished_buf, finished_len); | 
|  |  | 
|  | // Log the master secret, if logging is enabled. | 
|  | if (!ssl_log_secret(ssl, "CLIENT_RANDOM", session->secret)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Copy the Finished so we can use it for renegotiation checks. | 
|  | bool ok = ssl->server | 
|  | ? ssl->s3->previous_server_finished.TryCopyFrom(finished) | 
|  | : ssl->s3->previous_client_finished.TryCopyFrom(finished); | 
|  | if (!ok) { | 
|  | OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | 
|  | return ssl_hs_error; | 
|  | } | 
|  |  | 
|  | ScopedCBB cbb; | 
|  | CBB body; | 
|  | if (!ssl->method->init_message(ssl, cbb.get(), &body, SSL3_MT_FINISHED) || | 
|  | !CBB_add_bytes(&body, finished.data(), finished.size()) || | 
|  | !ssl_add_message_cbb(ssl, cbb.get())) { | 
|  | OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ssl_send_tls12_certificate(SSL_HANDSHAKE *hs) { | 
|  | ScopedCBB cbb; | 
|  | CBB body, certs, cert; | 
|  | if (!hs->ssl->method->init_message(hs->ssl, cbb.get(), &body, | 
|  | SSL3_MT_CERTIFICATE) || | 
|  | !CBB_add_u24_length_prefixed(&body, &certs)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (hs->credential != nullptr) { | 
|  | assert(hs->credential->type == SSLCredentialType::kX509); | 
|  | STACK_OF(CRYPTO_BUFFER) *chain = hs->credential->chain.get(); | 
|  | for (size_t i = 0; i < sk_CRYPTO_BUFFER_num(chain); i++) { | 
|  | CRYPTO_BUFFER *buffer = sk_CRYPTO_BUFFER_value(chain, i); | 
|  | if (!CBB_add_u24_length_prefixed(&certs, &cert) || | 
|  | !CBB_add_bytes(&cert, CRYPTO_BUFFER_data(buffer), | 
|  | CRYPTO_BUFFER_len(buffer))) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return ssl_add_message_cbb(hs->ssl, cbb.get()); | 
|  | } | 
|  |  | 
|  | const SSL_SESSION *ssl_handshake_session(const SSL_HANDSHAKE *hs) { | 
|  | if (hs->new_session) { | 
|  | return hs->new_session.get(); | 
|  | } | 
|  | return hs->ssl->session.get(); | 
|  | } | 
|  |  | 
|  | int ssl_run_handshake(SSL_HANDSHAKE *hs, bool *out_early_return) { | 
|  | SSL *const ssl = hs->ssl; | 
|  | for (;;) { | 
|  | // If a timeout during the handshake triggered a DTLS ACK or retransmit, we | 
|  | // resolve that first. E.g., if |ssl_hs_private_key_operation| is slow, the | 
|  | // ACK timer may fire. | 
|  | if (hs->wait != ssl_hs_error && SSL_is_dtls(ssl)) { | 
|  | int ret = ssl->method->flush(ssl); | 
|  | if (ret <= 0) { | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Resolve the operation the handshake was waiting on. Each condition may | 
|  | // halt the handshake by returning, or continue executing if the handshake | 
|  | // may immediately proceed. Cases which halt the handshake can clear | 
|  | // |hs->wait| to re-enter the state machine on the next iteration, or leave | 
|  | // it set to keep the condition sticky. | 
|  | switch (hs->wait) { | 
|  | case ssl_hs_error: | 
|  | ERR_restore_state(hs->error.get()); | 
|  | return -1; | 
|  |  | 
|  | case ssl_hs_flush: { | 
|  | int ret = ssl->method->flush(ssl); | 
|  | if (ret <= 0) { | 
|  | return ret; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | case ssl_hs_read_server_hello: | 
|  | case ssl_hs_read_message: | 
|  | case ssl_hs_read_change_cipher_spec: { | 
|  | if (SSL_is_quic(ssl)) { | 
|  | // QUIC has no ChangeCipherSpec messages. | 
|  | assert(hs->wait != ssl_hs_read_change_cipher_spec); | 
|  | // The caller should call |SSL_provide_quic_data|. Clear |hs->wait| so | 
|  | // the handshake can check if there is sufficient data next iteration. | 
|  | ssl->s3->rwstate = SSL_ERROR_WANT_READ; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | uint8_t alert = SSL_AD_DECODE_ERROR; | 
|  | size_t consumed = 0; | 
|  | ssl_open_record_t ret; | 
|  | if (hs->wait == ssl_hs_read_change_cipher_spec) { | 
|  | ret = ssl_open_change_cipher_spec(ssl, &consumed, &alert, | 
|  | ssl->s3->read_buffer.span()); | 
|  | } else { | 
|  | ret = ssl_open_handshake(ssl, &consumed, &alert, | 
|  | ssl->s3->read_buffer.span()); | 
|  | } | 
|  | if (ret == ssl_open_record_error && | 
|  | hs->wait == ssl_hs_read_server_hello) { | 
|  | uint32_t err = ERR_peek_error(); | 
|  | if (ERR_GET_LIB(err) == ERR_LIB_SSL && | 
|  | ERR_GET_REASON(err) == SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE) { | 
|  | // Add a dedicated error code to the queue for a handshake_failure | 
|  | // alert in response to ClientHello. This matches NSS's client | 
|  | // behavior and gives a better error on a (probable) failure to | 
|  | // negotiate initial parameters. Note: this error code comes after | 
|  | // the original one. | 
|  | // | 
|  | // See https://crbug.com/446505. | 
|  | OPENSSL_PUT_ERROR(SSL, SSL_R_HANDSHAKE_FAILURE_ON_CLIENT_HELLO); | 
|  | } | 
|  | } | 
|  | bool retry; | 
|  | int bio_ret = ssl_handle_open_record(ssl, &retry, ret, consumed, alert); | 
|  | if (bio_ret <= 0) { | 
|  | return bio_ret; | 
|  | } | 
|  | if (retry) { | 
|  | continue; | 
|  | } | 
|  | ssl->s3->read_buffer.DiscardConsumed(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | case ssl_hs_read_end_of_early_data: { | 
|  | if (ssl->s3->hs->can_early_read) { | 
|  | // While we are processing early data, the handshake returns early. | 
|  | *out_early_return = true; | 
|  | return 1; | 
|  | } | 
|  | hs->wait = ssl_hs_ok; | 
|  | break; | 
|  | } | 
|  |  | 
|  | case ssl_hs_certificate_selection_pending: | 
|  | ssl->s3->rwstate = SSL_ERROR_PENDING_CERTIFICATE; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  |  | 
|  | case ssl_hs_handoff: | 
|  | ssl->s3->rwstate = SSL_ERROR_HANDOFF; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  |  | 
|  | case ssl_hs_handback: { | 
|  | int ret = ssl->method->flush(ssl); | 
|  | if (ret <= 0) { | 
|  | return ret; | 
|  | } | 
|  | ssl->s3->rwstate = SSL_ERROR_HANDBACK; | 
|  | hs->wait = ssl_hs_handback; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | // The following cases are associated with callback APIs which expect to | 
|  | // be called each time the state machine runs. Thus they set |hs->wait| | 
|  | // to |ssl_hs_ok| so that, next time, we re-enter the state machine and | 
|  | // call the callback again. | 
|  | case ssl_hs_x509_lookup: | 
|  | ssl->s3->rwstate = SSL_ERROR_WANT_X509_LOOKUP; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  | case ssl_hs_private_key_operation: | 
|  | ssl->s3->rwstate = SSL_ERROR_WANT_PRIVATE_KEY_OPERATION; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  | case ssl_hs_pending_session: | 
|  | ssl->s3->rwstate = SSL_ERROR_PENDING_SESSION; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  | case ssl_hs_pending_ticket: | 
|  | ssl->s3->rwstate = SSL_ERROR_PENDING_TICKET; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  | case ssl_hs_certificate_verify: | 
|  | ssl->s3->rwstate = SSL_ERROR_WANT_CERTIFICATE_VERIFY; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return -1; | 
|  |  | 
|  | case ssl_hs_early_data_rejected: | 
|  | assert(ssl->s3->early_data_reason != ssl_early_data_unknown); | 
|  | assert(!hs->can_early_write); | 
|  | ssl->s3->rwstate = SSL_ERROR_EARLY_DATA_REJECTED; | 
|  | return -1; | 
|  |  | 
|  | case ssl_hs_early_return: | 
|  | if (!ssl->server) { | 
|  | // On ECH reject, the handshake should never complete. | 
|  | assert(ssl->s3->ech_status != ssl_ech_rejected); | 
|  | } | 
|  | *out_early_return = true; | 
|  | hs->wait = ssl_hs_ok; | 
|  | return 1; | 
|  |  | 
|  | case ssl_hs_hints_ready: | 
|  | ssl->s3->rwstate = SSL_ERROR_HANDSHAKE_HINTS_READY; | 
|  | return -1; | 
|  |  | 
|  | case ssl_hs_ok: | 
|  | break; | 
|  | } | 
|  |  | 
|  | // Run the state machine again. | 
|  | hs->wait = ssl->do_handshake(hs); | 
|  | if (hs->wait == ssl_hs_error) { | 
|  | hs->error.reset(ERR_save_state()); | 
|  | return -1; | 
|  | } | 
|  | if (hs->wait == ssl_hs_ok) { | 
|  | if (!ssl->server) { | 
|  | // On ECH reject, the handshake should never complete. | 
|  | assert(ssl->s3->ech_status != ssl_ech_rejected); | 
|  | } | 
|  | // The handshake has completed. | 
|  | *out_early_return = false; | 
|  | return 1; | 
|  | } | 
|  | // If the handshake returns |ssl_hs_flush|, implicitly finish the flight. | 
|  | // This is a convenience so we do not need to manually insert this | 
|  | // throughout the handshake. | 
|  | if (hs->wait == ssl_hs_flush) { | 
|  | ssl->method->finish_flight(ssl); | 
|  | } | 
|  |  | 
|  | // Loop to the beginning and resolve what was blocking the handshake. | 
|  | } | 
|  | } | 
|  |  | 
|  | BSSL_NAMESPACE_END |