blob: d3063c9f0201e6d9a8b04a6b4bd2fde659a267cb [file] [log] [blame]
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com). */
#include <openssl/bn.h>
#include <assert.h>
#include <string.h>
#include <openssl/cpu.h>
#include <openssl/err.h>
#include <openssl/mem.h>
#include "internal.h"
#if !defined(OPENSSL_NO_ASM) && defined(OPENSSL_X86_64)
#define OPENSSL_BN_ASM_MONT5
#define RSAZ_ENABLED
#include "rsaz_exp.h"
#endif
int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) {
int i, bits, ret = 0;
BIGNUM *v, *rr;
if ((p->flags & BN_FLG_CONSTTIME) != 0) {
/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
OPENSSL_PUT_ERROR(BN, BN_exp, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
return 0;
}
BN_CTX_start(ctx);
if (r == a || r == p) {
rr = BN_CTX_get(ctx);
} else {
rr = r;
}
v = BN_CTX_get(ctx);
if (rr == NULL || v == NULL) {
goto err;
}
if (BN_copy(v, a) == NULL) {
goto err;
}
bits = BN_num_bits(p);
if (BN_is_odd(p)) {
if (BN_copy(rr, a) == NULL) {
goto err;
}
} else {
if (!BN_one(rr)) {
goto err;
}
}
for (i = 1; i < bits; i++) {
if (!BN_sqr(v, v, ctx)) {
goto err;
}
if (BN_is_bit_set(p, i)) {
if (!BN_mul(rr, rr, v, ctx)) {
goto err;
}
}
}
if (r != rr) {
BN_copy(r, rr);
}
ret = 1;
err:
BN_CTX_end(ctx);
return ret;
}
/* maximum precomputation table size for *variable* sliding windows */
#define TABLE_SIZE 32
typedef struct bn_recp_ctx_st {
BIGNUM N; /* the divisor */
BIGNUM Nr; /* the reciprocal */
int num_bits;
int shift;
int flags;
} BN_RECP_CTX;
static void BN_RECP_CTX_init(BN_RECP_CTX *recp) {
BN_init(&recp->N);
BN_init(&recp->Nr);
recp->num_bits = 0;
recp->flags = 0;
}
static void BN_RECP_CTX_free(BN_RECP_CTX *recp) {
if (recp == NULL) {
return;
}
BN_free(&recp->N);
BN_free(&recp->Nr);
}
static int BN_RECP_CTX_set(BN_RECP_CTX *recp, const BIGNUM *d, BN_CTX *ctx) {
if (!BN_copy(&(recp->N), d)) {
return 0;
}
BN_zero(&recp->Nr);
recp->num_bits = BN_num_bits(d);
recp->shift = 0;
return 1;
}
/* len is the expected size of the result We actually calculate with an extra
* word of precision, so we can do faster division if the remainder is not
* required.
* r := 2^len / m */
static int BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx) {
int ret = -1;
BIGNUM *t;
BN_CTX_start(ctx);
t = BN_CTX_get(ctx);
if (t == NULL) {
goto err;
}
if (!BN_set_bit(t, len)) {
goto err;
}
if (!BN_div(r, NULL, t, m, ctx)) {
goto err;
}
ret = len;
err:
BN_CTX_end(ctx);
return ret;
}
static int BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m,
BN_RECP_CTX *recp, BN_CTX *ctx) {
int i, j, ret = 0;
BIGNUM *a, *b, *d, *r;
BN_CTX_start(ctx);
a = BN_CTX_get(ctx);
b = BN_CTX_get(ctx);
if (dv != NULL) {
d = dv;
} else {
d = BN_CTX_get(ctx);
}
if (rem != NULL) {
r = rem;
} else {
r = BN_CTX_get(ctx);
}
if (a == NULL || b == NULL || d == NULL || r == NULL) {
goto err;
}
if (BN_ucmp(m, &(recp->N)) < 0) {
BN_zero(d);
if (!BN_copy(r, m)) {
return 0;
}
BN_CTX_end(ctx);
return 1;
}
/* We want the remainder
* Given input of ABCDEF / ab
* we need multiply ABCDEF by 3 digests of the reciprocal of ab */
/* i := max(BN_num_bits(m), 2*BN_num_bits(N)) */
i = BN_num_bits(m);
j = recp->num_bits << 1;
if (j > i) {
i = j;
}
/* Nr := round(2^i / N) */
if (i != recp->shift) {
recp->shift =
BN_reciprocal(&(recp->Nr), &(recp->N), i,
ctx); /* BN_reciprocal returns i, or -1 for an error */
}
if (recp->shift == -1) {
goto err;
}
/* d := |round(round(m / 2^BN_num_bits(N)) * recp->Nr / 2^(i -
* BN_num_bits(N)))|
* = |round(round(m / 2^BN_num_bits(N)) * round(2^i / N) / 2^(i -
* BN_num_bits(N)))|
* <= |(m / 2^BN_num_bits(N)) * (2^i / N) * (2^BN_num_bits(N) / 2^i)|
* = |m/N| */
if (!BN_rshift(a, m, recp->num_bits)) {
goto err;
}
if (!BN_mul(b, a, &(recp->Nr), ctx)) {
goto err;
}
if (!BN_rshift(d, b, i - recp->num_bits)) {
goto err;
}
d->neg = 0;
if (!BN_mul(b, &(recp->N), d, ctx)) {
goto err;
}
if (!BN_usub(r, m, b)) {
goto err;
}
r->neg = 0;
j = 0;
while (BN_ucmp(r, &(recp->N)) >= 0) {
if (j++ > 2) {
OPENSSL_PUT_ERROR(BN, BN_div_recp, BN_R_BAD_RECIPROCAL);
goto err;
}
if (!BN_usub(r, r, &(recp->N))) {
goto err;
}
if (!BN_add_word(d, 1)) {
goto err;
}
}
r->neg = BN_is_zero(r) ? 0 : m->neg;
d->neg = m->neg ^ recp->N.neg;
ret = 1;
err:
BN_CTX_end(ctx);
return ret;
}
static int BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y,
BN_RECP_CTX *recp, BN_CTX *ctx) {
int ret = 0;
BIGNUM *a;
const BIGNUM *ca;
BN_CTX_start(ctx);
a = BN_CTX_get(ctx);
if (a == NULL) {
goto err;
}
if (y != NULL) {
if (x == y) {
if (!BN_sqr(a, x, ctx)) {
goto err;
}
} else {
if (!BN_mul(a, x, y, ctx)) {
goto err;
}
}
ca = a;
} else {
ca = x; /* Just do the mod */
}
ret = BN_div_recp(NULL, r, ca, recp, ctx);
err:
BN_CTX_end(ctx);
return ret;
}
/* BN_window_bits_for_exponent_size -- macro for sliding window mod_exp
* functions
*
* For window size 'w' (w >= 2) and a random 'b' bits exponent, the number of
* multiplications is a constant plus on average
*
* 2^(w-1) + (b-w)/(w+1);
*
* here 2^(w-1) is for precomputing the table (we actually need entries only
* for windows that have the lowest bit set), and (b-w)/(w+1) is an
* approximation for the expected number of w-bit windows, not counting the
* first one.
*
* Thus we should use
*
* w >= 6 if b > 671
* w = 5 if 671 > b > 239
* w = 4 if 239 > b > 79
* w = 3 if 79 > b > 23
* w <= 2 if 23 > b
*
* (with draws in between). Very small exponents are often selected
* with low Hamming weight, so we use w = 1 for b <= 23. */
#define BN_window_bits_for_exponent_size(b) \
((b) > 671 ? 6 : \
(b) > 239 ? 5 : \
(b) > 79 ? 4 : \
(b) > 23 ? 3 : 1)
static int mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
const BIGNUM *m, BN_CTX *ctx) {
int i, j, bits, ret = 0, wstart, window;
int start = 1;
BIGNUM *aa;
/* Table of variables obtained from 'ctx' */
BIGNUM *val[TABLE_SIZE];
BN_RECP_CTX recp;
if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) {
/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
OPENSSL_PUT_ERROR(BN, mod_exp_recp, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
return 0;
}
bits = BN_num_bits(p);
if (bits == 0) {
ret = BN_one(r);
return ret;
}
BN_CTX_start(ctx);
aa = BN_CTX_get(ctx);
val[0] = BN_CTX_get(ctx);
if (!aa || !val[0]) {
goto err;
}
BN_RECP_CTX_init(&recp);
if (m->neg) {
/* ignore sign of 'm' */
if (!BN_copy(aa, m)) {
goto err;
}
aa->neg = 0;
if (BN_RECP_CTX_set(&recp, aa, ctx) <= 0) {
goto err;
}
} else {
if (BN_RECP_CTX_set(&recp, m, ctx) <= 0) {
goto err;
}
}
if (!BN_nnmod(val[0], a, m, ctx)) {
goto err; /* 1 */
}
if (BN_is_zero(val[0])) {
BN_zero(r);
ret = 1;
goto err;
}
window = BN_window_bits_for_exponent_size(bits);
if (window > 1) {
if (!BN_mod_mul_reciprocal(aa, val[0], val[0], &recp, ctx)) {
goto err; /* 2 */
}
j = 1 << (window - 1);
for (i = 1; i < j; i++) {
if (((val[i] = BN_CTX_get(ctx)) == NULL) ||
!BN_mod_mul_reciprocal(val[i], val[i - 1], aa, &recp, ctx)) {
goto err;
}
}
}
start = 1; /* This is used to avoid multiplication etc
* when there is only the value '1' in the
* buffer. */
wstart = bits - 1; /* The top bit of the window */
if (!BN_one(r)) {
goto err;
}
for (;;) {
int wvalue; /* The 'value' of the window */
int wend; /* The bottom bit of the window */
if (BN_is_bit_set(p, wstart) == 0) {
if (!start) {
if (!BN_mod_mul_reciprocal(r, r, r, &recp, ctx)) {
goto err;
}
}
if (wstart == 0) {
break;
}
wstart--;
continue;
}
/* We now have wstart on a 'set' bit, we now need to work out
* how bit a window to do. To do this we need to scan
* forward until the last set bit before the end of the
* window */
wvalue = 1;
wend = 0;
for (i = 1; i < window; i++) {
if (wstart - i < 0) {
break;
}
if (BN_is_bit_set(p, wstart - i)) {
wvalue <<= (i - wend);
wvalue |= 1;
wend = i;
}
}
/* wend is the size of the current window */
j = wend + 1;
/* add the 'bytes above' */
if (!start) {
for (i = 0; i < j; i++) {
if (!BN_mod_mul_reciprocal(r, r, r, &recp, ctx)) {
goto err;
}
}
}
/* wvalue will be an odd number < 2^window */
if (!BN_mod_mul_reciprocal(r, r, val[wvalue >> 1], &recp, ctx)) {
goto err;
}
/* move the 'window' down further */
wstart -= wend + 1;
start = 0;
if (wstart < 0) {
break;
}
}
ret = 1;
err:
BN_CTX_end(ctx);
BN_RECP_CTX_free(&recp);
return ret;
}
int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
BN_CTX *ctx) {
/* For even modulus m = 2^k*m_odd, it might make sense to compute
* a^p mod m_odd and a^p mod 2^k separately (with Montgomery
* exponentiation for the odd part), using appropriate exponent
* reductions, and combine the results using the CRT.
*
* For now, we use Montgomery only if the modulus is odd; otherwise,
* exponentiation using the reciprocal-based quick remaindering
* algorithm is used.
*
* (Timing obtained with expspeed.c [computations a^p mod m
* where a, p, m are of the same length: 256, 512, 1024, 2048,
* 4096, 8192 bits], compared to the running time of the
* standard algorithm:
*
* BN_mod_exp_mont 33 .. 40 % [AMD K6-2, Linux, debug configuration]
* 55 .. 77 % [UltraSparc processor, but
* debug-solaris-sparcv8-gcc conf.]
*
* BN_mod_exp_recp 50 .. 70 % [AMD K6-2, Linux, debug configuration]
* 62 .. 118 % [UltraSparc, debug-solaris-sparcv8-gcc]
*
* On the Sparc, BN_mod_exp_recp was faster than BN_mod_exp_mont
* at 2048 and more bits, but at 512 and 1024 bits, it was
* slower even than the standard algorithm!
*
* "Real" timings [linux-elf, solaris-sparcv9-gcc configurations]
* should be obtained when the new Montgomery reduction code
* has been integrated into OpenSSL.) */
if (BN_is_odd(m)) {
if (a->top == 1 && !a->neg && BN_get_flags(p, BN_FLG_CONSTTIME) == 0) {
BN_ULONG A = a->d[0];
return BN_mod_exp_mont_word(r, A, p, m, ctx, NULL);
}
return BN_mod_exp_mont(r, a, p, m, ctx, NULL);
}
return mod_exp_recp(r, a, p, m, ctx);
}
int BN_mod_exp_mont(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont) {
int i, j, bits, ret = 0, wstart, window;
int start = 1;
BIGNUM *d, *r;
const BIGNUM *aa;
/* Table of variables obtained from 'ctx' */
BIGNUM *val[TABLE_SIZE];
BN_MONT_CTX *mont = NULL;
if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) {
return BN_mod_exp_mont_consttime(rr, a, p, m, ctx, in_mont);
}
if (!BN_is_odd(m)) {
OPENSSL_PUT_ERROR(BN, BN_mod_exp_mont, BN_R_CALLED_WITH_EVEN_MODULUS);
return 0;
}
bits = BN_num_bits(p);
if (bits == 0) {
ret = BN_one(rr);
return ret;
}
BN_CTX_start(ctx);
d = BN_CTX_get(ctx);
r = BN_CTX_get(ctx);
val[0] = BN_CTX_get(ctx);
if (!d || !r || !val[0]) {
goto err;
}
/* If this is not done, things will break in the montgomery part */
if (in_mont != NULL) {
mont = in_mont;
} else {
mont = BN_MONT_CTX_new();
if (mont == NULL) {
goto err;
}
if (!BN_MONT_CTX_set(mont, m, ctx)) {
goto err;
}
}
if (a->neg || BN_ucmp(a, m) >= 0) {
if (!BN_nnmod(val[0], a, m, ctx)) {
goto err;
}
aa = val[0];
} else {
aa = a;
}
if (BN_is_zero(aa)) {
BN_zero(rr);
ret = 1;
goto err;
}
if (!BN_to_montgomery(val[0], aa, mont, ctx)) {
goto err; /* 1 */
}
window = BN_window_bits_for_exponent_size(bits);
if (window > 1) {
if (!BN_mod_mul_montgomery(d, val[0], val[0], mont, ctx)) {
goto err; /* 2 */
}
j = 1 << (window - 1);
for (i = 1; i < j; i++) {
if (((val[i] = BN_CTX_get(ctx)) == NULL) ||
!BN_mod_mul_montgomery(val[i], val[i - 1], d, mont, ctx)) {
goto err;
}
}
}
start = 1; /* This is used to avoid multiplication etc
* when there is only the value '1' in the
* buffer. */
wstart = bits - 1; /* The top bit of the window */
j = m->top; /* borrow j */
if (m->d[j - 1] & (((BN_ULONG)1) << (BN_BITS2 - 1))) {
if (bn_wexpand(r, j) == NULL) {
goto err;
}
/* 2^(top*BN_BITS2) - m */
r->d[0] = (0 - m->d[0]) & BN_MASK2;
for (i = 1; i < j; i++) {
r->d[i] = (~m->d[i]) & BN_MASK2;
}
r->top = j;
/* Upper words will be zero if the corresponding words of 'm'
* were 0xfff[...], so decrement r->top accordingly. */
bn_correct_top(r);
} else if (!BN_to_montgomery(r, BN_value_one(), mont, ctx)) {
goto err;
}
for (;;) {
int wvalue; /* The 'value' of the window */
int wend; /* The bottom bit of the window */
if (BN_is_bit_set(p, wstart) == 0) {
if (!start && !BN_mod_mul_montgomery(r, r, r, mont, ctx)) {
goto err;
}
if (wstart == 0) {
break;
}
wstart--;
continue;
}
/* We now have wstart on a 'set' bit, we now need to work out how bit a
* window to do. To do this we need to scan forward until the last set bit
* before the end of the window */
wvalue = 1;
wend = 0;
for (i = 1; i < window; i++) {
if (wstart - i < 0) {
break;
}
if (BN_is_bit_set(p, wstart - i)) {
wvalue <<= (i - wend);
wvalue |= 1;
wend = i;
}
}
/* wend is the size of the current window */
j = wend + 1;
/* add the 'bytes above' */
if (!start) {
for (i = 0; i < j; i++) {
if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) {
goto err;
}
}
}
/* wvalue will be an odd number < 2^window */
if (!BN_mod_mul_montgomery(r, r, val[wvalue >> 1], mont, ctx)) {
goto err;
}
/* move the 'window' down further */
wstart -= wend + 1;
start = 0;
if (wstart < 0) {
break;
}
}
if (!BN_from_montgomery(rr, r, mont, ctx)) {
goto err;
}
ret = 1;
err:
if (in_mont == NULL) {
BN_MONT_CTX_free(mont);
}
BN_CTX_end(ctx);
return ret;
}
/* BN_mod_exp_mont_consttime() stores the precomputed powers in a specific
* layout so that accessing any of these table values shows the same access
* pattern as far as cache lines are concerned. The following functions are
* used to transfer a BIGNUM from/to that table. */
static int copy_to_prebuf(const BIGNUM *b, int top, unsigned char *buf, int idx,
int width) {
size_t i, j;
if (top > b->top) {
top = b->top; /* this works because 'buf' is explicitly zeroed */
}
for (i = 0, j = idx; i < top * sizeof b->d[0]; i++, j += width) {
buf[j] = ((unsigned char *)b->d)[i];
}
return 1;
}
static int copy_from_prebuf(BIGNUM *b, int top, unsigned char *buf, int idx,
int width) {
size_t i, j;
if (bn_wexpand(b, top) == NULL) {
return 0;
}
for (i = 0, j = idx; i < top * sizeof b->d[0]; i++, j += width) {
((unsigned char *)b->d)[i] = buf[j];
}
b->top = top;
bn_correct_top(b);
return 1;
}
/* BN_mod_exp_mont_conttime is based on the assumption that the L1 data cache
* line width of the target processor is at least the following value. */
#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH (64)
#define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK \
(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1)
/* Window sizes optimized for fixed window size modular exponentiation
* algorithm (BN_mod_exp_mont_consttime).
*
* To achieve the security goals of BN_mode_exp_mont_consttime, the maximum
* size of the window must not exceed
* log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH).
*
* Window size thresholds are defined for cache line sizes of 32 and 64, cache
* line sizes where log_2(32)=5 and log_2(64)=6 respectively. A window size of
* 7 should only be used on processors that have a 128 byte or greater cache
* line size. */
#if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64
#define BN_window_bits_for_ctime_exponent_size(b) \
((b) > 937 ? 6 : (b) > 306 ? 5 : (b) > 89 ? 4 : (b) > 22 ? 3 : 1)
#define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6)
#elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32
#define BN_window_bits_for_ctime_exponent_size(b) \
((b) > 306 ? 5 : (b) > 89 ? 4 : (b) > 22 ? 3 : 1)
#define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5)
#endif
/* Given a pointer value, compute the next address that is a cache line
* multiple. */
#define MOD_EXP_CTIME_ALIGN(x_) \
((unsigned char *)(x_) + \
(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - \
(((size_t)(x_)) & (MOD_EXP_CTIME_MIN_CACHE_LINE_MASK))))
/* This variant of BN_mod_exp_mont() uses fixed windows and the special
* precomputation memory layout to limit data-dependency to a minimum
* to protect secret exponents (cf. the hyper-threading timing attacks
* pointed out by Colin Percival,
* http://www.daemonology.net/hyperthreading-considered-harmful/)
*/
int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
const BIGNUM *m, BN_CTX *ctx,
BN_MONT_CTX *in_mont) {
int i, bits, ret = 0, window, wvalue;
int top;
BN_MONT_CTX *mont = NULL;
int numPowers;
unsigned char *powerbufFree = NULL;
int powerbufLen = 0;
unsigned char *powerbuf = NULL;
BIGNUM tmp, am;
top = m->top;
if (!(m->d[0] & 1)) {
OPENSSL_PUT_ERROR(BN, BN_mod_exp_mont_consttime,
BN_R_CALLED_WITH_EVEN_MODULUS);
return 0;
}
bits = BN_num_bits(p);
if (bits == 0) {
ret = BN_one(rr);
return ret;
}
BN_CTX_start(ctx);
/* Allocate a montgomery context if it was not supplied by the caller.
* If this is not done, things will break in the montgomery part. */
if (in_mont != NULL) {
mont = in_mont;
} else {
mont = BN_MONT_CTX_new();
if (mont == NULL || !BN_MONT_CTX_set(mont, m, ctx)) {
goto err;
}
}
#ifdef RSAZ_ENABLED
/* If the size of the operands allow it, perform the optimized
* RSAZ exponentiation. For further information see
* crypto/bn/rsaz_exp.c and accompanying assembly modules. */
if ((16 == a->top) && (16 == p->top) && (BN_num_bits(m) == 1024) &&
rsaz_avx2_eligible()) {
if (NULL == bn_wexpand(rr, 16)) {
goto err;
}
RSAZ_1024_mod_exp_avx2(rr->d, a->d, p->d, m->d, mont->RR.d, mont->n0[0]);
rr->top = 16;
rr->neg = 0;
bn_correct_top(rr);
ret = 1;
goto err;
} else if ((8 == a->top) && (8 == p->top) && (BN_num_bits(m) == 512)) {
if (NULL == bn_wexpand(rr, 8)) {
goto err;
}
RSAZ_512_mod_exp(rr->d, a->d, p->d, m->d, mont->n0[0], mont->RR.d);
rr->top = 8;
rr->neg = 0;
bn_correct_top(rr);
ret = 1;
goto err;
}
#endif
/* Get the window size to use with size of p. */
window = BN_window_bits_for_ctime_exponent_size(bits);
#if defined(OPENSSL_BN_ASM_MONT5)
if (window >= 5) {
window = 5; /* ~5% improvement for RSA2048 sign, and even for RSA4096 */
if ((top & 7) == 0) {
powerbufLen += 2 * top * sizeof(m->d[0]);
}
}
#endif
(void)0;
/* Allocate a buffer large enough to hold all of the pre-computed
* powers of am, am itself and tmp.
*/
numPowers = 1 << window;
powerbufLen +=
sizeof(m->d[0]) *
(top * numPowers + ((2 * top) > numPowers ? (2 * top) : numPowers));
#ifdef alloca
if (powerbufLen < 3072) {
powerbufFree = alloca(powerbufLen + MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH);
} else
#endif
{
if ((powerbufFree = (unsigned char *)OPENSSL_malloc(
powerbufLen + MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH)) == NULL) {
goto err;
}
}
powerbuf = MOD_EXP_CTIME_ALIGN(powerbufFree);
memset(powerbuf, 0, powerbufLen);
#ifdef alloca
if (powerbufLen < 3072) {
powerbufFree = NULL;
}
#endif
/* lay down tmp and am right after powers table */
tmp.d = (BN_ULONG *)(powerbuf + sizeof(m->d[0]) * top * numPowers);
am.d = tmp.d + top;
tmp.top = am.top = 0;
tmp.dmax = am.dmax = top;
tmp.neg = am.neg = 0;
tmp.flags = am.flags = BN_FLG_STATIC_DATA;
/* prepare a^0 in Montgomery domain */
/* by Shay Gueron's suggestion */
if (m->d[top - 1] & (((BN_ULONG)1) << (BN_BITS2 - 1))) {
/* 2^(top*BN_BITS2) - m */
tmp.d[0] = (0 - m->d[0]) & BN_MASK2;
for (i = 1; i < top; i++) {
tmp.d[i] = (~m->d[i]) & BN_MASK2;
}
tmp.top = top;
} else if (!BN_to_montgomery(&tmp, BN_value_one(), mont, ctx)) {
goto err;
}
/* prepare a^1 in Montgomery domain */
if (a->neg || BN_ucmp(a, m) >= 0) {
if (!BN_mod(&am, a, m, ctx) ||
!BN_to_montgomery(&am, &am, mont, ctx)) {
goto err;
}
} else if (!BN_to_montgomery(&am, a, mont, ctx)) {
goto err;
}
#if defined(OPENSSL_BN_ASM_MONT5)
/* This optimization uses ideas from http://eprint.iacr.org/2011/239,
* specifically optimization of cache-timing attack countermeasures
* and pre-computation optimization. */
/* Dedicated window==4 case improves 512-bit RSA sign by ~15%, but as
* 512-bit RSA is hardly relevant, we omit it to spare size... */
if (window == 5 && top > 1) {
void bn_mul_mont_gather5(BN_ULONG * rp, const BN_ULONG * ap,
const void * table, const BN_ULONG * np,
const BN_ULONG * n0, int num, int power);
void bn_scatter5(const BN_ULONG * inp, size_t num, void * table,
size_t power);
void bn_gather5(BN_ULONG * out, size_t num, void * table, size_t power);
void bn_power5(BN_ULONG * rp, const BN_ULONG * ap, const void * table,
const BN_ULONG * np, const BN_ULONG * n0, int num,
int power);
int bn_from_montgomery(BN_ULONG * rp, const BN_ULONG * ap,
const BN_ULONG * not_used, const BN_ULONG * np,
const BN_ULONG * n0, int num);
BN_ULONG *np = mont->N.d, *n0 = mont->n0, *np2;
/* BN_to_montgomery can contaminate words above .top
* [in BN_DEBUG[_DEBUG] build]... */
for (i = am.top; i < top; i++) {
am.d[i] = 0;
}
for (i = tmp.top; i < top; i++) {
tmp.d[i] = 0;
}
if (top & 7) {
np2 = np;
} else {
for (np2 = am.d + top, i = 0; i < top; i++) {
np2[2 * i] = np[i];
}
}
bn_scatter5(tmp.d, top, powerbuf, 0);
bn_scatter5(am.d, am.top, powerbuf, 1);
bn_mul_mont(tmp.d, am.d, am.d, np, n0, top);
bn_scatter5(tmp.d, top, powerbuf, 2);
/* same as above, but uses squaring for 1/2 of operations */
for (i = 4; i < 32; i *= 2) {
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_scatter5(tmp.d, top, powerbuf, i);
}
for (i = 3; i < 8; i += 2) {
int j;
bn_mul_mont_gather5(tmp.d, am.d, powerbuf, np2, n0, top, i - 1);
bn_scatter5(tmp.d, top, powerbuf, i);
for (j = 2 * i; j < 32; j *= 2) {
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_scatter5(tmp.d, top, powerbuf, j);
}
}
for (; i < 16; i += 2) {
bn_mul_mont_gather5(tmp.d, am.d, powerbuf, np2, n0, top, i - 1);
bn_scatter5(tmp.d, top, powerbuf, i);
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_scatter5(tmp.d, top, powerbuf, 2 * i);
}
for (; i < 32; i += 2) {
bn_mul_mont_gather5(tmp.d, am.d, powerbuf, np2, n0, top, i - 1);
bn_scatter5(tmp.d, top, powerbuf, i);
}
bits--;
for (wvalue = 0, i = bits % 5; i >= 0; i--, bits--) {
wvalue = (wvalue << 1) + BN_is_bit_set(p, bits);
}
bn_gather5(tmp.d, top, powerbuf, wvalue);
/* At this point |bits| is 4 mod 5 and at least -1. (|bits| is the first bit
* that has not been read yet.) */
assert(bits >= -1 && (bits == -1 || bits % 5 == 4));
/* Scan the exponent one window at a time starting from the most
* significant bits.
*/
if (top & 7) {
while (bits >= 0) {
for (wvalue = 0, i = 0; i < 5; i++, bits--) {
wvalue = (wvalue << 1) + BN_is_bit_set(p, bits);
}
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_mul_mont(tmp.d, tmp.d, tmp.d, np, n0, top);
bn_mul_mont_gather5(tmp.d, tmp.d, powerbuf, np, n0, top, wvalue);
}
} else {
const uint8_t *p_bytes = (const uint8_t *)p->d;
int max_bits = p->top * BN_BITS2;
assert(bits < max_bits);
/* |p = 0| has been handled as a special case, so |max_bits| is at least
* one word. */
assert(max_bits >= 64);
/* If the first bit to be read lands in the last byte, unroll the first
* iteration to avoid reading past the bounds of |p->d|. (After the first
* iteration, we are guaranteed to be past the last byte.) Note |bits|
* here is the top bit, inclusive. */
if (bits - 4 >= max_bits - 8) {
/* Read five bits from |bits-4| through |bits|, inclusive. */
wvalue = p_bytes[p->top * BN_BYTES - 1];
wvalue >>= (bits - 4) & 7;
wvalue &= 0x1f;
bits -= 5;
bn_power5(tmp.d, tmp.d, powerbuf, np2, n0, top, wvalue);
}
while (bits >= 0) {
/* Read five bits from |bits-4| through |bits|, inclusive. */
int first_bit = bits - 4;
wvalue = *(const uint16_t *) (p_bytes + (first_bit >> 3));
wvalue >>= first_bit & 7;
wvalue &= 0x1f;
bits -= 5;
bn_power5(tmp.d, tmp.d, powerbuf, np2, n0, top, wvalue);
}
}
ret = bn_from_montgomery(tmp.d, tmp.d, NULL, np2, n0, top);
tmp.top = top;
bn_correct_top(&tmp);
if (ret) {
if (!BN_copy(rr, &tmp)) {
ret = 0;
}
goto err; /* non-zero ret means it's not error */
}
} else
#endif
{
if (!copy_to_prebuf(&tmp, top, powerbuf, 0, numPowers) ||
!copy_to_prebuf(&am, top, powerbuf, 1, numPowers)) {
goto err;
}
/* If the window size is greater than 1, then calculate
* val[i=2..2^winsize-1]. Powers are computed as a*a^(i-1)
* (even powers could instead be computed as (a^(i/2))^2
* to use the slight performance advantage of sqr over mul).
*/
if (window > 1) {
if (!BN_mod_mul_montgomery(&tmp, &am, &am, mont, ctx) ||
!copy_to_prebuf(&tmp, top, powerbuf, 2, numPowers)) {
goto err;
}
for (i = 3; i < numPowers; i++) {
/* Calculate a^i = a^(i-1) * a */
if (!BN_mod_mul_montgomery(&tmp, &am, &tmp, mont, ctx) ||
!copy_to_prebuf(&tmp, top, powerbuf, i, numPowers)) {
goto err;
}
}
}
bits--;
for (wvalue = 0, i = bits % window; i >= 0; i--, bits--) {
wvalue = (wvalue << 1) + BN_is_bit_set(p, bits);
}
if (!copy_from_prebuf(&tmp, top, powerbuf, wvalue, numPowers)) {
goto err;
}
/* Scan the exponent one window at a time starting from the most
* significant bits.
*/
while (bits >= 0) {
wvalue = 0; /* The 'value' of the window */
/* Scan the window, squaring the result as we go */
for (i = 0; i < window; i++, bits--) {
if (!BN_mod_mul_montgomery(&tmp, &tmp, &tmp, mont, ctx)) {
goto err;
}
wvalue = (wvalue << 1) + BN_is_bit_set(p, bits);
}
/* Fetch the appropriate pre-computed value from the pre-buf */
if (!copy_from_prebuf(&am, top, powerbuf, wvalue, numPowers)) {
goto err;
}
/* Multiply the result into the intermediate result */
if (!BN_mod_mul_montgomery(&tmp, &tmp, &am, mont, ctx)) {
goto err;
}
}
}
/* Convert the final result from montgomery to standard format */
if (!BN_from_montgomery(rr, &tmp, mont, ctx)) {
goto err;
}
ret = 1;
err:
if (in_mont == NULL) {
BN_MONT_CTX_free(mont);
}
if (powerbuf != NULL) {
OPENSSL_cleanse(powerbuf, powerbufLen);
OPENSSL_free(powerbufFree);
}
BN_CTX_end(ctx);
return (ret);
}
int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont) {
BN_MONT_CTX *mont = NULL;
int b, bits, ret = 0;
int r_is_one;
BN_ULONG w, next_w;
BIGNUM *d, *r, *t;
BIGNUM *swap_tmp;
#define BN_MOD_MUL_WORD(r, w, m) \
(BN_mul_word(r, (w)) && \
(/* BN_ucmp(r, (m)) < 0 ? 1 :*/ \
(BN_mod(t, r, m, ctx) && (swap_tmp = r, r = t, t = swap_tmp, 1))))
/* BN_MOD_MUL_WORD is only used with 'w' large, so the BN_ucmp test is
* probably more overhead than always using BN_mod (which uses BN_copy if a
* similar test returns true). We can use BN_mod and do not need BN_nnmod
* because our accumulator is never negative (the result of BN_mod does not
* depend on the sign of the modulus). */
#define BN_TO_MONTGOMERY_WORD(r, w, mont) \
(BN_set_word(r, (w)) && BN_to_montgomery(r, r, (mont), ctx))
if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0) {
/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
OPENSSL_PUT_ERROR(BN, BN_mod_exp_mont_word,
ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
return 0;
}
if (!BN_is_odd(m)) {
OPENSSL_PUT_ERROR(BN, BN_mod_exp_mont_word, BN_R_CALLED_WITH_EVEN_MODULUS);
return 0;
}
if (m->top == 1) {
a %= m->d[0]; /* make sure that 'a' is reduced */
}
bits = BN_num_bits(p);
if (bits == 0) {
/* x**0 mod 1 is still zero. */
if (BN_is_one(m)) {
ret = 1;
BN_zero(rr);
} else {
ret = BN_one(rr);
}
return ret;
}
if (a == 0) {
BN_zero(rr);
ret = 1;
return ret;
}
BN_CTX_start(ctx);
d = BN_CTX_get(ctx);
r = BN_CTX_get(ctx);
t = BN_CTX_get(ctx);
if (d == NULL || r == NULL || t == NULL) {
goto err;
}
if (in_mont != NULL) {
mont = in_mont;
} else {
mont = BN_MONT_CTX_new();
if (mont == NULL || !BN_MONT_CTX_set(mont, m, ctx)) {
goto err;
}
}
r_is_one = 1; /* except for Montgomery factor */
/* bits-1 >= 0 */
/* The result is accumulated in the product r*w. */
w = a; /* bit 'bits-1' of 'p' is always set */
for (b = bits - 2; b >= 0; b--) {
/* First, square r*w. */
next_w = w * w;
if ((next_w / w) != w) {
/* overflow */
if (r_is_one) {
if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) {
goto err;
}
r_is_one = 0;
} else {
if (!BN_MOD_MUL_WORD(r, w, m)) {
goto err;
}
}
next_w = 1;
}
w = next_w;
if (!r_is_one) {
if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) {
goto err;
}
}
/* Second, multiply r*w by 'a' if exponent bit is set. */
if (BN_is_bit_set(p, b)) {
next_w = w * a;
if ((next_w / a) != w) {
/* overflow */
if (r_is_one) {
if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) {
goto err;
}
r_is_one = 0;
} else {
if (!BN_MOD_MUL_WORD(r, w, m)) {
goto err;
}
}
next_w = a;
}
w = next_w;
}
}
/* Finally, set r:=r*w. */
if (w != 1) {
if (r_is_one) {
if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) {
goto err;
}
r_is_one = 0;
} else {
if (!BN_MOD_MUL_WORD(r, w, m)) {
goto err;
}
}
}
if (r_is_one) {
/* can happen only if a == 1*/
if (!BN_one(rr)) {
goto err;
}
} else {
if (!BN_from_montgomery(rr, r, mont, ctx)) {
goto err;
}
}
ret = 1;
err:
if (in_mont == NULL) {
BN_MONT_CTX_free(mont);
}
BN_CTX_end(ctx);
return ret;
}
#define TABLE_SIZE 32
int BN_mod_exp2_mont(BIGNUM *rr, const BIGNUM *a1, const BIGNUM *p1,
const BIGNUM *a2, const BIGNUM *p2, const BIGNUM *m,
BN_CTX *ctx, BN_MONT_CTX *in_mont) {
int i, j, bits, b, bits1, bits2, ret = 0, wpos1, wpos2, window1, window2,
wvalue1, wvalue2;
int r_is_one = 1;
BIGNUM *d, *r;
const BIGNUM *a_mod_m;
/* Tables of variables obtained from 'ctx' */
BIGNUM *val1[TABLE_SIZE], *val2[TABLE_SIZE];
BN_MONT_CTX *mont = NULL;
if (!(m->d[0] & 1)) {
OPENSSL_PUT_ERROR(BN, BN_mod_exp2_mont, BN_R_CALLED_WITH_EVEN_MODULUS);
return 0;
}
bits1 = BN_num_bits(p1);
bits2 = BN_num_bits(p2);
if (bits1 == 0 && bits2 == 0) {
ret = BN_one(rr);
return ret;
}
bits = (bits1 > bits2) ? bits1 : bits2;
BN_CTX_start(ctx);
d = BN_CTX_get(ctx);
r = BN_CTX_get(ctx);
val1[0] = BN_CTX_get(ctx);
val2[0] = BN_CTX_get(ctx);
if (!d || !r || !val1[0] || !val2[0]) {
goto err;
}
if (in_mont != NULL) {
mont = in_mont;
} else {
mont = BN_MONT_CTX_new();
if (mont == NULL) {
goto err;
}
if (!BN_MONT_CTX_set(mont, m, ctx)) {
goto err;
}
}
window1 = BN_window_bits_for_exponent_size(bits1);
window2 = BN_window_bits_for_exponent_size(bits2);
/* Build table for a1: val1[i] := a1^(2*i + 1) mod m for i = 0 ..
* 2^(window1-1) */
if (a1->neg || BN_ucmp(a1, m) >= 0) {
if (!BN_mod(val1[0], a1, m, ctx)) {
goto err;
}
a_mod_m = val1[0];
} else {
a_mod_m = a1;
}
if (BN_is_zero(a_mod_m)) {
BN_zero(rr);
ret = 1;
goto err;
}
if (!BN_to_montgomery(val1[0], a_mod_m, mont, ctx)) {
goto err;
}
if (window1 > 1) {
if (!BN_mod_mul_montgomery(d, val1[0], val1[0], mont, ctx)) {
goto err;
}
j = 1 << (window1 - 1);
for (i = 1; i < j; i++) {
if (((val1[i] = BN_CTX_get(ctx)) == NULL) ||
!BN_mod_mul_montgomery(val1[i], val1[i - 1], d, mont, ctx)) {
goto err;
}
}
}
/* Build table for a2: val2[i] := a2^(2*i + 1) mod m for i = 0 ..
* 2^(window2-1) */
if (a2->neg || BN_ucmp(a2, m) >= 0) {
if (!BN_mod(val2[0], a2, m, ctx)) {
goto err;
}
a_mod_m = val2[0];
} else {
a_mod_m = a2;
}
if (BN_is_zero(a_mod_m)) {
BN_zero(rr);
ret = 1;
goto err;
}
if (!BN_to_montgomery(val2[0], a_mod_m, mont, ctx)) {
goto err;
}
if (window2 > 1) {
if (!BN_mod_mul_montgomery(d, val2[0], val2[0], mont, ctx)) {
goto err;
}
j = 1 << (window2 - 1);
for (i = 1; i < j; i++) {
if (((val2[i] = BN_CTX_get(ctx)) == NULL) ||
!BN_mod_mul_montgomery(val2[i], val2[i - 1], d, mont, ctx)) {
goto err;
}
}
}
/* Now compute the power product, using independent windows. */
r_is_one = 1;
wvalue1 = 0; /* The 'value' of the first window */
wvalue2 = 0; /* The 'value' of the second window */
wpos1 = 0; /* If wvalue1 > 0, the bottom bit of the first window */
wpos2 = 0; /* If wvalue2 > 0, the bottom bit of the second window */
if (!BN_to_montgomery(r, BN_value_one(), mont, ctx)) {
goto err;
}
for (b = bits - 1; b >= 0; b--) {
if (!r_is_one) {
if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) {
goto err;
}
}
if (!wvalue1 && BN_is_bit_set(p1, b)) {
/* consider bits b-window1+1 .. b for this window */
i = b - window1 + 1;
/* works for i<0 */
while (!BN_is_bit_set(p1, i)) {
i++;
}
wpos1 = i;
wvalue1 = 1;
for (i = b - 1; i >= wpos1; i--) {
wvalue1 <<= 1;
if (BN_is_bit_set(p1, i)) {
wvalue1++;
}
}
}
if (!wvalue2 && BN_is_bit_set(p2, b)) {
/* consider bits b-window2+1 .. b for this window */
i = b - window2 + 1;
while (!BN_is_bit_set(p2, i)) {
i++;
}
wpos2 = i;
wvalue2 = 1;
for (i = b - 1; i >= wpos2; i--) {
wvalue2 <<= 1;
if (BN_is_bit_set(p2, i)) {
wvalue2++;
}
}
}
if (wvalue1 && b == wpos1) {
/* wvalue1 is odd and < 2^window1 */
if (!BN_mod_mul_montgomery(r, r, val1[wvalue1 >> 1], mont, ctx)) {
goto err;
}
wvalue1 = 0;
r_is_one = 0;
}
if (wvalue2 && b == wpos2) {
/* wvalue2 is odd and < 2^window2 */
if (!BN_mod_mul_montgomery(r, r, val2[wvalue2 >> 1], mont, ctx)) {
goto err;
}
wvalue2 = 0;
r_is_one = 0;
}
}
if (!BN_from_montgomery(rr, r, mont, ctx)) {
goto err;
}
ret = 1;
err:
if (in_mont == NULL) {
BN_MONT_CTX_free(mont);
}
BN_CTX_end(ctx);
return ret;
}