| // Copyright 2015 The Chromium Authors |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "parse_values.h" |
| |
| #include <stdlib.h> |
| |
| #include <tuple> |
| |
| #include <openssl/base.h> |
| #include <openssl/bytestring.h> |
| #include <openssl/mem.h> |
| |
| namespace bssl::der { |
| |
| namespace { |
| |
| bool ParseBoolInternal(const Input &in, bool *out, bool relaxed) { |
| // According to ITU-T X.690 section 8.2, a bool is encoded as a single octet |
| // where the octet of all zeroes is FALSE and a non-zero value for the octet |
| // is TRUE. |
| if (in.Length() != 1) { |
| return false; |
| } |
| ByteReader data(in); |
| uint8_t byte; |
| if (!data.ReadByte(&byte)) { |
| return false; |
| } |
| if (byte == 0) { |
| *out = false; |
| return true; |
| } |
| // ITU-T X.690 section 11.1 specifies that for DER, the TRUE value must be |
| // encoded as an octet of all ones. |
| if (byte == 0xff || relaxed) { |
| *out = true; |
| return true; |
| } |
| return false; |
| } |
| |
| // Reads a positive decimal number with |digits| digits and stores it in |
| // |*out|. This function does not check that the type of |*out| is large |
| // enough to hold 10^digits - 1; the caller must choose an appropriate type |
| // based on the number of digits they wish to parse. |
| template <typename UINT> |
| bool DecimalStringToUint(ByteReader &in, size_t digits, UINT *out) { |
| UINT value = 0; |
| for (size_t i = 0; i < digits; ++i) { |
| uint8_t digit; |
| if (!in.ReadByte(&digit)) { |
| return false; |
| } |
| if (digit < '0' || digit > '9') { |
| return false; |
| } |
| value = (value * 10) + (digit - '0'); |
| } |
| *out = value; |
| return true; |
| } |
| |
| // Checks that the values in a GeneralizedTime struct are valid. This involves |
| // checking that the year is 4 digits, the month is between 1 and 12, the day |
| // is a day that exists in that month (following current leap year rules), |
| // hours are between 0 and 23, minutes between 0 and 59, and seconds between |
| // 0 and 60 (to allow for leap seconds; no validation is done that a leap |
| // second is on a day that could be a leap second). |
| bool ValidateGeneralizedTime(const GeneralizedTime &time) { |
| if (time.month < 1 || time.month > 12) { |
| return false; |
| } |
| if (time.day < 1) { |
| return false; |
| } |
| if (time.hours > 23) { |
| return false; |
| } |
| if (time.minutes > 59) { |
| return false; |
| } |
| // Leap seconds are allowed. |
| if (time.seconds > 60) { |
| return false; |
| } |
| |
| // validate upper bound for day of month |
| switch (time.month) { |
| case 4: |
| case 6: |
| case 9: |
| case 11: |
| if (time.day > 30) { |
| return false; |
| } |
| break; |
| case 1: |
| case 3: |
| case 5: |
| case 7: |
| case 8: |
| case 10: |
| case 12: |
| if (time.day > 31) { |
| return false; |
| } |
| break; |
| case 2: |
| if (time.year % 4 == 0 && |
| (time.year % 100 != 0 || time.year % 400 == 0)) { |
| if (time.day > 29) { |
| return false; |
| } |
| } else { |
| if (time.day > 28) { |
| return false; |
| } |
| } |
| break; |
| default: |
| abort(); |
| } |
| return true; |
| } |
| |
| // Returns the number of bytes of numeric precision in a DER encoded INTEGER |
| // value. |in| must be a valid DER encoding of an INTEGER for this to work. |
| // |
| // Normally the precision of the number is exactly in.Length(). However when |
| // encoding positive numbers using DER it is possible to have a leading zero |
| // (to prevent number from being interpreted as negative). |
| // |
| // For instance a 160-bit positive number might take 21 bytes to encode. This |
| // function will return 20 in such a case. |
| size_t GetUnsignedIntegerLength(const Input &in) { |
| der::ByteReader reader(in); |
| uint8_t first_byte; |
| if (!reader.ReadByte(&first_byte)) { |
| return 0; // Not valid DER as |in| was empty. |
| } |
| |
| if (first_byte == 0 && in.Length() > 1) { |
| return in.Length() - 1; |
| } |
| return in.Length(); |
| } |
| |
| } // namespace |
| |
| bool ParseBool(const Input &in, bool *out) { |
| return ParseBoolInternal(in, out, false /* relaxed */); |
| } |
| |
| // BER interprets any non-zero value as true, while DER requires a bool to |
| // have either all bits zero (false) or all bits one (true). To support |
| // malformed certs, we recognized the BER encoding instead of failing to |
| // parse. |
| bool ParseBoolRelaxed(const Input &in, bool *out) { |
| return ParseBoolInternal(in, out, true /* relaxed */); |
| } |
| |
| // ITU-T X.690 section 8.3.2 specifies that an integer value must be encoded |
| // in the smallest number of octets. If the encoding consists of more than |
| // one octet, then the bits of the first octet and the most significant bit |
| // of the second octet must not be all zeroes or all ones. |
| bool IsValidInteger(const Input &in, bool *negative) { |
| CBS cbs; |
| CBS_init(&cbs, in.UnsafeData(), in.Length()); |
| int negative_int; |
| if (!CBS_is_valid_asn1_integer(&cbs, &negative_int)) { |
| return false; |
| } |
| |
| *negative = !!negative_int; |
| return true; |
| } |
| |
| bool ParseUint64(const Input &in, uint64_t *out) { |
| // Reject non-minimally encoded numbers and negative numbers. |
| bool negative; |
| if (!IsValidInteger(in, &negative) || negative) { |
| return false; |
| } |
| |
| // Reject (non-negative) integers whose value would overflow the output type. |
| if (GetUnsignedIntegerLength(in) > sizeof(*out)) { |
| return false; |
| } |
| |
| ByteReader reader(in); |
| uint8_t data; |
| uint64_t value = 0; |
| |
| while (reader.ReadByte(&data)) { |
| value <<= 8; |
| value |= data; |
| } |
| *out = value; |
| return true; |
| } |
| |
| bool ParseUint8(const Input &in, uint8_t *out) { |
| // TODO(eroman): Implement this more directly. |
| uint64_t value; |
| if (!ParseUint64(in, &value)) { |
| return false; |
| } |
| |
| if (value > 0xFF) { |
| return false; |
| } |
| |
| *out = static_cast<uint8_t>(value); |
| return true; |
| } |
| |
| BitString::BitString(const Input &bytes, uint8_t unused_bits) |
| : bytes_(bytes), unused_bits_(unused_bits) { |
| BSSL_CHECK(unused_bits < 8); |
| BSSL_CHECK(unused_bits == 0 || bytes.Length() != 0); |
| // The unused bits must be zero. |
| BSSL_CHECK(bytes.Length() == 0 || |
| (bytes[bytes.Length() - 1] & ((1u << unused_bits) - 1)) == 0); |
| } |
| |
| bool BitString::AssertsBit(size_t bit_index) const { |
| // Index of the byte that contains the bit. |
| size_t byte_index = bit_index / 8; |
| |
| // If the bit is outside of the bitstring, by definition it is not |
| // asserted. |
| if (byte_index >= bytes_.Length()) { |
| return false; |
| } |
| |
| // Within a byte, bits are ordered from most significant to least significant. |
| // Convert |bit_index| to an index within the |byte_index| byte, measured from |
| // its least significant bit. |
| uint8_t bit_index_in_byte = 7 - (bit_index - byte_index * 8); |
| |
| // BIT STRING parsing already guarantees that unused bits in a byte are zero |
| // (otherwise it wouldn't be valid DER). Therefore it isn't necessary to check |
| // |unused_bits_| |
| uint8_t byte = bytes_[byte_index]; |
| return 0 != (byte & (1 << bit_index_in_byte)); |
| } |
| |
| std::optional<BitString> ParseBitString(const Input &in) { |
| ByteReader reader(in); |
| |
| // From ITU-T X.690, section 8.6.2.2 (applies to BER, CER, DER): |
| // |
| // The initial octet shall encode, as an unsigned binary integer with |
| // bit 1 as the least significant bit, the number of unused bits in the final |
| // subsequent octet. The number shall be in the range zero to seven. |
| uint8_t unused_bits; |
| if (!reader.ReadByte(&unused_bits)) { |
| return std::nullopt; |
| } |
| if (unused_bits > 7) { |
| return std::nullopt; |
| } |
| |
| Input bytes; |
| if (!reader.ReadBytes(reader.BytesLeft(), &bytes)) { |
| return std::nullopt; // Not reachable. |
| } |
| |
| // Ensure that unused bits in the last byte are set to 0. |
| if (unused_bits > 0) { |
| // From ITU-T X.690, section 8.6.2.3 (applies to BER, CER, DER): |
| // |
| // If the bitstring is empty, there shall be no subsequent octets, |
| // and the initial octet shall be zero. |
| if (bytes.Length() == 0) { |
| return std::nullopt; |
| } |
| uint8_t last_byte = bytes[bytes.Length() - 1]; |
| |
| // From ITU-T X.690, section 11.2.1 (applies to CER and DER, but not BER): |
| // |
| // Each unused bit in the final octet of the encoding of a bit string value |
| // shall be set to zero. |
| uint8_t mask = 0xFF >> (8 - unused_bits); |
| if ((mask & last_byte) != 0) { |
| return std::nullopt; |
| } |
| } |
| |
| return BitString(bytes, unused_bits); |
| } |
| |
| bool GeneralizedTime::InUTCTimeRange() const { |
| return 1950 <= year && year < 2050; |
| } |
| |
| bool operator<(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { |
| return std::tie(lhs.year, lhs.month, lhs.day, lhs.hours, lhs.minutes, |
| lhs.seconds) < std::tie(rhs.year, rhs.month, rhs.day, |
| rhs.hours, rhs.minutes, rhs.seconds); |
| } |
| |
| bool operator>(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { |
| return rhs < lhs; |
| } |
| |
| bool operator<=(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { |
| return !(lhs > rhs); |
| } |
| |
| bool operator>=(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { |
| return !(lhs < rhs); |
| } |
| |
| bool ParseUTCTime(const Input &in, GeneralizedTime *value) { |
| ByteReader reader(in); |
| GeneralizedTime time; |
| if (!DecimalStringToUint(reader, 2, &time.year) || |
| !DecimalStringToUint(reader, 2, &time.month) || |
| !DecimalStringToUint(reader, 2, &time.day) || |
| !DecimalStringToUint(reader, 2, &time.hours) || |
| !DecimalStringToUint(reader, 2, &time.minutes) || |
| !DecimalStringToUint(reader, 2, &time.seconds)) { |
| return false; |
| } |
| uint8_t zulu; |
| if (!reader.ReadByte(&zulu) || zulu != 'Z' || reader.HasMore()) { |
| return false; |
| } |
| if (time.year < 50) { |
| time.year += 2000; |
| } else { |
| time.year += 1900; |
| } |
| if (!ValidateGeneralizedTime(time)) { |
| return false; |
| } |
| *value = time; |
| return true; |
| } |
| |
| bool ParseGeneralizedTime(const Input &in, GeneralizedTime *value) { |
| ByteReader reader(in); |
| GeneralizedTime time; |
| if (!DecimalStringToUint(reader, 4, &time.year) || |
| !DecimalStringToUint(reader, 2, &time.month) || |
| !DecimalStringToUint(reader, 2, &time.day) || |
| !DecimalStringToUint(reader, 2, &time.hours) || |
| !DecimalStringToUint(reader, 2, &time.minutes) || |
| !DecimalStringToUint(reader, 2, &time.seconds)) { |
| return false; |
| } |
| uint8_t zulu; |
| if (!reader.ReadByte(&zulu) || zulu != 'Z' || reader.HasMore()) { |
| return false; |
| } |
| if (!ValidateGeneralizedTime(time)) { |
| return false; |
| } |
| *value = time; |
| return true; |
| } |
| |
| bool ParseIA5String(Input in, std::string *out) { |
| for (char c : in.AsStringView()) { |
| if (static_cast<uint8_t>(c) > 127) { |
| return false; |
| } |
| } |
| *out = in.AsString(); |
| return true; |
| } |
| |
| bool ParseVisibleString(Input in, std::string *out) { |
| // ITU-T X.680: |
| // VisibleString : "Defining registration number 6" + SPACE |
| // 6 includes all the characters from '!' .. '~' (33 .. 126), space is 32. |
| // Also ITU-T X.691 says it much more clearly: |
| // "for VisibleString [the range] is 32 to 126 ... For VisibleString .. all |
| // the values in the range are present." |
| for (char c : in.AsStringView()) { |
| if (static_cast<uint8_t>(c) < 32 || static_cast<uint8_t>(c) > 126) { |
| return false; |
| } |
| } |
| *out = in.AsString(); |
| return true; |
| } |
| |
| bool ParsePrintableString(Input in, std::string *out) { |
| for (char c : in.AsStringView()) { |
| if (!(OPENSSL_isalpha(c) || c == ' ' || (c >= '\'' && c <= ':') || |
| c == '=' || c == '?')) { |
| return false; |
| } |
| } |
| *out = in.AsString(); |
| return true; |
| } |
| |
| bool ParseTeletexStringAsLatin1(Input in, std::string *out) { |
| out->clear(); |
| // Convert from Latin-1 to UTF-8. |
| size_t utf8_length = in.Length(); |
| for (size_t i = 0; i < in.Length(); i++) { |
| if (in[i] > 0x7f) { |
| utf8_length++; |
| } |
| } |
| out->reserve(utf8_length); |
| for (size_t i = 0; i < in.Length(); i++) { |
| uint8_t u = in[i]; |
| if (u <= 0x7f) { |
| out->push_back(u); |
| } else { |
| out->push_back(0xc0 | (u >> 6)); |
| out->push_back(0x80 | (u & 0x3f)); |
| } |
| } |
| BSSL_CHECK(utf8_length == out->size()); |
| return true; |
| } |
| |
| bool ParseUniversalString(Input in, std::string *out) { |
| if (in.Length() % 4 != 0) { |
| return false; |
| } |
| |
| CBS cbs; |
| CBS_init(&cbs, in.UnsafeData(), in.Length()); |
| bssl::ScopedCBB cbb; |
| if (!CBB_init(cbb.get(), in.Length())) { |
| return false; |
| } |
| |
| while (CBS_len(&cbs) != 0) { |
| uint32_t c; |
| if (!CBS_get_utf32_be(&cbs, &c) || // |
| !CBB_add_utf8(cbb.get(), c)) { |
| return false; |
| } |
| } |
| |
| out->assign(CBB_data(cbb.get()), CBB_data(cbb.get()) + CBB_len(cbb.get())); |
| return true; |
| } |
| |
| bool ParseBmpString(Input in, std::string *out) { |
| if (in.Length() % 2 != 0) { |
| return false; |
| } |
| |
| CBS cbs; |
| CBS_init(&cbs, in.UnsafeData(), in.Length()); |
| bssl::ScopedCBB cbb; |
| if (!CBB_init(cbb.get(), in.Length())) { |
| return false; |
| } |
| |
| while (CBS_len(&cbs) != 0) { |
| uint32_t c; |
| if (!CBS_get_ucs2_be(&cbs, &c) || // |
| !CBB_add_utf8(cbb.get(), c)) { |
| return false; |
| } |
| } |
| |
| out->assign(CBB_data(cbb.get()), CBB_data(cbb.get()) + CBB_len(cbb.get())); |
| return true; |
| } |
| |
| } // namespace bssl::der |