| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). */ |
| |
| #ifndef OPENSSL_HEADER_CRYPTO_INTERNAL_H |
| #define OPENSSL_HEADER_CRYPTO_INTERNAL_H |
| |
| #include <openssl/arm_arch.h> |
| #include <openssl/crypto.h> |
| #include <openssl/ex_data.h> |
| #include <openssl/stack.h> |
| #include <openssl/thread.h> |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #if defined(BORINGSSL_CONSTANT_TIME_VALIDATION) |
| #include <valgrind/memcheck.h> |
| #endif |
| |
| #if defined(BORINGSSL_FIPS_BREAK_TESTS) |
| #include <stdlib.h> |
| #endif |
| |
| #if !defined(__cplusplus) |
| #if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 201112L |
| #include <stdalign.h> |
| #elif defined(_MSC_VER) && !defined(__clang__) |
| #define alignas(x) __declspec(align(x)) |
| #define alignof __alignof |
| #else |
| // With the exception of MSVC, we require C11 to build the library. C11 is a |
| // prerequisite for improved refcounting performance. All our supported C |
| // compilers have long implemented C11 and made it default. The most likely |
| // cause of pre-C11 modes is stale -std=c99 or -std=gnu99 flags in build |
| // configuration. Such flags can be removed. |
| // |
| // TODO(davidben): In MSVC 2019 16.8 or higher (_MSC_VER >= 1928), |
| // |__STDC_VERSION__| will be 201112 when passed /std:c11 and unset otherwise. |
| // C11 alignas and alignof are only implemented in C11 mode. Can we mandate C11 |
| // mode for those versions? |
| #error "BoringSSL must be built in C11 mode or higher." |
| #endif |
| #endif |
| |
| #if defined(OPENSSL_THREADS) && \ |
| (!defined(OPENSSL_WINDOWS) || defined(__MINGW32__)) |
| #include <pthread.h> |
| #define OPENSSL_PTHREADS |
| #endif |
| |
| #if defined(OPENSSL_THREADS) && !defined(OPENSSL_PTHREADS) && \ |
| defined(OPENSSL_WINDOWS) |
| #define OPENSSL_WINDOWS_THREADS |
| #endif |
| |
| // Determine the atomics implementation to use with C. |
| #if !defined(__cplusplus) |
| #if !defined(OPENSSL_C11_ATOMIC) && defined(OPENSSL_THREADS) && \ |
| !defined(__STDC_NO_ATOMICS__) && defined(__STDC_VERSION__) && \ |
| __STDC_VERSION__ >= 201112L |
| #define OPENSSL_C11_ATOMIC |
| #endif |
| |
| #if defined(OPENSSL_C11_ATOMIC) |
| #include <stdatomic.h> |
| #endif |
| |
| // Older MSVC does not support C11 atomics, so we fallback to the Windows APIs. |
| // When both are available (e.g. clang-cl), we prefer the C11 ones. The Windows |
| // APIs don't allow some operations to be implemented as efficiently. This can |
| // be removed once we can rely on |
| // https://devblogs.microsoft.com/cppblog/c11-atomics-in-visual-studio-2022-version-17-5-preview-2/ |
| #if !defined(OPENSSL_C11_ATOMIC) && defined(OPENSSL_THREADS) && \ |
| defined(OPENSSL_WINDOWS) |
| #define OPENSSL_WINDOWS_ATOMIC |
| #endif |
| #endif // !__cplusplus |
| |
| #if defined(OPENSSL_WINDOWS_THREADS) || defined(OPENSSL_WINDOWS_ATOMIC) |
| OPENSSL_MSVC_PRAGMA(warning(push, 3)) |
| #include <windows.h> |
| OPENSSL_MSVC_PRAGMA(warning(pop)) |
| #endif |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| |
| #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) || defined(OPENSSL_ARM) || \ |
| defined(OPENSSL_AARCH64) |
| // OPENSSL_cpuid_setup initializes the platform-specific feature cache. |
| void OPENSSL_cpuid_setup(void); |
| #endif |
| |
| #if (defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)) && \ |
| !defined(OPENSSL_STATIC_ARMCAP) |
| // OPENSSL_get_armcap_pointer_for_test returns a pointer to |OPENSSL_armcap_P| |
| // for unit tests. Any modifications to the value must be made after |
| // |CRYPTO_library_init| but before any other function call in BoringSSL. |
| OPENSSL_EXPORT uint32_t *OPENSSL_get_armcap_pointer_for_test(void); |
| #endif |
| |
| |
| // On non-MSVC 64-bit targets, we expect __uint128_t support. This includes |
| // clang-cl, which defines both __clang__ and _MSC_VER. |
| #if (!defined(_MSC_VER) || defined(__clang__)) && defined(OPENSSL_64_BIT) |
| #define BORINGSSL_HAS_UINT128 |
| typedef __int128_t int128_t; |
| typedef __uint128_t uint128_t; |
| |
| // __uint128_t division depends on intrinsics in the compiler runtime. Those |
| // intrinsics are missing in clang-cl (https://crbug.com/787617) and nanolibc. |
| // These may be bugs in the toolchain definition, but just disable it for now. |
| #if !defined(_MSC_VER) && !defined(OPENSSL_NANOLIBC) |
| #define BORINGSSL_CAN_DIVIDE_UINT128 |
| #endif |
| #endif |
| |
| #define OPENSSL_ARRAY_SIZE(array) (sizeof(array) / sizeof((array)[0])) |
| |
| // Have a generic fall-through for different versions of C/C++. |
| #if defined(__cplusplus) && __cplusplus >= 201703L |
| #define OPENSSL_FALLTHROUGH [[fallthrough]] |
| #elif defined(__cplusplus) && __cplusplus >= 201103L && defined(__clang__) |
| #define OPENSSL_FALLTHROUGH [[clang::fallthrough]] |
| #elif defined(__cplusplus) && __cplusplus >= 201103L && defined(__GNUC__) && \ |
| __GNUC__ >= 7 |
| #define OPENSSL_FALLTHROUGH [[gnu::fallthrough]] |
| #elif defined(__GNUC__) && __GNUC__ >= 7 // gcc 7 |
| #define OPENSSL_FALLTHROUGH __attribute__ ((fallthrough)) |
| #elif defined(__clang__) |
| #if __has_attribute(fallthrough) && __clang_major__ >= 5 |
| // Clang 3.5, at least, complains about "error: declaration does not declare |
| // anything", possibily because we put a semicolon after this macro in |
| // practice. Thus limit it to >= Clang 5, which does work. |
| #define OPENSSL_FALLTHROUGH __attribute__ ((fallthrough)) |
| #else // clang versions that do not support fallthrough. |
| #define OPENSSL_FALLTHROUGH |
| #endif |
| #else // C++11 on gcc 6, and all other cases |
| #define OPENSSL_FALLTHROUGH |
| #endif |
| |
| // For convenience in testing 64-bit generic code, we allow disabling SSE2 |
| // intrinsics via |OPENSSL_NO_SSE2_FOR_TESTING|. x86_64 always has SSE2 |
| // available, so we would otherwise need to test such code on a non-x86_64 |
| // platform. |
| #if defined(__SSE2__) && !defined(OPENSSL_NO_SSE2_FOR_TESTING) |
| #define OPENSSL_SSE2 |
| #endif |
| |
| #if defined(__GNUC__) || defined(__clang__) |
| #define OPENSSL_ATTR_PURE __attribute__((pure)) |
| #else |
| #define OPENSSL_ATTR_PURE |
| #endif |
| |
| #if defined(BORINGSSL_MALLOC_FAILURE_TESTING) |
| // OPENSSL_reset_malloc_counter_for_testing, when malloc testing is enabled, |
| // resets the internal malloc counter, to simulate further malloc failures. This |
| // should be called in between independent tests, at a point where failure from |
| // a previous test will not impact subsequent ones. |
| OPENSSL_EXPORT void OPENSSL_reset_malloc_counter_for_testing(void); |
| #else |
| OPENSSL_INLINE void OPENSSL_reset_malloc_counter_for_testing(void) {} |
| #endif |
| |
| |
| // Pointer utility functions. |
| |
| // buffers_alias returns one if |a| and |b| alias and zero otherwise. |
| static inline int buffers_alias(const void *a, size_t a_bytes, |
| const void *b, size_t b_bytes) { |
| // Cast |a| and |b| to integers. In C, pointer comparisons between unrelated |
| // objects are undefined whereas pointer to integer conversions are merely |
| // implementation-defined. We assume the implementation defined it in a sane |
| // way. |
| uintptr_t a_u = (uintptr_t)a; |
| uintptr_t b_u = (uintptr_t)b; |
| return a_u + a_bytes > b_u && b_u + b_bytes > a_u; |
| } |
| |
| // align_pointer returns |ptr|, advanced to |alignment|. |alignment| must be a |
| // power of two, and |ptr| must have at least |alignment - 1| bytes of scratch |
| // space. |
| static inline void *align_pointer(void *ptr, size_t alignment) { |
| // |alignment| must be a power of two. |
| assert(alignment != 0 && (alignment & (alignment - 1)) == 0); |
| // Instead of aligning |ptr| as a |uintptr_t| and casting back, compute the |
| // offset and advance in pointer space. C guarantees that casting from pointer |
| // to |uintptr_t| and back gives the same pointer, but general |
| // integer-to-pointer conversions are implementation-defined. GCC does define |
| // it in the useful way, but this makes fewer assumptions. |
| uintptr_t offset = (0u - (uintptr_t)ptr) & (alignment - 1); |
| ptr = (char *)ptr + offset; |
| assert(((uintptr_t)ptr & (alignment - 1)) == 0); |
| return ptr; |
| } |
| |
| |
| // Constant-time utility functions. |
| // |
| // The following methods return a bitmask of all ones (0xff...f) for true and 0 |
| // for false. This is useful for choosing a value based on the result of a |
| // conditional in constant time. For example, |
| // |
| // if (a < b) { |
| // c = a; |
| // } else { |
| // c = b; |
| // } |
| // |
| // can be written as |
| // |
| // crypto_word_t lt = constant_time_lt_w(a, b); |
| // c = constant_time_select_w(lt, a, b); |
| |
| // crypto_word_t is the type that most constant-time functions use. Ideally we |
| // would like it to be |size_t|, but NaCl builds in 64-bit mode with 32-bit |
| // pointers, which means that |size_t| can be 32 bits when |BN_ULONG| is 64 |
| // bits. Since we want to be able to do constant-time operations on a |
| // |BN_ULONG|, |crypto_word_t| is defined as an unsigned value with the native |
| // word length. |
| #if defined(OPENSSL_64_BIT) |
| typedef uint64_t crypto_word_t; |
| #elif defined(OPENSSL_32_BIT) |
| typedef uint32_t crypto_word_t; |
| #else |
| #error "Must define either OPENSSL_32_BIT or OPENSSL_64_BIT" |
| #endif |
| |
| #define CONSTTIME_TRUE_W ~((crypto_word_t)0) |
| #define CONSTTIME_FALSE_W ((crypto_word_t)0) |
| #define CONSTTIME_TRUE_8 ((uint8_t)0xff) |
| #define CONSTTIME_FALSE_8 ((uint8_t)0) |
| |
| // value_barrier_w returns |a|, but prevents GCC and Clang from reasoning about |
| // the returned value. This is used to mitigate compilers undoing constant-time |
| // code, until we can express our requirements directly in the language. |
| // |
| // Note the compiler is aware that |value_barrier_w| has no side effects and |
| // always has the same output for a given input. This allows it to eliminate |
| // dead code, move computations across loops, and vectorize. |
| static inline crypto_word_t value_barrier_w(crypto_word_t a) { |
| #if defined(__GNUC__) || defined(__clang__) |
| __asm__("" : "+r"(a) : /* no inputs */); |
| #endif |
| return a; |
| } |
| |
| // value_barrier_u32 behaves like |value_barrier_w| but takes a |uint32_t|. |
| static inline uint32_t value_barrier_u32(uint32_t a) { |
| #if defined(__GNUC__) || defined(__clang__) |
| __asm__("" : "+r"(a) : /* no inputs */); |
| #endif |
| return a; |
| } |
| |
| // value_barrier_u64 behaves like |value_barrier_w| but takes a |uint64_t|. |
| static inline uint64_t value_barrier_u64(uint64_t a) { |
| #if defined(__GNUC__) || defined(__clang__) |
| __asm__("" : "+r"(a) : /* no inputs */); |
| #endif |
| return a; |
| } |
| |
| // |value_barrier_u8| could be defined as above, but compilers other than |
| // clang seem to still materialize 0x00..00MM instead of reusing 0x??..??MM. |
| |
| // constant_time_msb_w returns the given value with the MSB copied to all the |
| // other bits. |
| static inline crypto_word_t constant_time_msb_w(crypto_word_t a) { |
| return 0u - (a >> (sizeof(a) * 8 - 1)); |
| } |
| |
| // constant_time_lt_w returns 0xff..f if a < b and 0 otherwise. |
| static inline crypto_word_t constant_time_lt_w(crypto_word_t a, |
| crypto_word_t b) { |
| // Consider the two cases of the problem: |
| // msb(a) == msb(b): a < b iff the MSB of a - b is set. |
| // msb(a) != msb(b): a < b iff the MSB of b is set. |
| // |
| // If msb(a) == msb(b) then the following evaluates as: |
| // msb(a^((a^b)|((a-b)^a))) == |
| // msb(a^((a-b) ^ a)) == (because msb(a^b) == 0) |
| // msb(a^a^(a-b)) == (rearranging) |
| // msb(a-b) (because ∀x. x^x == 0) |
| // |
| // Else, if msb(a) != msb(b) then the following evaluates as: |
| // msb(a^((a^b)|((a-b)^a))) == |
| // msb(a^(𝟙 | ((a-b)^a))) == (because msb(a^b) == 1 and 𝟙 |
| // represents a value s.t. msb(𝟙) = 1) |
| // msb(a^𝟙) == (because ORing with 1 results in 1) |
| // msb(b) |
| // |
| // |
| // Here is an SMT-LIB verification of this formula: |
| // |
| // (define-fun lt ((a (_ BitVec 32)) (b (_ BitVec 32))) (_ BitVec 32) |
| // (bvxor a (bvor (bvxor a b) (bvxor (bvsub a b) a))) |
| // ) |
| // |
| // (declare-fun a () (_ BitVec 32)) |
| // (declare-fun b () (_ BitVec 32)) |
| // |
| // (assert (not (= (= #x00000001 (bvlshr (lt a b) #x0000001f)) (bvult a b)))) |
| // (check-sat) |
| // (get-model) |
| return constant_time_msb_w(a^((a^b)|((a-b)^a))); |
| } |
| |
| // constant_time_lt_8 acts like |constant_time_lt_w| but returns an 8-bit |
| // mask. |
| static inline uint8_t constant_time_lt_8(crypto_word_t a, crypto_word_t b) { |
| return (uint8_t)(constant_time_lt_w(a, b)); |
| } |
| |
| // constant_time_ge_w returns 0xff..f if a >= b and 0 otherwise. |
| static inline crypto_word_t constant_time_ge_w(crypto_word_t a, |
| crypto_word_t b) { |
| return ~constant_time_lt_w(a, b); |
| } |
| |
| // constant_time_ge_8 acts like |constant_time_ge_w| but returns an 8-bit |
| // mask. |
| static inline uint8_t constant_time_ge_8(crypto_word_t a, crypto_word_t b) { |
| return (uint8_t)(constant_time_ge_w(a, b)); |
| } |
| |
| // constant_time_is_zero returns 0xff..f if a == 0 and 0 otherwise. |
| static inline crypto_word_t constant_time_is_zero_w(crypto_word_t a) { |
| // Here is an SMT-LIB verification of this formula: |
| // |
| // (define-fun is_zero ((a (_ BitVec 32))) (_ BitVec 32) |
| // (bvand (bvnot a) (bvsub a #x00000001)) |
| // ) |
| // |
| // (declare-fun a () (_ BitVec 32)) |
| // |
| // (assert (not (= (= #x00000001 (bvlshr (is_zero a) #x0000001f)) (= a #x00000000)))) |
| // (check-sat) |
| // (get-model) |
| return constant_time_msb_w(~a & (a - 1)); |
| } |
| |
| // constant_time_is_zero_8 acts like |constant_time_is_zero_w| but returns an |
| // 8-bit mask. |
| static inline uint8_t constant_time_is_zero_8(crypto_word_t a) { |
| return (uint8_t)(constant_time_is_zero_w(a)); |
| } |
| |
| // constant_time_eq_w returns 0xff..f if a == b and 0 otherwise. |
| static inline crypto_word_t constant_time_eq_w(crypto_word_t a, |
| crypto_word_t b) { |
| return constant_time_is_zero_w(a ^ b); |
| } |
| |
| // constant_time_eq_8 acts like |constant_time_eq_w| but returns an 8-bit |
| // mask. |
| static inline uint8_t constant_time_eq_8(crypto_word_t a, crypto_word_t b) { |
| return (uint8_t)(constant_time_eq_w(a, b)); |
| } |
| |
| // constant_time_eq_int acts like |constant_time_eq_w| but works on int |
| // values. |
| static inline crypto_word_t constant_time_eq_int(int a, int b) { |
| return constant_time_eq_w((crypto_word_t)(a), (crypto_word_t)(b)); |
| } |
| |
| // constant_time_eq_int_8 acts like |constant_time_eq_int| but returns an 8-bit |
| // mask. |
| static inline uint8_t constant_time_eq_int_8(int a, int b) { |
| return constant_time_eq_8((crypto_word_t)(a), (crypto_word_t)(b)); |
| } |
| |
| // constant_time_select_w returns (mask & a) | (~mask & b). When |mask| is all |
| // 1s or all 0s (as returned by the methods above), the select methods return |
| // either |a| (if |mask| is nonzero) or |b| (if |mask| is zero). |
| static inline crypto_word_t constant_time_select_w(crypto_word_t mask, |
| crypto_word_t a, |
| crypto_word_t b) { |
| // Clang recognizes this pattern as a select. While it usually transforms it |
| // to a cmov, it sometimes further transforms it into a branch, which we do |
| // not want. |
| // |
| // Hiding the value of the mask from the compiler evades this transformation. |
| mask = value_barrier_w(mask); |
| return (mask & a) | (~mask & b); |
| } |
| |
| // constant_time_select_8 acts like |constant_time_select| but operates on |
| // 8-bit values. |
| static inline uint8_t constant_time_select_8(crypto_word_t mask, uint8_t a, |
| uint8_t b) { |
| // |mask| is a word instead of |uint8_t| to avoid materializing 0x000..0MM |
| // Making both |mask| and its value barrier |uint8_t| would allow the compiler |
| // to materialize 0x????..?MM instead, but only clang is that clever. |
| // However, vectorization of bitwise operations seems to work better on |
| // |uint8_t| than a mix of |uint64_t| and |uint8_t|, so |m| is cast to |
| // |uint8_t| after the value barrier but before the bitwise operations. |
| uint8_t m = value_barrier_w(mask); |
| return (m & a) | (~m & b); |
| } |
| |
| // constant_time_select_int acts like |constant_time_select| but operates on |
| // ints. |
| static inline int constant_time_select_int(crypto_word_t mask, int a, int b) { |
| return (int)(constant_time_select_w(mask, (crypto_word_t)(a), |
| (crypto_word_t)(b))); |
| } |
| |
| // constant_time_conditional_memcpy copies |n| bytes from |src| to |dst| if |
| // |mask| is 0xff..ff and does nothing if |mask| is 0. The |n|-byte memory |
| // ranges at |dst| and |src| must not overlap, as when calling |memcpy|. |
| static inline void constant_time_conditional_memcpy(void *dst, const void *src, |
| const size_t n, |
| const crypto_word_t mask) { |
| assert(!buffers_alias(dst, n, src, n)); |
| uint8_t *out = (uint8_t *)dst; |
| const uint8_t *in = (const uint8_t *)src; |
| for (size_t i = 0; i < n; i++) { |
| out[i] = constant_time_select_8(mask, in[i], out[i]); |
| } |
| } |
| |
| // constant_time_conditional_memxor xors |n| bytes from |src| to |dst| if |
| // |mask| is 0xff..ff and does nothing if |mask| is 0. The |n|-byte memory |
| // ranges at |dst| and |src| must not overlap, as when calling |memcpy|. |
| static inline void constant_time_conditional_memxor(void *dst, const void *src, |
| const size_t n, |
| const crypto_word_t mask) { |
| assert(!buffers_alias(dst, n, src, n)); |
| uint8_t *out = (uint8_t *)dst; |
| const uint8_t *in = (const uint8_t *)src; |
| for (size_t i = 0; i < n; i++) { |
| out[i] ^= value_barrier_w(mask) & in[i]; |
| } |
| } |
| |
| #if defined(BORINGSSL_CONSTANT_TIME_VALIDATION) |
| |
| // CONSTTIME_SECRET takes a pointer and a number of bytes and marks that region |
| // of memory as secret. Secret data is tracked as it flows to registers and |
| // other parts of a memory. If secret data is used as a condition for a branch, |
| // or as a memory index, it will trigger warnings in valgrind. |
| #define CONSTTIME_SECRET(ptr, len) VALGRIND_MAKE_MEM_UNDEFINED(ptr, len) |
| |
| // CONSTTIME_DECLASSIFY takes a pointer and a number of bytes and marks that |
| // region of memory as public. Public data is not subject to constant-time |
| // rules. |
| #define CONSTTIME_DECLASSIFY(ptr, len) VALGRIND_MAKE_MEM_DEFINED(ptr, len) |
| |
| #else |
| |
| #define CONSTTIME_SECRET(ptr, len) |
| #define CONSTTIME_DECLASSIFY(ptr, len) |
| |
| #endif // BORINGSSL_CONSTANT_TIME_VALIDATION |
| |
| static inline crypto_word_t constant_time_declassify_w(crypto_word_t v) { |
| // Return |v| through a value barrier to be safe. Valgrind-based constant-time |
| // validation is partly to check the compiler has not undone any constant-time |
| // work. Any place |BORINGSSL_CONSTANT_TIME_VALIDATION| influences |
| // optimizations, this validation is inaccurate. |
| // |
| // However, by sending pointers through valgrind, we likely inhibit escape |
| // analysis. On local variables, particularly booleans, we likely |
| // significantly impact optimizations. |
| // |
| // Thus, to be safe, stick a value barrier, in hopes of comparably inhibiting |
| // compiler analysis. |
| CONSTTIME_DECLASSIFY(&v, sizeof(v)); |
| return value_barrier_w(v); |
| } |
| |
| static inline int constant_time_declassify_int(int v) { |
| static_assert(sizeof(uint32_t) == sizeof(int), |
| "int is not the same size as uint32_t"); |
| // See comment above. |
| CONSTTIME_DECLASSIFY(&v, sizeof(v)); |
| return value_barrier_u32(v); |
| } |
| |
| |
| // Thread-safe initialisation. |
| |
| #if !defined(OPENSSL_THREADS) |
| typedef uint32_t CRYPTO_once_t; |
| #define CRYPTO_ONCE_INIT 0 |
| #elif defined(OPENSSL_WINDOWS_THREADS) |
| typedef INIT_ONCE CRYPTO_once_t; |
| #define CRYPTO_ONCE_INIT INIT_ONCE_STATIC_INIT |
| #elif defined(OPENSSL_PTHREADS) |
| typedef pthread_once_t CRYPTO_once_t; |
| #define CRYPTO_ONCE_INIT PTHREAD_ONCE_INIT |
| #else |
| #error "Unknown threading library" |
| #endif |
| |
| // CRYPTO_once calls |init| exactly once per process. This is thread-safe: if |
| // concurrent threads call |CRYPTO_once| with the same |CRYPTO_once_t| argument |
| // then they will block until |init| completes, but |init| will have only been |
| // called once. |
| // |
| // The |once| argument must be a |CRYPTO_once_t| that has been initialised with |
| // the value |CRYPTO_ONCE_INIT|. |
| OPENSSL_EXPORT void CRYPTO_once(CRYPTO_once_t *once, void (*init)(void)); |
| |
| |
| // Atomics. |
| // |
| // The following functions provide an API analogous to <stdatomic.h> from C11 |
| // and abstract between a few variations on atomics we need to support. |
| |
| #if defined(__cplusplus) |
| |
| // In C++, we can't easily detect whether C will use |OPENSSL_C11_ATOMIC| or |
| // |OPENSSL_WINDOWS_ATOMIC|. Instead, we define a layout-compatible type without |
| // the corresponding functions. When we can rely on C11 atomics in MSVC, that |
| // will no longer be a concern. |
| typedef uint32_t CRYPTO_atomic_u32; |
| |
| #elif defined(OPENSSL_C11_ATOMIC) |
| |
| typedef _Atomic uint32_t CRYPTO_atomic_u32; |
| |
| // This should be const, but the |OPENSSL_WINDOWS_ATOMIC| implementation is not |
| // const due to Windows limitations. When we can rely on C11 atomics, make this |
| // const-correct. |
| OPENSSL_INLINE uint32_t CRYPTO_atomic_load_u32(CRYPTO_atomic_u32 *val) { |
| return atomic_load(val); |
| } |
| |
| OPENSSL_INLINE int CRYPTO_atomic_compare_exchange_weak_u32( |
| CRYPTO_atomic_u32 *val, uint32_t *expected, uint32_t desired) { |
| return atomic_compare_exchange_weak(val, expected, desired); |
| } |
| |
| OPENSSL_INLINE void CRYPTO_atomic_store_u32(CRYPTO_atomic_u32 *val, |
| uint32_t desired) { |
| atomic_store(val, desired); |
| } |
| |
| #elif defined(OPENSSL_WINDOWS_ATOMIC) |
| |
| typedef LONG CRYPTO_atomic_u32; |
| |
| OPENSSL_INLINE uint32_t CRYPTO_atomic_load_u32(volatile CRYPTO_atomic_u32 *val) { |
| // This is not ideal because it still writes to a cacheline. MSVC is not able |
| // to optimize this to a true atomic read, and Windows does not provide an |
| // InterlockedLoad function. |
| // |
| // The Windows documentation [1] does say "Simple reads and writes to |
| // properly-aligned 32-bit variables are atomic operations", but this is not |
| // phrased in terms of the C11 and C++11 memory models, and indeed a read or |
| // write seems to produce slightly different code on MSVC than a sequentially |
| // consistent std::atomic::load in C++. Moreover, it is unclear if non-MSVC |
| // compilers on Windows provide the same guarantees. Thus we avoid relying on |
| // this and instead still use an interlocked function. This is still |
| // preferable a global mutex, and eventually this code will be replaced by |
| // [2]. Additionally, on clang-cl, we'll use the |OPENSSL_C11_ATOMIC| path. |
| // |
| // [1] https://learn.microsoft.com/en-us/windows/win32/sync/interlocked-variable-access |
| // [2] https://devblogs.microsoft.com/cppblog/c11-atomics-in-visual-studio-2022-version-17-5-preview-2/ |
| return (uint32_t)InterlockedCompareExchange(val, 0, 0); |
| } |
| |
| OPENSSL_INLINE int CRYPTO_atomic_compare_exchange_weak_u32( |
| volatile CRYPTO_atomic_u32 *val, uint32_t *expected32, uint32_t desired) { |
| LONG expected = (LONG)*expected32; |
| LONG actual = InterlockedCompareExchange(val, (LONG)desired, expected); |
| *expected32 = (uint32_t)actual; |
| return actual == expected; |
| } |
| |
| OPENSSL_INLINE void CRYPTO_atomic_store_u32(volatile CRYPTO_atomic_u32 *val, |
| uint32_t desired) { |
| InterlockedExchange(val, (LONG)desired); |
| } |
| |
| #elif !defined(OPENSSL_THREADS) |
| |
| typedef uint32_t CRYPTO_atomic_u32; |
| |
| OPENSSL_INLINE uint32_t CRYPTO_atomic_load_u32(CRYPTO_atomic_u32 *val) { |
| return *val; |
| } |
| |
| OPENSSL_INLINE int CRYPTO_atomic_compare_exchange_weak_u32( |
| CRYPTO_atomic_u32 *val, uint32_t *expected, uint32_t desired) { |
| if (*val != *expected) { |
| *expected = *val; |
| return 0; |
| } |
| *val = desired; |
| return 1; |
| } |
| |
| OPENSSL_INLINE void CRYPTO_atomic_store_u32(CRYPTO_atomic_u32 *val, |
| uint32_t desired) { |
| *val = desired; |
| } |
| |
| #else |
| |
| // Require some atomics implementation. Contact BoringSSL maintainers if you |
| // have a platform with fails this check. |
| #error "Thread-compatible configurations require atomics" |
| |
| #endif |
| |
| // See the comment in the |__cplusplus| section above. |
| static_assert(sizeof(CRYPTO_atomic_u32) == sizeof(uint32_t), |
| "CRYPTO_atomic_u32 does not match uint32_t size"); |
| static_assert(alignof(CRYPTO_atomic_u32) == alignof(uint32_t), |
| "CRYPTO_atomic_u32 does not match uint32_t alignment"); |
| |
| |
| // Reference counting. |
| |
| // CRYPTO_REFCOUNT_MAX is the value at which the reference count saturates. |
| #define CRYPTO_REFCOUNT_MAX 0xffffffff |
| |
| // CRYPTO_refcount_inc atomically increments the value at |*count| unless the |
| // value would overflow. It's safe for multiple threads to concurrently call |
| // this or |CRYPTO_refcount_dec_and_test_zero| on the same |
| // |CRYPTO_refcount_t|. |
| OPENSSL_EXPORT void CRYPTO_refcount_inc(CRYPTO_refcount_t *count); |
| |
| // CRYPTO_refcount_dec_and_test_zero tests the value at |*count|: |
| // if it's zero, it crashes the address space. |
| // if it's the maximum value, it returns zero. |
| // otherwise, it atomically decrements it and returns one iff the resulting |
| // value is zero. |
| // |
| // It's safe for multiple threads to concurrently call this or |
| // |CRYPTO_refcount_inc| on the same |CRYPTO_refcount_t|. |
| OPENSSL_EXPORT int CRYPTO_refcount_dec_and_test_zero(CRYPTO_refcount_t *count); |
| |
| |
| // Locks. |
| |
| #if !defined(OPENSSL_THREADS) |
| typedef struct crypto_mutex_st { |
| char padding; // Empty structs have different sizes in C and C++. |
| } CRYPTO_MUTEX; |
| #define CRYPTO_MUTEX_INIT { 0 } |
| #elif defined(OPENSSL_WINDOWS_THREADS) |
| typedef SRWLOCK CRYPTO_MUTEX; |
| #define CRYPTO_MUTEX_INIT SRWLOCK_INIT |
| #elif defined(OPENSSL_PTHREADS) |
| typedef pthread_rwlock_t CRYPTO_MUTEX; |
| #define CRYPTO_MUTEX_INIT PTHREAD_RWLOCK_INITIALIZER |
| #else |
| #error "Unknown threading library" |
| #endif |
| |
| // CRYPTO_MUTEX_init initialises |lock|. If |lock| is a static variable, use a |
| // |CRYPTO_MUTEX_INIT|. |
| OPENSSL_EXPORT void CRYPTO_MUTEX_init(CRYPTO_MUTEX *lock); |
| |
| // CRYPTO_MUTEX_lock_read locks |lock| such that other threads may also have a |
| // read lock, but none may have a write lock. |
| OPENSSL_EXPORT void CRYPTO_MUTEX_lock_read(CRYPTO_MUTEX *lock); |
| |
| // CRYPTO_MUTEX_lock_write locks |lock| such that no other thread has any type |
| // of lock on it. |
| OPENSSL_EXPORT void CRYPTO_MUTEX_lock_write(CRYPTO_MUTEX *lock); |
| |
| // CRYPTO_MUTEX_unlock_read unlocks |lock| for reading. |
| OPENSSL_EXPORT void CRYPTO_MUTEX_unlock_read(CRYPTO_MUTEX *lock); |
| |
| // CRYPTO_MUTEX_unlock_write unlocks |lock| for writing. |
| OPENSSL_EXPORT void CRYPTO_MUTEX_unlock_write(CRYPTO_MUTEX *lock); |
| |
| // CRYPTO_MUTEX_cleanup releases all resources held by |lock|. |
| OPENSSL_EXPORT void CRYPTO_MUTEX_cleanup(CRYPTO_MUTEX *lock); |
| |
| #if defined(__cplusplus) |
| extern "C++" { |
| |
| BSSL_NAMESPACE_BEGIN |
| |
| namespace internal { |
| |
| // MutexLockBase is a RAII helper for CRYPTO_MUTEX locking. |
| template <void (*LockFunc)(CRYPTO_MUTEX *), void (*ReleaseFunc)(CRYPTO_MUTEX *)> |
| class MutexLockBase { |
| public: |
| explicit MutexLockBase(CRYPTO_MUTEX *mu) : mu_(mu) { |
| assert(mu_ != nullptr); |
| LockFunc(mu_); |
| } |
| ~MutexLockBase() { ReleaseFunc(mu_); } |
| MutexLockBase(const MutexLockBase<LockFunc, ReleaseFunc> &) = delete; |
| MutexLockBase &operator=(const MutexLockBase<LockFunc, ReleaseFunc> &) = |
| delete; |
| |
| private: |
| CRYPTO_MUTEX *const mu_; |
| }; |
| |
| } // namespace internal |
| |
| using MutexWriteLock = |
| internal::MutexLockBase<CRYPTO_MUTEX_lock_write, CRYPTO_MUTEX_unlock_write>; |
| using MutexReadLock = |
| internal::MutexLockBase<CRYPTO_MUTEX_lock_read, CRYPTO_MUTEX_unlock_read>; |
| |
| BSSL_NAMESPACE_END |
| |
| } // extern "C++" |
| #endif // defined(__cplusplus) |
| |
| |
| // Thread local storage. |
| |
| // thread_local_data_t enumerates the types of thread-local data that can be |
| // stored. |
| typedef enum { |
| OPENSSL_THREAD_LOCAL_ERR = 0, |
| OPENSSL_THREAD_LOCAL_RAND, |
| OPENSSL_THREAD_LOCAL_FIPS_COUNTERS, |
| OPENSSL_THREAD_LOCAL_FIPS_SERVICE_INDICATOR_STATE, |
| OPENSSL_THREAD_LOCAL_TEST, |
| NUM_OPENSSL_THREAD_LOCALS, |
| } thread_local_data_t; |
| |
| // thread_local_destructor_t is the type of a destructor function that will be |
| // called when a thread exits and its thread-local storage needs to be freed. |
| typedef void (*thread_local_destructor_t)(void *); |
| |
| // CRYPTO_get_thread_local gets the pointer value that is stored for the |
| // current thread for the given index, or NULL if none has been set. |
| OPENSSL_EXPORT void *CRYPTO_get_thread_local(thread_local_data_t value); |
| |
| // CRYPTO_set_thread_local sets a pointer value for the current thread at the |
| // given index. This function should only be called once per thread for a given |
| // |index|: rather than update the pointer value itself, update the data that |
| // is pointed to. |
| // |
| // The destructor function will be called when a thread exits to free this |
| // thread-local data. All calls to |CRYPTO_set_thread_local| with the same |
| // |index| should have the same |destructor| argument. The destructor may be |
| // called with a NULL argument if a thread that never set a thread-local |
| // pointer for |index|, exits. The destructor may be called concurrently with |
| // different arguments. |
| // |
| // This function returns one on success or zero on error. If it returns zero |
| // then |destructor| has been called with |value| already. |
| OPENSSL_EXPORT int CRYPTO_set_thread_local( |
| thread_local_data_t index, void *value, |
| thread_local_destructor_t destructor); |
| |
| |
| // ex_data |
| |
| typedef struct crypto_ex_data_func_st CRYPTO_EX_DATA_FUNCS; |
| |
| // CRYPTO_EX_DATA_CLASS tracks the ex_indices registered for a type which |
| // supports ex_data. It should defined as a static global within the module |
| // which defines that type. |
| typedef struct { |
| CRYPTO_MUTEX lock; |
| // funcs is a linked list of |CRYPTO_EX_DATA_FUNCS| structures. It may be |
| // traversed without serialization only up to |num_funcs|. last points to the |
| // final entry of |funcs|, or NULL if empty. |
| CRYPTO_EX_DATA_FUNCS *funcs, *last; |
| // num_funcs is the number of entries in |funcs|. |
| CRYPTO_atomic_u32 num_funcs; |
| // num_reserved is one if the ex_data index zero is reserved for legacy |
| // |TYPE_get_app_data| functions. |
| uint8_t num_reserved; |
| } CRYPTO_EX_DATA_CLASS; |
| |
| #define CRYPTO_EX_DATA_CLASS_INIT {CRYPTO_MUTEX_INIT, NULL, NULL, 0, 0} |
| #define CRYPTO_EX_DATA_CLASS_INIT_WITH_APP_DATA \ |
| {CRYPTO_MUTEX_INIT, NULL, NULL, 0, 1} |
| |
| // CRYPTO_get_ex_new_index allocates a new index for |ex_data_class| and writes |
| // it to |*out_index|. Each class of object should provide a wrapper function |
| // that uses the correct |CRYPTO_EX_DATA_CLASS|. It returns one on success and |
| // zero otherwise. |
| OPENSSL_EXPORT int CRYPTO_get_ex_new_index(CRYPTO_EX_DATA_CLASS *ex_data_class, |
| int *out_index, long argl, |
| void *argp, |
| CRYPTO_EX_free *free_func); |
| |
| // CRYPTO_set_ex_data sets an extra data pointer on a given object. Each class |
| // of object should provide a wrapper function. |
| OPENSSL_EXPORT int CRYPTO_set_ex_data(CRYPTO_EX_DATA *ad, int index, void *val); |
| |
| // CRYPTO_get_ex_data returns an extra data pointer for a given object, or NULL |
| // if no such index exists. Each class of object should provide a wrapper |
| // function. |
| OPENSSL_EXPORT void *CRYPTO_get_ex_data(const CRYPTO_EX_DATA *ad, int index); |
| |
| // CRYPTO_new_ex_data initialises a newly allocated |CRYPTO_EX_DATA|. |
| OPENSSL_EXPORT void CRYPTO_new_ex_data(CRYPTO_EX_DATA *ad); |
| |
| // CRYPTO_free_ex_data frees |ad|, which is embedded inside |obj|, which is an |
| // object of the given class. |
| OPENSSL_EXPORT void CRYPTO_free_ex_data(CRYPTO_EX_DATA_CLASS *ex_data_class, |
| void *obj, CRYPTO_EX_DATA *ad); |
| |
| |
| // Endianness conversions. |
| |
| #if defined(__GNUC__) && __GNUC__ >= 2 |
| static inline uint16_t CRYPTO_bswap2(uint16_t x) { |
| return __builtin_bswap16(x); |
| } |
| |
| static inline uint32_t CRYPTO_bswap4(uint32_t x) { |
| return __builtin_bswap32(x); |
| } |
| |
| static inline uint64_t CRYPTO_bswap8(uint64_t x) { |
| return __builtin_bswap64(x); |
| } |
| #elif defined(_MSC_VER) |
| OPENSSL_MSVC_PRAGMA(warning(push, 3)) |
| #include <stdlib.h> |
| OPENSSL_MSVC_PRAGMA(warning(pop)) |
| #pragma intrinsic(_byteswap_uint64, _byteswap_ulong, _byteswap_ushort) |
| static inline uint16_t CRYPTO_bswap2(uint16_t x) { |
| return _byteswap_ushort(x); |
| } |
| |
| static inline uint32_t CRYPTO_bswap4(uint32_t x) { |
| return _byteswap_ulong(x); |
| } |
| |
| static inline uint64_t CRYPTO_bswap8(uint64_t x) { |
| return _byteswap_uint64(x); |
| } |
| #else |
| static inline uint16_t CRYPTO_bswap2(uint16_t x) { |
| return (x >> 8) | (x << 8); |
| } |
| |
| static inline uint32_t CRYPTO_bswap4(uint32_t x) { |
| x = (x >> 16) | (x << 16); |
| x = ((x & 0xff00ff00) >> 8) | ((x & 0x00ff00ff) << 8); |
| return x; |
| } |
| |
| static inline uint64_t CRYPTO_bswap8(uint64_t x) { |
| return CRYPTO_bswap4(x >> 32) | (((uint64_t)CRYPTO_bswap4(x)) << 32); |
| } |
| #endif |
| |
| |
| // Language bug workarounds. |
| // |
| // Most C standard library functions are undefined if passed NULL, even when the |
| // corresponding length is zero. This gives them (and, in turn, all functions |
| // which call them) surprising behavior on empty arrays. Some compilers will |
| // miscompile code due to this rule. See also |
| // https://www.imperialviolet.org/2016/06/26/nonnull.html |
| // |
| // These wrapper functions behave the same as the corresponding C standard |
| // functions, but behave as expected when passed NULL if the length is zero. |
| // |
| // Note |OPENSSL_memcmp| is a different function from |CRYPTO_memcmp|. |
| |
| // C++ defines |memchr| as a const-correct overload. |
| #if defined(__cplusplus) |
| extern "C++" { |
| |
| static inline const void *OPENSSL_memchr(const void *s, int c, size_t n) { |
| if (n == 0) { |
| return NULL; |
| } |
| |
| return memchr(s, c, n); |
| } |
| |
| static inline void *OPENSSL_memchr(void *s, int c, size_t n) { |
| if (n == 0) { |
| return NULL; |
| } |
| |
| return memchr(s, c, n); |
| } |
| |
| } // extern "C++" |
| #else // __cplusplus |
| |
| static inline void *OPENSSL_memchr(const void *s, int c, size_t n) { |
| if (n == 0) { |
| return NULL; |
| } |
| |
| return memchr(s, c, n); |
| } |
| |
| #endif // __cplusplus |
| |
| static inline int OPENSSL_memcmp(const void *s1, const void *s2, size_t n) { |
| if (n == 0) { |
| return 0; |
| } |
| |
| return memcmp(s1, s2, n); |
| } |
| |
| static inline void *OPENSSL_memcpy(void *dst, const void *src, size_t n) { |
| if (n == 0) { |
| return dst; |
| } |
| |
| return memcpy(dst, src, n); |
| } |
| |
| static inline void *OPENSSL_memmove(void *dst, const void *src, size_t n) { |
| if (n == 0) { |
| return dst; |
| } |
| |
| return memmove(dst, src, n); |
| } |
| |
| static inline void *OPENSSL_memset(void *dst, int c, size_t n) { |
| if (n == 0) { |
| return dst; |
| } |
| |
| return memset(dst, c, n); |
| } |
| |
| |
| // Loads and stores. |
| // |
| // The following functions load and store sized integers with the specified |
| // endianness. They use |memcpy|, and so avoid alignment or strict aliasing |
| // requirements on the input and output pointers. |
| |
| static inline uint32_t CRYPTO_load_u32_le(const void *in) { |
| uint32_t v; |
| OPENSSL_memcpy(&v, in, sizeof(v)); |
| return v; |
| } |
| |
| static inline void CRYPTO_store_u32_le(void *out, uint32_t v) { |
| OPENSSL_memcpy(out, &v, sizeof(v)); |
| } |
| |
| static inline uint32_t CRYPTO_load_u32_be(const void *in) { |
| uint32_t v; |
| OPENSSL_memcpy(&v, in, sizeof(v)); |
| return CRYPTO_bswap4(v); |
| } |
| |
| static inline void CRYPTO_store_u32_be(void *out, uint32_t v) { |
| v = CRYPTO_bswap4(v); |
| OPENSSL_memcpy(out, &v, sizeof(v)); |
| } |
| |
| static inline uint64_t CRYPTO_load_u64_le(const void *in) { |
| uint64_t v; |
| OPENSSL_memcpy(&v, in, sizeof(v)); |
| return v; |
| } |
| |
| static inline void CRYPTO_store_u64_le(void *out, uint64_t v) { |
| OPENSSL_memcpy(out, &v, sizeof(v)); |
| } |
| |
| static inline uint64_t CRYPTO_load_u64_be(const void *ptr) { |
| uint64_t ret; |
| OPENSSL_memcpy(&ret, ptr, sizeof(ret)); |
| return CRYPTO_bswap8(ret); |
| } |
| |
| static inline void CRYPTO_store_u64_be(void *out, uint64_t v) { |
| v = CRYPTO_bswap8(v); |
| OPENSSL_memcpy(out, &v, sizeof(v)); |
| } |
| |
| static inline crypto_word_t CRYPTO_load_word_le(const void *in) { |
| crypto_word_t v; |
| OPENSSL_memcpy(&v, in, sizeof(v)); |
| return v; |
| } |
| |
| static inline void CRYPTO_store_word_le(void *out, crypto_word_t v) { |
| OPENSSL_memcpy(out, &v, sizeof(v)); |
| } |
| |
| static inline crypto_word_t CRYPTO_load_word_be(const void *in) { |
| crypto_word_t v; |
| OPENSSL_memcpy(&v, in, sizeof(v)); |
| #if defined(OPENSSL_64_BIT) |
| static_assert(sizeof(v) == 8, "crypto_word_t has unexpected size"); |
| return CRYPTO_bswap8(v); |
| #else |
| static_assert(sizeof(v) == 4, "crypto_word_t has unexpected size"); |
| return CRYPTO_bswap4(v); |
| #endif |
| } |
| |
| |
| // Bit rotation functions. |
| // |
| // Note these functions use |(-shift) & 31|, etc., because shifting by the bit |
| // width is undefined. Both Clang and GCC recognize this pattern as a rotation, |
| // but MSVC does not. Instead, we call MSVC's built-in functions. |
| |
| static inline uint32_t CRYPTO_rotl_u32(uint32_t value, int shift) { |
| #if defined(_MSC_VER) |
| return _rotl(value, shift); |
| #else |
| return (value << shift) | (value >> ((-shift) & 31)); |
| #endif |
| } |
| |
| static inline uint32_t CRYPTO_rotr_u32(uint32_t value, int shift) { |
| #if defined(_MSC_VER) |
| return _rotr(value, shift); |
| #else |
| return (value >> shift) | (value << ((-shift) & 31)); |
| #endif |
| } |
| |
| static inline uint64_t CRYPTO_rotl_u64(uint64_t value, int shift) { |
| #if defined(_MSC_VER) |
| return _rotl64(value, shift); |
| #else |
| return (value << shift) | (value >> ((-shift) & 63)); |
| #endif |
| } |
| |
| static inline uint64_t CRYPTO_rotr_u64(uint64_t value, int shift) { |
| #if defined(_MSC_VER) |
| return _rotr64(value, shift); |
| #else |
| return (value >> shift) | (value << ((-shift) & 63)); |
| #endif |
| } |
| |
| |
| // FIPS functions. |
| |
| #if defined(BORINGSSL_FIPS) |
| |
| // BORINGSSL_FIPS_abort is called when a FIPS power-on or continuous test |
| // fails. It prevents any further cryptographic operations by the current |
| // process. |
| void BORINGSSL_FIPS_abort(void) __attribute__((noreturn)); |
| |
| // boringssl_self_test_startup runs all startup self tests and returns one on |
| // success or zero on error. Startup self tests do not include lazy tests. |
| // Call |BORINGSSL_self_test| to run every self test. |
| int boringssl_self_test_startup(void); |
| |
| // boringssl_ensure_rsa_self_test checks whether the RSA self-test has been run |
| // in this address space. If not, it runs it and crashes the address space if |
| // unsuccessful. |
| void boringssl_ensure_rsa_self_test(void); |
| |
| // boringssl_ensure_ecc_self_test checks whether the ECDSA and ECDH self-test |
| // has been run in this address space. If not, it runs it and crashes the |
| // address space if unsuccessful. |
| void boringssl_ensure_ecc_self_test(void); |
| |
| // boringssl_ensure_ffdh_self_test checks whether the FFDH self-test has been |
| // run in this address space. If not, it runs it and crashes the address space |
| // if unsuccessful. |
| void boringssl_ensure_ffdh_self_test(void); |
| |
| #else |
| |
| // Outside of FIPS mode, the lazy tests are no-ops. |
| |
| OPENSSL_INLINE void boringssl_ensure_rsa_self_test(void) {} |
| OPENSSL_INLINE void boringssl_ensure_ecc_self_test(void) {} |
| OPENSSL_INLINE void boringssl_ensure_ffdh_self_test(void) {} |
| |
| #endif // FIPS |
| |
| // boringssl_self_test_sha256 performs a SHA-256 KAT. |
| int boringssl_self_test_sha256(void); |
| |
| // boringssl_self_test_sha512 performs a SHA-512 KAT. |
| int boringssl_self_test_sha512(void); |
| |
| // boringssl_self_test_hmac_sha256 performs an HMAC-SHA-256 KAT. |
| int boringssl_self_test_hmac_sha256(void); |
| |
| #if defined(BORINGSSL_FIPS_COUNTERS) |
| void boringssl_fips_inc_counter(enum fips_counter_t counter); |
| #else |
| OPENSSL_INLINE void boringssl_fips_inc_counter(enum fips_counter_t counter) {} |
| #endif |
| |
| #if defined(BORINGSSL_FIPS_BREAK_TESTS) |
| OPENSSL_INLINE int boringssl_fips_break_test(const char *test) { |
| const char *const value = getenv("BORINGSSL_FIPS_BREAK_TEST"); |
| return value != NULL && strcmp(value, test) == 0; |
| } |
| #else |
| OPENSSL_INLINE int boringssl_fips_break_test(const char *test) { |
| return 0; |
| } |
| #endif // BORINGSSL_FIPS_BREAK_TESTS |
| |
| |
| // Runtime CPU feature support |
| |
| #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) |
| // OPENSSL_ia32cap_P contains the Intel CPUID bits when running on an x86 or |
| // x86-64 system. |
| // |
| // Index 0: |
| // EDX for CPUID where EAX = 1 |
| // Bit 20 is always zero |
| // Bit 28 is adjusted to reflect whether the data cache is shared between |
| // multiple logical cores |
| // Bit 30 is used to indicate an Intel CPU |
| // Index 1: |
| // ECX for CPUID where EAX = 1 |
| // Bit 11 is used to indicate AMD XOP support, not SDBG |
| // Index 2: |
| // EBX for CPUID where EAX = 7 |
| // Index 3: |
| // ECX for CPUID where EAX = 7 |
| // |
| // Note: the CPUID bits are pre-adjusted for the OSXSAVE bit and the YMM and XMM |
| // bits in XCR0, so it is not necessary to check those. |
| // |
| // From C, this symbol should only be accessed with |OPENSSL_get_ia32cap|. |
| extern uint32_t OPENSSL_ia32cap_P[4]; |
| |
| // OPENSSL_get_ia32cap initializes the library if needed and returns the |idx|th |
| // entry of |OPENSSL_ia32cap_P|. It is marked as a pure function so duplicate |
| // calls can be merged by the compiler, at least when indices match. |
| OPENSSL_ATTR_PURE uint32_t OPENSSL_get_ia32cap(int idx); |
| |
| // See Intel manual, volume 2A, table 3-11. |
| |
| OPENSSL_INLINE int CRYPTO_is_FXSR_capable(void) { |
| #if defined(__FXSR__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(0) & (1u << 24)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_intel_cpu(void) { |
| // The reserved bit 30 is used to indicate an Intel CPU. |
| return (OPENSSL_get_ia32cap(0) & (1u << 30)) != 0; |
| } |
| |
| // See Intel manual, volume 2A, table 3-10. |
| |
| OPENSSL_INLINE int CRYPTO_is_PCLMUL_capable(void) { |
| #if defined(__PCLMUL__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 1)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_SSSE3_capable(void) { |
| #if defined(__SSSE3__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 9)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_SSE4_1_capable(void) { |
| #if defined(__SSE4_1__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 19)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_MOVBE_capable(void) { |
| #if defined(__MOVBE__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 22)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_AESNI_capable(void) { |
| #if defined(__AES__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 25)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_AVX_capable(void) { |
| #if defined(__AVX__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 28)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_RDRAND_capable(void) { |
| // The GCC/Clang feature name and preprocessor symbol for RDRAND are "rdrnd" |
| // and |__RDRND__|, respectively. |
| #if defined(__RDRND__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(1) & (1u << 30)) != 0; |
| #endif |
| } |
| |
| // See Intel manual, volume 2A, table 3-8. |
| |
| OPENSSL_INLINE int CRYPTO_is_BMI1_capable(void) { |
| #if defined(__BMI1__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(2) & (1u << 3)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_AVX2_capable(void) { |
| #if defined(__AVX2__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(2) & (1u << 5)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_BMI2_capable(void) { |
| #if defined(__BMI2__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(2) & (1u << 8)) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_ADX_capable(void) { |
| #if defined(__ADX__) |
| return 1; |
| #else |
| return (OPENSSL_get_ia32cap(2) & (1u << 19)) != 0; |
| #endif |
| } |
| |
| #endif // OPENSSL_X86 || OPENSSL_X86_64 |
| |
| #if defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64) |
| |
| // OPENSSL_armcap_P contains ARM CPU capabilities. From C, this should only be |
| // accessed with |OPENSSL_get_armcap|. |
| extern uint32_t OPENSSL_armcap_P; |
| |
| // OPENSSL_get_armcap initializes the library if needed and returns ARM CPU |
| // capabilities. It is marked as a pure function so duplicate calls can be |
| // merged by the compiler, at least when indices match. |
| OPENSSL_ATTR_PURE uint32_t OPENSSL_get_armcap(void); |
| |
| // We do not detect any features at runtime on several 32-bit Arm platforms. |
| // Apple platforms and OpenBSD require NEON and moved to 64-bit to pick up Armv8 |
| // extensions. Android baremetal does not aim to support 32-bit Arm at all, but |
| // it simplifies things to make it build. |
| #if defined(OPENSSL_ARM) && !defined(OPENSSL_STATIC_ARMCAP) && \ |
| (defined(OPENSSL_APPLE) || defined(OPENSSL_OPENBSD) || \ |
| defined(ANDROID_BAREMETAL)) |
| #define OPENSSL_STATIC_ARMCAP |
| #endif |
| |
| // Normalize some older feature flags to their modern ACLE values. |
| // https://developer.arm.com/architectures/system-architectures/software-standards/acle |
| #if defined(__ARM_NEON__) && !defined(__ARM_NEON) |
| #define __ARM_NEON 1 |
| #endif |
| #if defined(__ARM_FEATURE_CRYPTO) |
| #if !defined(__ARM_FEATURE_AES) |
| #define __ARM_FEATURE_AES 1 |
| #endif |
| #if !defined(__ARM_FEATURE_SHA2) |
| #define __ARM_FEATURE_SHA2 1 |
| #endif |
| #endif |
| |
| // CRYPTO_is_NEON_capable returns true if the current CPU has a NEON unit. If |
| // this is known statically, it is a constant inline function. |
| OPENSSL_INLINE int CRYPTO_is_NEON_capable(void) { |
| #if defined(OPENSSL_STATIC_ARMCAP_NEON) || defined(__ARM_NEON) |
| return 1; |
| #elif defined(OPENSSL_STATIC_ARMCAP) |
| return 0; |
| #else |
| return (OPENSSL_get_armcap() & ARMV7_NEON) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_ARMv8_AES_capable(void) { |
| #if defined(OPENSSL_STATIC_ARMCAP_AES) || defined(__ARM_FEATURE_AES) |
| return 1; |
| #elif defined(OPENSSL_STATIC_ARMCAP) |
| return 0; |
| #else |
| return (OPENSSL_get_armcap() & ARMV8_AES) != 0; |
| #endif |
| } |
| |
| OPENSSL_INLINE int CRYPTO_is_ARMv8_PMULL_capable(void) { |
| #if defined(OPENSSL_STATIC_ARMCAP_PMULL) || defined(__ARM_FEATURE_AES) |
| return 1; |
| #elif defined(OPENSSL_STATIC_ARMCAP) |
| return 0; |
| #else |
| return (OPENSSL_get_armcap() & ARMV8_PMULL) != 0; |
| #endif |
| } |
| |
| #endif // OPENSSL_ARM || OPENSSL_AARCH64 |
| |
| #if defined(BORINGSSL_DISPATCH_TEST) |
| // Runtime CPU dispatch testing support |
| |
| // BORINGSSL_function_hit is an array of flags. The following functions will |
| // set these flags if BORINGSSL_DISPATCH_TEST is defined. |
| // 0: aes_hw_ctr32_encrypt_blocks |
| // 1: aes_hw_encrypt |
| // 2: aesni_gcm_encrypt |
| // 3: aes_hw_set_encrypt_key |
| // 4: vpaes_encrypt |
| // 5: vpaes_set_encrypt_key |
| extern uint8_t BORINGSSL_function_hit[7]; |
| #endif // BORINGSSL_DISPATCH_TEST |
| |
| // OPENSSL_vasprintf_internal is just like |vasprintf(3)|. If |system_malloc| is |
| // 0, memory will be allocated with |OPENSSL_malloc| and must be freed with |
| // |OPENSSL_free|. Otherwise the system |malloc| function is used and the memory |
| // must be freed with the system |free| function. |
| OPENSSL_EXPORT int OPENSSL_vasprintf_internal(char **str, const char *format, |
| va_list args, int system_malloc) |
| OPENSSL_PRINTF_FORMAT_FUNC(2, 0); |
| |
| #if defined(__cplusplus) |
| } // extern C |
| #endif |
| |
| #endif // OPENSSL_HEADER_CRYPTO_INTERNAL_H |