| // Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include <assert.h> | |
| #include <limits.h> | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <string_view> | |
| #include <openssl/asn1.h> | |
| #include <openssl/base.h> | |
| #include <openssl/base64.h> | |
| #include <openssl/bio.h> | |
| #include <openssl/buf.h> | |
| #include <openssl/cipher.h> | |
| #include <openssl/des.h> | |
| #include <openssl/err.h> | |
| #include <openssl/evp.h> | |
| #include <openssl/mem.h> | |
| #include <openssl/obj.h> | |
| #include <openssl/pem.h> | |
| #include <openssl/rand.h> | |
| #include <openssl/x509.h> | |
| #include "../internal.h" | |
| #include "internal.h" | |
| #define MIN_LENGTH 4 | |
| using namespace bssl; | |
| static int load_iv(const char **fromp, unsigned char *to, size_t num); | |
| static int check_pem(const std::string_view nm, const std::string_view name); | |
| // PEM_proc_type appends a Proc-Type header to |buf|, determined by |type|. | |
| static void PEM_proc_type(char buf[PEM_BUFSIZE], int type) { | |
| const char *str; | |
| if (type == PEM_TYPE_ENCRYPTED) { | |
| str = "ENCRYPTED"; | |
| } else if (type == PEM_TYPE_MIC_CLEAR) { | |
| str = "MIC-CLEAR"; | |
| } else if (type == PEM_TYPE_MIC_ONLY) { | |
| str = "MIC-ONLY"; | |
| } else { | |
| str = "BAD-TYPE"; | |
| } | |
| OPENSSL_strlcat(buf, "Proc-Type: 4,", PEM_BUFSIZE); | |
| OPENSSL_strlcat(buf, str, PEM_BUFSIZE); | |
| OPENSSL_strlcat(buf, "\n", PEM_BUFSIZE); | |
| } | |
| // PEM_dek_info appends a DEK-Info header to |buf|, with an algorithm of |type| | |
| // and a single parameter, specified by hex-encoding |len| bytes from |str|. | |
| static void PEM_dek_info(char buf[PEM_BUFSIZE], const char *type, size_t len, | |
| char *str) { | |
| static const unsigned char map[17] = "0123456789ABCDEF"; | |
| OPENSSL_strlcat(buf, "DEK-Info: ", PEM_BUFSIZE); | |
| OPENSSL_strlcat(buf, type, PEM_BUFSIZE); | |
| OPENSSL_strlcat(buf, ",", PEM_BUFSIZE); | |
| const size_t used = strlen(buf); | |
| const size_t available = PEM_BUFSIZE - used; | |
| if (len * 2 < len || len * 2 + 2 < len || available < len * 2 + 2) { | |
| return; | |
| } | |
| for (size_t i = 0; i < len; i++) { | |
| buf[used + i * 2] = map[(str[i] >> 4) & 0x0f]; | |
| buf[used + i * 2 + 1] = map[(str[i]) & 0x0f]; | |
| } | |
| buf[used + len * 2] = '\n'; | |
| buf[used + len * 2 + 1] = '\0'; | |
| } | |
| void *PEM_ASN1_read(d2i_of_void *d2i, const char *name, FILE *fp, void **x, | |
| pem_password_cb *cb, void *u) { | |
| BIO *b = BIO_new_fp(fp, BIO_NOCLOSE); | |
| if (b == nullptr) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_BUF_LIB); | |
| return nullptr; | |
| } | |
| void *ret = PEM_ASN1_read_bio(d2i, name, b, x, cb, u); | |
| BIO_free(b); | |
| return ret; | |
| } | |
| static int check_pem(const std::string_view nm, const std::string_view name) { | |
| // Normal matching nm and name | |
| if (nm == name) { | |
| return 1; | |
| } | |
| // Make PEM_STRING_EVP_PKEY match any private key | |
| if (name == PEM_STRING_EVP_PKEY) { | |
| return nm == PEM_STRING_PKCS8 || nm == PEM_STRING_PKCS8INF || | |
| nm == PEM_STRING_RSA || nm == PEM_STRING_EC || nm == PEM_STRING_DSA; | |
| } | |
| // Permit older strings | |
| if (nm == PEM_STRING_X509_OLD && name == PEM_STRING_X509) { | |
| return 1; | |
| } | |
| if (nm == PEM_STRING_X509_REQ_OLD && name == PEM_STRING_X509_REQ) { | |
| return 1; | |
| } | |
| // Allow normal certs to be read as trusted certs | |
| if (nm == PEM_STRING_X509 && name == PEM_STRING_X509_TRUSTED) { | |
| return 1; | |
| } | |
| if (nm == PEM_STRING_X509_OLD && name == PEM_STRING_X509_TRUSTED) { | |
| return 1; | |
| } | |
| // Some CAs use PKCS#7 with CERTIFICATE headers | |
| if (nm == PEM_STRING_X509 && name == PEM_STRING_PKCS7) { | |
| return 1; | |
| } | |
| if (nm == PEM_STRING_PKCS7_SIGNED && name == PEM_STRING_PKCS7) { | |
| return 1; | |
| } | |
| #ifndef OPENSSL_NO_CMS | |
| if (nm == PEM_STRING_X509 && name == PEM_STRING_CMS) { | |
| return 1; | |
| } | |
| // Allow CMS to be read from PKCS#7 headers | |
| if (nm == PEM_STRING_PKCS7 && name == PEM_STRING_CMS) { | |
| return 1; | |
| } | |
| #endif | |
| return 0; | |
| } | |
| static const EVP_CIPHER *cipher_by_name(const std::string_view name) { | |
| // This is similar to the (deprecated) function |EVP_get_cipherbyname|. Note | |
| // the PEM code assumes that ciphers have at least 8 bytes of IV, at most 20 | |
| // bytes of overhead and generally behave like CBC mode. | |
| if (name == SN_des_cbc) { | |
| return EVP_des_cbc(); | |
| } else if (name == SN_des_ede3_cbc) { | |
| return EVP_des_ede3_cbc(); | |
| } else if (name == SN_aes_128_cbc) { | |
| return EVP_aes_128_cbc(); | |
| } else if (name == SN_aes_192_cbc) { | |
| return EVP_aes_192_cbc(); | |
| } else if (name == SN_aes_256_cbc) { | |
| return EVP_aes_256_cbc(); | |
| } else { | |
| return nullptr; | |
| } | |
| } | |
| int PEM_bytes_read_bio(unsigned char **pdata, long *plen, char **pnm, | |
| const char *name, BIO *bp, pem_password_cb *cb, | |
| void *u) { | |
| EVP_CIPHER_INFO cipher; | |
| UniquePtr<char> nm; | |
| UniquePtr<char> header; | |
| Array<uint8_t> data; | |
| size_t ulen; | |
| size_t unused = 0; | |
| for (;;) { | |
| if (!PEM_read_bio_inner(bp, &nm, &header, &data)) { | |
| if (ERR_equals(ERR_peek_error(), ERR_LIB_PEM, PEM_R_NO_START_LINE)) { | |
| ERR_add_error_data(2, "Expecting: ", name); | |
| } | |
| return 0; | |
| } | |
| if (data.size() > LONG_MAX) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_OVERFLOW); | |
| return 0; | |
| } | |
| if (check_pem(nm.get(), name)) { | |
| break; | |
| } | |
| } | |
| if (!PEM_get_EVP_CIPHER_INFO(header.get(), &cipher)) { | |
| return 0; | |
| } | |
| ulen = data.size(); | |
| if (!PEM_do_header(&cipher, data.data(), &ulen, cb, u)) { | |
| return 0; | |
| } | |
| // Release the buffer to the caller. | |
| // Note that |PEM_do_header| may have reduced the length after decrypting | |
| // in-place. | |
| // This will not overflow because |data.size()| was checked to fit in |long| | |
| // above. | |
| data.Release(pdata, &unused); | |
| *plen = static_cast<long>(ulen); | |
| if (pnm) { | |
| *pnm = nm.release(); | |
| } | |
| return 1; | |
| } | |
| int PEM_ASN1_write(i2d_of_void *i2d, const char *name, FILE *fp, void *x, | |
| const EVP_CIPHER *enc, const unsigned char *pass, | |
| int pass_len, pem_password_cb *callback, void *u) { | |
| BIO *b = BIO_new_fp(fp, BIO_NOCLOSE); | |
| if (b == nullptr) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_BUF_LIB); | |
| return 0; | |
| } | |
| int ret = | |
| PEM_ASN1_write_bio(i2d, name, b, x, enc, pass, pass_len, callback, u); | |
| BIO_free(b); | |
| return ret; | |
| } | |
| int PEM_ASN1_write_bio(i2d_of_void *i2d, const char *name, BIO *bp, void *x, | |
| const EVP_CIPHER *enc, const unsigned char *pass, | |
| int pass_len, pem_password_cb *callback, void *u) { | |
| ScopedEVP_CIPHER_CTX ctx; | |
| int dsize = 0, ret = 0; | |
| size_t i, j, data_size; | |
| unsigned char *p, *data = nullptr; | |
| const char *objstr = nullptr; | |
| char buf[PEM_BUFSIZE]; | |
| unsigned char key[EVP_MAX_KEY_LENGTH]; | |
| unsigned char iv[EVP_MAX_IV_LENGTH]; | |
| if (enc != nullptr) { | |
| objstr = OBJ_nid2sn(EVP_CIPHER_nid(enc)); | |
| if (objstr == nullptr || cipher_by_name(objstr) == nullptr || | |
| EVP_CIPHER_iv_length(enc) < 8) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_UNSUPPORTED_CIPHER); | |
| goto err; | |
| } | |
| } | |
| if ((dsize = i2d(x, nullptr)) < 0) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_ASN1_LIB); | |
| dsize = 0; | |
| goto err; | |
| } | |
| // dzise + 8 bytes are needed | |
| // actually it needs the cipher block size extra... | |
| data_size = static_cast<size_t>(dsize) + 20; | |
| data = (unsigned char *)OPENSSL_malloc(data_size); | |
| if (data == nullptr) { | |
| goto err; | |
| } | |
| p = data; | |
| i = i2d(x, &p); | |
| if (enc != nullptr) { | |
| const unsigned iv_len = EVP_CIPHER_iv_length(enc); | |
| if (pass == nullptr) { | |
| if (!callback) { | |
| callback = PEM_def_callback; | |
| } | |
| pass_len = (*callback)(buf, PEM_BUFSIZE, 1, u); | |
| if (pass_len < 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_READ_KEY); | |
| goto err; | |
| } | |
| pass = (const unsigned char *)buf; | |
| } | |
| assert(iv_len <= sizeof(iv)); | |
| if (!RAND_bytes(iv, iv_len)) { // Generate a salt | |
| goto err; | |
| } | |
| // The 'iv' is used as the iv and as a salt. It is NOT taken from | |
| // the BytesToKey function | |
| if (!EVP_BytesToKey(enc, EVP_md5(), iv, pass, pass_len, 1, key, nullptr)) { | |
| goto err; | |
| } | |
| if (pass == (const unsigned char *)buf) { | |
| OPENSSL_cleanse(buf, PEM_BUFSIZE); | |
| } | |
| assert(strlen(objstr) + 23 + 2 * iv_len + 13 <= sizeof(buf)); | |
| buf[0] = '\0'; | |
| PEM_proc_type(buf, PEM_TYPE_ENCRYPTED); | |
| PEM_dek_info(buf, objstr, iv_len, (char *)iv); | |
| // k=strlen(buf); | |
| ret = 1; | |
| if (!EVP_EncryptInit_ex(ctx.get(), enc, nullptr, key, iv) || | |
| !EVP_EncryptUpdate_ex(ctx.get(), data, &j, data_size, data, i) || | |
| !EVP_EncryptFinal_ex2(ctx.get(), &(data[j]), &i, data_size - j)) { | |
| ret = 0; | |
| } else { | |
| i += j; | |
| } | |
| if (ret == 0) { | |
| goto err; | |
| } | |
| } else { | |
| ret = 1; | |
| buf[0] = '\0'; | |
| } | |
| i = PEM_write_bio(bp, name, buf, data, i); | |
| if (i <= 0) { | |
| ret = 0; | |
| } | |
| err: | |
| OPENSSL_cleanse(key, sizeof(key)); | |
| OPENSSL_cleanse(iv, sizeof(iv)); | |
| OPENSSL_cleanse(buf, PEM_BUFSIZE); | |
| OPENSSL_free(data); | |
| return ret; | |
| } | |
| int bssl::PEM_do_header(const EVP_CIPHER_INFO *cipher, unsigned char *data, | |
| size_t *len, pem_password_cb *callback, void *u) { | |
| int pass_len; | |
| ScopedEVP_CIPHER_CTX ctx; | |
| unsigned char key[EVP_MAX_KEY_LENGTH]; | |
| char buf[PEM_BUFSIZE]; | |
| const size_t in_len = *len; | |
| if (cipher->cipher == nullptr) { | |
| return 1; | |
| } | |
| pass_len = 0; | |
| if (!callback) { | |
| callback = PEM_def_callback; | |
| } | |
| pass_len = callback(buf, PEM_BUFSIZE, 0, u); | |
| if (pass_len < 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_BAD_PASSWORD_READ); | |
| return 0; | |
| } | |
| if (!EVP_BytesToKey(cipher->cipher, EVP_md5(), cipher->iv, | |
| (unsigned char *)buf, pass_len, 1, key, nullptr)) { | |
| return 0; | |
| } | |
| // Safety: we have checked |*len| before narrowing so that |EVP_DecryptUpdate| | |
| // can safely work with it. | |
| size_t out_len1 = 0; | |
| size_t out_len2 = 0; | |
| if (!EVP_DecryptInit_ex(ctx.get(), cipher->cipher, nullptr, key, | |
| cipher->iv) || | |
| !EVP_DecryptUpdate_ex(ctx.get(), data, &out_len1, in_len, data, in_len) || | |
| !EVP_DecryptFinal_ex2(ctx.get(), data + out_len1, &out_len2, | |
| in_len - out_len1)) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_BAD_DECRYPT); | |
| return 0; | |
| } | |
| *len = out_len1 + out_len2; | |
| return 1; | |
| } | |
| int bssl::PEM_get_EVP_CIPHER_INFO(const char *header, EVP_CIPHER_INFO *cipher) { | |
| cipher->cipher = nullptr; | |
| OPENSSL_memset(cipher->iv, 0, sizeof(cipher->iv)); | |
| if ((header == nullptr) || (*header == '\0') || (*header == '\n')) { | |
| return 1; | |
| } | |
| if (strncmp(header, "Proc-Type: ", 11) != 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_NOT_PROC_TYPE); | |
| return 0; | |
| } | |
| header += 11; | |
| if (header[0] != '4' || header[1] != ',') { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_UNSUPPORTED_PROC_TYPE_VERSION); | |
| return 0; | |
| } | |
| header += 2; | |
| if (strncmp(header, "ENCRYPTED", 9) != 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_NOT_ENCRYPTED); | |
| return 0; | |
| } | |
| for (; (*header != '\n') && (*header != '\0'); header++) { | |
| ; | |
| } | |
| if (*header == '\0') { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_SHORT_HEADER); | |
| return 0; | |
| } | |
| header++; | |
| if (strncmp(header, "DEK-Info: ", 10) != 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_NOT_DEK_INFO); | |
| return 0; | |
| } | |
| header += 10; | |
| const char *p = header; | |
| for (;;) { | |
| char c = *header; | |
| if (!((c >= 'A' && c <= 'Z') || c == '-' || OPENSSL_isdigit(c))) { | |
| break; | |
| } | |
| header++; | |
| } | |
| cipher->cipher = cipher_by_name(std::string_view(p, header - p)); | |
| header++; | |
| if (cipher->cipher == nullptr) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_UNSUPPORTED_ENCRYPTION); | |
| return 0; | |
| } | |
| // The IV parameter must be at least 8 bytes long to be used as the salt in | |
| // the KDF. (This should not happen given |cipher_by_name|.) | |
| if (EVP_CIPHER_iv_length(cipher->cipher) < 8) { | |
| assert(0); | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_UNSUPPORTED_ENCRYPTION); | |
| return 0; | |
| } | |
| const char **header_pp = &header; | |
| if (!load_iv(header_pp, cipher->iv, EVP_CIPHER_iv_length(cipher->cipher))) { | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int load_iv(const char **fromp, unsigned char *to, size_t num) { | |
| uint8_t v; | |
| const char *from; | |
| from = *fromp; | |
| for (size_t i = 0; i < num; i++) { | |
| to[i] = 0; | |
| } | |
| num *= 2; | |
| for (size_t i = 0; i < num; i++) { | |
| if (!OPENSSL_fromxdigit(&v, *from)) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_BAD_IV_CHARS); | |
| return 0; | |
| } | |
| from++; | |
| to[i / 2] |= v << (!(i & 1)) * 4; | |
| } | |
| *fromp = from; | |
| return 1; | |
| } | |
| int PEM_write(FILE *fp, const char *name, const char *header, | |
| const unsigned char *data, long len) { | |
| BIO *b = BIO_new_fp(fp, BIO_NOCLOSE); | |
| if (b == nullptr) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_BUF_LIB); | |
| return 0; | |
| } | |
| int ret = PEM_write_bio(b, name, header, data, len); | |
| BIO_free(b); | |
| return ret; | |
| } | |
| int PEM_write_bio(BIO *bp, const char *name, const char *header, | |
| const unsigned char *data, long len) { | |
| int nlen, n, i, j, outl; | |
| unsigned char *buf = nullptr; | |
| EVP_ENCODE_CTX ctx; | |
| int reason = ERR_R_BUF_LIB; | |
| int retval = 0; | |
| EVP_EncodeInit(&ctx); | |
| nlen = strlen(name); | |
| if ((BIO_write(bp, "-----BEGIN ", 11) != 11) || | |
| (BIO_write(bp, name, nlen) != nlen) || | |
| (BIO_write(bp, "-----\n", 6) != 6)) { | |
| goto err; | |
| } | |
| i = strlen(header); | |
| if (i > 0) { | |
| if ((BIO_write(bp, header, i) != i) || (BIO_write(bp, "\n", 1) != 1)) { | |
| goto err; | |
| } | |
| } | |
| buf = reinterpret_cast<uint8_t *>(OPENSSL_malloc(PEM_BUFSIZE * 8)); | |
| if (buf == nullptr) { | |
| goto err; | |
| } | |
| i = j = 0; | |
| while (len > 0) { | |
| n = (int)((len > (PEM_BUFSIZE * 5)) ? (PEM_BUFSIZE * 5) : len); | |
| EVP_EncodeUpdate(&ctx, buf, &outl, &(data[j]), n); | |
| if ((outl) && (BIO_write(bp, (char *)buf, outl) != outl)) { | |
| goto err; | |
| } | |
| i += outl; | |
| len -= n; | |
| j += n; | |
| } | |
| EVP_EncodeFinal(&ctx, buf, &outl); | |
| if ((outl > 0) && (BIO_write(bp, (char *)buf, outl) != outl)) { | |
| goto err; | |
| } | |
| if ((BIO_write(bp, "-----END ", 9) != 9) || | |
| (BIO_write(bp, name, nlen) != nlen) || | |
| (BIO_write(bp, "-----\n", 6) != 6)) { | |
| goto err; | |
| } | |
| retval = i + outl; | |
| err: | |
| if (retval == 0) { | |
| OPENSSL_PUT_ERROR(PEM, reason); | |
| } | |
| OPENSSL_free(buf); | |
| return retval; | |
| } | |
| int PEM_read(FILE *fp, char **name, char **header, unsigned char **data, | |
| long *len) { | |
| BIO *b = BIO_new_fp(fp, BIO_NOCLOSE); | |
| if (b == nullptr) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_BUF_LIB); | |
| return 0; | |
| } | |
| int ret = PEM_read_bio(b, name, header, data, len); | |
| BIO_free(b); | |
| return ret; | |
| } | |
| int bssl::PEM_read_bio_inner(BIO *bp, UniquePtr<char> *name, | |
| UniquePtr<char> *header, Array<uint8_t> *data) { | |
| EVP_ENCODE_CTX ctx; | |
| int end = 0, i, k, bl = 0, hl = 0, nohead = 0; | |
| char buf[256]; | |
| BUF_MEM *nameB; | |
| BUF_MEM *headerB; | |
| BUF_MEM *dataB, *tmpB; | |
| nameB = BUF_MEM_new(); | |
| headerB = BUF_MEM_new(); | |
| dataB = BUF_MEM_new(); | |
| if ((nameB == nullptr) || (headerB == nullptr) || (dataB == nullptr)) { | |
| goto err; | |
| } | |
| buf[254] = '\0'; | |
| for (;;) { | |
| i = BIO_gets(bp, buf, 254); | |
| if (i <= 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_NO_START_LINE); | |
| goto err; | |
| } | |
| while ((i >= 0) && (buf[i] <= ' ')) { | |
| i--; | |
| } | |
| buf[++i] = '\n'; | |
| buf[++i] = '\0'; | |
| if (strncmp(buf, "-----BEGIN ", 11) == 0) { | |
| i = strlen(&(buf[11])); | |
| if (strncmp(&(buf[11 + i - 6]), "-----\n", 6) != 0) { | |
| continue; | |
| } | |
| if (!BUF_MEM_grow(nameB, i + 9)) { | |
| goto err; | |
| } | |
| OPENSSL_memcpy(nameB->data, &(buf[11]), i - 6); | |
| nameB->data[i - 6] = '\0'; | |
| break; | |
| } | |
| } | |
| hl = 0; | |
| if (!BUF_MEM_grow(headerB, 256)) { | |
| goto err; | |
| } | |
| headerB->data[0] = '\0'; | |
| for (;;) { | |
| i = BIO_gets(bp, buf, 254); | |
| if (i <= 0) { | |
| break; | |
| } | |
| while ((i >= 0) && (buf[i] <= ' ')) { | |
| i--; | |
| } | |
| buf[++i] = '\n'; | |
| buf[++i] = '\0'; | |
| if (buf[0] == '\n') { | |
| break; | |
| } | |
| if (!BUF_MEM_grow(headerB, hl + i + 9)) { | |
| goto err; | |
| } | |
| if (strncmp(buf, "-----END ", 9) == 0) { | |
| nohead = 1; | |
| break; | |
| } | |
| OPENSSL_memcpy(&(headerB->data[hl]), buf, i); | |
| headerB->data[hl + i] = '\0'; | |
| hl += i; | |
| } | |
| bl = 0; | |
| if (!BUF_MEM_grow(dataB, 1024)) { | |
| goto err; | |
| } | |
| dataB->data[0] = '\0'; | |
| if (!nohead) { | |
| for (;;) { | |
| i = BIO_gets(bp, buf, 254); | |
| if (i <= 0) { | |
| break; | |
| } | |
| while ((i >= 0) && (buf[i] <= ' ')) { | |
| i--; | |
| } | |
| buf[++i] = '\n'; | |
| buf[++i] = '\0'; | |
| if (i != 65) { | |
| end = 1; | |
| } | |
| if (strncmp(buf, "-----END ", 9) == 0) { | |
| break; | |
| } | |
| if (i > 65) { | |
| break; | |
| } | |
| if (!BUF_MEM_grow_clean(dataB, i + bl + 9)) { | |
| goto err; | |
| } | |
| OPENSSL_memcpy(&(dataB->data[bl]), buf, i); | |
| dataB->data[bl + i] = '\0'; | |
| bl += i; | |
| if (end) { | |
| buf[0] = '\0'; | |
| i = BIO_gets(bp, buf, 254); | |
| if (i <= 0) { | |
| break; | |
| } | |
| while ((i >= 0) && (buf[i] <= ' ')) { | |
| i--; | |
| } | |
| buf[++i] = '\n'; | |
| buf[++i] = '\0'; | |
| break; | |
| } | |
| } | |
| } else { | |
| tmpB = headerB; | |
| headerB = dataB; | |
| dataB = tmpB; | |
| bl = hl; | |
| } | |
| i = strlen(nameB->data); | |
| if ((strncmp(buf, "-----END ", 9) != 0) || | |
| (strncmp(nameB->data, &(buf[9]), i) != 0) || | |
| (strncmp(&(buf[9 + i]), "-----\n", 6) != 0)) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_BAD_END_LINE); | |
| goto err; | |
| } | |
| EVP_DecodeInit(&ctx); | |
| i = EVP_DecodeUpdate(&ctx, (unsigned char *)dataB->data, &bl, | |
| (unsigned char *)dataB->data, bl); | |
| if (i < 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_BAD_BASE64_DECODE); | |
| goto err; | |
| } | |
| i = EVP_DecodeFinal(&ctx, (unsigned char *)&(dataB->data[bl]), &k); | |
| if (i < 0) { | |
| OPENSSL_PUT_ERROR(PEM, PEM_R_BAD_BASE64_DECODE); | |
| goto err; | |
| } | |
| bl += k; | |
| if (bl == 0) { | |
| goto err; | |
| } | |
| // Transfer ownership of buffers | |
| name->reset(nameB->data); | |
| header->reset(headerB->data); | |
| data->Reset((uint8_t *)dataB->data, bl); | |
| OPENSSL_free(nameB); | |
| OPENSSL_free(headerB); | |
| OPENSSL_free(dataB); | |
| return 1; | |
| err: | |
| BUF_MEM_free(nameB); | |
| BUF_MEM_free(headerB); | |
| BUF_MEM_free(dataB); | |
| return 0; | |
| } | |
| int PEM_read_bio(BIO *bp, char **name, char **header, unsigned char **data, | |
| long *len) { | |
| UniquePtr<char> owned_name; | |
| UniquePtr<char> owned_header; | |
| Array<uint8_t> owned_data; | |
| if (!PEM_read_bio_inner(bp, &owned_name, &owned_header, &owned_data)) { | |
| return 0; | |
| } | |
| if (owned_data.size() > LONG_MAX) { | |
| OPENSSL_PUT_ERROR(PEM, ERR_R_OVERFLOW); | |
| return 0; | |
| } | |
| size_t ulen = 0; | |
| *name = owned_name.release(); | |
| *header = owned_header.release(); | |
| owned_data.Release(data, &ulen); | |
| // Safety: we checked that |ulen| <= |LONG_MAX|. | |
| *len = static_cast<long>(ulen); | |
| return 1; | |
| } | |
| int PEM_def_callback(char *buf, int size, int rwflag, void *userdata) { | |
| if (!buf || !userdata || size < 0) { | |
| return -1; | |
| } | |
| size_t len = strlen((char *)userdata); | |
| if (len >= (size_t)size) { | |
| return -1; | |
| } | |
| OPENSSL_strlcpy(buf, reinterpret_cast<char *>(userdata), (size_t)size); | |
| return (int)len; | |
| } |