|  | // Copyright 2005-2016 The OpenSSL Project Authors. All Rights Reserved. | 
|  | // | 
|  | // Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | // you may not use this file except in compliance with the License. | 
|  | // You may obtain a copy of the License at | 
|  | // | 
|  | //     https://www.apache.org/licenses/LICENSE-2.0 | 
|  | // | 
|  | // Unless required by applicable law or agreed to in writing, software | 
|  | // distributed under the License is distributed on an "AS IS" BASIS, | 
|  | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | // See the License for the specific language governing permissions and | 
|  | // limitations under the License. | 
|  |  | 
|  | #include <openssl/ssl.h> | 
|  |  | 
|  | #include <assert.h> | 
|  | #include <limits.h> | 
|  | #include <string.h> | 
|  |  | 
|  | #include <openssl/err.h> | 
|  | #include <openssl/mem.h> | 
|  | #include <openssl/nid.h> | 
|  |  | 
|  | #include "../crypto/internal.h" | 
|  | #include "internal.h" | 
|  |  | 
|  |  | 
|  | BSSL_NAMESPACE_BEGIN | 
|  |  | 
|  | DTLS1_STATE::DTLS1_STATE() | 
|  | : has_change_cipher_spec(false), | 
|  | outgoing_messages_complete(false), | 
|  | flight_has_reply(false), | 
|  | handshake_write_overflow(false), | 
|  | handshake_read_overflow(false), | 
|  | sending_flight(false), | 
|  | sending_ack(false), | 
|  | queued_key_update(QueuedKeyUpdate::kNone) {} | 
|  |  | 
|  | DTLS1_STATE::~DTLS1_STATE() {} | 
|  |  | 
|  | bool DTLS1_STATE::Init() { | 
|  | // Set up the initial epochs. | 
|  | read_epoch.aead = SSLAEADContext::CreateNullCipher(); | 
|  | write_epoch.aead = SSLAEADContext::CreateNullCipher(); | 
|  | if (read_epoch.aead == nullptr || write_epoch.aead == nullptr) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool dtls1_new(SSL *ssl) { | 
|  | if (!tls_new(ssl)) { | 
|  | return false; | 
|  | } | 
|  | UniquePtr<DTLS1_STATE> d1 = MakeUnique<DTLS1_STATE>(); | 
|  | if (!d1 || !d1->Init()) { | 
|  | tls_free(ssl); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ssl->d1 = d1.release(); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void dtls1_free(SSL *ssl) { | 
|  | tls_free(ssl); | 
|  |  | 
|  | if (ssl == NULL) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | Delete(ssl->d1); | 
|  | ssl->d1 = NULL; | 
|  | } | 
|  |  | 
|  | void DTLSTimer::StartMicroseconds(OPENSSL_timeval now, uint64_t microseconds) { | 
|  | uint64_t seconds = microseconds / 1000000; | 
|  | microseconds %= 1000000; | 
|  |  | 
|  | now.tv_usec += microseconds; | 
|  | if (now.tv_usec >= 1000000) { | 
|  | now.tv_usec -= 1000000; | 
|  | seconds++; | 
|  | } | 
|  |  | 
|  | if (now.tv_sec > UINT64_MAX - seconds) { | 
|  | Stop(); | 
|  | return; | 
|  | } | 
|  | now.tv_sec += seconds; | 
|  | expire_time_ = now; | 
|  | } | 
|  |  | 
|  | void DTLSTimer::Stop() { expire_time_ = {0, 0}; } | 
|  |  | 
|  | bool DTLSTimer::IsExpired(OPENSSL_timeval now) const { | 
|  | return MicrosecondsRemaining(now) == 0; | 
|  | } | 
|  |  | 
|  | bool DTLSTimer::IsSet() const { | 
|  | return expire_time_.tv_sec != 0 || expire_time_.tv_usec != 0; | 
|  | } | 
|  |  | 
|  | uint64_t DTLSTimer::MicrosecondsRemaining(OPENSSL_timeval now) const { | 
|  | if (!IsSet()) { | 
|  | return kNever; | 
|  | } | 
|  |  | 
|  | if (now.tv_sec > expire_time_.tv_sec || | 
|  | (now.tv_sec == expire_time_.tv_sec && | 
|  | now.tv_usec >= expire_time_.tv_usec)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | uint64_t sec = expire_time_.tv_sec - now.tv_sec; | 
|  | uint32_t usec; | 
|  | if (expire_time_.tv_usec >= now.tv_usec) { | 
|  | usec = expire_time_.tv_usec - now.tv_usec; | 
|  | } else { | 
|  | sec--; | 
|  | usec = expire_time_.tv_usec + 1000000 - now.tv_usec; | 
|  | } | 
|  |  | 
|  | // If remaining time is less than 15 ms, return 0 to prevent issues because of | 
|  | // small divergences with socket timeouts. | 
|  | if (sec == 0 && usec < 15000) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (sec > UINT64_MAX / 1000000) { | 
|  | return kNever; | 
|  | } | 
|  | sec *= 1000000; | 
|  | if (sec > UINT64_MAX - usec) { | 
|  | return kNever; | 
|  | } | 
|  | return sec + usec; | 
|  | } | 
|  |  | 
|  | void dtls1_stop_timer(SSL *ssl) { | 
|  | ssl->d1->num_timeouts = 0; | 
|  | ssl->d1->retransmit_timer.Stop(); | 
|  | ssl->d1->timeout_duration_ms = ssl->initial_timeout_duration_ms; | 
|  | } | 
|  |  | 
|  | BSSL_NAMESPACE_END | 
|  |  | 
|  | using namespace bssl; | 
|  |  | 
|  | void DTLSv1_set_initial_timeout_duration(SSL *ssl, uint32_t duration_ms) { | 
|  | ssl->initial_timeout_duration_ms = duration_ms; | 
|  | } | 
|  |  | 
|  | int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out) { | 
|  | if (!SSL_is_dtls(ssl)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | OPENSSL_timeval now = ssl_ctx_get_current_time(ssl->ctx.get()); | 
|  | uint64_t remaining_usec = | 
|  | ssl->d1->retransmit_timer.MicrosecondsRemaining(now); | 
|  | remaining_usec = | 
|  | std::min(remaining_usec, ssl->d1->ack_timer.MicrosecondsRemaining(now)); | 
|  | if (remaining_usec == DTLSTimer::kNever) { | 
|  | return 0;  // No timeout is set. | 
|  | } | 
|  |  | 
|  | uint64_t remaining_sec = remaining_usec / 1000000; | 
|  | remaining_usec %= 1000000; | 
|  |  | 
|  | // |timeval| uses |time_t|, which may be 32-bit. | 
|  | const auto kTvSecMax = std::numeric_limits<decltype(out->tv_sec)>::max(); | 
|  | if (remaining_sec > static_cast<uint64_t>(kTvSecMax)) { | 
|  | out->tv_sec = kTvSecMax;  // Saturate the output. | 
|  | out->tv_usec = 999999; | 
|  | } else { | 
|  | out->tv_sec = static_cast<decltype(out->tv_sec)>(remaining_sec); | 
|  | } | 
|  | out->tv_usec = remaining_usec; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int DTLSv1_handle_timeout(SSL *ssl) { | 
|  | ssl_reset_error_state(ssl); | 
|  |  | 
|  | if (!SSL_is_dtls(ssl)) { | 
|  | OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (!ssl->d1->ack_timer.IsSet() && !ssl->d1->retransmit_timer.IsSet()) { | 
|  | // No timers are running. Don't bother querying the clock. | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | OPENSSL_timeval now = ssl_ctx_get_current_time(ssl->ctx.get()); | 
|  | bool any_timer_expired = false; | 
|  | if (ssl->d1->ack_timer.IsExpired(now)) { | 
|  | any_timer_expired = true; | 
|  | ssl->d1->sending_ack = true; | 
|  | ssl->d1->ack_timer.Stop(); | 
|  | } | 
|  |  | 
|  | if (ssl->d1->retransmit_timer.IsExpired(now)) { | 
|  | any_timer_expired = true; | 
|  | ssl->d1->sending_flight = true; | 
|  | ssl->d1->retransmit_timer.Stop(); | 
|  |  | 
|  | ssl->d1->num_timeouts++; | 
|  | // Reduce MTU after 2 unsuccessful retransmissions. | 
|  | if (ssl->d1->num_timeouts > DTLS1_MTU_TIMEOUTS && | 
|  | !(SSL_get_options(ssl) & SSL_OP_NO_QUERY_MTU)) { | 
|  | long mtu = BIO_ctrl(ssl->wbio.get(), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, | 
|  | nullptr); | 
|  | if (mtu >= 0 && mtu <= (1 << 30) && (unsigned)mtu >= dtls1_min_mtu()) { | 
|  | ssl->d1->mtu = (unsigned)mtu; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!any_timer_expired) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return dtls1_flush(ssl); | 
|  | } |