| // Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. | |
| // Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved. | |
| // Copyright 2005 Nokia. All rights reserved. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #include <openssl/ssl.h> | |
| #include <algorithm> | |
| #include <iterator> | |
| #include <utility> | |
| #include <assert.h> | |
| #include <limits.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <openssl/bytestring.h> | |
| #include <openssl/crypto.h> | |
| #include <openssl/err.h> | |
| #include <openssl/evp.h> | |
| #include <openssl/mem.h> | |
| #include <openssl/nid.h> | |
| #include <openssl/rand.h> | |
| #include "../crypto/bytestring/internal.h" | |
| #include "../crypto/internal.h" | |
| #include "internal.h" | |
| #if defined(OPENSSL_WINDOWS) | |
| #include <sys/timeb.h> | |
| #else | |
| #include <sys/socket.h> | |
| #include <sys/time.h> | |
| #endif | |
| BSSL_NAMESPACE_BEGIN | |
| static_assert(SSL3_RT_MAX_ENCRYPTED_OVERHEAD >= | |
| SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD, | |
| "max overheads are inconsistent"); | |
| // `SSL_R_UNKNOWN_PROTOCOL` is no longer emitted, but continue to define it | |
| // to avoid downstream churn. | |
| OPENSSL_DECLARE_ERROR_REASON(SSL, UNKNOWN_PROTOCOL) | |
| // The following errors are no longer emitted, but are used in nginx without | |
| // #ifdefs. | |
| OPENSSL_DECLARE_ERROR_REASON(SSL, BLOCK_CIPHER_PAD_IS_WRONG) | |
| OPENSSL_DECLARE_ERROR_REASON(SSL, NO_CIPHERS_SPECIFIED) | |
| // Some error codes are special. Ensure the make_errors.go script never | |
| // regresses this. | |
| static_assert(SSL_R_TLSV1_ALERT_NO_RENEGOTIATION == | |
| SSL_AD_NO_RENEGOTIATION + SSL_AD_REASON_OFFSET, | |
| "alert reason code mismatch"); | |
| // kMaxHandshakeSize is the maximum size, in bytes, of a handshake message. | |
| static const size_t kMaxHandshakeSize = (1u << 24) - 1; | |
| static ExDataClass g_ex_data_class_ssl(/*with_app_data=*/true); | |
| static ExDataClass g_ex_data_class_ssl_ctx(/*with_app_data=*/true); | |
| void ssl_reset_error_state(SSLImpl *ssl) { | |
| // Functions which use `SSL_get_error` must reset I/O and error state on | |
| // entry. | |
| ssl->s3->rwstate = SSL_ERROR_NONE; | |
| ERR_clear_error(); | |
| ERR_clear_system_error(); | |
| } | |
| void ssl_set_read_error(SSLImpl *ssl) { | |
| ssl->s3->read_shutdown = ssl_shutdown_error; | |
| ssl->s3->read_error.reset(ERR_save_state()); | |
| } | |
| static bool check_read_error(const SSLImpl *ssl) { | |
| if (ssl->s3->read_shutdown == ssl_shutdown_error) { | |
| ERR_restore_state(ssl->s3->read_error.get()); | |
| return false; | |
| } | |
| return true; | |
| } | |
| bool ssl_can_write(const SSLImpl *ssl) { | |
| return !SSL_in_init(ssl) || ssl->s3->hs->can_early_write; | |
| } | |
| bool ssl_can_read(const SSLImpl *ssl) { | |
| return !SSL_in_init(ssl) || ssl->s3->hs->can_early_read; | |
| } | |
| ssl_open_record_t ssl_open_handshake(SSLImpl *ssl, size_t *out_consumed, | |
| uint8_t *out_alert, Span<uint8_t> in) { | |
| *out_consumed = 0; | |
| if (!check_read_error(ssl)) { | |
| *out_alert = 0; | |
| return ssl_open_record_error; | |
| } | |
| auto ret = ssl->method->open_handshake(ssl, out_consumed, out_alert, in); | |
| if (ret == ssl_open_record_error) { | |
| ssl_set_read_error(ssl); | |
| } | |
| return ret; | |
| } | |
| ssl_open_record_t ssl_open_change_cipher_spec(SSLImpl *ssl, | |
| size_t *out_consumed, | |
| uint8_t *out_alert, | |
| Span<uint8_t> in) { | |
| *out_consumed = 0; | |
| if (!check_read_error(ssl)) { | |
| *out_alert = 0; | |
| return ssl_open_record_error; | |
| } | |
| auto ret = | |
| ssl->method->open_change_cipher_spec(ssl, out_consumed, out_alert, in); | |
| if (ret == ssl_open_record_error) { | |
| ssl_set_read_error(ssl); | |
| } | |
| return ret; | |
| } | |
| ssl_open_record_t ssl_open_app_data(SSLImpl *ssl, Span<uint8_t> *out, | |
| size_t *out_consumed, uint8_t *out_alert, | |
| Span<uint8_t> in) { | |
| *out_consumed = 0; | |
| if (!check_read_error(ssl)) { | |
| *out_alert = 0; | |
| return ssl_open_record_error; | |
| } | |
| auto ret = ssl->method->open_app_data(ssl, out, out_consumed, out_alert, in); | |
| if (ret == ssl_open_record_error) { | |
| ssl_set_read_error(ssl); | |
| } | |
| return ret; | |
| } | |
| static uint8_t hex_char_consttime(uint8_t b) { | |
| declassify_assert(b < 16); | |
| return constant_time_select_8(constant_time_lt_8(b, 10), b + '0', | |
| b - 10 + 'a'); | |
| } | |
| static bool cbb_add_hex_consttime(CBB *cbb, Span<const uint8_t> in) { | |
| uint8_t *out; | |
| if (!CBB_add_space(cbb, &out, in.size() * 2)) { | |
| return false; | |
| } | |
| for (uint8_t b : in) { | |
| *(out++) = hex_char_consttime(b >> 4); | |
| *(out++) = hex_char_consttime(b & 0xf); | |
| } | |
| return true; | |
| } | |
| bool ssl_log_secret(const SSLImpl *ssl, const char *label, | |
| Span<const uint8_t> secret) { | |
| if (ssl->ctx->keylog_callback == nullptr) { | |
| return true; | |
| } | |
| ScopedCBB cbb; | |
| Array<uint8_t> line; | |
| auto label_bytes = bssl::StringAsBytes(label); | |
| if (!CBB_init(cbb.get(), strlen(label) + 1 + SSL3_RANDOM_SIZE * 2 + 1 + | |
| secret.size() * 2 + 1) || | |
| !CBB_add_bytes(cbb.get(), label_bytes.data(), label_bytes.size()) || | |
| !CBB_add_u8(cbb.get(), ' ') || | |
| !cbb_add_hex_consttime(cbb.get(), ssl->s3->client_random) || | |
| !CBB_add_u8(cbb.get(), ' ') || | |
| // Convert to hex in constant time to avoid leaking `secret`. If the | |
| // callback discards the data, we should not introduce side channels. | |
| !cbb_add_hex_consttime(cbb.get(), secret) || | |
| !CBB_add_u8(cbb.get(), 0 /* NUL */) || | |
| !CBBFinishArray(cbb.get(), &line)) { | |
| return false; | |
| } | |
| ssl->ctx->keylog_callback(ssl, reinterpret_cast<const char *>(line.data())); | |
| return true; | |
| } | |
| void ssl_do_info_callback(const SSLImpl *ssl, int type, int value) { | |
| void (*cb)(const SSL *ssl, int type, int value) = nullptr; | |
| if (ssl->info_callback != nullptr) { | |
| cb = ssl->info_callback; | |
| } else if (ssl->ctx->info_callback != nullptr) { | |
| cb = ssl->ctx->info_callback; | |
| } | |
| if (cb != nullptr) { | |
| cb(ssl, type, value); | |
| } | |
| } | |
| void ssl_do_msg_callback(const SSLImpl *ssl, int is_write, int content_type, | |
| Span<const uint8_t> in) { | |
| if (ssl->msg_callback == nullptr) { | |
| return; | |
| } | |
| // `version` is zero when calling for `SSL3_RT_HEADER` and `SSL2_VERSION` for | |
| // a V2ClientHello. | |
| int version; | |
| switch (content_type) { | |
| case 0: | |
| // V2ClientHello | |
| version = SSL2_VERSION; | |
| break; | |
| case SSL3_RT_HEADER: | |
| version = 0; | |
| break; | |
| default: | |
| version = SSL_version(ssl); | |
| } | |
| ssl->msg_callback(is_write, version, content_type, in.data(), in.size(), | |
| const_cast<SSLImpl *>(ssl), ssl->msg_callback_arg); | |
| } | |
| OPENSSL_timeval ssl_ctx_get_current_time(const SSLContext *ctx) { | |
| if (ctx->current_time_cb != nullptr) { | |
| // TODO(davidben): Update current_time_cb to use OPENSSL_timeval. See | |
| // https://crbug.com/boringssl/155. | |
| struct timeval clock; | |
| ctx->current_time_cb(nullptr /* ssl */, &clock); | |
| if (clock.tv_sec < 0) { | |
| assert(0); | |
| return {0, 0}; | |
| } else { | |
| return {static_cast<uint64_t>(clock.tv_sec), | |
| static_cast<uint32_t>(clock.tv_usec)}; | |
| } | |
| } | |
| #if defined(OPENSSL_WINDOWS) | |
| struct _timeb time; | |
| _ftime(&time); | |
| if (time.time < 0) { | |
| assert(0); | |
| return {0, 0}; | |
| } else { | |
| return {static_cast<uint64_t>(time.time), | |
| static_cast<uint32_t>(time.millitm * 1000)}; | |
| } | |
| #else | |
| struct timeval clock; | |
| gettimeofday(&clock, nullptr); | |
| if (clock.tv_sec < 0) { | |
| assert(0); | |
| return {0, 0}; | |
| } else { | |
| return {static_cast<uint64_t>(clock.tv_sec), | |
| static_cast<uint32_t>(clock.tv_usec)}; | |
| } | |
| #endif | |
| } | |
| static bool ssl_can_renegotiate(const SSLImpl *ssl) { | |
| if (ssl->server || SSL_is_dtls(ssl)) { | |
| return false; | |
| } | |
| if (ssl->s3->version != 0 // | |
| && ssl_protocol_version(ssl) >= TLS1_3_VERSION) { | |
| return false; | |
| } | |
| // The config has already been shed. | |
| if (!ssl->config) { | |
| return false; | |
| } | |
| switch (ssl->renegotiate_mode) { | |
| case ssl_renegotiate_ignore: | |
| case ssl_renegotiate_never: | |
| return false; | |
| case ssl_renegotiate_freely: | |
| case ssl_renegotiate_explicit: | |
| return true; | |
| case ssl_renegotiate_once: | |
| return ssl->s3->total_renegotiations == 0; | |
| } | |
| assert(0); | |
| return false; | |
| } | |
| static void ssl_maybe_shed_handshake_config(SSLImpl *ssl) { | |
| if (ssl->s3->hs != nullptr || // | |
| ssl->config == nullptr || // | |
| !ssl->config->shed_handshake_config || // | |
| ssl_can_renegotiate(ssl)) { | |
| return; | |
| } | |
| ssl->config.reset(); | |
| } | |
| bool SSL_get_traffic_secrets(const SSL *ssl, | |
| Span<const uint8_t> *out_read_traffic_secret, | |
| Span<const uint8_t> *out_write_traffic_secret) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // This API is not well-defined for DTLS, where multiple epochs may be alive | |
| // at once. Callers should use `SSL_get_dtls_*_traffic_secret` instead. In | |
| // QUIC, the application is already handed the traffic secret. | |
| if (SSL_is_dtls(ssl_impl) || SSL_is_quic(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return false; | |
| } | |
| if (!ssl_impl->s3->initial_handshake_complete) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_HANDSHAKE_NOT_COMPLETE); | |
| return false; | |
| } | |
| if (SSL_version(ssl_impl) < TLS1_3_VERSION) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_WRONG_SSL_VERSION); | |
| return false; | |
| } | |
| *out_read_traffic_secret = ssl_impl->s3->read_traffic_secret; | |
| *out_write_traffic_secret = ssl_impl->s3->write_traffic_secret; | |
| return true; | |
| } | |
| BSSL_NAMESPACE_END | |
| using namespace bssl; | |
| int SSL_library_init() { return 1; } | |
| int OPENSSL_init_ssl(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings) { | |
| return 1; | |
| } | |
| // TODO(crbug.com/565766495): Take `SSLSession` when the lhash does. | |
| static uint32_t ssl_session_hash(const SSL_SESSION *sess) { | |
| return ssl_hash_session_id(FromOpaque(sess)->session_id); | |
| } | |
| // TODO(crbug.com/565766495): Take `SSLSession` when the lhash does. | |
| static int ssl_session_cmp(const SSL_SESSION *a, const SSL_SESSION *b) { | |
| return Span(FromOpaque(a)->session_id) == FromOpaque(b)->session_id ? 0 : 1; | |
| } | |
| bssl::SSLContext::SSLContext(const SSL_METHOD *ssl_method) | |
| : RefCounted(CheckSubClass()), | |
| method(ssl_method->method), | |
| x509_method(ssl_method->x509_method), | |
| retain_only_sha256_of_client_certs(false), | |
| quiet_shutdown(false), | |
| ocsp_stapling_enabled(false), | |
| signed_cert_timestamps_enabled(false), | |
| channel_id_enabled(false), | |
| grease_enabled(false), | |
| grease_sigalgs_enabled(false), | |
| permute_extensions(false), | |
| allow_unknown_alpn_protos(false), | |
| false_start_allowed_without_alpn(false), | |
| enable_early_data(false), | |
| resumption_across_names_enabled(false) { | |
| CRYPTO_new_ex_data(&ex_data); | |
| } | |
| bssl::SSLContext::~SSLContext() { | |
| // Free the internal session cache. Note that this calls the caller-supplied | |
| // remove callback, so we must do it before clearing ex_data. (See ticket | |
| // [openssl.org #212].) | |
| SSL_CTX_flush_sessions(this, 0); | |
| CRYPTO_free_ex_data(&g_ex_data_class_ssl_ctx, &ex_data); | |
| lh_SSL_SESSION_free(sessions); | |
| x509_method->ssl_ctx_free(this); | |
| } | |
| SSL_CTX *SSL_CTX_new(const SSL_METHOD *method) { | |
| if (method == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NULL_SSL_METHOD_PASSED); | |
| return nullptr; | |
| } | |
| UniquePtr<SSLContext> ret = MakeUnique<SSLContext>(method); | |
| if (!ret) { | |
| return nullptr; | |
| } | |
| ret->cert = MakeUnique<CERT>(method->x509_method); | |
| ret->sessions = lh_SSL_SESSION_new(ssl_session_hash, ssl_session_cmp); | |
| ret->client_CA.reset(sk_CRYPTO_BUFFER_new_null()); | |
| ret->CA_names.reset(sk_CRYPTO_BUFFER_new_null()); | |
| if (ret->cert == nullptr || // | |
| !ret->cert->is_valid() || // | |
| ret->sessions == nullptr || // | |
| ret->client_CA == nullptr || // | |
| ret->CA_names == nullptr || // | |
| !ret->x509_method->ssl_ctx_new(ret.get())) { | |
| return nullptr; | |
| } | |
| if (!SSL_CTX_set_strict_cipher_list(ret.get(), SSL_DEFAULT_CIPHER_LIST) || | |
| !ssl_create_default_tls13_cipher_list(&ret->tls13_cipher_list) || | |
| // Lock the SSL_CTX to the specified version, for compatibility with | |
| // legacy uses of SSL_METHOD. | |
| !SSL_CTX_set_max_proto_version(ret.get(), method->version) || | |
| !SSL_CTX_set_min_proto_version(ret.get(), method->version)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | |
| return nullptr; | |
| } | |
| if (!ret->supported_group_list.CopyFrom(DefaultSupportedGroupIds())) { | |
| return nullptr; | |
| } | |
| if (!ret->supported_group_list_flags.Init(ret->supported_group_list.size())) { | |
| return nullptr; | |
| } | |
| ret->accepted_peer_cert_types.PushBack(kDefaultCertType); | |
| return ret.release(); | |
| } | |
| int SSL_CTX_up_ref(SSL_CTX *ctx) { | |
| FromOpaque(ctx)->UpRefInternal(); | |
| return 1; | |
| } | |
| void SSL_CTX_free(SSL_CTX *ctx) { | |
| if (ctx != nullptr) { | |
| FromOpaque(ctx)->DecRefInternal(); | |
| } | |
| } | |
| bssl::SSLImpl::SSLImpl(SSLContext *ctx_arg) | |
| : method(ctx_arg->method), | |
| max_send_fragment(ctx_arg->max_send_fragment), | |
| msg_callback(ctx_arg->msg_callback), | |
| msg_callback_arg(ctx_arg->msg_callback_arg), | |
| ctx(UpRef(ctx_arg)), | |
| session_ctx(UpRef(ctx_arg)), | |
| options(ctx->options), | |
| mode(ctx->mode), | |
| max_cert_list(ctx->max_cert_list), | |
| server(false), | |
| quiet_shutdown(ctx->quiet_shutdown), | |
| enable_early_data(ctx->enable_early_data), | |
| resumption_across_names_enabled(ctx->resumption_across_names_enabled) { | |
| CRYPTO_new_ex_data(&ex_data); | |
| } | |
| bssl::SSLImpl::~SSLImpl() { | |
| CRYPTO_free_ex_data(&g_ex_data_class_ssl, &ex_data); | |
| // `config` refers to `this`, so we must release it earlier. | |
| config.reset(); | |
| if (method != nullptr) { | |
| method->ssl_free(this); | |
| } | |
| } | |
| SSL *SSL_new(SSL_CTX *ctx) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| if (ctx_impl == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NULL_SSL_CTX); | |
| return nullptr; | |
| } | |
| UniquePtr<SSLImpl> ssl = MakeUnique<SSLImpl>(ctx_impl); | |
| if (ssl == nullptr) { | |
| return nullptr; | |
| } | |
| ssl->config = MakeUnique<SSL_CONFIG>(ssl.get()); | |
| if (ssl->config == nullptr) { | |
| return nullptr; | |
| } | |
| ssl->config->conf_min_version = ctx_impl->conf_min_version; | |
| ssl->config->conf_max_version = ctx_impl->conf_max_version; | |
| ssl->config->cert = ssl_cert_dup(ctx_impl->cert.get()); | |
| if (ssl->config->cert == nullptr) { | |
| return nullptr; | |
| } | |
| ssl->config->verify_mode = ctx_impl->verify_mode; | |
| ssl->config->verify_callback = ctx_impl->default_verify_callback; | |
| ssl->config->custom_verify_callback = ctx_impl->custom_verify_callback; | |
| ssl->config->retain_only_sha256_of_client_certs = | |
| ctx_impl->retain_only_sha256_of_client_certs; | |
| ssl->config->permute_extensions = ctx_impl->permute_extensions; | |
| ssl->config->compliance_policy = ctx_impl->compliance_policy; | |
| if (!ssl->config->tls13_cipher_list.CopyFrom(ctx_impl->tls13_cipher_list)) { | |
| return nullptr; | |
| } | |
| if (!ssl->config->supported_group_list.CopyFrom( | |
| ctx_impl->supported_group_list) || | |
| !ssl->config->supported_group_list_flags.CopyFrom( | |
| ctx_impl->supported_group_list_flags) || | |
| !ssl->config->alpn_client_proto_list.CopyFrom( | |
| ctx_impl->alpn_client_proto_list) || | |
| !ssl->config->verify_sigalgs.CopyFrom(ctx_impl->verify_sigalgs) || | |
| !ssl->config->accepted_peer_cert_types.TryCopyFrom( | |
| ctx_impl->accepted_peer_cert_types) || | |
| !ssl->config->available_client_cert_types.TryCopyFrom( | |
| ctx_impl->available_client_cert_types)) { | |
| return nullptr; | |
| } | |
| if (ctx_impl->requested_trust_anchors) { | |
| ssl->config->requested_trust_anchors.emplace(); | |
| if (!ssl->config->requested_trust_anchors->CopyFrom( | |
| *ctx_impl->requested_trust_anchors)) { | |
| return nullptr; | |
| } | |
| } | |
| if (ctx_impl->psk_identity_hint) { | |
| ssl->config->psk_identity_hint.reset( | |
| OPENSSL_strdup(ctx_impl->psk_identity_hint.get())); | |
| if (ssl->config->psk_identity_hint == nullptr) { | |
| return nullptr; | |
| } | |
| } | |
| ssl->config->psk_client_callback = ctx_impl->psk_client_callback; | |
| ssl->config->psk_server_callback = ctx_impl->psk_server_callback; | |
| ssl->config->channel_id_enabled = ctx_impl->channel_id_enabled; | |
| ssl->config->channel_id_private = UpRef(ctx_impl->channel_id_private); | |
| ssl->config->signed_cert_timestamps_enabled = | |
| ctx_impl->signed_cert_timestamps_enabled; | |
| ssl->config->ocsp_stapling_enabled = ctx_impl->ocsp_stapling_enabled; | |
| ssl->quic_method = ctx_impl->quic_method; | |
| if (!ssl->method->ssl_new(ssl.get()) || | |
| !ssl->ctx->x509_method->ssl_new(ssl->s3->hs.get())) { | |
| return nullptr; | |
| } | |
| return ssl.release(); | |
| } | |
| SSL_CONFIG::SSL_CONFIG(SSLImpl *ssl_arg) | |
| : ssl(ssl_arg), | |
| ech_grease_enabled(false), | |
| reject_unusable_ech_config(false), | |
| signed_cert_timestamps_enabled(false), | |
| ocsp_stapling_enabled(false), | |
| channel_id_enabled(false), | |
| retain_only_sha256_of_client_certs(false), | |
| shed_handshake_config(false), | |
| jdk11_workaround(false), | |
| quic_use_legacy_codepoint(false), | |
| permute_extensions(false), | |
| alps_use_new_codepoint(true), | |
| server_padding_enabled(false) { | |
| assert(ssl); | |
| } | |
| SSL_CONFIG::~SSL_CONFIG() { | |
| if (ssl->ctx != nullptr) { | |
| ssl->ctx->x509_method->ssl_config_free(this); | |
| } | |
| } | |
| void SSL_free(SSL *ssl) { Delete(FromOpaque(ssl)); } | |
| void SSL_set_connect_state(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->server = false; | |
| ssl_impl->do_handshake = ssl_client_handshake; | |
| } | |
| void SSL_set_accept_state(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->server = true; | |
| ssl_impl->do_handshake = ssl_server_handshake; | |
| } | |
| void SSL_set0_rbio(SSL *ssl, BIO *rbio) { FromOpaque(ssl)->rbio.reset(rbio); } | |
| void SSL_set0_wbio(SSL *ssl, BIO *wbio) { FromOpaque(ssl)->wbio.reset(wbio); } | |
| void SSL_set_bio(SSL *ssl, BIO *rbio, BIO *wbio) { | |
| // For historical reasons, this function has many different cases in ownership | |
| // handling. | |
| // If nothing has changed, do nothing | |
| if (rbio == SSL_get_rbio(ssl) && wbio == SSL_get_wbio(ssl)) { | |
| return; | |
| } | |
| // If the two arguments are equal, one fewer reference is granted than | |
| // taken. | |
| if (rbio != nullptr && rbio == wbio) { | |
| BIO_up_ref(rbio); | |
| } | |
| // If only the wbio is changed, adopt only one reference. | |
| if (rbio == SSL_get_rbio(ssl)) { | |
| SSL_set0_wbio(ssl, wbio); | |
| return; | |
| } | |
| // There is an asymmetry here for historical reasons. If only the rbio is | |
| // changed AND the rbio and wbio were originally different, then we only adopt | |
| // one reference. | |
| if (wbio == SSL_get_wbio(ssl) && SSL_get_rbio(ssl) != SSL_get_wbio(ssl)) { | |
| SSL_set0_rbio(ssl, rbio); | |
| return; | |
| } | |
| // Otherwise, adopt both references. | |
| SSL_set0_rbio(ssl, rbio); | |
| SSL_set0_wbio(ssl, wbio); | |
| } | |
| BIO *SSL_get_rbio(const SSL *ssl) { return FromOpaque(ssl)->rbio.get(); } | |
| BIO *SSL_get_wbio(const SSL *ssl) { return FromOpaque(ssl)->wbio.get(); } | |
| size_t SSL_quic_max_handshake_flight_len(const SSL *ssl, | |
| enum ssl_encryption_level_t level) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // Limits flights to 16K by default when there are no large | |
| // (certificate-carrying) messages. | |
| static const size_t kDefaultLimit = 16384; | |
| switch (level) { | |
| case ssl_encryption_initial: | |
| return kDefaultLimit; | |
| case ssl_encryption_early_data: | |
| // QUIC does not send EndOfEarlyData. | |
| return 0; | |
| case ssl_encryption_handshake: | |
| if (ssl_impl->server) { | |
| // Servers may receive Certificate message if configured to request | |
| // client certificates. | |
| if (!!(ssl_impl->config->verify_mode & SSL_VERIFY_PEER) && | |
| ssl_impl->max_cert_list > kDefaultLimit) { | |
| return ssl_impl->max_cert_list; | |
| } | |
| } else { | |
| // Clients may receive both Certificate message and a CertificateRequest | |
| // message. | |
| if (2 * ssl_impl->max_cert_list > kDefaultLimit) { | |
| return 2 * ssl_impl->max_cert_list; | |
| } | |
| } | |
| return kDefaultLimit; | |
| case ssl_encryption_application: | |
| // Note there is not actually a bound on the number of NewSessionTickets | |
| // one may send in a row. This level may need more involved flow | |
| // control. See https://github.com/quicwg/base-drafts/issues/1834. | |
| return kDefaultLimit; | |
| } | |
| return 0; | |
| } | |
| enum ssl_encryption_level_t SSL_quic_read_level(const SSL *ssl) { | |
| assert(SSL_is_quic(ssl)); | |
| return FromOpaque(ssl)->s3->quic_read_level; | |
| } | |
| enum ssl_encryption_level_t SSL_quic_write_level(const SSL *ssl) { | |
| assert(SSL_is_quic(ssl)); | |
| return FromOpaque(ssl)->s3->quic_write_level; | |
| } | |
| int SSL_provide_quic_data(SSL *ssl, enum ssl_encryption_level_t level, | |
| const uint8_t *data, size_t len) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!SSL_is_quic(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return 0; | |
| } | |
| if (level != ssl_impl->s3->quic_read_level) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_WRONG_ENCRYPTION_LEVEL_RECEIVED); | |
| return 0; | |
| } | |
| size_t new_len = | |
| (ssl_impl->s3->hs_buf ? ssl_impl->s3->hs_buf->length : 0) + len; | |
| if (new_len < len || | |
| new_len > SSL_quic_max_handshake_flight_len(ssl_impl, level)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_EXCESSIVE_MESSAGE_SIZE); | |
| return 0; | |
| } | |
| return tls_append_handshake_data(ssl_impl, Span(data, len)); | |
| } | |
| int SSL_do_handshake(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_reset_error_state(ssl_impl); | |
| if (ssl_impl->do_handshake == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_CONNECTION_TYPE_NOT_SET); | |
| return -1; | |
| } | |
| if (!SSL_in_init(ssl_impl)) { | |
| return 1; | |
| } | |
| // Run the handshake. | |
| SSL_HANDSHAKE *hs = ssl_impl->s3->hs.get(); | |
| bool early_return = false; | |
| int ret = ssl_run_handshake(hs, &early_return); | |
| ssl_do_info_callback( | |
| ssl_impl, ssl_impl->server ? SSL_CB_ACCEPT_EXIT : SSL_CB_CONNECT_EXIT, | |
| ret); | |
| if (ret <= 0) { | |
| return ret; | |
| } | |
| // Destroy the handshake object if the handshake has completely finished. | |
| if (!early_return) { | |
| ssl_impl->s3->hs.reset(); | |
| ssl_maybe_shed_handshake_config(ssl_impl); | |
| } | |
| return 1; | |
| } | |
| int SSL_connect(SSL *ssl) { | |
| if (FromOpaque(ssl)->do_handshake == nullptr) { | |
| // Not properly initialized yet | |
| SSL_set_connect_state(ssl); | |
| } | |
| return SSL_do_handshake(ssl); | |
| } | |
| int SSL_accept(SSL *ssl) { | |
| if (FromOpaque(ssl)->do_handshake == nullptr) { | |
| // Not properly initialized yet | |
| SSL_set_accept_state(ssl); | |
| } | |
| return SSL_do_handshake(ssl); | |
| } | |
| static int ssl_do_post_handshake(SSLImpl *ssl, const SSLMessage &msg) { | |
| if (ssl_protocol_version(ssl) >= TLS1_3_VERSION) { | |
| return tls13_post_handshake(ssl, msg); | |
| } | |
| // Check for renegotiation on the server before parsing to use the correct | |
| // error. Renegotiation is triggered by a different message for servers. | |
| if (ssl->server) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NO_RENEGOTIATION); | |
| ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_NO_RENEGOTIATION); | |
| return 0; | |
| } | |
| if (msg.type != SSL3_MT_HELLO_REQUEST || CBS_len(&msg.body) != 0) { | |
| ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_DECODE_ERROR); | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_HELLO_REQUEST); | |
| return 0; | |
| } | |
| if (ssl->renegotiate_mode == ssl_renegotiate_ignore) { | |
| return 1; // Ignore the HelloRequest. | |
| } | |
| ssl->s3->renegotiate_pending = true; | |
| if (ssl->renegotiate_mode == ssl_renegotiate_explicit) { | |
| return 1; // Handle it later. | |
| } | |
| if (!SSL_renegotiate(ssl)) { | |
| ssl_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_NO_RENEGOTIATION); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| int SSL_process_quic_post_handshake(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_reset_error_state(ssl_impl); | |
| if (!SSL_is_quic(ssl_impl) || SSL_in_init(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return 0; | |
| } | |
| // Replay post-handshake message errors. | |
| if (!check_read_error(ssl_impl)) { | |
| return 0; | |
| } | |
| // Process any buffered post-handshake messages. | |
| SSLMessage msg; | |
| while (ssl_impl->method->get_message(ssl_impl, &msg)) { | |
| // Handle the post-handshake message and try again. | |
| if (!ssl_do_post_handshake(ssl_impl, msg)) { | |
| ssl_set_read_error(ssl_impl); | |
| return 0; | |
| } | |
| ssl_impl->method->next_message(ssl_impl); | |
| } | |
| return 1; | |
| } | |
| static int ssl_read_impl(SSLImpl *ssl) { | |
| ssl_reset_error_state(ssl); | |
| if (ssl->do_handshake == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNINITIALIZED); | |
| return -1; | |
| } | |
| // Replay post-handshake message errors. | |
| if (!check_read_error(ssl)) { | |
| return -1; | |
| } | |
| while (ssl->s3->pending_app_data.empty()) { | |
| if (ssl->s3->renegotiate_pending) { | |
| ssl->s3->rwstate = SSL_ERROR_WANT_RENEGOTIATE; | |
| return -1; | |
| } | |
| // If a read triggered a DTLS ACK or retransmit, resolve that before reading | |
| // more. | |
| if (SSL_is_dtls(ssl)) { | |
| int ret = ssl->method->flush(ssl); | |
| if (ret <= 0) { | |
| return ret; | |
| } | |
| } | |
| // Complete the current handshake, if any. False Start will cause | |
| // `SSL_do_handshake` to return mid-handshake, so this may require multiple | |
| // iterations. | |
| while (!ssl_can_read(ssl)) { | |
| int ret = SSL_do_handshake(ssl); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| if (ret == 0) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_SSL_HANDSHAKE_FAILURE); | |
| return -1; | |
| } | |
| } | |
| // Process any buffered post-handshake messages. | |
| SSLMessage msg; | |
| if (ssl->method->get_message(ssl, &msg)) { | |
| // If we received an interrupt in early read (EndOfEarlyData), loop again | |
| // for the handshake to process it. | |
| if (SSL_in_init(ssl)) { | |
| ssl->s3->hs->can_early_read = false; | |
| continue; | |
| } | |
| // Handle the post-handshake message and try again. | |
| if (!ssl_do_post_handshake(ssl, msg)) { | |
| ssl_set_read_error(ssl); | |
| return -1; | |
| } | |
| ssl->method->next_message(ssl); | |
| continue; // Loop again. We may have begun a new handshake. | |
| } | |
| uint8_t alert = SSL_AD_DECODE_ERROR; | |
| size_t consumed = 0; | |
| auto ret = ssl_open_app_data(ssl, &ssl->s3->pending_app_data, &consumed, | |
| &alert, ssl->s3->read_buffer.span()); | |
| bool retry; | |
| int bio_ret = ssl_handle_open_record(ssl, &retry, ret, consumed, alert); | |
| if (bio_ret <= 0) { | |
| return bio_ret; | |
| } | |
| if (!retry) { | |
| assert(!ssl->s3->pending_app_data.empty()); | |
| ssl->s3->key_update_count = 0; | |
| } | |
| } | |
| return 1; | |
| } | |
| int SSL_read(SSL *ssl, void *buf, int num) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| int ret = SSL_peek(ssl_impl, buf, num); | |
| if (ret <= 0) { | |
| return ret; | |
| } | |
| // TODO(davidben): In DTLS, should the rest of the record be discarded? DTLS | |
| // is not a stream. See https://crbug.com/boringssl/65. | |
| ssl_impl->s3->pending_app_data = | |
| ssl_impl->s3->pending_app_data.subspan(static_cast<size_t>(ret)); | |
| if (ssl_impl->s3->pending_app_data.empty()) { | |
| ssl_impl->s3->read_buffer.DiscardConsumed(); | |
| } | |
| return ret; | |
| } | |
| int SSL_peek(SSL *ssl, void *buf, int num) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (SSL_is_quic(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return -1; | |
| } | |
| int ret = ssl_read_impl(ssl_impl); | |
| if (ret <= 0) { | |
| return ret; | |
| } | |
| if (num <= 0) { | |
| return num; | |
| } | |
| size_t todo = | |
| std::min(ssl_impl->s3->pending_app_data.size(), static_cast<size_t>(num)); | |
| OPENSSL_memcpy(buf, ssl_impl->s3->pending_app_data.data(), todo); | |
| return static_cast<int>(todo); | |
| } | |
| int SSL_write(SSL *ssl, const void *buf, int num) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_reset_error_state(ssl_impl); | |
| if (SSL_is_quic(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return -1; | |
| } | |
| if (ssl_impl->do_handshake == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNINITIALIZED); | |
| return -1; | |
| } | |
| int ret = 0; | |
| size_t bytes_written = 0; | |
| bool needs_handshake = false; | |
| do { | |
| // If necessary, complete the handshake implicitly. | |
| if (!ssl_can_write(ssl_impl)) { | |
| ret = SSL_do_handshake(ssl_impl); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| if (ret == 0) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_SSL_HANDSHAKE_FAILURE); | |
| return -1; | |
| } | |
| } | |
| if (num < 0) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_LENGTH); | |
| return -1; | |
| } | |
| ret = ssl_impl->method->write_app_data( | |
| ssl_impl, &needs_handshake, &bytes_written, | |
| Span(static_cast<const uint8_t *>(buf), static_cast<size_t>(num))); | |
| } while (needs_handshake); | |
| return ret <= 0 ? ret : static_cast<int>(bytes_written); | |
| } | |
| int SSL_key_update(SSL *ssl, int request_type) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_reset_error_state(ssl_impl); | |
| if (ssl_impl->do_handshake == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNINITIALIZED); | |
| return 0; | |
| } | |
| if (SSL_is_quic(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return 0; | |
| } | |
| if (!ssl_impl->s3->initial_handshake_complete) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_HANDSHAKE_NOT_COMPLETE); | |
| return 0; | |
| } | |
| if (ssl_protocol_version(ssl_impl) < TLS1_3_VERSION) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_WRONG_SSL_VERSION); | |
| return 0; | |
| } | |
| return tls13_add_key_update(ssl_impl, request_type); | |
| } | |
| int SSL_shutdown(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_reset_error_state(ssl_impl); | |
| if (ssl_impl->do_handshake == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNINITIALIZED); | |
| return -1; | |
| } | |
| // If we are in the middle of a handshake, silently succeed. Consumers often | |
| // call this function before `SSL_free`, whether the handshake succeeded or | |
| // not. We assume the caller has already handled failed handshakes. | |
| if (SSL_in_init(ssl_impl)) { | |
| return 1; | |
| } | |
| if (ssl_impl->quiet_shutdown) { | |
| // Do nothing if configured not to send a close_notify. | |
| ssl_impl->s3->write_shutdown = ssl_shutdown_close_notify; | |
| ssl_impl->s3->read_shutdown = ssl_shutdown_close_notify; | |
| return 1; | |
| } | |
| // This function completes in two stages. It sends a close_notify and then it | |
| // waits for a close_notify to come in. Perform exactly one action and return | |
| // whether or not it succeeds. | |
| if (ssl_impl->s3->write_shutdown != ssl_shutdown_close_notify) { | |
| // Send a close_notify. | |
| if (ssl_send_alert_impl(ssl_impl, SSL3_AL_WARNING, SSL_AD_CLOSE_NOTIFY) <= | |
| 0) { | |
| return -1; | |
| } | |
| } else if (ssl_impl->s3->alert_dispatch) { | |
| // Finish sending the close_notify. | |
| if (ssl_impl->method->dispatch_alert(ssl_impl) <= 0) { | |
| return -1; | |
| } | |
| } else if (ssl_impl->s3->read_shutdown != ssl_shutdown_close_notify) { | |
| if (SSL_is_dtls(ssl_impl)) { | |
| // Bidirectional shutdown doesn't make sense for an unordered | |
| // transport. DTLS alerts also aren't delivered reliably, so we may even | |
| // time out because the peer never received our close_notify. Report to | |
| // the caller that the channel has fully shut down. | |
| if (ssl_impl->s3->read_shutdown == ssl_shutdown_error) { | |
| ERR_restore_state(ssl_impl->s3->read_error.get()); | |
| return -1; | |
| } | |
| ssl_impl->s3->read_shutdown = ssl_shutdown_close_notify; | |
| } else { | |
| // Process records until an error, close_notify, or application data. | |
| if (ssl_read_impl(ssl_impl) > 0) { | |
| // We received some unexpected application data. | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_APPLICATION_DATA_ON_SHUTDOWN); | |
| return -1; | |
| } | |
| if (ssl_impl->s3->read_shutdown != ssl_shutdown_close_notify) { | |
| return -1; | |
| } | |
| } | |
| } | |
| // Return 0 for unidirectional shutdown and 1 for bidirectional shutdown. | |
| return ssl_impl->s3->read_shutdown == ssl_shutdown_close_notify; | |
| } | |
| int SSL_send_fatal_alert(SSL *ssl, uint8_t alert) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->s3->alert_dispatch) { | |
| if (ssl_impl->s3->send_alert[0] != SSL3_AL_FATAL || | |
| ssl_impl->s3->send_alert[1] != alert) { | |
| // We are already attempting to write a different alert. | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_PROTOCOL_IS_SHUTDOWN); | |
| return -1; | |
| } | |
| return ssl_impl->method->dispatch_alert(ssl_impl); | |
| } | |
| return ssl_send_alert_impl(ssl_impl, SSL3_AL_FATAL, alert); | |
| } | |
| int SSL_set_quic_transport_params(SSL *ssl, const uint8_t *params, | |
| size_t params_len) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| return ssl_impl->config && ssl_impl->config->quic_transport_params.CopyFrom( | |
| Span(params, params_len)); | |
| } | |
| void SSL_get_peer_quic_transport_params(const SSL *ssl, | |
| const uint8_t **out_params, | |
| size_t *out_params_len) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| *out_params = ssl_impl->s3->peer_quic_transport_params.data(); | |
| *out_params_len = ssl_impl->s3->peer_quic_transport_params.size(); | |
| } | |
| int SSL_set_quic_early_data_context(SSL *ssl, const uint8_t *context, | |
| size_t context_len) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| return ssl_impl->config && ssl_impl->config->quic_early_data_context.CopyFrom( | |
| Span(context, context_len)); | |
| } | |
| void SSL_CTX_set_early_data_enabled(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->enable_early_data = !!enabled; | |
| } | |
| void SSL_set_early_data_enabled(SSL *ssl, int enabled) { | |
| FromOpaque(ssl)->enable_early_data = !!enabled; | |
| } | |
| int SSL_in_early_data(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->s3->hs == nullptr) { | |
| return 0; | |
| } | |
| return ssl_impl->s3->hs->in_early_data; | |
| } | |
| int SSL_early_data_accepted(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->early_data_accepted; | |
| } | |
| void SSL_reset_early_data_reject(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| SSL_HANDSHAKE *hs = ssl_impl->s3->hs.get(); | |
| if (hs == nullptr || // | |
| hs->wait != ssl_hs_early_data_rejected) { | |
| abort(); | |
| } | |
| hs->wait = ssl_hs_ok; | |
| hs->in_early_data = false; | |
| hs->early_session.reset(); | |
| // Discard any unfinished writes from the perspective of `SSL_write`'s | |
| // retry. The handshake will transparently flush out the pending record | |
| // (discarded by the server) to keep the framing correct. | |
| ssl_impl->s3->pending_write = {}; | |
| ssl_impl->s3->unreported_bytes_written = 0; | |
| } | |
| enum ssl_early_data_reason_t SSL_get_early_data_reason(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->early_data_reason; | |
| } | |
| const char *SSL_early_data_reason_string(enum ssl_early_data_reason_t reason) { | |
| switch (reason) { | |
| case ssl_early_data_unknown: | |
| return "unknown"; | |
| case ssl_early_data_disabled: | |
| return "disabled"; | |
| case ssl_early_data_accepted: | |
| return "accepted"; | |
| case ssl_early_data_protocol_version: | |
| return "protocol_version"; | |
| case ssl_early_data_peer_declined: | |
| return "peer_declined"; | |
| case ssl_early_data_no_session_offered: | |
| return "no_session_offered"; | |
| case ssl_early_data_session_not_resumed: | |
| return "session_not_resumed"; | |
| case ssl_early_data_unsupported_for_session: | |
| return "unsupported_for_session"; | |
| case ssl_early_data_hello_retry_request: | |
| return "hello_retry_request"; | |
| case ssl_early_data_alpn_mismatch: | |
| return "alpn_mismatch"; | |
| case ssl_early_data_channel_id: | |
| return "channel_id"; | |
| case ssl_early_data_ticket_age_skew: | |
| return "ticket_age_skew"; | |
| case ssl_early_data_quic_parameter_mismatch: | |
| return "quic_parameter_mismatch"; | |
| case ssl_early_data_alps_mismatch: | |
| return "alps_mismatch"; | |
| } | |
| return nullptr; | |
| } | |
| static int bio_retry_reason_to_error(int reason) { | |
| switch (reason) { | |
| case BIO_RR_CONNECT: | |
| return SSL_ERROR_WANT_CONNECT; | |
| case BIO_RR_ACCEPT: | |
| return SSL_ERROR_WANT_ACCEPT; | |
| default: | |
| return SSL_ERROR_SYSCALL; | |
| } | |
| } | |
| int SSL_get_error(const SSL *ssl, int ret_code) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ret_code > 0) { | |
| return SSL_ERROR_NONE; | |
| } | |
| // Make things return SSL_ERROR_SYSCALL when doing SSL_do_handshake etc, | |
| // where we do encode the error | |
| uint32_t err = ERR_peek_error(); | |
| if (err != 0) { | |
| if (ERR_GET_LIB(err) == ERR_LIB_SYS) { | |
| return SSL_ERROR_SYSCALL; | |
| } | |
| return SSL_ERROR_SSL; | |
| } | |
| if (ret_code == 0) { | |
| if (ssl_impl->s3->rwstate == SSL_ERROR_ZERO_RETURN) { | |
| return SSL_ERROR_ZERO_RETURN; | |
| } | |
| // An EOF was observed which violates the protocol, and the underlying | |
| // transport does not participate in the error queue. Bubble up to the | |
| // caller. | |
| return SSL_ERROR_SYSCALL; | |
| } | |
| switch (ssl_impl->s3->rwstate) { | |
| case SSL_ERROR_PENDING_SESSION: | |
| case SSL_ERROR_PENDING_CERTIFICATE: | |
| case SSL_ERROR_WANT_X509_LOOKUP: | |
| case SSL_ERROR_WANT_PRIVATE_KEY_OPERATION: | |
| case SSL_ERROR_PENDING_TICKET: | |
| case SSL_ERROR_EARLY_DATA_REJECTED: | |
| case SSL_ERROR_WANT_CERTIFICATE_VERIFY: | |
| case SSL_ERROR_WANT_RENEGOTIATE: | |
| case SSL_ERROR_HANDSHAKE_HINTS_READY: | |
| return ssl_impl->s3->rwstate; | |
| case SSL_ERROR_WANT_READ: { | |
| if (SSL_is_quic(ssl_impl)) { | |
| return SSL_ERROR_WANT_READ; | |
| } | |
| BIO *bio = SSL_get_rbio(ssl_impl); | |
| if (BIO_should_read(bio)) { | |
| return SSL_ERROR_WANT_READ; | |
| } | |
| if (BIO_should_write(bio)) { | |
| // TODO(davidben): OpenSSL historically checked for writes on the read | |
| // BIO. Can this be removed? | |
| return SSL_ERROR_WANT_WRITE; | |
| } | |
| if (BIO_should_io_special(bio)) { | |
| return bio_retry_reason_to_error(BIO_get_retry_reason(bio)); | |
| } | |
| break; | |
| } | |
| case SSL_ERROR_WANT_WRITE: { | |
| BIO *bio = SSL_get_wbio(ssl_impl); | |
| if (BIO_should_write(bio)) { | |
| return SSL_ERROR_WANT_WRITE; | |
| } | |
| if (BIO_should_read(bio)) { | |
| // TODO(davidben): OpenSSL historically checked for reads on the write | |
| // BIO. Can this be removed? | |
| return SSL_ERROR_WANT_READ; | |
| } | |
| if (BIO_should_io_special(bio)) { | |
| return bio_retry_reason_to_error(BIO_get_retry_reason(bio)); | |
| } | |
| break; | |
| } | |
| } | |
| return SSL_ERROR_SYSCALL; | |
| } | |
| const char *SSL_error_description(int err) { | |
| switch (err) { | |
| case SSL_ERROR_NONE: | |
| return "NONE"; | |
| case SSL_ERROR_SSL: | |
| return "SSL"; | |
| case SSL_ERROR_WANT_READ: | |
| return "WANT_READ"; | |
| case SSL_ERROR_WANT_WRITE: | |
| return "WANT_WRITE"; | |
| case SSL_ERROR_WANT_X509_LOOKUP: | |
| return "WANT_X509_LOOKUP"; | |
| case SSL_ERROR_SYSCALL: | |
| return "SYSCALL"; | |
| case SSL_ERROR_ZERO_RETURN: | |
| return "ZERO_RETURN"; | |
| case SSL_ERROR_WANT_CONNECT: | |
| return "WANT_CONNECT"; | |
| case SSL_ERROR_WANT_ACCEPT: | |
| return "WANT_ACCEPT"; | |
| case SSL_ERROR_PENDING_SESSION: | |
| return "PENDING_SESSION"; | |
| case SSL_ERROR_PENDING_CERTIFICATE: | |
| return "PENDING_CERTIFICATE"; | |
| case SSL_ERROR_WANT_PRIVATE_KEY_OPERATION: | |
| return "WANT_PRIVATE_KEY_OPERATION"; | |
| case SSL_ERROR_PENDING_TICKET: | |
| return "PENDING_TICKET"; | |
| case SSL_ERROR_EARLY_DATA_REJECTED: | |
| return "EARLY_DATA_REJECTED"; | |
| case SSL_ERROR_WANT_CERTIFICATE_VERIFY: | |
| return "WANT_CERTIFICATE_VERIFY"; | |
| case SSL_ERROR_WANT_RENEGOTIATE: | |
| return "WANT_RENEGOTIATE"; | |
| case SSL_ERROR_HANDSHAKE_HINTS_READY: | |
| return "HANDSHAKE_HINTS_READY"; | |
| default: | |
| return nullptr; | |
| } | |
| } | |
| uint32_t SSL_CTX_set_options(SSL_CTX *ctx, uint32_t options) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->options |= options; | |
| return ctx_impl->options; | |
| } | |
| uint32_t SSL_CTX_clear_options(SSL_CTX *ctx, uint32_t options) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->options &= ~options; | |
| return ctx_impl->options; | |
| } | |
| uint32_t SSL_CTX_get_options(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->options; | |
| } | |
| uint32_t SSL_set_options(SSL *ssl, uint32_t options) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->options |= options; | |
| return ssl_impl->options; | |
| } | |
| uint32_t SSL_clear_options(SSL *ssl, uint32_t options) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->options &= ~options; | |
| return ssl_impl->options; | |
| } | |
| uint32_t SSL_get_options(const SSL *ssl) { return FromOpaque(ssl)->options; } | |
| uint32_t SSL_CTX_set_mode(SSL_CTX *ctx, uint32_t mode) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->mode |= mode; | |
| return ctx_impl->mode; | |
| } | |
| uint32_t SSL_CTX_clear_mode(SSL_CTX *ctx, uint32_t mode) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->mode &= ~mode; | |
| return ctx_impl->mode; | |
| } | |
| uint32_t SSL_CTX_get_mode(const SSL_CTX *ctx) { return FromOpaque(ctx)->mode; } | |
| uint32_t SSL_set_mode(SSL *ssl, uint32_t mode) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->mode |= mode; | |
| return ssl_impl->mode; | |
| } | |
| uint32_t SSL_clear_mode(SSL *ssl, uint32_t mode) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->mode &= ~mode; | |
| return ssl_impl->mode; | |
| } | |
| uint32_t SSL_get_mode(const SSL *ssl) { return FromOpaque(ssl)->mode; } | |
| void SSL_CTX_set1_buffer_pool(SSL_CTX *ctx, CRYPTO_BUFFER_POOL *pool) { | |
| FromOpaque(ctx)->pool = UpRef(pool); | |
| } | |
| void SSL_CTX_set0_buffer_pool(SSL_CTX *ctx, CRYPTO_BUFFER_POOL *pool) { | |
| // Historically, `CRYPTO_BUFFER_POOL` was not reference-counted and this | |
| // function saved a non-owning pointer, expecting the caller to maintain a | |
| // lifetime relationship between the two objects. Now that pools are | |
| // reference-counted, the compatible behavior is to treat it as set0 rather | |
| // than ownership-transfering. | |
| return SSL_CTX_set1_buffer_pool(ctx, pool); | |
| } | |
| int SSL_get_tls_unique(const SSL *ssl, uint8_t *out, size_t *out_len, | |
| size_t max_out) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| *out_len = 0; | |
| OPENSSL_memset(out, 0, max_out); | |
| // tls-unique is not defined for TLS 1.3. | |
| if (!ssl_impl->s3->initial_handshake_complete || | |
| ssl_protocol_version(ssl_impl) >= TLS1_3_VERSION) { | |
| return 0; | |
| } | |
| // The tls-unique value is the first Finished message in the handshake, which | |
| // is the client's in a full handshake and the server's for a resumption. See | |
| // https://tools.ietf.org/html/rfc5929#section-3.1. | |
| Span<const uint8_t> finished = ssl_impl->s3->previous_client_finished; | |
| if (ssl_impl->session != nullptr) { | |
| // tls-unique is broken for resumed sessions unless EMS is used. | |
| if (!ssl_impl->session->extended_master_secret) { | |
| return 0; | |
| } | |
| finished = ssl_impl->s3->previous_server_finished; | |
| } | |
| *out_len = finished.size(); | |
| if (finished.size() > max_out) { | |
| *out_len = max_out; | |
| } | |
| OPENSSL_memcpy(out, finished.data(), *out_len); | |
| return 1; | |
| } | |
| static int set_session_id_context(CERT *cert, const uint8_t *sid_ctx, | |
| size_t sid_ctx_len) { | |
| if (!cert->sid_ctx.TryCopyFrom(Span(sid_ctx, sid_ctx_len))) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| int SSL_CTX_set_session_id_context(SSL_CTX *ctx, const uint8_t *sid_ctx, | |
| size_t sid_ctx_len) { | |
| return set_session_id_context(FromOpaque(ctx)->cert.get(), sid_ctx, | |
| sid_ctx_len); | |
| } | |
| int SSL_set_session_id_context(SSL *ssl, const uint8_t *sid_ctx, | |
| size_t sid_ctx_len) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| return set_session_id_context(ssl_impl->config->cert.get(), sid_ctx, | |
| sid_ctx_len); | |
| } | |
| const uint8_t *SSL_get0_session_id_context(const SSL *ssl, size_t *out_len) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| assert(ssl_impl->config); | |
| *out_len = 0; | |
| return nullptr; | |
| } | |
| *out_len = ssl_impl->config->cert->sid_ctx.size(); | |
| return ssl_impl->config->cert->sid_ctx.data(); | |
| } | |
| int SSL_get_fd(const SSL *ssl) { return SSL_get_rfd(ssl); } | |
| int SSL_get_rfd(const SSL *ssl) { | |
| int ret = -1; | |
| BIO *b = BIO_find_type(SSL_get_rbio(ssl), BIO_TYPE_DESCRIPTOR); | |
| if (b != nullptr) { | |
| BIO_get_fd(b, &ret); | |
| } | |
| return ret; | |
| } | |
| int SSL_get_wfd(const SSL *ssl) { | |
| int ret = -1; | |
| BIO *b = BIO_find_type(SSL_get_wbio(ssl), BIO_TYPE_DESCRIPTOR); | |
| if (b != nullptr) { | |
| BIO_get_fd(b, &ret); | |
| } | |
| return ret; | |
| } | |
| #if !defined(OPENSSL_NO_SOCK) | |
| int SSL_set_fd(SSL *ssl, int fd) { | |
| BIO *bio = BIO_new(BIO_s_socket()); | |
| if (bio == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_BUF_LIB); | |
| return 0; | |
| } | |
| BIO_set_fd(bio, fd, BIO_NOCLOSE); | |
| SSL_set_bio(ssl, bio, bio); | |
| return 1; | |
| } | |
| int SSL_set_wfd(SSL *ssl, int fd) { | |
| BIO *rbio = SSL_get_rbio(ssl); | |
| if (rbio == nullptr || BIO_method_type(rbio) != BIO_TYPE_SOCKET || | |
| BIO_get_fd(rbio, nullptr) != fd) { | |
| BIO *bio = BIO_new(BIO_s_socket()); | |
| if (bio == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_BUF_LIB); | |
| return 0; | |
| } | |
| BIO_set_fd(bio, fd, BIO_NOCLOSE); | |
| SSL_set0_wbio(ssl, bio); | |
| } else { | |
| // Copy the rbio over to the wbio. | |
| BIO_up_ref(rbio); | |
| SSL_set0_wbio(ssl, rbio); | |
| } | |
| return 1; | |
| } | |
| int SSL_set_rfd(SSL *ssl, int fd) { | |
| BIO *wbio = SSL_get_wbio(ssl); | |
| if (wbio == nullptr || BIO_method_type(wbio) != BIO_TYPE_SOCKET || | |
| BIO_get_fd(wbio, nullptr) != fd) { | |
| BIO *bio = BIO_new(BIO_s_socket()); | |
| if (bio == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_BUF_LIB); | |
| return 0; | |
| } | |
| BIO_set_fd(bio, fd, BIO_NOCLOSE); | |
| SSL_set0_rbio(ssl, bio); | |
| } else { | |
| // Copy the wbio over to the rbio. | |
| BIO_up_ref(wbio); | |
| SSL_set0_rbio(ssl, wbio); | |
| } | |
| return 1; | |
| } | |
| #endif // !OPENSSL_NO_SOCK | |
| static size_t copy_finished(void *out, size_t out_len, Span<const uint8_t> in) { | |
| if (out_len > in.size()) { | |
| out_len = in.size(); | |
| } | |
| OPENSSL_memcpy(out, in.data(), out_len); | |
| return in.size(); | |
| } | |
| size_t SSL_get_finished(const SSL *ssl, void *buf, size_t count) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->s3->initial_handshake_complete || | |
| ssl_protocol_version(ssl_impl) >= TLS1_3_VERSION) { | |
| return 0; | |
| } | |
| if (ssl_impl->server) { | |
| return copy_finished(buf, count, ssl_impl->s3->previous_server_finished); | |
| } | |
| return copy_finished(buf, count, ssl_impl->s3->previous_client_finished); | |
| } | |
| size_t SSL_get_peer_finished(const SSL *ssl, void *buf, size_t count) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->s3->initial_handshake_complete || | |
| ssl_protocol_version(ssl_impl) >= TLS1_3_VERSION) { | |
| return 0; | |
| } | |
| if (ssl_impl->server) { | |
| return copy_finished(buf, count, ssl_impl->s3->previous_client_finished); | |
| } | |
| return copy_finished(buf, count, ssl_impl->s3->previous_server_finished); | |
| } | |
| int SSL_get_verify_mode(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| assert(ssl_impl->config); | |
| return -1; | |
| } | |
| return ssl_impl->config->verify_mode; | |
| } | |
| int SSL_get_extms_support(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // TLS 1.3 does not require extended master secret and always reports as | |
| // supporting it. | |
| if (ssl_impl->s3->version == 0) { | |
| return 0; | |
| } | |
| if (ssl_protocol_version(ssl_impl) >= TLS1_3_VERSION) { | |
| return 1; | |
| } | |
| // If the initial handshake completed, query the established session. | |
| if (ssl_impl->s3->established_session != nullptr) { | |
| return ssl_impl->s3->established_session->extended_master_secret; | |
| } | |
| // Otherwise, query the in-progress handshake. | |
| if (ssl_impl->s3->hs != nullptr) { | |
| return ssl_impl->s3->hs->extended_master_secret; | |
| } | |
| assert(0); | |
| return 0; | |
| } | |
| int SSL_CTX_get_read_ahead(const SSL_CTX *ctx) { return 0; } | |
| int SSL_get_read_ahead(const SSL *ssl) { return 0; } | |
| int SSL_CTX_set_read_ahead(SSL_CTX *ctx, int yes) { return 1; } | |
| int SSL_set_read_ahead(SSL *ssl, int yes) { return 1; } | |
| int SSL_pending(const SSL *ssl) { | |
| return static_cast<int>(FromOpaque(ssl)->s3->pending_app_data.size()); | |
| } | |
| int SSL_has_pending(const SSL *ssl) { | |
| return SSL_pending(ssl) != 0 || !FromOpaque(ssl)->s3->read_buffer.empty(); | |
| } | |
| static bool has_cert_and_key(const SSLCredential *cred) { | |
| // TODO(davidben): If `cred->key_method` is set, that should be fine too. | |
| if (cred->privkey == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NO_PRIVATE_KEY_ASSIGNED); | |
| return false; | |
| } | |
| if (cred->chain == nullptr || | |
| sk_CRYPTO_BUFFER_value(cred->chain.get(), 0) == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NO_CERTIFICATE_ASSIGNED); | |
| return false; | |
| } | |
| return true; | |
| } | |
| int SSL_CTX_check_private_key(const SSL_CTX *ctx) { | |
| // There is no need to actually check consistency because inconsistent values | |
| // can never be configured. | |
| return has_cert_and_key(FromOpaque(ctx)->cert->legacy_credential.get()); | |
| } | |
| int SSL_check_private_key(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| // There is no need to actually check consistency because inconsistent values | |
| // can never be configured. | |
| return has_cert_and_key(ssl_impl->config->cert->legacy_credential.get()); | |
| } | |
| long SSL_get_default_timeout(const SSL *ssl) { | |
| return SSL_DEFAULT_SESSION_TIMEOUT; | |
| } | |
| int SSL_renegotiate(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| // Caller-initiated renegotiation is not supported. | |
| if (!ssl_impl->s3->renegotiate_pending) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return 0; | |
| } | |
| if (!ssl_can_renegotiate(ssl_impl)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NO_RENEGOTIATION); | |
| return 0; | |
| } | |
| // We should not have told the caller to release the private key. | |
| assert(!SSL_can_release_private_key(ssl_impl)); | |
| // Renegotiation is only supported at quiescent points in the application | |
| // protocol, namely in HTTPS, just before reading the HTTP response. | |
| // Require the record-layer be idle and avoid complexities of sending a | |
| // handshake record while an application_data record is being written. | |
| if (!ssl_impl->s3->write_buffer.empty() || | |
| ssl_impl->s3->write_shutdown != ssl_shutdown_none) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_NO_RENEGOTIATION); | |
| return 0; | |
| } | |
| // Begin a new handshake. | |
| if (ssl_impl->s3->hs != nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | |
| return 0; | |
| } | |
| ssl_impl->s3->hs = ssl_handshake_new(ssl_impl); | |
| if (ssl_impl->s3->hs == nullptr) { | |
| return 0; | |
| } | |
| ssl_impl->s3->renegotiate_pending = false; | |
| ssl_impl->s3->total_renegotiations++; | |
| return 1; | |
| } | |
| int SSL_renegotiate_pending(SSL *ssl) { | |
| return SSL_in_init(ssl) && FromOpaque(ssl)->s3->initial_handshake_complete; | |
| } | |
| int SSL_total_renegotiations(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->total_renegotiations; | |
| } | |
| size_t SSL_CTX_get_max_cert_list(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->max_cert_list; | |
| } | |
| void SSL_CTX_set_max_cert_list(SSL_CTX *ctx, size_t max_cert_list) { | |
| if (max_cert_list > kMaxHandshakeSize) { | |
| max_cert_list = kMaxHandshakeSize; | |
| } | |
| FromOpaque(ctx)->max_cert_list = (uint32_t)max_cert_list; | |
| } | |
| size_t SSL_get_max_cert_list(const SSL *ssl) { | |
| return FromOpaque(ssl)->max_cert_list; | |
| } | |
| void SSL_set_max_cert_list(SSL *ssl, size_t max_cert_list) { | |
| if (max_cert_list > kMaxHandshakeSize) { | |
| max_cert_list = kMaxHandshakeSize; | |
| } | |
| FromOpaque(ssl)->max_cert_list = (uint32_t)max_cert_list; | |
| } | |
| int SSL_CTX_set_max_send_fragment(SSL_CTX *ctx, size_t max_send_fragment) { | |
| if (max_send_fragment < 512) { | |
| max_send_fragment = 512; | |
| } | |
| if (max_send_fragment > SSL3_RT_MAX_PLAIN_LENGTH) { | |
| max_send_fragment = SSL3_RT_MAX_PLAIN_LENGTH; | |
| } | |
| FromOpaque(ctx)->max_send_fragment = (uint16_t)max_send_fragment; | |
| return 1; | |
| } | |
| int SSL_set_max_send_fragment(SSL *ssl, size_t max_send_fragment) { | |
| if (max_send_fragment < 512) { | |
| max_send_fragment = 512; | |
| } | |
| if (max_send_fragment > SSL3_RT_MAX_PLAIN_LENGTH) { | |
| max_send_fragment = SSL3_RT_MAX_PLAIN_LENGTH; | |
| } | |
| FromOpaque(ssl)->max_send_fragment = (uint16_t)max_send_fragment; | |
| return 1; | |
| } | |
| int SSL_set_mtu(SSL *ssl, unsigned mtu) { | |
| if (!SSL_is_dtls(ssl) || mtu < dtls1_min_mtu()) { | |
| return 0; | |
| } | |
| FromOpaque(ssl)->d1->mtu = mtu; | |
| return 1; | |
| } | |
| int SSL_get_secure_renegotiation_support(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->s3->version == 0) { | |
| return 0; | |
| } | |
| return ssl_protocol_version(ssl_impl) >= TLS1_3_VERSION || | |
| ssl_impl->s3->send_connection_binding; | |
| } | |
| size_t SSL_CTX_sess_number(const SSL_CTX *ctx) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| MutexReadLock lock(&ctx_impl->lock); | |
| return lh_SSL_SESSION_num_items(ctx_impl->sessions); | |
| } | |
| unsigned long SSL_CTX_sess_set_cache_size(SSL_CTX *ctx, unsigned long size) { | |
| return std::exchange(FromOpaque(ctx)->session_cache_size, size); | |
| } | |
| unsigned long SSL_CTX_sess_get_cache_size(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->session_cache_size; | |
| } | |
| int SSL_CTX_set_session_cache_mode(SSL_CTX *ctx, int mode) { | |
| return std::exchange(FromOpaque(ctx)->session_cache_mode, mode); | |
| } | |
| int SSL_CTX_get_session_cache_mode(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->session_cache_mode; | |
| } | |
| int SSL_CTX_get_tlsext_ticket_keys(SSL_CTX *ctx, void *out, size_t len) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| if (out == nullptr) { | |
| return 48; | |
| } | |
| if (len != 48) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_TICKET_KEYS_LENGTH); | |
| return 0; | |
| } | |
| // The default ticket keys are initialized lazily. Trigger a key | |
| // rotation to initialize them. | |
| if (!ssl_ctx_rotate_ticket_encryption_key(ctx_impl)) { | |
| return 0; | |
| } | |
| uint8_t *out_bytes = reinterpret_cast<uint8_t *>(out); | |
| MutexReadLock lock(&ctx_impl->lock); | |
| OPENSSL_memcpy(out_bytes, ctx_impl->ticket_key_current->name, 16); | |
| OPENSSL_memcpy(out_bytes + 16, ctx_impl->ticket_key_current->hmac_key, 16); | |
| OPENSSL_memcpy(out_bytes + 32, ctx_impl->ticket_key_current->aes_key, 16); | |
| return 1; | |
| } | |
| int SSL_CTX_set_tlsext_ticket_keys(SSL_CTX *ctx, const void *in, size_t len) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| if (in == nullptr) { | |
| return 48; | |
| } | |
| if (len != 48) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_TICKET_KEYS_LENGTH); | |
| return 0; | |
| } | |
| auto key = MakeUnique<TicketKey>(); | |
| if (!key) { | |
| return 0; | |
| } | |
| const uint8_t *in_bytes = reinterpret_cast<const uint8_t *>(in); | |
| OPENSSL_memcpy(key->name, in_bytes, 16); | |
| OPENSSL_memcpy(key->hmac_key, in_bytes + 16, 16); | |
| OPENSSL_memcpy(key->aes_key, in_bytes + 32, 16); | |
| // Disable automatic key rotation for manually-configured keys. This is now | |
| // the caller's responsibility. | |
| key->next_rotation_tv_sec = 0; | |
| ctx_impl->ticket_key_current = std::move(key); | |
| ctx_impl->ticket_key_prev.reset(); | |
| return 1; | |
| } | |
| int SSL_CTX_set_tlsext_ticket_key_cb( | |
| SSL_CTX *ctx, | |
| int (*callback)(SSL *ssl, uint8_t *key_name, uint8_t *iv, | |
| EVP_CIPHER_CTX *ctx, HMAC_CTX *hmac_ctx, int encrypt)) { | |
| FromOpaque(ctx)->ticket_key_cb = callback; | |
| return 1; | |
| } | |
| static bool check_no_duplicates(Span<const uint16_t> list, int reason) { | |
| if (list.size() < 2) { | |
| return true; | |
| } | |
| for (size_t i = 0; i < list.size() - 1; ++i) { | |
| for (size_t j = i + 1; j < list.size(); ++j) { | |
| if (list[i] == list[j]) { | |
| OPENSSL_PUT_ERROR(SSL, reason); | |
| return false; | |
| } | |
| } | |
| } | |
| return true; | |
| } | |
| static bool check_group_ids(Span<const uint16_t> group_ids) { | |
| for (uint16_t group_id : group_ids) { | |
| if (ssl_group_id_to_nid(group_id) == NID_undef) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNSUPPORTED_ELLIPTIC_CURVE); | |
| return false; | |
| } | |
| } | |
| return check_no_duplicates(group_ids, SSL_R_DUPLICATE_GROUP); | |
| } | |
| // validate_key_shares returns whether the `requested_key_shares` are free of | |
| // duplicates and are a (correctly ordered) subsequence of the supported | |
| // `groups`. | |
| static bool validate_key_shares(Span<const uint16_t> requested_key_shares, | |
| Span<const uint16_t> groups) { | |
| if (!check_no_duplicates(requested_key_shares, SSL_R_DUPLICATE_GROUP)) { | |
| return false; | |
| } | |
| if (requested_key_shares.size() > groups.size()) { | |
| return false; | |
| } | |
| size_t key_shares_idx = 0u, groups_idx = 0u; | |
| while (key_shares_idx < requested_key_shares.size() && | |
| groups_idx < groups.size()) { | |
| if (requested_key_shares[key_shares_idx] == groups[groups_idx++]) { | |
| ++key_shares_idx; | |
| } | |
| } | |
| return key_shares_idx == requested_key_shares.size(); | |
| } | |
| static void clear_key_shares_if_invalid(SSL_CONFIG *config) { | |
| if (!config->client_key_share_selections) { | |
| return; | |
| } | |
| if (!validate_key_shares(*(config->client_key_share_selections), | |
| config->supported_group_list)) { | |
| config->client_key_share_selections.reset(); | |
| } | |
| } | |
| static bool check_group_flags(Span<const uint32_t> flags) { | |
| if (flags.empty()) { | |
| return true; | |
| } | |
| // The last element must not have the "equal preference with next" flag, | |
| // because there is no next element. | |
| return (flags.back() & SSL_GROUP_FLAG_EQUAL_PREFERENCE_WITH_NEXT) == 0; | |
| } | |
| static bool set_group_ids_and_flags(const uint16_t *group_ids, | |
| const uint32_t *flags, size_t num_group_ids, | |
| Array<uint16_t> *groups_out, | |
| Array<uint32_t> *flags_out) { | |
| Span<const uint16_t> groups_span = num_group_ids == 0 | |
| ? DefaultSupportedGroupIds() | |
| : Span(group_ids, num_group_ids); | |
| if (!check_group_ids(groups_span)) { | |
| return false; | |
| } | |
| // If using default groups, always use default flags. | |
| if (flags == nullptr || num_group_ids == 0) { | |
| return groups_out->CopyFrom(groups_span) && | |
| flags_out->Init(groups_span.size()); | |
| } | |
| Span<const uint32_t> flags_span = Span(flags, num_group_ids); | |
| if (!check_group_flags(flags_span)) { | |
| return false; | |
| } | |
| return groups_out->CopyFrom(groups_span) && flags_out->CopyFrom(flags_span); | |
| } | |
| int SSL_CTX_set1_group_ids(SSL_CTX *ctx, const uint16_t *group_ids, | |
| size_t num_group_ids) { | |
| return SSL_CTX_set1_group_ids_with_flags(ctx, group_ids, /*flags=*/nullptr, | |
| num_group_ids); | |
| } | |
| int SSL_CTX_set1_group_ids_with_flags(SSL_CTX *ctx, const uint16_t *group_ids, | |
| const uint32_t *flags, | |
| size_t num_group_ids) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| return set_group_ids_and_flags(group_ids, flags, num_group_ids, | |
| &ctx_impl->supported_group_list, | |
| &ctx_impl->supported_group_list_flags); | |
| } | |
| int SSL_set1_group_ids(SSL *ssl, const uint16_t *group_ids, | |
| size_t num_group_ids) { | |
| return SSL_set1_group_ids_with_flags(ssl, group_ids, /*flags=*/nullptr, | |
| num_group_ids); | |
| } | |
| int SSL_set1_group_ids_with_flags(SSL *ssl, const uint16_t *group_ids, | |
| const uint32_t *flags, size_t num_group_ids) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| if (set_group_ids_and_flags(group_ids, flags, num_group_ids, | |
| &ssl_impl->config->supported_group_list, | |
| &ssl_impl->config->supported_group_list_flags)) { | |
| clear_key_shares_if_invalid(ssl_impl->config.get()); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static bool check_tls13_cipher_flags(Span<const uint32_t> flags) { | |
| if (flags.empty()) { | |
| return true; | |
| } | |
| // The last element must not have the "equal preference with next" flag, | |
| // because there is no next element. | |
| if ((flags.back() & SSL_CIPHER_FLAG_EQUAL_PREFERENCE_WITH_NEXT) != 0) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_CIPHER_FLAGS); | |
| return false; | |
| } | |
| return true; | |
| } | |
| static bool check_tls13_cipher_ids(Span<const uint16_t> cipher_ids) { | |
| for (uint16_t cipher_id : cipher_ids) { | |
| const SSL_CIPHER *cipher = SSL_get_cipher_by_value(cipher_id); | |
| if (cipher == nullptr || | |
| SSL_CIPHER_get_min_version(cipher) != TLS1_3_VERSION) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNKNOWN_CIPHER_TYPE); | |
| return false; | |
| } | |
| } | |
| return check_no_duplicates(cipher_ids, SSL_R_DUPLICATE_CIPHER); | |
| } | |
| static bool set_tls13_ciphers(const uint16_t *cipher_ids, const uint32_t *flags, | |
| size_t num_cipher_ids, | |
| SSLCipherPreferenceList *out) { | |
| if (num_cipher_ids == 0) { | |
| return ssl_create_default_tls13_cipher_list(out); | |
| } | |
| Span<const uint16_t> ciphers_span(cipher_ids, num_cipher_ids); | |
| if (!check_tls13_cipher_ids(ciphers_span)) { | |
| return false; | |
| } | |
| Array<bool> in_group_flags; | |
| if (!in_group_flags.Init(num_cipher_ids)) { | |
| return false; | |
| } | |
| if (flags == nullptr) { | |
| return out->Init(ciphers_span, in_group_flags); | |
| } | |
| Span<const uint32_t> flags_span = Span(flags, num_cipher_ids); | |
| if (!check_tls13_cipher_flags(flags_span)) { | |
| return false; | |
| } | |
| for (size_t i = 0; i < flags_span.size(); ++i) { | |
| in_group_flags[i] = | |
| (flags_span[i] & SSL_CIPHER_FLAG_EQUAL_PREFERENCE_WITH_NEXT) != 0; | |
| } | |
| return out->Init(ciphers_span, in_group_flags); | |
| } | |
| int SSL_CTX_set1_tls13_ciphers(SSL_CTX *ctx, const uint16_t *cipher_ids, | |
| const uint32_t *flags, size_t num_cipher_ids) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| return set_tls13_ciphers(cipher_ids, flags, num_cipher_ids, | |
| &ctx_impl->tls13_cipher_list); | |
| } | |
| int SSL_set1_tls13_ciphers(SSL *ssl, const uint16_t *cipher_ids, | |
| const uint32_t *flags, size_t num_cipher_ids) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| return set_tls13_ciphers(cipher_ids, flags, num_cipher_ids, | |
| &ssl_impl->config->tls13_cipher_list); | |
| } | |
| static bool ssl_nids_to_group_ids(Array<uint16_t> *out_group_ids, | |
| Span<const int> nids) { | |
| if (nids.empty()) { | |
| return out_group_ids->CopyFrom(DefaultSupportedGroupIds()); | |
| } | |
| Array<uint16_t> group_ids; | |
| if (!group_ids.InitForOverwrite(nids.size())) { | |
| return false; | |
| } | |
| for (size_t i = 0; i < nids.size(); i++) { | |
| if (!ssl_nid_to_group_id(&group_ids[i], nids[i])) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNSUPPORTED_ELLIPTIC_CURVE); | |
| return false; | |
| } | |
| } | |
| if (!check_no_duplicates(group_ids, SSL_R_DUPLICATE_GROUP)) { | |
| return false; | |
| } | |
| *out_group_ids = std::move(group_ids); | |
| return true; | |
| } | |
| int SSL_CTX_set1_groups(SSL_CTX *ctx, const int *groups, size_t num_groups) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| return ssl_nids_to_group_ids(&ctx_impl->supported_group_list, | |
| Span(groups, num_groups)) && | |
| ctx_impl->supported_group_list_flags.Init( | |
| ctx_impl->supported_group_list.size()); | |
| } | |
| int SSL_set1_groups(SSL *ssl, const int *groups, size_t num_groups) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| if (ssl_nids_to_group_ids(&ssl_impl->config->supported_group_list, | |
| Span(groups, num_groups)) && | |
| ssl_impl->config->supported_group_list_flags.Init( | |
| ssl_impl->config->supported_group_list.size())) { | |
| clear_key_shares_if_invalid(ssl_impl->config.get()); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static bool ssl_str_to_group_ids(Array<uint16_t> *out_group_ids, | |
| const char *str) { | |
| // Count the number of groups in the list. | |
| size_t count = 0; | |
| const char *ptr = str, *col; | |
| do { | |
| col = strchr(ptr, ':'); | |
| count++; | |
| if (col) { | |
| ptr = col + 1; | |
| } | |
| } while (col); | |
| Array<uint16_t> group_ids; | |
| if (!group_ids.InitForOverwrite(count)) { | |
| return false; | |
| } | |
| size_t i = 0; | |
| ptr = str; | |
| do { | |
| col = strchr(ptr, ':'); | |
| if (!ssl_name_to_group_id(&group_ids[i++], ptr, | |
| col ? (size_t)(col - ptr) : strlen(ptr))) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNSUPPORTED_ELLIPTIC_CURVE); | |
| return false; | |
| } | |
| if (col) { | |
| ptr = col + 1; | |
| } | |
| } while (col); | |
| assert(i == count); | |
| if (!check_no_duplicates(group_ids, SSL_R_DUPLICATE_GROUP)) { | |
| return false; | |
| } | |
| *out_group_ids = std::move(group_ids); | |
| return true; | |
| } | |
| int SSL_CTX_set1_groups_list(SSL_CTX *ctx, const char *groups) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| return ssl_str_to_group_ids(&ctx_impl->supported_group_list, groups) && | |
| ctx_impl->supported_group_list_flags.Init( | |
| ctx_impl->supported_group_list.size()); | |
| } | |
| int SSL_set1_groups_list(SSL *ssl, const char *groups) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| if (ssl_str_to_group_ids(&ssl_impl->config->supported_group_list, groups) && | |
| ssl_impl->config->supported_group_list_flags.Init( | |
| ssl_impl->config->supported_group_list.size())) { | |
| clear_key_shares_if_invalid(ssl_impl->config.get()); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| uint16_t SSL_get_group_id(const SSL *ssl) { | |
| SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| if (session == nullptr) { | |
| return 0; | |
| } | |
| return session->group_id; | |
| } | |
| int SSL_get_negotiated_group(const SSL *ssl) { | |
| uint16_t group_id = SSL_get_group_id(ssl); | |
| if (group_id == 0) { | |
| return NID_undef; | |
| } | |
| return ssl_group_id_to_nid(group_id); | |
| } | |
| int SSL_set1_client_key_shares(SSL *ssl, const uint16_t *group_ids, | |
| size_t num_group_ids) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| auto requested_key_shares = Span(group_ids, num_group_ids); | |
| if (!validate_key_shares(requested_key_shares, | |
| ssl_impl->config->supported_group_list)) { | |
| return 0; | |
| } | |
| assert(requested_key_shares.size() <= kNumNamedGroups); | |
| ssl_impl->config->client_key_share_selections.emplace(); | |
| ssl_impl->config->client_key_share_selections->CopyFrom(requested_key_shares); | |
| return 1; | |
| } | |
| int SSL_set1_server_supported_groups_hint(SSL *ssl, | |
| const uint16_t *server_groups, | |
| size_t num_server_groups) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| auto span = Span(server_groups, num_server_groups); | |
| return ssl_impl->config->server_supported_groups_hint.CopyFrom(span); | |
| } | |
| int SSL_CTX_set_tmp_dh(SSL_CTX *ctx, const DH *dh) { return 1; } | |
| int SSL_set_tmp_dh(SSL *ssl, const DH *dh) { return 1; } | |
| STACK_OF(SSL_CIPHER) *SSL_CTX_get_ciphers(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->cipher_list->ciphers(); | |
| } | |
| int SSL_CTX_cipher_in_group(const SSL_CTX *ctx, size_t i) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| if (i >= sk_SSL_CIPHER_num(ctx_impl->cipher_list->ciphers())) { | |
| return 0; | |
| } | |
| return ctx_impl->cipher_list->in_group_flags()[i]; | |
| } | |
| STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *ssl) { | |
| if (ssl == nullptr) { | |
| return nullptr; | |
| } | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->config == nullptr) { | |
| assert(ssl_impl->config); | |
| return nullptr; | |
| } | |
| return ssl_impl->config->cipher_list | |
| ? ssl_impl->config->cipher_list->ciphers() | |
| : ssl_impl->ctx->cipher_list->ciphers(); | |
| } | |
| const char *SSL_get_cipher_list(const SSL *ssl, int n) { | |
| if (ssl == nullptr) { | |
| return nullptr; | |
| } | |
| const STACK_OF(SSL_CIPHER) *sk = SSL_get_ciphers(ssl); | |
| if (sk == nullptr || n < 0 || | |
| static_cast<size_t>(n) >= sk_SSL_CIPHER_num(sk)) { | |
| return nullptr; | |
| } | |
| const SSL_CIPHER *c = sk_SSL_CIPHER_value(sk, n); | |
| if (c == nullptr) { | |
| return nullptr; | |
| } | |
| return c->name; | |
| } | |
| int SSL_CTX_set_cipher_list(SSL_CTX *ctx, const char *str) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| return ssl_create_cipher_list(&ctx_impl->cipher_list, str, | |
| false /* not strict */); | |
| } | |
| int SSL_CTX_set_strict_cipher_list(SSL_CTX *ctx, const char *str) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| return ssl_create_cipher_list(&ctx_impl->cipher_list, str, true /* strict */); | |
| } | |
| int SSL_set_cipher_list(SSL *ssl, const char *str) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| return ssl_create_cipher_list(&ssl_impl->config->cipher_list, str, | |
| false /* not strict */); | |
| } | |
| int SSL_set_strict_cipher_list(SSL *ssl, const char *str) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| return ssl_create_cipher_list(&ssl_impl->config->cipher_list, str, | |
| true /* strict */); | |
| } | |
| const char *SSL_get_servername(const SSL *ssl, const int type) { | |
| if (type != TLSEXT_NAMETYPE_host_name) { | |
| return nullptr; | |
| } | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // Historically, `SSL_get_servername` was also the configuration getter | |
| // corresponding to `SSL_set_tlsext_host_name`. | |
| if (ssl_impl->hostname != nullptr) { | |
| return ssl_impl->hostname.get(); | |
| } | |
| return ssl_impl->s3->hostname.get(); | |
| } | |
| int SSL_get_servername_type(const SSL *ssl) { | |
| if (SSL_get_servername(ssl, TLSEXT_NAMETYPE_host_name) == nullptr) { | |
| return -1; | |
| } | |
| return TLSEXT_NAMETYPE_host_name; | |
| } | |
| void SSL_CTX_set_custom_verify( | |
| SSL_CTX *ctx, int mode, | |
| enum ssl_verify_result_t (*callback)(SSL *ssl, uint8_t *out_alert)) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->verify_mode = mode; | |
| ctx_impl->custom_verify_callback = callback; | |
| } | |
| void SSL_set_custom_verify( | |
| SSL *ssl, int mode, | |
| enum ssl_verify_result_t (*callback)(SSL *ssl, uint8_t *out_alert)) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->verify_mode = mode; | |
| ssl_impl->config->custom_verify_callback = callback; | |
| } | |
| void SSL_CTX_enable_signed_cert_timestamps(SSL_CTX *ctx) { | |
| FromOpaque(ctx)->signed_cert_timestamps_enabled = true; | |
| } | |
| void SSL_enable_signed_cert_timestamps(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->signed_cert_timestamps_enabled = true; | |
| } | |
| void SSL_CTX_enable_ocsp_stapling(SSL_CTX *ctx) { | |
| FromOpaque(ctx)->ocsp_stapling_enabled = true; | |
| } | |
| void SSL_enable_ocsp_stapling(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->ocsp_stapling_enabled = true; | |
| } | |
| void SSL_get0_signed_cert_timestamp_list(const SSL *ssl, const uint8_t **out, | |
| size_t *out_len) { | |
| SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| if (FromOpaque(ssl)->server || !session || | |
| !session->signed_cert_timestamp_list) { | |
| *out_len = 0; | |
| *out = nullptr; | |
| return; | |
| } | |
| *out = CRYPTO_BUFFER_data(session->signed_cert_timestamp_list.get()); | |
| *out_len = CRYPTO_BUFFER_len(session->signed_cert_timestamp_list.get()); | |
| } | |
| void SSL_get0_ocsp_response(const SSL *ssl, const uint8_t **out, | |
| size_t *out_len) { | |
| SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| if (FromOpaque(ssl)->server || !session || !session->ocsp_response) { | |
| *out_len = 0; | |
| *out = nullptr; | |
| return; | |
| } | |
| *out = CRYPTO_BUFFER_data(session->ocsp_response.get()); | |
| *out_len = CRYPTO_BUFFER_len(session->ocsp_response.get()); | |
| } | |
| int SSL_set_tlsext_host_name(SSL *ssl, const char *name) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->hostname.reset(); | |
| if (name == nullptr) { | |
| return 1; | |
| } | |
| size_t len = strlen(name); | |
| if (len == 0 || len > TLSEXT_MAXLEN_host_name) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_SSL3_EXT_INVALID_SERVERNAME); | |
| return 0; | |
| } | |
| ssl_impl->hostname.reset(OPENSSL_strdup(name)); | |
| if (ssl_impl->hostname == nullptr) { | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| int SSL_CTX_set_tlsext_servername_callback( | |
| SSL_CTX *ctx, int (*callback)(SSL *ssl, int *out_alert, void *arg)) { | |
| FromOpaque(ctx)->servername_callback = callback; | |
| return 1; | |
| } | |
| int SSL_CTX_set_tlsext_servername_arg(SSL_CTX *ctx, void *arg) { | |
| FromOpaque(ctx)->servername_arg = arg; | |
| return 1; | |
| } | |
| int SSL_select_next_proto(uint8_t **out, uint8_t *out_len, const uint8_t *peer, | |
| unsigned peer_len, const uint8_t *supported, | |
| unsigned supported_len) { | |
| *out = nullptr; | |
| *out_len = 0; | |
| // Both `peer` and `supported` must be valid protocol lists, but `peer` may be | |
| // empty in NPN. | |
| auto peer_span = Span(peer, peer_len); | |
| auto supported_span = Span(supported, supported_len); | |
| if ((!peer_span.empty() && !ssl_is_valid_alpn_list(peer_span)) || | |
| !ssl_is_valid_alpn_list(supported_span)) { | |
| return OPENSSL_NPN_NO_OVERLAP; | |
| } | |
| // For each protocol in peer preference order, see if we support it. | |
| CBS cbs = peer_span, proto; | |
| while (CBS_len(&cbs) != 0) { | |
| if (!CBS_get_u8_length_prefixed(&cbs, &proto) || CBS_len(&proto) == 0) { | |
| return OPENSSL_NPN_NO_OVERLAP; | |
| } | |
| if (ssl_alpn_list_contains_protocol(Span(supported, supported_len), | |
| proto)) { | |
| // This function is not const-correct for compatibility with existing | |
| // callers. | |
| *out = const_cast<uint8_t *>(CBS_data(&proto)); | |
| // A u8 length prefix will fit in `uint8_t`. | |
| *out_len = static_cast<uint8_t>(CBS_len(&proto)); | |
| return OPENSSL_NPN_NEGOTIATED; | |
| } | |
| } | |
| // There's no overlap between our protocols and the peer's list. In ALPN, the | |
| // caller is expected to fail the connection with no_application_protocol. In | |
| // NPN, the caller is expected to opportunistically select the first protocol. | |
| // See draft-agl-tls-nextprotoneg-04, section 6. | |
| cbs = supported_span; | |
| if (!CBS_get_u8_length_prefixed(&cbs, &proto) || CBS_len(&proto) == 0) { | |
| return OPENSSL_NPN_NO_OVERLAP; | |
| } | |
| // See above. | |
| *out = const_cast<uint8_t *>(CBS_data(&proto)); | |
| *out_len = static_cast<uint8_t>(CBS_len(&proto)); | |
| return OPENSSL_NPN_NO_OVERLAP; | |
| } | |
| void SSL_get0_next_proto_negotiated(const SSL *ssl, const uint8_t **out_data, | |
| unsigned *out_len) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // NPN protocols have one-byte lengths, so they must fit in `unsigned`. | |
| assert(ssl_impl->s3->next_proto_negotiated.size() <= UINT_MAX); | |
| *out_data = ssl_impl->s3->next_proto_negotiated.data(); | |
| *out_len = static_cast<unsigned>(ssl_impl->s3->next_proto_negotiated.size()); | |
| } | |
| void SSL_CTX_set_next_protos_advertised_cb( | |
| SSL_CTX *ctx, | |
| int (*cb)(SSL *ssl, const uint8_t **out, unsigned *out_len, void *arg), | |
| void *arg) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->next_protos_advertised_cb = cb; | |
| ctx_impl->next_protos_advertised_cb_arg = arg; | |
| } | |
| void SSL_CTX_set_next_proto_select_cb(SSL_CTX *ctx, | |
| int (*cb)(SSL *ssl, uint8_t **out, | |
| uint8_t *out_len, | |
| const uint8_t *in, | |
| unsigned in_len, void *arg), | |
| void *arg) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->next_proto_select_cb = cb; | |
| ctx_impl->next_proto_select_cb_arg = arg; | |
| } | |
| int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos, | |
| size_t protos_len) { | |
| // Note this function's return value is backwards. | |
| auto span = Span(protos, protos_len); | |
| if (!span.empty() && !ssl_is_valid_alpn_list(span)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_ALPN_PROTOCOL_LIST); | |
| return 1; | |
| } | |
| return FromOpaque(ctx)->alpn_client_proto_list.CopyFrom(span) ? 0 : 1; | |
| } | |
| int SSL_set_alpn_protos(SSL *ssl, const uint8_t *protos, size_t protos_len) { | |
| // Note this function's return value is backwards. | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 1; | |
| } | |
| auto span = Span(protos, protos_len); | |
| if (!span.empty() && !ssl_is_valid_alpn_list(span)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_ALPN_PROTOCOL_LIST); | |
| return 1; | |
| } | |
| return ssl_impl->config->alpn_client_proto_list.CopyFrom(span) ? 0 : 1; | |
| } | |
| void SSL_CTX_set_alpn_select_cb(SSL_CTX *ctx, | |
| int (*cb)(SSL *ssl, const uint8_t **out, | |
| uint8_t *out_len, const uint8_t *in, | |
| unsigned in_len, void *arg), | |
| void *arg) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| ctx_impl->alpn_select_cb = cb; | |
| ctx_impl->alpn_select_cb_arg = arg; | |
| } | |
| void SSL_get0_alpn_selected(const SSL *ssl, const uint8_t **out_data, | |
| unsigned *out_len) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| Span<const uint8_t> protocol; | |
| if (SSL_in_early_data(ssl_impl) && !ssl_impl->server) { | |
| protocol = ssl_impl->s3->hs->early_session->early_alpn; | |
| } else { | |
| protocol = ssl_impl->s3->alpn_selected; | |
| } | |
| // ALPN protocols have one-byte lengths, so they must fit in `unsigned`. | |
| assert(protocol.size() < UINT_MAX); | |
| *out_data = protocol.data(); | |
| *out_len = static_cast<unsigned>(protocol.size()); | |
| } | |
| void SSL_CTX_set_allow_unknown_alpn_protos(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->allow_unknown_alpn_protos = !!enabled; | |
| } | |
| int SSL_add_application_settings(SSL *ssl, const uint8_t *proto, | |
| size_t proto_len, const uint8_t *settings, | |
| size_t settings_len) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| ALPSConfig config; | |
| if (!config.protocol.CopyFrom(Span(proto, proto_len)) || | |
| !config.settings.CopyFrom(Span(settings, settings_len)) || | |
| !ssl_impl->config->alps_configs.Push(std::move(config))) { | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| void SSL_get0_peer_application_settings(const SSL *ssl, | |
| const uint8_t **out_data, | |
| size_t *out_len) { | |
| const SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| Span<const uint8_t> settings = | |
| session ? session->peer_application_settings : Span<const uint8_t>(); | |
| *out_data = settings.data(); | |
| *out_len = settings.size(); | |
| } | |
| int SSL_has_application_settings(const SSL *ssl) { | |
| const SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| return session && session->has_application_settings; | |
| } | |
| void SSL_set_alps_use_new_codepoint(SSL *ssl, int use_new) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->alps_use_new_codepoint = !!use_new; | |
| } | |
| int SSL_CTX_add_cert_compression_alg(SSL_CTX *ctx, uint16_t alg_id, | |
| ssl_cert_compression_func_t compress, | |
| ssl_cert_decompression_func_t decompress) { | |
| assert(compress != nullptr || decompress != nullptr); | |
| auto *ctx_impl = FromOpaque(ctx); | |
| for (const auto &alg : ctx_impl->cert_compression_algs) { | |
| if (alg.alg_id == alg_id) { | |
| return 0; | |
| } | |
| } | |
| CertCompressionAlg alg; | |
| alg.alg_id = alg_id; | |
| alg.compress = compress; | |
| alg.decompress = decompress; | |
| return ctx_impl->cert_compression_algs.Push(alg); | |
| } | |
| void SSL_CTX_set_tls_channel_id_enabled(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->channel_id_enabled = !!enabled; | |
| } | |
| int SSL_CTX_enable_tls_channel_id(SSL_CTX *ctx) { | |
| SSL_CTX_set_tls_channel_id_enabled(ctx, 1); | |
| return 1; | |
| } | |
| void SSL_set_tls_channel_id_enabled(SSL *ssl, int enabled) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->channel_id_enabled = !!enabled; | |
| } | |
| int SSL_enable_tls_channel_id(SSL *ssl) { | |
| SSL_set_tls_channel_id_enabled(ssl, 1); | |
| return 1; | |
| } | |
| int SSL_CTX_set1_tls_channel_id(SSL_CTX *ctx, EVP_PKEY *private_key) { | |
| if (EVP_PKEY_get_ec_curve_nid(private_key) != NID_X9_62_prime256v1) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_CHANNEL_ID_NOT_P256); | |
| return 0; | |
| } | |
| FromOpaque(ctx)->channel_id_private = UpRef(private_key); | |
| return 1; | |
| } | |
| int SSL_set1_tls_channel_id(SSL *ssl, EVP_PKEY *private_key) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| if (EVP_PKEY_get_ec_curve_nid(private_key) != NID_X9_62_prime256v1) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_CHANNEL_ID_NOT_P256); | |
| return 0; | |
| } | |
| ssl_impl->config->channel_id_private = UpRef(private_key); | |
| return 1; | |
| } | |
| size_t SSL_get_tls_channel_id(SSL *ssl, uint8_t *out, size_t max_out) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->s3->channel_id_valid) { | |
| return 0; | |
| } | |
| OPENSSL_memcpy(out, ssl_impl->s3->channel_id, (max_out < 64) ? max_out : 64); | |
| return 64; | |
| } | |
| size_t SSL_get0_certificate_types(const SSL *ssl, const uint8_t **out_types) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| Span<const uint8_t> types; | |
| if (!ssl_impl->server && ssl_impl->s3->hs != nullptr) { | |
| types = ssl_impl->s3->hs->certificate_types; | |
| } | |
| *out_types = types.data(); | |
| return types.size(); | |
| } | |
| size_t SSL_get0_peer_verify_algorithms(const SSL *ssl, | |
| const uint16_t **out_sigalgs) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| Span<const uint16_t> sigalgs; | |
| if (ssl_impl->s3->hs != nullptr) { | |
| sigalgs = ssl_impl->s3->hs->peer_sigalgs; | |
| } | |
| *out_sigalgs = sigalgs.data(); | |
| return sigalgs.size(); | |
| } | |
| size_t SSL_get0_peer_delegation_algorithms(const SSL *ssl, | |
| const uint16_t **out_sigalgs) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| Span<const uint16_t> sigalgs; | |
| if (ssl_impl->s3->hs != nullptr) { | |
| sigalgs = ssl_impl->s3->hs->peer_delegated_credential_sigalgs; | |
| } | |
| *out_sigalgs = sigalgs.data(); | |
| return sigalgs.size(); | |
| } | |
| EVP_PKEY *SSL_get_privatekey(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| assert(ssl_impl->config); | |
| return nullptr; | |
| } | |
| return ssl_impl->config->cert->legacy_credential->privkey.get(); | |
| } | |
| EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->cert->legacy_credential->privkey.get(); | |
| } | |
| const SSL_CIPHER *SSL_get_current_cipher(const SSL *ssl) { | |
| const SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| return session == nullptr ? nullptr : session->cipher; | |
| } | |
| int SSL_session_reused(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->session_reused || SSL_in_early_data(ssl); | |
| } | |
| const COMP_METHOD *SSL_get_current_compression(SSL *ssl) { return nullptr; } | |
| const COMP_METHOD *SSL_get_current_expansion(SSL *ssl) { return nullptr; } | |
| int SSL_get_server_tmp_key(SSL *ssl, EVP_PKEY **out_key) { return 0; } | |
| int SSL_get_peer_tmp_key(SSL *ssl, EVP_PKEY **out_key) { return 0; } | |
| void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx, int mode) { | |
| FromOpaque(ctx)->quiet_shutdown = (mode != 0); | |
| } | |
| int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->quiet_shutdown; | |
| } | |
| void SSL_set_quiet_shutdown(SSL *ssl, int mode) { | |
| FromOpaque(ssl)->quiet_shutdown = (mode != 0); | |
| } | |
| int SSL_get_quiet_shutdown(const SSL *ssl) { | |
| return FromOpaque(ssl)->quiet_shutdown; | |
| } | |
| void SSL_set_shutdown(SSL *ssl, int mode) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| // It is an error to clear any bits that have already been set. (We can't try | |
| // to get a second close_notify or send two.) | |
| assert((SSL_get_shutdown(ssl) & mode) == SSL_get_shutdown(ssl)); | |
| if (mode & SSL_RECEIVED_SHUTDOWN && | |
| ssl_impl->s3->read_shutdown == ssl_shutdown_none) { | |
| ssl_impl->s3->read_shutdown = ssl_shutdown_close_notify; | |
| } | |
| if (mode & SSL_SENT_SHUTDOWN && | |
| ssl_impl->s3->write_shutdown == ssl_shutdown_none) { | |
| ssl_impl->s3->write_shutdown = ssl_shutdown_close_notify; | |
| } | |
| } | |
| int SSL_get_shutdown(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| int ret = 0; | |
| if (ssl_impl->s3->read_shutdown != ssl_shutdown_none) { | |
| // Historically, OpenSSL set `SSL_RECEIVED_SHUTDOWN` on both close_notify | |
| // and fatal alert. | |
| ret |= SSL_RECEIVED_SHUTDOWN; | |
| } | |
| if (ssl_impl->s3->write_shutdown == ssl_shutdown_close_notify) { | |
| // Historically, OpenSSL set `SSL_SENT_SHUTDOWN` on only close_notify. | |
| ret |= SSL_SENT_SHUTDOWN; | |
| } | |
| return ret; | |
| } | |
| SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl) { return FromOpaque(ssl)->ctx.get(); } | |
| SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return nullptr; | |
| } | |
| if (ssl_impl->ctx.get() == ctx) { | |
| return ssl_impl->ctx.get(); | |
| } | |
| // One cannot change the X.509 callbacks during a connection. | |
| auto *ctx_impl = FromOpaque(ctx); | |
| if (ssl_impl->ctx->x509_method != ctx_impl->x509_method) { | |
| assert(0); | |
| return nullptr; | |
| } | |
| UniquePtr<CERT> new_cert = ssl_cert_dup(ctx_impl->cert.get()); | |
| if (!new_cert) { | |
| return nullptr; | |
| } | |
| ssl_impl->config->cert = std::move(new_cert); | |
| ssl_impl->ctx = UpRef(ctx_impl); | |
| ssl_impl->enable_early_data = ssl_impl->ctx->enable_early_data; | |
| return ssl_impl->ctx.get(); | |
| } | |
| void SSL_set_info_callback(SSL *ssl, | |
| void (*cb)(const SSL *ssl, int type, int value)) { | |
| FromOpaque(ssl)->info_callback = cb; | |
| } | |
| void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl, int type, | |
| int value) { | |
| return FromOpaque(ssl)->info_callback; | |
| } | |
| int SSL_state(const SSL *ssl) { | |
| return SSL_in_init(ssl) ? SSL_ST_INIT : SSL_ST_OK; | |
| } | |
| void SSL_set_state(SSL *ssl, int state) {} | |
| char *SSL_get_shared_ciphers(const SSL *ssl, char *buf, int len) { | |
| if (len <= 0) { | |
| return nullptr; | |
| } | |
| buf[0] = '\0'; | |
| return buf; | |
| } | |
| int SSL_get_shared_sigalgs(SSL *ssl, int idx, int *psign, int *phash, | |
| int *psignandhash, uint8_t *rsig, uint8_t *rhash) { | |
| return 0; | |
| } | |
| int SSL_CTX_set_quic_method(SSL_CTX *ctx, const SSL_QUIC_METHOD *quic_method) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| if (ctx_impl->method->is_dtls) { | |
| return 0; | |
| } | |
| ctx_impl->quic_method = quic_method; | |
| return 1; | |
| } | |
| int SSL_set_quic_method(SSL *ssl, const SSL_QUIC_METHOD *quic_method) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->method->is_dtls) { | |
| return 0; | |
| } | |
| ssl_impl->quic_method = quic_method; | |
| return 1; | |
| } | |
| int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_unused *unused, | |
| CRYPTO_EX_dup *dup_unused, CRYPTO_EX_free *free_func) { | |
| return CRYPTO_get_ex_new_index_ex(&g_ex_data_class_ssl, argl, argp, | |
| free_func); | |
| } | |
| int SSL_set_ex_data(SSL *ssl, int idx, void *data) { | |
| return CRYPTO_set_ex_data(&FromOpaque(ssl)->ex_data, idx, data); | |
| } | |
| void *SSL_get_ex_data(const SSL *ssl, int idx) { | |
| return CRYPTO_get_ex_data(&FromOpaque(ssl)->ex_data, idx); | |
| } | |
| int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_unused *unused, | |
| CRYPTO_EX_dup *dup_unused, | |
| CRYPTO_EX_free *free_func) { | |
| return CRYPTO_get_ex_new_index_ex(&g_ex_data_class_ssl_ctx, argl, argp, | |
| free_func); | |
| } | |
| int SSL_CTX_set_ex_data(SSL_CTX *ctx, int idx, void *data) { | |
| return CRYPTO_set_ex_data(&FromOpaque(ctx)->ex_data, idx, data); | |
| } | |
| void *SSL_CTX_get_ex_data(const SSL_CTX *ctx, int idx) { | |
| return CRYPTO_get_ex_data(&FromOpaque(ctx)->ex_data, idx); | |
| } | |
| int SSL_want(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // Historically, OpenSSL did not track `SSL_ERROR_ZERO_RETURN` as an `rwstate` | |
| // value. We do, but map it back to `SSL_ERROR_NONE` to preserve the original | |
| // behavior. | |
| return ssl_impl->s3->rwstate == SSL_ERROR_ZERO_RETURN ? SSL_ERROR_NONE | |
| : ssl_impl->s3->rwstate; | |
| } | |
| void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx, | |
| RSA *(*cb)(SSL *ssl, int is_export, | |
| int keylength)) {} | |
| void SSL_set_tmp_rsa_callback(SSL *ssl, RSA *(*cb)(SSL *ssl, int is_export, | |
| int keylength)) {} | |
| void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx, | |
| DH *(*cb)(SSL *ssl, int is_export, | |
| int keylength)) {} | |
| void SSL_set_tmp_dh_callback(SSL *ssl, DH *(*cb)(SSL *ssl, int is_export, | |
| int keylength)) {} | |
| static int use_psk_identity_hint(UniquePtr<char> *out, | |
| const char *identity_hint) { | |
| if (identity_hint != nullptr && | |
| strlen(identity_hint) > PSK_MAX_IDENTITY_LEN) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_DATA_LENGTH_TOO_LONG); | |
| return 0; | |
| } | |
| // Clear currently configured hint, if any. | |
| out->reset(); | |
| // Treat the empty hint as not supplying one. Plain PSK makes it possible to | |
| // send either no hint (omit ServerKeyExchange) or an empty hint, while | |
| // ECDHE_PSK can only spell empty hint. Having different capabilities is odd, | |
| // so we interpret empty and missing as identical. | |
| if (identity_hint != nullptr && identity_hint[0] != '\0') { | |
| out->reset(OPENSSL_strdup(identity_hint)); | |
| if (*out == nullptr) { | |
| return 0; | |
| } | |
| } | |
| return 1; | |
| } | |
| int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint) { | |
| return use_psk_identity_hint(&FromOpaque(ctx)->psk_identity_hint, | |
| identity_hint); | |
| } | |
| int SSL_use_psk_identity_hint(SSL *ssl, const char *identity_hint) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| return use_psk_identity_hint(&ssl_impl->config->psk_identity_hint, | |
| identity_hint); | |
| } | |
| const char *SSL_get_psk_identity_hint(const SSL *ssl) { | |
| if (ssl == nullptr) { | |
| return nullptr; | |
| } | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->config == nullptr) { | |
| assert(ssl_impl->config); | |
| return nullptr; | |
| } | |
| return ssl_impl->config->psk_identity_hint.get(); | |
| } | |
| const char *SSL_get_psk_identity(const SSL *ssl) { | |
| if (ssl == nullptr) { | |
| return nullptr; | |
| } | |
| SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| if (session == nullptr) { | |
| return nullptr; | |
| } | |
| return session->psk_identity.get(); | |
| } | |
| void SSL_set_psk_client_callback( | |
| SSL *ssl, unsigned (*cb)(SSL *ssl, const char *hint, char *identity, | |
| unsigned max_identity_len, uint8_t *psk, | |
| unsigned max_psk_len)) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->psk_client_callback = cb; | |
| } | |
| void SSL_CTX_set_psk_client_callback( | |
| SSL_CTX *ctx, unsigned (*cb)(SSL *ssl, const char *hint, char *identity, | |
| unsigned max_identity_len, uint8_t *psk, | |
| unsigned max_psk_len)) { | |
| FromOpaque(ctx)->psk_client_callback = cb; | |
| } | |
| void SSL_set_psk_server_callback(SSL *ssl, | |
| unsigned (*cb)(SSL *ssl, const char *identity, | |
| uint8_t *psk, | |
| unsigned max_psk_len)) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->psk_server_callback = cb; | |
| } | |
| void SSL_CTX_set_psk_server_callback( | |
| SSL_CTX *ctx, unsigned (*cb)(SSL *ssl, const char *identity, uint8_t *psk, | |
| unsigned max_psk_len)) { | |
| FromOpaque(ctx)->psk_server_callback = cb; | |
| } | |
| void SSL_CTX_set_msg_callback(SSL_CTX *ctx, | |
| void (*cb)(int write_p, int version, | |
| int content_type, const void *buf, | |
| size_t len, SSL *ssl, void *arg)) { | |
| FromOpaque(ctx)->msg_callback = cb; | |
| } | |
| void SSL_CTX_set_msg_callback_arg(SSL_CTX *ctx, void *arg) { | |
| FromOpaque(ctx)->msg_callback_arg = arg; | |
| } | |
| void SSL_set_msg_callback(SSL *ssl, | |
| void (*cb)(int write_p, int version, int content_type, | |
| const void *buf, size_t len, SSL *ssl, | |
| void *arg)) { | |
| FromOpaque(ssl)->msg_callback = cb; | |
| } | |
| void SSL_set_msg_callback_arg(SSL *ssl, void *arg) { | |
| FromOpaque(ssl)->msg_callback_arg = arg; | |
| } | |
| void SSL_CTX_set_keylog_callback(SSL_CTX *ctx, | |
| void (*cb)(const SSL *ssl, const char *line)) { | |
| FromOpaque(ctx)->keylog_callback = cb; | |
| } | |
| void (*SSL_CTX_get_keylog_callback(const SSL_CTX *ctx))(const SSL *ssl, | |
| const char *line) { | |
| return FromOpaque(ctx)->keylog_callback; | |
| } | |
| void SSL_CTX_set_current_time_cb(SSL_CTX *ctx, | |
| void (*cb)(const SSL *ssl, | |
| struct timeval *out_clock)) { | |
| FromOpaque(ctx)->current_time_cb = cb; | |
| } | |
| int SSL_can_release_private_key(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_can_renegotiate(ssl_impl)) { | |
| // If the connection can renegotiate (client only), the private key may be | |
| // used in a future handshake. | |
| return 0; | |
| } | |
| // Otherwise, this is determined by the current handshake. | |
| return !ssl_impl->s3->hs || ssl_impl->s3->hs->can_release_private_key; | |
| } | |
| int SSL_is_init_finished(const SSL *ssl) { return !SSL_in_init(ssl); } | |
| int SSL_in_init(const SSL *ssl) { | |
| // This returns false once all the handshake state has been finalized, to | |
| // allow callbacks and getters based on SSL_in_init to return the correct | |
| // values. | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| SSL_HANDSHAKE *hs = ssl_impl->s3->hs.get(); | |
| return hs != nullptr && !hs->handshake_finalized; | |
| } | |
| int SSL_in_false_start(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->s3->hs == nullptr) { | |
| return 0; | |
| } | |
| return ssl_impl->s3->hs->in_false_start; | |
| } | |
| int SSL_cutthrough_complete(const SSL *ssl) { return SSL_in_false_start(ssl); } | |
| int SSL_is_server(const SSL *ssl) { return FromOpaque(ssl)->server; } | |
| int SSL_is_dtls(const SSL *ssl) { return FromOpaque(ssl)->method->is_dtls; } | |
| int SSL_is_quic(const SSL *ssl) { | |
| return FromOpaque(ssl)->quic_method != nullptr; | |
| } | |
| void SSL_CTX_set_select_certificate_cb( | |
| SSL_CTX *ctx, | |
| enum ssl_select_cert_result_t (*cb)(const SSL_CLIENT_HELLO *)) { | |
| FromOpaque(ctx)->select_certificate_cb = cb; | |
| } | |
| void SSL_CTX_set_dos_protection_cb(SSL_CTX *ctx, | |
| int (*cb)(const SSL_CLIENT_HELLO *)) { | |
| FromOpaque(ctx)->dos_protection_cb = cb; | |
| } | |
| void SSL_CTX_set_reverify_on_resume(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->reverify_on_resume = !!enabled; | |
| } | |
| void SSL_set_renegotiate_mode(SSL *ssl, enum ssl_renegotiate_mode_t mode) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| ssl_impl->renegotiate_mode = mode; | |
| // Check if `ssl_can_renegotiate` has changed and the configuration may now be | |
| // shed. HTTP clients may initially allow renegotiation for HTTP/1.1, and then | |
| // disable after the handshake once the ALPN protocol is known to be HTTP/2. | |
| ssl_maybe_shed_handshake_config(ssl_impl); | |
| } | |
| int SSL_get_ivs(const SSL *ssl, const uint8_t **out_read_iv, | |
| const uint8_t **out_write_iv, size_t *out_iv_len) { | |
| // No cipher suites maintain stateful internal IVs in DTLS. It would not be | |
| // compatible with reordering. | |
| if (SSL_is_dtls(ssl)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return 0; | |
| } | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| size_t write_iv_len; | |
| if (!ssl_impl->s3->aead_read_ctx->GetIV(out_read_iv, out_iv_len) || | |
| !ssl_impl->s3->aead_write_ctx->GetIV(out_write_iv, &write_iv_len) || | |
| *out_iv_len != write_iv_len) { | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| uint64_t SSL_get_read_sequence(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (SSL_is_dtls(ssl)) { | |
| // TODO(crbug.com/42290608): This API should not be implemented for DTLS or | |
| // QUIC. In QUIC we do not maintain a sequence number. | |
| const DTLSReadEpoch *read_epoch = &ssl_impl->d1->read_epoch; | |
| return DTLSRecordNumber(read_epoch->epoch, read_epoch->bitmap.max_seq_num()) | |
| .combined(); | |
| } | |
| return ssl_impl->s3->read_sequence; | |
| } | |
| uint64_t SSL_get_write_sequence(const SSL *ssl) { | |
| // TODO(crbug.com/42290608): This API should not be implemented for DTLS or | |
| // QUIC. In QUIC we do not maintain a sequence number. In DTLS, this API isn't | |
| // harmful per se, but the caller already needs to use a DTLS-specific API on | |
| // the read side. | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (SSL_is_dtls(ssl)) { | |
| return ssl_impl->d1->write_epoch.next_record.combined(); | |
| } | |
| return ssl_impl->s3->write_sequence; | |
| } | |
| int SSL_is_dtls_handshake_idle(const SSL *ssl) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| return !SSL_in_init(ssl) && | |
| // No unacknowledged messages in DTLS 1.3. In DTLS 1.2, there no ACKs | |
| // and we currently never clear `outgoing_messages` on the side that | |
| // speaks last. | |
| (ssl_protocol_version(ssl_impl) < TLS1_3_VERSION || | |
| ssl_impl->d1->outgoing_messages.empty()) && | |
| // No partial or out-of-order messages. | |
| std::all_of(std::begin(ssl_impl->d1->incoming_messages), | |
| std::end(ssl_impl->d1->incoming_messages), | |
| [](const auto &msg) { return msg == nullptr; }) && | |
| // Not trying to send a KeyUpdate. | |
| !ssl_impl->s3->key_update_pending && | |
| ssl_impl->d1->queued_key_update == bssl::QueuedKeyUpdate::kNone; | |
| } | |
| uint32_t SSL_get_dtls_handshake_read_seq(const SSL *ssl) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| return ssl_impl->d1->handshake_read_overflow | |
| ? uint32_t{0x10000} | |
| : uint32_t{ssl_impl->d1->handshake_read_seq}; | |
| } | |
| uint32_t SSL_get_dtls_handshake_write_seq(const SSL *ssl) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| return ssl_impl->d1->handshake_write_overflow | |
| ? uint32_t{0x10000} | |
| : uint32_t{ssl_impl->d1->handshake_write_seq}; | |
| } | |
| uint16_t SSL_get_dtls_read_epoch(const SSL *ssl) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| // Return the highest available epoch. | |
| return ssl_impl->d1->next_read_epoch ? ssl_impl->d1->next_read_epoch->epoch | |
| : ssl_impl->d1->read_epoch.epoch; | |
| } | |
| uint16_t SSL_get_dtls_write_epoch(const SSL *ssl) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| return FromOpaque(ssl)->d1->write_epoch.epoch(); | |
| } | |
| uint64_t SSL_get_dtls_read_sequence(const SSL *ssl, uint16_t epoch) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| const DTLSReadEpoch *read_epoch = dtls_get_read_epoch(ssl_impl, epoch); | |
| if (read_epoch == nullptr) { | |
| return UINT64_MAX; | |
| } | |
| uint64_t max_seq_num = read_epoch->bitmap.max_seq_num(); | |
| assert(max_seq_num <= DTLSRecordNumber::kMaxSequence); | |
| if (read_epoch->bitmap.ShouldDiscard(max_seq_num)) { | |
| // Increment to get to an available sequence number. | |
| max_seq_num++; | |
| } else { | |
| // If `max_seq_num` was available, the bitmap must have been empty. | |
| assert(max_seq_num == 0); | |
| } | |
| return max_seq_num; | |
| } | |
| uint64_t SSL_get_dtls_write_sequence(const SSL *ssl, uint16_t epoch) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| const DTLSWriteEpoch *write_epoch = dtls_get_write_epoch(ssl_impl, epoch); | |
| if (write_epoch == nullptr) { | |
| return UINT64_MAX; | |
| } | |
| return write_epoch->next_record.sequence(); | |
| } | |
| template <typename EpochState> | |
| static int get_dtls_traffic_secret( | |
| const SSLImpl *ssl, EpochState *(*get_epoch)(const SSLImpl *, uint16_t), | |
| const uint8_t **out_data, size_t *out_len, uint16_t epoch) { | |
| BSSL_CHECK(SSL_is_dtls(ssl)); | |
| // This function only applies to encrypted DTLS 1.3 epochs. | |
| if (epoch == 0 || ssl->s3->version == 0 || | |
| ssl_protocol_version(ssl) < TLS1_3_VERSION) { | |
| return 0; | |
| } | |
| const EpochState *epoch_state = get_epoch(ssl, epoch); | |
| if (epoch_state == nullptr) { | |
| return 0; | |
| } | |
| assert(!epoch_state->traffic_secret.empty()); | |
| *out_data = epoch_state->traffic_secret.data(); | |
| *out_len = epoch_state->traffic_secret.size(); | |
| return 1; | |
| } | |
| int SSL_get_dtls_read_traffic_secret(const SSL *ssl, const uint8_t **out_data, | |
| size_t *out_len, uint16_t epoch) { | |
| return get_dtls_traffic_secret(FromOpaque(ssl), dtls_get_read_epoch, out_data, | |
| out_len, epoch); | |
| } | |
| int SSL_get_dtls_write_traffic_secret(const SSL *ssl, const uint8_t **out_data, | |
| size_t *out_len, uint16_t epoch) { | |
| return get_dtls_traffic_secret(FromOpaque(ssl), dtls_get_write_epoch, | |
| out_data, out_len, epoch); | |
| } | |
| uint16_t SSL_get_peer_signature_algorithm(const SSL *ssl) { | |
| SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| if (session == nullptr) { | |
| return 0; | |
| } | |
| return session->peer_signature_algorithm; | |
| } | |
| size_t SSL_get_client_random(const SSL *ssl, uint8_t *out, size_t max_out) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (max_out == 0) { | |
| return sizeof(ssl_impl->s3->client_random); | |
| } | |
| if (max_out > sizeof(ssl_impl->s3->client_random)) { | |
| max_out = sizeof(ssl_impl->s3->client_random); | |
| } | |
| OPENSSL_memcpy(out, ssl_impl->s3->client_random, max_out); | |
| return max_out; | |
| } | |
| size_t SSL_get_server_random(const SSL *ssl, uint8_t *out, size_t max_out) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (max_out == 0) { | |
| return sizeof(ssl_impl->s3->server_random); | |
| } | |
| if (max_out > sizeof(ssl_impl->s3->server_random)) { | |
| max_out = sizeof(ssl_impl->s3->server_random); | |
| } | |
| OPENSSL_memcpy(out, ssl_impl->s3->server_random, max_out); | |
| return max_out; | |
| } | |
| uint16_t SSL_get_signature_algorithm_used(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| SSL_HANDSHAKE *hs = ssl_impl->s3->hs.get(); | |
| if (hs == nullptr) { | |
| return 0; | |
| } | |
| return hs->signature_algorithm; | |
| } | |
| const SSL_CIPHER *SSL_get_pending_cipher(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| SSL_HANDSHAKE *hs = ssl_impl->s3->hs.get(); | |
| if (hs == nullptr) { | |
| return nullptr; | |
| } | |
| return hs->new_cipher; | |
| } | |
| void SSL_set_retain_only_sha256_of_client_certs(SSL *ssl, int enabled) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->retain_only_sha256_of_client_certs = !!enabled; | |
| } | |
| void SSL_CTX_set_retain_only_sha256_of_client_certs(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->retain_only_sha256_of_client_certs = !!enabled; | |
| } | |
| void SSL_CTX_set_grease_enabled(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->grease_enabled = !!enabled; | |
| } | |
| void SSL_CTX_set_grease_sigalgs_enabled(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->grease_sigalgs_enabled = !!enabled; | |
| } | |
| void SSL_CTX_set_permute_extensions(SSL_CTX *ctx, int enabled) { | |
| FromOpaque(ctx)->permute_extensions = !!enabled; | |
| } | |
| void SSL_set_permute_extensions(SSL *ssl, int enabled) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->permute_extensions = !!enabled; | |
| } | |
| int32_t SSL_get_ticket_age_skew(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->ticket_age_skew; | |
| } | |
| void SSL_CTX_set_false_start_allowed_without_alpn(SSL_CTX *ctx, int allowed) { | |
| FromOpaque(ctx)->false_start_allowed_without_alpn = !!allowed; | |
| } | |
| int SSL_used_hello_retry_request(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->used_hello_retry_request; | |
| } | |
| void SSL_set_shed_handshake_config(SSL *ssl, int enable) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->shed_handshake_config = !!enable; | |
| } | |
| void SSL_set_jdk11_workaround(SSL *ssl, int enable) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->jdk11_workaround = !!enable; | |
| } | |
| void SSL_set_quic_use_legacy_codepoint(SSL *ssl, int use_legacy) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return; | |
| } | |
| ssl_impl->config->quic_use_legacy_codepoint = !!use_legacy; | |
| } | |
| int SSL_clear(SSL *ssl) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; // SSL_clear may not be used after shedding config. | |
| } | |
| // In OpenSSL, reusing a client `SSL` with `SSL_clear` causes the previously | |
| // established session to be offered the next time around. wpa_supplicant | |
| // depends on this behavior, so emulate it. | |
| UniquePtr<SSLSession> session; | |
| if (!ssl_impl->server && ssl_impl->s3->established_session != nullptr) { | |
| session = UpRef(ssl_impl->s3->established_session); | |
| } | |
| // The ssl->d1->mtu is simultaneously configuration (preserved across | |
| // clear) and connection-specific state (gets reset). | |
| // | |
| // TODO(davidben): Avoid this. | |
| unsigned mtu = 0; | |
| if (ssl_impl->d1 != nullptr) { | |
| mtu = ssl_impl->d1->mtu; | |
| } | |
| ssl_impl->method->ssl_free(ssl_impl); | |
| if (!ssl_impl->method->ssl_new(ssl_impl)) { | |
| return 0; | |
| } | |
| if (SSL_is_dtls(ssl) && (SSL_get_options(ssl) & SSL_OP_NO_QUERY_MTU)) { | |
| ssl_impl->d1->mtu = mtu; | |
| } | |
| if (session != nullptr) { | |
| SSL_set_session(ssl, session.get()); | |
| } | |
| return 1; | |
| } | |
| int SSL_CTX_sess_connect(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_connect_good(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_connect_renegotiate(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_accept(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_accept_renegotiate(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_accept_good(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_hits(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_cb_hits(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_misses(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_timeouts(const SSL_CTX *ctx) { return 0; } | |
| int SSL_CTX_sess_cache_full(const SSL_CTX *ctx) { return 0; } | |
| int SSL_num_renegotiations(const SSL *ssl) { | |
| return SSL_total_renegotiations(ssl); | |
| } | |
| int SSL_CTX_need_tmp_RSA(const SSL_CTX *ctx) { return 0; } | |
| int SSL_need_tmp_RSA(const SSL *ssl) { return 0; } | |
| int SSL_CTX_set_tmp_rsa(SSL_CTX *ctx, const RSA *rsa) { return 1; } | |
| int SSL_set_tmp_rsa(SSL *ssl, const RSA *rsa) { return 1; } | |
| void ERR_load_SSL_strings() {} | |
| void SSL_load_error_strings() {} | |
| int SSL_cache_hit(SSL *ssl) { return SSL_session_reused(ssl); } | |
| int SSL_CTX_set_tmp_ecdh(SSL_CTX *ctx, const EC_KEY *ec_key) { | |
| if (ec_key == nullptr || EC_KEY_get0_group(ec_key) == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_PASSED_NULL_PARAMETER); | |
| return 0; | |
| } | |
| int nid = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec_key)); | |
| return SSL_CTX_set1_groups(ctx, &nid, 1); | |
| } | |
| int SSL_set_tmp_ecdh(SSL *ssl, const EC_KEY *ec_key) { | |
| if (ec_key == nullptr || EC_KEY_get0_group(ec_key) == nullptr) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_PASSED_NULL_PARAMETER); | |
| return 0; | |
| } | |
| int nid = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec_key)); | |
| return SSL_set1_groups(ssl, &nid, 1); | |
| } | |
| void SSL_CTX_set_ticket_aead_method(SSL_CTX *ctx, | |
| const SSL_TICKET_AEAD_METHOD *aead_method) { | |
| FromOpaque(ctx)->ticket_aead_method = aead_method; | |
| } | |
| SSL_SESSION *SSL_process_tls13_new_session_ticket(SSL *ssl, const uint8_t *buf, | |
| size_t buf_len) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (SSL_in_init(ssl_impl) || // | |
| ssl_protocol_version(ssl_impl) != TLS1_3_VERSION || // | |
| ssl_impl->server) { | |
| // Only TLS 1.3 clients are supported. | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED); | |
| return nullptr; | |
| } | |
| CBS cbs, body; | |
| CBS_init(&cbs, buf, buf_len); | |
| uint8_t type; | |
| if (!CBS_get_u8(&cbs, &type) || // | |
| !CBS_get_u24_length_prefixed(&cbs, &body) || // | |
| CBS_len(&cbs) != 0) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_DECODE_ERROR); | |
| return nullptr; | |
| } | |
| UniquePtr<SSLSession> session = | |
| tls13_create_session_with_ticket(ssl_impl, &body); | |
| if (!session) { | |
| // `tls13_create_session_with_ticket` puts the correct error. | |
| return nullptr; | |
| } | |
| return session.release(); | |
| } | |
| int SSL_CTX_set_num_tickets(SSL_CTX *ctx, size_t num_tickets) { | |
| num_tickets = std::min(num_tickets, kMaxTickets); | |
| static_assert(kMaxTickets <= 0xff, "Too many tickets."); | |
| FromOpaque(ctx)->num_tickets = static_cast<uint8_t>(num_tickets); | |
| return 1; | |
| } | |
| size_t SSL_CTX_get_num_tickets(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->num_tickets; | |
| } | |
| int SSL_set_tlsext_status_type(SSL *ssl, int type) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| if (!ssl_impl->config) { | |
| return 0; | |
| } | |
| ssl_impl->config->ocsp_stapling_enabled = type == TLSEXT_STATUSTYPE_ocsp; | |
| return 1; | |
| } | |
| int SSL_get_tlsext_status_type(const SSL *ssl) { | |
| const auto *ssl_impl = FromOpaque(ssl); | |
| if (ssl_impl->server) { | |
| SSL_HANDSHAKE *hs = ssl_impl->s3->hs.get(); | |
| return hs != nullptr && hs->ocsp_stapling_requested | |
| ? TLSEXT_STATUSTYPE_ocsp | |
| : TLSEXT_STATUSTYPE_nothing; | |
| } | |
| return ssl_impl->config != nullptr && ssl_impl->config->ocsp_stapling_enabled | |
| ? TLSEXT_STATUSTYPE_ocsp | |
| : TLSEXT_STATUSTYPE_nothing; | |
| } | |
| int SSL_set_tlsext_status_ocsp_resp(SSL *ssl, uint8_t *resp, size_t resp_len) { | |
| if (SSL_set_ocsp_response(ssl, resp, resp_len)) { | |
| OPENSSL_free(resp); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| size_t SSL_get_tlsext_status_ocsp_resp(const SSL *ssl, const uint8_t **out) { | |
| size_t ret; | |
| SSL_get0_ocsp_response(ssl, out, &ret); | |
| return ret; | |
| } | |
| int SSL_CTX_set_tlsext_status_cb(SSL_CTX *ctx, | |
| int (*callback)(SSL *ssl, void *arg)) { | |
| FromOpaque(ctx)->legacy_ocsp_callback = callback; | |
| return 1; | |
| } | |
| int SSL_CTX_set_tlsext_status_arg(SSL_CTX *ctx, void *arg) { | |
| FromOpaque(ctx)->legacy_ocsp_callback_arg = arg; | |
| return 1; | |
| } | |
| uint16_t SSL_get_curve_id(const SSL *ssl) { return SSL_get_group_id(ssl); } | |
| const char *SSL_get_curve_name(uint16_t curve_id) { | |
| return SSL_get_group_name(curve_id); | |
| } | |
| size_t SSL_get_all_curve_names(const char **out, size_t max_out) { | |
| return SSL_get_all_group_names(out, max_out); | |
| } | |
| int SSL_CTX_set1_curves(SSL_CTX *ctx, const int *curves, size_t num_curves) { | |
| return SSL_CTX_set1_groups(ctx, curves, num_curves); | |
| } | |
| int SSL_set1_curves(SSL *ssl, const int *curves, size_t num_curves) { | |
| return SSL_set1_groups(ssl, curves, num_curves); | |
| } | |
| int SSL_CTX_set1_curves_list(SSL_CTX *ctx, const char *curves) { | |
| return SSL_CTX_set1_groups_list(ctx, curves); | |
| } | |
| int SSL_set1_curves_list(SSL *ssl, const char *curves) { | |
| return SSL_set1_groups_list(ssl, curves); | |
| } | |
| namespace fips202205 { | |
| // (References are to SP 800-52r2): | |
| // Section 3.4.2.2 | |
| // "at least one of the NIST-approved curves, P-256 (secp256r1) and P384 | |
| // (secp384r1), shall be supported as described in RFC 8422." | |
| // | |
| // Section 3.3.1 | |
| // "The server shall be configured to only use cipher suites that are | |
| // composed entirely of NIST approved algorithms" | |
| static const uint16_t kGroups[] = {SSL_GROUP_SECP256R1, SSL_GROUP_SECP384R1}; | |
| static const uint16_t kSigAlgs[] = { | |
| SSL_SIGN_RSA_PKCS1_SHA256, | |
| SSL_SIGN_RSA_PKCS1_SHA384, | |
| SSL_SIGN_RSA_PKCS1_SHA512, | |
| // Table 4.1: | |
| // "The curve should be P-256 or P-384" | |
| SSL_SIGN_ECDSA_SECP256R1_SHA256, | |
| SSL_SIGN_ECDSA_SECP384R1_SHA384, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA256, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA384, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA512, | |
| }; | |
| static const char kTLS12Ciphers[] = | |
| "TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256:" | |
| "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256:" | |
| "TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384:" | |
| "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"; | |
| static const uint16_t kTLS13Ciphers[] = { | |
| SSL_CIPHER_AES_128_GCM_SHA256, | |
| SSL_CIPHER_AES_256_GCM_SHA384, | |
| }; | |
| static const bool kTLS13CiphersInGroup[] = { | |
| true, | |
| false, | |
| }; | |
| static int Configure(SSLContext *ctx) { | |
| ctx->compliance_policy = ssl_compliance_policy_fips_202205; | |
| return | |
| // Section 3.1: | |
| // "Servers that support government-only applications shall be | |
| // configured to use TLS 1.2 and should be configured to use TLS 1.3 | |
| // as well. These servers should not be configured to use TLS 1.1 and | |
| // shall not use TLS 1.0, SSL 3.0, or SSL 2.0. | |
| SSL_CTX_set_min_proto_version(ctx, TLS1_2_VERSION) && | |
| SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION) && | |
| // Sections 3.3.1.1.1 and 3.3.1.1.2 are ambiguous about whether | |
| // HMAC-SHA-1 cipher suites are permitted with TLS 1.2. However, later the | |
| // Encrypt-then-MAC extension is required for all CBC cipher suites and so | |
| // it's easier to drop them. | |
| SSL_CTX_set_strict_cipher_list(ctx, kTLS12Ciphers) && | |
| ctx->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_CTX_set1_group_ids(ctx, kGroups, std::size(kGroups)) && | |
| SSL_CTX_set_signing_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_CTX_set_verify_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| static int Configure(SSLImpl *ssl) { | |
| ssl->config->compliance_policy = ssl_compliance_policy_fips_202205; | |
| // See `Configure(SSL_CTX)`, above, for reasoning. | |
| return SSL_set_min_proto_version(ssl, TLS1_2_VERSION) && | |
| SSL_set_max_proto_version(ssl, TLS1_3_VERSION) && | |
| SSL_set_strict_cipher_list(ssl, kTLS12Ciphers) && | |
| ssl->config->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_set1_group_ids(ssl, kGroups, std::size(kGroups)) && | |
| SSL_set_signing_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_set_verify_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| } // namespace fips202205 | |
| namespace fips202609 { | |
| // (References are to SP 800-52r2): | |
| static const uint16_t kGroups[] = { | |
| SSL_GROUP_X25519_MLKEM768, | |
| SSL_GROUP_MLKEM1024, | |
| SSL_GROUP_SECP256R1, | |
| SSL_GROUP_SECP384R1, | |
| }; | |
| static const uint32_t kGroupsFlags[] = { | |
| SSL_GROUP_FLAG_EQUAL_PREFERENCE_WITH_NEXT, | |
| 0, | |
| 0, | |
| 0, | |
| }; | |
| // Prefer post-quantum groups equally if the client supports them. | |
| static const uint32_t kOptions = SSL_OP_CIPHER_SERVER_PREFERENCE; | |
| static const uint16_t kSigAlgs[] = { | |
| SSL_SIGN_RSA_PKCS1_SHA256, | |
| SSL_SIGN_RSA_PKCS1_SHA384, | |
| SSL_SIGN_RSA_PKCS1_SHA512, | |
| // Table 4.1: | |
| // "The curve should be P-256 or P-384" | |
| SSL_SIGN_ECDSA_SECP256R1_SHA256, | |
| SSL_SIGN_ECDSA_SECP384R1_SHA384, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA256, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA384, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA512, | |
| }; | |
| static const char kTLS12Ciphers[] = | |
| "TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256:" | |
| "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256:" | |
| "TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384:" | |
| "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"; | |
| static const uint16_t kTLS13Ciphers[] = { | |
| SSL_CIPHER_AES_128_GCM_SHA256, | |
| SSL_CIPHER_AES_256_GCM_SHA384, | |
| }; | |
| static const bool kTLS13CiphersInGroup[] = { | |
| true, | |
| false, | |
| }; | |
| static int Configure(SSLContext *ctx) { | |
| ctx->compliance_policy = ssl_compliance_policy_fips_202609; | |
| return | |
| // Section 3.1: | |
| // "Servers that support government-only applications shall be | |
| // configured to use TLS 1.2 and should be configured to use TLS 1.3 | |
| // as well. These servers should not be configured to use TLS 1.1 and | |
| // shall not use TLS 1.0, SSL 3.0, or SSL 2.0. | |
| SSL_CTX_set_min_proto_version(ctx, TLS1_2_VERSION) && | |
| SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION) && | |
| // Sections 3.3.1.1.1 and 3.3.1.1.2 are ambiguous about whether | |
| // HMAC-SHA-1 cipher suites are permitted with TLS 1.2. However, later the | |
| // Encrypt-then-MAC extension is required for all CBC cipher suites and so | |
| // it's easier to drop them. | |
| SSL_CTX_set_strict_cipher_list(ctx, kTLS12Ciphers) && | |
| ctx->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_CTX_set1_group_ids_with_flags(ctx, kGroups, kGroupsFlags, | |
| std::size(kGroups)) && | |
| SSL_CTX_set_options(ctx, kOptions) && | |
| SSL_CTX_set_signing_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_CTX_set_verify_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| static int Configure(SSLImpl *ssl) { | |
| ssl->config->compliance_policy = ssl_compliance_policy_fips_202609; | |
| // See `Configure(SSL_CTX)`, above, for reasoning. | |
| return SSL_set_min_proto_version(ssl, TLS1_2_VERSION) && | |
| SSL_set_max_proto_version(ssl, TLS1_3_VERSION) && | |
| SSL_set_strict_cipher_list(ssl, kTLS12Ciphers) && | |
| ssl->config->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_set1_group_ids_with_flags(ssl, kGroups, kGroupsFlags, | |
| std::size(kGroups)) && | |
| SSL_set_options(ssl, kOptions) && | |
| SSL_set_signing_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_set_verify_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| } // namespace fips202609 | |
| namespace wpa202304 { | |
| // See WPA version 3.1, section 3.5. | |
| static const uint16_t kGroups[] = {SSL_GROUP_SECP384R1}; | |
| static const uint16_t kSigAlgs[] = { | |
| SSL_SIGN_RSA_PKCS1_SHA384, // | |
| SSL_SIGN_RSA_PKCS1_SHA512, // | |
| SSL_SIGN_ECDSA_SECP384R1_SHA384, // | |
| SSL_SIGN_RSA_PSS_RSAE_SHA384, // | |
| SSL_SIGN_RSA_PSS_RSAE_SHA512, // | |
| }; | |
| static const char kTLS12Ciphers[] = | |
| "TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384:" | |
| "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"; | |
| static const uint16_t kTLS13Ciphers[] = { | |
| SSL_CIPHER_AES_256_GCM_SHA384, | |
| }; | |
| static const bool kTLS13CiphersInGroup[] = { | |
| false, | |
| }; | |
| static int Configure(SSLContext *ctx) { | |
| ctx->compliance_policy = ssl_compliance_policy_wpa3_192_202304; | |
| return SSL_CTX_set_min_proto_version(ctx, TLS1_2_VERSION) && | |
| SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION) && | |
| SSL_CTX_set_strict_cipher_list(ctx, kTLS12Ciphers) && | |
| SSL_CTX_set1_group_ids(ctx, kGroups, std::size(kGroups)) && | |
| ctx->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_CTX_set_signing_algorithm_prefs(ctx, kSigAlgs, | |
| std::size(kSigAlgs)) && | |
| SSL_CTX_set_verify_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| static int Configure(SSLImpl *ssl) { | |
| ssl->config->compliance_policy = ssl_compliance_policy_wpa3_192_202304; | |
| return SSL_set_min_proto_version(ssl, TLS1_2_VERSION) && | |
| SSL_set_max_proto_version(ssl, TLS1_3_VERSION) && | |
| SSL_set_strict_cipher_list(ssl, kTLS12Ciphers) && | |
| ssl->config->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_set1_group_ids(ssl, kGroups, std::size(kGroups)) && | |
| SSL_set_signing_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_set_verify_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| } // namespace wpa202304 | |
| namespace cnsa202407 { | |
| static const uint16_t kTLS13Ciphers[] = { | |
| SSL_CIPHER_AES_256_GCM_SHA384, | |
| SSL_CIPHER_AES_128_GCM_SHA256, | |
| SSL_CIPHER_CHACHA20_POLY1305_SHA256, | |
| }; | |
| static const bool kTLS13CiphersInGroup[] = { | |
| false, | |
| false, | |
| false, | |
| }; | |
| static int Configure(SSLContext *ctx) { | |
| ctx->compliance_policy = ssl_compliance_policy_cnsa_202407; | |
| return ctx->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)); | |
| } | |
| static int Configure(SSLImpl *ssl) { | |
| ssl->config->compliance_policy = ssl_compliance_policy_cnsa_202407; | |
| return ssl->config->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)); | |
| } | |
| } // namespace cnsa202407 | |
| namespace cnsa1_202603 { | |
| // Approximates CNSA 1.0 (RFC 9151). | |
| static const uint16_t kGroups[] = {SSL_GROUP_MLKEM1024, SSL_GROUP_SECP384R1}; | |
| // Prefer ML-KEM-1024 if the client supports it. | |
| static const uint32_t kOptions = SSL_OP_CIPHER_SERVER_PREFERENCE; | |
| static const uint16_t kSigAlgs[] = { | |
| SSL_SIGN_ECDSA_SECP384R1_SHA384, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA384, | |
| SSL_SIGN_RSA_PKCS1_SHA384, | |
| }; | |
| static const char kTLS12Ciphers[] = | |
| "TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384:" | |
| "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384:" | |
| "TLS_RSA_WITH_AES_256_GCM_SHA384"; | |
| static const uint16_t kTLS13Ciphers[] = { | |
| SSL_CIPHER_AES_256_GCM_SHA384, | |
| }; | |
| static const bool kTLS13CiphersInGroup[] = { | |
| false, | |
| }; | |
| static int Configure(SSLContext *ctx) { | |
| ctx->compliance_policy = ssl_compliance_policy_cnsa1_202603; | |
| return SSL_CTX_set_min_proto_version(ctx, TLS1_2_VERSION) && | |
| SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION) && | |
| SSL_CTX_set_strict_cipher_list(ctx, kTLS12Ciphers) && | |
| ctx->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_CTX_set1_group_ids(ctx, kGroups, std::size(kGroups)) && | |
| SSL_CTX_set_options(ctx, kOptions) && | |
| SSL_CTX_set_signing_algorithm_prefs(ctx, kSigAlgs, | |
| std::size(kSigAlgs)) && | |
| SSL_CTX_set_verify_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| static int Configure(SSLImpl *ssl) { | |
| ssl->config->compliance_policy = ssl_compliance_policy_cnsa1_202603; | |
| return SSL_set_min_proto_version(ssl, TLS1_2_VERSION) && | |
| SSL_set_max_proto_version(ssl, TLS1_3_VERSION) && | |
| SSL_set_strict_cipher_list(ssl, kTLS12Ciphers) && | |
| ssl->config->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_set1_group_ids(ssl, kGroups, std::size(kGroups)) && | |
| SSL_set_options(ssl, kOptions) && | |
| SSL_set_signing_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_set_verify_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| } // namespace cnsa1_202603 | |
| namespace cnsa2_202603 { | |
| // Approximates CNSA 2.0 (draft-becker-cnsa2-tls-profile). | |
| static const uint16_t kGroups[] = {SSL_GROUP_MLKEM1024}; | |
| static const uint16_t kSigAlgs[] = { | |
| SSL_SIGN_ECDSA_SECP384R1_SHA384, | |
| SSL_SIGN_RSA_PSS_RSAE_SHA384, | |
| SSL_SIGN_RSA_PKCS1_SHA384, | |
| }; | |
| static const uint16_t kTLS13Ciphers[] = { | |
| SSL_CIPHER_AES_256_GCM_SHA384, | |
| }; | |
| static const bool kTLS13CiphersInGroup[] = { | |
| false, | |
| }; | |
| static int Configure(SSLContext *ctx) { | |
| ctx->compliance_policy = ssl_compliance_policy_cnsa2_202603; | |
| return SSL_CTX_set_min_proto_version(ctx, TLS1_3_VERSION) && | |
| SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION) && | |
| ctx->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_CTX_set1_group_ids(ctx, kGroups, std::size(kGroups)) && | |
| SSL_CTX_set_signing_algorithm_prefs(ctx, kSigAlgs, | |
| std::size(kSigAlgs)) && | |
| SSL_CTX_set_verify_algorithm_prefs(ctx, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| static int Configure(SSLImpl *ssl) { | |
| ssl->config->compliance_policy = ssl_compliance_policy_cnsa2_202603; | |
| return SSL_set_min_proto_version(ssl, TLS1_3_VERSION) && | |
| SSL_set_max_proto_version(ssl, TLS1_3_VERSION) && | |
| ssl->config->tls13_cipher_list.Init(Span(kTLS13Ciphers), | |
| Span(kTLS13CiphersInGroup)) && | |
| SSL_set1_group_ids(ssl, kGroups, std::size(kGroups)) && | |
| SSL_set_signing_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)) && | |
| SSL_set_verify_algorithm_prefs(ssl, kSigAlgs, std::size(kSigAlgs)); | |
| } | |
| } // namespace cnsa2_202603 | |
| int SSL_CTX_set_compliance_policy(SSL_CTX *ctx, | |
| enum ssl_compliance_policy_t policy) { | |
| auto *ctx_impl = FromOpaque(ctx); | |
| switch (policy) { | |
| case ssl_compliance_policy_fips_202205: | |
| return fips202205::Configure(ctx_impl); | |
| case ssl_compliance_policy_fips_202609: | |
| return fips202609::Configure(ctx_impl); | |
| case ssl_compliance_policy_wpa3_192_202304: | |
| return wpa202304::Configure(ctx_impl); | |
| case ssl_compliance_policy_cnsa_202407: | |
| return cnsa202407::Configure(ctx_impl); | |
| case ssl_compliance_policy_cnsa1_202603: | |
| return cnsa1_202603::Configure(ctx_impl); | |
| case ssl_compliance_policy_cnsa2_202603: | |
| return cnsa2_202603::Configure(ctx_impl); | |
| default: | |
| return 0; | |
| } | |
| } | |
| enum ssl_compliance_policy_t SSL_CTX_get_compliance_policy(const SSL_CTX *ctx) { | |
| return FromOpaque(ctx)->compliance_policy; | |
| } | |
| int SSL_set_compliance_policy(SSL *ssl, enum ssl_compliance_policy_t policy) { | |
| auto *ssl_impl = FromOpaque(ssl); | |
| switch (policy) { | |
| case ssl_compliance_policy_fips_202205: | |
| return fips202205::Configure(ssl_impl); | |
| case ssl_compliance_policy_fips_202609: | |
| return fips202609::Configure(ssl_impl); | |
| case ssl_compliance_policy_wpa3_192_202304: | |
| return wpa202304::Configure(ssl_impl); | |
| case ssl_compliance_policy_cnsa_202407: | |
| return cnsa202407::Configure(ssl_impl); | |
| case ssl_compliance_policy_cnsa1_202603: | |
| return cnsa1_202603::Configure(ssl_impl); | |
| case ssl_compliance_policy_cnsa2_202603: | |
| return cnsa2_202603::Configure(ssl_impl); | |
| default: | |
| return 0; | |
| } | |
| } | |
| enum ssl_compliance_policy_t SSL_get_compliance_policy(const SSL *ssl) { | |
| return FromOpaque(ssl)->config->compliance_policy; | |
| } | |
| int SSL_peer_matched_trust_anchor(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->hs != nullptr && | |
| FromOpaque(ssl)->s3->hs->peer_matched_trust_anchor; | |
| } | |
| void SSL_get0_peer_available_trust_anchors(const SSL *ssl, const uint8_t **out, | |
| size_t *out_len) { | |
| Span<const uint8_t> ret; | |
| if (SSL_HANDSHAKE *hs = FromOpaque(ssl)->s3->hs.get(); hs != nullptr) { | |
| ret = hs->peer_available_trust_anchors; | |
| } | |
| *out = ret.data(); | |
| *out_len = ret.size(); | |
| } | |
| int SSL_CTX_set1_available_trust_anchors(SSL_CTX *ctx, const uint8_t *ids, | |
| size_t ids_len) { | |
| auto span = Span(ids, ids_len); | |
| if (span.empty() || !ssl_is_valid_trust_anchor_list(span)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_TRUST_ANCHOR_LIST); | |
| return 0; | |
| } | |
| return FromOpaque(ctx)->cert->available_trust_anchors.CopyFrom(span); | |
| } | |
| int SSL_set1_available_trust_anchors(SSL *ssl, const uint8_t *ids, | |
| size_t ids_len) { | |
| if (!FromOpaque(ssl)->config) { | |
| return 0; | |
| } | |
| auto span = Span(ids, ids_len); | |
| if (span.empty() || !ssl_is_valid_trust_anchor_list(span)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_TRUST_ANCHOR_LIST); | |
| return 0; | |
| } | |
| return FromOpaque(ssl)->config->cert->available_trust_anchors.CopyFrom(span); | |
| } | |
| int SSL_CTX_set1_requested_trust_anchors(SSL_CTX *ctx, const uint8_t *ids, | |
| size_t ids_len) { | |
| auto span = Span(ids, ids_len); | |
| if (!ssl_is_valid_trust_anchor_list(span)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_TRUST_ANCHOR_LIST); | |
| return 0; | |
| } | |
| Array<uint8_t> copy; | |
| if (!copy.CopyFrom(span)) { | |
| return 0; | |
| } | |
| FromOpaque(ctx)->requested_trust_anchors = std::move(copy); | |
| return 1; | |
| } | |
| int SSL_set1_requested_trust_anchors(SSL *ssl, const uint8_t *ids, | |
| size_t ids_len) { | |
| if (!FromOpaque(ssl)->config) { | |
| return 0; | |
| } | |
| auto span = Span(ids, ids_len); | |
| if (!ssl_is_valid_trust_anchor_list(span)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_TRUST_ANCHOR_LIST); | |
| return 0; | |
| } | |
| Array<uint8_t> copy; | |
| if (!copy.CopyFrom(span)) { | |
| return 0; | |
| } | |
| FromOpaque(ssl)->config->requested_trust_anchors = std::move(copy); | |
| return 1; | |
| } | |
| int SSL_CTX_get_security_level(const SSL_CTX *ctx) { return 0; } | |
| static bool is_valid_cert_types_list(Span<const uint8_t> list) { | |
| if (list.empty() || list.size() > kNumCertTypes) { | |
| return false; | |
| } | |
| for (size_t i = 0u; i < list.size(); ++i) { | |
| // Check that each value is a recognized cert type. | |
| if (std::find(std::begin(kAllCertTypes), std::end(kAllCertTypes), | |
| list[i]) == std::end(kAllCertTypes)) { | |
| return false; | |
| } | |
| // Reject duplicates. | |
| for (size_t j = 0u; j < i; ++j) { | |
| if (list[i] == list[j]) { | |
| return false; | |
| } | |
| } | |
| } | |
| return true; | |
| } | |
| static bool set1_cert_types(InplaceVector<uint8_t, kNumCertTypes> *out, | |
| Span<const uint8_t> values) { | |
| if (!is_valid_cert_types_list(values)) { | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_INVALID_CERT_TYPES_LIST); | |
| return false; | |
| } | |
| out->CopyFrom(values); | |
| return true; | |
| } | |
| int SSL_CTX_set1_accepted_peer_cert_types(SSL_CTX *ctx, const uint8_t *values, | |
| size_t num_values) { | |
| return set1_cert_types(&FromOpaque(ctx)->accepted_peer_cert_types, | |
| Span(values, num_values)); | |
| } | |
| int SSL_set1_accepted_peer_cert_types(SSL *ssl, const uint8_t *values, | |
| size_t num_values) { | |
| if (!FromOpaque(ssl)->config) { | |
| return 0; | |
| } | |
| return set1_cert_types(&FromOpaque(ssl)->config->accepted_peer_cert_types, | |
| Span(values, num_values)); | |
| } | |
| int SSL_CTX_set1_available_client_cert_types(SSL_CTX *ctx, | |
| const uint8_t *values, | |
| size_t num_values) { | |
| return set1_cert_types(&FromOpaque(ctx)->available_client_cert_types, | |
| Span(values, num_values)); | |
| } | |
| int SSL_set1_available_client_cert_types(SSL *ssl, const uint8_t *values, | |
| size_t num_values) { | |
| if (!FromOpaque(ssl)->config) { | |
| return 0; | |
| } | |
| return set1_cert_types(&FromOpaque(ssl)->config->available_client_cert_types, | |
| Span(values, num_values)); | |
| } | |
| int SSL_get_peer_cert_type(const SSL *ssl) { | |
| if (const SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| session != nullptr) { | |
| return session->peer_cert_type; | |
| } | |
| return kDefaultCertType; | |
| } | |
| EVP_PKEY *SSL_get0_peer_rpk(const SSL *ssl) { | |
| if (const SSLSession *session = ssl_get_session(FromOpaque(ssl)); | |
| session != nullptr) { | |
| return session->peer_raw_public_key.get(); | |
| } | |
| return nullptr; | |
| } | |
| void SSL_set_server_padding_request(SSL *ssl, uint16_t num_bytes) { | |
| if (!FromOpaque(ssl)->config) { | |
| return; | |
| } | |
| FromOpaque(ssl)->config->server_padding_request = num_bytes; | |
| } | |
| void SSL_set_server_padding_enabled(SSL *ssl, int enabled) { | |
| if (!FromOpaque(ssl)->config) { | |
| return; | |
| } | |
| FromOpaque(ssl)->config->server_padding_enabled = enabled; | |
| } | |
| int SSL_server_sent_requested_padding(const SSL *ssl) { | |
| return FromOpaque(ssl)->s3->server_sent_requested_padding; | |
| } |