|  | // Copyright 2015 The Chromium Authors | 
|  | // Use of this source code is governed by a BSD-style license that can be | 
|  | // found in the LICENSE file. | 
|  |  | 
|  | #include "parse_values.h" | 
|  |  | 
|  | #include <stdlib.h> | 
|  |  | 
|  | #include <tuple> | 
|  |  | 
|  | #include <openssl/base.h> | 
|  | #include <openssl/bytestring.h> | 
|  | #include <openssl/mem.h> | 
|  |  | 
|  | BSSL_NAMESPACE_BEGIN | 
|  | namespace der { | 
|  |  | 
|  | namespace { | 
|  |  | 
|  | bool ParseBoolInternal(Input in, bool *out, bool relaxed) { | 
|  | // According to ITU-T X.690 section 8.2, a bool is encoded as a single octet | 
|  | // where the octet of all zeroes is FALSE and a non-zero value for the octet | 
|  | // is TRUE. | 
|  | if (in.size() != 1) { | 
|  | return false; | 
|  | } | 
|  | ByteReader data(in); | 
|  | uint8_t byte; | 
|  | if (!data.ReadByte(&byte)) { | 
|  | return false; | 
|  | } | 
|  | if (byte == 0) { | 
|  | *out = false; | 
|  | return true; | 
|  | } | 
|  | // ITU-T X.690 section 11.1 specifies that for DER, the TRUE value must be | 
|  | // encoded as an octet of all ones. | 
|  | if (byte == 0xff || relaxed) { | 
|  | *out = true; | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Reads a positive decimal number with |digits| digits and stores it in | 
|  | // |*out|. This function does not check that the type of |*out| is large | 
|  | // enough to hold 10^digits - 1; the caller must choose an appropriate type | 
|  | // based on the number of digits they wish to parse. | 
|  | template <typename UINT> | 
|  | bool DecimalStringToUint(ByteReader &in, size_t digits, UINT *out) { | 
|  | UINT value = 0; | 
|  | for (size_t i = 0; i < digits; ++i) { | 
|  | uint8_t digit; | 
|  | if (!in.ReadByte(&digit)) { | 
|  | return false; | 
|  | } | 
|  | if (digit < '0' || digit > '9') { | 
|  | return false; | 
|  | } | 
|  | value = (value * 10) + (digit - '0'); | 
|  | } | 
|  | *out = value; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | // Checks that the values in a GeneralizedTime struct are valid. This involves | 
|  | // checking that the year is 4 digits, the month is between 1 and 12, the day | 
|  | // is a day that exists in that month (following current leap year rules), | 
|  | // hours are between 0 and 23, minutes between 0 and 59, and seconds between | 
|  | // 0 and 60 (to allow for leap seconds; no validation is done that a leap | 
|  | // second is on a day that could be a leap second). | 
|  | bool ValidateGeneralizedTime(const GeneralizedTime &time) { | 
|  | if (time.month < 1 || time.month > 12) { | 
|  | return false; | 
|  | } | 
|  | if (time.day < 1) { | 
|  | return false; | 
|  | } | 
|  | if (time.hours > 23) { | 
|  | return false; | 
|  | } | 
|  | if (time.minutes > 59) { | 
|  | return false; | 
|  | } | 
|  | // Leap seconds are allowed. | 
|  | if (time.seconds > 60) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // validate upper bound for day of month | 
|  | switch (time.month) { | 
|  | case 4: | 
|  | case 6: | 
|  | case 9: | 
|  | case 11: | 
|  | if (time.day > 30) { | 
|  | return false; | 
|  | } | 
|  | break; | 
|  | case 1: | 
|  | case 3: | 
|  | case 5: | 
|  | case 7: | 
|  | case 8: | 
|  | case 10: | 
|  | case 12: | 
|  | if (time.day > 31) { | 
|  | return false; | 
|  | } | 
|  | break; | 
|  | case 2: | 
|  | if (time.year % 4 == 0 && | 
|  | (time.year % 100 != 0 || time.year % 400 == 0)) { | 
|  | if (time.day > 29) { | 
|  | return false; | 
|  | } | 
|  | } else { | 
|  | if (time.day > 28) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | break; | 
|  | default: | 
|  | abort(); | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | // Returns the number of bytes of numeric precision in a DER encoded INTEGER | 
|  | // value. |in| must be a valid DER encoding of an INTEGER for this to work. | 
|  | // | 
|  | // Normally the precision of the number is exactly in.size(). However when | 
|  | // encoding positive numbers using DER it is possible to have a leading zero | 
|  | // (to prevent number from being interpreted as negative). | 
|  | // | 
|  | // For instance a 160-bit positive number might take 21 bytes to encode. This | 
|  | // function will return 20 in such a case. | 
|  | size_t GetUnsignedIntegerLength(Input in) { | 
|  | der::ByteReader reader(in); | 
|  | uint8_t first_byte; | 
|  | if (!reader.ReadByte(&first_byte)) { | 
|  | return 0;  // Not valid DER  as |in| was empty. | 
|  | } | 
|  |  | 
|  | if (first_byte == 0 && in.size() > 1) { | 
|  | return in.size() - 1; | 
|  | } | 
|  | return in.size(); | 
|  | } | 
|  |  | 
|  | }  // namespace | 
|  |  | 
|  | bool ParseBool(Input in, bool *out) { | 
|  | return ParseBoolInternal(in, out, false /* relaxed */); | 
|  | } | 
|  |  | 
|  | // BER interprets any non-zero value as true, while DER requires a bool to | 
|  | // have either all bits zero (false) or all bits one (true). To support | 
|  | // malformed certs, we recognized the BER encoding instead of failing to | 
|  | // parse. | 
|  | bool ParseBoolRelaxed(Input in, bool *out) { | 
|  | return ParseBoolInternal(in, out, true /* relaxed */); | 
|  | } | 
|  |  | 
|  | // ITU-T X.690 section 8.3.2 specifies that an integer value must be encoded | 
|  | // in the smallest number of octets. If the encoding consists of more than | 
|  | // one octet, then the bits of the first octet and the most significant bit | 
|  | // of the second octet must not be all zeroes or all ones. | 
|  | bool IsValidInteger(Input in, bool *negative) { | 
|  | CBS cbs; | 
|  | CBS_init(&cbs, in.data(), in.size()); | 
|  | int negative_int; | 
|  | if (!CBS_is_valid_asn1_integer(&cbs, &negative_int)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | *negative = !!negative_int; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseUint64(Input in, uint64_t *out) { | 
|  | // Reject non-minimally encoded numbers and negative numbers. | 
|  | bool negative; | 
|  | if (!IsValidInteger(in, &negative) || negative) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Reject (non-negative) integers whose value would overflow the output type. | 
|  | if (GetUnsignedIntegerLength(in) > sizeof(*out)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ByteReader reader(in); | 
|  | uint8_t data; | 
|  | uint64_t value = 0; | 
|  |  | 
|  | while (reader.ReadByte(&data)) { | 
|  | value <<= 8; | 
|  | value |= data; | 
|  | } | 
|  | *out = value; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseUint8(Input in, uint8_t *out) { | 
|  | // TODO(eroman): Implement this more directly. | 
|  | uint64_t value; | 
|  | if (!ParseUint64(in, &value)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (value > 0xFF) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | *out = static_cast<uint8_t>(value); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | BitString::BitString(Input bytes, uint8_t unused_bits) | 
|  | : bytes_(bytes), unused_bits_(unused_bits) { | 
|  | BSSL_CHECK(unused_bits < 8); | 
|  | BSSL_CHECK(unused_bits == 0 || !bytes.empty()); | 
|  | // The unused bits must be zero. | 
|  | BSSL_CHECK(bytes.empty() || (bytes.back() & ((1u << unused_bits) - 1)) == 0); | 
|  | } | 
|  |  | 
|  | bool BitString::AssertsBit(size_t bit_index) const { | 
|  | // Index of the byte that contains the bit. | 
|  | size_t byte_index = bit_index / 8; | 
|  |  | 
|  | // If the bit is outside of the bitstring, by definition it is not | 
|  | // asserted. | 
|  | if (byte_index >= bytes_.size()) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | // Within a byte, bits are ordered from most significant to least significant. | 
|  | // Convert |bit_index| to an index within the |byte_index| byte, measured from | 
|  | // its least significant bit. | 
|  | uint8_t bit_index_in_byte = 7 - (bit_index - byte_index * 8); | 
|  |  | 
|  | // BIT STRING parsing already guarantees that unused bits in a byte are zero | 
|  | // (otherwise it wouldn't be valid DER). Therefore it isn't necessary to check | 
|  | // |unused_bits_| | 
|  | uint8_t byte = bytes_[byte_index]; | 
|  | return 0 != (byte & (1 << bit_index_in_byte)); | 
|  | } | 
|  |  | 
|  | std::optional<BitString> ParseBitString(Input in) { | 
|  | ByteReader reader(in); | 
|  |  | 
|  | // From ITU-T X.690, section 8.6.2.2 (applies to BER, CER, DER): | 
|  | // | 
|  | // The initial octet shall encode, as an unsigned binary integer with | 
|  | // bit 1 as the least significant bit, the number of unused bits in the final | 
|  | // subsequent octet. The number shall be in the range zero to seven. | 
|  | uint8_t unused_bits; | 
|  | if (!reader.ReadByte(&unused_bits)) { | 
|  | return std::nullopt; | 
|  | } | 
|  | if (unused_bits > 7) { | 
|  | return std::nullopt; | 
|  | } | 
|  |  | 
|  | Input bytes; | 
|  | if (!reader.ReadBytes(reader.BytesLeft(), &bytes)) { | 
|  | return std::nullopt;  // Not reachable. | 
|  | } | 
|  |  | 
|  | // Ensure that unused bits in the last byte are set to 0. | 
|  | if (unused_bits > 0) { | 
|  | // From ITU-T X.690, section 8.6.2.3 (applies to BER, CER, DER): | 
|  | // | 
|  | // If the bitstring is empty, there shall be no subsequent octets, | 
|  | // and the initial octet shall be zero. | 
|  | if (bytes.empty()) { | 
|  | return std::nullopt; | 
|  | } | 
|  | uint8_t last_byte = bytes.back(); | 
|  |  | 
|  | // From ITU-T X.690, section 11.2.1 (applies to CER and DER, but not BER): | 
|  | // | 
|  | // Each unused bit in the final octet of the encoding of a bit string value | 
|  | // shall be set to zero. | 
|  | uint8_t mask = 0xFF >> (8 - unused_bits); | 
|  | if ((mask & last_byte) != 0) { | 
|  | return std::nullopt; | 
|  | } | 
|  | } | 
|  |  | 
|  | return BitString(bytes, unused_bits); | 
|  | } | 
|  |  | 
|  | bool GeneralizedTime::InUTCTimeRange() const { | 
|  | return 1950 <= year && year < 2050; | 
|  | } | 
|  |  | 
|  | bool operator<(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { | 
|  | return std::tie(lhs.year, lhs.month, lhs.day, lhs.hours, lhs.minutes, | 
|  | lhs.seconds) < std::tie(rhs.year, rhs.month, rhs.day, | 
|  | rhs.hours, rhs.minutes, rhs.seconds); | 
|  | } | 
|  |  | 
|  | bool operator>(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { | 
|  | return rhs < lhs; | 
|  | } | 
|  |  | 
|  | bool operator<=(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { | 
|  | return !(lhs > rhs); | 
|  | } | 
|  |  | 
|  | bool operator>=(const GeneralizedTime &lhs, const GeneralizedTime &rhs) { | 
|  | return !(lhs < rhs); | 
|  | } | 
|  |  | 
|  | bool ParseUTCTime(Input in, GeneralizedTime *value) { | 
|  | ByteReader reader(in); | 
|  | GeneralizedTime time; | 
|  | if (!DecimalStringToUint(reader, 2, &time.year) || | 
|  | !DecimalStringToUint(reader, 2, &time.month) || | 
|  | !DecimalStringToUint(reader, 2, &time.day) || | 
|  | !DecimalStringToUint(reader, 2, &time.hours) || | 
|  | !DecimalStringToUint(reader, 2, &time.minutes) || | 
|  | !DecimalStringToUint(reader, 2, &time.seconds)) { | 
|  | return false; | 
|  | } | 
|  | uint8_t zulu; | 
|  | if (!reader.ReadByte(&zulu) || zulu != 'Z' || reader.HasMore()) { | 
|  | return false; | 
|  | } | 
|  | if (time.year < 50) { | 
|  | time.year += 2000; | 
|  | } else { | 
|  | time.year += 1900; | 
|  | } | 
|  | if (!ValidateGeneralizedTime(time)) { | 
|  | return false; | 
|  | } | 
|  | *value = time; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseGeneralizedTime(Input in, GeneralizedTime *value) { | 
|  | ByteReader reader(in); | 
|  | GeneralizedTime time; | 
|  | if (!DecimalStringToUint(reader, 4, &time.year) || | 
|  | !DecimalStringToUint(reader, 2, &time.month) || | 
|  | !DecimalStringToUint(reader, 2, &time.day) || | 
|  | !DecimalStringToUint(reader, 2, &time.hours) || | 
|  | !DecimalStringToUint(reader, 2, &time.minutes) || | 
|  | !DecimalStringToUint(reader, 2, &time.seconds)) { | 
|  | return false; | 
|  | } | 
|  | uint8_t zulu; | 
|  | if (!reader.ReadByte(&zulu) || zulu != 'Z' || reader.HasMore()) { | 
|  | return false; | 
|  | } | 
|  | if (!ValidateGeneralizedTime(time)) { | 
|  | return false; | 
|  | } | 
|  | *value = time; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseIA5String(Input in, std::string *out) { | 
|  | for (uint8_t c : in) { | 
|  | if (c > 127) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | *out = BytesAsStringView(in); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseVisibleString(Input in, std::string *out) { | 
|  | // ITU-T X.680: | 
|  | // VisibleString : "Defining registration number 6" + SPACE | 
|  | // 6 includes all the characters from '!' .. '~' (33 .. 126), space is 32. | 
|  | // Also ITU-T X.691 says it much more clearly: | 
|  | // "for VisibleString [the range] is 32 to 126 ... For VisibleString .. all | 
|  | // the values in the range are present." | 
|  | for (uint8_t c : in) { | 
|  | if (c < 32 || c > 126) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | *out = BytesAsStringView(in); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParsePrintableString(Input in, std::string *out) { | 
|  | for (uint8_t c : in) { | 
|  | if (!(OPENSSL_isalpha(c) || c == ' ' || (c >= '\'' && c <= ':') || | 
|  | c == '=' || c == '?')) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | *out = BytesAsStringView(in); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseTeletexStringAsLatin1(Input in, std::string *out) { | 
|  | out->clear(); | 
|  | // Convert from Latin-1 to UTF-8. | 
|  | size_t utf8_length = in.size(); | 
|  | for (size_t i = 0; i < in.size(); i++) { | 
|  | if (in[i] > 0x7f) { | 
|  | utf8_length++; | 
|  | } | 
|  | } | 
|  | out->reserve(utf8_length); | 
|  | for (size_t i = 0; i < in.size(); i++) { | 
|  | uint8_t u = in[i]; | 
|  | if (u <= 0x7f) { | 
|  | out->push_back(u); | 
|  | } else { | 
|  | out->push_back(0xc0 | (u >> 6)); | 
|  | out->push_back(0x80 | (u & 0x3f)); | 
|  | } | 
|  | } | 
|  | BSSL_CHECK(utf8_length == out->size()); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseUniversalString(Input in, std::string *out) { | 
|  | if (in.size() % 4 != 0) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | CBS cbs; | 
|  | CBS_init(&cbs, in.data(), in.size()); | 
|  | bssl::ScopedCBB cbb; | 
|  | if (!CBB_init(cbb.get(), in.size())) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | while (CBS_len(&cbs) != 0) { | 
|  | uint32_t c; | 
|  | if (!CBS_get_utf32_be(&cbs, &c) ||  // | 
|  | !CBB_add_utf8(cbb.get(), c)) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | out->assign(CBB_data(cbb.get()), CBB_data(cbb.get()) + CBB_len(cbb.get())); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ParseBmpString(Input in, std::string *out) { | 
|  | if (in.size() % 2 != 0) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | CBS cbs; | 
|  | CBS_init(&cbs, in.data(), in.size()); | 
|  | bssl::ScopedCBB cbb; | 
|  | if (!CBB_init(cbb.get(), in.size())) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | while (CBS_len(&cbs) != 0) { | 
|  | uint32_t c; | 
|  | if (!CBS_get_ucs2_be(&cbs, &c) ||  // | 
|  | !CBB_add_utf8(cbb.get(), c)) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | out->assign(CBB_data(cbb.get()), CBB_data(cbb.get()) + CBB_len(cbb.get())); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | }  // namespace der | 
|  | BSSL_NAMESPACE_END |