| #! /usr/bin/env perl | |
| # Copyright 1998-2016 The OpenSSL Project Authors. All Rights Reserved. | |
| # | |
| # Licensed under the OpenSSL license (the "License"). You may not use | |
| # this file except in compliance with the License. You can obtain a copy | |
| # in the file LICENSE in the source distribution or at | |
| # https://www.openssl.org/source/license.html | |
| # ==================================================================== | |
| # [Re]written by Andy Polyakov <appro@openssl.org> for the OpenSSL | |
| # project. The module is, however, dual licensed under OpenSSL and | |
| # CRYPTOGAMS licenses depending on where you obtain it. For further | |
| # details see http://www.openssl.org/~appro/cryptogams/. | |
| # ==================================================================== | |
| # "[Re]written" was achieved in two major overhauls. In 2004 BODY_* | |
| # functions were re-implemented to address P4 performance issue [see | |
| # commentary below], and in 2006 the rest was rewritten in order to | |
| # gain freedom to liberate licensing terms. | |
| # January, September 2004. | |
| # | |
| # It was noted that Intel IA-32 C compiler generates code which | |
| # performs ~30% *faster* on P4 CPU than original *hand-coded* | |
| # SHA1 assembler implementation. To address this problem (and | |
| # prove that humans are still better than machines:-), the | |
| # original code was overhauled, which resulted in following | |
| # performance changes: | |
| # | |
| # compared with original compared with Intel cc | |
| # assembler impl. generated code | |
| # Pentium -16% +48% | |
| # PIII/AMD +8% +16% | |
| # P4 +85%(!) +45% | |
| # | |
| # As you can see Pentium came out as looser:-( Yet I reckoned that | |
| # improvement on P4 outweighs the loss and incorporate this | |
| # re-tuned code to 0.9.7 and later. | |
| # ---------------------------------------------------------------- | |
| # August 2009. | |
| # | |
| # George Spelvin has tipped that F_40_59(b,c,d) can be rewritten as | |
| # '(c&d) + (b&(c^d))', which allows to accumulate partial results | |
| # and lighten "pressure" on scratch registers. This resulted in | |
| # >12% performance improvement on contemporary AMD cores (with no | |
| # degradation on other CPUs:-). Also, the code was revised to maximize | |
| # "distance" between instructions producing input to 'lea' instruction | |
| # and the 'lea' instruction itself, which is essential for Intel Atom | |
| # core and resulted in ~15% improvement. | |
| # October 2010. | |
| # | |
| # Add SSSE3, Supplemental[!] SSE3, implementation. The idea behind it | |
| # is to offload message schedule denoted by Wt in NIST specification, | |
| # or Xupdate in OpenSSL source, to SIMD unit. The idea is not novel, | |
| # and in SSE2 context was first explored by Dean Gaudet in 2004, see | |
| # http://arctic.org/~dean/crypto/sha1.html. Since then several things | |
| # have changed that made it interesting again: | |
| # | |
| # a) XMM units became faster and wider; | |
| # b) instruction set became more versatile; | |
| # c) an important observation was made by Max Locktykhin, which made | |
| # it possible to reduce amount of instructions required to perform | |
| # the operation in question, for further details see | |
| # http://software.intel.com/en-us/articles/improving-the-performance-of-the-secure-hash-algorithm-1/. | |
| # April 2011. | |
| # | |
| # Add AVX code path, probably most controversial... The thing is that | |
| # switch to AVX alone improves performance by as little as 4% in | |
| # comparison to SSSE3 code path. But below result doesn't look like | |
| # 4% improvement... Trouble is that Sandy Bridge decodes 'ro[rl]' as | |
| # pair of µ-ops, and it's the additional µ-ops, two per round, that | |
| # make it run slower than Core2 and Westmere. But 'sh[rl]d' is decoded | |
| # as single µ-op by Sandy Bridge and it's replacing 'ro[rl]' with | |
| # equivalent 'sh[rl]d' that is responsible for the impressive 5.1 | |
| # cycles per processed byte. But 'sh[rl]d' is not something that used | |
| # to be fast, nor does it appear to be fast in upcoming Bulldozer | |
| # [according to its optimization manual]. Which is why AVX code path | |
| # is guarded by *both* AVX and synthetic bit denoting Intel CPUs. | |
| # One can argue that it's unfair to AMD, but without 'sh[rl]d' it | |
| # makes no sense to keep the AVX code path. If somebody feels that | |
| # strongly, it's probably more appropriate to discuss possibility of | |
| # using vector rotate XOP on AMD... | |
| # March 2014. | |
| # | |
| # Add support for Intel SHA Extensions. | |
| ###################################################################### | |
| # Current performance is summarized in following table. Numbers are | |
| # CPU clock cycles spent to process single byte (less is better). | |
| # | |
| # x86 SSSE3 AVX | |
| # Pentium 15.7 - | |
| # PIII 11.5 - | |
| # P4 10.6 - | |
| # AMD K8 7.1 - | |
| # Core2 7.3 6.0/+22% - | |
| # Westmere 7.3 5.5/+33% - | |
| # Sandy Bridge 8.8 6.2/+40% 5.1(**)/+73% | |
| # Ivy Bridge 7.2 4.8/+51% 4.7(**)/+53% | |
| # Haswell 6.5 4.3/+51% 4.1(**)/+58% | |
| # Skylake 6.4 4.1/+55% 4.1(**)/+55% | |
| # Bulldozer 11.6 6.0/+92% | |
| # VIA Nano 10.6 7.5/+41% | |
| # Atom 12.5 9.3(*)/+35% | |
| # Silvermont 14.5 9.9(*)/+46% | |
| # Goldmont 8.8 6.7/+30% 1.7(***)/+415% | |
| # | |
| # (*) Loop is 1056 instructions long and expected result is ~8.25. | |
| # The discrepancy is because of front-end limitations, so | |
| # called MS-ROM penalties, and on Silvermont even rotate's | |
| # limited parallelism. | |
| # | |
| # (**) As per above comment, the result is for AVX *plus* sh[rl]d. | |
| # | |
| # (***) SHAEXT result | |
| $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; | |
| push(@INC,"${dir}","${dir}../../../perlasm"); | |
| require "x86asm.pl"; | |
| $output=pop; | |
| open STDOUT,">$output"; | |
| &asm_init($ARGV[0],$ARGV[$#ARGV] eq "386"); | |
| $xmm=$ymm=0; | |
| for (@ARGV) { $xmm=1 if (/-DOPENSSL_IA32_SSE2/); } | |
| # In upstream, this is controlled by shelling out to the compiler to check | |
| # versions, but BoringSSL is intended to be used with pre-generated perlasm | |
| # output, so this isn't useful anyway. | |
| $ymm = 1; | |
| $ymm = 0 unless ($xmm); | |
| $shaext=$xmm; ### set to zero if compiling for 1.0.1 | |
| # TODO(davidben): Consider enabling the Intel SHA Extensions code once it's | |
| # been tested. | |
| $shaext = 0; | |
| &external_label("OPENSSL_ia32cap_P") if ($xmm); | |
| $A="eax"; | |
| $B="ebx"; | |
| $C="ecx"; | |
| $D="edx"; | |
| $E="edi"; | |
| $T="esi"; | |
| $tmp1="ebp"; | |
| @V=($A,$B,$C,$D,$E,$T); | |
| $alt=0; # 1 denotes alternative IALU implementation, which performs | |
| # 8% *worse* on P4, same on Westmere and Atom, 2% better on | |
| # Sandy Bridge... | |
| sub BODY_00_15 | |
| { | |
| local($n,$a,$b,$c,$d,$e,$f)=@_; | |
| &comment("00_15 $n"); | |
| &mov($f,$c); # f to hold F_00_19(b,c,d) | |
| if ($n==0) { &mov($tmp1,$a); } | |
| else { &mov($a,$tmp1); } | |
| &rotl($tmp1,5); # tmp1=ROTATE(a,5) | |
| &xor($f,$d); | |
| &add($tmp1,$e); # tmp1+=e; | |
| &mov($e,&swtmp($n%16)); # e becomes volatile and is loaded | |
| # with xi, also note that e becomes | |
| # f in next round... | |
| &and($f,$b); | |
| &rotr($b,2); # b=ROTATE(b,30) | |
| &xor($f,$d); # f holds F_00_19(b,c,d) | |
| &lea($tmp1,&DWP(0x5a827999,$tmp1,$e)); # tmp1+=K_00_19+xi | |
| if ($n==15) { &mov($e,&swtmp(($n+1)%16));# pre-fetch f for next round | |
| &add($f,$tmp1); } # f+=tmp1 | |
| else { &add($tmp1,$f); } # f becomes a in next round | |
| &mov($tmp1,$a) if ($alt && $n==15); | |
| } | |
| sub BODY_16_19 | |
| { | |
| local($n,$a,$b,$c,$d,$e,$f)=@_; | |
| &comment("16_19 $n"); | |
| if ($alt) { | |
| &xor($c,$d); | |
| &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) | |
| &and($tmp1,$c); # tmp1 to hold F_00_19(b,c,d), b&=c^d | |
| &xor($f,&swtmp(($n+8)%16)); | |
| &xor($tmp1,$d); # tmp1=F_00_19(b,c,d) | |
| &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd | |
| &rotl($f,1); # f=ROTATE(f,1) | |
| &add($e,$tmp1); # e+=F_00_19(b,c,d) | |
| &xor($c,$d); # restore $c | |
| &mov($tmp1,$a); # b in next round | |
| &rotr($b,$n==16?2:7); # b=ROTATE(b,30) | |
| &mov(&swtmp($n%16),$f); # xi=f | |
| &rotl($a,5); # ROTATE(a,5) | |
| &lea($f,&DWP(0x5a827999,$f,$e));# f+=F_00_19(b,c,d)+e | |
| &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round | |
| &add($f,$a); # f+=ROTATE(a,5) | |
| } else { | |
| &mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d) | |
| &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) | |
| &xor($tmp1,$d); | |
| &xor($f,&swtmp(($n+8)%16)); | |
| &and($tmp1,$b); | |
| &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd | |
| &rotl($f,1); # f=ROTATE(f,1) | |
| &xor($tmp1,$d); # tmp1=F_00_19(b,c,d) | |
| &add($e,$tmp1); # e+=F_00_19(b,c,d) | |
| &mov($tmp1,$a); | |
| &rotr($b,2); # b=ROTATE(b,30) | |
| &mov(&swtmp($n%16),$f); # xi=f | |
| &rotl($tmp1,5); # ROTATE(a,5) | |
| &lea($f,&DWP(0x5a827999,$f,$e));# f+=F_00_19(b,c,d)+e | |
| &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round | |
| &add($f,$tmp1); # f+=ROTATE(a,5) | |
| } | |
| } | |
| sub BODY_20_39 | |
| { | |
| local($n,$a,$b,$c,$d,$e,$f)=@_; | |
| local $K=($n<40)?0x6ed9eba1:0xca62c1d6; | |
| &comment("20_39 $n"); | |
| if ($alt) { | |
| &xor($tmp1,$c); # tmp1 to hold F_20_39(b,c,d), b^=c | |
| &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) | |
| &xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d) | |
| &xor($f,&swtmp(($n+8)%16)); | |
| &add($e,$tmp1); # e+=F_20_39(b,c,d) | |
| &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd | |
| &rotl($f,1); # f=ROTATE(f,1) | |
| &mov($tmp1,$a); # b in next round | |
| &rotr($b,7); # b=ROTATE(b,30) | |
| &mov(&swtmp($n%16),$f) if($n<77);# xi=f | |
| &rotl($a,5); # ROTATE(a,5) | |
| &xor($b,$c) if($n==39);# warm up for BODY_40_59 | |
| &and($tmp1,$b) if($n==39); | |
| &lea($f,&DWP($K,$f,$e)); # f+=e+K_XX_YY | |
| &mov($e,&swtmp(($n+1)%16)) if($n<79);# pre-fetch f for next round | |
| &add($f,$a); # f+=ROTATE(a,5) | |
| &rotr($a,5) if ($n==79); | |
| } else { | |
| &mov($tmp1,$b); # tmp1 to hold F_20_39(b,c,d) | |
| &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) | |
| &xor($tmp1,$c); | |
| &xor($f,&swtmp(($n+8)%16)); | |
| &xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d) | |
| &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd | |
| &rotl($f,1); # f=ROTATE(f,1) | |
| &add($e,$tmp1); # e+=F_20_39(b,c,d) | |
| &rotr($b,2); # b=ROTATE(b,30) | |
| &mov($tmp1,$a); | |
| &rotl($tmp1,5); # ROTATE(a,5) | |
| &mov(&swtmp($n%16),$f) if($n<77);# xi=f | |
| &lea($f,&DWP($K,$f,$e)); # f+=e+K_XX_YY | |
| &mov($e,&swtmp(($n+1)%16)) if($n<79);# pre-fetch f for next round | |
| &add($f,$tmp1); # f+=ROTATE(a,5) | |
| } | |
| } | |
| sub BODY_40_59 | |
| { | |
| local($n,$a,$b,$c,$d,$e,$f)=@_; | |
| &comment("40_59 $n"); | |
| if ($alt) { | |
| &add($e,$tmp1); # e+=b&(c^d) | |
| &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) | |
| &mov($tmp1,$d); | |
| &xor($f,&swtmp(($n+8)%16)); | |
| &xor($c,$d); # restore $c | |
| &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd | |
| &rotl($f,1); # f=ROTATE(f,1) | |
| &and($tmp1,$c); | |
| &rotr($b,7); # b=ROTATE(b,30) | |
| &add($e,$tmp1); # e+=c&d | |
| &mov($tmp1,$a); # b in next round | |
| &mov(&swtmp($n%16),$f); # xi=f | |
| &rotl($a,5); # ROTATE(a,5) | |
| &xor($b,$c) if ($n<59); | |
| &and($tmp1,$b) if ($n<59);# tmp1 to hold F_40_59(b,c,d) | |
| &lea($f,&DWP(0x8f1bbcdc,$f,$e));# f+=K_40_59+e+(b&(c^d)) | |
| &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round | |
| &add($f,$a); # f+=ROTATE(a,5) | |
| } else { | |
| &mov($tmp1,$c); # tmp1 to hold F_40_59(b,c,d) | |
| &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd) | |
| &xor($tmp1,$d); | |
| &xor($f,&swtmp(($n+8)%16)); | |
| &and($tmp1,$b); | |
| &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd | |
| &rotl($f,1); # f=ROTATE(f,1) | |
| &add($tmp1,$e); # b&(c^d)+=e | |
| &rotr($b,2); # b=ROTATE(b,30) | |
| &mov($e,$a); # e becomes volatile | |
| &rotl($e,5); # ROTATE(a,5) | |
| &mov(&swtmp($n%16),$f); # xi=f | |
| &lea($f,&DWP(0x8f1bbcdc,$f,$tmp1));# f+=K_40_59+e+(b&(c^d)) | |
| &mov($tmp1,$c); | |
| &add($f,$e); # f+=ROTATE(a,5) | |
| &and($tmp1,$d); | |
| &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round | |
| &add($f,$tmp1); # f+=c&d | |
| } | |
| } | |
| &function_begin("sha1_block_data_order"); | |
| if ($xmm) { | |
| &static_label("shaext_shortcut") if ($shaext); | |
| &static_label("ssse3_shortcut"); | |
| &static_label("avx_shortcut") if ($ymm); | |
| &static_label("K_XX_XX"); | |
| &call (&label("pic_point")); # make it PIC! | |
| &set_label("pic_point"); | |
| &blindpop($tmp1); | |
| &picmeup($T,"OPENSSL_ia32cap_P",$tmp1,&label("pic_point")); | |
| &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1)); | |
| &mov ($A,&DWP(0,$T)); | |
| &mov ($D,&DWP(4,$T)); | |
| &test ($D,1<<9); # check SSSE3 bit | |
| &jz (&label("x86")); | |
| &mov ($C,&DWP(8,$T)); | |
| &test ($A,1<<24); # check FXSR bit | |
| &jz (&label("x86")); | |
| if ($shaext) { | |
| &test ($C,1<<29); # check SHA bit | |
| &jnz (&label("shaext_shortcut")); | |
| } | |
| if ($ymm) { | |
| &and ($D,1<<28); # mask AVX bit | |
| &and ($A,1<<30); # mask "Intel CPU" bit | |
| &or ($A,$D); | |
| &cmp ($A,1<<28|1<<30); | |
| &je (&label("avx_shortcut")); | |
| } | |
| &jmp (&label("ssse3_shortcut")); | |
| &set_label("x86",16); | |
| } | |
| &mov($tmp1,&wparam(0)); # SHA_CTX *c | |
| &mov($T,&wparam(1)); # const void *input | |
| &mov($A,&wparam(2)); # size_t num | |
| &stack_push(16+3); # allocate X[16] | |
| &shl($A,6); | |
| &add($A,$T); | |
| &mov(&wparam(2),$A); # pointer beyond the end of input | |
| &mov($E,&DWP(16,$tmp1));# pre-load E | |
| &jmp(&label("loop")); | |
| &set_label("loop",16); | |
| # copy input chunk to X, but reversing byte order! | |
| for ($i=0; $i<16; $i+=4) | |
| { | |
| &mov($A,&DWP(4*($i+0),$T)); | |
| &mov($B,&DWP(4*($i+1),$T)); | |
| &mov($C,&DWP(4*($i+2),$T)); | |
| &mov($D,&DWP(4*($i+3),$T)); | |
| &bswap($A); | |
| &bswap($B); | |
| &bswap($C); | |
| &bswap($D); | |
| &mov(&swtmp($i+0),$A); | |
| &mov(&swtmp($i+1),$B); | |
| &mov(&swtmp($i+2),$C); | |
| &mov(&swtmp($i+3),$D); | |
| } | |
| &mov(&wparam(1),$T); # redundant in 1st spin | |
| &mov($A,&DWP(0,$tmp1)); # load SHA_CTX | |
| &mov($B,&DWP(4,$tmp1)); | |
| &mov($C,&DWP(8,$tmp1)); | |
| &mov($D,&DWP(12,$tmp1)); | |
| # E is pre-loaded | |
| for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } | |
| for(;$i<20;$i++) { &BODY_16_19($i,@V); unshift(@V,pop(@V)); } | |
| for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } | |
| for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } | |
| for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } | |
| (($V[5] eq $D) and ($V[0] eq $E)) or die; # double-check | |
| &mov($tmp1,&wparam(0)); # re-load SHA_CTX* | |
| &mov($D,&wparam(1)); # D is last "T" and is discarded | |
| &add($E,&DWP(0,$tmp1)); # E is last "A"... | |
| &add($T,&DWP(4,$tmp1)); | |
| &add($A,&DWP(8,$tmp1)); | |
| &add($B,&DWP(12,$tmp1)); | |
| &add($C,&DWP(16,$tmp1)); | |
| &mov(&DWP(0,$tmp1),$E); # update SHA_CTX | |
| &add($D,64); # advance input pointer | |
| &mov(&DWP(4,$tmp1),$T); | |
| &cmp($D,&wparam(2)); # have we reached the end yet? | |
| &mov(&DWP(8,$tmp1),$A); | |
| &mov($E,$C); # C is last "E" which needs to be "pre-loaded" | |
| &mov(&DWP(12,$tmp1),$B); | |
| &mov($T,$D); # input pointer | |
| &mov(&DWP(16,$tmp1),$C); | |
| &jb(&label("loop")); | |
| &stack_pop(16+3); | |
| &function_end("sha1_block_data_order"); | |
| if ($xmm) { | |
| if ($shaext) { | |
| ###################################################################### | |
| # Intel SHA Extensions implementation of SHA1 update function. | |
| # | |
| my ($ctx,$inp,$num)=("edi","esi","ecx"); | |
| my ($ABCD,$E,$E_,$BSWAP)=map("xmm$_",(0..3)); | |
| my @MSG=map("xmm$_",(4..7)); | |
| sub sha1rnds4 { | |
| my ($dst,$src,$imm)=@_; | |
| if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/) | |
| { &data_byte(0x0f,0x3a,0xcc,0xc0|($1<<3)|$2,$imm); } | |
| } | |
| sub sha1op38 { | |
| my ($opcodelet,$dst,$src)=@_; | |
| if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/) | |
| { &data_byte(0x0f,0x38,$opcodelet,0xc0|($1<<3)|$2); } | |
| } | |
| sub sha1nexte { sha1op38(0xc8,@_); } | |
| sub sha1msg1 { sha1op38(0xc9,@_); } | |
| sub sha1msg2 { sha1op38(0xca,@_); } | |
| &function_begin("_sha1_block_data_order_shaext"); | |
| &call (&label("pic_point")); # make it PIC! | |
| &set_label("pic_point"); | |
| &blindpop($tmp1); | |
| &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1)); | |
| &set_label("shaext_shortcut"); | |
| &mov ($ctx,&wparam(0)); | |
| &mov ("ebx","esp"); | |
| &mov ($inp,&wparam(1)); | |
| &mov ($num,&wparam(2)); | |
| &sub ("esp",32); | |
| &movdqu ($ABCD,&QWP(0,$ctx)); | |
| &movd ($E,&DWP(16,$ctx)); | |
| &and ("esp",-32); | |
| &movdqa ($BSWAP,&QWP(0x50,$tmp1)); # byte-n-word swap | |
| &movdqu (@MSG[0],&QWP(0,$inp)); | |
| &pshufd ($ABCD,$ABCD,0b00011011); # flip word order | |
| &movdqu (@MSG[1],&QWP(0x10,$inp)); | |
| &pshufd ($E,$E,0b00011011); # flip word order | |
| &movdqu (@MSG[2],&QWP(0x20,$inp)); | |
| &pshufb (@MSG[0],$BSWAP); | |
| &movdqu (@MSG[3],&QWP(0x30,$inp)); | |
| &pshufb (@MSG[1],$BSWAP); | |
| &pshufb (@MSG[2],$BSWAP); | |
| &pshufb (@MSG[3],$BSWAP); | |
| &jmp (&label("loop_shaext")); | |
| &set_label("loop_shaext",16); | |
| &dec ($num); | |
| &lea ("eax",&DWP(0x40,$inp)); | |
| &movdqa (&QWP(0,"esp"),$E); # offload $E | |
| &paddd ($E,@MSG[0]); | |
| &cmovne ($inp,"eax"); | |
| &movdqa (&QWP(16,"esp"),$ABCD); # offload $ABCD | |
| for($i=0;$i<20-4;$i+=2) { | |
| &sha1msg1 (@MSG[0],@MSG[1]); | |
| &movdqa ($E_,$ABCD); | |
| &sha1rnds4 ($ABCD,$E,int($i/5)); # 0-3... | |
| &sha1nexte ($E_,@MSG[1]); | |
| &pxor (@MSG[0],@MSG[2]); | |
| &sha1msg1 (@MSG[1],@MSG[2]); | |
| &sha1msg2 (@MSG[0],@MSG[3]); | |
| &movdqa ($E,$ABCD); | |
| &sha1rnds4 ($ABCD,$E_,int(($i+1)/5)); | |
| &sha1nexte ($E,@MSG[2]); | |
| &pxor (@MSG[1],@MSG[3]); | |
| &sha1msg2 (@MSG[1],@MSG[0]); | |
| push(@MSG,shift(@MSG)); push(@MSG,shift(@MSG)); | |
| } | |
| &movdqu (@MSG[0],&QWP(0,$inp)); | |
| &movdqa ($E_,$ABCD); | |
| &sha1rnds4 ($ABCD,$E,3); # 64-67 | |
| &sha1nexte ($E_,@MSG[1]); | |
| &movdqu (@MSG[1],&QWP(0x10,$inp)); | |
| &pshufb (@MSG[0],$BSWAP); | |
| &movdqa ($E,$ABCD); | |
| &sha1rnds4 ($ABCD,$E_,3); # 68-71 | |
| &sha1nexte ($E,@MSG[2]); | |
| &movdqu (@MSG[2],&QWP(0x20,$inp)); | |
| &pshufb (@MSG[1],$BSWAP); | |
| &movdqa ($E_,$ABCD); | |
| &sha1rnds4 ($ABCD,$E,3); # 72-75 | |
| &sha1nexte ($E_,@MSG[3]); | |
| &movdqu (@MSG[3],&QWP(0x30,$inp)); | |
| &pshufb (@MSG[2],$BSWAP); | |
| &movdqa ($E,$ABCD); | |
| &sha1rnds4 ($ABCD,$E_,3); # 76-79 | |
| &movdqa ($E_,&QWP(0,"esp")); | |
| &pshufb (@MSG[3],$BSWAP); | |
| &sha1nexte ($E,$E_); | |
| &paddd ($ABCD,&QWP(16,"esp")); | |
| &jnz (&label("loop_shaext")); | |
| &pshufd ($ABCD,$ABCD,0b00011011); | |
| &pshufd ($E,$E,0b00011011); | |
| &movdqu (&QWP(0,$ctx),$ABCD) | |
| &movd (&DWP(16,$ctx),$E); | |
| &mov ("esp","ebx"); | |
| &function_end("_sha1_block_data_order_shaext"); | |
| } | |
| ###################################################################### | |
| # The SSSE3 implementation. | |
| # | |
| # %xmm[0-7] are used as ring @X[] buffer containing quadruples of last | |
| # 32 elements of the message schedule or Xupdate outputs. First 4 | |
| # quadruples are simply byte-swapped input, next 4 are calculated | |
| # according to method originally suggested by Dean Gaudet (modulo | |
| # being implemented in SSSE3). Once 8 quadruples or 32 elements are | |
| # collected, it switches to routine proposed by Max Locktyukhin. | |
| # | |
| # Calculations inevitably require temporary registers, and there are | |
| # no %xmm registers left to spare. For this reason part of the ring | |
| # buffer, X[2..4] to be specific, is offloaded to 3 quadriples ring | |
| # buffer on the stack. Keep in mind that X[2] is alias X[-6], X[3] - | |
| # X[-5], and X[4] - X[-4]... | |
| # | |
| # Another notable optimization is aggressive stack frame compression | |
| # aiming to minimize amount of 9-byte instructions... | |
| # | |
| # Yet another notable optimization is "jumping" $B variable. It means | |
| # that there is no register permanently allocated for $B value. This | |
| # allowed to eliminate one instruction from body_20_39... | |
| # | |
| my $Xi=4; # 4xSIMD Xupdate round, start pre-seeded | |
| my @X=map("xmm$_",(4..7,0..3)); # pre-seeded for $Xi=4 | |
| my @V=($A,$B,$C,$D,$E); | |
| my $j=0; # hash round | |
| my $rx=0; | |
| my @T=($T,$tmp1); | |
| my $inp; | |
| my $_rol=sub { &rol(@_) }; | |
| my $_ror=sub { &ror(@_) }; | |
| &function_begin("_sha1_block_data_order_ssse3"); | |
| &call (&label("pic_point")); # make it PIC! | |
| &set_label("pic_point"); | |
| &blindpop($tmp1); | |
| &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1)); | |
| &set_label("ssse3_shortcut"); | |
| &movdqa (@X[3],&QWP(0,$tmp1)); # K_00_19 | |
| &movdqa (@X[4],&QWP(16,$tmp1)); # K_20_39 | |
| &movdqa (@X[5],&QWP(32,$tmp1)); # K_40_59 | |
| &movdqa (@X[6],&QWP(48,$tmp1)); # K_60_79 | |
| &movdqa (@X[2],&QWP(64,$tmp1)); # pbswap mask | |
| &mov ($E,&wparam(0)); # load argument block | |
| &mov ($inp=@T[1],&wparam(1)); | |
| &mov ($D,&wparam(2)); | |
| &mov (@T[0],"esp"); | |
| # stack frame layout | |
| # | |
| # +0 X[0]+K X[1]+K X[2]+K X[3]+K # XMM->IALU xfer area | |
| # X[4]+K X[5]+K X[6]+K X[7]+K | |
| # X[8]+K X[9]+K X[10]+K X[11]+K | |
| # X[12]+K X[13]+K X[14]+K X[15]+K | |
| # | |
| # +64 X[0] X[1] X[2] X[3] # XMM->XMM backtrace area | |
| # X[4] X[5] X[6] X[7] | |
| # X[8] X[9] X[10] X[11] # even borrowed for K_00_19 | |
| # | |
| # +112 K_20_39 K_20_39 K_20_39 K_20_39 # constants | |
| # K_40_59 K_40_59 K_40_59 K_40_59 | |
| # K_60_79 K_60_79 K_60_79 K_60_79 | |
| # K_00_19 K_00_19 K_00_19 K_00_19 | |
| # pbswap mask | |
| # | |
| # +192 ctx # argument block | |
| # +196 inp | |
| # +200 end | |
| # +204 esp | |
| &sub ("esp",208); | |
| &and ("esp",-64); | |
| &movdqa (&QWP(112+0,"esp"),@X[4]); # copy constants | |
| &movdqa (&QWP(112+16,"esp"),@X[5]); | |
| &movdqa (&QWP(112+32,"esp"),@X[6]); | |
| &shl ($D,6); # len*64 | |
| &movdqa (&QWP(112+48,"esp"),@X[3]); | |
| &add ($D,$inp); # end of input | |
| &movdqa (&QWP(112+64,"esp"),@X[2]); | |
| &add ($inp,64); | |
| &mov (&DWP(192+0,"esp"),$E); # save argument block | |
| &mov (&DWP(192+4,"esp"),$inp); | |
| &mov (&DWP(192+8,"esp"),$D); | |
| &mov (&DWP(192+12,"esp"),@T[0]); # save original %esp | |
| &mov ($A,&DWP(0,$E)); # load context | |
| &mov ($B,&DWP(4,$E)); | |
| &mov ($C,&DWP(8,$E)); | |
| &mov ($D,&DWP(12,$E)); | |
| &mov ($E,&DWP(16,$E)); | |
| &mov (@T[0],$B); # magic seed | |
| &movdqu (@X[-4&7],&QWP(-64,$inp)); # load input to %xmm[0-3] | |
| &movdqu (@X[-3&7],&QWP(-48,$inp)); | |
| &movdqu (@X[-2&7],&QWP(-32,$inp)); | |
| &movdqu (@X[-1&7],&QWP(-16,$inp)); | |
| &pshufb (@X[-4&7],@X[2]); # byte swap | |
| &pshufb (@X[-3&7],@X[2]); | |
| &pshufb (@X[-2&7],@X[2]); | |
| &movdqa (&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot | |
| &pshufb (@X[-1&7],@X[2]); | |
| &paddd (@X[-4&7],@X[3]); # add K_00_19 | |
| &paddd (@X[-3&7],@X[3]); | |
| &paddd (@X[-2&7],@X[3]); | |
| &movdqa (&QWP(0,"esp"),@X[-4&7]); # X[]+K xfer to IALU | |
| &psubd (@X[-4&7],@X[3]); # restore X[] | |
| &movdqa (&QWP(0+16,"esp"),@X[-3&7]); | |
| &psubd (@X[-3&7],@X[3]); | |
| &movdqa (&QWP(0+32,"esp"),@X[-2&7]); | |
| &mov (@T[1],$C); | |
| &psubd (@X[-2&7],@X[3]); | |
| &xor (@T[1],$D); | |
| &pshufd (@X[0],@X[-4&7],0xee); # was &movdqa (@X[0],@X[-3&7]); | |
| &and (@T[0],@T[1]); | |
| &jmp (&label("loop")); | |
| ###################################################################### | |
| # SSE instruction sequence is first broken to groups of independent | |
| # instructions, independent in respect to their inputs and shifter | |
| # (not all architectures have more than one). Then IALU instructions | |
| # are "knitted in" between the SSE groups. Distance is maintained for | |
| # SSE latency of 2 in hope that it fits better upcoming AMD Bulldozer | |
| # [which allegedly also implements SSSE3]... | |
| # | |
| # Temporary registers usage. X[2] is volatile at the entry and at the | |
| # end is restored from backtrace ring buffer. X[3] is expected to | |
| # contain current K_XX_XX constant and is used to calculate X[-1]+K | |
| # from previous round, it becomes volatile the moment the value is | |
| # saved to stack for transfer to IALU. X[4] becomes volatile whenever | |
| # X[-4] is accumulated and offloaded to backtrace ring buffer, at the | |
| # end it is loaded with next K_XX_XX [which becomes X[3] in next | |
| # round]... | |
| # | |
| sub Xupdate_ssse3_16_31() # recall that $Xi starts with 4 | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 40 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &punpcklqdq(@X[0],@X[-3&7]); # compose "X[-14]" in "X[0]", was &palignr(@X[0],@X[-4&7],8); | |
| &movdqa (@X[2],@X[-1&7]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &paddd (@X[3],@X[-1&7]); | |
| &movdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]);# save X[] to backtrace buffer | |
| eval(shift(@insns)); # rol | |
| eval(shift(@insns)); | |
| &psrldq (@X[2],4); # "X[-3]", 3 dwords | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &pxor (@X[0],@X[-4&7]); # "X[0]"^="X[-16]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| &pxor (@X[2],@X[-2&7]); # "X[-3]"^"X[-8]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &pxor (@X[0],@X[2]); # "X[0]"^="X[-3]"^"X[-8]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &movdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &movdqa (@X[4],@X[0]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| &movdqa (@X[2],@X[0]); | |
| eval(shift(@insns)); | |
| &pslldq (@X[4],12); # "X[0]"<<96, extract one dword | |
| &paddd (@X[0],@X[0]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &psrld (@X[2],31); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &movdqa (@X[3],@X[4]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &psrld (@X[4],30); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| &por (@X[0],@X[2]); # "X[0]"<<<=1 | |
| eval(shift(@insns)); | |
| &movdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if ($Xi>5); # restore X[] from backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &pslld (@X[3],2); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &pxor (@X[0],@X[4]); | |
| &movdqa (@X[4],&QWP(112-16+16*(($Xi)/5),"esp")); # K_XX_XX | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &pxor (@X[0],@X[3]); # "X[0]"^=("X[0]"<<96)<<<2 | |
| &pshufd (@X[1],@X[-3&7],0xee) if ($Xi<7); # was &movdqa (@X[1],@X[-2&7]) | |
| &pshufd (@X[3],@X[-1&7],0xee) if ($Xi==7); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| foreach (@insns) { eval; } # remaining instructions [if any] | |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] | |
| } | |
| sub Xupdate_ssse3_32_79() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 to 44 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); # body_20_39 | |
| &pxor (@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]" | |
| &punpcklqdq(@X[2],@X[-1&7]); # compose "X[-6]", was &palignr(@X[2],@X[-2&7],8) | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &pxor (@X[0],@X[-7&7]); # "X[0]"^="X[-28]" | |
| &movdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]); # save X[] to backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)) if (@insns[0] =~ /_rol/); | |
| if ($Xi%5) { | |
| &movdqa (@X[4],@X[3]); # "perpetuate" K_XX_XX... | |
| } else { # ... or load next one | |
| &movdqa (@X[4],&QWP(112-16+16*($Xi/5),"esp")); | |
| } | |
| eval(shift(@insns)); # ror | |
| &paddd (@X[3],@X[-1&7]); | |
| eval(shift(@insns)); | |
| &pxor (@X[0],@X[2]); # "X[0]"^="X[-6]" | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &movdqa (@X[2],@X[0]); | |
| &movdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| eval(shift(@insns)) if (@insns[0] =~ /_rol/); | |
| &pslld (@X[0],2); | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| &psrld (@X[2],30); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| eval(shift(@insns)) if (@insns[1] =~ /_rol/); | |
| eval(shift(@insns)) if (@insns[0] =~ /_rol/); | |
| &por (@X[0],@X[2]); # "X[0]"<<<=2 | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| &movdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if($Xi<19); # restore X[] from backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| &pshufd (@X[3],@X[-1],0xee) if ($Xi<19); # was &movdqa (@X[3],@X[0]) | |
| eval(shift(@insns)); | |
| foreach (@insns) { eval; } # remaining instructions | |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] | |
| } | |
| sub Xuplast_ssse3_80() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &paddd (@X[3],@X[-1&7]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &movdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer IALU | |
| foreach (@insns) { eval; } # remaining instructions | |
| &mov ($inp=@T[1],&DWP(192+4,"esp")); | |
| &cmp ($inp,&DWP(192+8,"esp")); | |
| &je (&label("done")); | |
| &movdqa (@X[3],&QWP(112+48,"esp")); # K_00_19 | |
| &movdqa (@X[2],&QWP(112+64,"esp")); # pbswap mask | |
| &movdqu (@X[-4&7],&QWP(0,$inp)); # load input | |
| &movdqu (@X[-3&7],&QWP(16,$inp)); | |
| &movdqu (@X[-2&7],&QWP(32,$inp)); | |
| &movdqu (@X[-1&7],&QWP(48,$inp)); | |
| &add ($inp,64); | |
| &pshufb (@X[-4&7],@X[2]); # byte swap | |
| &mov (&DWP(192+4,"esp"),$inp); | |
| &movdqa (&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot | |
| $Xi=0; | |
| } | |
| sub Xloop_ssse3() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &pshufb (@X[($Xi-3)&7],@X[2]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &paddd (@X[($Xi-4)&7],@X[3]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &movdqa (&QWP(0+16*$Xi,"esp"),@X[($Xi-4)&7]); # X[]+K xfer to IALU | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &psubd (@X[($Xi-4)&7],@X[3]); | |
| foreach (@insns) { eval; } | |
| $Xi++; | |
| } | |
| sub Xtail_ssse3() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions | |
| my ($a,$b,$c,$d,$e); | |
| foreach (@insns) { eval; } | |
| } | |
| sub body_00_19 () { # ((c^d)&b)^d | |
| # on start @T[0]=(c^d)&b | |
| return &body_20_39() if ($rx==19); $rx++; | |
| ( | |
| '($a,$b,$c,$d,$e)=@V;'. | |
| '&$_ror ($b,$j?7:2);', # $b>>>2 | |
| '&xor (@T[0],$d);', | |
| '&mov (@T[1],$a);', # $b in next round | |
| '&add ($e,&DWP(4*($j&15),"esp"));', # X[]+K xfer | |
| '&xor ($b,$c);', # $c^$d for next round | |
| '&$_rol ($a,5);', | |
| '&add ($e,@T[0]);', | |
| '&and (@T[1],$b);', # ($b&($c^$d)) for next round | |
| '&xor ($b,$c);', # restore $b | |
| '&add ($e,$a);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' | |
| ); | |
| } | |
| sub body_20_39 () { # b^d^c | |
| # on entry @T[0]=b^d | |
| return &body_40_59() if ($rx==39); $rx++; | |
| ( | |
| '($a,$b,$c,$d,$e)=@V;'. | |
| '&add ($e,&DWP(4*($j&15),"esp"));', # X[]+K xfer | |
| '&xor (@T[0],$d) if($j==19);'. | |
| '&xor (@T[0],$c) if($j> 19);', # ($b^$d^$c) | |
| '&mov (@T[1],$a);', # $b in next round | |
| '&$_rol ($a,5);', | |
| '&add ($e,@T[0]);', | |
| '&xor (@T[1],$c) if ($j< 79);', # $b^$d for next round | |
| '&$_ror ($b,7);', # $b>>>2 | |
| '&add ($e,$a);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' | |
| ); | |
| } | |
| sub body_40_59 () { # ((b^c)&(c^d))^c | |
| # on entry @T[0]=(b^c), (c^=d) | |
| $rx++; | |
| ( | |
| '($a,$b,$c,$d,$e)=@V;'. | |
| '&add ($e,&DWP(4*($j&15),"esp"));', # X[]+K xfer | |
| '&and (@T[0],$c) if ($j>=40);', # (b^c)&(c^d) | |
| '&xor ($c,$d) if ($j>=40);', # restore $c | |
| '&$_ror ($b,7);', # $b>>>2 | |
| '&mov (@T[1],$a);', # $b for next round | |
| '&xor (@T[0],$c);', | |
| '&$_rol ($a,5);', | |
| '&add ($e,@T[0]);', | |
| '&xor (@T[1],$c) if ($j==59);'. | |
| '&xor (@T[1],$b) if ($j< 59);', # b^c for next round | |
| '&xor ($b,$c) if ($j< 59);', # c^d for next round | |
| '&add ($e,$a);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' | |
| ); | |
| } | |
| ###### | |
| sub bodyx_00_19 () { # ((c^d)&b)^d | |
| # on start @T[0]=(b&c)^(~b&d), $e+=X[]+K | |
| return &bodyx_20_39() if ($rx==19); $rx++; | |
| ( | |
| '($a,$b,$c,$d,$e)=@V;'. | |
| '&rorx ($b,$b,2) if ($j==0);'. # $b>>>2 | |
| '&rorx ($b,@T[1],7) if ($j!=0);', # $b>>>2 | |
| '&lea ($e,&DWP(0,$e,@T[0]));', | |
| '&rorx (@T[0],$a,5);', | |
| '&andn (@T[1],$a,$c);', | |
| '&and ($a,$b)', | |
| '&add ($d,&DWP(4*(($j+1)&15),"esp"));', # X[]+K xfer | |
| '&xor (@T[1],$a)', | |
| '&add ($e,@T[0]);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' | |
| ); | |
| } | |
| sub bodyx_20_39 () { # b^d^c | |
| # on start $b=b^c^d | |
| return &bodyx_40_59() if ($rx==39); $rx++; | |
| ( | |
| '($a,$b,$c,$d,$e)=@V;'. | |
| '&add ($e,($j==19?@T[0]:$b))', | |
| '&rorx ($b,@T[1],7);', # $b>>>2 | |
| '&rorx (@T[0],$a,5);', | |
| '&xor ($a,$b) if ($j<79);', | |
| '&add ($d,&DWP(4*(($j+1)&15),"esp")) if ($j<79);', # X[]+K xfer | |
| '&xor ($a,$c) if ($j<79);', | |
| '&add ($e,@T[0]);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' | |
| ); | |
| } | |
| sub bodyx_40_59 () { # ((b^c)&(c^d))^c | |
| # on start $b=((b^c)&(c^d))^c | |
| return &bodyx_20_39() if ($rx==59); $rx++; | |
| ( | |
| '($a,$b,$c,$d,$e)=@V;'. | |
| '&rorx (@T[0],$a,5)', | |
| '&lea ($e,&DWP(0,$e,$b))', | |
| '&rorx ($b,@T[1],7)', # $b>>>2 | |
| '&add ($d,&DWP(4*(($j+1)&15),"esp"))', # X[]+K xfer | |
| '&mov (@T[1],$c)', | |
| '&xor ($a,$b)', # b^c for next round | |
| '&xor (@T[1],$b)', # c^d for next round | |
| '&and ($a,@T[1])', | |
| '&add ($e,@T[0])', | |
| '&xor ($a,$b)' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' | |
| ); | |
| } | |
| &set_label("loop",16); | |
| &Xupdate_ssse3_16_31(\&body_00_19); | |
| &Xupdate_ssse3_16_31(\&body_00_19); | |
| &Xupdate_ssse3_16_31(\&body_00_19); | |
| &Xupdate_ssse3_16_31(\&body_00_19); | |
| &Xupdate_ssse3_32_79(\&body_00_19); | |
| &Xupdate_ssse3_32_79(\&body_20_39); | |
| &Xupdate_ssse3_32_79(\&body_20_39); | |
| &Xupdate_ssse3_32_79(\&body_20_39); | |
| &Xupdate_ssse3_32_79(\&body_20_39); | |
| &Xupdate_ssse3_32_79(\&body_20_39); | |
| &Xupdate_ssse3_32_79(\&body_40_59); | |
| &Xupdate_ssse3_32_79(\&body_40_59); | |
| &Xupdate_ssse3_32_79(\&body_40_59); | |
| &Xupdate_ssse3_32_79(\&body_40_59); | |
| &Xupdate_ssse3_32_79(\&body_40_59); | |
| &Xupdate_ssse3_32_79(\&body_20_39); | |
| &Xuplast_ssse3_80(\&body_20_39); # can jump to "done" | |
| $saved_j=$j; @saved_V=@V; | |
| &Xloop_ssse3(\&body_20_39); | |
| &Xloop_ssse3(\&body_20_39); | |
| &Xloop_ssse3(\&body_20_39); | |
| &mov (@T[1],&DWP(192,"esp")); # update context | |
| &add ($A,&DWP(0,@T[1])); | |
| &add (@T[0],&DWP(4,@T[1])); # $b | |
| &add ($C,&DWP(8,@T[1])); | |
| &mov (&DWP(0,@T[1]),$A); | |
| &add ($D,&DWP(12,@T[1])); | |
| &mov (&DWP(4,@T[1]),@T[0]); | |
| &add ($E,&DWP(16,@T[1])); | |
| &mov (&DWP(8,@T[1]),$C); | |
| &mov ($B,$C); | |
| &mov (&DWP(12,@T[1]),$D); | |
| &xor ($B,$D); | |
| &mov (&DWP(16,@T[1]),$E); | |
| &mov (@T[1],@T[0]); | |
| &pshufd (@X[0],@X[-4&7],0xee); # was &movdqa (@X[0],@X[-3&7]); | |
| &and (@T[0],$B); | |
| &mov ($B,$T[1]); | |
| &jmp (&label("loop")); | |
| &set_label("done",16); $j=$saved_j; @V=@saved_V; | |
| &Xtail_ssse3(\&body_20_39); | |
| &Xtail_ssse3(\&body_20_39); | |
| &Xtail_ssse3(\&body_20_39); | |
| &mov (@T[1],&DWP(192,"esp")); # update context | |
| &add ($A,&DWP(0,@T[1])); | |
| &mov ("esp",&DWP(192+12,"esp")); # restore %esp | |
| &add (@T[0],&DWP(4,@T[1])); # $b | |
| &add ($C,&DWP(8,@T[1])); | |
| &mov (&DWP(0,@T[1]),$A); | |
| &add ($D,&DWP(12,@T[1])); | |
| &mov (&DWP(4,@T[1]),@T[0]); | |
| &add ($E,&DWP(16,@T[1])); | |
| &mov (&DWP(8,@T[1]),$C); | |
| &mov (&DWP(12,@T[1]),$D); | |
| &mov (&DWP(16,@T[1]),$E); | |
| &function_end("_sha1_block_data_order_ssse3"); | |
| $rx=0; # reset | |
| if ($ymm) { | |
| my $Xi=4; # 4xSIMD Xupdate round, start pre-seeded | |
| my @X=map("xmm$_",(4..7,0..3)); # pre-seeded for $Xi=4 | |
| my @V=($A,$B,$C,$D,$E); | |
| my $j=0; # hash round | |
| my @T=($T,$tmp1); | |
| my $inp; | |
| my $_rol=sub { &shld(@_[0],@_) }; | |
| my $_ror=sub { &shrd(@_[0],@_) }; | |
| &function_begin("_sha1_block_data_order_avx"); | |
| &call (&label("pic_point")); # make it PIC! | |
| &set_label("pic_point"); | |
| &blindpop($tmp1); | |
| &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1)); | |
| &set_label("avx_shortcut"); | |
| &vzeroall(); | |
| &vmovdqa(@X[3],&QWP(0,$tmp1)); # K_00_19 | |
| &vmovdqa(@X[4],&QWP(16,$tmp1)); # K_20_39 | |
| &vmovdqa(@X[5],&QWP(32,$tmp1)); # K_40_59 | |
| &vmovdqa(@X[6],&QWP(48,$tmp1)); # K_60_79 | |
| &vmovdqa(@X[2],&QWP(64,$tmp1)); # pbswap mask | |
| &mov ($E,&wparam(0)); # load argument block | |
| &mov ($inp=@T[1],&wparam(1)); | |
| &mov ($D,&wparam(2)); | |
| &mov (@T[0],"esp"); | |
| # stack frame layout | |
| # | |
| # +0 X[0]+K X[1]+K X[2]+K X[3]+K # XMM->IALU xfer area | |
| # X[4]+K X[5]+K X[6]+K X[7]+K | |
| # X[8]+K X[9]+K X[10]+K X[11]+K | |
| # X[12]+K X[13]+K X[14]+K X[15]+K | |
| # | |
| # +64 X[0] X[1] X[2] X[3] # XMM->XMM backtrace area | |
| # X[4] X[5] X[6] X[7] | |
| # X[8] X[9] X[10] X[11] # even borrowed for K_00_19 | |
| # | |
| # +112 K_20_39 K_20_39 K_20_39 K_20_39 # constants | |
| # K_40_59 K_40_59 K_40_59 K_40_59 | |
| # K_60_79 K_60_79 K_60_79 K_60_79 | |
| # K_00_19 K_00_19 K_00_19 K_00_19 | |
| # pbswap mask | |
| # | |
| # +192 ctx # argument block | |
| # +196 inp | |
| # +200 end | |
| # +204 esp | |
| &sub ("esp",208); | |
| &and ("esp",-64); | |
| &vmovdqa(&QWP(112+0,"esp"),@X[4]); # copy constants | |
| &vmovdqa(&QWP(112+16,"esp"),@X[5]); | |
| &vmovdqa(&QWP(112+32,"esp"),@X[6]); | |
| &shl ($D,6); # len*64 | |
| &vmovdqa(&QWP(112+48,"esp"),@X[3]); | |
| &add ($D,$inp); # end of input | |
| &vmovdqa(&QWP(112+64,"esp"),@X[2]); | |
| &add ($inp,64); | |
| &mov (&DWP(192+0,"esp"),$E); # save argument block | |
| &mov (&DWP(192+4,"esp"),$inp); | |
| &mov (&DWP(192+8,"esp"),$D); | |
| &mov (&DWP(192+12,"esp"),@T[0]); # save original %esp | |
| &mov ($A,&DWP(0,$E)); # load context | |
| &mov ($B,&DWP(4,$E)); | |
| &mov ($C,&DWP(8,$E)); | |
| &mov ($D,&DWP(12,$E)); | |
| &mov ($E,&DWP(16,$E)); | |
| &mov (@T[0],$B); # magic seed | |
| &vmovdqu(@X[-4&7],&QWP(-64,$inp)); # load input to %xmm[0-3] | |
| &vmovdqu(@X[-3&7],&QWP(-48,$inp)); | |
| &vmovdqu(@X[-2&7],&QWP(-32,$inp)); | |
| &vmovdqu(@X[-1&7],&QWP(-16,$inp)); | |
| &vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap | |
| &vpshufb(@X[-3&7],@X[-3&7],@X[2]); | |
| &vpshufb(@X[-2&7],@X[-2&7],@X[2]); | |
| &vmovdqa(&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot | |
| &vpshufb(@X[-1&7],@X[-1&7],@X[2]); | |
| &vpaddd (@X[0],@X[-4&7],@X[3]); # add K_00_19 | |
| &vpaddd (@X[1],@X[-3&7],@X[3]); | |
| &vpaddd (@X[2],@X[-2&7],@X[3]); | |
| &vmovdqa(&QWP(0,"esp"),@X[0]); # X[]+K xfer to IALU | |
| &mov (@T[1],$C); | |
| &vmovdqa(&QWP(0+16,"esp"),@X[1]); | |
| &xor (@T[1],$D); | |
| &vmovdqa(&QWP(0+32,"esp"),@X[2]); | |
| &and (@T[0],@T[1]); | |
| &jmp (&label("loop")); | |
| sub Xupdate_avx_16_31() # recall that $Xi starts with 4 | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 40 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpalignr(@X[0],@X[-3&7],@X[-4&7],8); # compose "X[-14]" in "X[0]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpaddd (@X[3],@X[3],@X[-1&7]); | |
| &vmovdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]);# save X[] to backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpsrldq(@X[2],@X[-1&7],4); # "X[-3]", 3 dwords | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpxor (@X[2],@X[2],@X[-2&7]); # "X[-3]"^"X[-8]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vmovdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpxor (@X[0],@X[0],@X[2]); # "X[0]"^="X[-3]"^"X[-8]" | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpsrld (@X[2],@X[0],31); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpslldq(@X[4],@X[0],12); # "X[0]"<<96, extract one dword | |
| &vpaddd (@X[0],@X[0],@X[0]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpsrld (@X[3],@X[4],30); | |
| &vpor (@X[0],@X[0],@X[2]); # "X[0]"<<<=1 | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpslld (@X[4],@X[4],2); | |
| &vmovdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if ($Xi>5); # restore X[] from backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpxor (@X[0],@X[0],@X[3]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpxor (@X[0],@X[0],@X[4]); # "X[0]"^=("X[0]"<<96)<<<2 | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vmovdqa (@X[4],&QWP(112-16+16*(($Xi)/5),"esp")); # K_XX_XX | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| foreach (@insns) { eval; } # remaining instructions [if any] | |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] | |
| } | |
| sub Xupdate_avx_32_79() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 to 44 instructions | |
| my ($a,$b,$c,$d,$e); | |
| &vpalignr(@X[2],@X[-1&7],@X[-2&7],8); # compose "X[-6]" | |
| &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]" | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &vpxor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]" | |
| &vmovdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]); # save X[] to backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| if ($Xi%5) { | |
| &vmovdqa (@X[4],@X[3]); # "perpetuate" K_XX_XX... | |
| } else { # ... or load next one | |
| &vmovdqa (@X[4],&QWP(112-16+16*($Xi/5),"esp")); | |
| } | |
| &vpaddd (@X[3],@X[3],@X[-1&7]); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| &vpxor (@X[0],@X[0],@X[2]); # "X[0]"^="X[-6]" | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| &vpsrld (@X[2],@X[0],30); | |
| &vmovdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| &vpslld (@X[0],@X[0],2); | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| &vpor (@X[0],@X[0],@X[2]); # "X[0]"<<<=2 | |
| eval(shift(@insns)); # body_20_39 | |
| eval(shift(@insns)); | |
| &vmovdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if($Xi<19); # restore X[] from backtrace buffer | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # rol | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); # ror | |
| eval(shift(@insns)); | |
| foreach (@insns) { eval; } # remaining instructions | |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] | |
| } | |
| sub Xuplast_avx_80() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); | |
| &vpaddd (@X[3],@X[3],@X[-1&7]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vmovdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer IALU | |
| foreach (@insns) { eval; } # remaining instructions | |
| &mov ($inp=@T[1],&DWP(192+4,"esp")); | |
| &cmp ($inp,&DWP(192+8,"esp")); | |
| &je (&label("done")); | |
| &vmovdqa(@X[3],&QWP(112+48,"esp")); # K_00_19 | |
| &vmovdqa(@X[2],&QWP(112+64,"esp")); # pbswap mask | |
| &vmovdqu(@X[-4&7],&QWP(0,$inp)); # load input | |
| &vmovdqu(@X[-3&7],&QWP(16,$inp)); | |
| &vmovdqu(@X[-2&7],&QWP(32,$inp)); | |
| &vmovdqu(@X[-1&7],&QWP(48,$inp)); | |
| &add ($inp,64); | |
| &vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap | |
| &mov (&DWP(192+4,"esp"),$inp); | |
| &vmovdqa(&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot | |
| $Xi=0; | |
| } | |
| sub Xloop_avx() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions | |
| my ($a,$b,$c,$d,$e); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpshufb (@X[($Xi-3)&7],@X[($Xi-3)&7],@X[2]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vpaddd (@X[$Xi&7],@X[($Xi-4)&7],@X[3]); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| &vmovdqa (&QWP(0+16*$Xi,"esp"),@X[$Xi&7]); # X[]+K xfer to IALU | |
| eval(shift(@insns)); | |
| eval(shift(@insns)); | |
| foreach (@insns) { eval; } | |
| $Xi++; | |
| } | |
| sub Xtail_avx() | |
| { use integer; | |
| my $body = shift; | |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions | |
| my ($a,$b,$c,$d,$e); | |
| foreach (@insns) { eval; } | |
| } | |
| &set_label("loop",16); | |
| &Xupdate_avx_16_31(\&body_00_19); | |
| &Xupdate_avx_16_31(\&body_00_19); | |
| &Xupdate_avx_16_31(\&body_00_19); | |
| &Xupdate_avx_16_31(\&body_00_19); | |
| &Xupdate_avx_32_79(\&body_00_19); | |
| &Xupdate_avx_32_79(\&body_20_39); | |
| &Xupdate_avx_32_79(\&body_20_39); | |
| &Xupdate_avx_32_79(\&body_20_39); | |
| &Xupdate_avx_32_79(\&body_20_39); | |
| &Xupdate_avx_32_79(\&body_20_39); | |
| &Xupdate_avx_32_79(\&body_40_59); | |
| &Xupdate_avx_32_79(\&body_40_59); | |
| &Xupdate_avx_32_79(\&body_40_59); | |
| &Xupdate_avx_32_79(\&body_40_59); | |
| &Xupdate_avx_32_79(\&body_40_59); | |
| &Xupdate_avx_32_79(\&body_20_39); | |
| &Xuplast_avx_80(\&body_20_39); # can jump to "done" | |
| $saved_j=$j; @saved_V=@V; | |
| &Xloop_avx(\&body_20_39); | |
| &Xloop_avx(\&body_20_39); | |
| &Xloop_avx(\&body_20_39); | |
| &mov (@T[1],&DWP(192,"esp")); # update context | |
| &add ($A,&DWP(0,@T[1])); | |
| &add (@T[0],&DWP(4,@T[1])); # $b | |
| &add ($C,&DWP(8,@T[1])); | |
| &mov (&DWP(0,@T[1]),$A); | |
| &add ($D,&DWP(12,@T[1])); | |
| &mov (&DWP(4,@T[1]),@T[0]); | |
| &add ($E,&DWP(16,@T[1])); | |
| &mov ($B,$C); | |
| &mov (&DWP(8,@T[1]),$C); | |
| &xor ($B,$D); | |
| &mov (&DWP(12,@T[1]),$D); | |
| &mov (&DWP(16,@T[1]),$E); | |
| &mov (@T[1],@T[0]); | |
| &and (@T[0],$B); | |
| &mov ($B,@T[1]); | |
| &jmp (&label("loop")); | |
| &set_label("done",16); $j=$saved_j; @V=@saved_V; | |
| &Xtail_avx(\&body_20_39); | |
| &Xtail_avx(\&body_20_39); | |
| &Xtail_avx(\&body_20_39); | |
| &vzeroall(); | |
| &mov (@T[1],&DWP(192,"esp")); # update context | |
| &add ($A,&DWP(0,@T[1])); | |
| &mov ("esp",&DWP(192+12,"esp")); # restore %esp | |
| &add (@T[0],&DWP(4,@T[1])); # $b | |
| &add ($C,&DWP(8,@T[1])); | |
| &mov (&DWP(0,@T[1]),$A); | |
| &add ($D,&DWP(12,@T[1])); | |
| &mov (&DWP(4,@T[1]),@T[0]); | |
| &add ($E,&DWP(16,@T[1])); | |
| &mov (&DWP(8,@T[1]),$C); | |
| &mov (&DWP(12,@T[1]),$D); | |
| &mov (&DWP(16,@T[1]),$E); | |
| &function_end("_sha1_block_data_order_avx"); | |
| } | |
| &set_label("K_XX_XX",64); | |
| &data_word(0x5a827999,0x5a827999,0x5a827999,0x5a827999); # K_00_19 | |
| &data_word(0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1); # K_20_39 | |
| &data_word(0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc); # K_40_59 | |
| &data_word(0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6); # K_60_79 | |
| &data_word(0x00010203,0x04050607,0x08090a0b,0x0c0d0e0f); # pbswap mask | |
| &data_byte(0xf,0xe,0xd,0xc,0xb,0xa,0x9,0x8,0x7,0x6,0x5,0x4,0x3,0x2,0x1,0x0); | |
| } | |
| &asciz("SHA1 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); | |
| &asm_finish(); | |
| close STDOUT; |