| // Copyright 2005, Google Inc. |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following disclaimer |
| // in the documentation and/or other materials provided with the |
| // distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| // |
| // Low-level types and utilities for porting Google Test to various |
| // platforms. All macros ending with _ and symbols defined in an |
| // internal namespace are subject to change without notice. Code |
| // outside Google Test MUST NOT USE THEM DIRECTLY. Macros that don't |
| // end with _ are part of Google Test's public API and can be used by |
| // code outside Google Test. |
| // |
| // This file is fundamental to Google Test. All other Google Test source |
| // files are expected to #include this. Therefore, it cannot #include |
| // any other Google Test header. |
| |
| // GOOGLETEST_CM0001 DO NOT DELETE |
| |
| #ifndef GTEST_INCLUDE_GTEST_INTERNAL_GTEST_PORT_H_ |
| #define GTEST_INCLUDE_GTEST_INTERNAL_GTEST_PORT_H_ |
| |
| // Environment-describing macros |
| // ----------------------------- |
| // |
| // Google Test can be used in many different environments. Macros in |
| // this section tell Google Test what kind of environment it is being |
| // used in, such that Google Test can provide environment-specific |
| // features and implementations. |
| // |
| // Google Test tries to automatically detect the properties of its |
| // environment, so users usually don't need to worry about these |
| // macros. However, the automatic detection is not perfect. |
| // Sometimes it's necessary for a user to define some of the following |
| // macros in the build script to override Google Test's decisions. |
| // |
| // If the user doesn't define a macro in the list, Google Test will |
| // provide a default definition. After this header is #included, all |
| // macros in this list will be defined to either 1 or 0. |
| // |
| // Notes to maintainers: |
| // - Each macro here is a user-tweakable knob; do not grow the list |
| // lightly. |
| // - Use #if to key off these macros. Don't use #ifdef or "#if |
| // defined(...)", which will not work as these macros are ALWAYS |
| // defined. |
| // |
| // GTEST_HAS_CLONE - Define it to 1/0 to indicate that clone(2) |
| // is/isn't available. |
| // GTEST_HAS_EXCEPTIONS - Define it to 1/0 to indicate that exceptions |
| // are enabled. |
| // GTEST_HAS_POSIX_RE - Define it to 1/0 to indicate that POSIX regular |
| // expressions are/aren't available. |
| // GTEST_HAS_PTHREAD - Define it to 1/0 to indicate that <pthread.h> |
| // is/isn't available. |
| // GTEST_HAS_RTTI - Define it to 1/0 to indicate that RTTI is/isn't |
| // enabled. |
| // GTEST_HAS_STD_WSTRING - Define it to 1/0 to indicate that |
| // std::wstring does/doesn't work (Google Test can |
| // be used where std::wstring is unavailable). |
| // GTEST_HAS_SEH - Define it to 1/0 to indicate whether the |
| // compiler supports Microsoft's "Structured |
| // Exception Handling". |
| // GTEST_HAS_STREAM_REDIRECTION |
| // - Define it to 1/0 to indicate whether the |
| // platform supports I/O stream redirection using |
| // dup() and dup2(). |
| // GTEST_LINKED_AS_SHARED_LIBRARY |
| // - Define to 1 when compiling tests that use |
| // Google Test as a shared library (known as |
| // DLL on Windows). |
| // GTEST_CREATE_SHARED_LIBRARY |
| // - Define to 1 when compiling Google Test itself |
| // as a shared library. |
| // GTEST_DEFAULT_DEATH_TEST_STYLE |
| // - The default value of --gtest_death_test_style. |
| // The legacy default has been "fast" in the open |
| // source version since 2008. The recommended value |
| // is "threadsafe", and can be set in |
| // custom/gtest-port.h. |
| |
| // Platform-indicating macros |
| // -------------------------- |
| // |
| // Macros indicating the platform on which Google Test is being used |
| // (a macro is defined to 1 if compiled on the given platform; |
| // otherwise UNDEFINED -- it's never defined to 0.). Google Test |
| // defines these macros automatically. Code outside Google Test MUST |
| // NOT define them. |
| // |
| // GTEST_OS_AIX - IBM AIX |
| // GTEST_OS_CYGWIN - Cygwin |
| // GTEST_OS_DRAGONFLY - DragonFlyBSD |
| // GTEST_OS_FREEBSD - FreeBSD |
| // GTEST_OS_FUCHSIA - Fuchsia |
| // GTEST_OS_GNU_KFREEBSD - GNU/kFreeBSD |
| // GTEST_OS_HAIKU - Haiku |
| // GTEST_OS_HPUX - HP-UX |
| // GTEST_OS_LINUX - Linux |
| // GTEST_OS_LINUX_ANDROID - Google Android |
| // GTEST_OS_MAC - Mac OS X |
| // GTEST_OS_IOS - iOS |
| // GTEST_OS_NACL - Google Native Client (NaCl) |
| // GTEST_OS_NETBSD - NetBSD |
| // GTEST_OS_OPENBSD - OpenBSD |
| // GTEST_OS_OS2 - OS/2 |
| // GTEST_OS_QNX - QNX |
| // GTEST_OS_SOLARIS - Sun Solaris |
| // GTEST_OS_WINDOWS - Windows (Desktop, MinGW, or Mobile) |
| // GTEST_OS_WINDOWS_DESKTOP - Windows Desktop |
| // GTEST_OS_WINDOWS_MINGW - MinGW |
| // GTEST_OS_WINDOWS_MOBILE - Windows Mobile |
| // GTEST_OS_WINDOWS_PHONE - Windows Phone |
| // GTEST_OS_WINDOWS_RT - Windows Store App/WinRT |
| // GTEST_OS_ZOS - z/OS |
| // |
| // Among the platforms, Cygwin, Linux, Mac OS X, and Windows have the |
| // most stable support. Since core members of the Google Test project |
| // don't have access to other platforms, support for them may be less |
| // stable. If you notice any problems on your platform, please notify |
| // googletestframework@googlegroups.com (patches for fixing them are |
| // even more welcome!). |
| // |
| // It is possible that none of the GTEST_OS_* macros are defined. |
| |
| // Feature-indicating macros |
| // ------------------------- |
| // |
| // Macros indicating which Google Test features are available (a macro |
| // is defined to 1 if the corresponding feature is supported; |
| // otherwise UNDEFINED -- it's never defined to 0.). Google Test |
| // defines these macros automatically. Code outside Google Test MUST |
| // NOT define them. |
| // |
| // These macros are public so that portable tests can be written. |
| // Such tests typically surround code using a feature with an #if |
| // which controls that code. For example: |
| // |
| // #if GTEST_HAS_DEATH_TEST |
| // EXPECT_DEATH(DoSomethingDeadly()); |
| // #endif |
| // |
| // GTEST_HAS_DEATH_TEST - death tests |
| // GTEST_HAS_TYPED_TEST - typed tests |
| // GTEST_HAS_TYPED_TEST_P - type-parameterized tests |
| // GTEST_IS_THREADSAFE - Google Test is thread-safe. |
| // GOOGLETEST_CM0007 DO NOT DELETE |
| // GTEST_USES_POSIX_RE - enhanced POSIX regex is used. Do not confuse with |
| // GTEST_HAS_POSIX_RE (see above) which users can |
| // define themselves. |
| // GTEST_USES_SIMPLE_RE - our own simple regex is used; |
| // the above RE\b(s) are mutually exclusive. |
| |
| // Misc public macros |
| // ------------------ |
| // |
| // GTEST_FLAG(flag_name) - references the variable corresponding to |
| // the given Google Test flag. |
| |
| // Internal utilities |
| // ------------------ |
| // |
| // The following macros and utilities are for Google Test's INTERNAL |
| // use only. Code outside Google Test MUST NOT USE THEM DIRECTLY. |
| // |
| // Macros for basic C++ coding: |
| // GTEST_AMBIGUOUS_ELSE_BLOCKER_ - for disabling a gcc warning. |
| // GTEST_ATTRIBUTE_UNUSED_ - declares that a class' instances or a |
| // variable don't have to be used. |
| // GTEST_DISALLOW_ASSIGN_ - disables copy operator=. |
| // GTEST_DISALLOW_COPY_AND_ASSIGN_ - disables copy ctor and operator=. |
| // GTEST_DISALLOW_MOVE_ASSIGN_ - disables move operator=. |
| // GTEST_DISALLOW_MOVE_AND_ASSIGN_ - disables move ctor and operator=. |
| // GTEST_MUST_USE_RESULT_ - declares that a function's result must be used. |
| // GTEST_INTENTIONAL_CONST_COND_PUSH_ - start code section where MSVC C4127 is |
| // suppressed (constant conditional). |
| // GTEST_INTENTIONAL_CONST_COND_POP_ - finish code section where MSVC C4127 |
| // is suppressed. |
| // GTEST_INTERNAL_HAS_ANY - for enabling UniversalPrinter<std::any> or |
| // UniversalPrinter<absl::any> specializations. |
| // GTEST_INTERNAL_HAS_OPTIONAL - for enabling UniversalPrinter<std::optional> |
| // or |
| // UniversalPrinter<absl::optional> |
| // specializations. |
| // GTEST_INTERNAL_HAS_STRING_VIEW - for enabling Matcher<std::string_view> or |
| // Matcher<absl::string_view> |
| // specializations. |
| // GTEST_INTERNAL_HAS_VARIANT - for enabling UniversalPrinter<std::variant> or |
| // UniversalPrinter<absl::variant> |
| // specializations. |
| // |
| // Synchronization: |
| // Mutex, MutexLock, ThreadLocal, GetThreadCount() |
| // - synchronization primitives. |
| // |
| // Regular expressions: |
| // RE - a simple regular expression class using the POSIX |
| // Extended Regular Expression syntax on UNIX-like platforms |
| // GOOGLETEST_CM0008 DO NOT DELETE |
| // or a reduced regular exception syntax on other |
| // platforms, including Windows. |
| // Logging: |
| // GTEST_LOG_() - logs messages at the specified severity level. |
| // LogToStderr() - directs all log messages to stderr. |
| // FlushInfoLog() - flushes informational log messages. |
| // |
| // Stdout and stderr capturing: |
| // CaptureStdout() - starts capturing stdout. |
| // GetCapturedStdout() - stops capturing stdout and returns the captured |
| // string. |
| // CaptureStderr() - starts capturing stderr. |
| // GetCapturedStderr() - stops capturing stderr and returns the captured |
| // string. |
| // |
| // Integer types: |
| // TypeWithSize - maps an integer to a int type. |
| // TimeInMillis - integers of known sizes. |
| // BiggestInt - the biggest signed integer type. |
| // |
| // Command-line utilities: |
| // GTEST_DECLARE_*() - declares a flag. |
| // GTEST_DEFINE_*() - defines a flag. |
| // GetInjectableArgvs() - returns the command line as a vector of strings. |
| // |
| // Environment variable utilities: |
| // GetEnv() - gets the value of an environment variable. |
| // BoolFromGTestEnv() - parses a bool environment variable. |
| // Int32FromGTestEnv() - parses an int32_t environment variable. |
| // StringFromGTestEnv() - parses a string environment variable. |
| // |
| // Deprecation warnings: |
| // GTEST_INTERNAL_DEPRECATED(message) - attribute marking a function as |
| // deprecated; calling a marked function |
| // should generate a compiler warning |
| |
| #include <ctype.h> // for isspace, etc |
| #include <stddef.h> // for ptrdiff_t |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include <cerrno> |
| #include <cstdint> |
| #include <limits> |
| #include <type_traits> |
| |
| #ifndef _WIN32_WCE |
| # include <sys/types.h> |
| # include <sys/stat.h> |
| #endif // !_WIN32_WCE |
| |
| #if defined __APPLE__ |
| # include <AvailabilityMacros.h> |
| # include <TargetConditionals.h> |
| #endif |
| |
| #include <iostream> // NOLINT |
| #include <locale> |
| #include <memory> |
| #include <string> // NOLINT |
| #include <tuple> |
| #include <vector> // NOLINT |
| |
| #include "gtest/internal/custom/gtest-port.h" |
| #include "gtest/internal/gtest-port-arch.h" |
| |
| #if !defined(GTEST_DEV_EMAIL_) |
| # define GTEST_DEV_EMAIL_ "googletestframework@@googlegroups.com" |
| # define GTEST_FLAG_PREFIX_ "gtest_" |
| # define GTEST_FLAG_PREFIX_DASH_ "gtest-" |
| # define GTEST_FLAG_PREFIX_UPPER_ "GTEST_" |
| # define GTEST_NAME_ "Google Test" |
| # define GTEST_PROJECT_URL_ "https://github.com/google/googletest/" |
| #endif // !defined(GTEST_DEV_EMAIL_) |
| |
| #if !defined(GTEST_INIT_GOOGLE_TEST_NAME_) |
| # define GTEST_INIT_GOOGLE_TEST_NAME_ "testing::InitGoogleTest" |
| #endif // !defined(GTEST_INIT_GOOGLE_TEST_NAME_) |
| |
| // Determines the version of gcc that is used to compile this. |
| #ifdef __GNUC__ |
| // 40302 means version 4.3.2. |
| # define GTEST_GCC_VER_ \ |
| (__GNUC__*10000 + __GNUC_MINOR__*100 + __GNUC_PATCHLEVEL__) |
| #endif // __GNUC__ |
| |
| // Macros for disabling Microsoft Visual C++ warnings. |
| // |
| // GTEST_DISABLE_MSC_WARNINGS_PUSH_(4800 4385) |
| // /* code that triggers warnings C4800 and C4385 */ |
| // GTEST_DISABLE_MSC_WARNINGS_POP_() |
| #if defined(_MSC_VER) |
| # define GTEST_DISABLE_MSC_WARNINGS_PUSH_(warnings) \ |
| __pragma(warning(push)) \ |
| __pragma(warning(disable: warnings)) |
| # define GTEST_DISABLE_MSC_WARNINGS_POP_() \ |
| __pragma(warning(pop)) |
| #else |
| // Not all compilers are MSVC |
| # define GTEST_DISABLE_MSC_WARNINGS_PUSH_(warnings) |
| # define GTEST_DISABLE_MSC_WARNINGS_POP_() |
| #endif |
| |
| // Clang on Windows does not understand MSVC's pragma warning. |
| // We need clang-specific way to disable function deprecation warning. |
| #ifdef __clang__ |
| # define GTEST_DISABLE_MSC_DEPRECATED_PUSH_() \ |
| _Pragma("clang diagnostic push") \ |
| _Pragma("clang diagnostic ignored \"-Wdeprecated-declarations\"") \ |
| _Pragma("clang diagnostic ignored \"-Wdeprecated-implementations\"") |
| #define GTEST_DISABLE_MSC_DEPRECATED_POP_() \ |
| _Pragma("clang diagnostic pop") |
| #else |
| # define GTEST_DISABLE_MSC_DEPRECATED_PUSH_() \ |
| GTEST_DISABLE_MSC_WARNINGS_PUSH_(4996) |
| # define GTEST_DISABLE_MSC_DEPRECATED_POP_() \ |
| GTEST_DISABLE_MSC_WARNINGS_POP_() |
| #endif |
| |
| // Brings in definitions for functions used in the testing::internal::posix |
| // namespace (read, write, close, chdir, isatty, stat). We do not currently |
| // use them on Windows Mobile. |
| #if GTEST_OS_WINDOWS |
| # if !GTEST_OS_WINDOWS_MOBILE |
| # include <direct.h> |
| # include <io.h> |
| # endif |
| // In order to avoid having to include <windows.h>, use forward declaration |
| #if GTEST_OS_WINDOWS_MINGW && !defined(__MINGW64_VERSION_MAJOR) |
| // MinGW defined _CRITICAL_SECTION and _RTL_CRITICAL_SECTION as two |
| // separate (equivalent) structs, instead of using typedef |
| typedef struct _CRITICAL_SECTION GTEST_CRITICAL_SECTION; |
| #else |
| // Assume CRITICAL_SECTION is a typedef of _RTL_CRITICAL_SECTION. |
| // This assumption is verified by |
| // WindowsTypesTest.CRITICAL_SECTIONIs_RTL_CRITICAL_SECTION. |
| typedef struct _RTL_CRITICAL_SECTION GTEST_CRITICAL_SECTION; |
| #endif |
| #else |
| // This assumes that non-Windows OSes provide unistd.h. For OSes where this |
| // is not the case, we need to include headers that provide the functions |
| // mentioned above. |
| # include <unistd.h> |
| # include <strings.h> |
| #endif // GTEST_OS_WINDOWS |
| |
| #if GTEST_OS_LINUX_ANDROID |
| // Used to define __ANDROID_API__ matching the target NDK API level. |
| # include <android/api-level.h> // NOLINT |
| #endif |
| |
| // Defines this to true if and only if Google Test can use POSIX regular |
| // expressions. |
| #ifndef GTEST_HAS_POSIX_RE |
| # if GTEST_OS_LINUX_ANDROID |
| // On Android, <regex.h> is only available starting with Gingerbread. |
| # define GTEST_HAS_POSIX_RE (__ANDROID_API__ >= 9) |
| # else |
| # define GTEST_HAS_POSIX_RE (!GTEST_OS_WINDOWS) |
| # endif |
| #endif |
| |
| #if GTEST_USES_PCRE |
| // The appropriate headers have already been included. |
| |
| #elif GTEST_HAS_POSIX_RE |
| |
| // On some platforms, <regex.h> needs someone to define size_t, and |
| // won't compile otherwise. We can #include it here as we already |
| // included <stdlib.h>, which is guaranteed to define size_t through |
| // <stddef.h>. |
| # include <regex.h> // NOLINT |
| |
| # define GTEST_USES_POSIX_RE 1 |
| |
| #elif GTEST_OS_WINDOWS |
| |
| // <regex.h> is not available on Windows. Use our own simple regex |
| // implementation instead. |
| # define GTEST_USES_SIMPLE_RE 1 |
| |
| #else |
| |
| // <regex.h> may not be available on this platform. Use our own |
| // simple regex implementation instead. |
| # define GTEST_USES_SIMPLE_RE 1 |
| |
| #endif // GTEST_USES_PCRE |
| |
| #ifndef GTEST_HAS_EXCEPTIONS |
| // The user didn't tell us whether exceptions are enabled, so we need |
| // to figure it out. |
| # if defined(_MSC_VER) && defined(_CPPUNWIND) |
| // MSVC defines _CPPUNWIND to 1 if and only if exceptions are enabled. |
| # define GTEST_HAS_EXCEPTIONS 1 |
| # elif defined(__BORLANDC__) |
| // C++Builder's implementation of the STL uses the _HAS_EXCEPTIONS |
| // macro to enable exceptions, so we'll do the same. |
| // Assumes that exceptions are enabled by default. |
| # ifndef _HAS_EXCEPTIONS |
| # define _HAS_EXCEPTIONS 1 |
| # endif // _HAS_EXCEPTIONS |
| # define GTEST_HAS_EXCEPTIONS _HAS_EXCEPTIONS |
| # elif defined(__clang__) |
| // clang defines __EXCEPTIONS if and only if exceptions are enabled before clang |
| // 220714, but if and only if cleanups are enabled after that. In Obj-C++ files, |
| // there can be cleanups for ObjC exceptions which also need cleanups, even if |
| // C++ exceptions are disabled. clang has __has_feature(cxx_exceptions) which |
| // checks for C++ exceptions starting at clang r206352, but which checked for |
| // cleanups prior to that. To reliably check for C++ exception availability with |
| // clang, check for |
| // __EXCEPTIONS && __has_feature(cxx_exceptions). |
| # define GTEST_HAS_EXCEPTIONS (__EXCEPTIONS && __has_feature(cxx_exceptions)) |
| # elif defined(__GNUC__) && __EXCEPTIONS |
| // gcc defines __EXCEPTIONS to 1 if and only if exceptions are enabled. |
| # define GTEST_HAS_EXCEPTIONS 1 |
| # elif defined(__SUNPRO_CC) |
| // Sun Pro CC supports exceptions. However, there is no compile-time way of |
| // detecting whether they are enabled or not. Therefore, we assume that |
| // they are enabled unless the user tells us otherwise. |
| # define GTEST_HAS_EXCEPTIONS 1 |
| # elif defined(__IBMCPP__) && __EXCEPTIONS |
| // xlC defines __EXCEPTIONS to 1 if and only if exceptions are enabled. |
| # define GTEST_HAS_EXCEPTIONS 1 |
| # elif defined(__HP_aCC) |
| // Exception handling is in effect by default in HP aCC compiler. It has to |
| // be turned of by +noeh compiler option if desired. |
| # define GTEST_HAS_EXCEPTIONS 1 |
| # else |
| // For other compilers, we assume exceptions are disabled to be |
| // conservative. |
| # define GTEST_HAS_EXCEPTIONS 0 |
| # endif // defined(_MSC_VER) || defined(__BORLANDC__) |
| #endif // GTEST_HAS_EXCEPTIONS |
| |
| #ifndef GTEST_HAS_STD_WSTRING |
| // The user didn't tell us whether ::std::wstring is available, so we need |
| // to figure it out. |
| // Cygwin 1.7 and below doesn't support ::std::wstring. |
| // Solaris' libc++ doesn't support it either. Android has |
| // no support for it at least as recent as Froyo (2.2). |
| #define GTEST_HAS_STD_WSTRING \ |
| (!(GTEST_OS_LINUX_ANDROID || GTEST_OS_CYGWIN || GTEST_OS_SOLARIS || \ |
| GTEST_OS_HAIKU || GTEST_OS_ESP32 || GTEST_OS_ESP8266)) |
| |
| #endif // GTEST_HAS_STD_WSTRING |
| |
| // Determines whether RTTI is available. |
| #ifndef GTEST_HAS_RTTI |
| // The user didn't tell us whether RTTI is enabled, so we need to |
| // figure it out. |
| |
| # ifdef _MSC_VER |
| |
| #ifdef _CPPRTTI // MSVC defines this macro if and only if RTTI is enabled. |
| # define GTEST_HAS_RTTI 1 |
| # else |
| # define GTEST_HAS_RTTI 0 |
| # endif |
| |
| // Starting with version 4.3.2, gcc defines __GXX_RTTI if and only if RTTI is |
| // enabled. |
| # elif defined(__GNUC__) |
| |
| # ifdef __GXX_RTTI |
| // When building against STLport with the Android NDK and with |
| // -frtti -fno-exceptions, the build fails at link time with undefined |
| // references to __cxa_bad_typeid. Note sure if STL or toolchain bug, |
| // so disable RTTI when detected. |
| # if GTEST_OS_LINUX_ANDROID && defined(_STLPORT_MAJOR) && \ |
| !defined(__EXCEPTIONS) |
| # define GTEST_HAS_RTTI 0 |
| # else |
| # define GTEST_HAS_RTTI 1 |
| # endif // GTEST_OS_LINUX_ANDROID && __STLPORT_MAJOR && !__EXCEPTIONS |
| # else |
| # define GTEST_HAS_RTTI 0 |
| # endif // __GXX_RTTI |
| |
| // Clang defines __GXX_RTTI starting with version 3.0, but its manual recommends |
| // using has_feature instead. has_feature(cxx_rtti) is supported since 2.7, the |
| // first version with C++ support. |
| # elif defined(__clang__) |
| |
| # define GTEST_HAS_RTTI __has_feature(cxx_rtti) |
| |
| // Starting with version 9.0 IBM Visual Age defines __RTTI_ALL__ to 1 if |
| // both the typeid and dynamic_cast features are present. |
| # elif defined(__IBMCPP__) && (__IBMCPP__ >= 900) |
| |
| # ifdef __RTTI_ALL__ |
| # define GTEST_HAS_RTTI 1 |
| # else |
| # define GTEST_HAS_RTTI 0 |
| # endif |
| |
| # else |
| |
| // For all other compilers, we assume RTTI is enabled. |
| # define GTEST_HAS_RTTI 1 |
| |
| # endif // _MSC_VER |
| |
| #endif // GTEST_HAS_RTTI |
| |
| // It's this header's responsibility to #include <typeinfo> when RTTI |
| // is enabled. |
| #if GTEST_HAS_RTTI |
| # include <typeinfo> |
| #endif |
| |
| // Determines whether Google Test can use the pthreads library. |
| #ifndef GTEST_HAS_PTHREAD |
| // The user didn't tell us explicitly, so we make reasonable assumptions about |
| // which platforms have pthreads support. |
| // |
| // To disable threading support in Google Test, add -DGTEST_HAS_PTHREAD=0 |
| // to your compiler flags. |
| #define GTEST_HAS_PTHREAD \ |
| (GTEST_OS_LINUX || GTEST_OS_MAC || GTEST_OS_HPUX || GTEST_OS_QNX || \ |
| GTEST_OS_FREEBSD || GTEST_OS_NACL || GTEST_OS_NETBSD || GTEST_OS_FUCHSIA || \ |
| GTEST_OS_DRAGONFLY || GTEST_OS_GNU_KFREEBSD || GTEST_OS_OPENBSD || \ |
| GTEST_OS_HAIKU) |
| #endif // GTEST_HAS_PTHREAD |
| |
| #if GTEST_HAS_PTHREAD |
| // gtest-port.h guarantees to #include <pthread.h> when GTEST_HAS_PTHREAD is |
| // true. |
| # include <pthread.h> // NOLINT |
| |
| // For timespec and nanosleep, used below. |
| # include <time.h> // NOLINT |
| #endif |
| |
| // Determines whether clone(2) is supported. |
| // Usually it will only be available on Linux, excluding |
| // Linux on the Itanium architecture. |
| // Also see http://linux.die.net/man/2/clone. |
| #ifndef GTEST_HAS_CLONE |
| // The user didn't tell us, so we need to figure it out. |
| |
| # if GTEST_OS_LINUX && !defined(__ia64__) |
| # if GTEST_OS_LINUX_ANDROID |
| // On Android, clone() became available at different API levels for each 32-bit |
| // architecture. |
| # if defined(__LP64__) || \ |
| (defined(__arm__) && __ANDROID_API__ >= 9) || \ |
| (defined(__mips__) && __ANDROID_API__ >= 12) || \ |
| (defined(__i386__) && __ANDROID_API__ >= 17) |
| # define GTEST_HAS_CLONE 1 |
| # else |
| # define GTEST_HAS_CLONE 0 |
| # endif |
| # else |
| # define GTEST_HAS_CLONE 1 |
| # endif |
| # else |
| # define GTEST_HAS_CLONE 0 |
| # endif // GTEST_OS_LINUX && !defined(__ia64__) |
| |
| #endif // GTEST_HAS_CLONE |
| |
| // Determines whether to support stream redirection. This is used to test |
| // output correctness and to implement death tests. |
| #ifndef GTEST_HAS_STREAM_REDIRECTION |
| // By default, we assume that stream redirection is supported on all |
| // platforms except known mobile ones. |
| #if GTEST_OS_WINDOWS_MOBILE || GTEST_OS_WINDOWS_PHONE || \ |
| GTEST_OS_WINDOWS_RT || GTEST_OS_ESP8266 |
| # define GTEST_HAS_STREAM_REDIRECTION 0 |
| # else |
| # define GTEST_HAS_STREAM_REDIRECTION 1 |
| # endif // !GTEST_OS_WINDOWS_MOBILE |
| #endif // GTEST_HAS_STREAM_REDIRECTION |
| |
| // Determines whether to support death tests. |
| // pops up a dialog window that cannot be suppressed programmatically. |
| #if (GTEST_OS_LINUX || GTEST_OS_CYGWIN || GTEST_OS_SOLARIS || \ |
| (GTEST_OS_MAC && !GTEST_OS_IOS) || \ |
| (GTEST_OS_WINDOWS_DESKTOP && _MSC_VER) || GTEST_OS_WINDOWS_MINGW || \ |
| GTEST_OS_AIX || GTEST_OS_HPUX || GTEST_OS_OPENBSD || GTEST_OS_QNX || \ |
| GTEST_OS_FREEBSD || GTEST_OS_NETBSD || GTEST_OS_FUCHSIA || \ |
| GTEST_OS_DRAGONFLY || GTEST_OS_GNU_KFREEBSD || GTEST_OS_HAIKU) |
| # define GTEST_HAS_DEATH_TEST 1 |
| #endif |
| |
| // Determines whether to support type-driven tests. |
| |
| // Typed tests need <typeinfo> and variadic macros, which GCC, VC++ 8.0, |
| // Sun Pro CC, IBM Visual Age, and HP aCC support. |
| #if defined(__GNUC__) || defined(_MSC_VER) || defined(__SUNPRO_CC) || \ |
| defined(__IBMCPP__) || defined(__HP_aCC) |
| # define GTEST_HAS_TYPED_TEST 1 |
| # define GTEST_HAS_TYPED_TEST_P 1 |
| #endif |
| |
| // Determines whether the system compiler uses UTF-16 for encoding wide strings. |
| #define GTEST_WIDE_STRING_USES_UTF16_ \ |
| (GTEST_OS_WINDOWS || GTEST_OS_CYGWIN || GTEST_OS_AIX || GTEST_OS_OS2) |
| |
| // Determines whether test results can be streamed to a socket. |
| #if GTEST_OS_LINUX || GTEST_OS_GNU_KFREEBSD || GTEST_OS_DRAGONFLY || \ |
| GTEST_OS_FREEBSD || GTEST_OS_NETBSD || GTEST_OS_OPENBSD |
| # define GTEST_CAN_STREAM_RESULTS_ 1 |
| #endif |
| |
| // Defines some utility macros. |
| |
| // The GNU compiler emits a warning if nested "if" statements are followed by |
| // an "else" statement and braces are not used to explicitly disambiguate the |
| // "else" binding. This leads to problems with code like: |
| // |
| // if (gate) |
| // ASSERT_*(condition) << "Some message"; |
| // |
| // The "switch (0) case 0:" idiom is used to suppress this. |
| #ifdef __INTEL_COMPILER |
| # define GTEST_AMBIGUOUS_ELSE_BLOCKER_ |
| #else |
| # define GTEST_AMBIGUOUS_ELSE_BLOCKER_ switch (0) case 0: default: // NOLINT |
| #endif |
| |
| // Use this annotation at the end of a struct/class definition to |
| // prevent the compiler from optimizing away instances that are never |
| // used. This is useful when all interesting logic happens inside the |
| // c'tor and / or d'tor. Example: |
| // |
| // struct Foo { |
| // Foo() { ... } |
| // } GTEST_ATTRIBUTE_UNUSED_; |
| // |
| // Also use it after a variable or parameter declaration to tell the |
| // compiler the variable/parameter does not have to be used. |
| #if defined(__GNUC__) && !defined(COMPILER_ICC) |
| # define GTEST_ATTRIBUTE_UNUSED_ __attribute__ ((unused)) |
| #elif defined(__clang__) |
| # if __has_attribute(unused) |
| # define GTEST_ATTRIBUTE_UNUSED_ __attribute__ ((unused)) |
| # endif |
| #endif |
| #ifndef GTEST_ATTRIBUTE_UNUSED_ |
| # define GTEST_ATTRIBUTE_UNUSED_ |
| #endif |
| |
| // Use this annotation before a function that takes a printf format string. |
| #if (defined(__GNUC__) || defined(__clang__)) && !defined(COMPILER_ICC) |
| # if defined(__MINGW_PRINTF_FORMAT) |
| // MinGW has two different printf implementations. Ensure the format macro |
| // matches the selected implementation. See |
| // https://sourceforge.net/p/mingw-w64/wiki2/gnu%20printf/. |
| # define GTEST_ATTRIBUTE_PRINTF_(string_index, first_to_check) \ |
| __attribute__((__format__(__MINGW_PRINTF_FORMAT, string_index, \ |
| first_to_check))) |
| # else |
| # define GTEST_ATTRIBUTE_PRINTF_(string_index, first_to_check) \ |
| __attribute__((__format__(__printf__, string_index, first_to_check))) |
| # endif |
| #else |
| # define GTEST_ATTRIBUTE_PRINTF_(string_index, first_to_check) |
| #endif |
| |
| |
| // A macro to disallow copy operator= |
| // This should be used in the private: declarations for a class. |
| #define GTEST_DISALLOW_ASSIGN_(type) \ |
| type& operator=(type const &) = delete |
| |
| // A macro to disallow copy constructor and operator= |
| // This should be used in the private: declarations for a class. |
| #define GTEST_DISALLOW_COPY_AND_ASSIGN_(type) \ |
| type(type const&) = delete; \ |
| type& operator=(type const&) = delete |
| |
| // A macro to disallow move operator= |
| // This should be used in the private: declarations for a class. |
| #define GTEST_DISALLOW_MOVE_ASSIGN_(type) \ |
| type& operator=(type &&) noexcept = delete |
| |
| // A macro to disallow move constructor and operator= |
| // This should be used in the private: declarations for a class. |
| #define GTEST_DISALLOW_MOVE_AND_ASSIGN_(type) \ |
| type(type&&) noexcept = delete; \ |
| type& operator=(type&&) noexcept = delete |
| |
| // Tell the compiler to warn about unused return values for functions declared |
| // with this macro. The macro should be used on function declarations |
| // following the argument list: |
| // |
| // Sprocket* AllocateSprocket() GTEST_MUST_USE_RESULT_; |
| #if defined(__GNUC__) && !defined(COMPILER_ICC) |
| # define GTEST_MUST_USE_RESULT_ __attribute__ ((warn_unused_result)) |
| #else |
| # define GTEST_MUST_USE_RESULT_ |
| #endif // __GNUC__ && !COMPILER_ICC |
| |
| // MS C++ compiler emits warning when a conditional expression is compile time |
| // constant. In some contexts this warning is false positive and needs to be |
| // suppressed. Use the following two macros in such cases: |
| // |
| // GTEST_INTENTIONAL_CONST_COND_PUSH_() |
| // while (true) { |
| // GTEST_INTENTIONAL_CONST_COND_POP_() |
| // } |
| # define GTEST_INTENTIONAL_CONST_COND_PUSH_() \ |
| GTEST_DISABLE_MSC_WARNINGS_PUSH_(4127) |
| # define GTEST_INTENTIONAL_CONST_COND_POP_() \ |
| GTEST_DISABLE_MSC_WARNINGS_POP_() |
| |
| // Determine whether the compiler supports Microsoft's Structured Exception |
| // Handling. This is supported by several Windows compilers but generally |
| // does not exist on any other system. |
| #ifndef GTEST_HAS_SEH |
| // The user didn't tell us, so we need to figure it out. |
| |
| # if defined(_MSC_VER) || defined(__BORLANDC__) |
| // These two compilers are known to support SEH. |
| # define GTEST_HAS_SEH 1 |
| # else |
| // Assume no SEH. |
| # define GTEST_HAS_SEH 0 |
| # endif |
| |
| #endif // GTEST_HAS_SEH |
| |
| #ifndef GTEST_IS_THREADSAFE |
| |
| #define GTEST_IS_THREADSAFE \ |
| (GTEST_HAS_MUTEX_AND_THREAD_LOCAL_ || \ |
| (GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT) || \ |
| GTEST_HAS_PTHREAD) |
| |
| #endif // GTEST_IS_THREADSAFE |
| |
| // GTEST_API_ qualifies all symbols that must be exported. The definitions below |
| // are guarded by #ifndef to give embedders a chance to define GTEST_API_ in |
| // gtest/internal/custom/gtest-port.h |
| #ifndef GTEST_API_ |
| |
| #ifdef _MSC_VER |
| # if GTEST_LINKED_AS_SHARED_LIBRARY |
| # define GTEST_API_ __declspec(dllimport) |
| # elif GTEST_CREATE_SHARED_LIBRARY |
| # define GTEST_API_ __declspec(dllexport) |
| # endif |
| #elif __GNUC__ >= 4 || defined(__clang__) |
| # define GTEST_API_ __attribute__((visibility ("default"))) |
| #endif // _MSC_VER |
| |
| #endif // GTEST_API_ |
| |
| #ifndef GTEST_API_ |
| # define GTEST_API_ |
| #endif // GTEST_API_ |
| |
| #ifndef GTEST_DEFAULT_DEATH_TEST_STYLE |
| # define GTEST_DEFAULT_DEATH_TEST_STYLE "fast" |
| #endif // GTEST_DEFAULT_DEATH_TEST_STYLE |
| |
| #ifdef __GNUC__ |
| // Ask the compiler to never inline a given function. |
| # define GTEST_NO_INLINE_ __attribute__((noinline)) |
| #else |
| # define GTEST_NO_INLINE_ |
| #endif |
| |
| // _LIBCPP_VERSION is defined by the libc++ library from the LLVM project. |
| #if !defined(GTEST_HAS_CXXABI_H_) |
| # if defined(__GLIBCXX__) || (defined(_LIBCPP_VERSION) && !defined(_MSC_VER)) |
| # define GTEST_HAS_CXXABI_H_ 1 |
| # else |
| # define GTEST_HAS_CXXABI_H_ 0 |
| # endif |
| #endif |
| |
| // A function level attribute to disable checking for use of uninitialized |
| // memory when built with MemorySanitizer. |
| #if defined(__clang__) |
| # if __has_feature(memory_sanitizer) |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_MEMORY_ \ |
| __attribute__((no_sanitize_memory)) |
| # else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_MEMORY_ |
| # endif // __has_feature(memory_sanitizer) |
| #else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_MEMORY_ |
| #endif // __clang__ |
| |
| // A function level attribute to disable AddressSanitizer instrumentation. |
| #if defined(__clang__) |
| # if __has_feature(address_sanitizer) |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_ADDRESS_ \ |
| __attribute__((no_sanitize_address)) |
| # else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_ADDRESS_ |
| # endif // __has_feature(address_sanitizer) |
| #else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_ADDRESS_ |
| #endif // __clang__ |
| |
| // A function level attribute to disable HWAddressSanitizer instrumentation. |
| #if defined(__clang__) |
| # if __has_feature(hwaddress_sanitizer) |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_HWADDRESS_ \ |
| __attribute__((no_sanitize("hwaddress"))) |
| # else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_HWADDRESS_ |
| # endif // __has_feature(hwaddress_sanitizer) |
| #else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_HWADDRESS_ |
| #endif // __clang__ |
| |
| // A function level attribute to disable ThreadSanitizer instrumentation. |
| #if defined(__clang__) |
| # if __has_feature(thread_sanitizer) |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_THREAD_ \ |
| __attribute__((no_sanitize_thread)) |
| # else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_THREAD_ |
| # endif // __has_feature(thread_sanitizer) |
| #else |
| # define GTEST_ATTRIBUTE_NO_SANITIZE_THREAD_ |
| #endif // __clang__ |
| |
| namespace testing { |
| |
| class Message; |
| |
| // Legacy imports for backwards compatibility. |
| // New code should use std:: names directly. |
| using std::get; |
| using std::make_tuple; |
| using std::tuple; |
| using std::tuple_element; |
| using std::tuple_size; |
| |
| namespace internal { |
| |
| // A secret type that Google Test users don't know about. It has no |
| // definition on purpose. Therefore it's impossible to create a |
| // Secret object, which is what we want. |
| class Secret; |
| |
| // The GTEST_COMPILE_ASSERT_ is a legacy macro used to verify that a compile |
| // time expression is true (in new code, use static_assert instead). For |
| // example, you could use it to verify the size of a static array: |
| // |
| // GTEST_COMPILE_ASSERT_(GTEST_ARRAY_SIZE_(names) == NUM_NAMES, |
| // names_incorrect_size); |
| // |
| // The second argument to the macro must be a valid C++ identifier. If the |
| // expression is false, compiler will issue an error containing this identifier. |
| #define GTEST_COMPILE_ASSERT_(expr, msg) static_assert(expr, #msg) |
| |
| // A helper for suppressing warnings on constant condition. It just |
| // returns 'condition'. |
| GTEST_API_ bool IsTrue(bool condition); |
| |
| // Defines RE. |
| |
| #if GTEST_USES_PCRE |
| // if used, PCRE is injected by custom/gtest-port.h |
| #elif GTEST_USES_POSIX_RE || GTEST_USES_SIMPLE_RE |
| |
| // A simple C++ wrapper for <regex.h>. It uses the POSIX Extended |
| // Regular Expression syntax. |
| class GTEST_API_ RE { |
| public: |
| // A copy constructor is required by the Standard to initialize object |
| // references from r-values. |
| RE(const RE& other) { Init(other.pattern()); } |
| |
| // Constructs an RE from a string. |
| RE(const ::std::string& regex) { Init(regex.c_str()); } // NOLINT |
| |
| RE(const char* regex) { Init(regex); } // NOLINT |
| ~RE(); |
| |
| // Returns the string representation of the regex. |
| const char* pattern() const { return pattern_; } |
| |
| // FullMatch(str, re) returns true if and only if regular expression re |
| // matches the entire str. |
| // PartialMatch(str, re) returns true if and only if regular expression re |
| // matches a substring of str (including str itself). |
| static bool FullMatch(const ::std::string& str, const RE& re) { |
| return FullMatch(str.c_str(), re); |
| } |
| static bool PartialMatch(const ::std::string& str, const RE& re) { |
| return PartialMatch(str.c_str(), re); |
| } |
| |
| static bool FullMatch(const char* str, const RE& re); |
| static bool PartialMatch(const char* str, const RE& re); |
| |
| private: |
| void Init(const char* regex); |
| const char* pattern_; |
| bool is_valid_; |
| |
| # if GTEST_USES_POSIX_RE |
| |
| regex_t full_regex_; // For FullMatch(). |
| regex_t partial_regex_; // For PartialMatch(). |
| |
| # else // GTEST_USES_SIMPLE_RE |
| |
| const char* full_pattern_; // For FullMatch(); |
| |
| # endif |
| }; |
| |
| #endif // GTEST_USES_PCRE |
| |
| // Formats a source file path and a line number as they would appear |
| // in an error message from the compiler used to compile this code. |
| GTEST_API_ ::std::string FormatFileLocation(const char* file, int line); |
| |
| // Formats a file location for compiler-independent XML output. |
| // Although this function is not platform dependent, we put it next to |
| // FormatFileLocation in order to contrast the two functions. |
| GTEST_API_ ::std::string FormatCompilerIndependentFileLocation(const char* file, |
| int line); |
| |
| // Defines logging utilities: |
| // GTEST_LOG_(severity) - logs messages at the specified severity level. The |
| // message itself is streamed into the macro. |
| // LogToStderr() - directs all log messages to stderr. |
| // FlushInfoLog() - flushes informational log messages. |
| |
| enum GTestLogSeverity { |
| GTEST_INFO, |
| GTEST_WARNING, |
| GTEST_ERROR, |
| GTEST_FATAL |
| }; |
| |
| // Formats log entry severity, provides a stream object for streaming the |
| // log message, and terminates the message with a newline when going out of |
| // scope. |
| class GTEST_API_ GTestLog { |
| public: |
| GTestLog(GTestLogSeverity severity, const char* file, int line); |
| |
| // Flushes the buffers and, if severity is GTEST_FATAL, aborts the program. |
| ~GTestLog(); |
| |
| ::std::ostream& GetStream() { return ::std::cerr; } |
| |
| private: |
| const GTestLogSeverity severity_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(GTestLog); |
| }; |
| |
| #if !defined(GTEST_LOG_) |
| |
| # define GTEST_LOG_(severity) \ |
| ::testing::internal::GTestLog(::testing::internal::GTEST_##severity, \ |
| __FILE__, __LINE__).GetStream() |
| |
| inline void LogToStderr() {} |
| inline void FlushInfoLog() { fflush(nullptr); } |
| |
| #endif // !defined(GTEST_LOG_) |
| |
| #if !defined(GTEST_CHECK_) |
| // INTERNAL IMPLEMENTATION - DO NOT USE. |
| // |
| // GTEST_CHECK_ is an all-mode assert. It aborts the program if the condition |
| // is not satisfied. |
| // Synopsys: |
| // GTEST_CHECK_(boolean_condition); |
| // or |
| // GTEST_CHECK_(boolean_condition) << "Additional message"; |
| // |
| // This checks the condition and if the condition is not satisfied |
| // it prints message about the condition violation, including the |
| // condition itself, plus additional message streamed into it, if any, |
| // and then it aborts the program. It aborts the program irrespective of |
| // whether it is built in the debug mode or not. |
| # define GTEST_CHECK_(condition) \ |
| GTEST_AMBIGUOUS_ELSE_BLOCKER_ \ |
| if (::testing::internal::IsTrue(condition)) \ |
| ; \ |
| else \ |
| GTEST_LOG_(FATAL) << "Condition " #condition " failed. " |
| #endif // !defined(GTEST_CHECK_) |
| |
| // An all-mode assert to verify that the given POSIX-style function |
| // call returns 0 (indicating success). Known limitation: this |
| // doesn't expand to a balanced 'if' statement, so enclose the macro |
| // in {} if you need to use it as the only statement in an 'if' |
| // branch. |
| #define GTEST_CHECK_POSIX_SUCCESS_(posix_call) \ |
| if (const int gtest_error = (posix_call)) \ |
| GTEST_LOG_(FATAL) << #posix_call << "failed with error " \ |
| << gtest_error |
| |
| // Transforms "T" into "const T&" according to standard reference collapsing |
| // rules (this is only needed as a backport for C++98 compilers that do not |
| // support reference collapsing). Specifically, it transforms: |
| // |
| // char ==> const char& |
| // const char ==> const char& |
| // char& ==> char& |
| // const char& ==> const char& |
| // |
| // Note that the non-const reference will not have "const" added. This is |
| // standard, and necessary so that "T" can always bind to "const T&". |
| template <typename T> |
| struct ConstRef { typedef const T& type; }; |
| template <typename T> |
| struct ConstRef<T&> { typedef T& type; }; |
| |
| // The argument T must depend on some template parameters. |
| #define GTEST_REFERENCE_TO_CONST_(T) \ |
| typename ::testing::internal::ConstRef<T>::type |
| |
| // INTERNAL IMPLEMENTATION - DO NOT USE IN USER CODE. |
| // |
| // Use ImplicitCast_ as a safe version of static_cast for upcasting in |
| // the type hierarchy (e.g. casting a Foo* to a SuperclassOfFoo* or a |
| // const Foo*). When you use ImplicitCast_, the compiler checks that |
| // the cast is safe. Such explicit ImplicitCast_s are necessary in |
| // surprisingly many situations where C++ demands an exact type match |
| // instead of an argument type convertable to a target type. |
| // |
| // The syntax for using ImplicitCast_ is the same as for static_cast: |
| // |
| // ImplicitCast_<ToType>(expr) |
| // |
| // ImplicitCast_ would have been part of the C++ standard library, |
| // but the proposal was submitted too late. It will probably make |
| // its way into the language in the future. |
| // |
| // This relatively ugly name is intentional. It prevents clashes with |
| // similar functions users may have (e.g., implicit_cast). The internal |
| // namespace alone is not enough because the function can be found by ADL. |
| template<typename To> |
| inline To ImplicitCast_(To x) { return x; } |
| |
| // When you upcast (that is, cast a pointer from type Foo to type |
| // SuperclassOfFoo), it's fine to use ImplicitCast_<>, since upcasts |
| // always succeed. When you downcast (that is, cast a pointer from |
| // type Foo to type SubclassOfFoo), static_cast<> isn't safe, because |
| // how do you know the pointer is really of type SubclassOfFoo? It |
| // could be a bare Foo, or of type DifferentSubclassOfFoo. Thus, |
| // when you downcast, you should use this macro. In debug mode, we |
| // use dynamic_cast<> to double-check the downcast is legal (we die |
| // if it's not). In normal mode, we do the efficient static_cast<> |
| // instead. Thus, it's important to test in debug mode to make sure |
| // the cast is legal! |
| // This is the only place in the code we should use dynamic_cast<>. |
| // In particular, you SHOULDN'T be using dynamic_cast<> in order to |
| // do RTTI (eg code like this: |
| // if (dynamic_cast<Subclass1>(foo)) HandleASubclass1Object(foo); |
| // if (dynamic_cast<Subclass2>(foo)) HandleASubclass2Object(foo); |
| // You should design the code some other way not to need this. |
| // |
| // This relatively ugly name is intentional. It prevents clashes with |
| // similar functions users may have (e.g., down_cast). The internal |
| // namespace alone is not enough because the function can be found by ADL. |
| template<typename To, typename From> // use like this: DownCast_<T*>(foo); |
| inline To DownCast_(From* f) { // so we only accept pointers |
| // Ensures that To is a sub-type of From *. This test is here only |
| // for compile-time type checking, and has no overhead in an |
| // optimized build at run-time, as it will be optimized away |
| // completely. |
| GTEST_INTENTIONAL_CONST_COND_PUSH_() |
| if (false) { |
| GTEST_INTENTIONAL_CONST_COND_POP_() |
| const To to = nullptr; |
| ::testing::internal::ImplicitCast_<From*>(to); |
| } |
| |
| #if GTEST_HAS_RTTI |
| // RTTI: debug mode only! |
| GTEST_CHECK_(f == nullptr || dynamic_cast<To>(f) != nullptr); |
| #endif |
| return static_cast<To>(f); |
| } |
| |
| // Downcasts the pointer of type Base to Derived. |
| // Derived must be a subclass of Base. The parameter MUST |
| // point to a class of type Derived, not any subclass of it. |
| // When RTTI is available, the function performs a runtime |
| // check to enforce this. |
| template <class Derived, class Base> |
| Derived* CheckedDowncastToActualType(Base* base) { |
| #if GTEST_HAS_RTTI |
| GTEST_CHECK_(typeid(*base) == typeid(Derived)); |
| #endif |
| |
| #if GTEST_HAS_DOWNCAST_ |
| return ::down_cast<Derived*>(base); |
| #elif GTEST_HAS_RTTI |
| return dynamic_cast<Derived*>(base); // NOLINT |
| #else |
| return static_cast<Derived*>(base); // Poor man's downcast. |
| #endif |
| } |
| |
| #if GTEST_HAS_STREAM_REDIRECTION |
| |
| // Defines the stderr capturer: |
| // CaptureStdout - starts capturing stdout. |
| // GetCapturedStdout - stops capturing stdout and returns the captured string. |
| // CaptureStderr - starts capturing stderr. |
| // GetCapturedStderr - stops capturing stderr and returns the captured string. |
| // |
| GTEST_API_ void CaptureStdout(); |
| GTEST_API_ std::string GetCapturedStdout(); |
| GTEST_API_ void CaptureStderr(); |
| GTEST_API_ std::string GetCapturedStderr(); |
| |
| #endif // GTEST_HAS_STREAM_REDIRECTION |
| // Returns the size (in bytes) of a file. |
| GTEST_API_ size_t GetFileSize(FILE* file); |
| |
| // Reads the entire content of a file as a string. |
| GTEST_API_ std::string ReadEntireFile(FILE* file); |
| |
| // All command line arguments. |
| GTEST_API_ std::vector<std::string> GetArgvs(); |
| |
| #if GTEST_HAS_DEATH_TEST |
| |
| std::vector<std::string> GetInjectableArgvs(); |
| // Deprecated: pass the args vector by value instead. |
| void SetInjectableArgvs(const std::vector<std::string>* new_argvs); |
| void SetInjectableArgvs(const std::vector<std::string>& new_argvs); |
| void ClearInjectableArgvs(); |
| |
| #endif // GTEST_HAS_DEATH_TEST |
| |
| // Defines synchronization primitives. |
| #if GTEST_IS_THREADSAFE |
| # if GTEST_HAS_PTHREAD |
| // Sleeps for (roughly) n milliseconds. This function is only for testing |
| // Google Test's own constructs. Don't use it in user tests, either |
| // directly or indirectly. |
| inline void SleepMilliseconds(int n) { |
| const timespec time = { |
| 0, // 0 seconds. |
| n * 1000L * 1000L, // And n ms. |
| }; |
| nanosleep(&time, nullptr); |
| } |
| # endif // GTEST_HAS_PTHREAD |
| |
| # if GTEST_HAS_NOTIFICATION_ |
| // Notification has already been imported into the namespace. |
| // Nothing to do here. |
| |
| # elif GTEST_HAS_PTHREAD |
| // Allows a controller thread to pause execution of newly created |
| // threads until notified. Instances of this class must be created |
| // and destroyed in the controller thread. |
| // |
| // This class is only for testing Google Test's own constructs. Do not |
| // use it in user tests, either directly or indirectly. |
| class Notification { |
| public: |
| Notification() : notified_(false) { |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_init(&mutex_, nullptr)); |
| } |
| ~Notification() { |
| pthread_mutex_destroy(&mutex_); |
| } |
| |
| // Notifies all threads created with this notification to start. Must |
| // be called from the controller thread. |
| void Notify() { |
| pthread_mutex_lock(&mutex_); |
| notified_ = true; |
| pthread_mutex_unlock(&mutex_); |
| } |
| |
| // Blocks until the controller thread notifies. Must be called from a test |
| // thread. |
| void WaitForNotification() { |
| for (;;) { |
| pthread_mutex_lock(&mutex_); |
| const bool notified = notified_; |
| pthread_mutex_unlock(&mutex_); |
| if (notified) |
| break; |
| SleepMilliseconds(10); |
| } |
| } |
| |
| private: |
| pthread_mutex_t mutex_; |
| bool notified_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(Notification); |
| }; |
| |
| # elif GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT |
| |
| GTEST_API_ void SleepMilliseconds(int n); |
| |
| // Provides leak-safe Windows kernel handle ownership. |
| // Used in death tests and in threading support. |
| class GTEST_API_ AutoHandle { |
| public: |
| // Assume that Win32 HANDLE type is equivalent to void*. Doing so allows us to |
| // avoid including <windows.h> in this header file. Including <windows.h> is |
| // undesirable because it defines a lot of symbols and macros that tend to |
| // conflict with client code. This assumption is verified by |
| // WindowsTypesTest.HANDLEIsVoidStar. |
| typedef void* Handle; |
| AutoHandle(); |
| explicit AutoHandle(Handle handle); |
| |
| ~AutoHandle(); |
| |
| Handle Get() const; |
| void Reset(); |
| void Reset(Handle handle); |
| |
| private: |
| // Returns true if and only if the handle is a valid handle object that can be |
| // closed. |
| bool IsCloseable() const; |
| |
| Handle handle_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(AutoHandle); |
| }; |
| |
| // Allows a controller thread to pause execution of newly created |
| // threads until notified. Instances of this class must be created |
| // and destroyed in the controller thread. |
| // |
| // This class is only for testing Google Test's own constructs. Do not |
| // use it in user tests, either directly or indirectly. |
| class GTEST_API_ Notification { |
| public: |
| Notification(); |
| void Notify(); |
| void WaitForNotification(); |
| |
| private: |
| AutoHandle event_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(Notification); |
| }; |
| # endif // GTEST_HAS_NOTIFICATION_ |
| |
| // On MinGW, we can have both GTEST_OS_WINDOWS and GTEST_HAS_PTHREAD |
| // defined, but we don't want to use MinGW's pthreads implementation, which |
| // has conformance problems with some versions of the POSIX standard. |
| # if GTEST_HAS_PTHREAD && !GTEST_OS_WINDOWS_MINGW |
| |
| // As a C-function, ThreadFuncWithCLinkage cannot be templated itself. |
| // Consequently, it cannot select a correct instantiation of ThreadWithParam |
| // in order to call its Run(). Introducing ThreadWithParamBase as a |
| // non-templated base class for ThreadWithParam allows us to bypass this |
| // problem. |
| class ThreadWithParamBase { |
| public: |
| virtual ~ThreadWithParamBase() {} |
| virtual void Run() = 0; |
| }; |
| |
| // pthread_create() accepts a pointer to a function type with the C linkage. |
| // According to the Standard (7.5/1), function types with different linkages |
| // are different even if they are otherwise identical. Some compilers (for |
| // example, SunStudio) treat them as different types. Since class methods |
| // cannot be defined with C-linkage we need to define a free C-function to |
| // pass into pthread_create(). |
| extern "C" inline void* ThreadFuncWithCLinkage(void* thread) { |
| static_cast<ThreadWithParamBase*>(thread)->Run(); |
| return nullptr; |
| } |
| |
| // Helper class for testing Google Test's multi-threading constructs. |
| // To use it, write: |
| // |
| // void ThreadFunc(int param) { /* Do things with param */ } |
| // Notification thread_can_start; |
| // ... |
| // // The thread_can_start parameter is optional; you can supply NULL. |
| // ThreadWithParam<int> thread(&ThreadFunc, 5, &thread_can_start); |
| // thread_can_start.Notify(); |
| // |
| // These classes are only for testing Google Test's own constructs. Do |
| // not use them in user tests, either directly or indirectly. |
| template <typename T> |
| class ThreadWithParam : public ThreadWithParamBase { |
| public: |
| typedef void UserThreadFunc(T); |
| |
| ThreadWithParam(UserThreadFunc* func, T param, Notification* thread_can_start) |
| : func_(func), |
| param_(param), |
| thread_can_start_(thread_can_start), |
| finished_(false) { |
| ThreadWithParamBase* const base = this; |
| // The thread can be created only after all fields except thread_ |
| // have been initialized. |
| GTEST_CHECK_POSIX_SUCCESS_( |
| pthread_create(&thread_, nullptr, &ThreadFuncWithCLinkage, base)); |
| } |
| ~ThreadWithParam() override { Join(); } |
| |
| void Join() { |
| if (!finished_) { |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_join(thread_, nullptr)); |
| finished_ = true; |
| } |
| } |
| |
| void Run() override { |
| if (thread_can_start_ != nullptr) thread_can_start_->WaitForNotification(); |
| func_(param_); |
| } |
| |
| private: |
| UserThreadFunc* const func_; // User-supplied thread function. |
| const T param_; // User-supplied parameter to the thread function. |
| // When non-NULL, used to block execution until the controller thread |
| // notifies. |
| Notification* const thread_can_start_; |
| bool finished_; // true if and only if we know that the thread function has |
| // finished. |
| pthread_t thread_; // The native thread object. |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadWithParam); |
| }; |
| # endif // !GTEST_OS_WINDOWS && GTEST_HAS_PTHREAD || |
| // GTEST_HAS_MUTEX_AND_THREAD_LOCAL_ |
| |
| # if GTEST_HAS_MUTEX_AND_THREAD_LOCAL_ |
| // Mutex and ThreadLocal have already been imported into the namespace. |
| // Nothing to do here. |
| |
| # elif GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT |
| |
| // Mutex implements mutex on Windows platforms. It is used in conjunction |
| // with class MutexLock: |
| // |
| // Mutex mutex; |
| // ... |
| // MutexLock lock(&mutex); // Acquires the mutex and releases it at the |
| // // end of the current scope. |
| // |
| // A static Mutex *must* be defined or declared using one of the following |
| // macros: |
| // GTEST_DEFINE_STATIC_MUTEX_(g_some_mutex); |
| // GTEST_DECLARE_STATIC_MUTEX_(g_some_mutex); |
| // |
| // (A non-static Mutex is defined/declared in the usual way). |
| class GTEST_API_ Mutex { |
| public: |
| enum MutexType { kStatic = 0, kDynamic = 1 }; |
| // We rely on kStaticMutex being 0 as it is to what the linker initializes |
| // type_ in static mutexes. critical_section_ will be initialized lazily |
| // in ThreadSafeLazyInit(). |
| enum StaticConstructorSelector { kStaticMutex = 0 }; |
| |
| // This constructor intentionally does nothing. It relies on type_ being |
| // statically initialized to 0 (effectively setting it to kStatic) and on |
| // ThreadSafeLazyInit() to lazily initialize the rest of the members. |
| explicit Mutex(StaticConstructorSelector /*dummy*/) {} |
| |
| Mutex(); |
| ~Mutex(); |
| |
| void Lock(); |
| |
| void Unlock(); |
| |
| // Does nothing if the current thread holds the mutex. Otherwise, crashes |
| // with high probability. |
| void AssertHeld(); |
| |
| private: |
| // Initializes owner_thread_id_ and critical_section_ in static mutexes. |
| void ThreadSafeLazyInit(); |
| |
| // Per https://blogs.msdn.microsoft.com/oldnewthing/20040223-00/?p=40503, |
| // we assume that 0 is an invalid value for thread IDs. |
| unsigned int owner_thread_id_; |
| |
| // For static mutexes, we rely on these members being initialized to zeros |
| // by the linker. |
| MutexType type_; |
| long critical_section_init_phase_; // NOLINT |
| GTEST_CRITICAL_SECTION* critical_section_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(Mutex); |
| }; |
| |
| # define GTEST_DECLARE_STATIC_MUTEX_(mutex) \ |
| extern ::testing::internal::Mutex mutex |
| |
| # define GTEST_DEFINE_STATIC_MUTEX_(mutex) \ |
| ::testing::internal::Mutex mutex(::testing::internal::Mutex::kStaticMutex) |
| |
| // We cannot name this class MutexLock because the ctor declaration would |
| // conflict with a macro named MutexLock, which is defined on some |
| // platforms. That macro is used as a defensive measure to prevent against |
| // inadvertent misuses of MutexLock like "MutexLock(&mu)" rather than |
| // "MutexLock l(&mu)". Hence the typedef trick below. |
| class GTestMutexLock { |
| public: |
| explicit GTestMutexLock(Mutex* mutex) |
| : mutex_(mutex) { mutex_->Lock(); } |
| |
| ~GTestMutexLock() { mutex_->Unlock(); } |
| |
| private: |
| Mutex* const mutex_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(GTestMutexLock); |
| }; |
| |
| typedef GTestMutexLock MutexLock; |
| |
| // Base class for ValueHolder<T>. Allows a caller to hold and delete a value |
| // without knowing its type. |
| class ThreadLocalValueHolderBase { |
| public: |
| virtual ~ThreadLocalValueHolderBase() {} |
| }; |
| |
| // Provides a way for a thread to send notifications to a ThreadLocal |
| // regardless of its parameter type. |
| class ThreadLocalBase { |
| public: |
| // Creates a new ValueHolder<T> object holding a default value passed to |
| // this ThreadLocal<T>'s constructor and returns it. It is the caller's |
| // responsibility not to call this when the ThreadLocal<T> instance already |
| // has a value on the current thread. |
| virtual ThreadLocalValueHolderBase* NewValueForCurrentThread() const = 0; |
| |
| protected: |
| ThreadLocalBase() {} |
| virtual ~ThreadLocalBase() {} |
| |
| private: |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadLocalBase); |
| }; |
| |
| // Maps a thread to a set of ThreadLocals that have values instantiated on that |
| // thread and notifies them when the thread exits. A ThreadLocal instance is |
| // expected to persist until all threads it has values on have terminated. |
| class GTEST_API_ ThreadLocalRegistry { |
| public: |
| // Registers thread_local_instance as having value on the current thread. |
| // Returns a value that can be used to identify the thread from other threads. |
| static ThreadLocalValueHolderBase* GetValueOnCurrentThread( |
| const ThreadLocalBase* thread_local_instance); |
| |
| // Invoked when a ThreadLocal instance is destroyed. |
| static void OnThreadLocalDestroyed( |
| const ThreadLocalBase* thread_local_instance); |
| }; |
| |
| class GTEST_API_ ThreadWithParamBase { |
| public: |
| void Join(); |
| |
| protected: |
| class Runnable { |
| public: |
| virtual ~Runnable() {} |
| virtual void Run() = 0; |
| }; |
| |
| ThreadWithParamBase(Runnable *runnable, Notification* thread_can_start); |
| virtual ~ThreadWithParamBase(); |
| |
| private: |
| AutoHandle thread_; |
| }; |
| |
| // Helper class for testing Google Test's multi-threading constructs. |
| template <typename T> |
| class ThreadWithParam : public ThreadWithParamBase { |
| public: |
| typedef void UserThreadFunc(T); |
| |
| ThreadWithParam(UserThreadFunc* func, T param, Notification* thread_can_start) |
| : ThreadWithParamBase(new RunnableImpl(func, param), thread_can_start) { |
| } |
| virtual ~ThreadWithParam() {} |
| |
| private: |
| class RunnableImpl : public Runnable { |
| public: |
| RunnableImpl(UserThreadFunc* func, T param) |
| : func_(func), |
| param_(param) { |
| } |
| virtual ~RunnableImpl() {} |
| virtual void Run() { |
| func_(param_); |
| } |
| |
| private: |
| UserThreadFunc* const func_; |
| const T param_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(RunnableImpl); |
| }; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadWithParam); |
| }; |
| |
| // Implements thread-local storage on Windows systems. |
| // |
| // // Thread 1 |
| // ThreadLocal<int> tl(100); // 100 is the default value for each thread. |
| // |
| // // Thread 2 |
| // tl.set(150); // Changes the value for thread 2 only. |
| // EXPECT_EQ(150, tl.get()); |
| // |
| // // Thread 1 |
| // EXPECT_EQ(100, tl.get()); // In thread 1, tl has the original value. |
| // tl.set(200); |
| // EXPECT_EQ(200, tl.get()); |
| // |
| // The template type argument T must have a public copy constructor. |
| // In addition, the default ThreadLocal constructor requires T to have |
| // a public default constructor. |
| // |
| // The users of a TheadLocal instance have to make sure that all but one |
| // threads (including the main one) using that instance have exited before |
| // destroying it. Otherwise, the per-thread objects managed for them by the |
| // ThreadLocal instance are not guaranteed to be destroyed on all platforms. |
| // |
| // Google Test only uses global ThreadLocal objects. That means they |
| // will die after main() has returned. Therefore, no per-thread |
| // object managed by Google Test will be leaked as long as all threads |
| // using Google Test have exited when main() returns. |
| template <typename T> |
| class ThreadLocal : public ThreadLocalBase { |
| public: |
| ThreadLocal() : default_factory_(new DefaultValueHolderFactory()) {} |
| explicit ThreadLocal(const T& value) |
| : default_factory_(new InstanceValueHolderFactory(value)) {} |
| |
| ~ThreadLocal() { ThreadLocalRegistry::OnThreadLocalDestroyed(this); } |
| |
| T* pointer() { return GetOrCreateValue(); } |
| const T* pointer() const { return GetOrCreateValue(); } |
| const T& get() const { return *pointer(); } |
| void set(const T& value) { *pointer() = value; } |
| |
| private: |
| // Holds a value of T. Can be deleted via its base class without the caller |
| // knowing the type of T. |
| class ValueHolder : public ThreadLocalValueHolderBase { |
| public: |
| ValueHolder() : value_() {} |
| explicit ValueHolder(const T& value) : value_(value) {} |
| |
| T* pointer() { return &value_; } |
| |
| private: |
| T value_; |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolder); |
| }; |
| |
| |
| T* GetOrCreateValue() const { |
| return static_cast<ValueHolder*>( |
| ThreadLocalRegistry::GetValueOnCurrentThread(this))->pointer(); |
| } |
| |
| virtual ThreadLocalValueHolderBase* NewValueForCurrentThread() const { |
| return default_factory_->MakeNewHolder(); |
| } |
| |
| class ValueHolderFactory { |
| public: |
| ValueHolderFactory() {} |
| virtual ~ValueHolderFactory() {} |
| virtual ValueHolder* MakeNewHolder() const = 0; |
| |
| private: |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolderFactory); |
| }; |
| |
| class DefaultValueHolderFactory : public ValueHolderFactory { |
| public: |
| DefaultValueHolderFactory() {} |
| ValueHolder* MakeNewHolder() const override { return new ValueHolder(); } |
| |
| private: |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(DefaultValueHolderFactory); |
| }; |
| |
| class InstanceValueHolderFactory : public ValueHolderFactory { |
| public: |
| explicit InstanceValueHolderFactory(const T& value) : value_(value) {} |
| ValueHolder* MakeNewHolder() const override { |
| return new ValueHolder(value_); |
| } |
| |
| private: |
| const T value_; // The value for each thread. |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(InstanceValueHolderFactory); |
| }; |
| |
| std::unique_ptr<ValueHolderFactory> default_factory_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadLocal); |
| }; |
| |
| # elif GTEST_HAS_PTHREAD |
| |
| // MutexBase and Mutex implement mutex on pthreads-based platforms. |
| class MutexBase { |
| public: |
| // Acquires this mutex. |
| void Lock() { |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_lock(&mutex_)); |
| owner_ = pthread_self(); |
| has_owner_ = true; |
| } |
| |
| // Releases this mutex. |
| void Unlock() { |
| // Since the lock is being released the owner_ field should no longer be |
| // considered valid. We don't protect writing to has_owner_ here, as it's |
| // the caller's responsibility to ensure that the current thread holds the |
| // mutex when this is called. |
| has_owner_ = false; |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_unlock(&mutex_)); |
| } |
| |
| // Does nothing if the current thread holds the mutex. Otherwise, crashes |
| // with high probability. |
| void AssertHeld() const { |
| GTEST_CHECK_(has_owner_ && pthread_equal(owner_, pthread_self())) |
| << "The current thread is not holding the mutex @" << this; |
| } |
| |
| // A static mutex may be used before main() is entered. It may even |
| // be used before the dynamic initialization stage. Therefore we |
| // must be able to initialize a static mutex object at link time. |
| // This means MutexBase has to be a POD and its member variables |
| // have to be public. |
| public: |
| pthread_mutex_t mutex_; // The underlying pthread mutex. |
| // has_owner_ indicates whether the owner_ field below contains a valid thread |
| // ID and is therefore safe to inspect (e.g., to use in pthread_equal()). All |
| // accesses to the owner_ field should be protected by a check of this field. |
| // An alternative might be to memset() owner_ to all zeros, but there's no |
| // guarantee that a zero'd pthread_t is necessarily invalid or even different |
| // from pthread_self(). |
| bool has_owner_; |
| pthread_t owner_; // The thread holding the mutex. |
| }; |
| |
| // Forward-declares a static mutex. |
| # define GTEST_DECLARE_STATIC_MUTEX_(mutex) \ |
| extern ::testing::internal::MutexBase mutex |
| |
| // Defines and statically (i.e. at link time) initializes a static mutex. |
| // The initialization list here does not explicitly initialize each field, |
| // instead relying on default initialization for the unspecified fields. In |
| // particular, the owner_ field (a pthread_t) is not explicitly initialized. |
| // This allows initialization to work whether pthread_t is a scalar or struct. |
| // The flag -Wmissing-field-initializers must not be specified for this to work. |
| #define GTEST_DEFINE_STATIC_MUTEX_(mutex) \ |
| ::testing::internal::MutexBase mutex = {PTHREAD_MUTEX_INITIALIZER, false, 0} |
| |
| // The Mutex class can only be used for mutexes created at runtime. It |
| // shares its API with MutexBase otherwise. |
| class Mutex : public MutexBase { |
| public: |
| Mutex() { |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_init(&mutex_, nullptr)); |
| has_owner_ = false; |
| } |
| ~Mutex() { |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_destroy(&mutex_)); |
| } |
| |
| private: |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(Mutex); |
| }; |
| |
| // We cannot name this class MutexLock because the ctor declaration would |
| // conflict with a macro named MutexLock, which is defined on some |
| // platforms. That macro is used as a defensive measure to prevent against |
| // inadvertent misuses of MutexLock like "MutexLock(&mu)" rather than |
| // "MutexLock l(&mu)". Hence the typedef trick below. |
| class GTestMutexLock { |
| public: |
| explicit GTestMutexLock(MutexBase* mutex) |
| : mutex_(mutex) { mutex_->Lock(); } |
| |
| ~GTestMutexLock() { mutex_->Unlock(); } |
| |
| private: |
| MutexBase* const mutex_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(GTestMutexLock); |
| }; |
| |
| typedef GTestMutexLock MutexLock; |
| |
| // Helpers for ThreadLocal. |
| |
| // pthread_key_create() requires DeleteThreadLocalValue() to have |
| // C-linkage. Therefore it cannot be templatized to access |
| // ThreadLocal<T>. Hence the need for class |
| // ThreadLocalValueHolderBase. |
| class ThreadLocalValueHolderBase { |
| public: |
| virtual ~ThreadLocalValueHolderBase() {} |
| }; |
| |
| // Called by pthread to delete thread-local data stored by |
| // pthread_setspecific(). |
| extern "C" inline void DeleteThreadLocalValue(void* value_holder) { |
| delete static_cast<ThreadLocalValueHolderBase*>(value_holder); |
| } |
| |
| // Implements thread-local storage on pthreads-based systems. |
| template <typename T> |
| class GTEST_API_ ThreadLocal { |
| public: |
| ThreadLocal() |
| : key_(CreateKey()), default_factory_(new DefaultValueHolderFactory()) {} |
| explicit ThreadLocal(const T& value) |
| : key_(CreateKey()), |
| default_factory_(new InstanceValueHolderFactory(value)) {} |
| |
| ~ThreadLocal() { |
| // Destroys the managed object for the current thread, if any. |
| DeleteThreadLocalValue(pthread_getspecific(key_)); |
| |
| // Releases resources associated with the key. This will *not* |
| // delete managed objects for other threads. |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_key_delete(key_)); |
| } |
| |
| T* pointer() { return GetOrCreateValue(); } |
| const T* pointer() const { return GetOrCreateValue(); } |
| const T& get() const { return *pointer(); } |
| void set(const T& value) { *pointer() = value; } |
| |
| private: |
| // Holds a value of type T. |
| class ValueHolder : public ThreadLocalValueHolderBase { |
| public: |
| ValueHolder() : value_() {} |
| explicit ValueHolder(const T& value) : value_(value) {} |
| |
| T* pointer() { return &value_; } |
| |
| private: |
| T value_; |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolder); |
| }; |
| |
| static pthread_key_t CreateKey() { |
| pthread_key_t key; |
| // When a thread exits, DeleteThreadLocalValue() will be called on |
| // the object managed for that thread. |
| GTEST_CHECK_POSIX_SUCCESS_( |
| pthread_key_create(&key, &DeleteThreadLocalValue)); |
| return key; |
| } |
| |
| T* GetOrCreateValue() const { |
| ThreadLocalValueHolderBase* const holder = |
| static_cast<ThreadLocalValueHolderBase*>(pthread_getspecific(key_)); |
| if (holder != nullptr) { |
| return CheckedDowncastToActualType<ValueHolder>(holder)->pointer(); |
| } |
| |
| ValueHolder* const new_holder = default_factory_->MakeNewHolder(); |
| ThreadLocalValueHolderBase* const holder_base = new_holder; |
| GTEST_CHECK_POSIX_SUCCESS_(pthread_setspecific(key_, holder_base)); |
| return new_holder->pointer(); |
| } |
| |
| class ValueHolderFactory { |
| public: |
| ValueHolderFactory() {} |
| virtual ~ValueHolderFactory() {} |
| virtual ValueHolder* MakeNewHolder() const = 0; |
| |
| private: |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolderFactory); |
| }; |
| |
| class DefaultValueHolderFactory : public ValueHolderFactory { |
| public: |
| DefaultValueHolderFactory() {} |
| ValueHolder* MakeNewHolder() const override { return new ValueHolder(); } |
| |
| private: |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(DefaultValueHolderFactory); |
| }; |
| |
| class InstanceValueHolderFactory : public ValueHolderFactory { |
| public: |
| explicit InstanceValueHolderFactory(const T& value) : value_(value) {} |
| ValueHolder* MakeNewHolder() const override { |
| return new ValueHolder(value_); |
| } |
| |
| private: |
| const T value_; // The value for each thread. |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(InstanceValueHolderFactory); |
| }; |
| |
| // A key pthreads uses for looking up per-thread values. |
| const pthread_key_t key_; |
| std::unique_ptr<ValueHolderFactory> default_factory_; |
| |
| GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadLocal); |
| }; |
| |
| # endif // GTEST_HAS_MUTEX_AND_THREAD_LOCAL_ |
| |
| #else // GTEST_IS_THREADSAFE |
| |
| // A dummy implementation of synchronization primitives (mutex, lock, |
| // and thread-local variable). Necessary for compiling Google Test where |
| // mutex is not supported - using Google Test in multiple threads is not |
| // supported on such platforms. |
| |
| class Mutex { |
| public: |
| Mutex() {} |
| void Lock() {} |
| void Unlock() {} |
| void AssertHeld() const {} |
| }; |
| |
| # define GTEST_DECLARE_STATIC_MUTEX_(mutex) \ |
| extern ::testing::internal::Mutex mutex |
| |
| # define GTEST_DEFINE_STATIC_MUTEX_(mutex) ::testing::internal::Mutex mutex |
| |
| // We cannot name this class MutexLock because the ctor declaration would |
| // conflict with a macro named MutexLock, which is defined on some |
| // platforms. That macro is used as a defensive measure to prevent against |
| // inadvertent misuses of MutexLock like "MutexLock(&mu)" rather than |
| // "MutexLock l(&mu)". Hence the typedef trick below. |
| class GTestMutexLock { |
| public: |
| explicit GTestMutexLock(Mutex*) {} // NOLINT |
| }; |
| |
| typedef GTestMutexLock MutexLock; |
| |
| template <typename T> |
| class GTEST_API_ ThreadLocal { |
| public: |
| ThreadLocal() : value_() {} |
| explicit ThreadLocal(const T& value) : value_(value) {} |
| T* pointer() { return &value_; } |
| const T* pointer() const { return &value_; } |
| const T& get() const { return value_; } |
| void set(const T& value) { value_ = value; } |
| private: |
| T value_; |
| }; |
| |
| #endif // GTEST_IS_THREADSAFE |
| |
| // Returns the number of threads running in the process, or 0 to indicate that |
| // we cannot detect it. |
| GTEST_API_ size_t GetThreadCount(); |
| |
| #if GTEST_OS_WINDOWS |
| # define GTEST_PATH_SEP_ "\\" |
| # define GTEST_HAS_ALT_PATH_SEP_ 1 |
| #else |
| # define GTEST_PATH_SEP_ "/" |
| # define GTEST_HAS_ALT_PATH_SEP_ 0 |
| #endif // GTEST_OS_WINDOWS |
| |
| // Utilities for char. |
| |
| // isspace(int ch) and friends accept an unsigned char or EOF. char |
| // may be signed, depending on the compiler (or compiler flags). |
| // Therefore we need to cast a char to unsigned char before calling |
| // isspace(), etc. |
| |
| inline bool IsAlpha(char ch) { |
| return isalpha(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsAlNum(char ch) { |
| return isalnum(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsDigit(char ch) { |
| return isdigit(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsLower(char ch) { |
| return islower(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsSpace(char ch) { |
| return isspace(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsUpper(char ch) { |
| return isupper(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsXDigit(char ch) { |
| return isxdigit(static_cast<unsigned char>(ch)) != 0; |
| } |
| inline bool IsXDigit(wchar_t ch) { |
| const unsigned char low_byte = static_cast<unsigned char>(ch); |
| return ch == low_byte && isxdigit(low_byte) != 0; |
| } |
| |
| inline char ToLower(char ch) { |
| return static_cast<char>(tolower(static_cast<unsigned char>(ch))); |
| } |
| inline char ToUpper(char ch) { |
| return static_cast<char>(toupper(static_cast<unsigned char>(ch))); |
| } |
| |
| inline std::string StripTrailingSpaces(std::string str) { |
| std::string::iterator it = str.end(); |
| while (it != str.begin() && IsSpace(*--it)) |
| it = str.erase(it); |
| return str; |
| } |
| |
| // The testing::internal::posix namespace holds wrappers for common |
| // POSIX functions. These wrappers hide the differences between |
| // Windows/MSVC and POSIX systems. Since some compilers define these |
| // standard functions as macros, the wrapper cannot have the same name |
| // as the wrapped function. |
| |
| namespace posix { |
| |
| // Functions with a different name on Windows. |
| |
| #if GTEST_OS_WINDOWS |
| |
| typedef struct _stat StatStruct; |
| |
| # ifdef __BORLANDC__ |
| inline int DoIsATTY(int fd) { return isatty(fd); } |
| inline int StrCaseCmp(const char* s1, const char* s2) { |
| return stricmp(s1, s2); |
| } |
| inline char* StrDup(const char* src) { return strdup(src); } |
| # else // !__BORLANDC__ |
| # if GTEST_OS_WINDOWS_MOBILE |
| inline int DoIsATTY(int /* fd */) { return 0; } |
| # else |
| inline int DoIsATTY(int fd) { return _isatty(fd); } |
| # endif // GTEST_OS_WINDOWS_MOBILE |
| inline int StrCaseCmp(const char* s1, const char* s2) { |
| return _stricmp(s1, s2); |
| } |
| inline char* StrDup(const char* src) { return _strdup(src); } |
| # endif // __BORLANDC__ |
| |
| # if GTEST_OS_WINDOWS_MOBILE |
| inline int FileNo(FILE* file) { return reinterpret_cast<int>(_fileno(file)); } |
| // Stat(), RmDir(), and IsDir() are not needed on Windows CE at this |
| // time and thus not defined there. |
| # else |
| inline int FileNo(FILE* file) { return _fileno(file); } |
| inline int Stat(const char* path, StatStruct* buf) { return _stat(path, buf); } |
| inline int RmDir(const char* dir) { return _rmdir(dir); } |
| inline bool IsDir(const StatStruct& st) { |
| return (_S_IFDIR & st.st_mode) != 0; |
| } |
| # endif // GTEST_OS_WINDOWS_MOBILE |
| |
| #elif GTEST_OS_ESP8266 |
| typedef struct stat StatStruct; |
| |
| inline int FileNo(FILE* file) { return fileno(file); } |
| inline int DoIsATTY(int fd) { return isatty(fd); } |
| inline int Stat(const char* path, StatStruct* buf) { |
| // stat function not implemented on ESP8266 |
| return 0; |
| } |
| inline int StrCaseCmp(const char* s1, const char* s2) { |
| return strcasecmp(s1, s2); |
| } |
| inline char* StrDup(const char* src) { return strdup(src); } |
| inline int RmDir(const char* dir) { return rmdir(dir); } |
| inline bool IsDir(const StatStruct& st) { return S_ISDIR(st.st_mode); } |
| |
| #else |
| |
| typedef struct stat StatStruct; |
| |
| inline int FileNo(FILE* file) { return fileno(file); } |
| inline int DoIsATTY(int fd) { return isatty(fd); } |
| inline int Stat(const char* path, StatStruct* buf) { return stat(path, buf); } |
| inline int StrCaseCmp(const char* s1, const char* s2) { |
| return strcasecmp(s1, s2); |
| } |
| inline char* StrDup(const char* src) { return strdup(src); } |
| inline int RmDir(const char* dir) { return rmdir(dir); } |
| inline bool IsDir(const StatStruct& st) { return S_ISDIR(st.st_mode); } |
| |
| #endif // GTEST_OS_WINDOWS |
| |
| inline int IsATTY(int fd) { |
| // DoIsATTY might change errno (for example ENOTTY in case you redirect stdout |
| // to a file on Linux), which is unexpected, so save the previous value, and |
| // restore it after the call. |
| int savedErrno = errno; |
| int isAttyValue = DoIsATTY(fd); |
| errno = savedErrno; |
| |
| return isAttyValue; |
| } |
| |
| // Functions deprecated by MSVC 8.0. |
| |
| GTEST_DISABLE_MSC_DEPRECATED_PUSH_() |
| |
| // ChDir(), FReopen(), FDOpen(), Read(), Write(), Close(), and |
| // StrError() aren't needed on Windows CE at this time and thus not |
| // defined there. |
| |
| #if !GTEST_OS_WINDOWS_MOBILE && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT |
| inline int ChDir(const char* dir) { return chdir(dir); } |
| #endif |
| inline FILE* FOpen(const char* path, const char* mode) { |
| #if GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_MINGW |
| struct wchar_codecvt : public std::codecvt<wchar_t, char, std::mbstate_t> {}; |
| std::wstring_convert<wchar_codecvt> converter; |
| std::wstring wide_path = converter.from_bytes(path); |
| std::wstring wide_mode = converter.from_bytes(mode); |
| return _wfopen(wide_path.c_str(), wide_mode.c_str()); |
| #else // GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_MINGW |
| return fopen(path, mode); |
| #endif // GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_MINGW |
| } |
| #if !GTEST_OS_WINDOWS_MOBILE |
| inline FILE *FReopen(const char* path, const char* mode, FILE* stream) { |
| return freopen(path, mode, stream); |
| } |
| inline FILE* FDOpen(int fd, const char* mode) { return fdopen(fd, mode); } |
| #endif |
| inline int FClose(FILE* fp) { return fclose(fp); } |
| #if !GTEST_OS_WINDOWS_MOBILE |
| inline int Read(int fd, void* buf, unsigned int count) { |
| return static_cast<int>(read(fd, buf, count)); |
| } |
| inline int Write(int fd, const void* buf, unsigned int count) { |
| return static_cast<int>(write(fd, buf, count)); |
| } |
| inline int Close(int fd) { return close(fd); } |
| inline const char* StrError(int errnum) { return strerror(errnum); } |
| #endif |
| inline const char* GetEnv(const char* name) { |
| #if GTEST_OS_WINDOWS_MOBILE || GTEST_OS_WINDOWS_PHONE || \ |
| GTEST_OS_WINDOWS_RT || GTEST_OS_ESP8266 |
| // We are on an embedded platform, which has no environment variables. |
| static_cast<void>(name); // To prevent 'unused argument' warning. |
| return nullptr; |
| #elif defined(__BORLANDC__) || defined(__SunOS_5_8) || defined(__SunOS_5_9) |
| // Environment variables which we programmatically clear will be set to the |
| // empty string rather than unset (NULL). Handle that case. |
| const char* const env = getenv(name); |
| return (env != nullptr && env[0] != '\0') ? env : nullptr; |
| #else |
| return getenv(name); |
| #endif |
| } |
| |
| GTEST_DISABLE_MSC_DEPRECATED_POP_() |
| |
| #if GTEST_OS_WINDOWS_MOBILE |
| // Windows CE has no C library. The abort() function is used in |
| // several places in Google Test. This implementation provides a reasonable |
| // imitation of standard behaviour. |
| [[noreturn]] void Abort(); |
| #else |
| [[noreturn]] inline void Abort() { abort(); } |
| #endif // GTEST_OS_WINDOWS_MOBILE |
| |
| } // namespace posix |
| |
| // MSVC "deprecates" snprintf and issues warnings wherever it is used. In |
| // order to avoid these warnings, we need to use _snprintf or _snprintf_s on |
| // MSVC-based platforms. We map the GTEST_SNPRINTF_ macro to the appropriate |
| // function in order to achieve that. We use macro definition here because |
| // snprintf is a variadic function. |
| #if _MSC_VER && !GTEST_OS_WINDOWS_MOBILE |
| // MSVC 2005 and above support variadic macros. |
| # define GTEST_SNPRINTF_(buffer, size, format, ...) \ |
| _snprintf_s(buffer, size, size, format, __VA_ARGS__) |
| #elif defined(_MSC_VER) |
| // Windows CE does not define _snprintf_s |
| # define GTEST_SNPRINTF_ _snprintf |
| #else |
| # define GTEST_SNPRINTF_ snprintf |
| #endif |
| |
| // The biggest signed integer type the compiler supports. |
| // |
| // long long is guaranteed to be at least 64-bits in C++11. |
| using BiggestInt = long long; // NOLINT |
| |
| // The maximum number a BiggestInt can represent. |
| constexpr BiggestInt kMaxBiggestInt = (std::numeric_limits<BiggestInt>::max)(); |
| |
| // This template class serves as a compile-time function from size to |
| // type. It maps a size in bytes to a primitive type with that |
| // size. e.g. |
| // |
| // TypeWithSize<4>::UInt |
| // |
| // is typedef-ed to be unsigned int (unsigned integer made up of 4 |
| // bytes). |
| // |
| // Such functionality should belong to STL, but I cannot find it |
| // there. |
| // |
| // Google Test uses this class in the implementation of floating-point |
| // comparison. |
| // |
| // For now it only handles UInt (unsigned int) as that's all Google Test |
| // needs. Other types can be easily added in the future if need |
| // arises. |
| template <size_t size> |
| class TypeWithSize { |
| public: |
| // This prevents the user from using TypeWithSize<N> with incorrect |
| // values of N. |
| using UInt = void; |
| }; |
| |
| // The specialization for size 4. |
| template <> |
| class TypeWithSize<4> { |
| public: |
| using Int = std::int32_t; |
| using UInt = std::uint32_t; |
| }; |
| |
| // The specialization for size 8. |
| template <> |
| class TypeWithSize<8> { |
| public: |
| using Int = std::int64_t; |
| using UInt = std::uint64_t; |
| }; |
| |
| // Integer types of known sizes. |
| using TimeInMillis = int64_t; // Represents time in milliseconds. |
| |
| // Utilities for command line flags and environment variables. |
| |
| // Macro for referencing flags. |
| #if !defined(GTEST_FLAG) |
| # define GTEST_FLAG(name) FLAGS_gtest_##name |
| #endif // !defined(GTEST_FLAG) |
| |
| #if !defined(GTEST_USE_OWN_FLAGFILE_FLAG_) |
| # define GTEST_USE_OWN_FLAGFILE_FLAG_ 1 |
| #endif // !defined(GTEST_USE_OWN_FLAGFILE_FLAG_) |
| |
| #if !defined(GTEST_DECLARE_bool_) |
| # define GTEST_FLAG_SAVER_ ::testing::internal::GTestFlagSaver |
| |
| // Macros for declaring flags. |
| # define GTEST_DECLARE_bool_(name) GTEST_API_ extern bool GTEST_FLAG(name) |
| # define GTEST_DECLARE_int32_(name) \ |
| GTEST_API_ extern std::int32_t GTEST_FLAG(name) |
| # define GTEST_DECLARE_string_(name) \ |
| GTEST_API_ extern ::std::string GTEST_FLAG(name) |
| |
| // Macros for defining flags. |
| # define GTEST_DEFINE_bool_(name, default_val, doc) \ |
| GTEST_API_ bool GTEST_FLAG(name) = (default_val) |
| # define GTEST_DEFINE_int32_(name, default_val, doc) \ |
| GTEST_API_ std::int32_t GTEST_FLAG(name) = (default_val) |
| # define GTEST_DEFINE_string_(name, default_val, doc) \ |
| GTEST_API_ ::std::string GTEST_FLAG(name) = (default_val) |
| |
| #endif // !defined(GTEST_DECLARE_bool_) |
| |
| // Thread annotations |
| #if !defined(GTEST_EXCLUSIVE_LOCK_REQUIRED_) |
| # define GTEST_EXCLUSIVE_LOCK_REQUIRED_(locks) |
| # define GTEST_LOCK_EXCLUDED_(locks) |
| #endif // !defined(GTEST_EXCLUSIVE_LOCK_REQUIRED_) |
| |
| // Parses 'str' for a 32-bit signed integer. If successful, writes the result |
| // to *value and returns true; otherwise leaves *value unchanged and returns |
| // false. |
| GTEST_API_ bool ParseInt32(const Message& src_text, const char* str, |
| int32_t* value); |
| |
| // Parses a bool/int32_t/string from the environment variable |
| // corresponding to the given Google Test flag. |
| bool BoolFromGTestEnv(const char* flag, bool default_val); |
| GTEST_API_ int32_t Int32FromGTestEnv(const char* flag, int32_t default_val); |
| std::string OutputFlagAlsoCheckEnvVar(); |
| const char* StringFromGTestEnv(const char* flag, const char* default_val); |
| |
| } // namespace internal |
| } // namespace testing |
| |
| #if !defined(GTEST_INTERNAL_DEPRECATED) |
| |
| // Internal Macro to mark an API deprecated, for googletest usage only |
| // Usage: class GTEST_INTERNAL_DEPRECATED(message) MyClass or |
| // GTEST_INTERNAL_DEPRECATED(message) <return_type> myFunction(); Every usage of |
| // a deprecated entity will trigger a warning when compiled with |
| // `-Wdeprecated-declarations` option (clang, gcc, any __GNUC__ compiler). |
| // For msvc /W3 option will need to be used |
| // Note that for 'other' compilers this macro evaluates to nothing to prevent |
| // compilations errors. |
| #if defined(_MSC_VER) |
| #define GTEST_INTERNAL_DEPRECATED(message) __declspec(deprecated(message)) |
| #elif defined(__GNUC__) |
| #define GTEST_INTERNAL_DEPRECATED(message) __attribute__((deprecated(message))) |
| #else |
| #define GTEST_INTERNAL_DEPRECATED(message) |
| #endif |
| |
| #endif // !defined(GTEST_INTERNAL_DEPRECATED) |
| |
| #if GTEST_HAS_ABSL |
| // Always use absl::any for UniversalPrinter<> specializations if googletest |
| // is built with absl support. |
| #define GTEST_INTERNAL_HAS_ANY 1 |
| #include "absl/types/any.h" |
| namespace testing { |
| namespace internal { |
| using Any = ::absl::any; |
| } // namespace internal |
| } // namespace testing |
| #else |
| #ifdef __has_include |
| #if __has_include(<any>) && __cplusplus >= 201703L |
| // Otherwise for C++17 and higher use std::any for UniversalPrinter<> |
| // specializations. |
| #define GTEST_INTERNAL_HAS_ANY 1 |
| #include <any> |
| namespace testing { |
| namespace internal { |
| using Any = ::std::any; |
| } // namespace internal |
| } // namespace testing |
| // The case where absl is configured NOT to alias std::any is not |
| // supported. |
| #endif // __has_include(<any>) && __cplusplus >= 201703L |
| #endif // __has_include |
| #endif // GTEST_HAS_ABSL |
| |
| #if GTEST_HAS_ABSL |
| // Always use absl::optional for UniversalPrinter<> specializations if |
| // googletest is built with absl support. |
| #define GTEST_INTERNAL_HAS_OPTIONAL 1 |
| #include "absl/types/optional.h" |
| namespace testing { |
| namespace internal { |
| template <typename T> |
| using Optional = ::absl::optional<T>; |
| } // namespace internal |
| } // namespace testing |
| #else |
| #ifdef __has_include |
| #if __has_include(<optional>) && __cplusplus >= 201703L |
| // Otherwise for C++17 and higher use std::optional for UniversalPrinter<> |
| // specializations. |
| #define GTEST_INTERNAL_HAS_OPTIONAL 1 |
| #include <optional> |
| namespace testing { |
| namespace internal { |
| template <typename T> |
| using Optional = ::std::optional<T>; |
| } // namespace internal |
| } // namespace testing |
| // The case where absl is configured NOT to alias std::optional is not |
| // supported. |
| #endif // __has_include(<optional>) && __cplusplus >= 201703L |
| #endif // __has_include |
| #endif // GTEST_HAS_ABSL |
| |
| #if GTEST_HAS_ABSL |
| // Always use absl::string_view for Matcher<> specializations if googletest |
| // is built with absl support. |
| # define GTEST_INTERNAL_HAS_STRING_VIEW 1 |
| #include "absl/strings/string_view.h" |
| namespace testing { |
| namespace internal { |
| using StringView = ::absl::string_view; |
| } // namespace internal |
| } // namespace testing |
| #else |
| # ifdef __has_include |
| # if __has_include(<string_view>) && __cplusplus >= 201703L |
| // Otherwise for C++17 and higher use std::string_view for Matcher<> |
| // specializations. |
| # define GTEST_INTERNAL_HAS_STRING_VIEW 1 |
| #include <string_view> |
| namespace testing { |
| namespace internal { |
| using StringView = ::std::string_view; |
| } // namespace internal |
| } // namespace testing |
| // The case where absl is configured NOT to alias std::string_view is not |
| // supported. |
| # endif // __has_include(<string_view>) && __cplusplus >= 201703L |
| # endif // __has_include |
| #endif // GTEST_HAS_ABSL |
| |
| #if GTEST_HAS_ABSL |
| // Always use absl::variant for UniversalPrinter<> specializations if googletest |
| // is built with absl support. |
| #define GTEST_INTERNAL_HAS_VARIANT 1 |
| #include "absl/types/variant.h" |
| namespace testing { |
| namespace internal { |
| template <typename... T> |
| using Variant = ::absl::variant<T...>; |
| } // namespace internal |
| } // namespace testing |
| #else |
| #ifdef __has_include |
| #if __has_include(<variant>) && __cplusplus >= 201703L |
| // Otherwise for C++17 and higher use std::variant for UniversalPrinter<> |
| // specializations. |
| #define GTEST_INTERNAL_HAS_VARIANT 1 |
| #include <variant> |
| namespace testing { |
| namespace internal { |
| template <typename... T> |
| using Variant = ::std::variant<T...>; |
| } // namespace internal |
| } // namespace testing |
| // The case where absl is configured NOT to alias std::variant is not supported. |
| #endif // __has_include(<variant>) && __cplusplus >= 201703L |
| #endif // __has_include |
| #endif // GTEST_HAS_ABSL |
| |
| #endif // GTEST_INCLUDE_GTEST_INTERNAL_GTEST_PORT_H_ |