blob: 59e206771c1e5862ae818b64bf3b3a805d94690a [file] [log] [blame]
/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
* project 1999-2004.
*/
/* ====================================================================
* Copyright (c) 1999 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* licensing@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com). */
#include <openssl/pkcs8.h>
#include <limits.h>
#include <string.h>
#include <openssl/bytestring.h>
#include <openssl/cipher.h>
#include <openssl/err.h>
#include <openssl/mem.h>
#include <openssl/obj.h>
#include <openssl/rand.h>
#include "internal.h"
#include "../internal.h"
static int pkcs5_pbe2_cipher_init(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
unsigned iterations, const uint8_t *pass_raw,
size_t pass_raw_len, const uint8_t *salt,
size_t salt_len, const uint8_t *iv,
size_t iv_len, int enc) {
if (iv_len != EVP_CIPHER_iv_length(cipher)) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_ERROR_SETTING_CIPHER_PARAMS);
return 0;
}
uint8_t key[EVP_MAX_KEY_LENGTH];
int ret = PKCS5_PBKDF2_HMAC_SHA1((const char *)pass_raw, pass_raw_len, salt,
salt_len, iterations,
EVP_CIPHER_key_length(cipher), key) &&
EVP_CipherInit_ex(ctx, cipher, NULL /* engine */, key, iv, enc);
OPENSSL_cleanse(key, EVP_MAX_KEY_LENGTH);
return ret;
}
int PKCS5_pbe2_encrypt_init(CBB *out, EVP_CIPHER_CTX *ctx,
const EVP_CIPHER *cipher, unsigned iterations,
const uint8_t *pass_raw, size_t pass_raw_len,
const uint8_t *salt, size_t salt_len) {
int cipher_nid = EVP_CIPHER_nid(cipher);
if (cipher_nid == NID_undef) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER);
return 0;
}
/* Generate a random IV. */
uint8_t iv[EVP_MAX_IV_LENGTH];
if (!RAND_bytes(iv, EVP_CIPHER_iv_length(cipher))) {
return 0;
}
/* See RFC 2898, appendix A. */
CBB algorithm, param, kdf, kdf_param, salt_cbb, cipher_cbb, iv_cbb;
if (!CBB_add_asn1(out, &algorithm, CBS_ASN1_SEQUENCE) ||
!OBJ_nid2cbb(&algorithm, NID_pbes2) ||
!CBB_add_asn1(&algorithm, &param, CBS_ASN1_SEQUENCE) ||
!CBB_add_asn1(&param, &kdf, CBS_ASN1_SEQUENCE) ||
!OBJ_nid2cbb(&kdf, NID_id_pbkdf2) ||
!CBB_add_asn1(&kdf, &kdf_param, CBS_ASN1_SEQUENCE) ||
!CBB_add_asn1(&kdf_param, &salt_cbb, CBS_ASN1_OCTETSTRING) ||
!CBB_add_bytes(&salt_cbb, salt, salt_len) ||
!CBB_add_asn1_uint64(&kdf_param, iterations) ||
/* Specify a key length for RC2. */
(cipher_nid == NID_rc2_cbc &&
!CBB_add_asn1_uint64(&kdf_param, EVP_CIPHER_key_length(cipher))) ||
/* Omit the PRF. We use the default hmacWithSHA1. */
!CBB_add_asn1(&param, &cipher_cbb, CBS_ASN1_SEQUENCE) ||
!OBJ_nid2cbb(&cipher_cbb, cipher_nid) ||
/* RFC 2898 says RC2-CBC and RC5-CBC-Pad use a SEQUENCE with version and
* IV, but OpenSSL always uses an OCTET STRING IV, so we do the same. */
!CBB_add_asn1(&cipher_cbb, &iv_cbb, CBS_ASN1_OCTETSTRING) ||
!CBB_add_bytes(&iv_cbb, iv, EVP_CIPHER_iv_length(cipher)) ||
!CBB_flush(out)) {
return 0;
}
return pkcs5_pbe2_cipher_init(ctx, cipher, iterations, pass_raw, pass_raw_len,
salt, salt_len, iv,
EVP_CIPHER_iv_length(cipher), 1 /* encrypt */);
}
int PKCS5_pbe2_decrypt_init(const struct pbe_suite *suite, EVP_CIPHER_CTX *ctx,
const uint8_t *pass_raw, size_t pass_raw_len,
CBS *param) {
CBS pbe_param, kdf, kdf_obj, enc_scheme, enc_obj;
if (!CBS_get_asn1(param, &pbe_param, CBS_ASN1_SEQUENCE) ||
CBS_len(param) != 0 ||
!CBS_get_asn1(&pbe_param, &kdf, CBS_ASN1_SEQUENCE) ||
!CBS_get_asn1(&pbe_param, &enc_scheme, CBS_ASN1_SEQUENCE) ||
CBS_len(&pbe_param) != 0 ||
!CBS_get_asn1(&kdf, &kdf_obj, CBS_ASN1_OBJECT) ||
!CBS_get_asn1(&enc_scheme, &enc_obj, CBS_ASN1_OBJECT)) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_DECODE_ERROR);
return 0;
}
/* Check that the key derivation function is PBKDF2. */
if (OBJ_cbs2nid(&kdf_obj) != NID_id_pbkdf2) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_UNSUPPORTED_KEY_DERIVATION_FUNCTION);
return 0;
}
/* See if we recognise the encryption algorithm. */
const EVP_CIPHER *cipher = EVP_get_cipherbynid(OBJ_cbs2nid(&enc_obj));
if (cipher == NULL) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_UNSUPPORTED_CIPHER);
return 0;
}
/* Parse the KDF parameters. */
CBS pbkdf2_params, salt;
uint64_t iterations;
if (!CBS_get_asn1(&kdf, &pbkdf2_params, CBS_ASN1_SEQUENCE) ||
CBS_len(&kdf) != 0 ||
!CBS_get_asn1(&pbkdf2_params, &salt, CBS_ASN1_OCTETSTRING) ||
!CBS_get_asn1_uint64(&pbkdf2_params, &iterations)) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_DECODE_ERROR);
return 0;
}
if (iterations == 0 || iterations > UINT_MAX) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_BAD_ITERATION_COUNT);
return 0;
}
/* The optional keyLength parameter, if present, must match the key length of
* the cipher. */
if (CBS_peek_asn1_tag(&pbkdf2_params, CBS_ASN1_INTEGER)) {
uint64_t key_len;
if (!CBS_get_asn1_uint64(&pbkdf2_params, &key_len)) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_DECODE_ERROR);
return 0;
}
if (key_len != EVP_CIPHER_key_length(cipher)) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_UNSUPPORTED_KEYLENGTH);
return 0;
}
}
if (CBS_len(&pbkdf2_params) != 0) {
CBS prf;
if (!CBS_get_asn1(&pbkdf2_params, &prf, CBS_ASN1_OBJECT) ||
CBS_len(&pbkdf2_params) != 0) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_DECODE_ERROR);
return 0;
}
/* We only support hmacWithSHA1. It is the DEFAULT, so DER requires it be
* omitted, but we match OpenSSL in tolerating it being present. */
if (OBJ_cbs2nid(&prf) != NID_hmacWithSHA1) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_UNSUPPORTED_PRF);
return 0;
}
}
/* Parse the encryption scheme parameters. Note OpenSSL does not match the
* specification. Per RFC 2898, this should depend on the encryption scheme.
* In particular, RC2-CBC and RC5-CBC-Pad use a SEQUENCE with version and IV.
* We align with OpenSSL. */
CBS iv;
if (!CBS_get_asn1(&enc_scheme, &iv, CBS_ASN1_OCTETSTRING) ||
CBS_len(&enc_scheme) != 0) {
OPENSSL_PUT_ERROR(PKCS8, PKCS8_R_UNSUPPORTED_PRF);
return 0;
}
return pkcs5_pbe2_cipher_init(ctx, cipher, (unsigned)iterations, pass_raw,
pass_raw_len, CBS_data(&salt), CBS_len(&salt),
CBS_data(&iv), CBS_len(&iv), 0 /* decrypt */);
}