blob: f2e0c4cbc9c74182912c09fd2192e0787d7fcd39 [file] [log] [blame]
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.] */
#if !defined(__STDC_FORMAT_MACROS)
#define __STDC_FORMAT_MACROS
#endif
#include <openssl/cpu.h>
#if !defined(OPENSSL_NO_ASM) && (defined(OPENSSL_X86) || defined(OPENSSL_X86_64))
#include <inttypes.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#if defined(OPENSSL_WINDOWS)
OPENSSL_MSVC_PRAGMA(warning(push, 3))
#include <immintrin.h>
#include <intrin.h>
OPENSSL_MSVC_PRAGMA(warning(pop))
#endif
#include "internal.h"
/* OPENSSL_cpuid runs the cpuid instruction. |leaf| is passed in as EAX and ECX
* is set to zero. It writes EAX, EBX, ECX, and EDX to |*out_eax| through
* |*out_edx|. */
static void OPENSSL_cpuid(uint32_t *out_eax, uint32_t *out_ebx,
uint32_t *out_ecx, uint32_t *out_edx, uint32_t leaf) {
#if defined(OPENSSL_WINDOWS)
int tmp[4];
__cpuid(tmp, (int)leaf);
*out_eax = (uint32_t)tmp[0];
*out_ebx = (uint32_t)tmp[1];
*out_ecx = (uint32_t)tmp[2];
*out_edx = (uint32_t)tmp[3];
#elif defined(__pic__) && defined(OPENSSL_32_BIT)
/* Inline assembly may not clobber the PIC register. For 32-bit, this is EBX.
* See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=47602. */
__asm__ volatile (
"xor %%ecx, %%ecx\n"
"mov %%ebx, %%edi\n"
"cpuid\n"
"xchg %%edi, %%ebx\n"
: "=a"(*out_eax), "=D"(*out_ebx), "=c"(*out_ecx), "=d"(*out_edx)
: "a"(leaf)
);
#else
__asm__ volatile (
"xor %%ecx, %%ecx\n"
"cpuid\n"
: "=a"(*out_eax), "=b"(*out_ebx), "=c"(*out_ecx), "=d"(*out_edx)
: "a"(leaf)
);
#endif
}
/* OPENSSL_xgetbv returns the value of an Intel Extended Control Register (XCR).
* Currently only XCR0 is defined by Intel so |xcr| should always be zero. */
static uint64_t OPENSSL_xgetbv(uint32_t xcr) {
#if defined(OPENSSL_WINDOWS)
return (uint64_t)_xgetbv(xcr);
#else
uint32_t eax, edx;
__asm__ volatile ("xgetbv" : "=a"(eax), "=d"(edx) : "c"(xcr));
return (((uint64_t)edx) << 32) | eax;
#endif
}
/* handle_cpu_env applies the value from |in| to the CPUID values in |out[0]|
* and |out[1]|. See the comment in |OPENSSL_cpuid_setup| about this. */
static void handle_cpu_env(uint32_t *out, const char *in) {
const int invert = in[0] == '~';
uint64_t v;
if (!sscanf(in + invert, "%" PRIu64, &v)) {
return;
}
if (invert) {
out[0] &= ~v;
out[1] &= ~(v >> 32);
} else {
out[0] = v;
out[1] = v >> 32;
}
}
void OPENSSL_cpuid_setup(void) {
/* Determine the vendor and maximum input value. */
uint32_t eax, ebx, ecx, edx;
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0);
uint32_t num_ids = eax;
int is_intel = ebx == 0x756e6547 /* Genu */ &&
edx == 0x49656e69 /* ineI */ &&
ecx == 0x6c65746e /* ntel */;
int is_amd = ebx == 0x68747541 /* Auth */ &&
edx == 0x69746e65 /* enti */ &&
ecx == 0x444d4163 /* cAMD */;
int has_amd_xop = 0;
if (is_amd) {
/* AMD-specific logic.
* See http://developer.amd.com/wordpress/media/2012/10/254811.pdf */
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0x80000000);
uint32_t num_extended_ids = eax;
if (num_extended_ids >= 0x80000001) {
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0x80000001);
if (ecx & (1 << 11)) {
has_amd_xop = 1;
}
}
}
uint32_t extended_features = 0;
if (num_ids >= 7) {
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 7);
extended_features = ebx;
}
/* Determine the number of cores sharing an L1 data cache to adjust the
* hyper-threading bit. */
uint32_t cores_per_cache = 0;
if (is_amd) {
/* AMD CPUs never share an L1 data cache between threads but do set the HTT
* bit on multi-core CPUs. */
cores_per_cache = 1;
} else if (num_ids >= 4) {
/* TODO(davidben): The Intel manual says this CPUID leaf enumerates all
* caches using ECX and doesn't say which is first. Does this matter? */
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 4);
cores_per_cache = 1 + ((eax >> 14) & 0xfff);
}
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 1);
/* Adjust the hyper-threading bit. */
if (edx & (1 << 28)) {
uint32_t num_logical_cores = (ebx >> 16) & 0xff;
if (cores_per_cache == 1 || num_logical_cores <= 1) {
edx &= ~(1 << 28);
}
}
/* Reserved bit #20 was historically repurposed to control the in-memory
* representation of RC4 state. Always set it to zero. */
edx &= ~(1 << 20);
/* Reserved bit #30 is repurposed to signal an Intel CPU. */
if (is_intel) {
edx |= (1 << 30);
} else {
edx &= ~(1 << 30);
}
/* The SDBG bit is repurposed to denote AMD XOP support. */
if (has_amd_xop) {
ecx |= (1 << 11);
} else {
ecx &= ~(1 << 11);
}
uint64_t xcr0 = 0;
if (ecx & (1 << 27)) {
/* XCR0 may only be queried if the OSXSAVE bit is set. */
xcr0 = OPENSSL_xgetbv(0);
}
/* See Intel manual, section 14.3. */
if ((xcr0 & 6) != 6) {
/* YMM registers cannot be used. */
ecx &= ~(1 << 28); /* AVX */
ecx &= ~(1 << 12); /* FMA */
ecx &= ~(1 << 11); /* AMD XOP */
extended_features &= ~(1 << 5); /* AVX2 */
}
OPENSSL_ia32cap_P[0] = edx;
OPENSSL_ia32cap_P[1] = ecx;
OPENSSL_ia32cap_P[2] = extended_features;
OPENSSL_ia32cap_P[3] = 0;
const char *env1, *env2;
env1 = getenv("OPENSSL_ia32cap");
if (env1 == NULL) {
return;
}
/* OPENSSL_ia32cap can contain zero, one or two values, separated with a ':'.
* Each value is a 64-bit, unsigned value which may start with "0x" to
* indicate a hex value. Prior to the 64-bit value, a '~' may be given.
*
* If '~' isn't present, then the value is taken as the result of the CPUID.
* Otherwise the value is inverted and ANDed with the probed CPUID result.
*
* The first value determines OPENSSL_ia32cap_P[0] and [1]. The second [2]
* and [3]. */
handle_cpu_env(&OPENSSL_ia32cap_P[0], env1);
env2 = strchr(env1, ':');
if (env2 != NULL) {
handle_cpu_env(&OPENSSL_ia32cap_P[2], env2 + 1);
}
}
#endif /* !OPENSSL_NO_ASM && (OPENSSL_X86 || OPENSSL_X86_64) */