blob: c9facb6994ec20e11040ad3033027cd29b3b5f4c [file] [log] [blame]
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
* ECC cipher suite support in OpenSSL originally developed by
* SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
*/
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
* The portions of the attached software ("Contribution") is developed by
* Nokia Corporation and is licensed pursuant to the OpenSSL open source
* license.
*
* The Contribution, originally written by Mika Kousa and Pasi Eronen of
* Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
* support (see RFC 4279) to OpenSSL.
*
* No patent licenses or other rights except those expressly stated in
* the OpenSSL open source license shall be deemed granted or received
* expressly, by implication, estoppel, or otherwise.
*
* No assurances are provided by Nokia that the Contribution does not
* infringe the patent or other intellectual property rights of any third
* party or that the license provides you with all the necessary rights
* to make use of the Contribution.
*
* THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
* ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
* SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
* OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
* OTHERWISE.
*/
#ifndef OPENSSL_HEADER_SSL_INTERNAL_H
#define OPENSSL_HEADER_SSL_INTERNAL_H
#include <openssl/base.h>
#include <stdlib.h>
#include <initializer_list>
#include <limits>
#include <new>
#include <type_traits>
#include <utility>
#include <openssl/aead.h>
#include <openssl/curve25519.h>
#include <openssl/err.h>
#include <openssl/hpke.h>
#include <openssl/lhash.h>
#include <openssl/mem.h>
#include <openssl/span.h>
#include <openssl/ssl.h>
#include <openssl/stack.h>
#include "../crypto/err/internal.h"
#include "../crypto/internal.h"
#include "../crypto/lhash/internal.h"
#if defined(OPENSSL_WINDOWS)
// Windows defines struct timeval in winsock2.h.
OPENSSL_MSVC_PRAGMA(warning(push, 3))
#include <winsock2.h>
OPENSSL_MSVC_PRAGMA(warning(pop))
#else
#include <sys/time.h>
#endif
BSSL_NAMESPACE_BEGIN
struct SSL_CONFIG;
struct SSL_HANDSHAKE;
struct SSL_PROTOCOL_METHOD;
struct SSL_X509_METHOD;
// C++ utilities.
// New behaves like |new| but uses |OPENSSL_malloc| for memory allocation. It
// returns nullptr on allocation error. It only implements single-object
// allocation and not new T[n].
//
// Note: unlike |new|, this does not support non-public constructors.
template <typename T, typename... Args>
T *New(Args &&... args) {
void *t = OPENSSL_malloc(sizeof(T));
if (t == nullptr) {
return nullptr;
}
return new (t) T(std::forward<Args>(args)...);
}
// Delete behaves like |delete| but uses |OPENSSL_free| to release memory.
//
// Note: unlike |delete| this does not support non-public destructors.
template <typename T>
void Delete(T *t) {
if (t != nullptr) {
t->~T();
OPENSSL_free(t);
}
}
// All types with kAllowUniquePtr set may be used with UniquePtr. Other types
// may be C structs which require a |BORINGSSL_MAKE_DELETER| registration.
namespace internal {
template <typename T>
struct DeleterImpl<T, std::enable_if_t<T::kAllowUniquePtr>> {
static void Free(T *t) { Delete(t); }
};
} // namespace internal
// MakeUnique behaves like |std::make_unique| but returns nullptr on allocation
// error.
template <typename T, typename... Args>
UniquePtr<T> MakeUnique(Args &&... args) {
return UniquePtr<T>(New<T>(std::forward<Args>(args)...));
}
#if defined(BORINGSSL_ALLOW_CXX_RUNTIME)
#define HAS_VIRTUAL_DESTRUCTOR
#define PURE_VIRTUAL = 0
#else
// HAS_VIRTUAL_DESTRUCTOR should be declared in any base class which defines a
// virtual destructor. This avoids a dependency on |_ZdlPv| and prevents the
// class from being used with |delete|.
#define HAS_VIRTUAL_DESTRUCTOR \
void operator delete(void *) { abort(); }
// PURE_VIRTUAL should be used instead of = 0 when defining pure-virtual
// functions. This avoids a dependency on |__cxa_pure_virtual| but loses
// compile-time checking.
#define PURE_VIRTUAL \
{ abort(); }
#endif
// Array<T> is an owning array of elements of |T|.
template <typename T>
class Array {
public:
// Array's default constructor creates an empty array.
Array() {}
Array(const Array &) = delete;
Array(Array &&other) { *this = std::move(other); }
~Array() { Reset(); }
Array &operator=(const Array &) = delete;
Array &operator=(Array &&other) {
Reset();
other.Release(&data_, &size_);
return *this;
}
const T *data() const { return data_; }
T *data() { return data_; }
size_t size() const { return size_; }
bool empty() const { return size_ == 0; }
const T &operator[](size_t i) const { return data_[i]; }
T &operator[](size_t i) { return data_[i]; }
T *begin() { return data_; }
const T *begin() const { return data_; }
T *end() { return data_ + size_; }
const T *end() const { return data_ + size_; }
void Reset() { Reset(nullptr, 0); }
// Reset releases the current contents of the array and takes ownership of the
// raw pointer supplied by the caller.
void Reset(T *new_data, size_t new_size) {
for (size_t i = 0; i < size_; i++) {
data_[i].~T();
}
OPENSSL_free(data_);
data_ = new_data;
size_ = new_size;
}
// Release releases ownership of the array to a raw pointer supplied by the
// caller.
void Release(T **out, size_t *out_size) {
*out = data_;
*out_size = size_;
data_ = nullptr;
size_ = 0;
}
// Init replaces the array with a newly-allocated array of |new_size|
// default-constructed copies of |T|. It returns true on success and false on
// error.
//
// Note that if |T| is a primitive type like |uint8_t|, it is uninitialized.
bool Init(size_t new_size) {
Reset();
if (new_size == 0) {
return true;
}
if (new_size > std::numeric_limits<size_t>::max() / sizeof(T)) {
OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW);
return false;
}
data_ = reinterpret_cast<T *>(OPENSSL_malloc(new_size * sizeof(T)));
if (data_ == nullptr) {
return false;
}
size_ = new_size;
for (size_t i = 0; i < size_; i++) {
new (&data_[i]) T;
}
return true;
}
// CopyFrom replaces the array with a newly-allocated copy of |in|. It returns
// true on success and false on error.
bool CopyFrom(Span<const T> in) {
if (!Init(in.size())) {
return false;
}
OPENSSL_memcpy(data_, in.data(), sizeof(T) * in.size());
return true;
}
// Shrink shrinks the stored size of the array to |new_size|. It crashes if
// the new size is larger. Note this does not shrink the allocation itself.
void Shrink(size_t new_size) {
if (new_size > size_) {
abort();
}
for (size_t i = new_size; i < size_; i++) {
data_[i].~T();
}
size_ = new_size;
}
private:
T *data_ = nullptr;
size_t size_ = 0;
};
// GrowableArray<T> is an array that owns elements of |T|, backed by an
// Array<T>. When necessary, pushing will automatically trigger a resize.
//
// Note, for simplicity, this class currently differs from |std::vector| in that
// |T| must be efficiently default-constructible. Allocated elements beyond the
// end of the array are constructed and destructed.
template <typename T>
class GrowableArray {
public:
GrowableArray() = default;
GrowableArray(const GrowableArray &) = delete;
GrowableArray(GrowableArray &&other) { *this = std::move(other); }
~GrowableArray() {}
GrowableArray &operator=(const GrowableArray &) = delete;
GrowableArray &operator=(GrowableArray &&other) {
size_ = other.size_;
other.size_ = 0;
array_ = std::move(other.array_);
return *this;
}
const T *data() const { return array_.data(); }
T *data() { return array_.data(); }
size_t size() const { return size_; }
bool empty() const { return size_ == 0; }
const T &operator[](size_t i) const { return array_[i]; }
T &operator[](size_t i) { return array_[i]; }
T *begin() { return array_.data(); }
const T *begin() const { return array_.data(); }
T *end() { return array_.data() + size_; }
const T *end() const { return array_.data() + size_; }
void clear() {
size_ = 0;
array_.Reset();
}
// Push adds |elem| at the end of the internal array, growing if necessary. It
// returns false when allocation fails.
bool Push(T elem) {
if (!MaybeGrow()) {
return false;
}
array_[size_] = std::move(elem);
size_++;
return true;
}
// CopyFrom replaces the contents of the array with a copy of |in|. It returns
// true on success and false on allocation error.
bool CopyFrom(Span<const T> in) {
if (!array_.CopyFrom(in)) {
return false;
}
size_ = in.size();
return true;
}
private:
// If there is no room for one more element, creates a new backing array with
// double the size of the old one and copies elements over.
bool MaybeGrow() {
if (array_.size() == 0) {
return array_.Init(kDefaultSize);
}
// No need to grow if we have room for one more T.
if (size_ < array_.size()) {
return true;
}
// Double the array's size if it's safe to do so.
if (array_.size() > std::numeric_limits<size_t>::max() / 2) {
OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW);
return false;
}
Array<T> new_array;
if (!new_array.Init(array_.size() * 2)) {
return false;
}
for (size_t i = 0; i < array_.size(); i++) {
new_array[i] = std::move(array_[i]);
}
array_ = std::move(new_array);
return true;
}
// |size_| is the number of elements stored in this GrowableArray.
size_t size_ = 0;
// |array_| is the backing array. Note that |array_.size()| is this
// GrowableArray's current capacity and that |size_ <= array_.size()|.
Array<T> array_;
// |kDefaultSize| is the default initial size of the backing array.
static constexpr size_t kDefaultSize = 16;
};
// CBBFinishArray behaves like |CBB_finish| but stores the result in an Array.
OPENSSL_EXPORT bool CBBFinishArray(CBB *cbb, Array<uint8_t> *out);
// GetAllNames helps to implement |*_get_all_*_names| style functions. It
// writes at most |max_out| string pointers to |out| and returns the number that
// it would have liked to have written. The strings written consist of
// |fixed_names_len| strings from |fixed_names| followed by |objects_len|
// strings taken by projecting |objects| through |name|.
template <typename T, typename Name>
inline size_t GetAllNames(const char **out, size_t max_out,
Span<const char *const> fixed_names, Name(T::*name),
Span<const T> objects) {
auto span = bssl::MakeSpan(out, max_out);
for (size_t i = 0; !span.empty() && i < fixed_names.size(); i++) {
span[0] = fixed_names[i];
span = span.subspan(1);
}
span = span.subspan(0, objects.size());
for (size_t i = 0; i < span.size(); i++) {
span[i] = objects[i].*name;
}
return fixed_names.size() + objects.size();
}
// Protocol versions.
//
// Due to DTLS's historical wire version differences, we maintain two notions of
// version.
//
// The "version" or "wire version" is the actual 16-bit value that appears on
// the wire. It uniquely identifies a version and is also used at API
// boundaries. The set of supported versions differs between TLS and DTLS. Wire
// versions are opaque values and may not be compared numerically.
//
// The "protocol version" identifies the high-level handshake variant being
// used. DTLS versions map to the corresponding TLS versions. Protocol versions
// are sequential and may be compared numerically.
// ssl_protocol_version_from_wire sets |*out| to the protocol version
// corresponding to wire version |version| and returns true. If |version| is not
// a valid TLS or DTLS version, it returns false.
//
// Note this simultaneously handles both DTLS and TLS. Use one of the
// higher-level functions below for most operations.
bool ssl_protocol_version_from_wire(uint16_t *out, uint16_t version);
// ssl_get_version_range sets |*out_min_version| and |*out_max_version| to the
// minimum and maximum enabled protocol versions, respectively.
bool ssl_get_version_range(const SSL_HANDSHAKE *hs, uint16_t *out_min_version,
uint16_t *out_max_version);
// ssl_supports_version returns whether |hs| supports |version|.
bool ssl_supports_version(const SSL_HANDSHAKE *hs, uint16_t version);
// ssl_method_supports_version returns whether |method| supports |version|.
bool ssl_method_supports_version(const SSL_PROTOCOL_METHOD *method,
uint16_t version);
// ssl_add_supported_versions writes the supported versions of |hs| to |cbb|, in
// decreasing preference order. The version list is filtered to those whose
// protocol version is at least |extra_min_version|.
bool ssl_add_supported_versions(const SSL_HANDSHAKE *hs, CBB *cbb,
uint16_t extra_min_version);
// ssl_negotiate_version negotiates a common version based on |hs|'s preferences
// and the peer preference list in |peer_versions|. On success, it returns true
// and sets |*out_version| to the selected version. Otherwise, it returns false
// and sets |*out_alert| to an alert to send.
bool ssl_negotiate_version(SSL_HANDSHAKE *hs, uint8_t *out_alert,
uint16_t *out_version, const CBS *peer_versions);
// ssl_protocol_version returns |ssl|'s protocol version. It is an error to
// call this function before the version is determined.
uint16_t ssl_protocol_version(const SSL *ssl);
// Cipher suites.
BSSL_NAMESPACE_END
struct ssl_cipher_st {
// name is the OpenSSL name for the cipher.
const char *name;
// standard_name is the IETF name for the cipher.
const char *standard_name;
// id is the cipher suite value bitwise OR-d with 0x03000000.
uint32_t id;
// algorithm_* determine the cipher suite. See constants below for the values.
uint32_t algorithm_mkey;
uint32_t algorithm_auth;
uint32_t algorithm_enc;
uint32_t algorithm_mac;
uint32_t algorithm_prf;
};
BSSL_NAMESPACE_BEGIN
// Bits for |algorithm_mkey| (key exchange algorithm).
#define SSL_kRSA 0x00000001u
#define SSL_kECDHE 0x00000002u
// SSL_kPSK is only set for plain PSK, not ECDHE_PSK.
#define SSL_kPSK 0x00000004u
#define SSL_kGENERIC 0x00000008u
// Bits for |algorithm_auth| (server authentication).
#define SSL_aRSA 0x00000001u
#define SSL_aECDSA 0x00000002u
// SSL_aPSK is set for both PSK and ECDHE_PSK.
#define SSL_aPSK 0x00000004u
#define SSL_aGENERIC 0x00000008u
#define SSL_aCERT (SSL_aRSA | SSL_aECDSA)
// Bits for |algorithm_enc| (symmetric encryption).
#define SSL_3DES 0x00000001u
#define SSL_AES128 0x00000002u
#define SSL_AES256 0x00000004u
#define SSL_AES128GCM 0x00000008u
#define SSL_AES256GCM 0x00000010u
#define SSL_CHACHA20POLY1305 0x00000020u
#define SSL_AES (SSL_AES128 | SSL_AES256 | SSL_AES128GCM | SSL_AES256GCM)
// Bits for |algorithm_mac| (symmetric authentication).
#define SSL_SHA1 0x00000001u
#define SSL_SHA256 0x00000002u
// SSL_AEAD is set for all AEADs.
#define SSL_AEAD 0x00000004u
// Bits for |algorithm_prf| (handshake digest).
#define SSL_HANDSHAKE_MAC_DEFAULT 0x1
#define SSL_HANDSHAKE_MAC_SHA256 0x2
#define SSL_HANDSHAKE_MAC_SHA384 0x4
// SSL_MAX_MD_SIZE is size of the largest hash function used in TLS, SHA-384.
#define SSL_MAX_MD_SIZE 48
// An SSLCipherPreferenceList contains a list of SSL_CIPHERs with equal-
// preference groups. For TLS clients, the groups are moot because the server
// picks the cipher and groups cannot be expressed on the wire. However, for
// servers, the equal-preference groups allow the client's preferences to be
// partially respected. (This only has an effect with
// SSL_OP_CIPHER_SERVER_PREFERENCE).
//
// The equal-preference groups are expressed by grouping SSL_CIPHERs together.
// All elements of a group have the same priority: no ordering is expressed
// within a group.
//
// The values in |ciphers| are in one-to-one correspondence with
// |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of
// bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to
// indicate that the corresponding SSL_CIPHER is not the last element of a
// group, or 0 to indicate that it is.
//
// For example, if |in_group_flags| contains all zeros then that indicates a
// traditional, fully-ordered preference. Every SSL_CIPHER is the last element
// of the group (i.e. they are all in a one-element group).
//
// For a more complex example, consider:
// ciphers: A B C D E F
// in_group_flags: 1 1 0 0 1 0
//
// That would express the following, order:
//
// A E
// B -> D -> F
// C
struct SSLCipherPreferenceList {
static constexpr bool kAllowUniquePtr = true;
SSLCipherPreferenceList() = default;
~SSLCipherPreferenceList();
bool Init(UniquePtr<STACK_OF(SSL_CIPHER)> ciphers,
Span<const bool> in_group_flags);
bool Init(const SSLCipherPreferenceList &);
void Remove(const SSL_CIPHER *cipher);
UniquePtr<STACK_OF(SSL_CIPHER)> ciphers;
bool *in_group_flags = nullptr;
};
// AllCiphers returns an array of all supported ciphers, sorted by id.
Span<const SSL_CIPHER> AllCiphers();
// ssl_cipher_get_evp_aead sets |*out_aead| to point to the correct EVP_AEAD
// object for |cipher| protocol version |version|. It sets |*out_mac_secret_len|
// and |*out_fixed_iv_len| to the MAC key length and fixed IV length,
// respectively. The MAC key length is zero except for legacy block and stream
// ciphers. It returns true on success and false on error.
bool ssl_cipher_get_evp_aead(const EVP_AEAD **out_aead,
size_t *out_mac_secret_len,
size_t *out_fixed_iv_len, const SSL_CIPHER *cipher,
uint16_t version, bool is_dtls);
// ssl_get_handshake_digest returns the |EVP_MD| corresponding to |version| and
// |cipher|.
const EVP_MD *ssl_get_handshake_digest(uint16_t version,
const SSL_CIPHER *cipher);
// ssl_create_cipher_list evaluates |rule_str|. It sets |*out_cipher_list| to a
// newly-allocated |SSLCipherPreferenceList| containing the result. It returns
// true on success and false on failure. If |strict| is true, nonsense will be
// rejected. If false, nonsense will be silently ignored. An empty result is
// considered an error regardless of |strict|. |has_aes_hw| indicates if the
// list should be ordered based on having support for AES in hardware or not.
bool ssl_create_cipher_list(UniquePtr<SSLCipherPreferenceList> *out_cipher_list,
const bool has_aes_hw, const char *rule_str,
bool strict);
// ssl_cipher_auth_mask_for_key returns the mask of cipher |algorithm_auth|
// values suitable for use with |key| in TLS 1.2 and below.
uint32_t ssl_cipher_auth_mask_for_key(const EVP_PKEY *key);
// ssl_cipher_uses_certificate_auth returns whether |cipher| authenticates the
// server and, optionally, the client with a certificate.
bool ssl_cipher_uses_certificate_auth(const SSL_CIPHER *cipher);
// ssl_cipher_requires_server_key_exchange returns whether |cipher| requires a
// ServerKeyExchange message.
//
// This function may return false while still allowing |cipher| an optional
// ServerKeyExchange. This is the case for plain PSK ciphers.
bool ssl_cipher_requires_server_key_exchange(const SSL_CIPHER *cipher);
// ssl_cipher_get_record_split_len, for TLS 1.0 CBC mode ciphers, returns the
// length of an encrypted 1-byte record, for use in record-splitting. Otherwise
// it returns zero.
size_t ssl_cipher_get_record_split_len(const SSL_CIPHER *cipher);
// ssl_choose_tls13_cipher returns an |SSL_CIPHER| corresponding with the best
// available from |cipher_suites| compatible with |version|, |group_id|, and
// |policy|. It returns NULL if there isn't a compatible cipher. |has_aes_hw|
// indicates if the choice should be made as if support for AES in hardware
// is available.
const SSL_CIPHER *ssl_choose_tls13_cipher(CBS cipher_suites, bool has_aes_hw,
uint16_t version, uint16_t group_id,
enum ssl_compliance_policy_t policy);
// ssl_tls13_cipher_meets_policy returns true if |cipher_id| is acceptable given
// |policy|.
bool ssl_tls13_cipher_meets_policy(uint16_t cipher_id,
enum ssl_compliance_policy_t policy);
// ssl_cipher_is_deprecated returns true if |cipher| is deprecated.
OPENSSL_EXPORT bool ssl_cipher_is_deprecated(const SSL_CIPHER *cipher);
// Transcript layer.
// SSLTranscript maintains the handshake transcript as a combination of a
// buffer and running hash.
class SSLTranscript {
public:
SSLTranscript();
~SSLTranscript();
SSLTranscript(SSLTranscript &&other) = default;
SSLTranscript &operator=(SSLTranscript &&other) = default;
// Init initializes the handshake transcript. If called on an existing
// transcript, it resets the transcript and hash. It returns true on success
// and false on failure.
bool Init();
// InitHash initializes the handshake hash based on the PRF and contents of
// the handshake transcript. Subsequent calls to |Update| will update the
// rolling hash. It returns one on success and zero on failure. It is an error
// to call this function after the handshake buffer is released. This may be
// called multiple times to change the hash function.
bool InitHash(uint16_t version, const SSL_CIPHER *cipher);
// UpdateForHelloRetryRequest resets the rolling hash with the
// HelloRetryRequest construction. It returns true on success and false on
// failure. It is an error to call this function before the handshake buffer
// is released.
bool UpdateForHelloRetryRequest();
// CopyToHashContext initializes |ctx| with |digest| and the data thus far in
// the transcript. It returns true on success and false on failure. If the
// handshake buffer is still present, |digest| may be any supported digest.
// Otherwise, |digest| must match the transcript hash.
bool CopyToHashContext(EVP_MD_CTX *ctx, const EVP_MD *digest) const;
Span<const uint8_t> buffer() const {
return MakeConstSpan(reinterpret_cast<const uint8_t *>(buffer_->data),
buffer_->length);
}
// FreeBuffer releases the handshake buffer. Subsequent calls to
// |Update| will not update the handshake buffer.
void FreeBuffer();
// DigestLen returns the length of the PRF hash.
size_t DigestLen() const;
// Digest returns the PRF hash. For TLS 1.1 and below, this is
// |EVP_md5_sha1|.
const EVP_MD *Digest() const;
// Update adds |in| to the handshake buffer and handshake hash, whichever is
// enabled. It returns true on success and false on failure.
bool Update(Span<const uint8_t> in);
// GetHash writes the handshake hash to |out| which must have room for at
// least |DigestLen| bytes. On success, it returns true and sets |*out_len| to
// the number of bytes written. Otherwise, it returns false.
bool GetHash(uint8_t *out, size_t *out_len) const;
// GetFinishedMAC computes the MAC for the Finished message into the bytes
// pointed by |out| and writes the number of bytes to |*out_len|. |out| must
// have room for |EVP_MAX_MD_SIZE| bytes. It returns true on success and false
// on failure.
bool GetFinishedMAC(uint8_t *out, size_t *out_len, const SSL_SESSION *session,
bool from_server) const;
private:
// buffer_, if non-null, contains the handshake transcript.
UniquePtr<BUF_MEM> buffer_;
// hash, if initialized with an |EVP_MD|, maintains the handshake hash.
ScopedEVP_MD_CTX hash_;
};
// tls1_prf computes the PRF function for |ssl|. It fills |out|, using |secret|
// as the secret and |label| as the label. |seed1| and |seed2| are concatenated
// to form the seed parameter. It returns true on success and false on failure.
bool tls1_prf(const EVP_MD *digest, Span<uint8_t> out,
Span<const uint8_t> secret, Span<const char> label,
Span<const uint8_t> seed1, Span<const uint8_t> seed2);
// Encryption layer.
// SSLAEADContext contains information about an AEAD that is being used to
// encrypt an SSL connection.
class SSLAEADContext {
public:
SSLAEADContext(uint16_t version, bool is_dtls, const SSL_CIPHER *cipher);
~SSLAEADContext();
static constexpr bool kAllowUniquePtr = true;
SSLAEADContext(const SSLAEADContext &&) = delete;
SSLAEADContext &operator=(const SSLAEADContext &&) = delete;
// CreateNullCipher creates an |SSLAEADContext| for the null cipher.
static UniquePtr<SSLAEADContext> CreateNullCipher(bool is_dtls);
// Create creates an |SSLAEADContext| using the supplied key material. It
// returns nullptr on error. Only one of |Open| or |Seal| may be used with the
// resulting object, depending on |direction|. |version| is the normalized
// protocol version, so DTLS 1.0 is represented as 0x0301, not 0xffef.
static UniquePtr<SSLAEADContext> Create(enum evp_aead_direction_t direction,
uint16_t version, bool is_dtls,
const SSL_CIPHER *cipher,
Span<const uint8_t> enc_key,
Span<const uint8_t> mac_key,
Span<const uint8_t> fixed_iv);
// CreatePlaceholderForQUIC creates a placeholder |SSLAEADContext| for the
// given cipher and version. The resulting object can be queried for various
// properties but cannot encrypt or decrypt data.
static UniquePtr<SSLAEADContext> CreatePlaceholderForQUIC(
uint16_t version, const SSL_CIPHER *cipher);
// SetVersionIfNullCipher sets the version the SSLAEADContext for the null
// cipher, to make version-specific determinations in the record layer prior
// to a cipher being selected.
void SetVersionIfNullCipher(uint16_t version);
// ProtocolVersion returns the protocol version associated with this
// SSLAEADContext. It can only be called once |version_| has been set to a
// valid value.
uint16_t ProtocolVersion() const;
// RecordVersion returns the record version that should be used with this
// SSLAEADContext for record construction and crypto.
uint16_t RecordVersion() const;
const SSL_CIPHER *cipher() const { return cipher_; }
// is_null_cipher returns true if this is the null cipher.
bool is_null_cipher() const { return !cipher_; }
// ExplicitNonceLen returns the length of the explicit nonce.
size_t ExplicitNonceLen() const;
// MaxOverhead returns the maximum overhead of calling |Seal|.
size_t MaxOverhead() const;
// SuffixLen calculates the suffix length written by |SealScatter| and writes
// it to |*out_suffix_len|. It returns true on success and false on error.
// |in_len| and |extra_in_len| should equal the argument of the same names
// passed to |SealScatter|.
bool SuffixLen(size_t *out_suffix_len, size_t in_len,
size_t extra_in_len) const;
// CiphertextLen calculates the total ciphertext length written by
// |SealScatter| and writes it to |*out_len|. It returns true on success and
// false on error. |in_len| and |extra_in_len| should equal the argument of
// the same names passed to |SealScatter|.
bool CiphertextLen(size_t *out_len, size_t in_len, size_t extra_in_len) const;
// Open authenticates and decrypts |in| in-place. On success, it sets |*out|
// to the plaintext in |in| and returns true. Otherwise, it returns
// false. The output will always be |ExplicitNonceLen| bytes ahead of |in|.
bool Open(Span<uint8_t> *out, uint8_t type, uint16_t record_version,
uint64_t seqnum, Span<const uint8_t> header, Span<uint8_t> in);
// Seal encrypts and authenticates |in_len| bytes from |in| and writes the
// result to |out|. It returns true on success and false on error.
//
// If |in| and |out| alias then |out| + |ExplicitNonceLen| must be == |in|.
bool Seal(uint8_t *out, size_t *out_len, size_t max_out, uint8_t type,
uint16_t record_version, uint64_t seqnum,
Span<const uint8_t> header, const uint8_t *in, size_t in_len);
// SealScatter encrypts and authenticates |in_len| bytes from |in| and splits
// the result between |out_prefix|, |out| and |out_suffix|. It returns one on
// success and zero on error.
//
// On successful return, exactly |ExplicitNonceLen| bytes are written to
// |out_prefix|, |in_len| bytes to |out|, and |SuffixLen| bytes to
// |out_suffix|.
//
// |extra_in| may point to an additional plaintext buffer. If present,
// |extra_in_len| additional bytes are encrypted and authenticated, and the
// ciphertext is written to the beginning of |out_suffix|. |SuffixLen| should
// be used to size |out_suffix| accordingly.
//
// If |in| and |out| alias then |out| must be == |in|. Other arguments may not
// alias anything.
bool SealScatter(uint8_t *out_prefix, uint8_t *out, uint8_t *out_suffix,
uint8_t type, uint16_t record_version, uint64_t seqnum,
Span<const uint8_t> header, const uint8_t *in, size_t in_len,
const uint8_t *extra_in, size_t extra_in_len);
bool GetIV(const uint8_t **out_iv, size_t *out_iv_len) const;
private:
// GetAdditionalData returns the additional data, writing into |storage| if
// necessary.
Span<const uint8_t> GetAdditionalData(uint8_t storage[13], uint8_t type,
uint16_t record_version,
uint64_t seqnum, size_t plaintext_len,
Span<const uint8_t> header);
const SSL_CIPHER *cipher_;
ScopedEVP_AEAD_CTX ctx_;
// fixed_nonce_ contains any bytes of the nonce that are fixed for all
// records.
uint8_t fixed_nonce_[12];
uint8_t fixed_nonce_len_ = 0, variable_nonce_len_ = 0;
// version_ is the wire version that should be used with this AEAD.
uint16_t version_;
// is_dtls_ is whether DTLS is being used with this AEAD.
bool is_dtls_;
// variable_nonce_included_in_record_ is true if the variable nonce
// for a record is included as a prefix before the ciphertext.
bool variable_nonce_included_in_record_ : 1;
// random_variable_nonce_ is true if the variable nonce is
// randomly generated, rather than derived from the sequence
// number.
bool random_variable_nonce_ : 1;
// xor_fixed_nonce_ is true if the fixed nonce should be XOR'd into the
// variable nonce rather than prepended.
bool xor_fixed_nonce_ : 1;
// omit_length_in_ad_ is true if the length should be omitted in the
// AEAD's ad parameter.
bool omit_length_in_ad_ : 1;
// ad_is_header_ is true if the AEAD's ad parameter is the record header.
bool ad_is_header_ : 1;
};
// DTLS replay bitmap.
// DTLS1_BITMAP maintains a sliding window of 64 sequence numbers to detect
// replayed packets. It should be initialized by zeroing every field.
struct DTLS1_BITMAP {
// map is a bit mask of the last 64 sequence numbers. Bit
// |1<<i| corresponds to |max_seq_num - i|.
uint64_t map = 0;
// max_seq_num is the largest sequence number seen so far as a 64-bit
// integer.
uint64_t max_seq_num = 0;
};
// Record layer.
// ssl_record_prefix_len returns the length of the prefix before the ciphertext
// of a record for |ssl|.
//
// TODO(davidben): Expose this as part of public API once the high-level
// buffer-free APIs are available.
size_t ssl_record_prefix_len(const SSL *ssl);
enum ssl_open_record_t {
ssl_open_record_success,
ssl_open_record_discard,
ssl_open_record_partial,
ssl_open_record_close_notify,
ssl_open_record_error,
};
// tls_open_record decrypts a record from |in| in-place.
//
// If the input did not contain a complete record, it returns
// |ssl_open_record_partial|. It sets |*out_consumed| to the total number of
// bytes necessary. It is guaranteed that a successful call to |tls_open_record|
// will consume at least that many bytes.
//
// Otherwise, it sets |*out_consumed| to the number of bytes of input
// consumed. Note that input may be consumed on all return codes if a record was
// decrypted.
//
// On success, it returns |ssl_open_record_success|. It sets |*out_type| to the
// record type and |*out| to the record body in |in|. Note that |*out| may be
// empty.
//
// If a record was successfully processed but should be discarded, it returns
// |ssl_open_record_discard|.
//
// If a record was successfully processed but is a close_notify, it returns
// |ssl_open_record_close_notify|.
//
// On failure or fatal alert, it returns |ssl_open_record_error| and sets
// |*out_alert| to an alert to emit, or zero if no alert should be emitted.
enum ssl_open_record_t tls_open_record(SSL *ssl, uint8_t *out_type,
Span<uint8_t> *out, size_t *out_consumed,
uint8_t *out_alert, Span<uint8_t> in);
// dtls_open_record implements |tls_open_record| for DTLS. It only returns
// |ssl_open_record_partial| if |in| was empty and sets |*out_consumed| to
// zero. The caller should read one packet and try again.
enum ssl_open_record_t dtls_open_record(SSL *ssl, uint8_t *out_type,
Span<uint8_t> *out,
size_t *out_consumed,
uint8_t *out_alert, Span<uint8_t> in);
// ssl_seal_align_prefix_len returns the length of the prefix before the start
// of the bulk of the ciphertext when sealing a record with |ssl|. Callers may
// use this to align buffers.
//
// Note when TLS 1.0 CBC record-splitting is enabled, this includes the one byte
// record and is the offset into second record's ciphertext. Thus sealing a
// small record may result in a smaller output than this value.
//
// TODO(davidben): Is this alignment valuable? Record-splitting makes this a
// mess.
size_t ssl_seal_align_prefix_len(const SSL *ssl);
// tls_seal_record seals a new record of type |type| and body |in| and writes it
// to |out|. At most |max_out| bytes will be written. It returns true on success
// and false on error. If enabled, |tls_seal_record| implements TLS 1.0 CBC
// 1/n-1 record splitting and may write two records concatenated.
//
// For a large record, the bulk of the ciphertext will begin
// |ssl_seal_align_prefix_len| bytes into out. Aligning |out| appropriately may
// improve performance. It writes at most |in_len| + |SSL_max_seal_overhead|
// bytes to |out|.
//
// |in| and |out| may not alias.
bool tls_seal_record(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out,
uint8_t type, const uint8_t *in, size_t in_len);
enum dtls1_use_epoch_t {
dtls1_use_previous_epoch,
dtls1_use_current_epoch,
};
// dtls_max_seal_overhead returns the maximum overhead, in bytes, of sealing a
// record.
size_t dtls_max_seal_overhead(const SSL *ssl, enum dtls1_use_epoch_t use_epoch);
// dtls_seal_prefix_len returns the number of bytes of prefix to reserve in
// front of the plaintext when sealing a record in-place.
size_t dtls_seal_prefix_len(const SSL *ssl, enum dtls1_use_epoch_t use_epoch);
// dtls_seal_record implements |tls_seal_record| for DTLS. |use_epoch| selects
// which epoch's cipher state to use. Unlike |tls_seal_record|, |in| and |out|
// may alias but, if they do, |in| must be exactly |dtls_seal_prefix_len| bytes
// ahead of |out|.
bool dtls_seal_record(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out,
uint8_t type, const uint8_t *in, size_t in_len,
enum dtls1_use_epoch_t use_epoch);
// ssl_process_alert processes |in| as an alert and updates |ssl|'s shutdown
// state. It returns one of |ssl_open_record_discard|, |ssl_open_record_error|,
// |ssl_open_record_close_notify|, or |ssl_open_record_fatal_alert| as
// appropriate.
enum ssl_open_record_t ssl_process_alert(SSL *ssl, uint8_t *out_alert,
Span<const uint8_t> in);
// Private key operations.
// ssl_has_private_key returns whether |hs| has a private key configured.
bool ssl_has_private_key(const SSL_HANDSHAKE *hs);
// ssl_private_key_* perform the corresponding operation on
// |SSL_PRIVATE_KEY_METHOD|. If there is a custom private key configured, they
// call the corresponding function or |complete| depending on whether there is a
// pending operation. Otherwise, they implement the operation with
// |EVP_PKEY|.
enum ssl_private_key_result_t ssl_private_key_sign(
SSL_HANDSHAKE *hs, uint8_t *out, size_t *out_len, size_t max_out,
uint16_t sigalg, Span<const uint8_t> in);
enum ssl_private_key_result_t ssl_private_key_decrypt(SSL_HANDSHAKE *hs,
uint8_t *out,
size_t *out_len,
size_t max_out,
Span<const uint8_t> in);
// ssl_private_key_supports_signature_algorithm returns whether |hs|'s private
// key supports |sigalg|.
bool ssl_private_key_supports_signature_algorithm(SSL_HANDSHAKE *hs,
uint16_t sigalg);
// ssl_public_key_verify verifies that the |signature| is valid for the public
// key |pkey| and input |in|, using the signature algorithm |sigalg|.
bool ssl_public_key_verify(SSL *ssl, Span<const uint8_t> signature,
uint16_t sigalg, EVP_PKEY *pkey,
Span<const uint8_t> in);
// Key shares.
// SSLKeyShare abstracts over KEM-like constructions, for use with TLS 1.2 ECDHE
// cipher suites and the TLS 1.3 key_share extension.
//
// TODO(davidben): This class is named SSLKeyShare after the TLS 1.3 key_share
// extension, but it really implements a KEM abstraction. Additionally, we use
// the same type for Encap, which is a one-off, stateless operation, as Generate
// and Decap. Slightly tidier would be for Generate to return a new SSLKEMKey
// (or we introduce EVP_KEM and EVP_KEM_KEY), with a Decap method, and for Encap
// to be static function.
class SSLKeyShare {
public:
virtual ~SSLKeyShare() {}
static constexpr bool kAllowUniquePtr = true;
HAS_VIRTUAL_DESTRUCTOR
// Create returns a SSLKeyShare instance for use with group |group_id| or
// nullptr on error.
static UniquePtr<SSLKeyShare> Create(uint16_t group_id);
// GroupID returns the group ID.
virtual uint16_t GroupID() const PURE_VIRTUAL;
// Generate generates a keypair and writes the public key to |out_public_key|.
// It returns true on success and false on error.
virtual bool Generate(CBB *out_public_key) PURE_VIRTUAL;
// Encap generates an ephemeral, symmetric secret and encapsulates it with
// |peer_key|. On success, it returns true, writes the encapsulated secret to
// |out_ciphertext|, and sets |*out_secret| to the shared secret. On failure,
// it returns false and sets |*out_alert| to an alert to send to the peer.
virtual bool Encap(CBB *out_ciphertext, Array<uint8_t> *out_secret,
uint8_t *out_alert,
Span<const uint8_t> peer_key) PURE_VIRTUAL;
// Decap decapsulates the symmetric secret in |ciphertext|. On success, it
// returns true and sets |*out_secret| to the shared secret. On failure, it
// returns false and sets |*out_alert| to an alert to send to the peer.
virtual bool Decap(Array<uint8_t> *out_secret, uint8_t *out_alert,
Span<const uint8_t> ciphertext) PURE_VIRTUAL;
// SerializePrivateKey writes the private key to |out|, returning true if
// successful and false otherwise. It should be called after |Generate|.
virtual bool SerializePrivateKey(CBB *out) { return false; }
// DeserializePrivateKey initializes the state of the key exchange from |in|,
// returning true if successful and false otherwise.
virtual bool DeserializePrivateKey(CBS *in) { return false; }
};
struct NamedGroup {
int nid;
uint16_t group_id;
const char name[32], alias[32];
};
// NamedGroups returns all supported groups.
Span<const NamedGroup> NamedGroups();
// ssl_nid_to_group_id looks up the group corresponding to |nid|. On success, it
// sets |*out_group_id| to the group ID and returns true. Otherwise, it returns
// false.
bool ssl_nid_to_group_id(uint16_t *out_group_id, int nid);
// ssl_name_to_group_id looks up the group corresponding to the |name| string of
// length |len|. On success, it sets |*out_group_id| to the group ID and returns
// true. Otherwise, it returns false.
bool ssl_name_to_group_id(uint16_t *out_group_id, const char *name, size_t len);
// ssl_group_id_to_nid returns the NID corresponding to |group_id| or
// |NID_undef| if unknown.
int ssl_group_id_to_nid(uint16_t group_id);
// Handshake messages.
struct SSLMessage {
bool is_v2_hello;
uint8_t type;
CBS body;
// raw is the entire serialized handshake message, including the TLS or DTLS
// message header.
CBS raw;
};
// SSL_MAX_HANDSHAKE_FLIGHT is the number of messages, including
// ChangeCipherSpec, in the longest handshake flight. Currently this is the
// client's second leg in a full handshake when client certificates, NPN, and
// Channel ID, are all enabled.
#define SSL_MAX_HANDSHAKE_FLIGHT 7
extern const uint8_t kHelloRetryRequest[SSL3_RANDOM_SIZE];
extern const uint8_t kTLS12DowngradeRandom[8];
extern const uint8_t kTLS13DowngradeRandom[8];
extern const uint8_t kJDK11DowngradeRandom[8];
// ssl_max_handshake_message_len returns the maximum number of bytes permitted
// in a handshake message for |ssl|.
size_t ssl_max_handshake_message_len(const SSL *ssl);
// tls_can_accept_handshake_data returns whether |ssl| is able to accept more
// data into handshake buffer.
bool tls_can_accept_handshake_data(const SSL *ssl, uint8_t *out_alert);
// tls_has_unprocessed_handshake_data returns whether there is buffered
// handshake data that has not been consumed by |get_message|.
bool tls_has_unprocessed_handshake_data(const SSL *ssl);
// tls_append_handshake_data appends |data| to the handshake buffer. It returns
// true on success and false on allocation failure.
bool tls_append_handshake_data(SSL *ssl, Span<const uint8_t> data);
// dtls_has_unprocessed_handshake_data behaves like
// |tls_has_unprocessed_handshake_data| for DTLS.
bool dtls_has_unprocessed_handshake_data(const SSL *ssl);
// tls_flush_pending_hs_data flushes any handshake plaintext data.
bool tls_flush_pending_hs_data(SSL *ssl);
struct DTLS_OUTGOING_MESSAGE {
DTLS_OUTGOING_MESSAGE() {}
DTLS_OUTGOING_MESSAGE(const DTLS_OUTGOING_MESSAGE &) = delete;
DTLS_OUTGOING_MESSAGE &operator=(const DTLS_OUTGOING_MESSAGE &) = delete;
void Clear();
Array<uint8_t> data;
uint16_t epoch = 0;
bool is_ccs = false;
};
// dtls_clear_outgoing_messages releases all buffered outgoing messages.
void dtls_clear_outgoing_messages(SSL *ssl);
// Callbacks.
// ssl_do_info_callback calls |ssl|'s info callback, if set.
void ssl_do_info_callback(const SSL *ssl, int type, int value);
// ssl_do_msg_callback calls |ssl|'s message callback, if set.
void ssl_do_msg_callback(const SSL *ssl, int is_write, int content_type,
Span<const uint8_t> in);
// Transport buffers.
class SSLBuffer {
public:
SSLBuffer() {}
~SSLBuffer() { Clear(); }
SSLBuffer(const SSLBuffer &) = delete;
SSLBuffer &operator=(const SSLBuffer &) = delete;
uint8_t *data() { return buf_ + offset_; }
size_t size() const { return size_; }
bool empty() const { return size_ == 0; }
size_t cap() const { return cap_; }
Span<uint8_t> span() { return MakeSpan(data(), size()); }
Span<uint8_t> remaining() {
return MakeSpan(data() + size(), cap() - size());
}
// Clear releases the buffer.
void Clear();
// EnsureCap ensures the buffer has capacity at least |new_cap|, aligned such
// that data written after |header_len| is aligned to a
// |SSL3_ALIGN_PAYLOAD|-byte boundary. It returns true on success and false
// on error.
bool EnsureCap(size_t header_len, size_t new_cap);
// DidWrite extends the buffer by |len|. The caller must have filled in to
// this point.
void DidWrite(size_t len);
// Consume consumes |len| bytes from the front of the buffer. The memory
// consumed will remain valid until the next call to |DiscardConsumed| or
// |Clear|.
void Consume(size_t len);
// DiscardConsumed discards the consumed bytes from the buffer. If the buffer
// is now empty, it releases memory used by it.
void DiscardConsumed();
private:
// buf_ is the memory allocated for this buffer.
uint8_t *buf_ = nullptr;
// offset_ is the offset into |buf_| which the buffer contents start at.
uint16_t offset_ = 0;
// size_ is the size of the buffer contents from |buf_| + |offset_|.
uint16_t size_ = 0;
// cap_ is how much memory beyond |buf_| + |offset_| is available.
uint16_t cap_ = 0;
// inline_buf_ is a static buffer for short reads.
uint8_t inline_buf_[SSL3_RT_HEADER_LENGTH];
// buf_allocated_ is true if |buf_| points to allocated data and must be freed
// or false if it points into |inline_buf_|.
bool buf_allocated_ = false;
};
// ssl_read_buffer_extend_to extends the read buffer to the desired length. For
// TLS, it reads to the end of the buffer until the buffer is |len| bytes
// long. For DTLS, it reads a new packet and ignores |len|. It returns one on
// success, zero on EOF, and a negative number on error.
//
// It is an error to call |ssl_read_buffer_extend_to| in DTLS when the buffer is
// non-empty.
int ssl_read_buffer_extend_to(SSL *ssl, size_t len);
// ssl_handle_open_record handles the result of passing |ssl->s3->read_buffer|
// to a record-processing function. If |ret| is a success or if the caller
// should retry, it returns one and sets |*out_retry|. Otherwise, it returns <=
// 0.
int ssl_handle_open_record(SSL *ssl, bool *out_retry, ssl_open_record_t ret,
size_t consumed, uint8_t alert);
// ssl_write_buffer_flush flushes the write buffer to the transport. It returns
// one on success and <= 0 on error. For DTLS, whether or not the write
// succeeds, the write buffer will be cleared.
int ssl_write_buffer_flush(SSL *ssl);
// Certificate functions.
// ssl_has_certificate returns whether a certificate and private key are
// configured.
bool ssl_has_certificate(const SSL_HANDSHAKE *hs);
// ssl_parse_cert_chain parses a certificate list from |cbs| in the format used
// by a TLS Certificate message. On success, it advances |cbs| and returns
// true. Otherwise, it returns false and sets |*out_alert| to an alert to send
// to the peer.
//
// If the list is non-empty then |*out_chain| and |*out_pubkey| will be set to
// the certificate chain and the leaf certificate's public key
// respectively. Otherwise, both will be set to nullptr.
//
// If the list is non-empty and |out_leaf_sha256| is non-NULL, it writes the
// SHA-256 hash of the leaf to |out_leaf_sha256|.
bool ssl_parse_cert_chain(uint8_t *out_alert,
UniquePtr<STACK_OF(CRYPTO_BUFFER)> *out_chain,
UniquePtr<EVP_PKEY> *out_pubkey,
uint8_t *out_leaf_sha256, CBS *cbs,
CRYPTO_BUFFER_POOL *pool);
// ssl_add_cert_chain adds |hs->ssl|'s certificate chain to |cbb| in the format
// used by a TLS Certificate message. If there is no certificate chain, it emits
// an empty certificate list. It returns true on success and false on error.
bool ssl_add_cert_chain(SSL_HANDSHAKE *hs, CBB *cbb);
enum ssl_key_usage_t {
key_usage_digital_signature = 0,
key_usage_encipherment = 2,
};
// ssl_cert_check_key_usage parses the DER-encoded, X.509 certificate in |in|
// and returns true if doesn't specify a key usage or, if it does, if it
// includes |bit|. Otherwise it pushes to the error queue and returns false.
OPENSSL_EXPORT bool ssl_cert_check_key_usage(const CBS *in,
enum ssl_key_usage_t bit);
// ssl_cert_parse_pubkey extracts the public key from the DER-encoded, X.509
// certificate in |in|. It returns an allocated |EVP_PKEY| or else returns
// nullptr and pushes to the error queue.
UniquePtr<EVP_PKEY> ssl_cert_parse_pubkey(const CBS *in);
// ssl_parse_client_CA_list parses a CA list from |cbs| in the format used by a
// TLS CertificateRequest message. On success, it returns a newly-allocated
// |CRYPTO_BUFFER| list and advances |cbs|. Otherwise, it returns nullptr and
// sets |*out_alert| to an alert to send to the peer.
UniquePtr<STACK_OF(CRYPTO_BUFFER)> ssl_parse_client_CA_list(SSL *ssl,
uint8_t *out_alert,
CBS *cbs);
// ssl_has_client_CAs returns there are configured CAs.
bool ssl_has_client_CAs(const SSL_CONFIG *cfg);
// ssl_add_client_CA_list adds the configured CA list to |cbb| in the format
// used by a TLS CertificateRequest message. It returns true on success and
// false on error.
bool ssl_add_client_CA_list(SSL_HANDSHAKE *hs, CBB *cbb);
// ssl_check_leaf_certificate returns one if |pkey| and |leaf| are suitable as
// a server's leaf certificate for |hs|. Otherwise, it returns zero and pushes
// an error on the error queue.
bool ssl_check_leaf_certificate(SSL_HANDSHAKE *hs, EVP_PKEY *pkey,
const CRYPTO_BUFFER *leaf);
// ssl_on_certificate_selected is called once the certificate has been selected.
// It finalizes the certificate and initializes |hs->local_pubkey|. It returns
// true on success and false on error.
bool ssl_on_certificate_selected(SSL_HANDSHAKE *hs);
// TLS 1.3 key derivation.
// tls13_init_key_schedule initializes the handshake hash and key derivation
// state, and incorporates the PSK. The cipher suite and PRF hash must have been
// selected at this point. It returns true on success and false on error.
bool tls13_init_key_schedule(SSL_HANDSHAKE *hs, Span<const uint8_t> psk);
// tls13_init_early_key_schedule initializes the handshake hash and key
// derivation state from |session| for use with 0-RTT. It returns one on success
// and zero on error.
bool tls13_init_early_key_schedule(SSL_HANDSHAKE *hs,
const SSL_SESSION *session);
// tls13_advance_key_schedule incorporates |in| into the key schedule with
// HKDF-Extract. It returns true on success and false on error.
bool tls13_advance_key_schedule(SSL_HANDSHAKE *hs, Span<const uint8_t> in);
// tls13_set_traffic_key sets the read or write traffic keys to
// |traffic_secret|. The version and cipher suite are determined from |session|.
// It returns true on success and false on error.
bool tls13_set_traffic_key(SSL *ssl, enum ssl_encryption_level_t level,
enum evp_aead_direction_t direction,
const SSL_SESSION *session,
Span<const uint8_t> traffic_secret);
// tls13_derive_early_secret derives the early traffic secret. It returns true
// on success and false on error.
bool tls13_derive_early_secret(SSL_HANDSHAKE *hs);
// tls13_derive_handshake_secrets derives the handshake traffic secret. It
// returns true on success and false on error.
bool tls13_derive_handshake_secrets(SSL_HANDSHAKE *hs);
// tls13_rotate_traffic_key derives the next read or write traffic secret. It
// returns true on success and false on error.
bool tls13_rotate_traffic_key(SSL *ssl, enum evp_aead_direction_t direction);
// tls13_derive_application_secrets derives the initial application data traffic
// and exporter secrets based on the handshake transcripts and |master_secret|.
// It returns true on success and false on error.
bool tls13_derive_application_secrets(SSL_HANDSHAKE *hs);
// tls13_derive_resumption_secret derives the |resumption_secret|.
bool tls13_derive_resumption_secret(SSL_HANDSHAKE *hs);
// tls13_export_keying_material provides an exporter interface to use the
// |exporter_secret|.
bool tls13_export_keying_material(SSL *ssl, Span<uint8_t> out,
Span<const uint8_t> secret,
Span<const char> label,
Span<const uint8_t> context);
// tls13_finished_mac calculates the MAC of the handshake transcript to verify
// the integrity of the Finished message, and stores the result in |out| and
// length in |out_len|. |is_server| is true if this is for the Server Finished
// and false for the Client Finished.
bool tls13_finished_mac(SSL_HANDSHAKE *hs, uint8_t *out, size_t *out_len,
bool is_server);
// tls13_derive_session_psk calculates the PSK for this session based on the
// resumption master secret and |nonce|. It returns true on success, and false
// on failure.
bool tls13_derive_session_psk(SSL_SESSION *session, Span<const uint8_t> nonce);
// tls13_write_psk_binder calculates the PSK binder value over |transcript| and
// |msg|, and replaces the last bytes of |msg| with the resulting value. It
// returns true on success, and false on failure. If |out_binder_len| is
// non-NULL, it sets |*out_binder_len| to the length of the value computed.
bool tls13_write_psk_binder(const SSL_HANDSHAKE *hs,
const SSLTranscript &transcript, Span<uint8_t> msg,
size_t *out_binder_len);
// tls13_verify_psk_binder verifies that the handshake transcript, truncated up
// to the binders has a valid signature using the value of |session|'s
// resumption secret. It returns true on success, and false on failure.
bool tls13_verify_psk_binder(const SSL_HANDSHAKE *hs,
const SSL_SESSION *session, const SSLMessage &msg,
CBS *binders);
// Encrypted ClientHello.
struct ECHConfig {
static constexpr bool kAllowUniquePtr = true;
// raw contains the serialized ECHConfig.
Array<uint8_t> raw;
// The following fields alias into |raw|.
Span<const uint8_t> public_key;
Span<const uint8_t> public_name;
Span<const uint8_t> cipher_suites;
uint16_t kem_id = 0;
uint8_t maximum_name_length = 0;
uint8_t config_id = 0;
};
class ECHServerConfig {
public:
static constexpr bool kAllowUniquePtr = true;
ECHServerConfig() = default;
ECHServerConfig(const ECHServerConfig &other) = delete;
ECHServerConfig &operator=(ECHServerConfig &&) = delete;
// Init parses |ech_config| as an ECHConfig and saves a copy of |key|.
// It returns true on success and false on error.
bool Init(Span<const uint8_t> ech_config, const EVP_HPKE_KEY *key,
bool is_retry_config);
// SetupContext sets up |ctx| for a new connection, given the specified
// HPKE ciphersuite and encapsulated KEM key. It returns true on success and
// false on error. This function may only be called on an initialized object.
bool SetupContext(EVP_HPKE_CTX *ctx, uint16_t kdf_id, uint16_t aead_id,
Span<const uint8_t> enc) const;
const ECHConfig &ech_config() const { return ech_config_; }
bool is_retry_config() const { return is_retry_config_; }
private:
ECHConfig ech_config_;
ScopedEVP_HPKE_KEY key_;
bool is_retry_config_ = false;
};
enum ssl_client_hello_type_t {
ssl_client_hello_unencrypted,
ssl_client_hello_inner,
ssl_client_hello_outer,
};
// ECH_CLIENT_* are types for the ClientHello encrypted_client_hello extension.
#define ECH_CLIENT_OUTER 0
#define ECH_CLIENT_INNER 1
// ssl_decode_client_hello_inner recovers the full ClientHelloInner from the
// EncodedClientHelloInner |encoded_client_hello_inner| by replacing its
// outer_extensions extension with the referenced extensions from the
// ClientHelloOuter |client_hello_outer|. If successful, it writes the recovered
// ClientHelloInner to |out_client_hello_inner|. It returns true on success and
// false on failure.
//
// This function is exported for fuzzing.
OPENSSL_EXPORT bool ssl_decode_client_hello_inner(
SSL *ssl, uint8_t *out_alert, Array<uint8_t> *out_client_hello_inner,
Span<const uint8_t> encoded_client_hello_inner,
const SSL_CLIENT_HELLO *client_hello_outer);
// ssl_client_hello_decrypt attempts to decrypt and decode the |payload|. It
// writes the result to |*out|. |payload| must point into |client_hello_outer|.
// It returns true on success and false on error. On error, it sets
// |*out_is_decrypt_error| to whether the failure was due to a bad ciphertext.
bool ssl_client_hello_decrypt(SSL_HANDSHAKE *hs, uint8_t *out_alert,
bool *out_is_decrypt_error, Array<uint8_t> *out,
const SSL_CLIENT_HELLO *client_hello_outer,
Span<const uint8_t> payload);
#define ECH_CONFIRMATION_SIGNAL_LEN 8
// ssl_ech_confirmation_signal_hello_offset returns the offset of the ECH
// confirmation signal in a ServerHello message, including the handshake header.
size_t ssl_ech_confirmation_signal_hello_offset(const SSL *ssl);
// ssl_ech_accept_confirmation computes the server's ECH acceptance signal,
// writing it to |out|. The transcript portion is the concatenation of
// |transcript| with |msg|. The |ECH_CONFIRMATION_SIGNAL_LEN| bytes from
// |offset| in |msg| are replaced with zeros before hashing. This function
// returns true on success, and false on failure.
bool ssl_ech_accept_confirmation(const SSL_HANDSHAKE *hs, Span<uint8_t> out,
Span<const uint8_t> client_random,
const SSLTranscript &transcript, bool is_hrr,
Span<const uint8_t> msg, size_t offset);
// ssl_is_valid_ech_public_name returns true if |public_name| is a valid ECH
// public name and false otherwise. It is exported for testing.
OPENSSL_EXPORT bool ssl_is_valid_ech_public_name(
Span<const uint8_t> public_name);
// ssl_is_valid_ech_config_list returns true if |ech_config_list| is a valid
// ECHConfigList structure and false otherwise.
bool ssl_is_valid_ech_config_list(Span<const uint8_t> ech_config_list);
// ssl_select_ech_config selects an ECHConfig and associated parameters to offer
// on the client and updates |hs|. It returns true on success, whether an
// ECHConfig was found or not, and false on internal error. On success, the
// encapsulated key is written to |out_enc| and |*out_enc_len| is set to the
// number of bytes written. If the function did not select an ECHConfig, the
// encapsulated key is the empty string.
bool ssl_select_ech_config(SSL_HANDSHAKE *hs, Span<uint8_t> out_enc,
size_t *out_enc_len);
// ssl_ech_extension_body_length returns the length of the body of a ClientHello
// ECH extension that encrypts |in_len| bytes with |aead| and an 'enc' value of
// length |enc_len|. The result does not include the four-byte extension header.
size_t ssl_ech_extension_body_length(const EVP_HPKE_AEAD *aead, size_t enc_len,
size_t in_len);
// ssl_encrypt_client_hello constructs a new ClientHelloInner, adds it to the
// inner transcript, and encrypts for inclusion in the ClientHelloOuter. |enc|
// is the encapsulated key to include in the extension. It returns true on
// success and false on error. If not offering ECH, |enc| is ignored and the
// function will compute a GREASE ECH extension if necessary, and otherwise
// return success while doing nothing.
//
// Encrypting the ClientHelloInner incorporates all extensions in the
// ClientHelloOuter, so all other state necessary for |ssl_add_client_hello|
// must already be computed.
bool ssl_encrypt_client_hello(SSL_HANDSHAKE *hs, Span<const uint8_t> enc);
// Delegated credentials.
// This structure stores a delegated credential (DC) as defined by
// draft-ietf-tls-subcerts-03.
struct DC {
static constexpr bool kAllowUniquePtr = true;
~DC();
// Dup returns a copy of this DC and takes references to |raw| and |pkey|.
UniquePtr<DC> Dup();
// Parse parses the delegated credential stored in |in|. If successful it
// returns the parsed structure, otherwise it returns |nullptr| and sets
// |*out_alert|.
static UniquePtr<DC> Parse(CRYPTO_BUFFER *in, uint8_t *out_alert);
// raw is the delegated credential encoded as specified in draft-ietf-tls-
// subcerts-03.
UniquePtr<CRYPTO_BUFFER> raw;
// expected_cert_verify_algorithm is the signature scheme of the DC public
// key.
uint16_t expected_cert_verify_algorithm = 0;
// pkey is the public key parsed from |public_key|.
UniquePtr<EVP_PKEY> pkey;
private:
friend DC* New<DC>();
DC();
};
// ssl_signing_with_dc returns true if the peer has indicated support for
// delegated credentials and this host has sent a delegated credential in
// response. If this is true then we've committed to using the DC in the
// handshake.
bool ssl_signing_with_dc(const SSL_HANDSHAKE *hs);
// Handshake functions.
enum ssl_hs_wait_t {
ssl_hs_error,
ssl_hs_ok,
ssl_hs_read_server_hello,
ssl_hs_read_message,
ssl_hs_flush,
ssl_hs_certificate_selection_pending,
ssl_hs_handoff,
ssl_hs_handback,
ssl_hs_x509_lookup,
ssl_hs_private_key_operation,
ssl_hs_pending_session,
ssl_hs_pending_ticket,
ssl_hs_early_return,
ssl_hs_early_data_rejected,
ssl_hs_read_end_of_early_data,
ssl_hs_read_change_cipher_spec,
ssl_hs_certificate_verify,
ssl_hs_hints_ready,
};
enum ssl_grease_index_t {
ssl_grease_cipher = 0,
ssl_grease_group,
ssl_grease_extension1,
ssl_grease_extension2,
ssl_grease_version,
ssl_grease_ticket_extension,
ssl_grease_ech_config_id,
ssl_grease_last_index = ssl_grease_ech_config_id,
};
enum tls12_server_hs_state_t {
state12_start_accept = 0,
state12_read_client_hello,
state12_read_client_hello_after_ech,
state12_select_certificate,
state12_tls13,
state12_select_parameters,
state12_send_server_hello,
state12_send_server_certificate,
state12_send_server_key_exchange,
state12_send_server_hello_done,
state12_read_client_certificate,
state12_verify_client_certificate,
state12_read_client_key_exchange,
state12_read_client_certificate_verify,
state12_read_change_cipher_spec,
state12_process_change_cipher_spec,
state12_read_next_proto,
state12_read_channel_id,
state12_read_client_finished,
state12_send_server_finished,
state12_finish_server_handshake,
state12_done,
};
enum tls13_server_hs_state_t {
state13_select_parameters = 0,
state13_select_session,
state13_send_hello_retry_request,
state13_read_second_client_hello,
state13_send_server_hello,
state13_send_server_certificate_verify,
state13_send_server_finished,
state13_send_half_rtt_ticket,
state13_read_second_client_flight,
state13_process_end_of_early_data,
state13_read_client_encrypted_extensions,
state13_read_client_certificate,
state13_read_client_certificate_verify,
state13_read_channel_id,
state13_read_client_finished,
state13_send_new_session_ticket,
state13_done,
};
// handback_t lists the points in the state machine where a handback can occur.
// These are the different points at which key material is no longer needed.
enum handback_t {
handback_after_session_resumption = 0,
handback_after_ecdhe = 1,
handback_after_handshake = 2,
handback_tls13 = 3,
handback_max_value = handback_tls13,
};
// SSL_HANDSHAKE_HINTS contains handshake hints for a connection. See
// |SSL_request_handshake_hints| and related functions.
struct SSL_HANDSHAKE_HINTS {
static constexpr bool kAllowUniquePtr = true;
Array<uint8_t> server_random_tls12;
Array<uint8_t> server_random_tls13;
uint16_t key_share_group_id = 0;
Array<uint8_t> key_share_ciphertext;
Array<uint8_t> key_share_secret;
uint16_t signature_algorithm = 0;
Array<uint8_t> signature_input;
Array<uint8_t> signature_spki;
Array<uint8_t> signature;
Array<uint8_t> decrypted_psk;
bool ignore_psk = false;
uint16_t cert_compression_alg_id = 0;
Array<uint8_t> cert_compression_input;
Array<uint8_t> cert_compression_output;
uint16_t ecdhe_group_id = 0;
Array<uint8_t> ecdhe_public_key;
Array<uint8_t> ecdhe_private_key;
Array<uint8_t> decrypted_ticket;
bool renew_ticket = false;
bool ignore_ticket = false;
};
struct SSL_HANDSHAKE {
explicit SSL_HANDSHAKE(SSL *ssl);
~SSL_HANDSHAKE();
static constexpr bool kAllowUniquePtr = true;
// ssl is a non-owning pointer to the parent |SSL| object.
SSL *ssl;
// config is a non-owning pointer to the handshake configuration.
SSL_CONFIG *config;
// wait contains the operation the handshake is currently blocking on or
// |ssl_hs_ok| if none.
enum ssl_hs_wait_t wait = ssl_hs_ok;
// state is the internal state for the TLS 1.2 and below handshake. Its
// values depend on |do_handshake| but the starting state is always zero.
int state = 0;
// tls13_state is the internal state for the TLS 1.3 handshake. Its values
// depend on |do_handshake| but the starting state is always zero.
int tls13_state = 0;
// min_version is the minimum accepted protocol version, taking account both
// |SSL_OP_NO_*| and |SSL_CTX_set_min_proto_version| APIs.
uint16_t min_version = 0;
// max_version is the maximum accepted protocol version, taking account both
// |SSL_OP_NO_*| and |SSL_CTX_set_max_proto_version| APIs.
uint16_t max_version = 0;
private:
size_t hash_len_ = 0;
uint8_t secret_[SSL_MAX_MD_SIZE] = {0};
uint8_t early_traffic_secret_[SSL_MAX_MD_SIZE] = {0};
uint8_t client_handshake_secret_[SSL_MAX_MD_SIZE] = {0};
uint8_t server_handshake_secret_[SSL_MAX_MD_SIZE] = {0};
uint8_t client_traffic_secret_0_[SSL_MAX_MD_SIZE] = {0};
uint8_t server_traffic_secret_0_[SSL_MAX_MD_SIZE] = {0};
uint8_t expected_client_finished_[SSL_MAX_MD_SIZE] = {0};
public:
void ResizeSecrets(size_t hash_len);
// GetClientHello, on the server, returns either the normal ClientHello
// message or the ClientHelloInner if it has been serialized to
// |ech_client_hello_buf|. This function should only be called when the
// current message is a ClientHello. It returns true on success and false on
// error.
//
// Note that fields of the returned |out_msg| and |out_client_hello| point
// into a handshake-owned buffer, so their lifetimes should not exceed this
// SSL_HANDSHAKE.
bool GetClientHello(SSLMessage *out_msg, SSL_CLIENT_HELLO *out_client_hello);
Span<uint8_t> secret() { return MakeSpan(secret_, hash_len_); }
Span<const uint8_t> secret() const {
return MakeConstSpan(secret_, hash_len_);
}
Span<uint8_t> early_traffic_secret() {
return MakeSpan(early_traffic_secret_, hash_len_);
}
Span<uint8_t> client_handshake_secret() {
return MakeSpan(client_handshake_secret_, hash_len_);
}
Span<uint8_t> server_handshake_secret() {
return MakeSpan(server_handshake_secret_, hash_len_);
}
Span<uint8_t> client_traffic_secret_0() {
return MakeSpan(client_traffic_secret_0_, hash_len_);
}
Span<uint8_t> server_traffic_secret_0() {
return MakeSpan(server_traffic_secret_0_, hash_len_);
}
Span<uint8_t> expected_client_finished() {
return MakeSpan(expected_client_finished_, hash_len_);
}
union {
// sent is a bitset where the bits correspond to elements of kExtensions
// in extensions.cc. Each bit is set if that extension was sent in a
// ClientHello. It's not used by servers.
uint32_t sent = 0;
// received is a bitset, like |sent|, but is used by servers to record
// which extensions were received from a client.
uint32_t received;
} extensions;
// inner_extensions_sent, on clients that offer ECH, is |extensions.sent| for
// the ClientHelloInner.
uint32_t inner_extensions_sent = 0;
// error, if |wait| is |ssl_hs_error|, is the error the handshake failed on.
UniquePtr<ERR_SAVE_STATE> error;
// key_shares are the current key exchange instances. The second is only used
// as a client if we believe that we should offer two key shares in a
// ClientHello.
UniquePtr<SSLKeyShare> key_shares[2];
// transcript is the current handshake transcript.
SSLTranscript transcript;
// inner_transcript, on the client, is the handshake transcript for the
// ClientHelloInner handshake. It is moved to |transcript| if the server
// accepts ECH.
SSLTranscript inner_transcript;
// inner_client_random is the ClientHello random value used with
// ClientHelloInner.
uint8_t inner_client_random[SSL3_RANDOM_SIZE] = {0};
// cookie is the value of the cookie in HelloRetryRequest, or empty if none
// was received.
Array<uint8_t> cookie;
// dtls_cookie is the value of the cookie in DTLS HelloVerifyRequest. If
// empty, either none was received or HelloVerifyRequest contained an empty
// cookie.
Array<uint8_t> dtls_cookie;
// ech_client_outer contains the outer ECH extension to send in the
// ClientHello, excluding the header and type byte.
Array<uint8_t> ech_client_outer;
// ech_retry_configs, on the client, contains the retry configs from the
// server as a serialized ECHConfigList.
Array<uint8_t> ech_retry_configs;
// ech_client_hello_buf, on the server, contains the bytes of the
// reconstructed ClientHelloInner message.
Array<uint8_t> ech_client_hello_buf;
// key_share_bytes is the key_share extension that the client should send.
Array<uint8_t> key_share_bytes;
// key_share_ciphertext, for servers, is encapsulated shared secret to be sent
// to the client in the TLS 1.3 key_share extension.
Array<uint8_t> key_share_ciphertext;
// peer_sigalgs are the signature algorithms that the peer supports. These are
// taken from the contents of the signature algorithms extension for a server
// or from the CertificateRequest for a client.
Array<uint16_t> peer_sigalgs;
// peer_supported_group_list contains the supported group IDs advertised by
// the peer. This is only set on the server's end. The server does not
// advertise this extension to the client.
Array<uint16_t> peer_supported_group_list;
// peer_delegated_credential_sigalgs are the signature algorithms the peer
// supports with delegated credentials.
Array<uint16_t> peer_delegated_credential_sigalgs;
// peer_key is the peer's ECDH key for a TLS 1.2 client.
Array<uint8_t> peer_key;
// extension_permutation is the permutation to apply to ClientHello
// extensions. It maps indices into the |kExtensions| table into other
// indices.
Array<uint8_t> extension_permutation;
// cert_compression_alg_id, for a server, contains the negotiated certificate
// compression algorithm for this client. It is only valid if
// |cert_compression_negotiated| is true.
uint16_t cert_compression_alg_id;
// ech_hpke_ctx is the HPKE context used in ECH. On the server, it is
// initialized if |ech_status| is |ssl_ech_accepted|. On the client, it is
// initialized if |selected_ech_config| is not nullptr.
ScopedEVP_HPKE_CTX ech_hpke_ctx;
// server_params, in a TLS 1.2 server, stores the ServerKeyExchange
// parameters. It has client and server randoms prepended for signing
// convenience.
Array<uint8_t> server_params;
// peer_psk_identity_hint, on the client, is the psk_identity_hint sent by the
// server when using a TLS 1.2 PSK key exchange.
UniquePtr<char> peer_psk_identity_hint;
// ca_names, on the client, contains the list of CAs received in a
// CertificateRequest message.
UniquePtr<STACK_OF(CRYPTO_BUFFER)> ca_names;
// cached_x509_ca_names contains a cache of parsed versions of the elements of
// |ca_names|. This pointer is left non-owning so only
// |ssl_crypto_x509_method| needs to link against crypto/x509.
STACK_OF(X509_NAME) *cached_x509_ca_names = nullptr;
// certificate_types, on the client, contains the set of certificate types
// received in a CertificateRequest message.
Array<uint8_t> certificate_types;
// local_pubkey is the public key we are authenticating as.
UniquePtr<EVP_PKEY> local_pubkey;
// peer_pubkey is the public key parsed from the peer's leaf certificate.
UniquePtr<EVP_PKEY> peer_pubkey;
// new_session is the new mutable session being established by the current
// handshake. It should not be cached.
UniquePtr<SSL_SESSION> new_session;
// early_session is the session corresponding to the current 0-RTT state on
// the client if |in_early_data| is true.
UniquePtr<SSL_SESSION> early_session;
// ssl_ech_keys, for servers, is the set of ECH keys to use with this
// handshake. This is copied from |SSL_CTX| to ensure consistent behavior as
// |SSL_CTX| rotates keys.
UniquePtr<SSL_ECH_KEYS> ech_keys;
// selected_ech_config, for clients, is the ECHConfig the client uses to offer
// ECH, or nullptr if ECH is not being offered. If non-NULL, |ech_hpke_ctx|
// will be initialized.
UniquePtr<ECHConfig> selected_ech_config;
// new_cipher is the cipher being negotiated in this handshake.
const SSL_CIPHER *new_cipher = nullptr;
// key_block is the record-layer key block for TLS 1.2 and earlier.
Array<uint8_t> key_block;
// hints contains the handshake hints for this connection. If
// |hints_requested| is true, this field is non-null and contains the pending
// hints to filled as the predicted handshake progresses. Otherwise, this
// field, if non-null, contains hints configured by the caller and will
// influence the handshake on match.
UniquePtr<SSL_HANDSHAKE_HINTS> hints;
// ech_is_inner, on the server, indicates whether the ClientHello contained an
// inner ECH extension.
bool ech_is_inner : 1;
// ech_authenticated_reject, on the client, indicates whether an ECH rejection
// handshake has been authenticated.
bool ech_authenticated_reject : 1;
// scts_requested is true if the SCT extension is in the ClientHello.
bool scts_requested : 1;
// handshake_finalized is true once the handshake has completed, at which
// point accessors should use the established state.
bool handshake_finalized : 1;
// accept_psk_mode stores whether the client's PSK mode is compatible with our
// preferences.
bool accept_psk_mode : 1;
// cert_request is true if a client certificate was requested.
bool cert_request : 1;
// certificate_status_expected is true if OCSP stapling was negotiated and the
// server is expected to send a CertificateStatus message. (This is used on
// both the client and server sides.)
bool certificate_status_expected : 1;
// ocsp_stapling_requested is true if a client requested OCSP stapling.
bool ocsp_stapling_requested : 1;
// delegated_credential_requested is true if the peer indicated support for
// the delegated credential extension.
bool delegated_credential_requested : 1;
// should_ack_sni is used by a server and indicates that the SNI extension
// should be echoed in the ServerHello.
bool should_ack_sni : 1;
// in_false_start is true if there is a pending client handshake in False
// Start. The client may write data at this point.
bool in_false_start : 1;
// in_early_data is true if there is a pending handshake that has progressed
// enough to send and receive early data.
bool in_early_data : 1;
// early_data_offered is true if the client sent the early_data extension.
bool early_data_offered : 1;
// can_early_read is true if application data may be read at this point in the
// handshake.
bool can_early_read : 1;
// can_early_write is true if application data may be written at this point in
// the handshake.
bool can_early_write : 1;
// next_proto_neg_seen is one of NPN was negotiated.
bool next_proto_neg_seen : 1;
// ticket_expected is true if a TLS 1.2 NewSessionTicket message is to be sent
// or received.
bool ticket_expected : 1;
// extended_master_secret is true if the extended master secret extension is
// negotiated in this handshake.
bool extended_master_secret : 1;
// pending_private_key_op is true if there is a pending private key operation
// in progress.
bool pending_private_key_op : 1;
// handback indicates that a server should pause the handshake after
// finishing operations that require private key material, in such a way that
// |SSL_get_error| returns |SSL_ERROR_HANDBACK|. It is set by
// |SSL_apply_handoff|.
bool handback : 1;
// hints_requested indicates the caller has requested handshake hints. Only
// the first round-trip of the handshake will complete, after which the
// |hints| structure can be serialized.
bool hints_requested : 1;
// cert_compression_negotiated is true iff |cert_compression_alg_id| is valid.
bool cert_compression_negotiated : 1;
// apply_jdk11_workaround is true if the peer is probably a JDK 11 client
// which implemented TLS 1.3 incorrectly.
bool apply_jdk11_workaround : 1;
// can_release_private_key is true if the private key will no longer be used
// in this handshake.
bool can_release_private_key : 1;
// channel_id_negotiated is true if Channel ID should be used in this
// handshake.
bool channel_id_negotiated : 1;
// client_version is the value sent or received in the ClientHello version.
uint16_t client_version = 0;
// early_data_read is the amount of early data that has been read by the
// record layer.
uint16_t early_data_read = 0;
// early_data_written is the amount of early data that has been written by the
// record layer.
uint16_t early_data_written = 0;
// ech_config_id is the ECH config sent by the client.
uint8_t ech_config_id = 0;
// session_id is the session ID in the ClientHello.
uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH] = {0};
uint8_t session_id_len = 0;
// grease_seed is the entropy for GREASE values.
uint8_t grease_seed[ssl_grease_last_index + 1] = {0};
};
// kMaxTickets is the maximum number of tickets to send immediately after the
// handshake. We use a one-byte ticket nonce, and there is no point in sending
// so many tickets.
constexpr size_t kMaxTickets = 16;
UniquePtr<SSL_HANDSHAKE> ssl_handshake_new(SSL *ssl);
// ssl_check_message_type checks if |msg| has type |type|. If so it returns
// one. Otherwise, it sends an alert and returns zero.
bool ssl_check_message_type(SSL *ssl, const SSLMessage &msg, int type);
// ssl_run_handshake runs the TLS handshake. It returns one on success and <= 0
// on error. It sets |out_early_return| to one if we've completed the handshake
// early.
int ssl_run_handshake(SSL_HANDSHAKE *hs, bool *out_early_return);
// The following are implementations of |do_handshake| for the client and
// server.
enum ssl_hs_wait_t ssl_client_handshake(SSL_HANDSHAKE *hs);
enum ssl_hs_wait_t ssl_server_handshake(SSL_HANDSHAKE *hs);
enum ssl_hs_wait_t tls13_client_handshake(SSL_HANDSHAKE *hs);
enum ssl_hs_wait_t tls13_server_handshake(SSL_HANDSHAKE *hs);
// The following functions return human-readable representations of the TLS
// handshake states for debugging.
const char *ssl_client_handshake_state(SSL_HANDSHAKE *hs);
const char *ssl_server_handshake_state(SSL_HANDSHAKE *hs);
const char *tls13_client_handshake_state(SSL_HANDSHAKE *hs);
const char *tls13_server_handshake_state(SSL_HANDSHAKE *hs);
// tls13_add_key_update queues a KeyUpdate message on |ssl|. The
// |update_requested| argument must be one of |SSL_KEY_UPDATE_REQUESTED| or
// |SSL_KEY_UPDATE_NOT_REQUESTED|.
bool tls13_add_key_update(SSL *ssl, int update_requested);
// tls13_post_handshake processes a post-handshake message. It returns true on
// success and false on failure.
bool tls13_post_handshake(SSL *ssl, const SSLMessage &msg);
bool tls13_process_certificate(SSL_HANDSHAKE *hs, const SSLMessage &msg,
bool allow_anonymous);
bool tls13_process_certificate_verify(SSL_HANDSHAKE *hs, const SSLMessage &msg);
// tls13_process_finished processes |msg| as a Finished message from the
// peer. If |use_saved_value| is true, the verify_data is compared against
// |hs->expected_client_finished| rather than computed fresh.
bool tls13_process_finished(SSL_HANDSHAKE *hs, const SSLMessage &msg,
bool use_saved_value);
bool tls13_add_certificate(SSL_HANDSHAKE *hs);
// tls13_add_certificate_verify adds a TLS 1.3 CertificateVerify message to the
// handshake. If it returns |ssl_private_key_retry|, it should be called again
// to retry when the signing operation is completed.
enum ssl_private_key_result_t tls13_add_certificate_verify(SSL_HANDSHAKE *hs);
bool tls13_add_finished(SSL_HANDSHAKE *hs);
bool tls13_process_new_session_ticket(SSL *ssl, const SSLMessage &msg);
bssl::UniquePtr<SSL_SESSION> tls13_create_session_with_ticket(SSL *ssl,
CBS *body);
// ssl_setup_extension_permutation computes a ClientHello extension permutation
// for |hs|, if applicable. It returns true on success and false on error.
bool ssl_setup_extension_permutation(SSL_HANDSHAKE *hs);
// ssl_setup_key_shares computes client key shares and saves them in |hs|. It
// returns true on success and false on failure. If |override_group_id| is zero,
// it offers the default groups, including GREASE. If it is non-zero, it offers
// a single key share of the specified group.
bool ssl_setup_key_shares(SSL_HANDSHAKE *hs, uint16_t override_group_id);
bool ssl_ext_key_share_parse_serverhello(SSL_HANDSHAKE *hs,
Array<uint8_t> *out_secret,
uint8_t *out_alert, CBS *contents);
bool ssl_ext_key_share_parse_clienthello(SSL_HANDSHAKE *hs, bool *out_found,
Span<const uint8_t> *out_peer_key,
uint8_t *out_alert,
const SSL_CLIENT_HELLO *client_hello);
bool ssl_ext_key_share_add_serverhello(SSL_HANDSHAKE *hs, CBB *out);
bool ssl_ext_pre_shared_key_parse_serverhello(SSL_HANDSHAKE *hs,
uint8_t *out_alert,
CBS *contents);
bool ssl_ext_pre_shared_key_parse_clienthello(
SSL_HANDSHAKE *hs, CBS *out_ticket, CBS *out_binders,
uint32_t *out_obfuscated_ticket_age, uint8_t *out_alert,
const SSL_CLIENT_HELLO *client_hello, CBS *contents);
bool ssl_ext_pre_shared_key_add_serverhello(SSL_HANDSHAKE *hs, CBB *out);
// ssl_is_sct_list_valid does a shallow parse of the SCT list in |contents| and
// returns whether it's valid.
bool ssl_is_sct_list_valid(const CBS *contents);
// ssl_write_client_hello_without_extensions writes a ClientHello to |out|,
// up to the extensions field. |type| determines the type of ClientHello to
// write. If |omit_session_id| is true, the session ID is empty.
bool ssl_write_client_hello_without_extensions(const SSL_HANDSHAKE *hs,
CBB *cbb,
ssl_client_hello_type_t type,
bool empty_session_id);
// ssl_add_client_hello constructs a ClientHello and adds it to the outgoing
// flight. It returns true on success and false on error.
bool ssl_add_client_hello(SSL_HANDSHAKE *hs);
struct ParsedServerHello {
CBS raw;
uint16_t legacy_version = 0;
CBS random;
CBS session_id;
uint16_t cipher_suite = 0;
uint8_t compression_method = 0;
CBS extensions;
};
// ssl_parse_server_hello parses |msg| as a ServerHello. On success, it writes
// the result to |*out| and returns true. Otherwise, it returns false and sets
// |*out_alert| to an alert to send to the peer.
bool ssl_parse_server_hello(ParsedServerHello *out, uint8_t *out_alert,
const SSLMessage &msg);
enum ssl_cert_verify_context_t {
ssl_cert_verify_server,
ssl_cert_verify_client,
ssl_cert_verify_channel_id,
};
// tls13_get_cert_verify_signature_input generates the message to be signed for
// TLS 1.3's CertificateVerify message. |cert_verify_context| determines the
// type of signature. It sets |*out| to a newly allocated buffer containing the
// result. This function returns true on success and false on failure.
bool tls13_get_cert_verify_signature_input(
SSL_HANDSHAKE *hs, Array<uint8_t> *out,
enum ssl_cert_verify_context_t cert_verify_context);
// ssl_is_valid_alpn_list returns whether |in| is a valid ALPN protocol list.
bool ssl_is_valid_alpn_list(Span<const uint8_t> in);
// ssl_is_alpn_protocol_allowed returns whether |protocol| is a valid server
// selection for |hs->ssl|'s client preferences.
bool ssl_is_alpn_protocol_allowed(const SSL_HANDSHAKE *hs,
Span<const uint8_t> protocol);
// ssl_negotiate_alpn negotiates the ALPN extension, if applicable. It returns
// true on successful negotiation or if nothing was negotiated. It returns false
// and sets |*out_alert| to an alert on error.
bool ssl_negotiate_alpn(SSL_HANDSHAKE *hs, uint8_t *out_alert,
const SSL_CLIENT_HELLO *client_hello);
// ssl_get_local_application_settings looks up the configured ALPS value for
// |protocol|. If found, it sets |*out_settings| to the value and returns true.
// Otherwise, it returns false.
bool ssl_get_local_application_settings(const SSL_HANDSHAKE *hs,
Span<const uint8_t> *out_settings,
Span<const uint8_t> protocol);
// ssl_negotiate_alps negotiates the ALPS extension, if applicable. It returns
// true on successful negotiation or if nothing was negotiated. It returns false
// and sets |*out_alert| to an alert on error.
bool ssl_negotiate_alps(SSL_HANDSHAKE *hs, uint8_t *out_alert,
const SSL_CLIENT_HELLO *client_hello);
struct SSLExtension {
SSLExtension(uint16_t type_arg, bool allowed_arg = true)
: type(type_arg), allowed(allowed_arg), present(false) {
CBS_init(&data, nullptr, 0);
}
uint16_t type;
bool allowed;
bool present;
CBS data;
};
// ssl_parse_extensions parses a TLS extensions block out of |cbs| and advances
// it. It writes the parsed extensions to pointers in |extensions|. On success,
// it fills in the |present| and |data| fields and returns true. Otherwise, it
// sets |*out_alert| to an alert to send and returns false. Unknown extensions
// are rejected unless |ignore_unknown| is true.
bool ssl_parse_extensions(const CBS *cbs, uint8_t *out_alert,
std::initializer_list<SSLExtension *> extensions,
bool ignore_unknown);
// ssl_verify_peer_cert verifies the peer certificate for |hs|.
enum ssl_verify_result_t ssl_verify_peer_cert(SSL_HANDSHAKE *hs);
// ssl_reverify_peer_cert verifies the peer certificate for |hs| when resuming a
// session.
enum ssl_verify_result_t ssl_reverify_peer_cert(SSL_HANDSHAKE *hs,
bool send_alert);
enum ssl_hs_wait_t ssl_get_finished(SSL_HANDSHAKE *hs);
bool ssl_send_finished(SSL_HANDSHAKE *hs);
bool ssl_output_cert_chain(SSL_HANDSHAKE *hs);
// ssl_handshake_session returns the |SSL_SESSION| corresponding to the current
// handshake. Note, in TLS 1.2 resumptions, this session is immutable.
const SSL_SESSION *ssl_handshake_session(const SSL_HANDSHAKE *hs);
// ssl_done_writing_client_hello is called after the last ClientHello is written
// by |hs|. It releases some memory that is no longer needed.
void ssl_done_writing_client_hello(SSL_HANDSHAKE *hs);
// SSLKEYLOGFILE functions.
// ssl_log_secret logs |secret| with label |label|, if logging is enabled for
// |ssl|. It returns true on success and false on failure.
bool ssl_log_secret(const SSL *ssl, const char *label,
Span<const uint8_t> secret);
// ClientHello functions.
// ssl_client_hello_init parses |body| as a ClientHello message, excluding the
// message header, and writes the result to |*out|. It returns true on success
// and false on error. This function is exported for testing.
OPENSSL_EXPORT bool ssl_client_hello_init(const SSL *ssl, SSL_CLIENT_HELLO *out,
Span<const uint8_t> body);
bool ssl_parse_client_hello_with_trailing_data(const SSL *ssl, CBS *cbs,
SSL_CLIENT_HELLO *out);
bool ssl_client_hello_get_extension(const SSL_CLIENT_HELLO *client_hello,
CBS *out, uint16_t extension_type);
bool ssl_client_cipher_list_contains_cipher(
const SSL_CLIENT_HELLO *client_hello, uint16_t id);
// GREASE.
// ssl_get_grease_value returns a GREASE value for |hs|. For a given
// connection, the values for each index will be deterministic. This allows the
// same ClientHello be sent twice for a HelloRetryRequest or the same group be
// advertised in both supported_groups and key_shares.
uint16_t ssl_get_grease_value(const SSL_HANDSHAKE *hs,
enum ssl_grease_index_t index);
// Signature algorithms.
// tls1_parse_peer_sigalgs parses |sigalgs| as the list of peer signature
// algorithms and saves them on |hs|. It returns true on success and false on
// error.
bool tls1_parse_peer_sigalgs(SSL_HANDSHAKE *hs, const CBS *sigalgs);
// tls1_get_legacy_signature_algorithm sets |*out| to the signature algorithm
// that should be used with |pkey| in TLS 1.1 and earlier. It returns true on
// success and false if |pkey| may not be used at those versions.
bool tls1_get_legacy_signature_algorithm(uint16_t *out, const EVP_PKEY *pkey);
// tls1_choose_signature_algorithm sets |*out| to a signature algorithm for use
// with |hs|'s private key based on the peer's preferences and the algorithms
// supported. It returns true on success and false on error.
bool tls1_choose_signature_algorithm(SSL_HANDSHAKE *hs, uint16_t *out);
// tls1_get_peer_verify_algorithms returns the signature schemes for which the
// peer indicated support.
//
// NOTE: The related function |SSL_get0_peer_verify_algorithms| only has
// well-defined behavior during the callbacks set by |SSL_CTX_set_cert_cb| and
// |SSL_CTX_set_client_cert_cb|, or when the handshake is paused because of
// them.
Span<const uint16_t> tls1_get_peer_verify_algorithms(const SSL_HANDSHAKE *hs);
// tls12_add_verify_sigalgs adds the signature algorithms acceptable for the
// peer signature to |out|. It returns true on success and false on error.
bool tls12_add_verify_sigalgs(const SSL_HANDSHAKE *hs, CBB *out);
// tls12_check_peer_sigalg checks if |sigalg| is acceptable for the peer
// signature. It returns true on success and false on error, setting
// |*out_alert| to an alert to send.
bool tls12_check_peer_sigalg(const SSL_HANDSHAKE *hs, uint8_t *out_alert,
uint16_t sigalg);
// Underdocumented functions.
//
// Functions below here haven't been touched up and may be underdocumented.
#define TLSEXT_CHANNEL_ID_SIZE 128
// From RFC 4492, used in encoding the curve type in ECParameters
#define NAMED_CURVE_TYPE 3
struct CERT {
static constexpr bool kAllowUniquePtr = true;
explicit CERT(const SSL_X509_METHOD *x509_method);
~CERT();
UniquePtr<EVP_PKEY> privatekey;
// chain contains the certificate chain, with the leaf at the beginning. The
// first element of |chain| may be NULL to indicate that the leaf certificate
// has not yet been set.
// If |chain| != NULL -> len(chain) >= 1
// If |chain[0]| == NULL -> len(chain) >= 2.
// |chain[1..]| != NULL
UniquePtr<STACK_OF(CRYPTO_BUFFER)> chain;
// x509_chain may contain a parsed copy of |chain[1..]|. This is only used as
// a cache in order to implement “get0” functions that return a non-owning
// pointer to the certificate chain.
STACK_OF(X509) *x509_chain = nullptr;
// x509_leaf may contain a parsed copy of the first element of |chain|. This
// is only used as a cache in order to implement “get0” functions that return
// a non-owning pointer to the certificate chain.
X509 *x509_leaf = nullptr;
// x509_stash contains the last |X509| object append to the chain. This is a
// workaround for some third-party code that continue to use an |X509| object
// even after passing ownership with an “add0” function.
X509 *x509_stash = nullptr;
// key_method, if non-NULL, is a set of callbacks to call for private key
// operations.
const SSL_PRIVATE_KEY_METHOD *key_method = nullptr;
// x509_method contains pointers to functions that might deal with |X509|
// compatibility, or might be a no-op, depending on the application.
const SSL_X509_METHOD *x509_method = nullptr;
// sigalgs, if non-empty, is the set of signature algorithms supported by
// |privatekey| in decreasing order of preference.
Array<uint16_t> sigalgs;
// Certificate setup callback: if set is called whenever a
// certificate may be required (client or server). the callback
// can then examine any appropriate parameters and setup any
// certificates required. This allows advanced applications
// to select certificates on the fly: for example based on
// supported signature algorithms or curves.
int (*cert_cb)(SSL *ssl, void *arg) = nullptr;
void *cert_cb_arg = nullptr;
// Optional X509_STORE for certificate validation. If NULL the parent SSL_CTX
// store is used instead.
X509_STORE *verify_store = nullptr;
// Signed certificate timestamp list to be sent to the client, if requested
UniquePtr<CRYPTO_BUFFER> signed_cert_timestamp_list;
// OCSP response to be sent to the client, if requested.
UniquePtr<CRYPTO_BUFFER> ocsp_response;
// sid_ctx partitions the session space within a shared session cache or
// ticket key. Only sessions with a matching value will be accepted.
uint8_t sid_ctx_length = 0;
uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH] = {0};
// Delegated credentials.
// dc is the delegated credential to send to the peer (if requested).
UniquePtr<DC> dc = nullptr;
// dc_privatekey is used instead of |privatekey| or |key_method| to
// authenticate the host if a delegated credential is used in the handshake.
UniquePtr<EVP_PKEY> dc_privatekey = nullptr;
// dc_key_method, if not NULL, is used instead of |dc_privatekey| to
// authenticate the host.
const SSL_PRIVATE_KEY_METHOD *dc_key_method = nullptr;
};
// |SSL_PROTOCOL_METHOD| abstracts between TLS and DTLS.
struct SSL_PROTOCOL_METHOD {
bool is_dtls;
bool (*ssl_new)(SSL *ssl);
void (*ssl_free)(SSL *ssl);
// get_message sets |*out| to the current handshake message and returns true
// if one has been received. It returns false if more input is needed.
bool (*get_message)(const SSL *ssl, SSLMessage *out);
// next_message is called to release the current handshake message.
void (*next_message)(SSL *ssl);
// has_unprocessed_handshake_data returns whether there is buffered
// handshake data that has not been consumed by |get_message|.
bool (*has_unprocessed_handshake_data)(const SSL *ssl);
// Use the |ssl_open_handshake| wrapper.
ssl_open_record_t (*open_handshake)(SSL *ssl, size_t *out_consumed,
uint8_t *out_alert, Span<uint8_t> in);
// Use the |ssl_open_change_cipher_spec| wrapper.
ssl_open_record_t (*open_change_cipher_spec)(SSL *ssl, size_t *out_consumed,
uint8_t *out_alert,
Span<uint8_t> in);
// Use the |ssl_open_app_data| wrapper.
ssl_open_record_t (*open_app_data)(SSL *ssl, Span<uint8_t> *out,
size_t *out_consumed, uint8_t *out_alert,
Span<uint8_t> in);
// write_app_data encrypts and writes |in| as application data. On success, it
// returns one and sets |*out_bytes_written| to the number of bytes of |in|
// written. Otherwise, it returns <= 0 and sets |*out_needs_handshake| to
// whether the operation failed because the caller needs to drive the
// handshake.
int (*write_app_data)(SSL *ssl, bool *out_needs_handshake,
size_t *out_bytes_written, Span<const uint8_t> in);
int (*dispatch_alert)(SSL *ssl);
// init_message begins a new handshake message of type |type|. |cbb| is the
// root CBB to be passed into |finish_message|. |*body| is set to a child CBB
// the caller should write to. It returns true on success and false on error.
bool (*init_message)(const SSL *ssl, CBB *cbb, CBB *body, uint8_t type);
// finish_message finishes a handshake message. It sets |*out_msg| to the
// serialized message. It returns true on success and false on error.
bool (*finish_message)(const SSL *ssl, CBB *cbb,
bssl::Array<uint8_t> *out_msg);
// add_message adds a handshake message to the pending flight. It returns
// true on success and false on error.
bool (*add_message)(SSL *ssl, bssl::Array<uint8_t> msg);
// add_change_cipher_spec adds a ChangeCipherSpec record to the pending
// flight. It returns true on success and false on error.
bool (*add_change_cipher_spec)(SSL *ssl);
// flush_flight flushes the pending flight to the transport. It returns one on
// success and <= 0 on error.
int (*flush_flight)(SSL *ssl);
// on_handshake_complete is called when the handshake is complete.
void (*on_handshake_complete)(SSL *ssl);
// set_read_state sets |ssl|'s read cipher state and level to |aead_ctx| and
// |level|. In QUIC, |aead_ctx| is a placeholder object and |secret_for_quic|
// is the original secret. This function returns true on success and false on
// error.
bool (*set_read_state)(SSL *ssl, ssl_encryption_level_t level,
UniquePtr<SSLAEADContext> aead_ctx,
Span<const uint8_t> secret_for_quic);
// set_write_state sets |ssl|'s write cipher state and level to |aead_ctx| and
// |level|. In QUIC, |aead_ctx| is a placeholder object and |secret_for_quic|
// is the original secret. This function returns true on success and false on
// error.
bool (*set_write_state)(SSL *ssl, ssl_encryption_level_t level,
UniquePtr<SSLAEADContext> aead_ctx,
Span<const uint8_t> secret_for_quic);
};
// The following wrappers call |open_*| but handle |read_shutdown| correctly.
// ssl_open_handshake processes a record from |in| for reading a handshake
// message.
ssl_open_record_t ssl_open_handshake(SSL *ssl, size_t *out_consumed,
uint8_t *out_alert, Span<uint8_t> in);
// ssl_open_change_cipher_spec processes a record from |in| for reading a
// ChangeCipherSpec.
ssl_open_record_t ssl_open_change_cipher_spec(SSL *ssl, size_t *out_consumed,
uint8_t *out_alert,
Span<uint8_t> in);
// ssl_open_app_data processes a record from |in| for reading application data.
// On success, it returns |ssl_open_record_success| and sets |*out| to the
// input. If it encounters a post-handshake message, it returns
// |ssl_open_record_discard|. The caller should then retry, after processing any
// messages received with |get_message|.
ssl_open_record_t ssl_open_app_data(SSL *ssl, Span<uint8_t> *out,
size_t *out_consumed, uint8_t *out_alert,
Span<uint8_t> in);
struct SSL_X509_METHOD {
// check_client_CA_list returns one if |names| is a good list of X.509
// distinguished names and zero otherwise. This is used to ensure that we can
// reject unparsable values at handshake time when using crypto/x509.
bool (*check_client_CA_list)(STACK_OF(CRYPTO_BUFFER) *names);
// cert_clear frees and NULLs all X509 certificate-related state.
void (*cert_clear)(CERT *cert);
// cert_free frees all X509-related state.
void (*cert_free)(CERT *cert);
// cert_flush_cached_chain drops any cached |X509|-based certificate chain
// from |cert|.
// cert_dup duplicates any needed fields from |cert| to |new_cert|.
void (*cert_dup)(CERT *new_cert, const CERT *cert);
void (*cert_flush_cached_chain)(CERT *cert);
// cert_flush_cached_chain drops any cached |X509|-based leaf certificate
// from |cert|.
void (*cert_flush_cached_leaf)(CERT *cert);
// session_cache_objects fills out |sess->x509_peer| and |sess->x509_chain|
// from |sess->certs| and erases |sess->x509_chain_without_leaf|. It returns
// true on success or false on error.
bool (*session_cache_objects)(SSL_SESSION *session);
// session_dup duplicates any needed fields from |session| to |new_session|.
// It returns true on success or false on error.
bool (*session_dup)(SSL_SESSION *new_session, const SSL_SESSION *session);
// session_clear frees any X509-related state from |session|.
void (*session_clear)(SSL_SESSION *session);
// session_verify_cert_chain verifies the certificate chain in |session|,
// sets |session->verify_result| and returns true on success or false on
// error.
bool (*session_verify_cert_chain)(SSL_SESSION *session, SSL_HANDSHAKE *ssl,
uint8_t *out_alert);
// hs_flush_cached_ca_names drops any cached |X509_NAME|s from |hs|.
void (*hs_flush_cached_ca_names)(SSL_HANDSHAKE *hs);
// ssl_new does any necessary initialisation of |hs|. It returns true on
// success or false on error.
bool (*ssl_new)(SSL_HANDSHAKE *hs);
// ssl_free frees anything created by |ssl_new|.
void (*ssl_config_free)(SSL_CONFIG *cfg);
// ssl_flush_cached_client_CA drops any cached |X509_NAME|s from |ssl|.
void (*ssl_flush_cached_client_CA)(SSL_CONFIG *cfg);
// ssl_auto_chain_if_needed runs the deprecated auto-chaining logic if
// necessary. On success, it updates |ssl|'s certificate configuration as
// needed and returns true. Otherwise, it returns false.
bool (*ssl_auto_chain_if_needed)(SSL_HANDSHAKE *hs);
// ssl_ctx_new does any necessary initialisation of |ctx|. It returns true on
// success or false on error.
bool (*ssl_ctx_new)(SSL_CTX *ctx);
// ssl_ctx_free frees anything created by |ssl_ctx_new|.
void (*ssl_ctx_free)(SSL_CTX *ctx);
// ssl_ctx_flush_cached_client_CA drops any cached |X509_NAME|s from |ctx|.
void (*ssl_ctx_flush_cached_client_CA)(SSL_CTX *ssl);
};
// ssl_crypto_x509_method provides the |SSL_X509_METHOD| functions using
// crypto/x509.
extern const SSL_X509_METHOD ssl_crypto_x509_method;
// ssl_noop_x509_method provides the |SSL_X509_METHOD| functions that avoid
// crypto/x509.
extern const SSL_X509_METHOD ssl_noop_x509_method;
struct TicketKey {
static constexpr bool kAllowUniquePtr = true;
uint8_t name[SSL_TICKET_KEY_NAME_LEN] = {0};
uint8_t hmac_key[16] = {0};
uint8_t aes_key[16] = {0};
// next_rotation_tv_sec is the time (in seconds from the epoch) when the
// current key should be superseded by a new key, or the time when a previous
// key should be dropped. If zero, then the key should not be automatically
// rotated.
uint64_t next_rotation_tv_sec = 0;
};
struct CertCompressionAlg {
static constexpr bool kAllowUniquePtr = true;
ssl_cert_compression_func_t compress = nullptr;
ssl_cert_decompression_func_t decompress = nullptr;
uint16_t alg_id = 0;
};
BSSL_NAMESPACE_END
DEFINE_LHASH_OF(SSL_SESSION)
BSSL_NAMESPACE_BEGIN
// An ssl_shutdown_t describes the shutdown state of one end of the connection,
// whether it is alive or has been shutdown via close_notify or fatal alert.
enum ssl_shutdown_t {
ssl_shutdown_none = 0,
ssl_shutdown_close_notify = 1,
ssl_shutdown_error = 2,
};
enum ssl_ech_status_t {
// ssl_ech_none indicates ECH was not offered, or we have not gotten far
// enough in the handshake to determine the status.
ssl_ech_none,
// ssl_ech_accepted indicates the server accepted ECH.
ssl_ech_accepted,
// ssl_ech_rejected indicates the server was offered ECH but rejected it.
ssl_ech_rejected,
};
struct SSL3_STATE {
static constexpr bool kAllowUniquePtr = true;
SSL3_STATE();
~SSL3_STATE();
uint64_t read_sequence = 0;
uint64_t write_sequence = 0;
uint8_t server_random[SSL3_RANDOM_SIZE] = {0};
uint8_t client_random[SSL3_RANDOM_SIZE] = {0};
// read_buffer holds data from the transport to be processed.
SSLBuffer read_buffer;
// write_buffer holds data to be written to the transport.
SSLBuffer write_buffer;
// pending_app_data is the unconsumed application data. It points into
// |read_buffer|.
Span<uint8_t> pending_app_data;
// unreported_bytes_written is the number of bytes successfully written to the
// transport, but not yet reported to the caller. The next |SSL_write| will
// skip this many bytes from the input. This is used if
// |SSL_MODE_ENABLE_PARTIAL_WRITE| is disabled, in which case |SSL_write| only
// reports bytes written when the full caller input is written.
size_t unreported_bytes_written = 0;
// pending_write, if |has_pending_write| is true, is the caller-supplied data
// corresponding to the current pending write. This is used to check the
// caller retried with a compatible buffer.
Span<const uint8_t> pending_write;
// pending_write_type, if |has_pending_write| is true, is the record type
// for the current pending write.
//
// TODO(davidben): Remove this when alerts are moved out of this write path.
uint8_t pending_write_type = 0;
// read_shutdown is the shutdown state for the read half of the connection.
enum ssl_shutdown_t read_shutdown = ssl_shutdown_none;
// write_shutdown is the shutdown state for the write half of the connection.
enum ssl_shutdown_t write_shutdown = ssl_shutdown_none;
// read_error, if |read_shutdown| is |ssl_shutdown_error|, is the error for
// the receive half of the connection.
UniquePtr<ERR_SAVE_STATE> read_error;
int total_renegotiations = 0;
// This holds a variable that indicates what we were doing when a 0 or -1 is
// returned. This is needed for non-blocking IO so we know what request
// needs re-doing when in SSL_accept or SSL_connect
int rwstate = SSL_ERROR_NONE;
enum ssl_encryption_level_t read_level = ssl_encryption_initial;
enum ssl_encryption_level_t write_level = ssl_encryption_initial;
// early_data_skipped is the amount of early data that has been skipped by the
// record layer.
uint16_t early_data_skipped = 0;
// empty_record_count is the number of consecutive empty records received.
uint8_t empty_record_count = 0;
// warning_alert_count is the number of consecutive warning alerts
// received.
uint8_t warning_alert_count = 0;
// key_update_count is the number of consecutive KeyUpdates received.
uint8_t key_update_count = 0;
// ech_status indicates whether ECH was accepted by the server.
ssl_ech_status_t ech_status = ssl_ech_none;
// skip_early_data instructs the record layer to skip unexpected early data
// messages when 0RTT is rejected.
bool skip_early_data : 1;
// have_version is true if the connection's final version is known. Otherwise
// the version has not been negotiated yet.
bool have_version : 1;
// v2_hello_done is true if the peer's V2ClientHello, if any, has been handled
// and future messages should use the record layer.
bool v2_hello_done : 1;
// is_v2_hello is true if the current handshake message was derived from a
// V2ClientHello rather than received from the peer directly.
bool is_v2_hello : 1;
// has_message is true if the current handshake message has been returned
// at least once by |get_message| and false otherwise.
bool has_message : 1;
// initial_handshake_complete is true if the initial handshake has
// completed.
bool initial_handshake_complete : 1;
// session_reused indicates whether a session was resumed.
bool session_reused : 1;
// delegated_credential_used is whether we presented a delegated credential to
// the peer.
bool delegated_credential_used : 1;
bool send_connection_binding : 1;
// channel_id_valid is true if, on the server, the client has negotiated a
// Channel ID and the |channel_id| field is filled in.
bool channel_id_valid : 1;
// key_update_pending is true if we have a KeyUpdate acknowledgment
// outstanding.
bool key_update_pending : 1;
// early_data_accepted is true if early data was accepted by the server.
bool early_data_accepted : 1;
// alert_dispatch is true there is an alert in |send_alert| to be sent.
bool alert_dispatch : 1;
// renegotiate_pending is whether the read half of the channel is blocked on a
// HelloRequest.
bool renegotiate_pending : 1;
// used_hello_retry_request is whether the handshake used a TLS 1.3
// HelloRetryRequest message.
bool used_hello_retry_request : 1;
// was_key_usage_invalid is whether the handshake succeeded despite using a
// TLS mode which was incompatible with the leaf certificate's keyUsage
// extension.
bool was_key_usage_invalid : 1;
// hs_buf is the buffer of handshake data to process.
UniquePtr<BUF_MEM> hs_buf;
// pending_hs_data contains the pending handshake data that has not yet
// been encrypted to |pending_flight|. This allows packing the handshake into
// fewer records.
UniquePtr<BUF_MEM> pending_hs_data;
// pending_flight is the pending outgoing flight. This is used to flush each
// handshake flight in a single write. |write_buffer| must be written out
// before this data.
UniquePtr<BUF_MEM> pending_flight;
// pending_flight_offset is the number of bytes of |pending_flight| which have
// been successfully written.
uint32_t pending_flight_offset = 0;
// ticket_age_skew is the difference, in seconds, between the client-sent
// ticket age and the server-computed value in TLS 1.3 server connections
// which resumed a session.
int32_t ticket_age_skew = 0;
// ssl_early_data_reason stores details on why 0-RTT was accepted or rejected.
enum ssl_early_data_reason_t early_data_reason = ssl_early_data_unknown;
// aead_read_ctx is the current read cipher state.
UniquePtr<SSLAEADContext> aead_read_ctx;
// aead_write_ctx is the current write cipher state.
UniquePtr<SSLAEADContext> aead_write_ctx;
// hs is the handshake state for the current handshake or NULL if there isn't
// one.
UniquePtr<SSL_HANDSHAKE> hs;
uint8_t write_traffic_secret[SSL_MAX_MD_SIZE] = {0};
uint8_t read_traffic_secret[SSL_MAX_MD_SIZE] = {0};
uint8_t exporter_secret[SSL_MAX_MD_SIZE] = {0};
uint8_t write_traffic_secret_len = 0;
uint8_t read_traffic_secret_len = 0;
uint8_t exporter_secret_len = 0;
// Connection binding to prevent renegotiation attacks
uint8_t previous_client_finished[12] = {0};
uint8_t previous_client_finished_len = 0;
uint8_t previous_server_finished_len = 0;
uint8_t previous_server_finished[12] = {0};
uint8_t send_alert[2] = {0};
// established_session is the session established by the connection. This
// session is only filled upon the completion of the handshake and is
// immutable.
UniquePtr<SSL_SESSION> established_session;
// Next protocol negotiation. For the client, this is the protocol that we
// sent in NextProtocol and is set when handling ServerHello extensions.
//
// For a server, this is the client's selected_protocol from NextProtocol and
// is set when handling the NextProtocol message, before the Finished
// message.
Array<uint8_t> next_proto_negotiated;
// ALPN information
// (we are in the process of transitioning from NPN to ALPN.)
// In a server these point to the selected ALPN protocol after the
// ClientHello has been processed. In a client these contain the protocol
// that the server selected once the ServerHello has been processed.
Array<uint8_t> alpn_selected;
// hostname, on the server, is the value of the SNI extension.
UniquePtr<char> hostname;
// For a server:
// If |channel_id_valid| is true, then this contains the
// verified Channel ID from the client: a P256 point, (x,y), where
// each are big-endian values.
uint8_t channel_id[64] = {0};
// Contains the QUIC transport params received by the peer.
Array<uint8_t> peer_quic_transport_params;
// srtp_profile is the selected SRTP protection profile for
// DTLS-SRTP.
const SRTP_PROTECTION_PROFILE *srtp_profile = nullptr;
};
// lengths of messages
#define DTLS1_RT_HEADER_LENGTH 13
#define DTLS1_HM_HEADER_LENGTH 12
#define DTLS1_CCS_HEADER_LENGTH 1
#define DTLS1_AL_HEADER_LENGTH 2
struct hm_header_st {
uint8_t type;
uint32_t msg_len;
uint16_t seq;
uint32_t frag_off;
uint32_t frag_len;
};
// An hm_fragment is an incoming DTLS message, possibly not yet assembled.
struct hm_fragment {
static constexpr bool kAllowUniquePtr = true;
hm_fragment() {}
hm_fragment(const hm_fragment &) = delete;
hm_fragment &operator=(const hm_fragment &) = delete;
~hm_fragment();
// type is the type of the message.
uint8_t type = 0;
// seq is the sequence number of this message.
uint16_t seq = 0;
// msg_len is the length of the message body.
uint32_t msg_len = 0;
// data is a pointer to the message, including message header. It has length
// |DTLS1_HM_HEADER_LENGTH| + |msg_len|.
uint8_t *data = nullptr;
// reassembly is a bitmask of |msg_len| bits corresponding to which parts of
// the message have been received. It is NULL if the message is complete.
uint8_t *reassembly = nullptr;
};
struct OPENSSL_timeval {
uint64_t tv_sec;
uint32_t tv_usec;
};
struct DTLS1_STATE {
static constexpr bool kAllowUniquePtr = true;
DTLS1_STATE();
~DTLS1_STATE();
// has_change_cipher_spec is true if we have received a ChangeCipherSpec from
// the peer in this epoch.
bool has_change_cipher_spec : 1;
// outgoing_messages_complete is true if |outgoing_messages| has been
// completed by an attempt to flush it. Future calls to |add_message| and
// |add_change_cipher_spec| will start a new flight.
bool outgoing_messages_complete : 1;
// flight_has_reply is true if the current outgoing flight is complete and has
// processed at least one message. This is used to detect whether we or the
// peer sent the final flight.
bool flight_has_reply : 1;
// The current data and handshake epoch. This is initially undefined, and
// starts at zero once the initial handshake is completed.
uint16_t r_epoch = 0;
uint16_t w_epoch = 0;
// records being received in the current epoch
DTLS1_BITMAP bitmap;
uint16_t handshake_write_seq = 0;
uint16_t handshake_read_seq = 0;
// save last sequence number for retransmissions
uint64_t last_write_sequence = 0;
UniquePtr<SSLAEADContext> last_aead_write_ctx;
// incoming_messages is a ring buffer of incoming handshake messages that have
// yet to be processed. The front of the ring buffer is message number
// |handshake_read_seq|, at position |handshake_read_seq| %
// |SSL_MAX_HANDSHAKE_FLIGHT|.
UniquePtr<hm_fragment> incoming_messages[SSL_MAX_HANDSHAKE_FLIGHT];
// outgoing_messages is the queue of outgoing messages from the last handshake
// flight.
DTLS_OUTGOING_MESSAGE outgoing_messages[SSL_MAX_HANDSHAKE_FLIGHT];
uint8_t outgoing_messages_len = 0;
// outgoing_written is the number of outgoing messages that have been
// written.
uint8_t outgoing_written = 0;
// outgoing_offset is the number of bytes of the next outgoing message have
// been written.
uint32_t outgoing_offset = 0;
unsigned mtu = 0; // max DTLS packet size
// num_timeouts is the number of times the retransmit timer has fired since
// the last time it was reset.
unsigned num_timeouts = 0;
// Indicates when the last handshake msg or heartbeat sent will
// timeout.
struct OPENSSL_timeval next_timeout = {0, 0};
// timeout_duration_ms is the timeout duration in milliseconds.
unsigned timeout_duration_ms = 0;
};
// An ALPSConfig is a pair of ALPN protocol and settings value to use with ALPS.
struct ALPSConfig {
Array<uint8_t> protocol;
Array<uint8_t> settings;
};
// SSL_CONFIG contains configuration bits that can be shed after the handshake
// completes. Objects of this type are not shared; they are unique to a
// particular |SSL|.
//
// See SSL_shed_handshake_config() for more about the conditions under which
// configuration can be shed.
struct SSL_CONFIG {
static constexpr bool kAllowUniquePtr = true;
explicit SSL_CONFIG(SSL *ssl_arg);
~SSL_CONFIG();
// ssl is a non-owning pointer to the parent |SSL| object.
SSL *const ssl = nullptr;
// conf_max_version is the maximum acceptable version configured by
// |SSL_set_max_proto_version|. Note this version is not normalized in DTLS
// and is further constrained by |SSL_OP_NO_*|.
uint16_t conf_max_version = 0;
// conf_min_version is the minimum acceptable version configured by
// |SSL_set_min_proto_version|. Note this version is not normalized in DTLS
// and is further constrained by |SSL_OP_NO_*|.
uint16_t conf_min_version = 0;
X509_VERIFY_PARAM *param = nullptr;
// crypto
UniquePtr<SSLCipherPreferenceList> cipher_list;
// This is used to hold the local certificate used (i.e. the server
// certificate for a server or the client certificate for a client).
UniquePtr<CERT> cert;
int (*verify_callback)(int ok,
X509_STORE_CTX *ctx) =
nullptr; // fail if callback returns 0
enum ssl_verify_result_t (*custom_verify_callback)(
SSL *ssl, uint8_t *out_alert) = nullptr;
// Server-only: psk_identity_hint is the identity hint to send in
// PSK-based key exchanges.
UniquePtr<char> psk_identity_hint;
unsigned (*psk_client_callback)(SSL *ssl, const char *hint, char *identity,
unsigned max_identity_len, uint8_t *psk,
unsigned max_psk_len) = nullptr;
unsigned (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk,
unsigned max_psk_len) = nullptr;
// for server side, keep the list of CA_dn we can use
UniquePtr<STACK_OF(CRYPTO_BUFFER)> client_CA;
// cached_x509_client_CA is a cache of parsed versions of the elements of
// |client_CA|.
STACK_OF(X509_NAME) *cached_x509_client_CA = nullptr;
Array<uint16_t> supported_group_list; // our list
// channel_id_private is the client's Channel ID private key, or null if
// Channel ID should not be offered on this connection.
UniquePtr<EVP_PKEY> channel_id_private;
// For a client, this contains the list of supported protocols in wire
// format.
Array<uint8_t> alpn_client_proto_list;
// alps_configs contains the list of supported protocols to use with ALPS,
// along with their corresponding ALPS values.
GrowableArray<ALPSConfig> alps_configs;
// Contains the QUIC transport params that this endpoint will send.
Array<uint8_t> quic_transport_params;
// Contains the context used to decide whether to accept early data in QUIC.
Array<uint8_t> quic_early_data_context;
// verify_sigalgs, if not empty, is the set of signature algorithms
// accepted from the peer in decreasing order of preference.
Array<uint16_t> verify_sigalgs;
// srtp_profiles is the list of configured SRTP protection profiles for
// DTLS-SRTP.
UniquePtr<STACK_OF(SRTP_PROTECTION_PROFILE)> srtp_profiles;
// client_ech_config_list, if not empty, is a serialized ECHConfigList
// structure for the client to use when negotiating ECH.
Array<uint8_t> client_ech_config_list;
// tls13_cipher_policy limits the set of ciphers that can be selected when
// negotiating a TLS 1.3 connection.
enum ssl_compliance_policy_t tls13_cipher_policy = ssl_compliance_policy_none;
// verify_mode is a bitmask of |SSL_VERIFY_*| values.
uint8_t verify_mode = SSL_VERIFY_NONE;
// ech_grease_enabled controls whether ECH GREASE may be sent in the
// ClientHello.
bool ech_grease_enabled : 1;
// Enable signed certificate time stamps. Currently client only.
bool signed_cert_timestamps_enabled : 1;
// ocsp_stapling_enabled is only used by client connections and indicates
// whether OCSP stapling will be requested.
bool ocsp_stapling_enabled : 1;
// channel_id_enabled is copied from the |SSL_CTX|. For a server, it means
// that we'll accept Channel IDs from clients. It is ignored on the client.
bool channel_id_enabled : 1;
// If enforce_rsa_key_usage is true, the handshake will fail if the
// keyUsage extension is present and incompatible with the TLS usage.
// This field is not read until after certificate verification.
bool enforce_rsa_key_usage : 1;
// retain_only_sha256_of_client_certs is true if we should compute the SHA256
// hash of the peer's certificate and then discard it to save memory and
// session space. Only effective on the server side.
bool retain_only_sha256_of_client_certs : 1;
// handoff indicates that a server should stop after receiving the
// ClientHello and pause the handshake in such a way that |SSL_get_error|
// returns |SSL_ERROR_HANDOFF|. This is copied in |SSL_new| from the |SSL_CTX|
// element of the same name and may be cleared if the handoff is declined.
bool handoff : 1;
// shed_handshake_config indicates that the handshake config (this object!)
// should be freed after the handshake completes.
bool shed_handshake_config : 1;
// jdk11_workaround is whether to disable TLS 1.3 for JDK 11 clients, as a
// workaround for https://bugs.openjdk.java.net/browse/JDK-8211806.
bool jdk11_workaround : 1;
// QUIC drafts up to and including 32 used a different TLS extension
// codepoint to convey QUIC's transport parameters.
bool quic_use_legacy_codepoint : 1;
// permute_extensions is whether to permute extensions when sending messages.
bool permute_extensions : 1;
// aes_hw_override if set indicates we should override checking for aes
// hardware support, and use the value in aes_hw_override_value instead.
bool aes_hw_override : 1;
// aes_hw_override_value is used for testing to indicate the support or lack
// of support for AES hw. The value is only considered if |aes_hw_override| is
// true.
bool aes_hw_override_value : 1;
// alps_use_new_codepoint if set indicates we use new ALPS extension codepoint
// to negotiate and convey application settings.
bool alps_use_new_codepoint : 1;
};
// From RFC 8446, used in determining PSK modes.
#define SSL_PSK_DHE_KE 0x1
// kMaxEarlyDataAccepted is the advertised number of plaintext bytes of early
// data that will be accepted. This value should be slightly below
// kMaxEarlyDataSkipped in tls_record.c, which is measured in ciphertext.
static const size_t kMaxEarlyDataAccepted = 14336;
UniquePtr<CERT> ssl_cert_dup(CERT *cert);
void ssl_cert_clear_certs(CERT *cert);
bool ssl_set_cert(CERT *cert, UniquePtr<CRYPTO_BUFFER> buffer);
bool ssl_is_key_type_supported(int key_type);
// ssl_compare_public_and_private_key returns true if |pubkey| is the public
// counterpart to |privkey|. Otherwise it returns false and pushes a helpful
// message on the error queue.
bool ssl_compare_public_and_private_key(const EVP_PKEY *pubkey,
const EVP_PKEY *privkey);
bool ssl_cert_check_private_key(const CERT *cert, const EVP_PKEY *privkey);
bool ssl_get_new_session(SSL_HANDSHAKE *hs);
bool ssl_encrypt_ticket(SSL_HANDSHAKE *hs, CBB *out,
const SSL_SESSION *session);
bool ssl_ctx_rotate_ticket_encryption_key(SSL_CTX *ctx);
// ssl_session_new returns a newly-allocated blank |SSL_SESSION| or nullptr on
// error.
UniquePtr<SSL_SESSION> ssl_session_new(const SSL_X509_METHOD *x509_method);
// ssl_hash_session_id returns a hash of |session_id|, suitable for a hash table
// keyed on session IDs.
uint32_t ssl_hash_session_id(Span<const uint8_t> session_id);
// SSL_SESSION_parse parses an |SSL_SESSION| from |cbs| and advances |cbs| over
// the parsed data.
OPENSSL_EXPORT UniquePtr<SSL_SESSION> SSL_SESSION_parse(
CBS *cbs, const SSL_X509_METHOD *x509_method, CRYPTO_BUFFER_POOL *pool);
// ssl_session_serialize writes |in| to |cbb| as if it were serialising a
// session for Session-ID resumption. It returns true on success and false on
// error.
OPENSSL_EXPORT bool ssl_session_serialize(const SSL_SESSION *in, CBB *cbb);
// ssl_session_is_context_valid returns whether |session|'s session ID context
// matches the one set on |hs|.
bool ssl_session_is_context_valid(const SSL_HANDSHAKE *hs,
const SSL_SESSION *session);
// ssl_session_is_time_valid returns true if |session| is still valid and false
// if it has expired.
bool ssl_session_is_time_valid(const SSL *ssl, const SSL_SESSION *session);
// ssl_session_is_resumable returns whether |session| is resumable for |hs|.
bool ssl_session_is_resumable(const SSL_HANDSHAKE *hs,
const SSL_SESSION *session);
// ssl_session_protocol_version returns the protocol version associated with
// |session|. Note that despite the name, this is not the same as
// |SSL_SESSION_get_protocol_version|. The latter is based on upstream's name.
uint16_t ssl_session_protocol_version(const SSL_SESSION *session);
// ssl_session_get_digest returns the digest used in |session|.
const EVP_MD *ssl_session_get_digest(const SSL_SESSION *session);
void ssl_set_session(SSL *ssl, SSL_SESSION *session);
// ssl_get_prev_session looks up the previous session based on |client_hello|.
// On success, it sets |*out_session| to the session or nullptr if none was
// found. If the session could not be looked up synchronously, it returns
// |ssl_hs_pending_session| and should be called again. If a ticket could not be
// decrypted immediately it returns |ssl_hs_pending_ticket| and should also
// be called again. Otherwise, it returns |ssl_hs_error|.
enum ssl_hs_wait_t ssl_get_prev_session(SSL_HANDSHAKE *hs,
UniquePtr<SSL_SESSION> *out_session,
bool *out_tickets_supported,
bool *out_renew_ticket,
const SSL_CLIENT_HELLO *client_hello);
// The following flags determine which parts of the session are duplicated.
#define SSL_SESSION_DUP_AUTH_ONLY 0x0
#define SSL_SESSION_INCLUDE_TICKET 0x1
#define SSL_SESSION_INCLUDE_NONAUTH 0x2
#define SSL_SESSION_DUP_ALL \
(SSL_SESSION_INCLUDE_TICKET | SSL_SESSION_INCLUDE_NONAUTH)
// SSL_SESSION_dup returns a newly-allocated |SSL_SESSION| with a copy of the
// fields in |session| or nullptr on error. The new session is non-resumable and
// must be explicitly marked resumable once it has been filled in.
OPENSSL_EXPORT UniquePtr<SSL_SESSION> SSL_SESSION_dup(SSL_SESSION *session,
int dup_flags);
// ssl_session_rebase_time updates |session|'s start time to the current time,
// adjusting the timeout so the expiration time is unchanged.
void ssl_session_rebase_time(SSL *ssl, SSL_SESSION *session);
// ssl_session_renew_timeout calls |ssl_session_rebase_time| and renews
// |session|'s timeout to |timeout| (measured from the current time). The
// renewal is clamped to the session's auth_timeout.
void ssl_session_renew_timeout(SSL *ssl, SSL_SESSION *session,
uint32_t timeout);
void ssl_update_cache(SSL *ssl);
void ssl_send_alert(SSL *ssl, int level, int desc);
int ssl_send_alert_impl(SSL *ssl, int level, int desc);
bool tls_get_message(const SSL *ssl, SSLMessage *out);
ssl_open_record_t tls_open_handshake(SSL *ssl, size_t *out_consumed,