| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) | |
| * All rights reserved. | |
| * | |
| * This package is an SSL implementation written | |
| * by Eric Young (eay@cryptsoft.com). | |
| * The implementation was written so as to conform with Netscapes SSL. | |
| * | |
| * This library is free for commercial and non-commercial use as long as | |
| * the following conditions are aheared to. The following conditions | |
| * apply to all code found in this distribution, be it the RC4, RSA, | |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation | |
| * included with this distribution is covered by the same copyright terms | |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). | |
| * | |
| * Copyright remains Eric Young's, and as such any Copyright notices in | |
| * the code are not to be removed. | |
| * If this package is used in a product, Eric Young should be given attribution | |
| * as the author of the parts of the library used. | |
| * This can be in the form of a textual message at program startup or | |
| * in documentation (online or textual) provided with the package. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. All advertising materials mentioning features or use of this software | |
| * must display the following acknowledgement: | |
| * "This product includes cryptographic software written by | |
| * Eric Young (eay@cryptsoft.com)" | |
| * The word 'cryptographic' can be left out if the rouines from the library | |
| * being used are not cryptographic related :-). | |
| * 4. If you include any Windows specific code (or a derivative thereof) from | |
| * the apps directory (application code) you must include an acknowledgement: | |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND | |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| * | |
| * The licence and distribution terms for any publically available version or | |
| * derivative of this code cannot be changed. i.e. this code cannot simply be | |
| * copied and put under another distribution licence | |
| * [including the GNU Public Licence.] | |
| */ | |
| /* ==================================================================== | |
| * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * | |
| * 3. All advertising materials mentioning features or use of this | |
| * software must display the following acknowledgment: | |
| * "This product includes software developed by the OpenSSL Project | |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" | |
| * | |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to | |
| * endorse or promote products derived from this software without | |
| * prior written permission. For written permission, please contact | |
| * openssl-core@openssl.org. | |
| * | |
| * 5. Products derived from this software may not be called "OpenSSL" | |
| * nor may "OpenSSL" appear in their names without prior written | |
| * permission of the OpenSSL Project. | |
| * | |
| * 6. Redistributions of any form whatsoever must retain the following | |
| * acknowledgment: | |
| * "This product includes software developed by the OpenSSL Project | |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY | |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR | |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
| * OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * ==================================================================== | |
| * | |
| * This product includes cryptographic software written by Eric Young | |
| * (eay@cryptsoft.com). This product includes software written by Tim | |
| * Hudson (tjh@cryptsoft.com). */ | |
| /* ==================================================================== | |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. | |
| * ECC cipher suite support in OpenSSL originally developed by | |
| * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. */ | |
| #include <assert.h> | |
| #include <limits.h> | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <openssl/buf.h> | |
| #include <openssl/err.h> | |
| #include <openssl/evp.h> | |
| #include <openssl/mem.h> | |
| #include <openssl/md5.h> | |
| #include <openssl/obj.h> | |
| #include <openssl/rand.h> | |
| #include <openssl/sha.h> | |
| #include <openssl/x509.h> | |
| #include "internal.h" | |
| /* ssl3_do_write sends |s->init_buf| in records of type 'type' | |
| * (SSL3_RT_HANDSHAKE or SSL3_RT_CHANGE_CIPHER_SPEC). It returns -1 on error, 1 | |
| * on success or zero if the transmission is still incomplete. */ | |
| int ssl3_do_write(SSL *s, int type) { | |
| int n; | |
| n = ssl3_write_bytes(s, type, &s->init_buf->data[s->init_off], s->init_num); | |
| if (n < 0) { | |
| return -1; | |
| } | |
| if (n == s->init_num) { | |
| if (s->msg_callback) { | |
| s->msg_callback(1, s->version, type, s->init_buf->data, | |
| (size_t)(s->init_off + s->init_num), s, | |
| s->msg_callback_arg); | |
| } | |
| return 1; | |
| } | |
| s->init_off += n; | |
| s->init_num -= n; | |
| return 0; | |
| } | |
| int ssl3_send_finished(SSL *s, int a, int b, const char *sender, int slen) { | |
| uint8_t *p; | |
| int n; | |
| if (s->state == a) { | |
| p = ssl_handshake_start(s); | |
| n = s->enc_method->final_finish_mac(s, sender, slen, s->s3->tmp.finish_md); | |
| if (n == 0) { | |
| return 0; | |
| } | |
| s->s3->tmp.finish_md_len = n; | |
| memcpy(p, s->s3->tmp.finish_md, n); | |
| /* Log the master secret, if logging is enabled. */ | |
| if (!ssl_ctx_log_master_secret(s->ctx, s->s3->client_random, | |
| SSL3_RANDOM_SIZE, s->session->master_key, | |
| s->session->master_key_length)) { | |
| return 0; | |
| } | |
| /* Copy the finished so we can use it for renegotiation checks */ | |
| if (s->server) { | |
| assert(n <= EVP_MAX_MD_SIZE); | |
| memcpy(s->s3->previous_server_finished, s->s3->tmp.finish_md, n); | |
| s->s3->previous_server_finished_len = n; | |
| } else { | |
| assert(n <= EVP_MAX_MD_SIZE); | |
| memcpy(s->s3->previous_client_finished, s->s3->tmp.finish_md, n); | |
| s->s3->previous_client_finished_len = n; | |
| } | |
| if (!ssl_set_handshake_header(s, SSL3_MT_FINISHED, n)) { | |
| return 0; | |
| } | |
| s->state = b; | |
| } | |
| /* SSL3_ST_SEND_xxxxxx_HELLO_B */ | |
| return ssl_do_write(s); | |
| } | |
| /* ssl3_take_mac calculates the Finished MAC for the handshakes messages seen | |
| * so far. */ | |
| static void ssl3_take_mac(SSL *s) { | |
| const char *sender; | |
| int slen; | |
| /* If no new cipher setup then return immediately: other functions will set | |
| * the appropriate error. */ | |
| if (s->s3->tmp.new_cipher == NULL) { | |
| return; | |
| } | |
| if (s->state & SSL_ST_CONNECT) { | |
| sender = s->enc_method->server_finished_label; | |
| slen = s->enc_method->server_finished_label_len; | |
| } else { | |
| sender = s->enc_method->client_finished_label; | |
| slen = s->enc_method->client_finished_label_len; | |
| } | |
| s->s3->tmp.peer_finish_md_len = s->enc_method->final_finish_mac( | |
| s, sender, slen, s->s3->tmp.peer_finish_md); | |
| } | |
| int ssl3_get_finished(SSL *s, int a, int b) { | |
| int al, finished_len, ok; | |
| long message_len; | |
| uint8_t *p; | |
| message_len = | |
| s->method->ssl_get_message(s, a, b, SSL3_MT_FINISHED, EVP_MAX_MD_SIZE, | |
| ssl_dont_hash_message, &ok); | |
| if (!ok) { | |
| return message_len; | |
| } | |
| /* Snapshot the finished hash before incorporating the new message. */ | |
| ssl3_take_mac(s); | |
| if (!ssl3_hash_current_message(s)) { | |
| goto err; | |
| } | |
| /* If this occurs, we have missed a message. | |
| * TODO(davidben): Is this check now redundant with SSL3_FLAGS_EXPECT_CCS? */ | |
| if (!s->s3->change_cipher_spec) { | |
| al = SSL_AD_UNEXPECTED_MESSAGE; | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_GOT_A_FIN_BEFORE_A_CCS); | |
| goto f_err; | |
| } | |
| s->s3->change_cipher_spec = 0; | |
| p = s->init_msg; | |
| finished_len = s->s3->tmp.peer_finish_md_len; | |
| if (finished_len != message_len) { | |
| al = SSL_AD_DECODE_ERROR; | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_DIGEST_LENGTH); | |
| goto f_err; | |
| } | |
| if (CRYPTO_memcmp(p, s->s3->tmp.peer_finish_md, finished_len) != 0) { | |
| al = SSL_AD_DECRYPT_ERROR; | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_DIGEST_CHECK_FAILED); | |
| goto f_err; | |
| } | |
| /* Copy the finished so we can use it for renegotiation checks */ | |
| if (s->server) { | |
| assert(finished_len <= EVP_MAX_MD_SIZE); | |
| memcpy(s->s3->previous_client_finished, s->s3->tmp.peer_finish_md, finished_len); | |
| s->s3->previous_client_finished_len = finished_len; | |
| } else { | |
| assert(finished_len <= EVP_MAX_MD_SIZE); | |
| memcpy(s->s3->previous_server_finished, s->s3->tmp.peer_finish_md, finished_len); | |
| s->s3->previous_server_finished_len = finished_len; | |
| } | |
| return 1; | |
| f_err: | |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); | |
| err: | |
| return 0; | |
| } | |
| /* for these 2 messages, we need to | |
| * ssl->enc_read_ctx re-init | |
| * ssl->s3->read_sequence zero | |
| * ssl->s3->read_mac_secret re-init | |
| * ssl->session->read_sym_enc assign | |
| * ssl->session->read_compression assign | |
| * ssl->session->read_hash assign */ | |
| int ssl3_send_change_cipher_spec(SSL *s, int a, int b) { | |
| if (s->state == a) { | |
| *((uint8_t *)s->init_buf->data) = SSL3_MT_CCS; | |
| s->init_num = 1; | |
| s->init_off = 0; | |
| s->state = b; | |
| } | |
| /* SSL3_ST_CW_CHANGE_B */ | |
| return ssl3_do_write(s, SSL3_RT_CHANGE_CIPHER_SPEC); | |
| } | |
| int ssl3_output_cert_chain(SSL *s) { | |
| uint8_t *p; | |
| unsigned long l = 3 + SSL_HM_HEADER_LENGTH(s); | |
| if (!ssl_add_cert_chain(s, &l)) { | |
| return 0; | |
| } | |
| l -= 3 + SSL_HM_HEADER_LENGTH(s); | |
| p = ssl_handshake_start(s); | |
| l2n3(l, p); | |
| l += 3; | |
| return ssl_set_handshake_header(s, SSL3_MT_CERTIFICATE, l); | |
| } | |
| /* Obtain handshake message of message type |msg_type| (any if |msg_type| == -1), | |
| * maximum acceptable body length |max|. The first four bytes (msg_type and | |
| * length) are read in state |header_state|, the body is read in state |body_state|. */ | |
| long ssl3_get_message(SSL *s, int header_state, int body_state, int msg_type, | |
| long max, enum ssl_hash_message_t hash_message, int *ok) { | |
| uint8_t *p; | |
| unsigned long l; | |
| long n; | |
| int al; | |
| if (s->s3->tmp.reuse_message) { | |
| /* A ssl_dont_hash_message call cannot be combined with reuse_message; the | |
| * ssl_dont_hash_message would have to have been applied to the previous | |
| * call. */ | |
| assert(hash_message == ssl_hash_message); | |
| s->s3->tmp.reuse_message = 0; | |
| if (msg_type >= 0 && s->s3->tmp.message_type != msg_type) { | |
| al = SSL_AD_UNEXPECTED_MESSAGE; | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_MESSAGE); | |
| goto f_err; | |
| } | |
| *ok = 1; | |
| s->state = body_state; | |
| s->init_msg = (uint8_t *)s->init_buf->data + 4; | |
| s->init_num = (int)s->s3->tmp.message_size; | |
| return s->init_num; | |
| } | |
| p = (uint8_t *)s->init_buf->data; | |
| if (s->state == header_state) { | |
| assert(s->init_num < 4); | |
| for (;;) { | |
| while (s->init_num < 4) { | |
| int bytes_read = ssl3_read_bytes(s, SSL3_RT_HANDSHAKE, &p[s->init_num], | |
| 4 - s->init_num, 0); | |
| if (bytes_read <= 0) { | |
| *ok = 0; | |
| return bytes_read; | |
| } | |
| s->init_num += bytes_read; | |
| } | |
| static const uint8_t kHelloRequest[4] = {SSL3_MT_HELLO_REQUEST, 0, 0, 0}; | |
| if (s->server || memcmp(p, kHelloRequest, sizeof(kHelloRequest)) != 0) { | |
| break; | |
| } | |
| /* The server may always send 'Hello Request' messages -- we are doing | |
| * a handshake anyway now, so ignore them if their format is correct. | |
| * Does not count for 'Finished' MAC. */ | |
| s->init_num = 0; | |
| if (s->msg_callback) { | |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, p, 4, s, | |
| s->msg_callback_arg); | |
| } | |
| } | |
| /* s->init_num == 4 */ | |
| if (msg_type >= 0 && *p != msg_type) { | |
| al = SSL_AD_UNEXPECTED_MESSAGE; | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_MESSAGE); | |
| goto f_err; | |
| } | |
| s->s3->tmp.message_type = *(p++); | |
| n2l3(p, l); | |
| if (l > (unsigned long)max) { | |
| al = SSL_AD_ILLEGAL_PARAMETER; | |
| OPENSSL_PUT_ERROR(SSL, SSL_R_EXCESSIVE_MESSAGE_SIZE); | |
| goto f_err; | |
| } | |
| if (l && !BUF_MEM_grow_clean(s->init_buf, l + 4)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_BUF_LIB); | |
| goto err; | |
| } | |
| s->s3->tmp.message_size = l; | |
| s->state = body_state; | |
| s->init_msg = (uint8_t *)s->init_buf->data + 4; | |
| s->init_num = 0; | |
| } | |
| /* next state (body_state) */ | |
| p = s->init_msg; | |
| n = s->s3->tmp.message_size - s->init_num; | |
| while (n > 0) { | |
| int bytes_read = ssl3_read_bytes(s, SSL3_RT_HANDSHAKE, &p[s->init_num], n, | |
| 0); | |
| if (bytes_read <= 0) { | |
| s->rwstate = SSL_READING; | |
| *ok = 0; | |
| return bytes_read; | |
| } | |
| s->init_num += bytes_read; | |
| n -= bytes_read; | |
| } | |
| /* Feed this message into MAC computation. */ | |
| if (hash_message == ssl_hash_message && !ssl3_hash_current_message(s)) { | |
| goto err; | |
| } | |
| if (s->msg_callback) { | |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, s->init_buf->data, | |
| (size_t)s->init_num + 4, s, s->msg_callback_arg); | |
| } | |
| *ok = 1; | |
| return s->init_num; | |
| f_err: | |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); | |
| err: | |
| *ok = 0; | |
| return -1; | |
| } | |
| int ssl3_hash_current_message(SSL *s) { | |
| /* The handshake header (different size between DTLS and TLS) is included in | |
| * the hash. */ | |
| size_t header_len = s->init_msg - (uint8_t *)s->init_buf->data; | |
| return ssl3_update_handshake_hash(s, (uint8_t *)s->init_buf->data, | |
| s->init_num + header_len); | |
| } | |
| /* ssl3_cert_verify_hash is documented as needing EVP_MAX_MD_SIZE because that | |
| * is sufficient pre-TLS1.2 as well. */ | |
| OPENSSL_COMPILE_ASSERT(EVP_MAX_MD_SIZE > MD5_DIGEST_LENGTH + SHA_DIGEST_LENGTH, | |
| combined_tls_hash_fits_in_max); | |
| int ssl3_cert_verify_hash(SSL *s, uint8_t *out, size_t *out_len, | |
| const EVP_MD **out_md, int pkey_type) { | |
| /* For TLS v1.2 send signature algorithm and signature using | |
| * agreed digest and cached handshake records. Otherwise, use | |
| * SHA1 or MD5 + SHA1 depending on key type. */ | |
| if (SSL_USE_SIGALGS(s)) { | |
| EVP_MD_CTX mctx; | |
| unsigned len; | |
| EVP_MD_CTX_init(&mctx); | |
| if (!EVP_DigestInit_ex(&mctx, *out_md, NULL) || | |
| !EVP_DigestUpdate(&mctx, s->s3->handshake_buffer->data, | |
| s->s3->handshake_buffer->length) || | |
| !EVP_DigestFinal(&mctx, out, &len)) { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_EVP_LIB); | |
| EVP_MD_CTX_cleanup(&mctx); | |
| return 0; | |
| } | |
| *out_len = len; | |
| } else if (pkey_type == EVP_PKEY_RSA) { | |
| if (s->enc_method->cert_verify_mac(s, NID_md5, out) == 0 || | |
| s->enc_method->cert_verify_mac(s, NID_sha1, out + MD5_DIGEST_LENGTH) == | |
| 0) { | |
| return 0; | |
| } | |
| *out_len = MD5_DIGEST_LENGTH + SHA_DIGEST_LENGTH; | |
| *out_md = EVP_md5_sha1(); | |
| } else if (pkey_type == EVP_PKEY_EC) { | |
| if (s->enc_method->cert_verify_mac(s, NID_sha1, out) == 0) { | |
| return 0; | |
| } | |
| *out_len = SHA_DIGEST_LENGTH; | |
| *out_md = EVP_sha1(); | |
| } else { | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| int ssl_verify_alarm_type(long type) { | |
| int al; | |
| switch (type) { | |
| case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT: | |
| case X509_V_ERR_UNABLE_TO_GET_CRL: | |
| case X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER: | |
| al = SSL_AD_UNKNOWN_CA; | |
| break; | |
| case X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE: | |
| case X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE: | |
| case X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY: | |
| case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD: | |
| case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD: | |
| case X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD: | |
| case X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD: | |
| case X509_V_ERR_CERT_NOT_YET_VALID: | |
| case X509_V_ERR_CRL_NOT_YET_VALID: | |
| case X509_V_ERR_CERT_UNTRUSTED: | |
| case X509_V_ERR_CERT_REJECTED: | |
| al = SSL_AD_BAD_CERTIFICATE; | |
| break; | |
| case X509_V_ERR_CERT_SIGNATURE_FAILURE: | |
| case X509_V_ERR_CRL_SIGNATURE_FAILURE: | |
| al = SSL_AD_DECRYPT_ERROR; | |
| break; | |
| case X509_V_ERR_CERT_HAS_EXPIRED: | |
| case X509_V_ERR_CRL_HAS_EXPIRED: | |
| al = SSL_AD_CERTIFICATE_EXPIRED; | |
| break; | |
| case X509_V_ERR_CERT_REVOKED: | |
| al = SSL_AD_CERTIFICATE_REVOKED; | |
| break; | |
| case X509_V_ERR_OUT_OF_MEM: | |
| al = SSL_AD_INTERNAL_ERROR; | |
| break; | |
| case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT: | |
| case X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN: | |
| case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: | |
| case X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE: | |
| case X509_V_ERR_CERT_CHAIN_TOO_LONG: | |
| case X509_V_ERR_PATH_LENGTH_EXCEEDED: | |
| case X509_V_ERR_INVALID_CA: | |
| al = SSL_AD_UNKNOWN_CA; | |
| break; | |
| case X509_V_ERR_APPLICATION_VERIFICATION: | |
| al = SSL_AD_HANDSHAKE_FAILURE; | |
| break; | |
| case X509_V_ERR_INVALID_PURPOSE: | |
| al = SSL_AD_UNSUPPORTED_CERTIFICATE; | |
| break; | |
| default: | |
| al = SSL_AD_CERTIFICATE_UNKNOWN; | |
| break; | |
| } | |
| return al; | |
| } | |
| int ssl3_setup_read_buffer(SSL *s) { | |
| uint8_t *p; | |
| size_t len, align = 0, headerlen; | |
| if (SSL_IS_DTLS(s)) { | |
| headerlen = DTLS1_RT_HEADER_LENGTH; | |
| } else { | |
| headerlen = SSL3_RT_HEADER_LENGTH; | |
| } | |
| #if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD != 0 | |
| align = (-SSL3_RT_HEADER_LENGTH) & (SSL3_ALIGN_PAYLOAD - 1); | |
| #endif | |
| if (s->s3->rbuf.buf == NULL) { | |
| len = SSL3_RT_MAX_ENCRYPTED_LENGTH + headerlen + align; | |
| if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER) { | |
| s->s3->init_extra = 1; | |
| len += SSL3_RT_MAX_EXTRA; | |
| } | |
| p = OPENSSL_malloc(len); | |
| if (p == NULL) { | |
| goto err; | |
| } | |
| s->s3->rbuf.buf = p; | |
| s->s3->rbuf.len = len; | |
| } | |
| s->packet = &s->s3->rbuf.buf[0]; | |
| return 1; | |
| err: | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_MALLOC_FAILURE); | |
| return 0; | |
| } | |
| int ssl3_setup_write_buffer(SSL *s) { | |
| uint8_t *p; | |
| size_t len, align = 0, headerlen; | |
| if (SSL_IS_DTLS(s)) { | |
| headerlen = DTLS1_RT_HEADER_LENGTH + 1; | |
| } else { | |
| headerlen = SSL3_RT_HEADER_LENGTH; | |
| } | |
| #if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD != 0 | |
| align = (-SSL3_RT_HEADER_LENGTH) & (SSL3_ALIGN_PAYLOAD - 1); | |
| #endif | |
| if (s->s3->wbuf.buf == NULL) { | |
| len = s->max_send_fragment + SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD + | |
| headerlen + align; | |
| /* Account for 1/n-1 record splitting. */ | |
| if (s->mode & SSL_MODE_CBC_RECORD_SPLITTING) { | |
| len += headerlen + align + 1 + SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD; | |
| } | |
| p = OPENSSL_malloc(len); | |
| if (p == NULL) { | |
| goto err; | |
| } | |
| s->s3->wbuf.buf = p; | |
| s->s3->wbuf.len = len; | |
| } | |
| return 1; | |
| err: | |
| OPENSSL_PUT_ERROR(SSL, ERR_R_MALLOC_FAILURE); | |
| return 0; | |
| } | |
| int ssl3_release_write_buffer(SSL *s) { | |
| OPENSSL_free(s->s3->wbuf.buf); | |
| s->s3->wbuf.buf = NULL; | |
| return 1; | |
| } | |
| int ssl3_release_read_buffer(SSL *s) { | |
| OPENSSL_free(s->s3->rbuf.buf); | |
| s->s3->rbuf.buf = NULL; | |
| s->packet = NULL; | |
| return 1; | |
| } | |
| int ssl_fill_hello_random(uint8_t *out, size_t len, int is_server) { | |
| if (is_server) { | |
| const uint32_t current_time = time(NULL); | |
| uint8_t *p = out; | |
| if (len < 4) { | |
| return 0; | |
| } | |
| p[0] = current_time >> 24; | |
| p[1] = current_time >> 16; | |
| p[2] = current_time >> 8; | |
| p[3] = current_time; | |
| return RAND_bytes(p + 4, len - 4); | |
| } else { | |
| return RAND_bytes(out, len); | |
| } | |
| } |