blob: a8c08c276c1b9b3722da13ef4b6246ab7d3a2b64 [file] [log] [blame]
#!/usr/bin/env perl
#
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# SHA1 for ARMv8.
#
# Performance in cycles per processed byte and improvement coefficient
# over code generated with "default" compiler:
#
# hardware-assisted software(*)
# Apple A7 2.31 4.13 (+14%)
# Cortex-A53 2.24 8.03 (+97%)
# Cortex-A57 2.35 7.88 (+74%)
# Denver 2.13 3.97 (+0%)(**)
# X-Gene 8.80 (+200%)
#
# (*) Software results are presented mostly for reference purposes.
# (**) Keep in mind that Denver relies on binary translation, which
# optimizes compiler output at run-time.
$flavour = shift;
$output = shift;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
open OUT,"| \"$^X\" $xlate $flavour $output";
*STDOUT=*OUT;
($ctx,$inp,$num)=("x0","x1","x2");
@Xw=map("w$_",(3..17,19));
@Xx=map("x$_",(3..17,19));
@V=($A,$B,$C,$D,$E)=map("w$_",(20..24));
($t0,$t1,$t2,$K)=map("w$_",(25..28));
sub BODY_00_19 {
my ($i,$a,$b,$c,$d,$e)=@_;
my $j=($i+2)&15;
$code.=<<___ if ($i<15 && !($i&1));
lsr @Xx[$i+1],@Xx[$i],#32
___
$code.=<<___ if ($i<14 && !($i&1));
ldr @Xx[$i+2],[$inp,#`($i+2)*4-64`]
___
$code.=<<___ if ($i<14 && ($i&1));
#ifdef __ARMEB__
ror @Xx[$i+1],@Xx[$i+1],#32
#else
rev32 @Xx[$i+1],@Xx[$i+1]
#endif
___
$code.=<<___ if ($i<14);
bic $t0,$d,$b
and $t1,$c,$b
ror $t2,$a,#27
add $d,$d,$K // future e+=K
orr $t0,$t0,$t1
add $e,$e,$t2 // e+=rot(a,5)
ror $b,$b,#2
add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
add $e,$e,$t0 // e+=F(b,c,d)
___
$code.=<<___ if ($i==19);
movz $K,#0xeba1
movk $K,#0x6ed9,lsl#16
___
$code.=<<___ if ($i>=14);
eor @Xw[$j],@Xw[$j],@Xw[($j+2)&15]
bic $t0,$d,$b
and $t1,$c,$b
ror $t2,$a,#27
eor @Xw[$j],@Xw[$j],@Xw[($j+8)&15]
add $d,$d,$K // future e+=K
orr $t0,$t0,$t1
add $e,$e,$t2 // e+=rot(a,5)
eor @Xw[$j],@Xw[$j],@Xw[($j+13)&15]
ror $b,$b,#2
add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
add $e,$e,$t0 // e+=F(b,c,d)
ror @Xw[$j],@Xw[$j],#31
___
}
sub BODY_40_59 {
my ($i,$a,$b,$c,$d,$e)=@_;
my $j=($i+2)&15;
$code.=<<___ if ($i==59);
movz $K,#0xc1d6
movk $K,#0xca62,lsl#16
___
$code.=<<___;
orr $t0,$b,$c
and $t1,$b,$c
eor @Xw[$j],@Xw[$j],@Xw[($j+2)&15]
ror $t2,$a,#27
and $t0,$t0,$d
add $d,$d,$K // future e+=K
eor @Xw[$j],@Xw[$j],@Xw[($j+8)&15]
add $e,$e,$t2 // e+=rot(a,5)
orr $t0,$t0,$t1
ror $b,$b,#2
eor @Xw[$j],@Xw[$j],@Xw[($j+13)&15]
add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
add $e,$e,$t0 // e+=F(b,c,d)
ror @Xw[$j],@Xw[$j],#31
___
}
sub BODY_20_39 {
my ($i,$a,$b,$c,$d,$e)=@_;
my $j=($i+2)&15;
$code.=<<___ if ($i==39);
movz $K,#0xbcdc
movk $K,#0x8f1b,lsl#16
___
$code.=<<___ if ($i<78);
eor @Xw[$j],@Xw[$j],@Xw[($j+2)&15]
eor $t0,$d,$b
ror $t2,$a,#27
add $d,$d,$K // future e+=K
eor @Xw[$j],@Xw[$j],@Xw[($j+8)&15]
eor $t0,$t0,$c
add $e,$e,$t2 // e+=rot(a,5)
ror $b,$b,#2
eor @Xw[$j],@Xw[$j],@Xw[($j+13)&15]
add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
add $e,$e,$t0 // e+=F(b,c,d)
ror @Xw[$j],@Xw[$j],#31
___
$code.=<<___ if ($i==78);
ldp @Xw[1],@Xw[2],[$ctx]
eor $t0,$d,$b
ror $t2,$a,#27
add $d,$d,$K // future e+=K
eor $t0,$t0,$c
add $e,$e,$t2 // e+=rot(a,5)
ror $b,$b,#2
add $d,$d,@Xw[($i+1)&15] // future e+=X[i]
add $e,$e,$t0 // e+=F(b,c,d)
___
$code.=<<___ if ($i==79);
ldp @Xw[3],@Xw[4],[$ctx,#8]
eor $t0,$d,$b
ror $t2,$a,#27
eor $t0,$t0,$c
add $e,$e,$t2 // e+=rot(a,5)
ror $b,$b,#2
ldr @Xw[5],[$ctx,#16]
add $e,$e,$t0 // e+=F(b,c,d)
___
}
$code.=<<___;
#include "arm_arch.h"
.text
.extern OPENSSL_armcap_P
.globl sha1_block_data_order
.type sha1_block_data_order,%function
.align 6
sha1_block_data_order:
ldr x16,.LOPENSSL_armcap_P
adr x17,.LOPENSSL_armcap_P
add x16,x16,x17
ldr w16,[x16]
tst w16,#ARMV8_SHA1
b.ne .Lv8_entry
stp x29,x30,[sp,#-96]!
add x29,sp,#0
stp x19,x20,[sp,#16]
stp x21,x22,[sp,#32]
stp x23,x24,[sp,#48]
stp x25,x26,[sp,#64]
stp x27,x28,[sp,#80]
ldp $A,$B,[$ctx]
ldp $C,$D,[$ctx,#8]
ldr $E,[$ctx,#16]
.Loop:
ldr @Xx[0],[$inp],#64
movz $K,#0x7999
sub $num,$num,#1
movk $K,#0x5a82,lsl#16
#ifdef __ARMEB__
ror $Xx[0],@Xx[0],#32
#else
rev32 @Xx[0],@Xx[0]
#endif
add $E,$E,$K // warm it up
add $E,$E,@Xw[0]
___
for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
add $B,$B,@Xw[2]
add $C,$C,@Xw[3]
add $A,$A,@Xw[1]
add $D,$D,@Xw[4]
add $E,$E,@Xw[5]
stp $A,$B,[$ctx]
stp $C,$D,[$ctx,#8]
str $E,[$ctx,#16]
cbnz $num,.Loop
ldp x19,x20,[sp,#16]
ldp x21,x22,[sp,#32]
ldp x23,x24,[sp,#48]
ldp x25,x26,[sp,#64]
ldp x27,x28,[sp,#80]
ldr x29,[sp],#96
ret
.size sha1_block_data_order,.-sha1_block_data_order
___
{{{
my ($ABCD,$E,$E0,$E1)=map("v$_.16b",(0..3));
my @MSG=map("v$_.16b",(4..7));
my @Kxx=map("v$_.4s",(16..19));
my ($W0,$W1)=("v20.4s","v21.4s");
my $ABCD_SAVE="v22.16b";
$code.=<<___;
.type sha1_block_armv8,%function
.align 6
sha1_block_armv8:
.Lv8_entry:
stp x29,x30,[sp,#-16]!
add x29,sp,#0
adr x4,.Lconst
eor $E,$E,$E
ld1.32 {$ABCD},[$ctx],#16
ld1.32 {$E}[0],[$ctx]
sub $ctx,$ctx,#16
ld1.32 {@Kxx[0]-@Kxx[3]},[x4]
.Loop_hw:
ld1 {@MSG[0]-@MSG[3]},[$inp],#64
sub $num,$num,#1
rev32 @MSG[0],@MSG[0]
rev32 @MSG[1],@MSG[1]
add.i32 $W0,@Kxx[0],@MSG[0]
rev32 @MSG[2],@MSG[2]
orr $ABCD_SAVE,$ABCD,$ABCD // offload
add.i32 $W1,@Kxx[0],@MSG[1]
rev32 @MSG[3],@MSG[3]
sha1h $E1,$ABCD
sha1c $ABCD,$E,$W0 // 0
add.i32 $W0,@Kxx[$j],@MSG[2]
sha1su0 @MSG[0],@MSG[1],@MSG[2]
___
for ($j=0,$i=1;$i<20-3;$i++) {
my $f=("c","p","m","p")[$i/5];
$code.=<<___;
sha1h $E0,$ABCD // $i
sha1$f $ABCD,$E1,$W1
add.i32 $W1,@Kxx[$j],@MSG[3]
sha1su1 @MSG[0],@MSG[3]
___
$code.=<<___ if ($i<20-4);
sha1su0 @MSG[1],@MSG[2],@MSG[3]
___
($E0,$E1)=($E1,$E0); ($W0,$W1)=($W1,$W0);
push(@MSG,shift(@MSG)); $j++ if ((($i+3)%5)==0);
}
$code.=<<___;
sha1h $E0,$ABCD // $i
sha1p $ABCD,$E1,$W1
add.i32 $W1,@Kxx[$j],@MSG[3]
sha1h $E1,$ABCD // 18
sha1p $ABCD,$E0,$W0
sha1h $E0,$ABCD // 19
sha1p $ABCD,$E1,$W1
add.i32 $E,$E,$E0
add.i32 $ABCD,$ABCD,$ABCD_SAVE
cbnz $num,.Loop_hw
st1.32 {$ABCD},[$ctx],#16
st1.32 {$E}[0],[$ctx]
ldr x29,[sp],#16
ret
.size sha1_block_armv8,.-sha1_block_armv8
.align 6
.Lconst:
.long 0x5a827999,0x5a827999,0x5a827999,0x5a827999 //K_00_19
.long 0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1 //K_20_39
.long 0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc //K_40_59
.long 0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6 //K_60_79
.LOPENSSL_armcap_P:
.quad OPENSSL_armcap_P-.
.asciz "SHA1 block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
.comm OPENSSL_armcap_P,4,4
___
}}}
{ my %opcode = (
"sha1c" => 0x5e000000, "sha1p" => 0x5e001000,
"sha1m" => 0x5e002000, "sha1su0" => 0x5e003000,
"sha1h" => 0x5e280800, "sha1su1" => 0x5e281800 );
sub unsha1 {
my ($mnemonic,$arg)=@_;
$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
&&
sprintf ".inst\t0x%08x\t//%s %s",
$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
$mnemonic,$arg;
}
}
foreach(split("\n",$code)) {
s/\`([^\`]*)\`/eval($1)/geo;
s/\b(sha1\w+)\s+([qv].*)/unsha1($1,$2)/geo;
s/\.\w?32\b//o and s/\.16b/\.4s/go;
m/(ld|st)1[^\[]+\[0\]/o and s/\.4s/\.s/go;
print $_,"\n";
}
close STDOUT;