blob: da96508c6a1f686ffab0f0f7d88d8e5f5dd8ddc6 [file] [log] [blame]
/* Originally written by Bodo Moeller for the OpenSSL project.
* ====================================================================
* Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
*
* Portions of the attached software ("Contribution") are developed by
* SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
*
* The Contribution is licensed pursuant to the OpenSSL open source
* license provided above.
*
* The elliptic curve binary polynomial software is originally written by
* Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
* Laboratories. */
#ifndef OPENSSL_HEADER_EC_KEY_H
#define OPENSSL_HEADER_EC_KEY_H
#include <openssl/base.h>
#include <openssl/ec.h>
#include <openssl/engine.h>
#include <openssl/ex_data.h>
#if defined(__cplusplus)
extern "C" {
#endif
/* ec_key.h contains functions that handle elliptic-curve points that are
* public/private keys. */
/* EC key objects. */
/* EC_KEY_new returns a fresh |EC_KEY| object or NULL on error. */
OPENSSL_EXPORT EC_KEY *EC_KEY_new(void);
/* EC_KEY_new_method acts the same as |EC_KEY_new|, but takes an explicit
* |ENGINE|. */
OPENSSL_EXPORT EC_KEY *EC_KEY_new_method(const ENGINE *engine);
/* EC_KEY_new_by_curve_name returns a fresh EC_KEY for group specified by |nid|
* or NULL on error. */
OPENSSL_EXPORT EC_KEY *EC_KEY_new_by_curve_name(int nid);
/* EC_KEY_free frees all the data owned by |key| and |key| itself. */
OPENSSL_EXPORT void EC_KEY_free(EC_KEY *key);
/* EC_KEY_copy sets |dst| equal to |src| and returns |dst| or NULL on error. */
OPENSSL_EXPORT EC_KEY *EC_KEY_copy(EC_KEY *dst, const EC_KEY *src);
/* EC_KEY_dup returns a fresh copy of |src| or NULL on error. */
OPENSSL_EXPORT EC_KEY *EC_KEY_dup(const EC_KEY *src);
/* EC_KEY_up_ref increases the reference count of |key|. It returns one on
* success and zero otherwise. */
OPENSSL_EXPORT int EC_KEY_up_ref(EC_KEY *key);
/* EC_KEY_is_opaque returns one if |key| is opaque and doesn't expose its key
* material. Otherwise it return zero. */
OPENSSL_EXPORT int EC_KEY_is_opaque(const EC_KEY *key);
/* EC_KEY_get0_group returns a pointer to the |EC_GROUP| object inside |key|. */
OPENSSL_EXPORT const EC_GROUP *EC_KEY_get0_group(const EC_KEY *key);
/* EC_KEY_set_group sets the |EC_GROUP| object that |key| will use to |group|.
* It returns one on success and zero otherwise. */
OPENSSL_EXPORT int EC_KEY_set_group(EC_KEY *key, const EC_GROUP *group);
/* EC_KEY_get0_private_key returns a pointer to the private key inside |key|. */
OPENSSL_EXPORT const BIGNUM *EC_KEY_get0_private_key(const EC_KEY *key);
/* EC_KEY_set_private_key sets the private key of |key| to |priv|. It returns
* one on success and zero otherwise. */
OPENSSL_EXPORT int EC_KEY_set_private_key(EC_KEY *key, const BIGNUM *prv);
/* EC_KEY_get0_public_key returns a pointer to the public key point inside
* |key|. */
OPENSSL_EXPORT const EC_POINT *EC_KEY_get0_public_key(const EC_KEY *key);
/* EC_KEY_set_public_key sets the public key of |key| to |pub|, by copying it.
* It returns one on success and zero otherwise. */
OPENSSL_EXPORT int EC_KEY_set_public_key(EC_KEY *key, const EC_POINT *pub);
#define EC_PKEY_NO_PARAMETERS 0x001
#define EC_PKEY_NO_PUBKEY 0x002
/* EC_KEY_get_enc_flags returns the encoding flags for |key|, which is a
* bitwise-OR of |EC_PKEY_*| values. */
OPENSSL_EXPORT unsigned EC_KEY_get_enc_flags(const EC_KEY *key);
/* EC_KEY_set_enc_flags sets the encoding flags for |key|, which is a
* bitwise-OR of |EC_PKEY_*| values. */
OPENSSL_EXPORT void EC_KEY_set_enc_flags(EC_KEY *key, unsigned flags);
/* EC_KEY_get_conv_form returns the conversation form that will be used by
* |key|. */
OPENSSL_EXPORT point_conversion_form_t EC_KEY_get_conv_form(const EC_KEY *key);
/* EC_KEY_set_conv_form sets the conversion form to be used by |key|. */
OPENSSL_EXPORT void EC_KEY_set_conv_form(EC_KEY *key,
point_conversion_form_t cform);
/* EC_KEY_check_key performs several checks on |key| (possibly including an
* expensive check that the public key is in the primary subgroup). It returns
* one if all checks pass and zero otherwise. If it returns zero then detail
* about the problem can be found on the error stack. */
OPENSSL_EXPORT int EC_KEY_check_key(const EC_KEY *key);
/* EC_KEY_set_public_key_affine_coordinates sets the public key in |key| to
* (|x|, |y|). It returns one on success and zero otherwise. */
OPENSSL_EXPORT int EC_KEY_set_public_key_affine_coordinates(EC_KEY *key,
BIGNUM *x,
BIGNUM *y);
/* Key generation. */
/* EC_KEY_generate_key generates a random, private key, calculates the
* corresponding public key and stores both in |key|. It returns one on success
* or zero otherwise. */
OPENSSL_EXPORT int EC_KEY_generate_key(EC_KEY *key);
/* Serialisation. */
/* d2i_ECPrivateKey parses an ASN.1, DER-encoded, private key from |len| bytes
* at |*inp|. If |out_key| is not NULL then, on exit, a pointer to the result
* is in |*out_key|. If |*out_key| is already non-NULL on entry then the result
* is written directly into |*out_key|, otherwise a fresh |EC_KEY| is
* allocated. However, one should not depend on writing into |*out_key| because
* this behaviour is likely to change in the future. On successful exit, |*inp|
* is advanced past the DER structure. It returns the result or NULL on
* error. */
OPENSSL_EXPORT EC_KEY *d2i_ECPrivateKey(EC_KEY **out_key, const uint8_t **inp,
long len);
/* i2d_ECPrivateKey marshals an EC private key from |key| to an ASN.1, DER
* structure. If |outp| is not NULL then the result is written to |*outp| and
* |*outp| is advanced just past the output. It returns the number of bytes in
* the result, whether written or not, or a negative value on error. */
OPENSSL_EXPORT int i2d_ECPrivateKey(const EC_KEY *key, uint8_t **outp);
/* d2i_ECParameters parses an ASN.1, DER-encoded, set of EC parameters from
* |len| bytes at |*inp|. If |out_key| is not NULL then, on exit, a pointer to
* the result is in |*out_key|. If |*out_key| is already non-NULL on entry then
* the result is written directly into |*out_key|, otherwise a fresh |EC_KEY|
* is allocated. However, one should not depend on writing into |*out_key|
* because this behaviour is likely to change in the future. On successful
* exit, |*inp| is advanced past the DER structure. It returns the result or
* NULL on error. */
OPENSSL_EXPORT EC_KEY *d2i_ECParameters(EC_KEY **out_key, const uint8_t **inp,
long len);
/* i2d_ECParameters marshals EC parameters from |key| to an ASN.1, DER
* structure. If |outp| is not NULL then the result is written to |*outp| and
* |*outp| is advanced just past the output. It returns the number of bytes in
* the result, whether written or not, or a negative value on error. */
OPENSSL_EXPORT int i2d_ECParameters(const EC_KEY *key, uint8_t **outp);
/* o2i_ECPublicKey parses an EC point from |len| bytes at |*inp| into
* |*out_key|. Note that this differs from the d2i format in that |*out_key|
* must be non-NULL with a group set. On successful exit, |*inp| is advanced by
* |len| bytes. It returns |*out_key| or NULL on error. */
OPENSSL_EXPORT EC_KEY *o2i_ECPublicKey(EC_KEY **out_key, const uint8_t **inp,
long len);
/* i2o_ECPublicKey marshals an EC point from |key|. If |outp| is not NULL then
* the result is written to |*outp| and |*outp| is advanced just past the
* output. It returns the number of bytes in the result, whether written or
* not, or a negative value on error. */
OPENSSL_EXPORT int i2o_ECPublicKey(const EC_KEY *key, unsigned char **outp);
/* ex_data functions.
*
* These functions are wrappers. See |ex_data.h| for details. */
OPENSSL_EXPORT int EC_KEY_get_ex_new_index(long argl, void *argp,
CRYPTO_EX_unused *unused,
CRYPTO_EX_dup *dup_func,
CRYPTO_EX_free *free_func);
OPENSSL_EXPORT int EC_KEY_set_ex_data(EC_KEY *r, int idx, void *arg);
OPENSSL_EXPORT void *EC_KEY_get_ex_data(const EC_KEY *r, int idx);
/* ECDSA method. */
/* ECDSA_FLAG_OPAQUE specifies that this ECDSA_METHOD does not expose its key
* material. This may be set if, for instance, it is wrapping some other crypto
* API, like a platform key store. */
#define ECDSA_FLAG_OPAQUE 1
/* ecdsa_method_st is a structure of function pointers for implementing ECDSA.
* See engine.h. */
struct ecdsa_method_st {
struct openssl_method_common_st common;
void *app_data;
int (*init)(EC_KEY *key);
int (*finish)(EC_KEY *key);
/* group_order_size returns the number of bytes needed to represent the order
* of the group. This is used to calculate the maximum size of an ECDSA
* signature in |ECDSA_size|. */
size_t (*group_order_size)(const EC_KEY *key);
/* sign matches the arguments and behaviour of |ECDSA_sign|. */
int (*sign)(const uint8_t *digest, size_t digest_len, uint8_t *sig,
unsigned int *sig_len, EC_KEY *eckey);
/* verify matches the arguments and behaviour of |ECDSA_verify|. */
int (*verify)(const uint8_t *digest, size_t digest_len, const uint8_t *sig,
size_t sig_len, EC_KEY *eckey);
int flags;
};
/* Deprecated functions. */
/* EC_KEY_set_asn1_flag does nothing. */
OPENSSL_EXPORT void EC_KEY_set_asn1_flag(EC_KEY *key, int flag);
#if defined(__cplusplus)
} /* extern C */
#endif
#endif /* OPENSSL_HEADER_EC_KEY_H */