blob: 8cb312facc9a0b89da4e0377c996b791cbf57bce [file] [log] [blame]
#! /usr/bin/env perl
# Copyright 2014-2020 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
#
# Permission to use under GPLv2 terms is granted.
# ====================================================================
#
# SHA256/512 for ARMv8.
#
# Performance in cycles per processed byte and improvement coefficient
# over code generated with "default" compiler:
#
# SHA256-hw SHA256(*) SHA512
# Apple A7 1.97 10.5 (+33%) 6.73 (-1%(**))
# Cortex-A53 2.38 15.5 (+115%) 10.0 (+150%(***))
# Cortex-A57 2.31 11.6 (+86%) 7.51 (+260%(***))
# Denver 2.01 10.5 (+26%) 6.70 (+8%)
# X-Gene 20.0 (+100%) 12.8 (+300%(***))
# Mongoose 2.36 13.0 (+50%) 8.36 (+33%)
# Kryo 1.92 17.4 (+30%) 11.2 (+8%)
#
# (*) Software SHA256 results are of lesser relevance, presented
# mostly for informational purposes.
# (**) The result is a trade-off: it's possible to improve it by
# 10% (or by 1 cycle per round), but at the cost of 20% loss
# on Cortex-A53 (or by 4 cycles per round).
# (***) Super-impressive coefficients over gcc-generated code are
# indication of some compiler "pathology", most notably code
# generated with -mgeneral-regs-only is significantly faster
# and the gap is only 40-90%.
$output=pop;
$flavour=pop;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
*STDOUT=*OUT;
} else {
open OUT,">$output";
*STDOUT=*OUT;
}
if ($output =~ /512/) {
$BITS=512;
$SZ=8;
@Sigma0=(28,34,39);
@Sigma1=(14,18,41);
@sigma0=(1, 8, 7);
@sigma1=(19,61, 6);
$rounds=80;
$reg_t="x";
} else {
$BITS=256;
$SZ=4;
@Sigma0=( 2,13,22);
@Sigma1=( 6,11,25);
@sigma0=( 7,18, 3);
@sigma1=(17,19,10);
$rounds=64;
$reg_t="w";
}
$func="sha${BITS}_block_data_order";
($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
@X=map("$reg_t$_",(3..15,0..2));
@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27));
($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28));
sub BODY_00_xx {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
my $j=($i+1)&15;
my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]);
$T0=@X[$i+3] if ($i<11);
$code.=<<___ if ($i<16);
#ifndef __AARCH64EB__
rev @X[$i],@X[$i] // $i
#endif
___
$code.=<<___ if ($i<13 && ($i&1));
ldp @X[$i+1],@X[$i+2],[$inp],#2*$SZ
___
$code.=<<___ if ($i==13);
ldp @X[14],@X[15],[$inp]
___
$code.=<<___ if ($i>=14);
ldr @X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`]
___
$code.=<<___ if ($i>0 && $i<16);
add $a,$a,$t1 // h+=Sigma0(a)
___
$code.=<<___ if ($i>=11);
str @X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`]
___
# While ARMv8 specifies merged rotate-n-logical operation such as
# 'eor x,y,z,ror#n', it was found to negatively affect performance
# on Apple A7. The reason seems to be that it requires even 'y' to
# be available earlier. This means that such merged instruction is
# not necessarily best choice on critical path... On the other hand
# Cortex-A5x handles merged instructions much better than disjoint
# rotate and logical... See (**) footnote above.
$code.=<<___ if ($i<15);
ror $t0,$e,#$Sigma1[0]
add $h,$h,$t2 // h+=K[i]
eor $T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]`
and $t1,$f,$e
bic $t2,$g,$e
add $h,$h,@X[$i&15] // h+=X[i]
orr $t1,$t1,$t2 // Ch(e,f,g)
eor $t2,$a,$b // a^b, b^c in next round
eor $t0,$t0,$T0,ror#$Sigma1[1] // Sigma1(e)
ror $T0,$a,#$Sigma0[0]
add $h,$h,$t1 // h+=Ch(e,f,g)
eor $t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]`
add $h,$h,$t0 // h+=Sigma1(e)
and $t3,$t3,$t2 // (b^c)&=(a^b)
add $d,$d,$h // d+=h
eor $t3,$t3,$b // Maj(a,b,c)
eor $t1,$T0,$t1,ror#$Sigma0[1] // Sigma0(a)
add $h,$h,$t3 // h+=Maj(a,b,c)
ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round
//add $h,$h,$t1 // h+=Sigma0(a)
___
$code.=<<___ if ($i>=15);
ror $t0,$e,#$Sigma1[0]
add $h,$h,$t2 // h+=K[i]
ror $T1,@X[($j+1)&15],#$sigma0[0]
and $t1,$f,$e
ror $T2,@X[($j+14)&15],#$sigma1[0]
bic $t2,$g,$e
ror $T0,$a,#$Sigma0[0]
add $h,$h,@X[$i&15] // h+=X[i]
eor $t0,$t0,$e,ror#$Sigma1[1]
eor $T1,$T1,@X[($j+1)&15],ror#$sigma0[1]
orr $t1,$t1,$t2 // Ch(e,f,g)
eor $t2,$a,$b // a^b, b^c in next round
eor $t0,$t0,$e,ror#$Sigma1[2] // Sigma1(e)
eor $T0,$T0,$a,ror#$Sigma0[1]
add $h,$h,$t1 // h+=Ch(e,f,g)
and $t3,$t3,$t2 // (b^c)&=(a^b)
eor $T2,$T2,@X[($j+14)&15],ror#$sigma1[1]
eor $T1,$T1,@X[($j+1)&15],lsr#$sigma0[2] // sigma0(X[i+1])
add $h,$h,$t0 // h+=Sigma1(e)
eor $t3,$t3,$b // Maj(a,b,c)
eor $t1,$T0,$a,ror#$Sigma0[2] // Sigma0(a)
eor $T2,$T2,@X[($j+14)&15],lsr#$sigma1[2] // sigma1(X[i+14])
add @X[$j],@X[$j],@X[($j+9)&15]
add $d,$d,$h // d+=h
add $h,$h,$t3 // h+=Maj(a,b,c)
ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round
add @X[$j],@X[$j],$T1
add $h,$h,$t1 // h+=Sigma0(a)
add @X[$j],@X[$j],$T2
___
($t2,$t3)=($t3,$t2);
}
$code.=<<___;
#ifndef __KERNEL__
# include <openssl/arm_arch.h>
#endif
.text
.extern OPENSSL_armcap_P
.hidden OPENSSL_armcap_P
.globl $func
.type $func,%function
.align 6
$func:
AARCH64_VALID_CALL_TARGET
#ifndef __KERNEL__
#if __has_feature(hwaddress_sanitizer) && __clang_major__ >= 10
adrp x16,:pg_hi21_nc:OPENSSL_armcap_P
#else
adrp x16,:pg_hi21:OPENSSL_armcap_P
#endif
ldr w16,[x16,:lo12:OPENSSL_armcap_P]
___
$code.=<<___ if ($SZ==4);
tst w16,#ARMV8_SHA256
b.ne .Lv8_entry
___
$code.=<<___ if ($SZ==8);
tst w16,#ARMV8_SHA512
b.ne .Lv8_entry
___
$code.=<<___;
#endif
AARCH64_SIGN_LINK_REGISTER
stp x29,x30,[sp,#-128]!
add x29,sp,#0
stp x19,x20,[sp,#16]
stp x21,x22,[sp,#32]
stp x23,x24,[sp,#48]
stp x25,x26,[sp,#64]
stp x27,x28,[sp,#80]
sub sp,sp,#4*$SZ
ldp $A,$B,[$ctx] // load context
ldp $C,$D,[$ctx,#2*$SZ]
ldp $E,$F,[$ctx,#4*$SZ]
add $num,$inp,$num,lsl#`log(16*$SZ)/log(2)` // end of input
ldp $G,$H,[$ctx,#6*$SZ]
adrp $Ktbl,:pg_hi21:.LK$BITS
add $Ktbl,$Ktbl,:lo12:.LK$BITS
stp $ctx,$num,[x29,#96]
.Loop:
ldp @X[0],@X[1],[$inp],#2*$SZ
ldr $t2,[$Ktbl],#$SZ // *K++
eor $t3,$B,$C // magic seed
str $inp,[x29,#112]
___
for ($i=0;$i<16;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
$code.=".Loop_16_xx:\n";
for (;$i<32;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
cbnz $t2,.Loop_16_xx
ldp $ctx,$num,[x29,#96]
ldr $inp,[x29,#112]
sub $Ktbl,$Ktbl,#`$SZ*($rounds+1)` // rewind
ldp @X[0],@X[1],[$ctx]
ldp @X[2],@X[3],[$ctx,#2*$SZ]
add $inp,$inp,#14*$SZ // advance input pointer
ldp @X[4],@X[5],[$ctx,#4*$SZ]
add $A,$A,@X[0]
ldp @X[6],@X[7],[$ctx,#6*$SZ]
add $B,$B,@X[1]
add $C,$C,@X[2]
add $D,$D,@X[3]
stp $A,$B,[$ctx]
add $E,$E,@X[4]
add $F,$F,@X[5]
stp $C,$D,[$ctx,#2*$SZ]
add $G,$G,@X[6]
add $H,$H,@X[7]
cmp $inp,$num
stp $E,$F,[$ctx,#4*$SZ]
stp $G,$H,[$ctx,#6*$SZ]
b.ne .Loop
ldp x19,x20,[x29,#16]
add sp,sp,#4*$SZ
ldp x21,x22,[x29,#32]
ldp x23,x24,[x29,#48]
ldp x25,x26,[x29,#64]
ldp x27,x28,[x29,#80]
ldp x29,x30,[sp],#128
AARCH64_VALIDATE_LINK_REGISTER
ret
.size $func,.-$func
.section .rodata
.align 6
.type .LK$BITS,%object
.LK$BITS:
___
$code.=<<___ if ($SZ==8);
.quad 0x428a2f98d728ae22,0x7137449123ef65cd
.quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
.quad 0x3956c25bf348b538,0x59f111f1b605d019
.quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118
.quad 0xd807aa98a3030242,0x12835b0145706fbe
.quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
.quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1
.quad 0x9bdc06a725c71235,0xc19bf174cf692694
.quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3
.quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
.quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483
.quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5
.quad 0x983e5152ee66dfab,0xa831c66d2db43210
.quad 0xb00327c898fb213f,0xbf597fc7beef0ee4
.quad 0xc6e00bf33da88fc2,0xd5a79147930aa725
.quad 0x06ca6351e003826f,0x142929670a0e6e70
.quad 0x27b70a8546d22ffc,0x2e1b21385c26c926
.quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df
.quad 0x650a73548baf63de,0x766a0abb3c77b2a8
.quad 0x81c2c92e47edaee6,0x92722c851482353b
.quad 0xa2bfe8a14cf10364,0xa81a664bbc423001
.quad 0xc24b8b70d0f89791,0xc76c51a30654be30
.quad 0xd192e819d6ef5218,0xd69906245565a910
.quad 0xf40e35855771202a,0x106aa07032bbd1b8
.quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53
.quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
.quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
.quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
.quad 0x748f82ee5defb2fc,0x78a5636f43172f60
.quad 0x84c87814a1f0ab72,0x8cc702081a6439ec
.quad 0x90befffa23631e28,0xa4506cebde82bde9
.quad 0xbef9a3f7b2c67915,0xc67178f2e372532b
.quad 0xca273eceea26619c,0xd186b8c721c0c207
.quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
.quad 0x06f067aa72176fba,0x0a637dc5a2c898a6
.quad 0x113f9804bef90dae,0x1b710b35131c471b
.quad 0x28db77f523047d84,0x32caab7b40c72493
.quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
.quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a
.quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817
.quad 0 // terminator
___
$code.=<<___ if ($SZ==4);
.long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
.long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
.long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
.long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
.long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
.long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
.long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
.long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
.long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
.long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
.long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
.long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070
.long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
.long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
.long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
.long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
.long 0 //terminator
___
$code.=<<___;
.size .LK$BITS,.-.LK$BITS
.asciz "SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
___
if ($SZ==4) {
my $Ktbl="x3";
my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2));
my @MSG=map("v$_.16b",(4..7));
my ($W0,$W1)=("v16.4s","v17.4s");
my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
$code.=<<___;
.text
#ifndef __KERNEL__
.type sha256_block_armv8,%function
.align 6
sha256_block_armv8:
.Lv8_entry:
// Armv8.3-A PAuth: even though x30 is pushed to stack it is not popped later.
stp x29,x30,[sp,#-16]!
add x29,sp,#0
ld1.32 {$ABCD,$EFGH},[$ctx]
adrp $Ktbl,:pg_hi21:.LK256
add $Ktbl,$Ktbl,:lo12:.LK256
.Loop_hw:
ld1 {@MSG[0]-@MSG[3]},[$inp],#64
sub $num,$num,#1
ld1.32 {$W0},[$Ktbl],#16
rev32 @MSG[0],@MSG[0]
rev32 @MSG[1],@MSG[1]
rev32 @MSG[2],@MSG[2]
rev32 @MSG[3],@MSG[3]
orr $ABCD_SAVE,$ABCD,$ABCD // offload
orr $EFGH_SAVE,$EFGH,$EFGH
___
for($i=0;$i<12;$i++) {
$code.=<<___;
ld1.32 {$W1},[$Ktbl],#16
add.i32 $W0,$W0,@MSG[0]
sha256su0 @MSG[0],@MSG[1]
orr $abcd,$ABCD,$ABCD
sha256h $ABCD,$EFGH,$W0
sha256h2 $EFGH,$abcd,$W0
sha256su1 @MSG[0],@MSG[2],@MSG[3]
___
($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
}
$code.=<<___;
ld1.32 {$W1},[$Ktbl],#16
add.i32 $W0,$W0,@MSG[0]
orr $abcd,$ABCD,$ABCD
sha256h $ABCD,$EFGH,$W0
sha256h2 $EFGH,$abcd,$W0
ld1.32 {$W0},[$Ktbl],#16
add.i32 $W1,$W1,@MSG[1]
orr $abcd,$ABCD,$ABCD
sha256h $ABCD,$EFGH,$W1
sha256h2 $EFGH,$abcd,$W1
ld1.32 {$W1},[$Ktbl]
add.i32 $W0,$W0,@MSG[2]
sub $Ktbl,$Ktbl,#$rounds*$SZ-16 // rewind
orr $abcd,$ABCD,$ABCD
sha256h $ABCD,$EFGH,$W0
sha256h2 $EFGH,$abcd,$W0
add.i32 $W1,$W1,@MSG[3]
orr $abcd,$ABCD,$ABCD
sha256h $ABCD,$EFGH,$W1
sha256h2 $EFGH,$abcd,$W1
add.i32 $ABCD,$ABCD,$ABCD_SAVE
add.i32 $EFGH,$EFGH,$EFGH_SAVE
cbnz $num,.Loop_hw
st1.32 {$ABCD,$EFGH},[$ctx]
ldr x29,[sp],#16
ret
.size sha256_block_armv8,.-sha256_block_armv8
#endif
___
}
if ($SZ==8) {
my $Ktbl="x3";
my @H = map("v$_.16b",(0..4));
my ($fg,$de,$m9_10)=map("v$_.16b",(5..7));
my @MSG=map("v$_.16b",(16..23));
my ($W0,$W1)=("v24.2d","v25.2d");
my ($AB,$CD,$EF,$GH)=map("v$_.16b",(26..29));
$code.=<<___;
.text
#ifndef __KERNEL__
.type sha512_block_armv8,%function
.align 6
sha512_block_armv8:
.Lv8_entry:
stp x29,x30,[sp,#-16]!
add x29,sp,#0
ld1 {@MSG[0]-@MSG[3]},[$inp],#64 // load input
ld1 {@MSG[4]-@MSG[7]},[$inp],#64
ld1.64 {@H[0]-@H[3]},[$ctx] // load context
adrp $Ktbl,:pg_hi21:.LK512
add $Ktbl,$Ktbl,:lo12:.LK512
rev64 @MSG[0],@MSG[0]
rev64 @MSG[1],@MSG[1]
rev64 @MSG[2],@MSG[2]
rev64 @MSG[3],@MSG[3]
rev64 @MSG[4],@MSG[4]
rev64 @MSG[5],@MSG[5]
rev64 @MSG[6],@MSG[6]
rev64 @MSG[7],@MSG[7]
b .Loop_hw
.align 4
.Loop_hw:
ld1.64 {$W0},[$Ktbl],#16
subs $num,$num,#1
sub x4,$inp,#128
orr $AB,@H[0],@H[0] // offload
orr $CD,@H[1],@H[1]
orr $EF,@H[2],@H[2]
orr $GH,@H[3],@H[3]
csel $inp,$inp,x4,ne // conditional rewind
___
for($i=0;$i<32;$i++) {
$code.=<<___;
add.i64 $W0,$W0,@MSG[0]
ld1.64 {$W1},[$Ktbl],#16
ext $W0,$W0,$W0,#8
ext $fg,@H[2],@H[3],#8
ext $de,@H[1],@H[2],#8
add.i64 @H[3],@H[3],$W0 // "T1 + H + K512[i]"
sha512su0 @MSG[0],@MSG[1]
ext $m9_10,@MSG[4],@MSG[5],#8
sha512h @H[3],$fg,$de
sha512su1 @MSG[0],@MSG[7],$m9_10
add.i64 @H[4],@H[1],@H[3] // "D + T1"
sha512h2 @H[3],$H[1],@H[0]
___
($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
@H = (@H[3],@H[0],@H[4],@H[2],@H[1]);
}
for(;$i<40;$i++) {
$code.=<<___ if ($i<39);
ld1.64 {$W1},[$Ktbl],#16
___
$code.=<<___ if ($i==39);
sub $Ktbl,$Ktbl,#$rounds*$SZ // rewind
___
$code.=<<___;
add.i64 $W0,$W0,@MSG[0]
ld1 {@MSG[0]},[$inp],#16 // load next input
ext $W0,$W0,$W0,#8
ext $fg,@H[2],@H[3],#8
ext $de,@H[1],@H[2],#8
add.i64 @H[3],@H[3],$W0 // "T1 + H + K512[i]"
sha512h @H[3],$fg,$de
rev64 @MSG[0],@MSG[0]
add.i64 @H[4],@H[1],@H[3] // "D + T1"
sha512h2 @H[3],$H[1],@H[0]
___
($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
@H = (@H[3],@H[0],@H[4],@H[2],@H[1]);
}
$code.=<<___;
add.i64 @H[0],@H[0],$AB // accumulate
add.i64 @H[1],@H[1],$CD
add.i64 @H[2],@H[2],$EF
add.i64 @H[3],@H[3],$GH
cbnz $num,.Loop_hw
st1.64 {@H[0]-@H[3]},[$ctx] // store context
ldr x29,[sp],#16
ret
.size sha512_block_armv8,.-sha512_block_armv8
#endif
___
}
{ my %opcode = (
"sha256h" => 0x5e004000, "sha256h2" => 0x5e005000,
"sha256su0" => 0x5e282800, "sha256su1" => 0x5e006000 );
sub unsha256 {
my ($mnemonic,$arg)=@_;
$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
&&
sprintf ".inst\t0x%08x\t//%s %s",
$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
$mnemonic,$arg;
}
}
{ my %opcode = (
"sha512h" => 0xce608000, "sha512h2" => 0xce608400,
"sha512su0" => 0xcec08000, "sha512su1" => 0xce608800 );
sub unsha512 {
my ($mnemonic,$arg)=@_;
$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
&&
sprintf ".inst\t0x%08x\t//%s %s",
$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
$mnemonic,$arg;
}
}
open SELF,$0;
while(<SELF>) {
next if (/^#!/);
last if (!s/^#/\/\// and !/^$/);
print;
}
close SELF;
foreach(split("\n",$code)) {
s/\`([^\`]*)\`/eval($1)/ge;
s/\b(sha512\w+)\s+([qv].*)/unsha512($1,$2)/ge or
s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
s/\bq([0-9]+)\b/v$1.16b/g; # old->new registers
s/\.[ui]?8(\s)/$1/;
s/\.\w?64\b// and s/\.16b/\.2d/g or
s/\.\w?32\b// and s/\.16b/\.4s/g;
m/\bext\b/ and s/\.2d/\.16b/g or
m/(ld|st)1[^\[]+\[0\]/ and s/\.4s/\.s/g;
print $_,"\n";
}
close STDOUT or die "error closing STDOUT: $!";